In order to support the HDMI2.0 YUV420 display modes, this patch
adds support for the YUV420 TMDS Clock divided by 2 and the controller
passthrough mode.
YUV420 Synopsys PHY support will need some specific configuration table
to support theses modes.
This patch is based on work from Zheng Yang <zhengyang@rock-chips.com> in
the Rockchip Linux 4.4 BSP at [1]
[1] https://github.com/rockchip-linux/kernel/tree/release-4.4
Cc: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-5-git-send-email-narmstrong@baylibre.com
Now we support the TMDS Clock > 3.4GHz and support the SCDC Control
operation in the DW-HDMI Controller, we can enable support for the
HDMI2.0 3840x2160@60/50 RGB444 display modes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-4-git-send-email-narmstrong@baylibre.com
Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS
Scrambling when supported or mandatory.
This patch also adds an helper to setup the control bit to support
the high TMDS Bit Period/TMDS Clock-Period Ratio as required with
TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes.
These changes were based on work done by Huicong Xu <xhc@rock-chips.com>
and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes
on the Rockchip 4.4 BSP kernel at [1]
[1] https://github.com/rockchip-linux/kernel/tree/release-4.4
Cc: Nickey Yang <nickey.yang@rock-chips.com>
Cc: Huicong Xu <xhc@rock-chips.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-2-git-send-email-narmstrong@baylibre.com
Drivers shouldn't be using these values, add a TODO so someone removes
them.
Changes in v2:
- Add drm_display_mode.vrefresh removal (Ville)
- Add Sam's R-b and bonus points
Changes in v3:
- Add hsync removal todo item (Daniel)
- Change vrefresh wording to make removal less optional
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Bonus-points-awarded-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129192637.73296-1-sean@poorly.run
Decode the NAK reply fields to make it easier to parse the logs.
v2: s/STR/DP_STR/ to avoid conflict with some header stuff (0day)
Use drm_dp_mst_req_type_str() more (DK)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-2-ville.syrjala@linux.intel.com
Make the code a bit easier to read by providing symbolic names
for the reply_type (ACK vs. NAK). Also clean up some brace stuff
while at it.
v2: s/DP_REPLY/DP_SIDEBAND_REPLY/ (DK)
Fix some checkpatch issues
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-1-ville.syrjala@linux.intel.com
It only talks about crtc, brings up intel as an example and I think is
more misleading than useful really. Plus we have lots of discussion
about how your standard kms driver should be initialized/cleaned up,
so maybe better to document this when we have a better idea.
v2: Fix typo in commit message (Nicholas).
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-2-daniel.vetter@ffwll.ch
Yes it's inconsitent with vrr_capable, but this is the actual uapi as
exercise by igt.
Fixes: ab7a664f7a ("drm: Document variable refresh properties")
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-3-daniel.vetter@ffwll.ch
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/savage/savage_state.c:301:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:438:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:559:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:697:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129202005.GA25789@embeddedor
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/via/via_dmablit.c:179:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:185:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:187:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:195:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129201742.GA25660@embeddedor
This is only used by drm_irq_install(), which is an optional helper.
For legacy pci devices this is required (due to interrupt sharing without
msi/msi-x), and just making this the default exactly matches the behaviour
of all existing drivers using the drm_irq_install() helpers. In case that
ever becomes wrong drivers can roll their own irq handling, as many
drivers already do (for other reasons like needing a threaded interrupt
handler, or having an entire pile of different interrupt sources).
v2: Rebase
v3: Improve commit message (Emil)
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-3-daniel.vetter@ffwll.ch
And move the documenation we alreay have into kerneldoc, plus a bit of
polish while at it.
v2:
- Ditch FIXME from commit message, I've resolved that already before
sending out the first version.
- Put the legacy DRIVER_ flags at the end (Sam).
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-2-daniel.vetter@ffwll.ch
Both macros evaluate to 0. At the same time flag is already set to
zero since the struct is kzalloc'd in framebuffer_alloc().
