Intel VT-d might support PRS (Page Reqest Support) when it's
running in the scalable mode. Each page request descriptor
occupies 32 bytes and is 32-bytes aligned. The page request
descriptor offset mask should be 32-bytes aligned.
Fixes: 5b438f4ba3 ("iommu/vt-d: Support page request in scalable mode")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Arm SMMUv3.2 adds support for TLB range invalidate operations.
Support for range invalidate is determined by the RIL bit in the IDR3
register.
The range invalidate is in units of the leaf page size and operates on
1-32 chunks of a power of 2 multiple pages. First, we determine from the
size what power of 2 multiple we can use. Then we calculate how many
chunks (1-31) of the power of 2 size for the range on the iteration. On
each iteration, we move up in size by at least 5 bits.
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Similar to commit 2af2e72b18 ("iommu/arm-smmu-v3: Defer TLB
invalidation until ->iotlb_sync()"), build up a list of ATC invalidation
commands and submit them all at once to the command queue instead of
one-by-one.
As there is only one caller of arm_smmu_atc_inv_master() left, we can
simplify it and avoid passing in struct arm_smmu_cmdq_ent.
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Rather than publishing one command at a time when invalidating a context
descriptor, batch the commands for all SIDs in the domain.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
As more functions will implement command queue batching, add two helpers
to simplify building a command list.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Use WRITE_ONCE() to make sure that the SMMU doesn't read incomplete
stream table descriptors. Refer to the comment about 64-bit accesses,
and add the comment to the equivalent context descriptor code.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Enable PASID for PCI devices that support it. Initialize PASID early in
add_device() because it must be enabled before ATS.
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel)
gets populated only when DMA remapping is enabled (dmar_disabled = 0)
irrespective of whether interrupt remapping is enabled or not.
Instead, populate the intel iommu debugfs directory if any IOMMUs are
detected.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: ee2636b867 ("iommu/vt-d: Enable base Intel IOMMU debugfs support")
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit b9c6ff94e4 ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") accidentally left out the ir_data pointer when
calling modity_irte_ga(), which causes the function amd_iommu_update_ga()
to return prematurely due to struct amd_ir_data.ref is NULL and
the "is_run" bit of IRTE does not get updated properly.
This results in bad I/O performance since IOMMU AVIC always generate GA Log
entry and notify IOMMU driver and KVM when it receives interrupt from the
PCI pass-through device instead of directly inject interrupt to the vCPU.
Fixes by passing ir_data when calling modify_irte_ga() as done previously.
Fixes: b9c6ff94e4 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
VMD subdevices are created with a PCI domain ID of 0x10000 or
higher.
These subdevices are also handled like all other PCI devices by
dmar_pci_bus_notifier().
However, when dmar_alloc_pci_notify_info() take records of such devices,
it will truncate the domain ID to a u16 value (in info->seg).
The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if
it is 0000:00:02.0.
In the unlucky event that a real device also exists at 0000:00:02.0 and
also has a device-specific entry in the DMAR table,
dmar_insert_dev_scope() will crash on:
BUG_ON(i >= devices_cnt);
That's basically a sanity check that only one PCI device matches a
single DMAR entry; in this case we seem to have two matching devices.
Fix this by ignoring devices that have a domain number higher than
what can be looked up in the DMAR table.
This problem was carefully diagnosed by Jian-Hong Pan.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Fixes: 59ce0515cd ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When base address in RHSA structure doesn't match base address in
each DRHD structure, the base address in last DRHD is printed out.
This doesn't make sense when there are multiple DRHD units, fix it
by printing the buggy RHSA's base address.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Fixes: fd0c889489 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 6825d3ea6c ("iommu/vt-d: Add debugfs support to show register
contents") dumps the register contents for all IOMMU devices.
Currently, a 64 bit read(dmar_readq) is done for all the IOMMU registers,
even though some of the registers are 32 bits, which is incorrect.
Use the correct read function variant (dmar_readl/dmar_readq) while
reading the contents of 32/64 bit registers respectively.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Link: https://lore.kernel.org/r/1583784587-26126-2-git-send-email-megha.dey@linux.intel.com
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:
* WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
* significant kernel issues that need prompt attention if they should ever
* appear at runtime.
*
* Do not use these macros when checking for invalid external inputs
The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.
Fixes: 556ab45f9a ("ioat2: catch and recover from broken vtd configurations v6")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200309182510.373875-1-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=701847
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:
* WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
* significant kernel issues that need prompt attention if they should ever
* appear at runtime.
*
* Do not use these macros when checking for invalid external inputs
The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.
Some distros, e.g. Fedora, have tools watching for the kernel backtraces
logged by the WARN macros and offer the user an option to file a bug for
this when these are encountered. The WARN_TAINT in dmar_parse_one_rmrr
+ another iommu WARN_TAINT, addressed in another patch, have lead to over
a 100 bugs being filed this way.
This commit replaces the WARN_TAINT("...") call, with a
pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) call
avoiding the backtrace and thus also avoiding bug-reports being filed
about this against the kernel.
Fixes: f5a68bb075 ("iommu/vt-d: Mark firmware tainted if RMRR fails sanity check")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/r/20200309140138.3753-3-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1808874
Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:
* WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
* significant kernel issues that need prompt attention if they should ever
* appear at runtime.
*
* Do not use these macros when checking for invalid external inputs
The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.
Some distros, e.g. Fedora, have tools watching for the kernel backtraces
logged by the WARN macros and offer the user an option to file a bug for
this when these are encountered. The WARN_TAINT in warn_invalid_dmar()
+ another iommu WARN_TAINT, addressed in another patch, have lead to over
a 100 bugs being filed this way.
This commit replaces the WARN_TAINT("...") calls, with
pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) calls
avoiding the backtrace and thus also avoiding bug-reports being filed
about this against the kernel.
Fixes: fd0c889489 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables")
Fixes: e625b4a95d ("iommu/vt-d: Parse ANDD records")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200309140138.3753-2-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1564895
Similar to the commit 02d715b4a8 ("iommu/vt-d: Fix RCU list debugging
warnings"), there are several other places that call
list_for_each_entry_rcu() outside of an RCU read side critical section
but with dmar_global_lock held. Silence those false positives as well.
drivers/iommu/intel-iommu.c:4288 RCU-list traversed in non-reader section!!
1 lock held by swapper/0/1:
#0: ffffffff935892c8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1ad/0xb97
drivers/iommu/dmar.c:366 RCU-list traversed in non-reader section!!
1 lock held by swapper/0/1:
#0: ffffffff935892c8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x125/0xb97
drivers/iommu/intel-iommu.c:5057 RCU-list traversed in non-reader section!!
1 lock held by swapper/0/1:
#0: ffffffffa71892c8 (dmar_global_lock){++++}, at: intel_iommu_init+0x61a/0xb13
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are several places traverse RCU-list without holding any lock in
intel_iommu_init(). Fix them by acquiring dmar_global_lock.
WARNING: suspicious RCU usage
-----------------------------
drivers/iommu/intel-iommu.c:5216 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/1.
Call Trace:
dump_stack+0xa0/0xea
lockdep_rcu_suspicious+0x102/0x10b
intel_iommu_init+0x947/0xb13
pci_iommu_init+0x26/0x62
do_one_initcall+0xfe/0x500
kernel_init_freeable+0x45a/0x4f8
kernel_init+0x11/0x139
ret_from_fork+0x3a/0x50
DMAR: Intel(R) Virtualization Technology for Directed I/O
Fixes: d8190dc638 ("iommu/vt-d: Enable DMA remapping after rmrr mapped")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The way cookie_init_hw_msi_region() allocates the iommu_dma_msi_page
structures doesn't match the way iommu_put_dma_cookie() frees them.
The former performs a single allocation of all the required structures,
while the latter tries to free them one at a time. It doesn't quite
work for the main use case (the GICv3 ITS where the range is 64kB)
when the base granule size is 4kB.
This leads to a nice slab corruption on teardown, which is easily
observable by simply creating a VF on a SRIOV-capable device, and
tearing it down immediately (no need to even make use of it).
Fortunately, this only affects systems where the ITS isn't translated
by the SMMU, which are both rare and non-standard.
Fix it by allocating iommu_dma_msi_page structures one at a time.
Fixes: 7c1b058c8b ("iommu/dma: Handle IOMMU API reserved regions")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some of the IOMMU drivers can be compile tested to increase build
coverage. The OMAP, Rockchip and Exynos drivers use
device.dev_archdata.iommu field which does not exist on all platforms.
The sPAPR TCE and ARM SMMU have also restrictions where they can be
built.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Although the OMAP IOMMU driver supports only ARMv7 (32-bit) platforms,
it can be compile tested for other architectures, including 64-bit ones.
