The Microsemi Ocelot has multiple SerDes and requires that the SerDes be
muxed accordingly to the hardware representation.
Let's add a constant for each SerDes available in the Microsemi Ocelot.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Microsemi Ocelot has a set of register for SerDes/switch port muxing
as well as PCIe muxing for a specific SerDes, so let's add the device
and all SerDes in the Device Tree.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for upcoming phys that'll handle QSGMII or PCIe.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since HSIO address space can be accessed by different drivers, let's
simplify the register address definitions so that it can be easily used
by all drivers and put the register address definition in the
include/soc/mscc/ocelot_hsio.h header file.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since HSIO address space can be used by different drivers (PLL, SerDes
muxing, temperature sensor), let's move it somewhere it can be included
by all drivers.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HSIO address space was moved to a syscon, hence we need to get the
regmap of this address space from there and no more from the device
node.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HSIO register address space should be handled outside of the MAC
controller as there are some registers for PLL5 configuring,
SerDes/switch port muxing and a thermal sensor IP, so let's remove it.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HSIO contains registers for PLL5 configuration, SerDes/switch port
muxing and a thermal sensor, hence we can't keep it in the switch DT
node.
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
move_addr_to_kernel() returns only negative values on error, or zero on
success. Rewrite the error check to an idiomatic form to avoid confusing
the reader.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ns_poll() used spin_is_locked() + spin_lock() to get achieve the same
thing as a spin_trylock(), so simplify it by using that instead. This is
also a step towards possibly removing spin_is_locked().
Signed-off-by: Lance Roy <ldr709@gmail.com>
Cc: Chas Williams <3chas3@gmail.com>
Cc: <linux-atm-general@lists.sourceforge.net>
Cc: <netdev@vger.kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta says:
====================
Fixes, minor changes & cleanups for the Unicast MAC VLAN table
This patch-set presents necessary modifications, fixes & cleanups related
to Unicast MAC Vlan Table to support revision 0x21 hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In revision 0x20, we use vlan id != 0 to check whether a vlan tag
has been offloaded, so vlan id 0 is not supported.
In revision 0x21, rx buffer descriptor adds two bits to indicate
whether one or more vlan tags have been offloaded, so vlan id 0
is valid now.
This patch seperates the handle for vlan id 0, add vlan id 0 support
for revision 0x21.
Fixes: 5b5455a9ed ("net: hns3: Add STRP_TAGP field support for hardware revision 0x21")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In revision 0x21, hw supports both ingress and egress vlan filter.
This patch adds support for it.
Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For mta table support has been dropped, remove the code for mta table.
Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In previously implement for unicast mac vlan table, the space is
shared by all the functions, driver does nothing when the space is
exhausted. This patch preallocates the space of unicast mac vlan
table for each function by software. Each function can only use its
private space and available shared space, avoiding single function
exhausts too much space, and other functions are unable to add
unicast mac address.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In original codes, the mac vlan table entries are not cleared when
unload hns3 driver. The dirty mac vlan table entries will make the
result of looking up mac vlan table being unexpected.
When doing core reset or global reset, the firmware will clear all
the tables for driver, and driver shouldn't send any commands to
firmware during reset. But when doing function reset, the driver
needs to clear the tables itself.
This patch clears the mac vlan table entries for each client when
unload driver or reset.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The default mask configuration has been done by firmware, so the driver
doesn't need to do it any more.
Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ipv4 and ipv6 test cases with an invalid metrics option causing
ip_metrics_convert to fail. Tests clean up path during route add.
Also, add nodad to to ipv6 address add. When running ipv6_route_metrics
directly seeing an occasional failure on the "Using route with mtu metric"
test case.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case ip_fib_metrics_init() returns an error, we better
rewrite rt->fib6_metrics with &dst_default_metrics so that
we do not crash later in ip_fib_metrics_put()
Fixes: 767a221753 ("net: common metrics init helper for FIB entries")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid the socket lookup cost in udp_gro_receive if no socket has a
udp tunnel callback configured.
udp_sk(sk)->gro_receive requires a registration with
setup_udp_tunnel_sock, which enables the static key.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the
" --v-- fall through --v-- " comment with a proper
"fall through", which is what GCC is expecting to find.
