AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
796,847 Commits 1 Branch 0 Tags 2 GiB
aa5c4f175b
Commit Graph

796847 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Huazhong Tan
aa5c4f175b net: hns3: add reset handling for VF when doing PF reset 
When PF performs a function reset, the hardware will reset both PF
and all the VF belong to this PF. Hence, both PF's driver and VF's
driver need to perform corresponding reset operations.

Before PF driver asserting function reset to hardware, it firstly
set up VF's hardware reset status, and inform the VF driver with
HNAE3_VF_PF_FUNC_RESET, then VF driver sets this reset type to
reset_pending and shechule reset task to stop IO and waits for the
hardware reset status to clear. When PF driver has reinitialized the
hardware and is ready to process mailbox from VF, PF driver clears
VF's hardware reset status for VF to continue its reset process.

Also, this patch uses readl_poll_timeout to simplify the hardware reset
status waitting.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-09 16:47:34 -08:00
Huazhong Tan
dea846e85a net: hns3: adjust VF's reset process 
Currently when VF need to reset itself, it will send a cmd to PF,
after receiving the VF reset requset, PF sends a cmd to inform
VF to enter the reset process and send a cmd to firmware to do the
actual reset for the VF, it is possible that firmware has resetted
the VF, but VF has not entered the reset process, which may cause
IO not stopped problem when firmware is resetting VF.

This patch fixes it by adjusting the VF reset process, when VF
need to reset itself, it will enter the reset process first, and
it will tell the PF to send cmd to firmware to reset itself.

Add member reset_pending to struct hclgevf_dev, which indicates that
there is reset event need to be processed by the VF's reset task, and
the VF's reset task chooses the highest-level one and clears other
low-level one when it processes reset_pending.

hclge_inform_reset_assert_to_vf function is unused now, but it will
be used to support the PF reset with VF working, so declare it in
the header file.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-09 16:47:34 -08:00
Huazhong Tan
9c6f708577 net: hns3: add reset_hdev to reinit the hdev in VF's reset process 
When doing reset, the reset handling function only need to
reinitialize hardware, it makes sense to add a function to
do that job. Also the error handling of hclgevf_init_hdev is
different when it is used in reset process.

This patch adds reset_hdev to reinitialize hardware when resetting.
Also, this patch removes the hclgevf_dev_ongoing_full_reset because
it is unused now.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-09 16:47:34 -08:00
Arjun Vynipadath
40c4b1e9b6 cxgb4vf: free mac_hlist properly 
The locally maintained list for tracking hash mac table was
not freed during driver remove.

Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-09 15:18:48 -08:00
Arjun Vynipadath
24357e06ba cxgb4vf: fix memleak in mac_hlist initialization 
mac_hlist was initialized during adapter_up, which will be called
every time a vf device is first brought up, or every time when device
is brought up again after bringing all devices down. This means our
state of previous list is lost, causing a memleak if entries are
present in the list. To fix that, move list init to the condition
that performs initial one time adapter setup.

Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-09 15:18:22 -08:00
Arjun Vynipadath
2a8d84bf51 cxgb4: free mac_hlist properly 
The locally maintained list for tracking hash mac table was
not freed during driver remove.

Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-09 15:18:00 -08:00
Li RongQing
e6e8869aed net: tcp: remove BUG_ON from tcp_v4_err 
if skb is NULL pointer, and the following access of skb's
skb_mstamp_ns will trigger panic, which is same as BUG_ON

Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-09 15:16:29 -08:00
Jacob Wen
307f39b021 xen/netfront: remove unnecessary wmb 
RING_PUSH_REQUESTS_AND_CHECK_NOTIFY is already able to make sure backend sees
requests before req_prod is updated.

Signed-off-by: Jacob Wen <jian.w.wen@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-09 15:15:17 -08:00
David S. Miller
db8ba1e8c3 Merge branch 'nfp-abm-move-code-and-improve-parameter-validation' 
Jakub Kicinski says:

====================
nfp: abm: move code and improve parameter validation

This set starts by separating Qdisc handling code into a new file.
Next two patches allow early access to TLV-based capabilities during
probe, previously the capabilities were parsed just before netdevs
were registered, but its cleaner to do some basic validation earlier
and avoid cleanup work.