In such case the warning appears:
In file included from drivers/iommu/omap-iommu.c:33:0:
drivers/iommu/omap-iommu.c: In function 'omap_iommu_iova_to_phys':
>> drivers/iommu/omap-iopgtable.h:44:21: warning: large integer implicitly truncated to unsigned type [-Woverflow]
#define IOPTE_MASK (~(IOPTE_SIZE - 1))
^
>> drivers/iommu/omap-iommu.c:1641:41: note: in expansion of macro 'IOPTE_MASK'
ret = omap_iommu_translate(*pte, da, IOPTE_MASK);
^~~~~~~~~~
Fix this by using architecture-depending types in omap_iommu_translate():
1. Pointer should be cast to unsigned long,
2. Virtual addresses should be cast to dma_addr_t.
On 32-bit this will be the same as original code (using u32). On 64-bit
it should produce meaningful result, although it does not really matter.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Print size_t as %zu or %zx to fix -Wformat warnings when compiling on
64-bit platform (e.g. with COMPILE_TEST):
drivers/iommu/omap-iommu.c: In function ‘flush_iotlb_page’:
drivers/iommu/omap-iommu.c:437:47: warning:
format ‘%x’ expects argument of type ‘unsigned int’,
but argument 7 has type ‘size_t {aka long unsigned int}’ [-Wformat=]
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
pointers should be casted to unsigned long to avoid
-Wpointer-to-int-cast warnings when compiling on 64-bit platform (e.g.
with COMPILE_TEST):
drivers/iommu/omap-iommu.c: In function ‘omap2_iommu_enable’:
drivers/iommu/omap-iommu.c:170:25: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K))
^
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we ony support the TTB1 quirk for AArch64 contexts, and
consequently only for 64-bit builds, the sign-extension aspect of the
"are all bits above IAS consistent?" check should implicitly only apply
to 64-bit IOVAs. Change the type of the cast to ensure that 32-bit longs
don't inadvertently get sign-extended, and thus considered invalid, if
they happen to be above 2GB in the TTB0 region.
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Acked-by: Will Deacon <will@kernel.org>
Fixes: db6903010a ("iommu/io-pgtable-arm: Prepare for TTBR1 usage")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
intel_iommu_iova_to_phys() has a bug when it translates an IOVA for a huge
page onto its corresponding physical address. This commit fixes the bug by
accomodating the level of page entry for the IOVA and adds IOVA's lower
address to the physical address.
Cc: <stable@vger.kernel.org>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Yonghyun Hwang <yonghyun@google.com>
Fixes: 3871794642 ("VT-d: Changes to support KVM")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Although the 1-element array was a typical pre-C99 way to implement
variable-length structures, and indeed is a fundamental construct in the
APIs of certain other popular platforms, there's no good reason for it
here (and in particular the sizeof() trick is far too "clever" for its
own good). We can just as easily implement iommu_fwspec's preallocation
behaviour using a standard flexible array member, so let's make it look
the way most readers would expect.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the infrastructure changes are in place, enable virtio-iommu to
be built as a module. Remove the redundant pci_request_acs() call, since
it's not exported but is already invoked during DMA setup.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However,
this requires 21 bits (Please see the AMD IOMMU specification).
This leads to the potential failure when the bit 51 of SPA of
the GCR3 table root pointer is 1'.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Fixes: 52815b7568 ("iommu/amd: Add support for IOMMUv2 domain mode")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extending the Arm SMMU driver to allow for modular builds changed
KBUILD_MODNAME to be "arm_smmu_mod" so that a single module could be
built from the multiple existing object files without the need to rename
any source files.
This inadvertently changed the name of the driver parameters, which may
lead to runtime issues if bootloaders are relying on the old names for
correctness (e.g. "arm-smmu.disable_bypass=0").
Although MODULE_PARAM_PREFIX can be overridden to restore the old naming
for builtin parameters, only the new name is matched by modprobe and so
loading the driver as a module would cause parameters specified on the
kernel command line to be ignored. Instead, rename "arm_smmu_mod" to
"arm_smmu". Whilst it's a bit of a bodge, this allows us to create a
single module without renaming any files and makes use of the fact that
underscores and hyphens can be used interchangeably in parameter names.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Reported-by: Li Yang <leoyang.li@nxp.com>
Fixes: cd221bd24f ("iommu/arm-smmu: Allow building as a module")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the implementation of qcom_iommu_domain_free() is guaranteed
to do one of two things: WARN() and leak everything, or dereference NULL
and crash. That alone is terrible, but in fact the whole idea of trying
to track the liveness of a domain via the qcom_domain->iommu pointer as
a sanity check is full of fundamentally flawed assumptions. Make things
robust and actually functional by not trying to be quite so clever.
Reported-by: Brian Masney <masneyb@onstation.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 0ae349a0f3 ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Serious screen flickering when Stoney Ridge outputs to a 4K monitor.
Use identity-mapping and PCI ATS doesn't help this issue.
According to Alex Deucher, IOMMU isn't enabled on Windows, so let's do
the same here to avoid screen flickering on 4K monitor.
Cc: Alex Deucher <alexander.deucher@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/issues/961
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function only has one call-site and there it is never called with
dummy or deferred devices. Simplify the check in the function to
account for that.
Fixes: 1ee0186b9a ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function is now only a wrapper around find_domain(). Remove the
function and call find_domain() directly at the call-sites.
Fixes: 1ee0186b9a ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The attachment of deferred devices needs to happen before the check
whether the device is identity mapped or not. Otherwise the check will
return wrong results, cause warnings boot failures in kdump kernels, like
WARNING: CPU: 0 PID: 318 at ../drivers/iommu/intel-iommu.c:592 domain_get_iommu+0x61/0x70
[...]
Call Trace:
__intel_map_single+0x55/0x190
intel_alloc_coherent+0xac/0x110
dmam_alloc_attrs+0x50/0xa0
ahci_port_start+0xfb/0x1f0 [libahci]
ata_host_start.part.39+0x104/0x1e0 [libata]
With the earlier check the kdump boot succeeds and a crashdump is written.
Fixes: 1ee0186b9a ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the code that does the deferred device attachment into a separate
helper function.
Fixes: 1ee0186b9a ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement a helper function to check whether a device's attach process
is deferred.
Fixes: 1ee0186b9a ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Allow to compile the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba75) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=HMIT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Allow compiling the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba75) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various
drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
iommu/amd: Remove the unnecessary assignment
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
iommu/vt-d: Unnecessary to handle default identity domain
iommu/vt-d: Allow devices with RMRRs to use identity domain
iommu/vt-d: Add RMRR base and end addresses sanity check
iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
iommu/amd: Remove unused struct member
iommu/amd: Replace two consecutive readl calls with one readq
iommu/vt-d: Don't reject Host Bridge due to scope mismatch
PCI/ATS: Add PASID stubs
iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
iommu/arm-smmu-v3: Improve add_device() error handling
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
iommu/arm-smmu-v3: Add second level of context descriptor table
iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
iommu/arm-smmu-v3: Propagate ssid_bits
iommu/arm-smmu-v3: Add support for Substream IDs
iommu/arm-smmu-v3: Add context descriptor tables allocators
iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
ACPI/IORT: Parse SSID property of named component node
...
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
Remove the sanity check required for VMD child devices. The new
pci_real_dma_dev() DMA alias mechanism places them in the same IOMMU group
as the VMD endpoint. Assignment of the group would require assigning the
VMD endpoint, where unbinding the VMD endpoint removes the child device
domain from the hierarchy.
Link: https://lore.kernel.org/r/1579613871-301529-6-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
The PCI device may have a DMA requester on another bus, such as VMD
subdevices needing to use the VMD endpoint. This case requires the real
DMA device for the IOMMU mapping, so use pci_real_dma_dev() to find that
device.
Link: https://lore.kernel.org/r/1579613871-301529-5-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
The assignment of the global variable 'iommu_detected' has been
moved from amd_iommu_init_dma_ops() to amd_iommu_detect(), so
this patch removes the assignment in amd_iommu_init_dma_ops().
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Address field in device TLB invalidation descriptor is qualified
by the S field. If S field is zero, a single page at page address
specified by address [63:12] is requested to be invalidated. If S
field is set, the least significant bit in the address field with
value 0b (say bit N) indicates the invalidation address range. The
spec doesn't require the address [N - 1, 0] to be cleared, hence
remove the unnecessary WARN_ON_ONCE().
Otherwise, the caller might set "mask = MAX_AGAW_PFN_WIDTH" in order
to invalidating all the cached mappings on an endpoint, and below
overflow error will be triggered.
[...]
UBSAN: Undefined behaviour in drivers/iommu/dmar.c:1354:3
shift exponent 64 is too large for 64-bit type 'long long unsigned int'
[...]
Reported-and-tested-by: Frank <fgndev@posteo.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu default domain framework has been designed to take
care of setting identity default domain type. It's unnecessary
to handle this again in the VT-d driver. Hence, remove it.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit ea2447f700 ("intel-iommu: Prevent devices with
RMRRs from being placed into SI Domain"), the Intel IOMMU driver
doesn't allow any devices with RMRR locked to use the identity
domain. This was added to to fix the issue where the RMRR info
for devices being placed in and out of the identity domain gets
lost. This identity maps all RMRRs when setting up the identity
domain, so that devices with RMRRs could also use it.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The VT-d spec specifies requirements for the RMRR entries base and
end (called 'Limit' in the docs) addresses.
This commit will cause the DMAR processing to mark the firmware as
tainted if any RMRR entries that do not meet these requirements.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
RMRR entries describe memory regions that are DMA targets for devices
outside the kernel's control.
RMRR entries that fail the sanity check are pointing to regions of
memory that the firmware did not tell the kernel are reserved or
otherwise should not be used.
Instead of aborting DMAR processing, this commit marks the firmware
as tainted. These RMRRs will still be identity mapped, otherwise,
some devices, e.x. graphic devices, will not work during boot.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: f036c7fa0a ("iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
init_iommu_perf_ctr() clobbers the register when it checks write access
to IOMMU perf counters and fails to restore when they are writable.