As called by drm_fb_helper_alloc_fbi() in the DRM drivers.
v2: Rebase and improve commit message per Emil's suggestion.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124165831.16427-27-daniel.vetter@ffwll.ch
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with
backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5).
Adding device tree bindings for this panel.
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
[eugen.hristev@microchip.com]: specified backlight and supply bindings
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-3-git-send-email-eugen.hristev@microchip.com
Precision Design Associates, Inc. (PDA) manufactures standard and custom
capacitive touch screens, LCD's embedded controllers and custom embedded
software. They specialize in industrial, rugged and outdoor
applications.
Website: http://www.pdaatl.com/
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-2-git-send-email-eugen.hristev@microchip.com
This adds support for the 3.5" LCD panel from LeMaker, sold for use with
BananaPi boards. It comes with a 24-bit RGB888 parallel interface and
requires an active-low DE signal
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-7-contact@paulk.fr
This adds the device-tree bindings for the LeMaker BL035-RGB-002 3.5"
QVGA TFT LCD panel, compatible with simple-panel.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-6-contact@paulk.fr
This introduces a new device-tree binding vendor prefix for Shenzhen
LeMaker Technology Co., Ltd.
This vendor was already in use but it was not documented until now.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Rob Hering <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-5-contact@paulk.fr
Support Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel, it is a MIPI
dual-DSI panel.
v4-resend:
- Thierry noted missing dt-bindings for v4 but forgot that he
already had applied them one kernel release back in
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ebc950fdff6d5f9250cd5a5a348af97f7d8508df
v4:
- address Philipp's comments
- real range for usleep_range and
- poweroff ordering in kingdisplay_panel_prepare
- return value beautification in panel_probe
- update author naming for full name
v3:
- address Thierry's comments
- error handling for init dsi writes in init
- unconditionally remove the panel
- don't use drm_panel_detach
- a bit of variable signednes wiggling
- I did talk to ChromeOS people and the delays really should be as short
as possible, so dropped the 100ms from the delay comments
v2:
- update timing + cmds from chromeos kernel
- new backlight API including switch to devm_of_find_backlight
- fix most of Sean Paul's comments
enable/prepare tracking seems something all panels do
- document origins of the init sequence
- lanes per dsi interface to 4 (two interfaces). Matches how tegra
and pending rockchip dual-dsi handle (dual-)dsi lanes
- spdx header instead of license boilerplate
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030091528.28211-1-heiko@sntech.de
ST7701 designed for small and medium sizes of TFT LCD display, is
capable of supporting up to 480RGBX864 in resolution. It provides
several system interfaces like MIPI/RGB/SPI.
Currently added support for Techstar TS8550B which is ST7701 based
480x854, 2-lane MIPI DSI LCD panel.
Driver now registering mipi_dsi device, but indeed it can extendable
for RGB if any requirement trigger in future.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-2-jagan@amarulasolutions.com
Techstar TS8550B MIPI DSI panel is 480x854, 2-lane MIPI DSI LCD panel
with inbuilt ST7701 chip.
The default regulator names in ST7701 chip is renamed in Techstar TS8550B
so, add specific binding names for them.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-1-jagan@amarulasolutions.com
Add a helper functions to check video modes. Also add a helper to check
framebuffer buffer objects, using the former for consistency. That way
we should not fail in qxl_primary_atomic_check() because video modes
which are too big will not be added to the mode list in the first place.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-21-kraxel@redhat.com
Generic fbdev emulation needs this. Also: We must keep track of the
number of mappings now, so we don't unmap early in case two users want a
kmap of the same bo. Add a sanity check to destroy callback to make
sure kmap/kunmap is balanced.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-17-kraxel@redhat.com
qdev->monitors_config->max_allowed is effectively set by the
qxl.num_heads module parameter, stored in the qxl_num_crtc variable.