Next three patches improve RED's parameter validation.  First we provide
a more precise message about why offload failed (and move the parameter
validation to a helper).  Next we make sure we don't set the top bit
in the 32 bit max RED threshold value.  Because FW is treating the value
as signed it reportedly causes slow downs (unnecessary queuing and
marking) when top bit is set with recent firmwares.  Last (and perhaps
least importantly) we offload the harddrop parameter of the Qdisc.
We don't plan to offload harddrop RED, but it seems prudent to make
sure user didn't set that flag as device behaviour would have differed.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:48:01 -08:00
Jakub Kicinski
6e5a716f42 nfp: abm: refuse RED offload with harddrop set 
RED Qdisc will now inform the drivers about the state of the harddrop
flag.  Refuse to offload in case harddrop is set.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:48:01 -08:00
Jakub Kicinski
190852a55e net: sched: red: inform offloads about harddrop setting 
To mirror software behaviour on offload more precisely inform
the drivers about the state of the harddrop flag.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:48:01 -08:00
Jakub Kicinski
cae5f48e32 nfp: abm: don't set negative threshold 
Turns out the threshold value is used in signed compares in the FW,
so we should avoid setting the top bit.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:48:01 -08:00
Jakub Kicinski
032748acf6 nfp: abm: provide more precise info about offload parameter validation 
Improve log messages printed when RED can't be offloaded because
of Qdisc parameters.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:48:01 -08:00
Jakub Kicinski
83ec8857a0 nfp: parse vNIC TLV capabilities at alloc time 
In certain cases initialization logic which follows allocation of
the vNIC structure may want to validate the capabilities of that vNIC.
This is easy before vNIC is initialized for normal capabilities which
are at fixed offsets in control memory, easy to locate and read, but
poses a challenge if the capabilities are in form of TLVs.  Parse
the TLVs early on so other code can just access parsed info, instead
of having to do the parsing by itself.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:48:00 -08:00
Jakub Kicinski
e38f5d11b9 nfp: pass ctrl_bar pointer to nfp_net_alloc 
Move setting ctrl_bar pointer to the nfp_net_alloc function,
to make sure we can parse capabilities early in the following
patch.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:48:00 -08:00
Jakub Kicinski
47330f9bdf nfp: abm: split qdisc offload code into a separate file 
The Qdisc offload code is logically separate, and we will soon
do significant surgery on it to support more Qdiscs, so move
it to a separate file.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:48:00 -08:00
Neal Cardwell
1106a5ade1 tcp_bbr: update comments to reflect pacing_margin_percent 
Recently, in commit ab408b6dc7 ("tcp: switch tcp and sch_fq to new
earliest departure time model"), the TCP BBR code switched to a new
approach of using an explicit bbr_pacing_margin_percent for shaving a
pacing rate "haircut", rather than the previous implict
approach. Update an old comment to reflect the new approach.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:46:17 -08:00
David S. Miller
dd00e06d3b Merge branch 'net-Use-__vlan_hwaccel_-helpers' 
Michał Mirosław says:

====================
net: Use __vlan_hwaccel_*() helpers

This series removes from networking core and driver code an assumption
about how VLAN tag presence is stored in an skb. This will allow to free
up overloading of VLAN.CFI bit to incidate tag's presence.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:45:05 -08:00
Michał Mirosław
3149a2711b sky2: use __vlan_hwaccel helpers 
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:45:04 -08:00
Michał Mirosław
4b17f9fe48 mlx4: use __vlan_hwaccel helpers 
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:45:04 -08:00
Michał Mirosław
c4062f89c5 benet: use __vlan_hwaccel helpers 
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:45:04 -08:00
Michał Mirosław
3e2ed0c257 ipv4/tunnel: use __vlan_hwaccel helpers 
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:45:04 -08:00
Michał Mirosław
5978f8a9fb bridge: use __vlan_hwaccel helpers 
This removes assumption than vlan_tci != 0 when tag is present.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:45:04 -08:00
Michał Mirosław
418a976d6c 8021q: use __vlan_hwaccel helpers 
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:45:04 -08:00
Michał Mirosław
82eea4cfe4 nfnetlink/queue: use __vlan_hwaccel helpers 
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:45:04 -08:00
Michał Mirosław
b1817524c0 net/core: use __vlan_hwaccel helpers 
This removes assumptions about VLAN_TAG_PRESENT bit.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:45:04 -08:00
Michał Mirosław
35c4a95d95 cxgb4: use __vlan_hwaccel helpers 
Use __vlan_hwaccel_put_tag() to set vlan tag and proto fields.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:45:03 -08:00
Cong Wang
49f8e8329c net: move __skb_checksum_complete*() to skbuff.c 
__skb_checksum_complete_head() and __skb_checksum_complete()
are both declared in skbuff.h, they fit better in skbuff.c
than datagram.c.

Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:38:52 -08:00
David S. Miller
d1cb9273c6 Merge branch 'net-ethernet-ti-cpsw-fix-vlan-mcast' 
Ivan Khoronzhuk says:

====================
net: ethernet: ti: cpsw: fix vlan mcast

The cpsw holds separate mcast entires for vlan entries. At this moment
driver adds only not vlan mcast addresses, omitting vlan/mcast entries.
As result mcast for vlans doesn't work. It can be fixed by adding same
mcast entries for every created vlan, but this patchseries uses more
sophisticated way and allows to create mcast entries only for vlans
that really require it. Generic functions from this series can be
reused for fixing vlan and macvlan unicast.

Simple example of ALE table before and after this series, having same
mcast entries as for vlan 100 as for real device (reserved vlan 2),
and one mcast address only for vlan 100 - 01:1b:19:00:00:00.

<---- Before this patchset ---->
vlan , vid = 2, untag_force = 0x5, reg_mcast = 0x5, mem_list = 0x5
mcast, vid = 2, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1
ucast, vid = 2, addr = 74:da:ea:47:7d:9d, persistant, port_num = 0x0
vlan , vid = 0, untag_force = 0x7, reg_mcast = 0x0, mem_list = 0x7
mcast, vid = 2, addr = 33:33:00:00:00:01, port_mask = 0x1
mcast, vid = 2, addr = 01:00:5e:00:00:01, port_mask = 0x1
vlan , vid = 1, untag_force = 0x3, reg_mcast = 0x3, mem_list = 0x3
mcast, vid = 1, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1
ucast, vid = 1, addr = 74:da:ea:47:7d:9c, persistant, port_num = 0x0
mcast, vid = 1, addr = 33:33:00:00:00:01, port_mask = 0x1
mcast, vid = 1, addr = 01:00:5e:00:00:01, port_mask = 0x1
mcast, vid = 2, addr = 01:80:c2:00:00:00, port_mask = 0x1
mcast, vid = 2, addr = 01:80:c2:00:00:03, port_mask = 0x1
mcast, vid = 2, addr = 01:80:c2:00:00:0e, port_mask = 0x1
mcast, vid = 1, addr = 01:80:c2:00:00:00, port_mask = 0x1
mcast, vid = 1, addr = 01:80:c2:00:00:03, port_mask = 0x1
mcast, vid = 1, addr = 01:80:c2:00:00:0e, port_mask = 0x1
mcast, vid = 2, addr = 33:33:ff:47:7d:9d, port_mask = 0x1
mcast, vid = 2, addr = 33:33:00:00:00:fb, port_mask = 0x1
mcast, vid = 2, addr = 33:33:00:01:00:03, port_mask = 0x1
mcast, vid = 1, addr = 33:33:ff:47:7d:9c, port_mask = 0x1
mcast, vid = 1, addr = 33:33:00:00:00:fb, port_mask = 0x1
mcast, vid = 1, addr = 33:33:00:01:00:03, port_mask = 0x1
mcast, vid = 1, addr = 01:00:5e:00:00:fb, port_mask = 0x1
mcast, vid = 1, addr = 01:00:5e:00:00:fc, port_mask = 0x1
vlan , vid = 100, untag_force = 0x0, reg_mcast = 0x5, mem_list = 0x5
ucast, vid = 100, addr = 74:da:ea:47:7d:9d, persistant, port_num = 0x0
mcast, vid = 100, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1
mcast, vid = 2, addr = 01:1b:19:00:00:00, port_mask = 0x1
			 ^^^
 Here mcast entry (ptpl2), has to be added only for vlan 100
 but added for reserved vlan 2...that's not enough.