Add save and restore to fix it.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fixes: 30861ddc9c ("perf/x86/amd: Add IOMMU Performance Counter resource management")
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is possible for archdata.iommu to be set to
DEFER_DEVICE_DOMAIN_INFO or DUMMY_DEVICE_DOMAIN_INFO so check for
those values before calling __dmar_remove_one_dev_info. Without a
check it can result in a null pointer dereference. This has been seen
while booting a kdump kernel on an HP dl380 gen9.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable@vger.kernel.org # 5.3+
Cc: linux-kernel@vger.kernel.org
Fixes: ae23bfb68f ("iommu/vt-d: Detach domain before using a private one")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit c805b428f2 ("iommu/amd: Remove amd_iommu_pd_list") removes
the global list for the allocated protection domains. The
corresponding member 'list' of the protection_domain struct is
not used anymore, so it can be removed.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Optimize the reigster reading by using readq instead of the two
consecutive readl calls.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On a system with two host bridges(0000:00:00.0,0000:80:00.0), iommu
initialization fails with
DMAR: Device scope type does not match for 0000:80:00.0
This is because the DMAR table reports this device as having scope 2
(ACPI_DMAR_SCOPE_TYPE_BRIDGE):
but the device has a type 0 PCI header:
80:00.0 Class 0600: Device 8086:2020 (rev 06)
00: 86 80 20 20 47 05 10 00 06 00 00 06 10 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 00
30: 00 00 00 00 90 00 00 00 00 00 00 00 00 01 00 00
VT-d works perfectly on this system, so there's no reason to bail out
on initialization due to this apparent scope mismatch. Add the class
0x06 ("PCI_BASE_CLASS_BRIDGE") as a heuristic for allowing DMAR
initialization for non-bridge PCI devices listed with scope bridge.
Signed-off-by: jimyan <jimyan@baidu.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Although we WARN in arm_smmu_add_device() if the device being added has
been added already without a subsequent call to arm_smmu_remove_device(),
we still continue half-heartedly, initialising the stream-table for any
new StreamIDs that may have magically appeared and re-establishing device
links that should still be there from last time.
Given that calling ->add_device() twice without removing the device in the
meantime is indicative of an error in the caller, just return -EBUSY after
warning.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Jean Philippe-Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Let add_device() clean up after itself. The iommu_bus_init() function
does call remove_device() on error, but other sites (e.g. of_iommu) do
not.
Don't free level-2 stream tables because we'd have to track if we
allocated each of them or if they are used by other endpoints. It's not
worth the hassle since they are managed resources.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
If, for some bizarre reason, the compiler decided to split up the write
of STE DWORD 0, we could end up making a partial structure valid.
Although this probably won't happen, follow the example of the
context-descriptor code and use WRITE_ONCE() to ensure atomicity of the
write.
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
The SMMU can support up to 20 bits of SSID. Add a second level of page
tables to accommodate this. Devices that support more than 1024 SSIDs now
have a table of 1024 L1 entries (8kB), pointing to tables of 1024 context
descriptors (64kB), allocated on demand.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Second-level context descriptor tables will be allocated lazily in
arm_smmu_write_ctx_desc(). Help with handling allocation failure by
moving the CD write into arm_smmu_domain_finalise_s1().
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
[will: Add comment per discussion on list]
Signed-off-by: Will Deacon <will@kernel.org>
Now that we support substream IDs, initialize s1cdmax with the number of
SSID bits supported by a master and the SMMU.
Context descriptor tables are allocated once for the first master
attached to a domain. Therefore attaching multiple devices with
different SSID sizes is tricky, and we currently don't support it.
As a future improvement it would be nice to at least support attaching a
SSID-capable device to a domain that isn't using SSID, by reallocating
the SSID table. This would allow supporting a SSID-capable device that
is in the same IOMMU group as a bridge, for example. Varying SSID size
is less of a concern, since the PCIe specification "highly recommends"
that devices supporting PASID implement all 20 bits of it.
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
At the moment, the SMMUv3 driver implements only one stage-1 or stage-2
page directory per device. However SMMUv3 allows more than one address
space for some devices, by providing multiple stage-1 page directories. In
addition to the Stream ID (SID), that identifies a device, we can now have
Substream IDs (SSID) identifying an address space. In PCIe, SID is called
Requester ID (RID) and SSID is called Process Address-Space ID (PASID).
A complete stage-1 walk goes through the context descriptor table:
Stream tables Ctx. Desc. tables Page tables
+--------+ ,------->+-------+ ,------->+-------+
: : | : : | : :
+--------+ | +-------+ | +-------+
SID->| STE |---' SSID->| CD |---' IOVA->| PTE |--> IPA
+--------+ +-------+ +-------+
: : : : : :
+--------+ +-------+ +-------+
Rewrite arm_smmu_write_ctx_desc() to modify context descriptor table
entries. To keep things simple we only implement one level of context
descriptor tables here, but as with stream and page tables, an SSID can
be split to index multiple levels of tables.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Support for SSID will require allocating context descriptor tables. Move
the context descriptor allocation to separate functions.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
When adding SSID support to the SMMUv3 driver, we'll need to manipulate
leaf pasid tables and context descriptors. Extract the context
descriptor structure and align with the way stream tables are handled.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
For platform devices that support SubstreamID (SSID), firmware provides
the number of supported SSID bits. Restrict it to what the SMMU supports
and cache it into master->ssid_bits, which will also be used for PCI
PASID.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Since commit 518a2f1925 ("dma-mapping: zero memory returned from
dma_alloc_*"), dma_alloc_* always initializes memory to zero, so there
is no need to use dma_zalloc_* or pass the __GFP_ZERO flag anymore.
The flag was introduced by commit 04fa26c71b ("iommu/arm-smmu: Convert
DMA buffer allocations to the managed API"), since the managed API
didn't provide a dmam_zalloc_coherent() function.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Make the SMR mask test more robust against SMR0 being live
at probe time, which might happen once we start supporting
firmware reservations for framebuffers and suchlike.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Now that we can correctly extract top-level indices without relying on
the remaining upper bits being zero, the only remaining impediments to
using a given table for TTBR1 are the address validation on map/unmap
and the awkward TCR translation granule format. Add a quirk so that we
can do the right thing at those points.
Tested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Commit 05a648cd2dd7 ("iommu/io-pgtable-arm: Rationalise TCR handling")
reworked the way in which the TCR register value is returned from the
io-pgtable code when targetting the Arm long-descriptor format, in
preparation for allowing page-tables to target TTBR1.
As it turns out, the new interface is a lot nicer to use, so do the same
conversion for the VTCR register even though there is only a single base
register for stage-2 translation.
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Now that we have arm-smmu.h defining various SMMU constants, ensure that
they are namespaced with the ARM_SMMU_ prefix in order to avoid conflicts
with the CPU, such as the one we're currently bodging around with the
TCR.
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Although it's conceptually nice for the io_pgtable_cfg to provide a
standard VMSA TCR value, the reality is that no VMSA-compliant IOMMU
looks exactly like an Arm CPU, and they all have various other TCR
controls which io-pgtable can't be expected to understand. Thus since
there is an expectation that drivers will have to add to the given TCR
value anyway, let's strip it down to just the essentials that are
directly relevant to io-pgtable's inner workings - namely the various
sizes and the walk attributes.
Tested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Add missing include of bitfield.h]
Signed-off-by: Will Deacon <will@kernel.org>
ARM_64_LPAE_S2_TCR_RES1 is intended to map to bit 31 of the VTCR register,
which is required to be set to 1 by the architecture. Unfortunately, we
accidentally treat this as a signed quantity which means we also set the
upper 32 bits of the VTCR to one, and they are required to be zero.
Treat ARM_64_LPAE_S2_TCR_RES1 as unsigned to avoid the unwanted
sign-extension up to 64 bits.
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
By VMSA rules, using Normal Non-Cacheable type with a shareability
attribute of anything other than Outer Shareable is liable to lead into
unpredictable territory:
| Overlaying the shareability attribute (B3-1377, ARM DDI 0406C.c)
|
| A memory region with a resultant memory type attribute of Normal, and
| a resultant cacheability attribute of Inner Non-cacheable, Outer
| Non-cacheable, must have a resultant shareability attribute of Outer
| Shareable, otherwise shareability is UNPREDICTABLE
Although the SMMU architectures seem to give some slightly stronger
guarantees of Non-Cacheable output types becoming implicitly Outer
Shareable in most cases, we may as well be explicit and not take any
chances. It's also weird that LPAE attribute handling is currently split
between prot_to_pte() and init_pte() given that it can all be statically
determined up-front. Thus, collect *all* the LPAE attributes into
prot_to_pte() in order to logically pick the shareability based on the
incoming IOMMU API prot value, and tweak the short-descriptor code to
stop setting TTBR0.NOS for Non-Cacheable walks.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Commit 9e6ea59f3f ("iommu/io-pgtable: Support non-coherent page tables")
added support for non-coherent page-table walks to the Arm IOMMU page-table
backends. Unfortunately, it left the stage-2 allocator unchanged, so let's
hook that up in the same way.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
TTBR1 values have so far been redundant since no users implement any
support for split address spaces. Crucially, though, one of the main
reasons for wanting to do so is to be able to manage each half entirely
independently, e.g. context-switching one set of mappings without
disturbing the other. Thus it seems unlikely that tying two tables
together in a single io_pgtable_cfg would ever be particularly desirable
or useful.
Streamline the configs to just a single conceptual TTBR value
representing the allocated table. This paves the way for future users to
support split address spaces by simply allocating a table and dealing
with the detailed TTBRn logistics themselves.
Tested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Drop change to ttbr value]
Signed-off-by: Will Deacon <will@kernel.org>
For ARCH=arm builds, OF is not necessarily enabled, that is, you can
build this driver without CONFIG_OF.
When CONFIG_OF is unset, of_match_ptr() is NULL, and arm_smmu_of_match
is left orphan.
