| .. |
|
devices
|
ARM: imx: prepare for removal of flexcan_platform_data
|
2013-06-27 15:15:08 +02:00 |
|
3ds_debugboard.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
3ds_debugboard.h
|
ARM: imx: include board headers in the same folder
|
2012-10-15 09:18:14 +08:00 |
|
anatop.c
|
ARM: imx: use imx_init_revision_from_anatop() on imx6sl
|
2013-10-21 09:13:13 +08:00 |
|
avic.c
|
ARM: imx: drop support for irq priorisation
|
2013-12-09 13:18:25 +08:00 |
|
board-mx31lilly.h
|
ARM: imx: include board headers in the same folder
|
2012-10-15 09:18:14 +08:00 |
|
board-mx31lite.h
|
ARM: imx: include board headers in the same folder
|
2012-10-15 09:18:14 +08:00 |
|
board-mx31moboard.h
|
ARM: imx: include board headers in the same folder
|
2012-10-15 09:18:14 +08:00 |
|
board-pcm038.h
|
ARM: imx: include board headers in the same folder
|
2012-10-15 09:18:14 +08:00 |
|
clk-busy.c
|
ARM: arm-soc non-critical fixes for 3.10
|
2013-05-02 08:56:55 -07:00 |
|
clk-fixup-div.c
|
ARM: imx: add common clock support for fixup div
|
2013-08-16 13:11:24 +08:00 |
|
clk-fixup-mux.c
|
ARM: imx: initialize clk_init_data.flags for clk-fixup-mux
|
2013-09-17 10:04:23 +08:00 |
|
clk-gate2.c
|
ARM: imx: improve status check of clock gate
|
2013-12-31 09:36:46 +08:00 |
|
clk-imx1.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
clk-imx6q.c
|
ARM: imx6: Initialize low-power mode early again
|
2014-02-10 10:37:32 -08:00 |
|
clk-imx6sl.c
|
ARM: imx6: Initialize low-power mode early again
|
2014-02-10 10:37:32 -08:00 |
|
clk-imx21.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
clk-imx25.c
|
ARM: i.MX25: clk: parent per5_clk to AHB clock
|
2013-02-05 10:54:35 +01:00 |
|
clk-imx27.c
|
ARM: i.MX: change dev_id to cpu0 while registering cpu clock
|
2013-09-19 03:53:44 +02:00 |
|
clk-imx31.c
|
Linux 3.8-rc6
|
2013-02-04 22:56:41 -08:00 |
|
clk-imx35.c
|
ARM i.MX35: Add devicetree support.
|
2013-12-31 09:36:40 +08:00 |
|
clk-imx51-imx53.c
|
ARM i.MX5: fix obvious typo in ldb_di0_gate clk definition
|
2013-12-31 09:36:31 +08:00 |
|
clk-pfd.c
|
ARM: imx: add necessary interface for pfd
|
2013-12-31 09:36:45 +08:00 |
|
clk-pllv1.c
|
ARM: imx: pllv1: Fix PLL calculation for i.MX27
|
2013-12-31 09:36:29 +08:00 |
|
clk-pllv2.c
|
ARM: mach-imx: clk-pllv2: Staticize clk_pllv2_ops
|
2013-04-01 16:17:50 +08:00 |
|
clk-pllv3.c
|
ARM: imx: set up pllv3 POWER and BYPASS sequentially
|
2013-11-11 22:58:45 +08:00 |
|
clk-vf610.c
|
ARM: imx: Add DMAMUX clock for Vybrid vf610 SoC
|
2013-12-09 13:18:31 +08:00 |
|
clk.c
|
ARM: imx6: change some clocks to fixup clocks
|
2013-08-16 13:11:25 +08:00 |
|
clk.h
|
The common clk framework changes for 3.12 are dominated by clock driver
|
2013-09-09 15:49:04 -07:00 |
|
common.h
|
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
|
2014-02-18 16:03:43 -08:00 |
|
cpu-imx5.c
|
ARM: mach-imx: cpu-imx5: Include "common.h"
|
2013-04-01 16:17:49 +08:00 |
|
cpu-imx25.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
cpu-imx27.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
cpu-imx31.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
cpu-imx35.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
cpu.c
|