<---- After this patchset ---->
vlan , vid = 2, untag_force = 0x5, reg_mcast = 0x5, mem_list = 0x5
mcast, vid = 2, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1
ucast, vid = 2, addr = 74:da:ea:47:7d:9d, persistant, port_num = 0x0
vlan , vid = 0, untag_force = 0x7, reg_mcast = 0x0, mem_list = 0x7
mcast, vid = 2, addr = 33:33:00:00:00:01, port_mask = 0x1
mcast, vid = 2, addr = 01:00:5e:00:00:01, port_mask = 0x1
vlan , vid = 1, untag_force = 0x3, reg_mcast = 0x3, mem_list = 0x3
mcast, vid = 1, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1
ucast, vid = 1, addr = 74:da:ea:47:7d:9c, persistant, port_num = 0x0
mcast, vid = 1, addr = 33:33:00:00:00:01, port_mask = 0x1
mcast, vid = 1, addr = 01:00:5e:00:00:01, port_mask = 0x1
mcast, vid = 2, addr = 01:80:c2:00:00:00, port_mask = 0x1
mcast, vid = 2, addr = 01:80:c2:00:00:03, port_mask = 0x1
mcast, vid = 2, addr = 01:80:c2:00:00:0e, port_mask = 0x1
mcast, vid = 1, addr = 01:80:c2:00:00:00, port_mask = 0x1
mcast, vid = 1, addr = 01:80:c2:00:00:03, port_mask = 0x1
mcast, vid = 1, addr = 01:80:c2:00:00:0e, port_mask = 0x1
mcast, vid = 2, addr = 33:33:ff:47:7d:9d, port_mask = 0x1
mcast, vid = 1, addr = 33:33:ff:47:7d:9c, port_mask = 0x1
mcast, vid = 2, addr = 33:33:00:00:00:fb, port_mask = 0x1
mcast, vid = 2, addr = 33:33:00:01:00:03, port_mask = 0x1
mcast, vid = 1, addr = 33:33:00:00:00:fb, port_mask = 0x1
mcast, vid = 1, addr = 33:33:00:01:00:03, port_mask = 0x1
vlan , vid = 100, untag_force = 0x0, reg_mcast = 0x5, mem_list = 0x5
ucast, vid = 100, addr = 74:da:ea:47:7d:9d, persistant, port_num = 0x0
mcast, vid = 100, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1
mcast, vid = 100, addr = 33:33:00:00:00:01, port_mask = 0x1
mcast, vid = 100, addr = 01:00:5e:00:00:01, port_mask = 0x1
mcast, vid = 100, addr = 33:33:ff:47:7d:9d, port_mask = 0x1
mcast, vid = 100, addr = 01:80:c2:00:00:00, port_mask = 0x1
mcast, vid = 100, addr = 01:80:c2:00:00:03, port_mask = 0x1
mcast, vid = 100, addr = 01:80:c2:00:00:0e, port_mask = 0x1
mcast, vid = 100, addr = 33:33:00:00:00:fb, port_mask = 0x1
mcast, vid = 100, addr = 33:33:00:01:00:03, port_mask = 0x1
mcast, vid = 100, addr = 01:1b:19:00:00:00, port_mask = 0x1
			 ^^^
    Here mcast entry (ptpl2), is added only for vlan 100
    as it should be.

Based on net-next/master

v2..v1:
  net: ethernet: ti: cpsw: fix vlan mcast
	- removed limit for legacy switch cpsw mode
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:30:58 -08:00
Ivan Khoronzhuk
00fe471205 net: ethernet: ti: cpsw: fix vlan configuration while down/up 
The vlan configuration is not restored after interface donw/up sequence
(if dual-emac - both interfaces). Tested on am572x EVM.

Steps to check:
~# ip link add link eth1 name eth1.100 type vlan id 100
~# ifconfig eth0 down
~# ifconfig eth1 down

Try to remove vid and observe warning:
~# ip link del eth1.100
[  739.526757] net eth1: removing vlanid 100 from vlan filter
[  739.533322] failed to kill vid 0081/100 for device eth1

This patch fixes it, restoring only vlan ALE entries and all other
unicast/multicast entries are restored by system calling rx_mode ndo.

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:30:58 -08:00
Ivan Khoronzhuk
15180eca56 net: ethernet: ti: cpsw: fix vlan mcast 
At this moment, mcast addresses are added for real device only
(reserved vlans for dual-emac mode), even if a mcast address was added
for some vlan only, thus ALE doesn't have corresponding vlan mcast
entries after vlan socket joined multicast group. So ALE drops vlan
frames with mcast addresses intended for vlans and potentially can
receive mcast frames for base ndev. That's not correct. So, fix it by
creating only vlan/mcast entries as requested. Patch doesn't use any
additional lists and is based on device mc address list and cpsw ALE
table entries.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:30:58 -08:00
Ivan Khoronzhuk
960abf68d2 net: 8021q: vlan_core: allow use list of vlans for real device 
It's redundancy for the drivers to hold the list of vlans when
absolutely the same list exists in vlan core. In most cases it's
needed only to traverse the vlan devices, their vids and sync some
settings with h/w, so add API to simplify this.

