Disable fast switch when the opp-tables required for scaling DDR/L3
are populated.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support to parse optional OPP table attached to the cpu node when
the OPP bandwidth values are populated. This allows for scaling of
DDR/L3 bandwidth levels with frequency change.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add SC7180 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'qcom-cpufreq-hw' driver.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add SDM845 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'qcom-cpufreq-hw' driver.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Add support for interconnect bandwidth to the OPP core (Georgi
Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
- Add support for regulator enable/disable to the OPP core (Kamil
Konieczny).
- Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
- Make the tegra186 cpufreq driver set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
- Prevent the ACPI power management from using power resources
with devices where the list of power resources for power state
D0 (full power) is missing (Rafael Wysocki).
- Annotate a hibernation-related function with __init (Christophe
JAILLET).
-----BEGIN PGP SIGNATURE-----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=p5eu
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are operating performance points (OPP) framework updates mostly,
including support for interconnect bandwidth in the OPP core, plus a
few cpufreq changes, including boost support in the CPPC cpufreq
driver, an ACPI device power management fix and a hibernation code
cleanup.
Specifics:
- Add support for interconnect bandwidth to the OPP core (Georgi
Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
- Add support for regulator enable/disable to the OPP core (Kamil
Konieczny).
- Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
- Make the tegra186 cpufreq driver set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
- Prevent the ACPI power management from using power resources with
devices where the list of power resources for power state D0 (full
power) is missing (Rafael Wysocki).
- Annotate a hibernation-related function with __init (Christophe
JAILLET)"
* tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Avoid using power resources if there are none for D0
cpufreq: CPPC: add SW BOOST support
cpufreq: change '.set_boost' to act on one policy
PM: hibernate: Add __init annotation to swsusp_header_init()
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
* pm-cpufreq:
cpufreq: CPPC: add SW BOOST support
cpufreq: change '.set_boost' to act on one policy
cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
* pm-acpi:
ACPI: PM: Avoid using power resources if there are none for D0
* pm-opp:
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
interconnect: Remove unused module exit code from core
interconnect: Disallow interconnect core to be built as a module
interconnect: Add of_icc_get_by_index() helper function
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
To add SW BOOST support for CPPC, we need to get the max frequency of
boost mode and non-boost mode. ACPI spec 6.2 section 8.4.7.1 describes
the following two CPC registers.
"Highest performance is the absolute maximum performance an individual
processor may reach, assuming ideal conditions. This performance level
may not be sustainable for long durations, and may only be achievable if
other platform components are in a specific state; for example, it may
require other processors be in an idle state.
Nominal Performance is the maximum sustained performance level of the
processor, assuming ideal operating conditions. In absence of an
external constraint (power, thermal, etc.) this is the performance level
the platform is expected to be able to maintain continuously. All
processors are expected to be able to sustain their nominal performance
state simultaneously."
To add SW BOOST support for CPPC, we can use Highest Performance as the
max performance in boost mode and Nominal Performance as the max
performance in non-boost mode. If the Highest Performance is greater
than the Nominal Performance, we assume SW BOOST is supported.
The current CPPC driver does not support SW BOOST and use 'Highest
Performance' as the max performance the CPU can achieve. 'Nominal
Performance' is used to convert 'performance' to 'frequency'. That
means, if firmware enable boost and provide a value for Highest
Performance which is greater than Nominal Performance, boost feature is
enabled by default.
Because SW BOOST is disabled by default, so, after this patch, boost
feature is disabled by default even if boost is enabled by firmware.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Macro 'for_each_active_policy()' is defined internally. To avoid some
cpufreq driver needing this macro to iterate over all the policies in
'.set_boost' callback, we redefine '.set_boost' to act on only one
policy and pass the policy as an argument.
'cpufreq_boost_trigger_state()' iterates over all the policies to set
boost for the system.
This is preparation for adding SW BOOST support for CPPC.
To protect Boost enable/disable by sysfs from CPU online/offline,
add 'cpu_hotplug_lock' before calling '.set_boost' for each CPU.
