Benefit from previously introduced transaction item queue infrastructure
and remove rocker specific transaction memory management.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There will be needed to have switchdev_trans available down in the call
chain, so propagate it instead of trans phase enum. This enum will be
removed anyway. Also, use prepare/commit phase check helpers to get
information about current phase of transaction.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add helpers which should be used int attr_set/obj_add switchdev ops to
check the phase of transaction.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before it disappears completely, move transaction phase enum under
transaction structure and make attr/obj structures a bit cleaner.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now, the memory allocation in prepare/commit state is done separatelly
in each driver (rocker). Introduce the similar mechanism in generic
switchdev code, in form of queue. That can be used not only for memory
allocations, but also for different items. Abort item destruction
is handled as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is temporary, name "trans" will be used for something else and
"trans_ph" will eventually disappear.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-09-23
This series contains updates to ixgbe only.
Mark provides all the changes in this series, first clears the destination
location for I2C data initially so that the received data will not be
corrupted by previous attempts. Then reduced the pauses/delays in the
PHY detection when no SFP is present by reducing the number of retires,
once an SFP is detected, the "normal" number of retries in PHY detection
will be used. Added support for X55EM_x SFP+ dual-speed, and fixed 1G and
10G link stability for X550EM_x by configuring the CS4227 correctly by
moving code to ixgbe_setup_mac_link_sfp_x550em(). Added functionality to
reset CS4227, since on some platforms the CS4227 does not initialize
properly. Next reduces the SFP polling rate, due to when an SFP is not
present, the I2C timeouts that result are very costly. So prevent the
SFP polling from being done more than once every two seconds. Added
support for I2C bus MUX. Fixed the setting of RDRXCTL register which
should fall through X540 and 82599, not 82598. In addition, added small
packet padding support in X550 by setting RDRXCTL.PSP when the driver is
in SRIOV mode. Fixed a known hardware issue where the PCI transactions
pending bit sticks high when there are pending transactions, so
workaround the issue by wait and then continue with our reset flow.
Added a new device ID for X550EM device with SFPs. Provided a fix with
the DCA setup, which was suggested by Alex Duyck <aduyck@mirantis.com>,
by making it so that we always set the relaxed ordering bits related to
the DCA registers even if DCA is not enbaled. Then moves the
configuration out of the ixgbe_down() and into ixgbe_configure() before
enabling the transmit and receive rings. This ensures that DCA is
configured correctly before starting the processing of packets.
Fixed VM-to-VM loopback mode which requires that FCRTH be set, but
the datasheets did not specify what the value should be. It has now
been determined that the correct value should be RXPBSIZE - (24*1024).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal suggested to move sk_txhash init into tcp_create_openreq_child(),
called both from IPv4 and IPv6.
This opportunity was missed in commit 58d607d3e5 ("tcp: provide
skb->hash to synack packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use of_property_read_u32 instead of of_get_property with return value
checks and endianness conversion.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use of_property_read_u32 to read the "clock-frequency" property instead
of using of_get_property with return value checks.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 12fd84f438 ("ipv6: Remove unused neigh argument for
icmp6_dst_alloc() and its callers."), the neigh parameter of ndisc_send_na
and ndisc_send_ns is unused.
CC: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The genl_notify function has too many arguments for no real reason - all
callers use genl_info to get them anyway. Just pass the genl_info down to
genl_notify.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the addition of X550em_x SFP+ support, the driver is now
functionally equivalent to what will be the 4.2.1 driver when
released, so change the version to match.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The X540 thermal interrupt (IXGBE_EIMS_TS) is not an SDP, so it
doesn't need to be enabled in ixgbe_setup_gpie(). In fact the
value is simply not for the GPIE register at all.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The 82599 and X540 datasheets require that FCRTH be "set" for Tx
switching (VM-to-VM loopback) but it did not previously specify what
the value should be set to. It has now been determined that
the correct value is RXPBSIZE - (24*1024).
