The old implementation of placing planes on the CRTC while configuring
the planes was naive and relied on the order in which the planes were
configured, enabled, and disabled. The situation where a plane's zpos
was changed on the fly was completely broken. The usual symptoms of
this problem was scrambled display and a flood of sync lost errors,
when a plane was active in two layers at the same time, or a missing
plane, in case when a layer was accidentally disabled.
The rewrite takes a more straight forward approach when HW is
concerned. The plane positioning registers are in the CRTC (or
actually OVR) register space and it is more natural to configure them
in a one go when configuring the CRTC. To do this we need make sure we
have all the planes on the updated CRTCs in the new atomic state. The
untouched planes on CRTCs that need plane position update are added to
the atomic state in tidss_atomic_check().
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227120052.23168-1-jsarha@ti.com
This makes the move_notify callback mandatory when the importer_ops are
provided. Since amdgpu is now migrated it doesn't make much sense
anymore to allow this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/353995/?series=73646&rev=1
Instead use the pin() callback to detect dynamic DMA-buf handling.
Since amdgpu is now migrated it doesn't make much sense to keep
the extra flag.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/353997/?series=73646&rev=1
Implement the importer side of unpinned DMA-buf handling.
v2: update page tables immediately
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/353998/?series=73646&rev=1
This implements the exporter side of unpinned DMA-buf handling.
v2: fix minor coding style issues
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/353999/?series=73646&rev=1
Avoid that we ping/pong the buffers when we stop to pin DMA-buf
exports by using the allowed domains for exported buffers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/353996/?series=73646&rev=1
Pipeline removal of the BOs backing store when no placement is given
during validation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/353994/?series=73646&rev=1
On the exporter side we add optional explicit pinning callbacks. Which are
called when the importer doesn't implement dynamic handling, move notification
or need the DMA-buf locked in place for its use case.
On the importer side we add an optional move_notify callback. This callback is
used by the exporter to inform the importers that their mappings should be
destroyed as soon as possible.
This allows the exporter to provide the mappings without the need to pin
the backing store.
v2: don't try to invalidate mappings when the callback is NULL,
lock the reservation obj while using the attachments,
add helper to set the callback
v3: move flag for invalidation support into the DMA-buf,
use new attach_info structure to set the callback
v4: use importer_priv field instead of mangling exporter priv.
v5: drop invalidation_supported flag
v6: squash together with pin/unpin changes
v7: pin/unpin takes an attachment now
v8: nuke dma_buf_attachment_(map|unmap)_locked,
everything is now handled backward compatible
v9: always cache when export/importer don't agree on dynamic handling
v10: minimal style cleanup
v11: drop automatically re-entry avoidance
v12: rename callback to move_notify
v13: add might_lock in appropriate places
v14: rebase on separated locking change
v15: add EXPERIMENTAL flag, some more code comments
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/353993/?series=73646&rev=1
The plan is use have both shmem and virtual "vram" running
side-by-side in virtio-gpu. It looks like we'll eventually use
struct drm_gem_object as a base class, and we'll need to convert
to shmem and vram objects on the fly. As a first step, add a
virtio_gpu_is_shmem helper. Thanks to kraxel for suggesting this
approach on Gitlab.
Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200227002601.745-3-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
use the drm_fb_helper_remove_conflicting_pci_framebuffer to remove
the framebuffer initialized by fireware/bootloader to avoid resource
conflict.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1582524112-5628-1-git-send-email-tiantao6@hisilicon.com
The omap_dss_device .pre_enable(), .post_disable() and .set_timings()
are not used anymore. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-55-laurent.pinchart@ideasonboard.com
The omapdss_of_find_connected_device() function isn't used anymore,
remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-54-laurent.pinchart@ideasonboard.com
Inline the omapdss_display_get() in its only caller to simplify the
code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-53-laurent.pinchart@ideasonboard.com
The omap_connector implementation is now used for DSI only. Hardcode its
type and drop unused code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-52-laurent.pinchart@ideasonboard.com
In order to integrate with a chain of drm_bridge, the internal SDI
output has to expose its operations through the drm_bridge API.
Register a bridge at initialisation time to do so and remove the
omap_dss_device operations that are now unused.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-51-laurent.pinchart@ideasonboard.com
This makes it easier to quickly locate duplicate includes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-50-laurent.pinchart@ideasonboard.com
In order to integrate with a chain of drm_bridge, the internal DPI
output has to expose its operations through the drm_bridge API.
Register a bridge at initialisation time to do so and remove the
omap_dss_device operations that are now unused.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-49-laurent.pinchart@ideasonboard.com
The dpi_set_pll_clk() and dpi_set_dispc_clk() return various information
through pointer arguments that are never used by the callers. Remove
them to simplify the clock setting API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-48-laurent.pinchart@ideasonboard.com
Group functions based on their purpose and split them in sections to
make the source code easier to navigate.