Lets get rid of the indirection and use the variable qxl_num_crtc
directly. The kernel doesn't need to dereference pointers each time it
needs the value, and when reading the code you don't have to trace where
and why qdev->monitors_config->max_allowed is set.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-16-kraxel@redhat.com
The qxl device supports only a single active framebuffer ("primary
surface" in spice terminology). In multihead configurations are handled
by defining rectangles within the primary surface for each head/crtc.
Userspace which uses the qxl ioctl interface (xorg qxl driver) is aware
of this limitation and will setup framebuffers and crtcs accordingly.
Userspace which uses dumb framebuffers (xorg modesetting driver,
wayland) is not aware of this limitation and tries to use two
framebuffers (one for each crtc) instead.
The qxl kms driver already has the dumb bo separated from the primary
surface, by using a (shared) shadow bo as primary surface. This is
needed to support pageflips without having to re-create the primary
surface. The qxl driver will blit from the dumb bo to the shadow bo
instead.
So we can extend the shadow logic: Maintain a global shadow bo (aka
primary surface), make it big enough that dumb bo's for all crtcs fit in
side-by-side. Adjust the pageflip blits to place the heads next to each
other in the shadow.
With this patch in place multihead qxl works with wayland.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-15-kraxel@redhat.com
Pass the shadow bo to qxl_io_create_primary() instead of expecting
qxl_io_create_primary to check bo->shadow. Set is_primary flag on the
shadow bo. Move the is_primary tracking into qxl_io_create_primary()
and qxl_io_destroy_primary() functions.
That simplifies primary surface tracking and the workflow in
qxl_primary_atomic_update().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-14-kraxel@redhat.com
qxl_io_create/destroy_primary: primary_bo tracking [fixup]
Track which bo is used as primary surface. With that in place we don't
need the primary_created flag any more, we can just check the primary bo
pointer instead.
Also verify we don't already have a primary surface in
qxl_io_create_primary().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-13-kraxel@redhat.com
The qxl device ties the cursor to the primary surface. Therefore
calling qxl_io_destroy_primary() and qxl_io_create_primary() to switch
the framebuffer causes the cursor information being lost and the driver
must re-apply it.
The correct call order to do that is qxl_io_destroy_primary() +
qxl_io_create_primary() + qxl_primary_apply_cursor().
The old code did qxl_io_destroy_primary() + qxl_primary_apply_cursor() +
qxl_io_create_primary(). Due to qxl_primary_apply_cursor request being
queued in a ringbuffer and qxl_io_create_primary() trapping to the
hypervisor instantly there is a high chance that qxl_io_create_primary()
is processed first even with the wrong call order. But it's racy and
thus not reliable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-11-kraxel@redhat.com
dumb buffers are used as qxl surfaces, so allocate them as
QXL_GEM_DOMAIN_SURFACE. Should usually be allocated in
PRIV ttm domain then, so this reduces VRAM memory pressure.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-10-kraxel@redhat.com
The shadow bo is used as qxl surface, so allocate it as
QXL_GEM_DOMAIN_SURFACE. Should usually be allocated in
PRIV ttm domain then, so this reduces VRAM memory pressure.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-9-kraxel@redhat.com
qxl surfaces (used for framebuffers and gem objects) can live in both
VRAM and PRIV ttm domains. Update placement setup to include both.
Put PRIV first in the list so it is preferred, so VRAM will have more
room for objects which must be allocated there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-8-kraxel@redhat.com
Without that ttm offsets are not unique, they can refer to objects
in both VRAM and PRIV memory (aka main and surfaces slot).
One of those "why things didn't blow up without this" moments.
Probably offset conflicts are rare enough by pure luck.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-7-kraxel@redhat.com
Instead of relaying on surface type use the actual placement.
This allow to have different placement for a single type of
surface.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-5-kraxel@redhat.com
[ kraxel: rebased, adapted to upstream changes ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