Addresses-Coverity-ID: 1364476 ("Missing break in switch")
Addresses-Coverity-ID: 1364477 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
when 32 bit port capability is in use, use FW_PORT_ACTION_L1_CFG32
rather than FW_PORT_ACTION_L1_CFG.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit ec3ed293e7 ("net_sched: change tcf_del_walker() to take idrinfo->lock")
we move fl_hw_destroy_tmplt() to a workqueue to avoid blocking
with the spinlock held. Unfortunately, this causes a lot of
troubles here:
1. tcf_chain_destroy() could be called right after we queue the work
but before the work runs. This is a use-after-free.
2. The chain refcnt is already 0, we can't even just hold it again.
We can check refcnt==1 but it is ugly.
3. The chain with refcnt 0 is still visible in its block, which means
it could be still found and used!
4. The block has a refcnt too, we can't hold it without introducing a
proper API either.
We can make it working but the end result is ugly. Instead of wasting
time on reviewing it, let's just convert the troubling spinlock to
a mutex, which allows us to use non-atomic allocations too.
Fixes: ec3ed293e7 ("net_sched: change tcf_del_walker() to take idrinfo->lock")
Reported-by: Ido Schimmel <idosch@idosch.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the attribute parsing from neigh_dump_table to neigh_dump_info, and
pass the filter arguments down to neigh_dump_table in a new struct. Add
the filter option to proxy neigh dumps as well to make them consistent.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern says:
====================
net: Consolidate metrics handling for ipv4 and ipv6
As part of the IPv6 fib info refactoring, the intent was to make metrics
handling for ipv6 identical to ipv4. One oversight in ip6_dst_destroy
led to confusion and a couple of incomplete attempts at finding and
fixing the resulting memory leak which was ultimately resolved by
ce7ea4af08 ("ipv6: fix memory leak on dst->_metrics").
Refactor metrics hanlding make the code really identical for v4 and v6,
and add a few test cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ipv4 and ipv6 test cases for metrics (mtu) when fib entries are
created. Can be used with kmemleak to see leaks with both fib entries
and dst_entry.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the refcounting and potential free of dst metrics associated
for ipv4 and ipv6 to a common helper.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4 and ipv6 both use refcounted metrics if FIB entries have metrics set.
Move the common initialization code to a helper and use for both protocols.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the refcounting and potential free of dst metrics associated
with a fib entry to a helper and use it in both ipv4 and ipv6.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidate initialization of ipv4 and ipv6 metrics when fib entries
are created into a single helper, ip_fib_metrics_init, that handles
the call to ip_metrics_convert.
If no metrics are defined for the fib entry, then the metrics is set
to dst_default_metrics.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcf_block_dev() doesn't seem to be used anywhere in the tree.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Michal remaind, we should allow to clear ttl inherit. Then we will
have three states:
1. set the flag, and do ttl inherit.
2. do not set the flag, use configured ttl value, or default ttl (0) if
not set.
3. disable ttl inherit, use previous configured ttl value, or default ttl (0).
Fixes: 52d0d404d3 ("geneve: add ttl inherit support")
CC: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam says:
====================
bnxt_en: devlink param updates
This patchset adds support for 3 generic and 1 driver-specific devlink
parameters. Add documentation for these configuration parameters.
Also, this patchset adds support to return proper error code if
HWRM_NVM_GET/SET_VARIABLE commands return error code
HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED.
v3->v4:
-Remove extra definition of NVM_OFF_HW_TC_OFFLOAD from bnxt_devlink.h
-Remove type information for generic parameters from
devlink-params-bnxt.txt
v2->v3:
-Remove description of generic parameters from devlink-params-bnxt.txt
v1->v2:
-Remove hw_tc_offload parameter.
-Update all patches with Cc of MAINTAINERS.
-Add more description in commit message for device specific parameter.
-Add a new Documentation/networking/devlink-params.txt with some
generic devlink parameters information.