Building it with W=1 emits a warning:
drivers/iommu/arm-smmu.c:1904:34: warning: ‘arm_smmu_of_match’ defined but not used [-Wunused-const-variable=]
static const struct of_device_id arm_smmu_of_match[] = {
^~~~~~~~~~~~~~~~~
There are two ways to fix this:
- annotate arm_smmu_of_match with __maybe_unused (or surround the
code with #ifdef CONFIG_OF ... #endif)
- stop using of_match_ptr()
This commit took the latter solution.
It slightly increases the object size, but it is probably not a big deal
because arm_smmu_device_dt_probe() is also compiled irrespective of
CONFIG_OF.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
The CONFIG option controlling this driver, ARM_SMMU_V3,
depends on ARM64, which select's OF.
So, CONFIG_OF is always defined when building this driver.
of_match_ptr(arm_smmu_of_match) is the same as arm_smmu_of_match.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
This is an off-by-one mistake.
resource_size() returns res->end - res->start + 1.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
CMDQ_OP_TLBI_NH_VA requires VMID and this was missing since
commit 1c27df1c0a ("iommu/arm-smmu: Use correct address mask
for CMD_TLBI_S2_IPA"). Add it back.
Fixes: 1c27df1c0a ("iommu/arm-smmu: Use correct address mask for CMD_TLBI_S2_IPA")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Requiring each IOMMU driver to initialise the 'owner' field of their
'struct iommu_ops' is error-prone and easily forgotten. Follow the
example set by PCI and USB by assigning THIS_MODULE automatically when
registering the ops structure with IOMMU core.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Will Deacon <will@kernel.org>
The commit c18647900e ("iommu/dma: Relax locking in
iommu_dma_prepare_msi()") introduced a compliation warning,
drivers/iommu/dma-iommu.c: In function 'iommu_dma_prepare_msi':
drivers/iommu/dma-iommu.c:1206:27: warning: variable 'cookie' set but
not used [-Wunused-but-set-variable]
struct iommu_dma_cookie *cookie;
^~~~~~
Fixes: c18647900e ("iommu/dma: Relax locking in iommu_dma_prepare_msi()")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If the device fails to be added to the group, make sure to unlink the
reference before returning.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Fixes: 39ab9555c2 ("iommu: Add sysfs bindings for struct iommu_device")
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds the missing teardown step that removes the device link from
the group when the device addition fails.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Fixes: 797a8b4d76 ("iommu: Handle default domain attach failure")
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The bit 13 and bit 14 of the IOMMU control register are
PPRLogEn and PPRIntEn. They are related to PPR (Peripheral Page
Request) instead of 'PPF'. Fix them accrodingly.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The usage of the local variables 'range' and 'misc' was removed
from commit 226e889b20 ("iommu/amd: Remove first/last_device handling")
and commit 23c742db21 ("iommu/amd: Split out PCI related parts of
IOMMU initialization"). So, remove them accrodingly.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After we make all map/unmap paths support first level page table.
Let's turn it on if hardware supports scalable mode.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
First-level translation may map input addresses to 4-KByte pages,
2-MByte pages, or 1-GByte pages. Support for 4-KByte pages and
2-Mbyte pages are mandatory for first-level translation. Hardware
support for 1-GByte page is reported through the FL1GP field in
the Capability Register.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
First-level translation restricts the input-address to a canonical
address (i.e., address bits 63:N have the same value as address
bit [N-1], where N is 48-bits with 4-level paging and 57-bits with
5-level paging). (section 3.6 in the spec)
This makes first level IOVA canonical by using IOVA with bit [N-1]
always cleared.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When software has changed first-level tables, it should invalidate
the affected IOTLB and the paging-structure-caches using the PASID-
based-IOTLB Invalidate Descriptor defined in spec 6.5.2.4.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Intel VT-d in scalable mode supports two types of page tables for
IOVA translation: first level and second level. The IOMMU driver
can choose one from both for IOVA translation according to the use
case. This sets up the pasid entry if a domain is selected to use
the first-level page table for iova translation.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current intel_pasid_setup_first_level() use 5-level paging for
first level translation if CPUs use 5-level paging mode too.
This makes sense for SVA usages since the page table is shared
between CPUs and IOMMUs. But it makes no sense if we only want
to use first level for IOVA translation. Add PASID_FLAG_FL5LP
bit in the flags which indicates whether the 5-level paging
mode should be used.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds the Intel VT-d specific callback of setting
DOMAIN_ATTR_NESTING domain attribution. It is necessary
to let the VT-d driver know that the domain represents
a virtual machine which requires the IOMMU hardware to
support nested translation mode. Return success if the
IOMMU hardware suports nested mode, otherwise failure.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This checks whether a domain should use the first level page
table for map/unmap and marks it in the domain structure.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently if flush queue initialization fails, we return error
or enforce the system-wide strict mode. These are unnecessary
because we always check the existence of a flush queue before
queuing any iova's for lazy flushing. Printing a informational
message is enough.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If Intel IOMMU strict mode is enabled by users, it's unnecessary
to create the iova flush queue.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use combined macros for_each_svm_dev() to simplify SVM device iteration
and error checking.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Page responses should only be sent when last page in group (LPIG) or
private data is present in the page request. This patch avoids sending
invalid descriptors.
Fixes: 5d308fc1ec ("iommu/vt-d: Add 256-bit invalidation descriptor support")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make use of generic IOASID code to manage PASID allocation,
free, and lookup. Replace Intel specific code.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PASID allocator uses IDR which is exclusive for the end of the
allocation range. There is no need to decrement pasid_max.
Fixes: af39507305 ("iommu/vt-d: Apply global PASID in SVA")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After each setup for PASID entry, related translation caches must be
flushed. We can combine duplicated code into one function which is less
error prone.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a check during SVM bind to ensure CPU and IOMMU hardware capabilities
are met.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When setting up first level page tables for sharing with CPU, we need
to ensure IOMMU can support no less than the levels supported by the
CPU.
It is not adequate, as in the current code, to set up 5-level paging
in PASID entry First Level Paging Mode(FLPM) solely based on CPU.
Currently, intel_pasid_setup_first_level() is only used by native SVM
code which already checks paging mode matches. However, future use of
this helper function may not be limited to native SVM.
https://lkml.org/lkml/2019/11/18/1037
Fixes: 437f35e1cd ("iommu/vt-d: Add first level page table interface")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Shared Virtual Memory(SVM) is based on a collective set of hardware
features detected at runtime. There are requirements for matching CPU
and IOMMU capabilities.
The current code checks CPU and IOMMU feature set for SVM support but
the result is never stored nor used. Therefore, SVM can still be used
even when these checks failed. The consequences can be:
1. CPU uses 5-level paging mode for virtual address of 57 bits, but
IOMMU can only support 4-level paging mode with 48 bits address for DMA.
2. 1GB page size is used by CPU but IOMMU does not support it. VT-d
unrecoverable faults may be generated.
The best solution to fix these problems is to prevent them in the first
place.
This patch consolidates code for checking PASID, CPU vs. IOMMU paging
mode compatibility, as well as provides specific error messages for
each failed checks. On sane hardware configurations, these error message
shall never appear in kernel log.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds Kconfig option INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
to make it easier for distributions to enable or disable the
Intel IOMMU scalable mode by default during kernel build.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The iommu variable in set_device_exclusion_range() us unused
now and causes a compiler warning. Remove it.
Fixes: 387caf0b75 ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new standard function instead of open-coding it.
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: virtualization@lists.linux-foundation.org
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new standard function instead of open-coding it.
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new standard function instead of open-coding it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new standard function instead of open-coding it.
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement a generic function for removing reserved regions. This can be
used by drivers that don't do anything fancy with these regions other
than allocating memory for them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current implementation for IOMMU x2APIC support makes use of
the MMIO access to MSI capability block registers, which requires
checking EFR[MsiCapMmioSup]. However, only IVHD type 11h/40h contain
the information, and not in the IVHD type 10h IOMMU feature reporting
field. Since the BIOS in newer systems, which supports x2APIC, would
normally contain IVHD type 11h/40h, remove the IOMMU_FEAT_XTSUP_SHIFT
check for IVHD type 10h, and only support x2APIC with IVHD type 11h/40h.
Fixes: 6692981295 ('iommu/amd: Add support for X2APIC IOMMU interrupts')
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU MMIO access to MSI capability registers is available only if
the EFR[MsiCapMmioSup] is set. Current implementation assumes this bit
is set if the EFR[XtSup] is set, which might not be the case.
Fix by checking the EFR[MsiCapMmioSup] before accessing the MSI address
low/high and MSI data registers via the MMIO.
Fixes: 6692981295 ('iommu/amd: Add support for X2APIC IOMMU interrupts')
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some buggy BIOSes might define multiple exclusion ranges of the
IVMD entries which are associated with the same IOMMU hardware.
This leads to the overwritten exclusion range (exclusion_start
and exclusion_length members) in set_device_exclusion_range().
Here is a real case:
When attaching two Broadcom RAID controllers to a server, the first
one reports the failure during booting (the disks connecting to the
RAID controller cannot be detected).
This patch prevents the issue by treating per-device exclusion
ranges as r/w unity-mapped regions.
