This patch adds functions to retry TID RDMA READ request. Since TID RDMA
READ request could be retried from any segment boundary, it requires
a number of tracking fields in various structures and those fields
should be reset properly. The qp->s_num_rd_atomic field is reset before
retry and therefore should be incremented for each new or retried
RDMA READ or atomic request.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This commit adds the TID RDMA READ pointers to the receiving opcode
handlers. It also adds TID RDMA READ header sizes to header size table.
A function to print the RHF EFLAGS errors is created so that it can be
shared by both IB and TID RDMA receiving functions.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the functions to receive TID RDMA READ response. The TID
resource information in the KDETH packet header will direct the hardware
to deliver the packet payload to the user buffer automatically and the
software will handle the packet header for the last packet of a segment
as all other packet headers are suppressed by default. The TID entries
will be freed when all packets for a segment have been received. This
patch also adds the functions to handle KDETH eflag errors, including
flow sequence and generation errors, when a TID RDMA READ response
packet is received . The flow sequence error can be recovered by software
checking of the flow sequence and will disappear when the hardware flow
is programmed with a new generation number.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the function to build TID RDMA READ response packet.
The previously received TID resource information will be used to
build the KDETH packet, which will direct the delivery of packet payload
by hardware.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the functions to receive TID RDMA READ request. The TID
resource information will be stored and tracked. Duplicate request
will also be handled properly.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All TID RDMA packets are in KDETH packet format and therefore the
PbcInsertHcrc must be set properly before sending the packet to
hardware. Otherwise, the packets will be dropped by the receiver.
By default, HCRC is not inserted for 9B packets without KDETH, and
this patch adds that back for TID RDMA packets.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the helper functions to build the TID RDMA READ request
on the requester side. The key is to allocate TID resources (TID flow
and TID entries) and send the resource information to the responder side
along with the read request. Since the TID resources are limited, each
TID RDMA READ request has to be split into segments with a default
segment size of 256K. A software flow is allocated to track the data
transaction for each segment. The work request opcode, packet opcode, and
packet formats for TID RDMA READ protocol are also defined in this patch.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the static trace for the flow and TID management
functions to help debugging in the filed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the counter n_tidwait to count the number of times the
TID resource allocator has to wait for TID resources.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
TID entries are used by hfi1 hardware to receive data payload from
incoming packets directly into a user buffer and thus avoid data copying
by software. This patch implements the functions for TID allocation,
freeing, and programming TID RcvArray entries in hardware for kernel
clients. TID entries are managed via lists of TID groups similar to PSM.
Furthermore, to track TID resource allocation for each request, software
flows are also allocated and freed as needed. Since software flows
consume large amount of memory for tracking TID allocation and freeing,
it is generally desirable to allocate them dynamically in the send queue
and only for TID RDMA requests, but pre-allocate them for receive queue
because the send queue could have thousands of entries while the receive
queue has only a limited number of entries.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The hfi1 hardware flow is a hardware flow-control mechanism for a KDETH
data packet that is received on a hfi1 port. It validates the packet by
checking both the generation and sequence. Each QP that uses the TID RDMA
mechanism will allocate a hardware flow from its receiving context for
any incoming KDETH data packets.
This patch implements:
(1) a function to allocate hardware flow
(2) a function to free hardware flow
(3) a function to initialize hardware flow generation for a receiving
context
(4) a wait mechanism if the hardware flow is not available
(4) a function to remove the qp from the wait queue for hardware flow
when the qp is reset or destroyed.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch moves some RC helper functions into a header file so that
they can be called from both RC and TID RDMA functions. In addition,
a common function for rewinding a request is created in rdmavt so that
it can be shared between qib and hfi1 driver.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This series adds the OPFN feature, which is used as the negotiation
protocol by TID RDMA. This adds a totally hidden, in-band negotiation
transfer that happens on the consumer's queue pair but without the
consumer's knowledge. For that reason, things like completions for OPFN
transfers must be filtered out of the completion queue and not sent to
the consumer. This feature does not impact any consumer APIs, but does
impact the driver/driver wire API.
At a high level OPFN enables exchanging parameters between two hosts
using IB compare and swap requests to a special virtual address. The
request uses a reserved IB work request opcode (see patch 3).
* opfn:
IB/hfi1: Add static trace for OPFN
IB/hfi1: Integrate OPFN into RC transactions
IB/hfi1, IB/rdmavt: Allow for extending of QP's s_ack_queue
IB/hfi1: OPFN interface
IB/hfi1: Add OPFN helper functions for TID RDMA feature
IB/hfi1: OPFN support discovery
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the static trace to the OPFN code and moves tid related
static trace code into a new header file.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN parameter negotiation allows a pair of connected RC QPs to exchange
a set of parameters in succession. This negotiation does not commence
till the first ULP request. Because OPFN operations are operations
private to the driver, they do not generate user completions or put the
QP into error when they run out of retries. This patch integrates the
OPFN protocol into the transactions of an RC QP.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The OPFN protocol uses the COMPARE_SWAP request to exchange data
between the requester and the responder and therefore needs to
be stored in the QP's s_ack_queue when the request is received
on the responder side. However, because the user does not know
anything about the OPFN protocol, this extra entry in the
queue cannot be advertised to the user. This patch adds an extra
entry in a QP's s_ack_queue.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN allows a pair of connected RC QPs to exchange a set of parameters
in succession. The parameter exchange itself is done using the IB compare
and swap request with a special virtual address. The request is triggered
using a reserved IB work request opcode. This patch implements the OPFN
interface to initialize, start, process, and reset the OPFN request.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the OPFN helper functions to initialize, encode, decode,
and reset OPFN parameters for the TID RDMA feature.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN (Omni Path Feature Negotiation) support discovery allows a RC QP to
announce that it supports OPFN and also discover if OPFN is supported by
the peer QP. OPFN parameter negotiation is skipped unless OPFN support is
first discovered. OPFN support is announced by claiming what was
the reserved bit in dword 1 of OmniPath modified base transport header
in requests and responses.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Several locations for manipulating sges use an open coded sequence
that is covered by helper functions.