This setting is also required for later devices.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
A logic error here results in the adapter_stopped flag only being
cleared when ixgbe_setup_fc returns an error. Correct the logic.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This change does two things. First, it makes it so that we always
set the relaxed ordering bits related to the DCA registers even if
DCA is not enabled. Second, it moves the configuration out of the
ixgbe_down function and into the ixgbe_configure function before
enabling the Rx and Tx rings. This ensures that DCA is configured
correctly before starting to process packets.
Thanks to Alex Duyck for this fix.
CC: Alex Duyck <aduyck@mirantis.com>
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add new device ID for X550EM device with SFPs.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch skips the PCI transactions pending check in
ixgbe_disable_pcie_master. This is done to addresses a known HW
issue where the PCI transactions pending bit sticks high when there
are pending transactions. HW engineering instructed to workaround
this issue by wait and then continue with our reset flow.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch sets RDRXCTL.PSP when the driver is in SRIOV mode which
enables padding of small packets.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Setting the X550* RDRXCTL register should fall through into X540
and 82599, not 82598.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The timeout path is supposed to release the semaphore, so do that.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Take control of an I2C mux that selects which SFP is attached to
the I2C bus. The control of the mux is captured in the taking and
releasing of the related semaphore. Because only port 1 can control
the mux, port 1 always leaves the mux set to select port 0.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Reduce the frequency of polling for SFP modules. Because the
service task sometimes runs at high rates, we can poll for
SFPs too often. When an SFP is not present, the I2C timeouts
that result are very costly. So, prevent SFP polling from
being done more than once every two seconds. To reduce latency,
the poll time is cleared in a couple of cases to permit the
next service task execution to poll the SFP module.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since SFP+ can be used with some X550 devices, permit them to be
detected.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
On some hardware platforms, the CS4227 does not initialize properly.
Detect those cases and reset it appropriately.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Configures the CS4227 correctly for both 1G and 10G operation,
by moving the code to ixgbe_setup_mac_link_sfp_x550em(). It
needs to be in this function because we need both the module
type and the speed, and this is the only function in the init
flow that knows the speed. In contrast,
ixgbe_setup_sfp_modules_X550em() does not know the speed, so we
can't do anything useful here. This is a fundamental difference
from the previous flow, and is due to the way the CS4227 is
implemented.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch adds X550EM_x SFP+ dual-speed support. 82599 fiber link
code was moved from ixgbe_82599.c to ixgbe_common.c for use by
X550EM. SFP MAC link code is added to x550EM.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Reduce the number of retries during PHY detection. This reduces
pauses when no SFP is present. Once an SFP is detected, the normal
retry count will be used.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Clear the destination location for I2C data initially so that
the received data will not be affected by previous attempts.
This could have returned wrong data in certain retry sequences.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In case the DaVinci Emac is directly connected to a
non-mdio PHY/device, it should be possible to provide
a fixed link configuration in the DT.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-09-22
This series contains updates to e1000, e1000e, igbvf, ixgbe, ixgbevf and
fm10k.
Jacob provides several updates for fm10k, which cleans up comments and
most notably a fix for a corner case issue with the PF/VF mailbox code.
The issue being fm10k_mbx_reset_work clears various states about the
mailbox, but does not clear the Tx FIFO head/tail pointers. We also
are not able to simply clear these pointers, as we would drop
untransmitted messages without error. Also adds support for extra debug
statistics, which provides the ability to see what the PF thinks the
VF mailboxes look like.
Don adds support for SFP+ in X550 and support for SCTP flow director
filters SCTP mask.
Francois Romieu dusts off the e1000 driver and removes some dead calls
to e1000_init_eeprom_params().
Toshiaki Makita provides three patches to enable TSO for stacked VLAN's
on e1000e, igbvf and ixgbevf.
Mark provides the first of several ixgbe updates. First updates the
driver to accept SFP not present error for all devices, since an SFP
can still be inserted. Adds support for SFP insertion interrupt on
X550EM devices with SPFs. Adds I2C combined operations on X550EM
(not X550) devices. Moved the setting of lan_id to before any I2C
eeprom access. Lastly, set the bit bang mode in the hardware when
performing bit banding I2C operations on X550.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Feldman says:
====================
bridge: don't age out externally added FDB entries
v3: Per davem review: add del_timer_sync on rocker port remove.
v2: Per Jiri review comment: add BR_DEFAULT_AGEING_TIME to defines
Siva originally proposed skipping externally added FDB entries in the bridge's
FDB garbage collection func, and moving the ageing of externally added entries
to the port driver/device. This broke rocker, since rocker didn't have a
hardware (or software) mechanism for ageing out its learned FDB entries.