ARM: imx: Include linux/err.h
|
2013-10-21 09:15:12 +08:00 |
|
cpuidle-imx5.c
|
ARM: imx: cpuidle: use init/exit common routine
|
2013-04-23 13:45:23 +02:00 |
|
cpuidle-imx6q.c
|
ARM: imx: cpuidle: use init/exit common routine
|
2013-04-23 13:45:23 +02:00 |
|
cpuidle.h
|
ARM: imx: cpuidle: use init/exit common routine
|
2013-04-23 13:45:23 +02:00 |
|
crm-regs-imx5.h
|
ARM i.MX53: Fix PLL4 base address
|
2012-06-04 15:23:57 +02:00 |
|
crmregs-imx3.h
|
ARM i.MX3: Make ccm base address a variable
|
2012-04-25 17:03:45 +02:00 |
|
devices-imx1.h
|
ARM: imx: move platform device code into mach-imx
|
2012-10-15 09:18:15 +08:00 |
|
devices-imx21.h
|
ARM: imx: move platform device code into mach-imx
|
2012-10-15 09:18:15 +08:00 |
|
devices-imx25.h
|
ARM: imx: prepare for removal of flexcan_platform_data
|
2013-06-27 15:15:08 +02:00 |
|
devices-imx27.h
|
ARM : i.MX27 : split code for allocation of ressources of camera and eMMA
|
2012-11-16 16:21:48 +01:00 |
|
devices-imx31.h
|
ARM: imx: move platform device code into mach-imx
|
2012-10-15 09:18:15 +08:00 |
|
devices-imx35.h
|
ARM: imx: prepare for removal of flexcan_platform_data
|
2013-06-27 15:15:08 +02:00 |
|
devices-imx51.h
|
ARM: imx: move platform device code into mach-imx
|
2012-10-15 09:18:15 +08:00 |
|
ehci-imx5.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
ehci-imx25.c
|
Merge branch 'next/cam-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
|
2012-11-30 09:27:57 -08:00 |
|
ehci-imx27.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
ehci-imx31.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
ehci-imx35.c
|
Merge branch 'next/cam-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
|
2012-11-30 09:27:57 -08:00 |
|
epit.c
|
ARM: imx: remove IRQF_DISABLED
|
2013-10-21 09:11:05 +08:00 |
|
eukrea_mbimx27-baseboard.c
|
ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro
|
2013-04-03 16:50:54 +08:00 |
|
eukrea_mbimxsd25-baseboard.c
|
ARM: imx: prepare for removal of flexcan_platform_data
|
2013-06-27 15:15:08 +02:00 |
|
eukrea_mbimxsd35-baseboard.c
|
ARM: imx: prepare for removal of flexcan_platform_data
|
2013-06-27 15:15:08 +02:00 |
|
eukrea_mbimxsd51-baseboard.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
eukrea-baseboards.h
|
ARM: imx: include board headers in the same folder
|
2012-10-15 09:18:14 +08:00 |
|
gpc.c
|
ARM: imx: ensure dsm_request signal is not asserted when setting LPM
|
2013-10-21 09:39:26 +08:00 |
|
hardware.h
|
ARM: imx: include <asm/io.h> in hardware.h
|
2013-06-17 15:45:10 +08:00 |
|
headsmp.S
|
ARM: imx: replicate the diagnostic register of boot cpu into secondary cores
|
2013-05-12 21:39:18 +08:00 |
|
hotplug.c
|
ARM: imx: do not return from imx_cpu_die() call
|
2013-10-21 09:37:31 +08:00 |
|
iim.h
|
ARM: imx: include iim.h rather than mach/iim.h
|
2012-10-15 10:03:10 +08:00 |
|
imx25-dt.c
|
ARM: imx: create mxc_arch_reset_init_dt() for DT boot
|
2013-06-17 15:45:10 +08:00 |
|
imx27-dt.c
|
ARM: imx: create mxc_arch_reset_init_dt() for DT boot
|
2013-06-17 15:45:10 +08:00 |
|
imx31-dt.c
|
ARM: imx: use __initconst for const init definition
|
2013-12-31 09:36:33 +08:00 |
|
imx35-dt.c
|
ARM i.MX35: Add devicetree support.