Also move the lock from 'set_boost()' to 'store_cpb()' in
acpi_cpufreq.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These are updates to SoC specific drivers that did not have
another subsystem maintainer tree to go through for some
reason:
- Some bus and memory drivers for the MIPS P5600 based
Baikal-T1 SoC that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3,
Qualcomm MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas
RZ/G1H, and Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC
as a transport.
- Mediatek platforms now use a new driver for their "MMSYS"
hardware block that controls clocks and some other aspects
in behalf of the media and gpu drivers.
- Some Tegra processors have improved power management
support, including getting woken up by the PMIC and cluster
power down during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon,
Mediatek, and Tegra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=44Jc
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
- added support for MIPSr5 and P5600 cores
- converted Loongson PCI driver into a PCI host driver using the generic
PCI framework
- added emulation of CPUCFG command for Loogonson64 cpus
- removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA
- ioremap cleanup
- fix for a race between two threads faulting the same page
- various cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=eAtN
-----END PGP SIGNATURE-----
Merge tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for MIPSr5 and P5600 cores
- converted Loongson PCI driver into a PCI host driver using the
generic PCI framework
- added emulation of CPUCFG command for Loogonson64 cpus
- removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA
- ioremap cleanup
- fix for a race between two threads faulting the same page
- various cleanups and fixes
* tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits)
MIPS: ralink: drop ralink_clk_init for mt7621
MIPS: ralink: bootrom: mark a function as __init to save some memory
MIPS: Loongson64: Reorder CPUCFG model match arms
MIPS: Expose Loongson CPUCFG availability via HWCAP
MIPS: Loongson64: Guard against future cores without CPUCFG
MIPS: Fix build warning about "PTR_STR" redefinition
MIPS: Loongson64: Remove not used pci.c
MIPS: Loongson64: Define PCI_IOBASE
MIPS: CPU_LOONGSON2EF need software to maintain cache consistency
MIPS: DTS: Fix build errors used with various configs
MIPS: Loongson64: select NO_EXCEPT_FILL
MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()
MIPS: mm: add page valid judgement in function pte_modify
mm/memory.c: Add memory read privilege on page fault handling
mm/memory.c: Update local TLB if PTE entry exists
MIPS: Do not flush tlb page when updating PTE entry
MIPS: ingenic: Default to a generic board
MIPS: ingenic: Add support for GCW Zero prototype
MIPS: ingenic: DTS: Add memory info of GCW Zero
MIPS: Loongson64: Switch to generic PCI driver
...
Pull ARM cpufreq updates for v5.8-rc1 (part 2) from Viresh Kumar:
"This contains a single patch to enable CPUFREQ_NEED_INITIAL_FREQ_CHECK
flag for tegra driver."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
Pull operating performance points (OPP) framework changes for v5.8
from Viresh Kumar:
"This contains:
- support for interconnect bandwidth in the OPP core (Georgi Djakov,
Saravana Kannan, Sibi Sankar, Viresh Kumar).
- support for regulator enable/disable (Kamil Konieczny).
This is based on three patches from the interconnect tree which
shall get merged via Greg's tree."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
interconnect: Remove unused module exit code from core
interconnect: Disallow interconnect core to be built as a module
interconnect: Add of_icc_get_by_index() helper function
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
In addition to clocks and regulators, some devices can scale the bandwidth
of their on-chip interconnect - for example between CPU and DDR memory. Add
support for that, so that platforms which support it can make use of it.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[ Viresh: Reused dev_pm_opp_of_find_icc_paths(). Also drop the depends
on from Kconfig. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
fixup! cpufreq: dt: Add support for interconnect bandwidth scaling
This change move Tegra20 and Tegra30 to the generic DT CPU frequency
scaling driver.
-----BEGIN PGP SIGNATURE-----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=ru90
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.8-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
cpufreq: Changes for v5.8-rc1
This change move Tegra20 and Tegra30 to the generic DT CPU frequency
scaling driver.