This patchset reintroduces Siva's bridge driver patch to skip externally added
entries and adds support in rocker so rocker can age out its own entries.
Rocker does this using a software timer similar to the bridge's FDB garbage
collection timer. Other switchdev devices/drivers can use this software timer
method or program the device to nofity aged-out entries to the driver.
Updated switchdev.txt documentation to reflect current state-of-the-art. This
removes one more XXX todo comment in switchdev.txt.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Siva Mannem <siva.mannem.lnx@gmail.com>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Premkumar Jonnala <pjonnala@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a timer to each rocker switch to do FDB entry cleanup by ageing out
expired entries. The timer scheduling algo is copied from the bridge
driver, for the most part, to keep the firing of the timer to a minimum.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow-up patcheset will allow user to change ageing_time, but for now
just hard-code it to a fixed value (the same value used as the default
for the bridge driver).
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'll need more info from rocker_port than just pport when we age out fdb
entries, so store rocker_port rather than pport in each fdb entry.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
The entry is touched once when created, and touched again for each update.
The touched time is used to calculate FDB entry age.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
Minor cls_bpf updates
Some minor updates resp. follow-ups on cls_bpf, please see
individual patches for details. Will follow with the iproute2
patch after this series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal suggested to further limit the currently allowed subset of opcodes
that may be used by a direct action return code as the intention is not
to replace the full action engine, but rather to have a minimal set that
can be used in the fast-path on things like ingress for some features
that cls_bpf supports.
Classifiers can, of course, still be chained together that have direct
action mode with those that have a full exec pass. For more complex
scenarios that go beyond this minimal set here, the full tcf_exts_exec()
path must be used.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The binding to a particular classid was so far always mandatory for
cls_bpf, but it doesn't need to be. Therefore, lift this restriction
as similarly done in other classifiers.
Only a couple of qdiscs make use of class from the tcf_result, others
don't strictly care, so let the user choose his needs (those that read
out class can handle situations where it could be NULL).
An explicit check for tcf_unbind_filter() is also not needed here, as
the previous r->class was 0, so the xchg() will return that and
therefore a callback to the qdisc's unbind_tcf() is skipped.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 43388da42a49 ("cls_bpf: introduce integrated actions") we
have added TCA_BPF_FLAGS. We can also retrieve this information from
the prog, dump it back to user space as well. It's useful in tc when
displaying/dumping filter info.
Also, remove tp from cls_bpf_prog_from_efd(), came in as a conflict
from a rebase and it's unused here (later work may add it along with
a real user).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series cleans up the code in drivers/net/arcnet
and include/uapi/linux/if_arcnet.h . It doesn't change
the runtime behaviour of the code. Its only purpose
is to improve the code maintenance and readability.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QEr5
-----END PGP SIGNATURE-----
Merge tag 'arcnet-cleanup-v4.3-rc2' of git://git.pengutronix.de/git/mgr/linux
Michael Grzeschik says:
====================
ARCNET: refactoring and cleanup
This series cleans up the code in drivers/net/arcnet
and include/uapi/linux/if_arcnet.h . It doesn't change
the runtime behaviour of the code. Its only purpose
is to improve the code maintenance and readability.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly as already the case in bpf_redirect()/skb_do_redirect()
pair, let the stack deal with devs that are !IFF_UP.
dev_forward_skb() as well as dev_queue_xmit() will free the skb
and increment drop counter internally in such cases, so we can
spare the condition in bpf_clone_redirect().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rt6_info_hash_nhsfn replace the custom hashing over flowi6 that is
using xor with a call to common function get_hash_from_flowi6.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch cleans the capmode protocol module. It removes the obsolete
function arcnet_cap_init and replaces printk with pr_info.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