Discussion:
* https://lists.linuxfoundation.org/pipermail/iommu/2019-November/040140.html
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
I no longer work for Arm, so update the stale reference to my old email
address.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
By conditionally dropping support for the legacy binding and exporting
the newly introduced 'arm_smmu_impl_init()' function we can allow the
ARM SMMU driver to be built as a module.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When removing the SMMU driver, we need to clear any state that we
registered during probe. This includes our bus ops, sysfs entries and
the IOMMU device registered for early firmware probing of masters.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
By removing the redundant call to 'pci_request_acs()' we can allow the
ARM SMMUv3 driver to be built as a module.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support for SMMU drivers built as modules to the ACPI/IORT device
probing path, by deferring the probe of the master if the SMMU driver is
known to exist but has not been loaded yet. Given that the IORT code
registers a platform device for each SMMU that it discovers, we can
easily trigger the udev based autoloading of the SMMU drivers by making
the platform device identifier part of the module alias.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: John Garry <john.garry@huawei.com> # only manual smmu ko loading
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When removing the SMMUv3 driver, we need to clear any state that we
registered during probe. This includes our bus ops, sysfs entries and
the IOMMU device registered for early firmware probing of masters.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Forcefully unbinding the Arm SMMU drivers is a pretty dangerous operation,
since it will likely lead to catastrophic failure for any DMA devices
mastering through the SMMU being unbound. When the driver then attempts
to "handle" the fatal faults, it's very easy to trip over dead data
structures, leading to use-after-free.
On John's machine, he reports that the machine was "unusable" due to
loss of the storage controller following a forced unbind of the SMMUv3
driver:
| # cd ./bus/platform/drivers/arm-smmu-v3
| # echo arm-smmu-v3.0.auto > unbind
| hisi_sas_v2_hw HISI0162:01: CQE_AXI_W_ERR (0x800) found!
| platform arm-smmu-v3.0.auto: CMD_SYNC timeout at 0x00000146
| [hwprod 0x00000146, hwcons 0x00000000]
Prevent this forced unbinding of the drivers by setting "suppress_bind_attrs"
to true.
Link: https://lore.kernel.org/lkml/06dfd385-1af0-3106-4cc5-6a5b8e864759@huawei.com
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit addb672f20.
Let's get the SMMU driver building as a module, which means putting
back some dead code that we used to carry.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit c07b6426df.
Let's get the SMMUv3 driver building as a module, which means putting
back some dead code that we used to carry.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
'bus_set_iommu()' allows IOMMU drivers to register their ops for a given
bus type. Unfortunately, it then doesn't allow them to be removed, which
is necessary for modular drivers to shutdown cleanly so that they can be
reloaded later on.
Allow 'bus_set_iommu()' to take a NULL 'ops' argument, which clear the
ops pointer for the selected bus_type.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Ensure that we hold a reference to the IOMMU driver module while calling
the '->of_xlate()' callback during early device probing.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To avoid accidental removal of an active IOMMU driver module, take a
reference to the driver module in 'iommu_probe_device()' immediately
prior to invoking the '->add_device()' callback and hold it until the
after the device has been removed by '->remove_device()'.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To avoid having to export 'pci_request_acs()' to modular IOMMU drivers,
move the call into the 'of_dma_configure()' path in a similar manner to
the way in which ACS is configured when probing via ACPI/IORT.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Building IOMMU drivers as modules requires that the core IOMMU API
symbols are exported as GPL symbols.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Fix kmemleak warning in IOVA code
- Fix compile warnings on ARM32/64 in dma-iommu code due to
dma_mask type mismatches
- Make ISA reserved regions relaxable, so that VFIO can assign
devices which have such regions defined
- Fix mapping errors resulting in IO page-faults in the VT-d
driver
- Make sure direct mappings for a domain are created after the
default domain is updated
- Map ISA reserved regions in the VT-d driver with correct
permissions
- Remove unneeded check for PSI capability in the IOTLB flush
code of the VT-d driver
- Lockdep fix iommu_dma_prepare_msi()
-----BEGIN PGP SIGNATURE-----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=VWME
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix kmemleak warning in IOVA code
- Fix compile warnings on ARM32/64 in dma-iommu code due to dma_mask
type mismatches
- Make ISA reserved regions relaxable, so that VFIO can assign devices
which have such regions defined
- Fix mapping errors resulting in IO page-faults in the VT-d driver
- Make sure direct mappings for a domain are created after the default
domain is updated
- Map ISA reserved regions in the VT-d driver with correct permissions
- Remove unneeded check for PSI capability in the IOTLB flush code of
the VT-d driver
- Lockdep fix iommu_dma_prepare_msi()
* tag 'iommu-fixes-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dma: Relax locking in iommu_dma_prepare_msi()
iommu/vt-d: Remove incorrect PSI capability check
iommu/vt-d: Allocate reserved region for ISA with correct permission
iommu: set group default domain before creating direct mappings
iommu/vt-d: Fix dmar pte read access not set error
iommu/vt-d: Set ISA bridge reserved region as relaxable
iommu/dma: Rationalise types for DMA masks
iommu/iova: Init the struct iova to fix the possible memleak
Add a "nr_devfns" parameter to pci_add_dma_alias() so it can be used to
create DMA aliases for a range of devfns.
[bhelgaas: incorporate nr_devfns fix from James, update
quirk_pex_vca_alias() and setup_aliases()]
Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Since commit ece6e6f021 ("iommu/dma-iommu: Split iommu_dma_map_msi_msg()
in two parts"), iommu_dma_prepare_msi() should no longer have to worry
about preempting itself, nor being called in atomic context at all. Thus
we can downgrade the IRQ-safe locking to a simple mutex to avoid angering
the new might_sleep() check in iommu_map().
Reported-by: Qian Cai <cai@lca.pw>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The PSI (Page Selective Invalidation) bit in the capability register
is only valid for second-level translation. Intel IOMMU supporting
scalable mode must support page/address selective IOTLB invalidation
for first-level translation. Remove the PSI capability check in SVA
cache invalidation code.
Fixes: 8744daf4b0 ("iommu/vt-d: Remove global page flush support")
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently the reserved region for ISA is allocated with no
permissions. If a dma domain is being used, mapping this region will
fail. Set the permissions to DMA_PTE_READ|DMA_PTE_WRITE.
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: stable@vger.kernel.org # v5.3+
Fixes: d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via iommu_get_resv_regions")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_group_create_direct_mappings uses group->default_domain, but
right after it is called, request_default_domain_for_dev calls
iommu_domain_free for the default domain, and sets the group default
domain to a different domain. Move the
iommu_group_create_direct_mappings call to after the group default
domain is set, so the direct mappings get associated with that domain.
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: stable@vger.kernel.org
Fixes: 7423e01741 ("iommu: Add API to request DMA domain for device")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If the default DMA domain of a group doesn't fit a device, it
will still sit in the group but use a private identity domain.
When map/unmap/iova_to_phys come through iommu API, the driver
should still serve them, otherwise, other devices in the same
group will be impacted. Since identity domain has been mapped
with the whole available memory space and RMRRs, we don't need
to worry about the impact on it.
Link: https://www.spinics.net/lists/iommu/msg40416.html
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: 942067f1b6 ("iommu/vt-d: Identify default domains replaced with private")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via
iommu_get_resv_regions") created a direct-mapped reserved memory region
in order to replace the static identity mapping of the ISA address
space, where the latter was then removed in commit df4f3c603a
("iommu/vt-d: Remove static identity map code"). According to the
history of this code and the Kconfig option surrounding it, this direct
mapping exists for the benefit of legacy ISA drivers that are not
compatible with the DMA API.
In conjuntion with commit 9b77e5c798 ("vfio/type1: check dma map
request is within a valid iova range") this change introduced a
regression where the vfio IOMMU backend enforces reserved memory regions
per IOMMU group, preventing userspace from creating IOMMU mappings
conflicting with prescribed reserved regions. A necessary prerequisite
for the vfio change was the introduction of "relaxable" direct mappings
introduced by commit adfd373820 ("iommu: Introduce
IOMMU_RESV_DIRECT_RELAXABLE reserved memory regions"). These relaxable
direct mappings provide the same identity mapping support in the default
domain, but also indicate that the reservation is software imposed and
may be relaxed under some conditions, such as device assignment.
Convert the ISA bridge direct-mapped reserved region to relaxable to
reflect that the restriction is self imposed and need not be enforced
by drivers such as vfio.
Fixes: 1c5c59fbad ("iommu/vt-d: Differentiate relaxable and non relaxable RMRRs")
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/linux-iommu/20191211082304.2d4fab45@x1.home
Reported-by: cprt <cprt@protonmail.com>
Tested-by: cprt <cprt@protonmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since iommu_dma_alloc_iova() combines incoming masks with the u64 bus
limit, it makes more sense to pass them around in their native u64
rather than converting to dma_addr_t early. Do that, and resolve the
remaining type discrepancy against the domain geometry with a cheeky
cast to keep things simple.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In case the new region gets merged into another one, the nr list node is
freed. Checking its type while completing the merge algorithm leads to
a use-after-free. Use new->type instead.