* tag 'tegra-for-5.8-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)
Link: https://lore.kernel.org/r/20200515145311.1580134-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After commit 18c49926c4 ("cpufreq: Add QoS requests for userspace
constraints") the return value of freq_qos_update_request(), that can
be 1, passed by cpufreq_boost_set_sw() to its caller sometimes
confuses the latter, which only expects to see 0 or negative error
codes, so notice that cpufreq_boost_set_sw() can return an error code
(which should not be -EINVAL for that matter) as soon as the first
policy without a frequency table is found (because either all policies
have a frequency table or none of them have it) and rework it to meet
its caller's expectations.
Fixes: 18c49926c4 ("cpufreq: Add QoS requests for userspace constraints")
Reported-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The driver doesn't provide ->get() method to read current frequency and
the frequency is set to 0 at initialization which makes the driver fail
at initialization time.
Set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag for the driver, so the
cpufreq core checks for the unlisted frequency and sets the CPU to a
valid frequency from the frequency table.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
[ Viresh: Massaged change log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull ARM cpufreq updates for v5.8 from Viresh Kumar:
"- Build OMAP cpufreq driver by default for ARCH_OMAP2PLUS platform
(Anders Roxell).
- Fix compatible bindings for qcom cpufreq driver (Ansuel Smith).
- Update qoriq cpufreq driver to automatically loaded when built as
module and related changes (Mian Yousaf Kaukab and Geert
Uytterhoeven).
- Add support for r8a7742 to cpufreq-dt platform driver (Lad
Prabhakar).
- Add support for i.MX7ULP to imx cpufreq driver (Peng Fan)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qoriq: Add platform dependencies
clk: qoriq: add cpufreq platform device
cpufreq: qoriq: convert to a platform driver
cpufreq: qcom: fix wrong compatible binding
cpufreq: imx-cpufreq-dt: support i.MX7ULP
cpufreq: dt: Add support for r8a7742
cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklist
cpufreq: omap: Build driver by default for ARCH_OMAP2PLUS
The Freescale QorIQ clock controller is only present on Freescale E500MC
and Layerscape SoCs. Add platform dependencies to the QORIQ_CPUFREQ
config symbol, to avoid asking the user about it when configuring a
kernel without E500MC or Layerscape support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The driver has to be manually loaded if it is built as a module. It
is neither exporting MODULE_DEVICE_TABLE nor MODULE_ALIAS. Moreover,
no platform-device is created (and thus no uevent is sent) for the
clockgen nodes it depends on.
Convert the module to a platform driver with its own alias. Moreover,
drop whitelisted SOCs. Platform device will be created only for the
compatible platforms.
Reviewed-by: Yuantian Tang <andy.tang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Re-parenting to intermediate clock is supported now by the clock driver
and thus there is no need in a customized CPUFreq driver, all that code
is common for both Tegra20 and Tegra30. The available CPU freqs are now
specified in device-tree in a form of OPPs, all users should update their
device-trees.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Binding in Documentation is still "operating-points-v2-kryo-cpu".
Restore the old binding to fix the compatibility problem.
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
i.MX7ULP's ARM core clock design is totally different compared
with i.MX7D/8M SoCs which supported by imx-cpufreq-dt. It needs
get_intermediate and target_intermedate to configure clk MUX ready,
before let OPP configure ARM core clk.
|---FIRC
|------RUN---...---SCS(MUX2) --------|
ARM --(MUX1) |---SPLL_PFD0(CLK_SET_RATE_GATE)
|------HSRUN--...--HSRUN_SCS(MUX3)---|
|---SRIC
FIRC is step clk, SPLL_PFD0 is the normal clk driving ARM core.
MUX2 and MUX3 share same inputs. So if MUX2/MUX3 both sources from
SPLL_PFD0, both MUXes will lose input when configure SPLL_PFD0.