No functional change is included.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-47-laurent.pinchart@ideasonboard.com
This makes it easier to quickly locate duplicate includes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-46-laurent.pinchart@ideasonboard.com
Now that the omap_dss_device EDID read operation has been removed,
simplify the bridge-based EDID access by merging multiple functions
together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-45-laurent.pinchart@ideasonboard.com
Now that the omap_dss_device EDID read operation has been removed,
simplify the bridge-based EDID access by merging multiple functions
together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-44-laurent.pinchart@ideasonboard.com
Now that the VENC output is driven fully through the drm_bridge API its
omap_dss_device operations are not used anymore. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-43-laurent.pinchart@ideasonboard.com
Now that the HDMI outputs are driven fully through the drm_bridge API
their omap_dss_device operations are not used anymore. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-42-laurent.pinchart@ideasonboard.com
Due to the removal of several omapdrm display drivers, the omapdss HPD,
detected and EDID operations are not used anymore. Remove them and all
related code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-41-laurent.pinchart@ideasonboard.com
The TPD12S015, OPA362 and analog and HDMI connectors are now supported
by DRM bridge drivers, and the omapdrm HDMI and VENC outputs can be
handled through the drm_bridge API. Switch the outputs to drm_bridge by
making the next bridge mandatory and removing the related
omapdrm-specific display drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-40-laurent.pinchart@ideasonboard.com
Use the drm_bridge_connector helper to create a connector for pipelines
that use drm_bridge. This allows splitting connector operations across
multiple bridges when necessary, instead of having the last bridge in
the chain creating the connector and handling all connector operations
internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-39-laurent.pinchart@ideasonboard.com
In order to integrate with a chain of drm_bridge, the internal VENC
encoder has to expose the mode valid, fixup and set, the enable and
disable and the get modes operations through the drm_bridge API.
Register a bridge at initialisation time to do so.
Most of those operations are removed from the omap_dss_device as they
are now called through the drm_bridge API by the DRM atomic helpers. The
only exception is the .get_modes() operation that is still invoked
through the omap_dss_device-based pipeline.
For the time being make the next bridge in the chain optional as the
VENC output is still based on omap_dss_device. The create_connector
argument to the bridge attach function is also ignored for the same
reason. This will be changed later when removing the related
omapdrm-specific display drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-38-laurent.pinchart@ideasonboard.com
The omapdss_hdmi_ops .set_hdmi_mode() and .set_infoframe() operations
operations are not used anymore, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-37-laurent.pinchart@ideasonboard.com
The HDMI4 encoder is transitioning to the drm_bridge API, implement the
last missing operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-36-laurent.pinchart@ideasonboard.com
Move the omap_dss_device .set_timings(), .enable() and .disable()
operations to the drm_bridge functions. As the drm_bridge for the HDMI
encoder is unconditionally registered and attached, those operations
will be called at the appropriate time.
The omapdss device .set_infoframe() and .set_hdmi_mode() operations have
no equivalent in drm_bridge. Thir content is thus moved to the bridge
.enable() operation as the data they store is not needed before the HDMI
encoder gets enabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-35-laurent.pinchart@ideasonboard.com
Move the omap_dss_device .set_timings(), .enable() and .disable()
operations to the drm_bridge functions. As the drm_bridge for the HDMI
encoder is unconditionally registered and attached, those operations
will be called at the appropriate time.
The omapdss device .set_infoframe() and .set_hdmi_mode() operations have
no equivalent in drm_bridge. Thir content is thus moved to the bridge
.enable() operation as the data they store is not needed before the HDMI
encoder gets enabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-34-laurent.pinchart@ideasonboard.com
In order to integrate with a chain of drm_bridge, the internal HDMI5
encoder has to expose the EDID read operation through the drm_bridge
API. Register a bridge at initialisation time to do so.
For the time being make the next bridge in the chain optional as the
HDMI output is still based on omap_dss_device. The create_connector
argument to the bridge attach function is also ignored for the same
reason. This will be changed later when removing the related
omapdrm-specific display drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-33-laurent.pinchart@ideasonboard.com
In order to integrate with a chain of drm_bridge, the internal HDMI4
encoder has to expose the EDID read operation through the drm_bridge
API. Register a bridge at initialisation time to do so.
For the time being make the next bridge in the chain optional as the
HDMI output is still based on omap_dss_device. The create_connector
argument to the bridge attach function is also ignored for the same
reason. This will be changed later when removing the related
omapdrm-specific display drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-32-laurent.pinchart@ideasonboard.com
In preparation of adding DRM bridge support to the hdmi5 encoder code,
rework the EDID read to isolate data read.
The hdmi_read_edid() function is the main entry point. It performs all
initialisation steps required prior to reading the EDID (such as
ensuring the device is powered on), as well as corresponding cleanup
steps afterwards. EDID read itself is handled by hdmi_read_edid_data()
that calls the hdmi5_core_ddc_read() function to read individual blocks.
This new code architecture will allow reusing hdmi_read_edid() and
hdmi5_core_ddc_read() for the drm_bridge EDID read implementation, while
swapping out hdmi_read_edid_data() for the DRM drm_do_get_edid()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-31-laurent.pinchart@ideasonboard.com
In preparation of adding DRM bridge support to the hdmi4 encoder code,
rework the EDID read to isolate data read.
The hdmi_read_edid() function is the main entry point. It performs all
initialisation steps required prior to reading the EDID (such as
ensuring the device is powered on), as well as corresponding cleanup
steps afterwards. EDID read itself is handled by hdmi_read_edid_data()
that calls the hdmi4_core_ddc_read() function to read individual blocks.
This new code architecture will allow reusing hdmi_read_edid() and
hdmi4_core_ddc_read() for the drm_bridge EDID read implementation, while
swapping out hdmi_read_edid_data() for the DRM drm_do_get_edid()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-30-laurent.pinchart@ideasonboard.com
Bring the omapdss-specific .read_edid() operation in sync with the
drm_bridge .get_edid() operation to ease code reuse.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-29-laurent.pinchart@ideasonboard.com