|
2013-12-31 09:36:40 +08:00 |
|
imx51-dt.c
|
ARM: imx: use __initconst for const init definition
|
2013-12-31 09:36:33 +08:00 |
|
iomux-imx31.c
|
ARM: mach-imx: iomux-imx31: Staticize mxc_pin_alloc_map
|
2013-04-01 16:17:48 +08:00 |
|
iomux-mx1.h
|
ARM: imx: move iomux drivers and headers into mach-imx
|
2012-10-15 09:18:14 +08:00 |
|
iomux-mx2x.h
|
ARM: imx: move iomux drivers and headers into mach-imx
|
2012-10-15 09:18:14 +08:00 |
|
iomux-mx3.h
|
ARM: imx: move iomux drivers and headers into mach-imx
|
2012-10-15 09:18:14 +08:00 |
|
iomux-mx21.h
|
ARM: imx: move iomux drivers and headers into mach-imx
|
2012-10-15 09:18:14 +08:00 |
|
iomux-mx25.h
|
ARM: imx: move iomux drivers and headers into mach-imx
|
2012-10-15 09:18:14 +08:00 |
|
iomux-mx27.h
|
ARM: imx: move iomux drivers and headers into mach-imx
|
2012-10-15 09:18:14 +08:00 |
|
iomux-mx35.h
|
ARM: imx: move iomux drivers and headers into mach-imx
|
2012-10-15 09:18:14 +08:00 |
|
iomux-mx51.h
|
ARM: imx: move iomux drivers and headers into mach-imx
|
2012-10-15 09:18:14 +08:00 |
|
iomux-v1.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
iomux-v1.h
|
ARM: imx: move iomux drivers and headers into mach-imx
|
2012-10-15 09:18:14 +08:00 |
|
iomux-v3.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
iomux-v3.h
|
ARM: imx: move iomux drivers and headers into mach-imx
|
2012-10-15 09:18:14 +08:00 |
|
irq-common.c
|
ARM: imx: irq-common: Include header to avoid sparse warning
|
2013-06-17 15:45:14 +08:00 |
|
irq-common.h
|
ARM: imx: drop support for irq priorisation
|
2013-12-09 13:18:25 +08:00 |
|
Kconfig
|
ARM: SoC platform changes for 3.14
|
2014-01-23 18:40:49 -08:00 |
|
mach-apf9328.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-armadillo5x0.c
|
ARM: imx: remove IRQF_DISABLED
|
2013-10-21 09:11:05 +08:00 |
|
mach-bug.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-cpuimx27.c
|
ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro
|
2013-04-03 16:50:54 +08:00 |
|
mach-cpuimx35.c
|
Input: tsc2007 - add device tree support.
|
2013-11-25 18:27:53 -08:00 |
|
mach-cpuimx51sd.c
|
Input: tsc2007 - add device tree support.
|
2013-11-25 18:27:53 -08:00 |
|
mach-eukrea_cpuimx25.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-imx6q.c
|
Merge branch 'cubox-i-init' into for-linus
|
2014-01-28 21:38:58 +00:00 |
|
mach-imx6sl.c
|
ARM: imx: Add cpu frequency scaling support
|
2013-12-31 09:36:41 +08:00 |
|
mach-imx27_visstrim_m10.c
|
gpio: (gpio-pca953x) move header to linux/platform_data/
|
2013-08-29 12:33:52 -07:00 |
|
mach-imx27ipcam.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-imx27lite.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-imx50.c
|
ARM: imx: use __initconst for const init definition
|
2013-12-31 09:36:33 +08:00 |
|
mach-imx53.c
|
ARM: imx: use __initconst for const init definition
|
2013-12-31 09:36:33 +08:00 |
|
mach-kzm_arm11_01.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-mx1ads.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-mx21ads.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-mx25_3ds.c
|
ARM: imx: prepare for removal of flexcan_platform_data
|
2013-06-27 15:15:08 +02:00 |
|
mach-mx27_3ds.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-mx27ads.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-mx31_3ds.c
|
ARM: imx: remove IRQF_DISABLED
|
2013-10-21 09:11:05 +08:00 |
|
mach-mx31ads.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-mx31lilly.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-mx31lite.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-mx31moboard.c
|
serial: imx: Remove init() and exit() platform callbacks
|
2014-02-28 16:36:45 -08:00 |
|
mach-mx35_3ds.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-mx51_babbage.c
|
ARM: imx: Remove cpufreq driver
|
2013-04-01 16:17:34 +08:00 |
|
mach-mxt_td60.c
|
gpio: (gpio-pca953x) move header to linux/platform_data/
|
2013-08-29 12:33:52 -07:00 |
|
mach-pca100.c
|
treewide: Fix typos in printk
|