So the target_intermediate will configure MUX2/MUX3 to FIRC, to avoid
ARM core lose clk when configure SPLL_PFD0.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When building the mult_v7_defconfig, ARM_TI_CPUFREQ doesn't get enabled
evenwhen ARCH_OMAP(3|4) is selected. Build ARM_TI_CPUFREQ by default for
ARCH_OMAP2PLUS.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Make a note of the first time we discover the turbo mode has been
disabled by the BIOS, as otherwise we complain every time we try to
update the mode.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After recent changes allowing scale-invariant utilization to be
used on x86, the schedutil governor on top of intel_pstate in the
passive mode should be on par with (or better than) the active mode
"powersave" algorithm of intel_pstate on systems in which
hardware-managed P-states (HWP) are not used, so it should not be
necessary to use the internal scaling algorithm in those cases.
Accordingly, modify intel_pstate to start in the passive mode by
default if the processor at hand does not support HWP of if the driver
is requested to avoid using HWP through the kernel command line.
Among other things, that will allow utilization clamps and the
support for RT/DL tasks in the schedutil governor to be utilized on
systems in which intel_pstate is used.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As platforms are moving to COMMON_CLK in general, loongson2ef
stuck out as something that has a private implementation but
does not actually use it except for setting the frequency of
the CPU itself from the loongson2_cpufreq driver.
Change that driver to call the register setting function directly
and remove the rest of the stub implementation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- Fix corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl6LN9kSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxqj0P/3Uh16YIKOUeXosqtptJJiWgZoWu82aR
H2uzc9hCV6k/tnSG/Y3ZGgI4dUZGcJ94By80XoWceZ97CC1YuBHpF/dHSupTCcvt
tBEP9H2qbSLi9d2PhlEUJ0B6PBpWEjCzOb519Tzj4sd67FGhsKeihXl+WXdgaaKZ
hpdj+tBkQ6Dxb7CXVw/mUpWlg/nmF+yRqpK5By+V0WMOlQtg4Ecb3lMqaJPr7b4F
W/I5m4PE9QG+VetSSXoe7CKfLo2fsDtyHH6ioTJ9xklcOflIblZ3MYf3sKgOuuny
m/6Zm71HmQwWRkjA/V+C/eTr0VX2TuMUALfA8i+uZBo//I58TTJq9oqosu8eao2P
5MR79Vwa+eqtYRgpHCTM4JO1iyKiE+FTfVAPOS4hHOKjqY9BUj0YtWHxk8abdzQd
owv9DjEtGKcipAnCKtWDIS9ikZ5TOsYiGgWyJQnoonpFY+0s3DwtRdi+gBLJliSj
5j7sRv9wJrJRFZ7tRMHHAqoQkSYqf4YdBuRBG7F/M44anveORBJNaTbPgm30qbUP
FXD9hTJn/4Q2nmBSzqvEv0+TJrWoCyKduzr5uNsR0eyg48w9mrlUDDkW7dOMb3DU
WV6QGNomMuKIY4DHKCo3/k21NmzW2JN7zhUrErCnl0bXjV2AM71Cb2xjUD1eNOqV
9LxPDvAmZoGt
=QFDr
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"Additional power management updates.
These fix a corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source, add a kernel
command line option to set pm_debug_messages via the kernel command
line, add a document desctibing system-wide suspend and resume code
flows, modify cpufreq Kconfig to choose schedutil as the preferred
governor by default in a couple of cases and do some assorted
cleanups.