-Add a new Documentation/networking/devlink-params-bnxt.txt with devlink
parameters information that are supported by bnxt_en driver.
====================
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new file to add information about configuration
parameters that are supported by bnxt_en driver via devlink.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new file to add information about some of the
generic configuration parameters set via devlink.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds following driver-specific permanent mode boolean
parameter.
gre_ver_check - Generic Routing Encapsulation(GRE) version check
will be enabled in the device. If disabled, device skips version
checking for GRE packets.
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for following generic permanent mode
devlink parameters. They can be modified using devlink param
commands.
msix_vec_per_pf_max - This param sets the number of MSIX vectors
that the device requests from the host on driver initialization.
This value is set in the device which limits MSIX vectors per PF.
msix_vec_per_pf_min - This param sets the number of minimal MSIX
vectors required for the device initialization. Value 0 indicates
a default value is selected. This value is set in the device which
limits MSIX vectors per PF.
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return proper error code when Firmware returns
HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED for HWRM_NVM_GET/SET_VARIABLE
commands.
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for ignore_ari generic permanent mode
devlink parameter. This parameter is disabled by default. It can be
enabled using devlink param commands.
ignore_ari - If enabled, device ignores ARI(Alternate Routing ID)
capability, even when platforms has the support and creates same number
of partitions when platform does not support ARI capability.
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
msix_vec_per_pf_min - This param sets the number of minimal MSIX
vectors required for the device initialization. This value is set
in the device which limits MSIX vectors per PF.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
msix_vec_per_pf_max - This param sets the number of MSIX vectors
that the device requests from the host on driver initialization.
This value is set in the device which is applicable per PF.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ignore_ari - Device ignores ARI(Alternate Routing ID) capability,
even when platforms has the support and creates same number of
partitions when platform does not support ARI capability.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang warns when one enumerated type is implicitly converted to another.
drivers/net/ethernet/qlogic/qed/qed_ll2.c:799:32: warning: implicit
conversion from enumeration type 'enum core_tx_dest' to different
enumeration type 'enum qed_ll2_tx_dest' [-Wenum-conversion]
tx_pkt.tx_dest = p_ll2_conn->tx_dest;
~ ~~~~~~~~~~~~^~~~~~~
1 warning generated.
Fix this by using a switch statement to convert between the enumerated
values since they are not 1 to 1, which matches how the rest of the
driver handles this conversion.
Link: https://github.com/ClangBuiltLinux/linux/issues/125
Suggested-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5 core driver and ethernet netdev updates, please note there is a small
devlink releated update to allow extack argument to eswitch operations.
From Eli Britstein,
1) devlink: Add extack argument to the eswitch related operations
2) net/mlx5e: E-Switch, return extack messages for failures in the e-switch devlink callbacks
3) net/mlx5e: Add extack messages for TC offload failures
From Eran Ben Elisha,
4) mlx5e: Add counter for aRFS rule insertion failures
From Feras Daoud
5) Fast teardown support for mlx5 device
This change introduces the enhanced version of the "Force teardown" that
allows SW to perform teardown in a faster way without the need to reclaim
all the FW pages.
Fast teardown provides the following advantages:
1- Fix a FW race condition that could cause command timeout
2- Avoid moving to polling mode
3- Close the vport to prevent PCI ACK to be sent without been scatter
to memory
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbtU45AAoJEEg/ir3gV/o+/C4H/RHA4KImrb476EdB3VNYMqAN
dgXb+bmh6sZP+jHWqQ4c3aVeh6/T8qm4gwiSn2nVTtHEnxtCdIYljzDC1Nswczeg
pSjD1eOP7M1LpAOmBb8xdnJcX7yM7r1bTklnp2sN853WShbsDRYgZBHsBwTzx25U
ZdzL4QTLuohlG/aLrbGXMntIy45ya2fVQrnK54s18nFlgsdFjEs0mi0xaUKNBC6+
P8CTohHAxuuxmL5b+6MIYLZCdgd8cLNQFdtqbckEVw7SvcRTxfraRlyqJ0YOgTGB
TdSWnqZz2JYH29wSFbpFG8qX6GCv8FoiZ+fKzldbolHk442rrktHv3+Y7qQuZVs=
=NVks
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2018-10-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2018-10-03
mlx5 core driver and ethernet netdev updates, please note there is a small
devlink releated update to allow extack argument to eswitch operations.