Fixes: 4dbd258ff6 ("iommu: Revisit iommu_insert_resv_region() implementation")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Stable <stable@vger.kernel.org> #v5.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl3leXUUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vyY3g/9FAVVdPEaadNtAhQ/zIxcjozDovKq
0q7yOA3aTBTUoNEinm88an6p0dcC4gNKtGukXmzVH2Hhxm9kLRdtpZGYY00tpLUB
9rI7XsgwwHa+hLwsHbIs507sKGFGy5FLr0ChTTGLDEMppnEvjA2hZooYmcB/OgrC
LlFcwbNKGOk/Si9u2bF2nLO0JDoVHnwzpF99saew/nqc7Lfj9e9IPZFom+VjPBUh
AOvRp2H7uBN+WQlpLeFeMDDoeXh34lX0kYqIV/cVkXVnknDGYKV2CBTg2aeX7jd0
QiPHZh6zlW8zNQgaCZRiBAbatVEOnRMRJ++yiqB8hBYp1LMXm6kJ01YSQpXkugoY
Vp9dtzzTARWV/XkKwD4brw9ZEmIDnO+Ed2x2VbUkPJVcXAvzSQWAx82IU0Iuqmcb
9qr6U2Zf/Xk5aFlGPYVH8QOG+QqzIbZNRQ7NlhDlITyW4P6QPu0mw374yYP2wDGL
sP5YSS3YGa0sQcEgDtVnd4z+WTZI4AwXLPaeaLkDhdfHp2FsERUY4TrPs33J99xw
og4EyokVFzjYzlnBPU6WWn7LL+jj5ccXkL3MA4DR4FJOnNGHh7NXfQUH56rrgsq7
F9/8shL5DuTbQkde1uSyUG9Iq/RigVLlV5DQavFm3dSXvZi0E16t5alC5URNTzk7
at8Bogn53QhlmYc=
=uUXw
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Warn if a host bridge has no NUMA info (Yunsheng Lin)
- Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
Efremov)
Resource management:
- Fix boot-time Embedded Controller GPE storm caused by incorrect
resource assignment after ACPI Bus Check Notification (Mika
Westerberg)
- Protect pci_reassign_bridge_resources() against concurrent
addition/removal (Benjamin Herrenschmidt)
- Fix bridge dma_ranges resource list cleanup (Rob Herring)
- Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
the MMIO and prefetchable MMIO window sizes of hotplug bridges
independently (Nicholas Johnson)
- Fix MMIO/MMIO_PREF window assignment that assigned more space than
desired (Nicholas Johnson)
- Only enforce bus numbers from bridge EA if the bridge has EA
devices downstream (Subbaraya Sundeep)
- Consolidate DT "dma-ranges" parsing and convert all host drivers to
use shared parsing (Rob Herring)
Error reporting:
- Restore AER capability after resume (Mayurkumar Patel)
- Add PoisonTLPBlocked AER counter (Rajat Jain)
- Use for_each_set_bit() to simplify AER code (Andy Shevchenko)
- Fix AER kernel-doc (Andy Shevchenko)
- Add "pcie_ports=dpc-native" parameter to allow native use of DPC
even if platform didn't grant control over AER (Olof Johansson)
Hotplug:
- Avoid returning prematurely from sysfs requests to enable or
disable a PCIe hotplug slot (Lukas Wunner)
- Don't disable interrupts twice when suspending hotplug ports (Mika
Westerberg)
- Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
Westerberg)
Power management:
- Remove unnecessary ASPM locking (Bjorn Helgaas)
- Add support for disabling L1 PM Substates (Heiner Kallweit)
- Allow re-enabling Clock PM after it has been disabled (Heiner
Kallweit)
- Add sysfs attributes for controlling ASPM link states (Heiner
Kallweit)
- Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
sysfs files (Heiner Kallweit)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
USB 2.0 or 1.1 connect events (Kai-Heng Feng)
- Move power state check out of pci_msi_supported() (Bjorn Helgaas)
- Fix incorrect MSI-X masking on resume and revert related nvme quirk
for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)
- Always return devices to D0 when thawing to fix hibernation with
drivers like mlx4 that used legacy power management (previously we
only did it for drivers with new power management ops) (Dexuan Cui)
- Clear PCIe PME Status even for legacy power management (Bjorn
Helgaas)
- Fix PCI PM documentation errors (Bjorn Helgaas)
- Use dev_printk() for more power management messages (Bjorn Helgaas)
- Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)
- Convert xen-platform from legacy to generic power management (Bjorn
Helgaas)
- Removed unused .resume_early() and .suspend_late() legacy power
management hooks (Bjorn Helgaas)
- Rearrange power management code for clarity (Rafael J. Wysocki)
- Decode power states more clearly ("4" or "D4" really refers to
"D3cold") (Bjorn Helgaas)
- Notice when reading PM Control register returns an error (~0)
instead of interpreting it as being in D3hot (Bjorn Helgaas)
- Add missing link delays required by the PCIe spec (Mika Westerberg)
Virtualization:
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the
VFs, but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and
associated VFs can be enabled independently (Kuppuswamy
Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn
Helgaas)
- Hide PRI and PASID state restoration functions used only inside the
PCI core (Bjorn Helgaas)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
Cherian)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Unify ACS quirk implementations (Bjorn Helgaas)
Amlogic Meson host bridge driver:
- Fix meson PERST# GPIO polarity problem (Remi Pommarel)
- Add DT bindings for Amlogic Meson G12A (Neil Armstrong)
- Fix meson clock names to match DT bindings (Neil Armstrong)
- Add meson support for Amlogic G12A SoC with separate shared PHY
(Neil Armstrong)
- Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
combo PHY (Neil Armstrong)
- Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)
- Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
(Neil Armstrong)
Broadcom iProc host bridge driver:
- Invalidate iProc PAXB address mapping before programming it
(Abhishek Shah)
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)
Cadence host bridge driver:
- Refactor Cadence PCIe host controller to use as a library for both
host and endpoint (Tom Joseph)
Freescale Layerscape host bridge driver:
- Add layerscape LS1028a support (Xiaowei Bao)
Intel VMD host bridge driver:
- Add VMD bus 224-255 restriction decode (Jon Derrick)
- Add VMD 8086:9A0B device ID (Jon Derrick)
- Remove Keith from VMD maintainer list (Keith Busch)
Marvell ARMADA 3700 / Aardvark host bridge driver:
- Use LTSSM state to build link training flag since Aardvark doesn't
implement the Link Training bit (Remi Pommarel)
- Delay before training Aardvark link in case PERST# was asserted
before the driver probe (Remi Pommarel)
- Fix Aardvark issues with Root Control reads and writes (Remi
Pommarel)
- Don't rely on jiffies in Aardvark config access path since
interrupts may be disabled (Remi Pommarel)
- Fix Aardvark big-endian support (Grzegorz Jaszczyk)
Marvell ARMADA 370 / XP host bridge driver:
- Make mvebu_pci_bridge_emul_ops static (Ben Dooks)
Microsoft Hyper-V host bridge driver:
- Add hibernation support for Hyper-V virtual PCI devices (Dexuan
Cui)
- Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
Cui)
- Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)
Mobiveil host bridge driver:
- Change mobiveil csr_read()/write() function names that conflict
with riscv arch functions (Kefeng Wang)
NVIDIA Tegra host bridge driver:
- Fix Tegra CLKREQ dependency programming (Vidya Sagar)
Renesas R-Car host bridge driver:
- Remove unnecessary header include from rcar (Andrew Murray)
- Tighten register index checking for rcar inbound range programming
(Marek Vasut)
- Fix rcar inbound range alignment calculation to improve packing of
multiple entries (Marek Vasut)
- Update rcar MACCTLR setting to match documentation (Yoshihiro
Shimoda)
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
(Yoshihiro Shimoda)
- Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
Horman)
Rockchip host bridge driver:
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
Murphy)
Socionext UniPhier host bridge driver:
- Set uniphier to host (RC) mode always (Kunihiko Hayashi)
Endpoint drivers:
- Fix endpoint driver sign extension problem when shifting page
number to phys_addr_t (Alan Mikhak)
Misc:
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word()
in AMDGPU and Radeon CIK/SI (Frederick Lawler)
- Remove unused pci_irq_get_node() Greg Kroah-Hartman)
- Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
(Palmer Dabbelt, Michal Simek)
- Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Fix bridge emulation big-endian support (Grzegorz Jaszczyk)
- Fix dwc find_next_bit() usage (Niklas Cassel)
- Fix pcitest.c fd leak (Hewenliang)
- Fix typos and comments (Bjorn Helgaas)
- Fix Kconfig whitespace errors (Krzysztof Kozlowski)"
* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
asm-generic: Make msi.h a mandatory include/asm header
Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
PCI/MSI: Fix incorrect MSI-X masking on resume
PCI/MSI: Move power state check out of pci_msi_supported()
PCI/MSI: Remove unused pci_irq_get_node()
PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
PCI: hv: Change pci_protocol_version to per-hbus
PCI: hv: Add hibernation support
PCI: hv: Reorganize the code in preparation of hibernation
MAINTAINERS: Remove Keith from VMD maintainer
PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
PCI/ASPM: Add sysfs attributes for controlling ASPM link states
PCI: Fix indentation
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
PCI: uniphier: Set mode register to host mode
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
...
Including:
- Conversion of the AMD IOMMU driver to use the dma-iommu code
for imlementing the DMA-API. This gets rid of quite some code
in the driver itself, but also has some potential for
regressions (non are known at the moment).
- Support for the Qualcomm SMMUv2 implementation in the SDM845
SoC. This also includes some firmware interface changes, but
those are acked by the respective maintainers.
- Preparatory work to support two distinct page-tables per
domain in the ARM-SMMU driver
- Power management improvements for the ARM SMMUv2
- Custom PASID allocator support
- Multiple PCI DMA alias support for the AMD IOMMU driver
- Adaption of the Mediatek driver to the changed IO/TLB flush
interface of the IOMMU core code.
- Preparatory patches for the Renesas IOMMU driver to support
future hardware.
-----BEGIN PGP SIGNATURE-----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=ntaE
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Conversion of the AMD IOMMU driver to use the dma-iommu code for
imlementing the DMA-API. This gets rid of quite some code in the
driver itself, but also has some potential for regressions (non are
known at the moment).
- Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC.
This also includes some firmware interface changes, but those are
acked by the respective maintainers.
- Preparatory work to support two distinct page-tables per domain in
the ARM-SMMU driver
- Power management improvements for the ARM SMMUv2
- Custom PASID allocator support
- Multiple PCI DMA alias support for the AMD IOMMU driver
- Adaption of the Mediatek driver to the changed IO/TLB flush interface
of the IOMMU core code.
- Preparatory patches for the Renesas IOMMU driver to support future
hardware.
* tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (62 commits)
iommu/rockchip: Don't provoke WARN for harmless IRQs
iommu/vt-d: Turn off translations at shutdown
iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved
iommu/arm-smmu: Remove duplicate error message
iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing
iommu/ipmmu-vmsa: Add utlb_offset_base
iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers
iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro
iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers
iommu/ipmmu-vmsa: tidyup register definitions
iommu/ipmmu-vmsa: Remove all unused register definitions
iommu/mediatek: Reduce the tlb flush timeout value
iommu/mediatek: Get rid of the pgtlock
iommu/mediatek: Move the tlb_sync into tlb_flush
iommu/mediatek: Delete the leaf in the tlb_flush
iommu/mediatek: Use gather to achieve the tlb range flush
iommu/mediatek: Add a new tlb_lock for tlb_flush
iommu/mediatek: Correct the flush_iotlb_all callback
iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve doc
iommu/io-pgtable-arm: Rationalise MAIR handling
...
- Hibernation support (Dexuan Cui).
- Latency testing framework (Branden Bonaby).
- Decoupling Hyper-V page size from guest page size (Himadri Pandya).
-----BEGIN PGP SIGNATURE-----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=oJGE
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- support for new VMBus protocols (Andrea Parri)
- hibernation support (Dexuan Cui)
- latency testing framework (Branden Bonaby)
- decoupling Hyper-V page size from guest page size (Himadri Pandya)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
drivers/hv: Replace binary semaphore with mutex
drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
HID: hyperv: Add the support of hibernation
hv_balloon: Add the support of hibernation
x86/hyperv: Implement hv_is_hibernation_supported()
Drivers: hv: balloon: Remove dependencies on guest page size
Drivers: hv: vmbus: Remove dependencies on guest page size
x86: hv: Add function to allocate zeroed page for Hyper-V
Drivers: hv: util: Specify ring buffer size using Hyper-V page size
Drivers: hv: Specify receive buffer size using Hyper-V page size
tools: hv: add vmbus testing tool
drivers: hv: vmbus: Introduce latency testing
video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
hv_netvsc: Add the support of hibernation
hv_sock: Add the support of hibernation
video: hyperv_fb: Add the support of hibernation
scsi: storvsc: Add the support of hibernation
Drivers: hv: vmbus: Add module parameter to cap the VMBus version
...
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using
DMA offsets (Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code
(Nicolas Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
-----BEGIN PGP SIGNATURE-----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=e5wO
-----END PGP SIGNATURE-----
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the VFs,
but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and associated
VFs can be enabled independently (Kuppuswamy Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas)
- Hide PRI and PASID state restoration functions used only inside the PCI
core (Bjorn Helgaas)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian)
- Unify ACS quirk implementations (Bjorn Helgaas)
* pci/virtualization:
PCI: Unify ACS quirk desired vs provided checking
PCI: Make ACS quirk implementations more uniform
PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3
PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes
PCI: Add DMA alias quirk for Intel VCA NTB
PCI: Fix Intel ACS quirk UPDCR register address
PCI/ATS: Make pci_restore_pri_state(), pci_restore_pasid_state() private
PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL()
PCI/ATS: Remove unused PRI and PASID stubs
PCI/ATS: Consolidate ATS declarations in linux/pci-ats.h
PCI/ATS: Cache PRI PRG Response PASID Required bit
PCI/ATS: Cache PASID Capability offset
PCI/ATS: Cache PRI Capability offset
PCI/ATS: Disable PF/VF ATS service independently
PCI/ATS: Handle sharing of PF PASID Capability with all VFs
PCI/ATS: Handle sharing of PF PRI Capability with all VFs
PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI
iommu/vt-d: Select PCI_PRI for INTEL_IOMMU_SVM
Currently hyperv-iommu is implemented in a x86 specific way, for
example, apic is used. So make the HYPERV_IOMMU Kconfig depend on X86
as a preparation for enabling HyperV on architecture other than x86.
Cc: Lan Tianyu <Tianyu.Lan@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: linux-hyperv@vger.kernel.org
Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Using a mask to represent bus DMA constraints has a set of limitations.
The biggest one being it can only hold a power of two (minus one). The
DMA mapping code is already aware of this and treats dev->bus_dma_mask
as a limit. This quirk is already used by some architectures although
still rare.
With the introduction of the Raspberry Pi 4 we've found a new contender
for the use of bus DMA limits, as its PCIe bus can only address the
lower 3GB of memory (of a total of 4GB). This is impossible to represent
with a mask. To make things worse the device-tree code rounds non power
of two bus DMA limits to the next power of two, which is unacceptable in
this case.
In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all
over the tree and treat it as such. Note that dev->bus_dma_limit should
contain the higher accessible DMA address.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove <linux/pci.h> and <linux/msi.h> from being included directly as part
of the include/linux/of_pci.h, and remove superfluous declaration of struct
of_phandle_args.
Move users of include <linux/of_pci.h> to include <linux/pci.h> and
<linux/msi.h> directly rather than rely on both being included transitively
through <linux/of_pci.h>.
Link: https://lore.kernel.org/r/20190903113059.2901-1-kw@linux.com
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
These are pure cache maintainance routines, so drop the unused
struct device argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Although we don't generally expect IRQs to fire for a suspended IOMMU,
there are certain situations (particularly with debug options) where
we might legitimately end up with the pm_runtime_get_if_in_use() call
from rk_iommu_irq() returning 0. Since this doesn't represent an actual
error, follow the other parts of the driver and save the WARN_ON()
condition for a genuine negative value. Even if we do have spurious
IRQs due to a wedged VOP asserting the shared line, it's not this
driver's job to try to second-guess the IRQ core to warn about that.
Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The intel-iommu driver assumes that the iommu state is
cleaned up at the start of the new kernel.
But, when we try to kexec boot something other than the
Linux kernel, the cleanup cannot be relied upon.
Hence, cleanup before we go down for reboot.
Keeping the cleanup at initialization also, in case BIOS
leaves the IOMMU enabled.
I considered turning off iommu only during kexec reboot, but a clean
shutdown seems always a good idea. But if someone wants to make it
conditional, such as VMM live update, we can do that. There doesn't
seem to be such a condition at this time.
Tested that before, the info message
'DMAR: Translation was enabled for <iommu> but we are not in kdump mode'
would be reported for each iommu. The message will not appear when the
DMA-remapping is not enabled on entry to the kernel.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
VT-d RMRR (Reserved Memory Region Reporting) regions are reserved
for device use only and should not be part of allocable memory pool of OS.
BIOS e820_table reports complete memory map to OS, including OS usable
memory ranges and BIOS reserved memory ranges etc.
x86 BIOS may not be trusted to include RMRR regions as reserved type
of memory in its e820 memory map, hence validate every RMRR entry
with the e820 memory map to make sure the RMRR regions will not be
used by OS for any other purposes.
ia64 EFI is working fine so implement RMRR validation as a dummy function
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Yian Chen <yian.chen@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 7723f4c5ec ("driver core: platform: Add an error message
to platform_get_irq*()"), platform_get_irq() displays an error when the
IRQ isn't found. Remove the error print from the SMMU driver. Note the
slight change of behaviour: no message is printed if platform_get_irq()
returns -EPROBE_DEFER, which probably doesn't concern the SMMU.
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 7723f4c5ec ("driver core: platform: Add an error message
to platform_get_irq*()"), platform_get_irq_byname() displays an error
when the IRQ isn't found. Since the SMMUv3 driver uses that function to
query which interrupt method is available, the message is now displayed
during boot for any SMMUv3 that doesn't implement the combined
interrupt, or that implements MSIs.
[ 20.700337] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ combined not found
[ 20.706508] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ eventq not found
[ 20.712503] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ priq not found
[ 20.718325] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ gerror not found
Use platform_get_irq_byname_optional() to avoid displaying a spurious
error.
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
this patch adds a utlb_offset_base into struct ipmmu_features
for IMUCTR and IMUASID registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
This patch adds helper functions ipmmu_utlb_reg() and
ipmmu_imu{asid,ctr}_write() for "uTLB" registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
this patch uses ipmmu_features values instead of a macro to
calculate context registers offset. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
This patch adds helper functions ipmmu_ctx_{reg,read,write}()
for MMU "context" registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support different registers memory mapping hardware easily
in the future, this patch tidies up the register definitions
as below:
- Add comments to state to which SoCs or SoC families they apply
- Add categories about MMU "context" and uTLB registers
No change behavior.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support different registers memory mapping hardware easily
in the future, this patch removes all unused register
definitions.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reduce the tlb timeout value from 100000us to 1000us. The original value
would make the kernel stuck for 100 ms with interrupts disabled, which
could have other side effects. The flush is expected to always take much
less than 1 ms, so use that instead.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now we have tlb_lock for the HW tlb flush, then pgtable code hasn't
needed the external "pgtlock" for a while. this patch remove the
"pgtlock".
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Right now, the tlb_add_flush_nosync and tlb_sync always appear together.
we merge the two functions into one(also move the tlb_lock into the new
function). No functional change.
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In our tlb range flush, we don't care the "leaf". Remove it to simplify
the code. no functional change.
"granule" also is unnecessary for us, Keep it satisfy the format of
tlb_flush_walk.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the iommu_gather mechanism to achieve the tlb range flush.
Gather the iova range in the "tlb_add_page", then flush the merged iova
range in iotlb_sync.
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API
TLB sync") help move the tlb_sync of unmap from v7s into the iommu
framework. It helps add a new function "mtk_iommu_iotlb_sync", But it
lacked the lock, then it will cause the variable "tlb_flush_active"
may be changed unexpectedly, we could see this warning log randomly:
mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to
full flush
The HW requires tlb_flush/tlb_sync in pairs strictly, this patch adds
a new tlb_lock for tlb operations to fix this issue.
