The device is able to send multiple Tx confirmations in the one reply.
In this case, there is only one vif identifier for all the
confirmations.
Unfortunately, to generate this kind of messages the device squashes all
the confirmations whatever their vif ID and use the vif ID of the first
confirmation. So, the driver cannot rely on the vif ID mentioned in the
header. Fortunately, using the packet_id, the driver can retrieve the Tx
request and the associated vif.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the driver has sent a frame on a virtual interface (vif), it
expects to receive the confirmation on the same vif.
This patch add a check for that.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device handles 4 queues (one per AC) for each virtual interface (and
maximum 4 virtual interfaces). Until now the driver unified the queue of
all interfaces and handled only 4 queues for whole device.
This architecture did not allow to balance the traffic between the vif. So,
this patch relocate the queues into the vif and change the API accordingly.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many defined constants in wifi.h are unused and/or available from
<linux/ieee80211.h>, some with slightly different names. Use the
common ones, rename where necessary and remove unused.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200701164213.4205-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many defined constants in wifi.h are unused and/or available from
<linux/ieee80211.h>, some with slightly different names. Use the
common ones, rename where necessary and remove unused.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200701182957.7932-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The movement of wilc1000 out of staging left an obsolete TODO file.
Remove that as it's no longer needed.
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: <Ajay.Kathat@microchip.com>
Cc: <Venkateswara.Kaja@microchip.com>
Cc: <Sripad.Balwadgi@microchip.com>
Cc: <Nicolas.Ferre@microchip.com>
Cc: <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the movement of the wilc1000 driver out of staging, pulled in
here so that we do not end up doing duplicate work.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* 'wilc1000-move-out-of-staging' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next:
wilc1000: move wilc driver out of staging
Use %s and __func__ in place of function names.
This solves following checkpatch.pl warning
WARNING: Prefer using '"%s...", __func__' to using 'rtw_do_join', this function's name, in a string
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20200701145457.9562-1-puranjay12@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a WARNING of Block comments use * on subsequent lines.
Signed-off-by: Simon Fong <simon.fodin@gmail.com>
Link: https://lore.kernel.org/r/20200630022228.GA580@simon-pc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To make the separation clear between vchiq's header files and vchiq.h,
which is to be used by services and is the 'public' API, move it into a
dedicated includes directory.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-48-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Those are only used in the core vchiq code, while present in vchiq's
'public' API header. Move them into the right place.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-47-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This used to be vchiq_if.h but vchiq.h is more concise for an include
file that will hopefully be in the future in the includes directory.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-46-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The barrier is only used by core code. So keep the barrier definition in
the core header.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-45-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the functions that vchi currently provides are a 1:1 mapping to its
vchiq counterparts. Get rid of vchi altogether and use vchiq's on all
services.
In the process also get rid of the vchi directory, as the only remaining
file was a TODO file, which now lives in the parent directory.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-44-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can't really merge it with vchiq_queue_message() as it has internal
users that will not benefit from the retry mechanism
vchiq_queue_kernel_message() uses. So, for the sake of getting rid of
vchi, move it into vchiq.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-43-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Its vchiq counterpart, vchiq_bulk_transmit() is only used by vchi. We
can then merge both functions by moving vchi_bulk_queue_transmit()'s
retry mechanism into vchiq_bulk_transmit() and let services call the
later.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-42-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Its vchiq counterpart, vchiq_bulk_receive() is only used by vchi. We can
then merge both functions by moving vchi_bulk_queue_receive()'s retry
mechanism into vchiq_bulk_receive() and let services call the later.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-41-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchiq_if.h is used by service consumers and only the exported API should
be present. Move the rest of definitions, which were not exported by the
way, to vchiq_core.h where they belong.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-40-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function is being exported although there is no use for it outside
of vchiq's core code. Keep it local then.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-39-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is already enough duplication with regard to fourcc generation in
the kernel. Let's at least use the same macro all over the vchiq
ecosystem.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-35-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The services have access to struct vchiq_header's internals, so we can
let them get the data pointer. This pretty much makes both functions
exactly the same, which will allow us to make a switch to
vchiq_msg_hold() further down the road.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-34-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchi created an opaque structure to be held by services while they
process callback messages. The contents of this opaque structure are the
service handle, which all services already maintain, and a pointer to
vchiq's message structure, struct vchiq_header.
Let's get rid of this opaque structure and directly pass struct
vchiq_header, which is what ultimately vchiq consumes when handling
callback messages.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-33-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structure only contains a single parameter, which is the underlying
vchiq handle. Get rid of the struct and directly pass the handle around.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-32-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For initialization, vchi has its own params structure, which is then
translated to vchiq's params structure. They are essentially the same,
so lets directly use vchiq's.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-31-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As vchiq_shim's callback does nothing aside from pushing messages into
the service's queue, let's bypass it and jump directly to the service's
callbacks, letting them choose whether to use the message queue.
It turns out most services don't need to use the message queue, which
makes for simpler code in the end.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-29-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchiq consumer drivers may need to use this function in order to get the
benefits of vchiq's per service message queueing mechanism.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-28-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The header file only provides other includes. Move the relevant includes
to their respective C files and delete it for good.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-25-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This has historically been handled by vchi, but there is no reason why
this couldn't be handled directly in vchiq.
The patch tries to avoid altering any behavior, with the exception of
the msg_queue size, which is now fixed to VCHIQ_MAX_SLOTS (it was set to
VCHIQ_MAX_SLOTS / 2). This is done to match vchiq's user_service message
queue, which could be merged with this one in the future.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-24-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When adding a new service validate the configuration parameters
provided, and remove unnecessary checks in vchi, now that we have
validated service's config.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-23-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was probably there to trick compilers into ignoring unused variables,
which isn't needed in Linux.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-22-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
enum vchi_callback_reason maps 1:1 to enum vchiq_reason, in an effort to
simplify things, let's use the later, and get rid of the extra
indirection.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-21-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchi has a set of transfer flags which almost map 1:1 to vchiq's own
transfer modes. For the sake of simplicity let's use the later and
delete vchi's.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-20-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All users are ignoring the flags argument. So for the sake of
simplicity delete it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-19-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