2013-12-19 15:10:49 +01:00 |
|
mach-pcm037_eet.c
|
ARM: imx: include common.h rather than mach/common.h
|
2012-10-15 10:03:10 +08:00 |
|
mach-pcm037.c
|
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
|
2013-11-18 15:50:07 -08:00 |
|
mach-pcm038.c
|
misc: (at24) move header to linux/platform_data/
|
2013-09-30 06:02:34 +02:00 |
|
mach-pcm043.c
|
misc: (at24) move header to linux/platform_data/
|
2013-09-30 06:02:34 +02:00 |
|
mach-qong.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-scb9328.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
mach-vf610.c
|
ARM: imx: use __initconst for const init definition
|
2013-12-31 09:36:33 +08:00 |
|
mach-vpr200.c
|
misc: (at24) move header to linux/platform_data/
|
2013-09-30 06:02:34 +02:00 |
|
Makefile
|
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
|
2014-02-18 16:03:43 -08:00 |
|
mm-imx1.c
|
ARM: imx: move clk_prepare() out from mxc_restart()
|
2013-06-17 15:45:10 +08:00 |
|
mm-imx3.c
|
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
|
2013-07-03 09:46:29 -07:00 |
|
mm-imx5.c
|
ARM: imx: remove mxc_iomux_v3_init() call from imx53_init_early()
|
2013-12-09 13:18:24 +08:00 |
|
mm-imx21.c
|
ARM: imx: move clk_prepare() out from mxc_restart()
|
2013-06-17 15:45:10 +08:00 |
|
mm-imx25.c
|
ARM: i.MX: remove sdma script address arrays from platform data
|
2013-08-26 20:47:16 +05:30 |
|
mm-imx27.c
|
ARM: imx: move clk_prepare() out from mxc_restart()
|
2013-06-17 15:45:10 +08:00 |
|
mmdc.c
|
ARM: drivers: remove __dev* attributes.
|
2013-01-03 15:57:04 -08:00 |
|
mx1-camera-fiq-ksym.c
|
ARM: imx: move platform_data definitions
|
2012-09-14 11:17:21 +02:00 |
|
mx1-camera-fiq.S
|
ARM: imx: move mx1 support to mach-imx
|
2010-06-30 08:59:44 +02:00 |
|
mx1.h
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx2x.h
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx3x.h
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx21.h
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx25.h
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx27.h
|
ARM: i.MX27: Typo fix
|
2013-07-15 08:28:07 +08:00 |
|
mx31.h
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx31lilly-db.c
|
ARM: imx: remove IRQF_DISABLED
|
2013-10-21 09:11:05 +08:00 |
|
mx31lite-db.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx31moboard-devboard.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx31moboard-marxbot.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx31moboard-smartbot.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx35.h
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx51.h
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mx53.h
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
mxc.h
|
ARM: imx: enable suspend for imx6sl
|
2013-10-21 09:39:27 +08:00 |
|
pcm037.h
|
ARM: imx: use machine specific hook for late init
|
2012-05-08 20:36:16 +08:00 |
|
pcm970-baseboard.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
platsmp.c
|
ARM: clean up cache handling in platform code
|
2013-12-11 16:24:34 -08:00 |
|
pm-imx3.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
pm-imx5.c
|
ARM: mx53: Allow suspend/resume
|
2013-08-22 23:20:45 +08:00 |
|
pm-imx6q.c
|
ARM: imx6: Initialize low-power mode early again
|
2014-02-10 10:37:32 -08:00 |
|
pm-imx27.c
|
ARM: imx: include hardware.h rather than mach/hardware.h
|
2012-10-15 10:05:43 +08:00 |
|
src.c
|
ARM: imx: remove imx_src_prepare_restart() call
|
2013-11-11 22:58:43 +08:00 |
|
ssi-fiq-ksym.c
|
ARM: imx: merge plat-mxc into mach-imx
|
2012-10-15 10:02:19 +08:00 |
|
ssi-fiq.S
|
ARM: imx: merge plat-mxc into mach-imx
|
2012-10-15 10:02:19 +08:00 |
|
system.c
|
ARM: imx: improve mxc_restart() on the SRC bit writes
|
2013-11-11 22:58:43 +08:00 |
|
time.c
|
ARM: imx: Switch to sched_clock_register()
|
2013-11-21 15:40:59 -08:00 |
|
tzic.c
|
ARM: mach-imx: tzic: Staticize *tzic_base
|
2013-04-01 16:17:51 +08:00 |
|
ulpi.h
|
ARM: imx: Remove mxc specific ulpi access ops
|
2013-06-17 15:45:16 +08:00 |
45af780a0f