Fixes: 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the correct tlb_flush_all instead of the original one.
Fixes: 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The 'IOMMU_QCOM_SYS_CACHE' IOMMU protection flag is exposed to all
users of the IOMMU API. Despite its name, the idea behind it isn't
especially tied to Qualcomm implementations and could conceivably be
used by other systems.
Rename it to 'IOMMU_SYS_CACHE_ONLY' and update the comment to describe
a bit better the idea behind it.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Isaac J. Manjarres" <isaacm@codeaurora.org>
Signed-off-by: Will Deacon <will@kernel.org>
Between VMSAv8-64 and the various 32-bit formats, there is either one
64-bit MAIR or a pair of 32-bit MAIR0/MAIR1 or NMRR/PMRR registers.
As such, keeping two 64-bit values in io_pgtable_cfg has always been
overkill.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The nature of the LPAE format means that data->pg_shift is always
redundant with data->bits_per_level, since they represent the size of a
page and the number of PTEs per page respectively, and the size of a PTE
is constant. Thus it works out more efficient to only store the latter,
and derive the former via a trivial addition where necessary.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Reworked granule check in iopte_to_paddr()]
Signed-off-by: Will Deacon <will@kernel.org>
We use data->pgd_size directly for the one-off allocation and freeing of
the top-level table, but otherwise it serves for ARM_LPAE_PGD_IDX() to
repeatedly re-calculate the effective number of top-level address bits
it represents. Flip this around so we store the form we most commonly
need, and derive the lesser-used one instead. This cuts a whole bunch of
code out of the map/unmap/iova_to_phys fast-paths.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Beyond a couple of allocation-time calculations, data->levels is only
ever used to derive the start level. Storing the start level directly
leads to a small reduction in object code, which should help eke out a
little more efficiency, and slightly more readable source to boot.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
We're merely checking that the relevant upper bits of each address
are all zero, so there are cheaper ways to achieve that.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
It makes little sense to only validate the requested size after we think
we've found a matching block size - making the check up-front is simple,
and far more logical than waiting to walk off the bottom of the table to
infer that we must have been passed a bogus size to start with.
We're missing an equivalent check on the unmap path, so add that as well
for consistency.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The selftests run as an initcall, but the annotation of the various
callbacks and data seems to be somewhat arbitrary. Add it consistently
for everything related to the selftests.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Merge in ARM SMMU fixes to avoid conflicts in the ARM io-pgtable code.
* for-joerg/arm-smmu/fixes:
iommu/io-pgtable-arm: Support all Mali configurations
iommu/io-pgtable-arm: Correct Mali attributes
iommu/arm-smmu: Free context bitmap in the err path of arm_smmu_init_domain_context
Add reset hook for sdm845 based platforms to turn off
the wait-for-safe sequence.
Understanding how wait-for-safe logic affects USB and UFS performance
on MTP845 and DB845 boards:
Qcom's implementation of arm,mmu-500 adds a WAIT-FOR-SAFE logic
to address under-performance issues in real-time clients, such as
Display, and Camera.
On receiving an invalidation requests, the SMMU forwards SAFE request
to these clients and waits for SAFE ack signal from real-time clients.
The SAFE signal from such clients is used to qualify the start of
invalidation.
This logic is controlled by chicken bits, one for each - MDP (display),
IFE0, and IFE1 (camera), that can be accessed only from secure software
on sdm845.
This configuration, however, degrades the performance of non-real time
clients, such as USB, and UFS etc. This happens because, with wait-for-safe
logic enabled the hardware tries to throttle non-real time clients while
waiting for SAFE ack signals from real-time clients.
On mtp845 and db845 devices, with wait-for-safe logic enabled by the
bootloaders we see degraded performance of USB and UFS when kernel
enables the smmu stage-1 translations for these clients.
Turn off this wait-for-safe logic from the kernel gets us back the perf
of USB and UFS devices until we re-visit this when we start seeing perf
issues on display/camera on upstream supported SDM845 platforms.
The bootloaders on these boards implement secure monitor callbacks to
handle a specific command - QCOM_SCM_SVC_SMMU_PROGRAM with which the
logic can be toggled.
There are other boards such as cheza whose bootloaders don't enable this
logic. Such boards don't implement callbacks to handle the specific SCM
call so disabling this logic for such boards will be a no-op.
This change is inspired by the downstream change from Patrick Daly
to address performance issues with display and camera by handling
this wait-for-safe within separte io-pagetable ops to do TLB
maintenance. So a big thanks to him for the change and for all the
offline discussions.
Without this change the UFS reads are pretty slow:
$ time dd if=/dev/sda of=/dev/zero bs=1048576 count=10 conv=sync
10+0 records in
10+0 records out
10485760 bytes (10.0MB) copied, 22.394903 seconds, 457.2KB/s
real 0m 22.39s
user 0m 0.00s
sys 0m 0.01s
With this change they are back to rock!
$ time dd if=/dev/sda of=/dev/zero bs=1048576 count=300 conv=sync
300+0 records in
300+0 records out
314572800 bytes (300.0MB) copied, 1.030541 seconds, 291.1MB/s
real 0m 1.03s
user 0m 0.00s
sys 0m 0.54s
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Will Deacon <will@kernel.org>
When games, browser, or anything using a lot of GPU buffers exits, there
can be many hundreds or thousands of buffers to unmap and free. If the
GPU is otherwise suspended, this can cause arm-smmu to resume/suspend
for each buffer, resulting 5-10 seconds worth of reprogramming the
context bank (arm_smmu_write_context_bank()/arm_smmu_write_s2cr()/etc).
To the user it would appear that the system just locked up.
A simple solution is to use pm_runtime_put_autosuspend() instead, so we
don't immediately suspend the SMMU device.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>
Remove the variable of return. Issue found by
coccicheck(scripts/coccinelle/misc/returnvar.cocci)
Signed-off-by: Cristiane Naves <cristianenavescardoso09@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Non-Transparent Bridge (NTB) devices (among others) may have many DMA
aliases seeing the hardware will send requests with different device ids
depending on their origin across the bridged hardware.
See commit ad281ecf1c ("PCI: Add DMA alias quirk for Microsemi Switchtec
NTB") for more information on this.
The AMD IOMMU IRQ remapping functionality ignores all PCI aliases for
IRQs so if devices send an interrupt from one of their aliases they
will be blocked on AMD hardware with the IOMMU enabled.
To fix this, ensure IRQ remapping is enabled for all aliases with
MSI interrupts.
This is analogous to the functionality added to the Intel IRQ remapping
code in commit 3f0c625c6a ("iommu/vt-d: Allow interrupts from the entire
bus for aliased devices")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Non-Transparent Bridge (NTB) devices (among others) may have many DMA
aliases seeing the hardware will send requests with different device ids
depending on their origin across the bridged hardware.
See commit ad281ecf1c ("PCI: Add DMA alias quirk for Microsemi
Switchtec NTB") for more information on this.
The AMD IOMMU ignores all the PCI aliases except the last one so DMA
transfers from these aliases will be blocked on AMD hardware with the
IOMMU enabled.
To fix this, ensure the DTEs are cloned for every PCI alias. This is
done by copying the DTE data for each alias as well as the IVRS alias
every time it is changed.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acer Aspire A315-41 requires the very same workaround as the existing
quirk for Dell Latitude 5495. Add the new entry for that.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1137799
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- fix a regression in the intel-iommu get_required_mask conversion
(Arvind Sankar)
-----BEGIN PGP SIGNATURE-----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=jbwS
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Fix a regression in the intel-iommu get_required_mask conversion
(Arvind Sankar)"
* tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping:
iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU
We must return a mask covering the full physical RAM when bypassing the
IOMMU mapping. Also, in iommu_need_mapping, we need to check using
dma_direct_get_required_mask to ensure that the device's dma_mask can
cover physical RAM before deciding to bypass IOMMU mapping.
Based on an earlier patch from Christoph Hellwig.
Fixes: 249baa5479 ("dma-mapping: provide a better default ->get_required_mask")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The increase_address_space() function has to check the PM_LEVEL_SIZE()
condition again under the domain->lock to avoid a false trigger of the
WARN_ON_ONCE() and to avoid that the address space is increase more
often than necessary.
Reported-by: Qian Cai <cai@lca.pw>
Fixes: 754265bcab ("iommu/amd: Fix race in increase_address_space()")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Page tables that reside in physical memory beyond the 4 GiB boundary are
currently not working properly. The reason is that when the physical
address for page directory entries is read, it gets truncated at 32 bits
and can cause crashes when passing that address to the DMA API.
Fix this by first casting the PDE value to a dma_addr_t and then using
the page frame number mask for the SMMU instance to mask out the invalid
bits, which are typically used for mapping attributes, etc.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use PTB_ASID instead of SMMU_CONFIG to flush smmu.
PTB_ASID can be accessed from non-secure mode, SMMU_CONFIG cannot be.
Using SMMU_CONFIG could pose a problem when kernel doesn't have secure
mode access enabled from boot.
Signed-off-by: Navneet Kumar <navneetk@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A recent commit added a gfp parameter to amd_iommu_map() to make it
callable from atomic context, but forgot to pass it down to
iommu_map_page() and left GFP_KERNEL there. This caused
sleep-while-atomic warnings and needs to be fixed.
Reported-by: Qian Cai <cai@lca.pw>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 781ca2de89 ("iommu: Add gfp parameter to iommu_ops::map")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU domain resource life is well-defined, managed
by .domain_alloc and .domain_free.
Therefore, domain-specific resources shouldn't be tied to
the device life, but instead to its domain.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