From Eli Britstein,
1) devlink: Add extack argument to the eswitch related operations
2) net/mlx5e: E-Switch, return extack messages for failures in the e-switch devlink callbacks
3) net/mlx5e: Add extack messages for TC offload failures
From Eran Ben Elisha,
4) mlx5e: Add counter for aRFS rule insertion failures
From Feras Daoud
5) Fast teardown support for mlx5 device
This change introduces the enhanced version of the "Force teardown" that
allows SW to perform teardown in a faster way without the need to reclaim
all the FW pages.
Fast teardown provides the following advantages:
1- Fix a FW race condition that could cause command timeout
2- Avoid moving to polling mode
3- Close the vport to prevent PCI ACK to be sent without been scatter
to memory
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=b6yx
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-next-20181004' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Development
Here are some development patches for AF_RXRPC. The most significant points
are:
(1) Change the tracepoint that indicates a packet has been transmitted
into one that indicates a packet is about to be transmitted. Without
this, the response tracepoint may occur first if the round trip is
fast enough.
(2) Sort out AFS address list handling to better enforce maximum capacity
to use helper functions to fill them and to do an insertion sort to
order them. This is here to make (3) easier.
(3) Keep AF_INET addresses as AF_INET addresses rather than converting
them to AF_INET6 in both AF_RXRPC and kAFS. I hadn't realised that a
UDP6 socket would just call down into UDP4 if given an AF_INET
address.
(4) Allow the timestamp on the first DATA packet of a reply to be
retrieved by a kernel service. This will give the kAFS a more
accurate base from which to calculate the callback promise expiration.
(5) Allow the rxrpc protocol epoch value to be retrieved from an incoming
call. This will allow kAFS to determine if the fileserver restarted
and if two addresses apparently assigned to the same fileserver
actually are different boxes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the DNS resolver to retrieve a set of servers and their associated
addresses, ports, preference and weight ratings.
In terms of communication with userspace, "srv=1" is added to the callout
string (the '1' indicating the maximum data version supported by the
kernel) to ask the userspace side for this.
If the userspace side doesn't recognise it, it will ignore the option and
return the usual text address list.
If the userspace side does recognise it, it will return some binary data
that begins with a zero byte that would cause the string parsers to give an
error. The second byte contains the version of the data in the blob (this
may be between 1 and the version specified in the callout data). The
remainder of the payload is version-specific.
In version 1, the payload looks like (note that this is packed):
u8 Non-string marker (ie. 0)
u8 Content (0 => Server list)
u8 Version (ie. 1)
u8 Source (eg. DNS_RECORD_FROM_DNS_SRV)
u8 Status (eg. DNS_LOOKUP_GOOD)
u8 Number of servers
foreach-server {
u16 Name length (LE)
u16 Priority (as per SRV record) (LE)
u16 Weight (as per SRV record) (LE)
u16 Port (LE)
u8 Source (eg. DNS_RECORD_FROM_NSS)
u8 Status (eg. DNS_LOOKUP_GOT_NOT_FOUND)
u8 Protocol (eg. DNS_SERVER_PROTOCOL_UDP)
u8 Number of addresses
char[] Name (not NUL-terminated)
foreach-address {
u8 Family (AF_INET{,6})
union {
u8[4] ipv4_addr
u8[16] ipv6_addr
}
}
}
This can then be used to fetch a whole cell's VL-server configuration for
AFS, for example.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial fix to spelling mistakes in dev_dbg warning messages
"Reloade" -> "Reload"
"chang" -> "change"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2018-10-04
An update from ieee802154 for *net-next*
A very quite cycle in the ieee802154 subsystem. We only have two cleanup
patches for this pull request.
Xue removed the platform_data struct handling from the mcr20a driver and
Alexander cleaned up some left overs in the hwsim driver.
Please pull, or let me know if there are any problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