Specifics:
- Fix corner-case suspend-to-idle wakeup issue on systems where the
ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui)"
* tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
ACPI: PM: Add acpi_[un]register_wakeup_handler()
Documentation: PM: sleep: Document system-wide suspend code flows
cpufreq: Select schedutil when using big.LITTLE
PM: sleep: Add pm_debug_messages kernel command line option
PM: sleep: core: Drop racy and redundant checks from device_prepare()
PM: hibernate: Propagate the return value of hibernation_restore()
cpufreq: intel_pstate: Select schedutil as the default governor
* pm-sleep:
Documentation: PM: sleep: Document system-wide suspend code flows
PM: sleep: Add pm_debug_messages kernel command line option
PM: sleep: core: Drop racy and redundant checks from device_prepare()
PM: hibernate: Propagate the return value of hibernation_restore()
* pm-cpufreq:
cpufreq: Select schedutil when using big.LITTLE
cpufreq: intel_pstate: Select schedutil as the default governor
- A large series from Nick for 64-bit to further rework our exception vectors,
and rewrite portions of the syscall entry/exit and interrupt return in C. The
result is much easier to follow code that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had become badly
intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings from the
workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and update the
status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to:
Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl6JypATHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgOTyD/0U90tXb3VXlQcc4OFIb8vWIj76k4Zn
ZSZ7RyOuvb5pCISBZjSK79XkR9eMHT77qagX4V41q64k4yQl8nbgLeVnwL76hLLc
IJCs23f4nsO0uqX/MhSCc5dfOOOS2i8V+OQYtsYWsH5QaG95v0cHIqVaHHMlfQxu
507GO/W5W6KTd4x008b5unQOuE51zMKlKvqEJXkT59obQFpaa2S5Wn7OzhsnarCH
YSRNxaC7vtgBKLA9wUnFh8UUbh0FbOwXBCaq4OhHMhgRihdteVBCzlcR/6c+IRbt
EoZxKzfQ0hI1z5f++kJNaRXMtUbSpM8D1HdKKHgiWjpdBSD0eu2X106KQT2R2ZOF
qhX8xPLWNzdBglA6L43AaZUu+4ayd3QrrJIkjDv/K1rCHZjfGOzSQfoZgTEBNLFA
tC0crhEfw8m98e4EwhCtekGQxdczRdLS9YvtC/h6mU2xkpA35yNSwB1/iuVQdkYD
XyrEqImAQ1PJla7NL0hxSy5ZxrBtMeKT4WZZ0BNgKXryemldg8Tuv3AEyach3BHz
eU0pIwpbnPm1JAPyrpDQ1yEf7QsD77gTPfEvilEci60R9DhvIMGAY+pt0qfME3yX
wOLp2yVBEXlRmvHk/y/+r+m4aCsmwSrikbWwmLLwAAA6JehtzFOWxTEfNpACP23V
mZyyZznsHIIE3Q==
=ARdm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
When we are using a system with big.LITTLE HMP
configuration, we need to use EAS to schedule the
system.
As can be seen from kernel/sched/topology.c:
"EAS can be used on a root domain if it meets all the following conditions:
1. an Energy Model (EM) is available;
2. the SD_ASYM_CPUCAPACITY flag is set in the sched_domain hierarchy.
3. no SMT is detected.
4. the EM complexity is low enough to keep scheduling overheads low;
5. schedutil is driving the frequency of all CPUs of the rd;"
This means that at the very least, schedutil needs to be
available as a scheduling policy for EAS to work on these
systems. Make this explicit by defaulting to the schedutil
governor if BIG_LITTLE is selected.
Currently users of the TC2 board (like me) has to figure these
dependencies out themselves and it is not helpful.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- In-kernel Pointer Authentication support (previously only offered to
user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU
init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm()
converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour.
-----BEGIN PGP SIGNATURE-----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=LJVX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Various NUMA scheduling updates: harmonize the load-balancer and
NUMA placement logic to not work against each other. The intended
result is better locality, better utilization and fewer migrations.
- Introduce Thermal Pressure tracking and optimizations, to improve
task placement on thermally overloaded systems.
- Implement frequency invariant scheduler accounting on (some) x86
CPUs. This is done by observing and sampling the 'recent' CPU
frequency average at ~tick boundaries. The CPU provides this data
via the APERF/MPERF MSRs. This hopefully makes our capacity
estimates more precise and keeps tasks on the same CPU better even
if it might seem overloaded at a lower momentary frequency. (As
usual, turbo mode is a complication that we resolve by observing
the maximum frequency and renormalizing to it.)
- Add asymmetric CPU capacity wakeup scan to improve capacity
utilization on asymmetric topologies. (big.LITTLE systems)
- PSI fixes and optimizations.