Use the appropriate helper functions.
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sge sizing is done in several places using an open coded method.
This can cause maintenance issues. The open coded method is
encapsulated in a helper routine. The helper was introduced with
commit:
1198fcea8a ("IB/hfi1, rdmavt: Move SGE state helper routines into
rdmavt")
Update all call sites that have the open coded path with the helper
routine.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The function ipoib_intercept_dev_id_attr() is only used in ipoib_main.c
Fixes: f6350da41d ("IB/ipoib: Log sysfs 'dev_id' accesses from userspace")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update the driver to use the new device capability to report 64-bit UAR
PFNs.
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yishai Hadas says:
Enable DEVX asynchronous query commands
This series enables querying a DEVX object in an asynchronous mode.
The userspace application won't block when calling the firmware and it will be
able to get the response back once that it will be ready.
To enable the above functionality:
- DEVX asynchronous command completion FD object was introduced.
- The applicable file operations were implemented to enable using it by
the user application.
- Query asynchronous method was added to the DEVX object, it will call the
firmware asynchronously and manages the response on the given input FD.
- Hot unplug support was added for the FD to work properly upon
unbind/disassociate.
- mlx5 core fence for asynchronous commands was implemented and used to
prevent racing upon unbind/disassociate.
This branch is based on mlx5-next & v5.0-rc2 due to dependencies, from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
* branch 'devx-async':
IB/mlx5: Implement DEVX hot unplug for async command FD
IB/mlx5: Implement the file ops of DEVX async command FD
IB/mlx5: Introduce async DEVX obj query API
IB/mlx5: Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implement DEVX hot unplug for the async command FD.
This is done by managing a list of the inflight commands and wait until
all launched work is completed as part of
devx_hot_unplug_async_cmd_event_file.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implement the file ops of the DEVX async command FD, this enables using
the FD for reading the events and manage other options on the FD.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce async DEVX obj query API to get the command response back to
user space once it's ready without blocking when calling the firmware.
The event's data includes a header with some meta data then the firmware
output command data.
The header includes:
- The input 'wr_id' to let application recognizing the response.
The input FD attribute is used to have the event data ready on.
Downstream patches from this series will implement the file ops to let
application read it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD and its initial implementation.
This object is from type class FD and will be used to read DEVX async
commands completion.
The core layer should allow the driver to set object from type FD in a
safe mode, this option was added with a matching comment in place.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the Kbuild core manipulates header search paths in a crazy
way [1].
To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.
Having whitespaces after -I does not matter since commit 48f6e3cf5b
("kbuild: do not drop -I without parameter").
[1]: https://patchwork.kernel.org/patch/9632347/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The included headers are located in include/target/. I was able to
build these drivers without the extra header search paths.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The open-coded variant missed destroy of SELinux created QP, reuse already
existing ib_detroy_qp() call and use this opportunity to clean
ib_create_qp() from double prints and unclear exit paths.
Reported-by: Parav Pandit <parav@mellanox.com>
Fixes: d291f1a652 ("IB/core: Enforce PKey security on QPs")
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Similar to the core change commit 5f1d43de54 ("IB/core: disable memory
registration of filesystem-dax vmas")
PSM should be prevented from using filesystem DAX pages.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds qpc timer and cqc timer allocation support for hardware
timeout retransmission in kernel space driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds SCC context clear support for DCQCN in kernel space
driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds SCC context allocation and initialization support for
DCQCN in kernel space driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When CONFIG_INFINIBAND_ON_DEMAND_PAGING is not set there is no caller to
ib_alloc_odp_umem() so let's remove it.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A sub-range in ODP implicit MR should take its write permission from the
MR and not be set always to allow.
Fixes: d07d1d70ce ("IB/umem: Update on demand page (ODP) support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no reason for this __GFP_NOFAIL, none of the other routines in
this file use it, and there is an error unwind here. NOFAIL should be
reserved for special cases, not used by network drivers.
Fixes: 6a0b6174d3 ("rdma/cxgb4: Add support for kernel mode SRQ's")
Reported-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch avoids that sparse complains about missing function
declarations.
Fixes: c9990ab39b ("RDMA/umem: Move all the ODP related stuff out of ucontext and into per_mm")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch avoids that sparse complains about missing function
declarations.
Fixes: f27a0d50a4 ("RDMA/umem: Use umem->owning_mm inside ODP")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The macro was just making things harder to follow, and audit, so remove
it and call debugfs_create_file() directly. Also, the macro did not
need to warn about the call failing as no one should ever care about any
debugfs functions failing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As the comment block of nonseekable_open() describes, nonseekable_open()
can never fail. Several places in kernel depend on this behavior.
Therefore, simplify the umad module to depend on this basic kernel
functionality.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Calling pci_enable_atomic_ops_to_root enables AtomicOp requests to pci
root port.
AtomicOp requests will be enabled only if the completer and all
intermediate pci bridges support PCI atomic operations.
This, together with appropriate settings in the NVCONFIG should enable
PCI atomic operations on the device.
PCI atomic operations were first introduced in PCI Express Base Specification
2.1. The Supported operations are Swap (Unconditional Swap), CAS (Compare and
Swap) and FetchAdd (Fetch and Add).
Unlike other atomic operation modes PCI atomic operations gives the user
the option to do atomic operations on local memory, without involving verbs
api, without it compromising the operation's atomicity.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