- RT scheduling capacity awareness fixes & improvements.
- Optimize the CONFIG_RT_GROUP_SCHED constraints code.
- Misc fixes, cleanups and optimizations - see the changelog for
details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
threads: Update PID limit comment according to futex UAPI change
sched/fair: Fix condition of avg_load calculation
sched/rt: cpupri_find: Trigger a full search as fallback
kthread: Do not preempt current task if it is going to call schedule()
sched/fair: Improve spreading of utilization
sched: Avoid scale real weight down to zero
psi: Move PF_MEMSTALL out of task->flags
MAINTAINERS: Add maintenance information for psi
psi: Optimize switching tasks inside shared cgroups
psi: Fix cpu.pressure for cpu.max and competing cgroups
sched/core: Distribute tasks within affinity masks
sched/fair: Fix enqueue_task_fair warning
thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
sched/rt: Remove unnecessary push for unfit tasks
sched/rt: Allow pulling unfitting task
sched/rt: Optimize cpupri_find() on non-heterogenous systems
sched/rt: Re-instate old behavior in select_task_rq_rt()
sched/rt: cpupri_find: Implement fallback mechanism for !fit case
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
sched/fair: Fix runnable_avg for throttled cfs
...
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
Modify cpufreq Kconfig to select schedutil as the default governor
if the intel_pstate driver has been selected and SMP support is
enabled (because schedutil depends on SMP).
Also select schedutil as well as the performance governor from the
intel_pstate Kconfig section to ensure the equivalence of the passive
and active mode governor configuration options.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The initial policy value set by intel_pstate_cpu_init() depends on
whether or not CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is set, but
that is not necessary, because the core will set the policy to
"performance" in cpufreq_init_policy() if the default governor is
"performance" anyway.
Accordingly, change intel_pstate_cpu_init() to always set policy
to CPUFREQ_POLICY_POWERSAVE initially to provide a valid fallback
value to cpufreq_init_policy() in case the default cpufreq governor
is neither "powersave" nor "performance".
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The feature flag hwp_support_ids are supposed to match on is
X86_FEATURE_HWP, not X86_FEATURE_APERFMPERF. Fix it.
[ bp: Write commit message. ]
Fixes: b11d77fa30 ("cpufreq: Convert to new X86 CPU match macros")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200324060124.GC11705@shao2-debian
The patch avoids allocating cpufreq_policy on stack hence fixing frame
size overflow in 'powernv_cpufreq_work_fn'
Fixes: 227942809b ("cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling")
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200316135743.57735-1-psampat@linux.ibm.com
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
Get rid the of most local macro wrappers for consistency. The ones which
make sense for readability are renamed to X86_MATCH*.
In the centrino driver this also removes the two extra duplicates of family
6 model 13 which have no value at all.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/87eetheu88.fsf@nanos.tec.linutronix.de
There is no reason that this gunk is in a generic header file. The wildcard
defines need to stay as they are required by file2alias.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131508.736205164@linutronix.de
Pull ARM cpufreq drivers updates for v5.7 from Viresh Kumar:
"This pull request contains:
- update to imx cpufreq drivers to improve their support (Anson Huang,
Christoph Niedermaier, and Peng Fan).
- Update to qcom cpufreq to support other krait based SoCs (Ansuel
Smith).
- Update ti cpufreq driver to support OPP_PLUS (Lokesh Vutla).
- Update cpufreq-dt driver to allow platfoem specific intermediate
callbacks (Peng Fan)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom: Add support for krait based socs
cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
cpufreq: dt: Allow platform specific intermediate callbacks
cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location
cpufreq: imx6q: read OCOTP through nvmem for imx6q
cpufreq: imx6q: fix error handling
cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check
cpufreq: ti-cpufreq: Add support for OPP_PLUS
cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
that has KRAIT processors the voltage/current value of each OPP
varies based on the silicon variant in use.
The required OPP related data is determined based on
the efuse value. This is similar to the existing code for
kryo cores. So adding support for krait cores here.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