At least some of these drivers also can benefit:
grep "for_each.*vid" -r drivers/net/ethernet/

drivers/net/ethernet/hisilicon/hns3/hns3_enet.c:
drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c:
drivers/net/ethernet/qlogic/qlge/qlge_main.c:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:
drivers/net/ethernet/via/via-rhine.c:
drivers/net/ethernet/via/via-velocity.c:
drivers/net/ethernet/intel/igb/igb_main.c:
drivers/net/ethernet/intel/ice/ice_main.c:
drivers/net/ethernet/intel/e1000/e1000_main.c:
drivers/net/ethernet/intel/i40e/i40e_main.c:
drivers/net/ethernet/intel/e1000e/netdev.c:
drivers/net/ethernet/intel/igbvf/netdev.c:
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:
drivers/net/ethernet/intel/ixgb/ixgb_main.c:
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:
drivers/net/ethernet/amd/xgbe/xgbe-dev.c:
drivers/net/ethernet/emulex/benet/be_main.c:
drivers/net/ethernet/neterion/vxge/vxge-main.c:
drivers/net/ethernet/adaptec/starfire.c:
drivers/net/ethernet/brocade/bna/bnad.c:

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:30:58 -08:00
Ivan Khoronzhuk
e7946760de net: core: dev_addr_lists: add auxiliary func to handle reference address updates 
In order to avoid all table update, and only remove or add new
address, the auxiliary function exists, named __hw_addr_sync_dev().
It allows end driver do nothing when nothing changed and add/rm when
concrete address is firstly added or lastly removed. But it doesn't
include cases when an address of real device or vlan was reused by
other vlans or vlan/macval devices.

For handaling events when address was reused/unreused the patch adds
new auxiliary routine - __hw_addr_ref_sync_dev(). It allows to do
nothing when nothing was changed and do updates only for an address
being added/reused/deleted/unreused. Thus, clone address changes for
vlans can be mirrored in the table. The function is exclusive with
__hw_addr_sync_dev(). It's responsibility of the end driver to
identify address vlan device, if it needs so.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:30:57 -08:00
Edward Cree
29e1220717 sfc: use the new __netdev_tx_sent_queue BQL optimisation 
As added in 3e59020abf ("net: bql: add __netdev_tx_sent_queue()"), which
 see for performance rationale.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 20:01:29 -08:00
David S. Miller
eb4149c9a5 Merge branch 'net-Remove-VLAN_TAG_PRESENT-from-drivers' 
Michał Mirosław says:

====================
net: Remove VLAN_TAG_PRESENT from drivers

This series removes VLAN_TAG_PRESENT use from network drivers in
preparation to removing its special meaning.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 19:49:32 -08:00
Michał Mirosław
f4f9a5e6cc gianfar: remove use of VLAN_TAG_PRESENT 
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 19:49:32 -08:00
Michał Mirosław
9df46aefaf OVS: remove use of VLAN_TAG_PRESENT 
This is a minimal change to allow removing of VLAN_TAG_PRESENT.
It leaves OVS unable to use CFI bit, as fixing this would need
a deeper surgery involving userspace interface.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 19:49:31 -08:00
Michał Mirosław
f723a1a293 cnic: remove use of VLAN_TAG_PRESENT 
This just removes VLAN_TAG_PRESENT use.  VLAN TCI=0 special meaning is
deeply embedded in the driver code and so is left as is.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 19:49:31 -08:00
Michał Mirosław
1ef212afa4 i40iw: remove use of VLAN_TAG_PRESENT 
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 19:49:31 -08:00
Ilias Apalodimas
0d404a6128 net: socionext: refactor netsec_alloc_dring() 
return -ENOMEM directly instead of assigning it in a variable

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 19:42:41 -08:00
Ilias Apalodimas
4acb20b462 net: socionext: different approach on DMA 
Current driver dynamically allocates an skb and maps it as DMA Rx
buffer. In order to prepare for upcoming XDP changes, let's introduce a
different allocation scheme.
Buffers are allocated dynamically and mapped into hardware.
During the Rx operation the driver uses build_skb() to produce the
necessary buffers for the network stack.
This change increases performance ~15% on 64b packets with smmu disabled
and ~5% with smmu enabled

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 19:42:41 -08:00
Stefan Wahren
026b907d58 net: qca_spi: Add available buffer space verification 
Interferences on the SPI line could distort the response of
available buffer space. So at least we should check that the
response doesn't exceed the maximum available buffer space.
In error case increase a new error counter and retry it later.
This behavior avoids buffer errors in the QCA7000, which
results in an unnecessary chip reset including packet loss.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 19:41:01 -08:00
David Barmann
50254256f3 sock: Reset dst when changing sk_mark via setsockopt 
When setting the SO_MARK socket option, if the mark changes, the dst
needs to be reset so that a new route lookup is performed.

This fixes the case where an application wants to change routing by
setting a new sk_mark.  If this is done after some packets have already
been sent, the dst is cached and has no effect.

Signed-off-by: David Barmann <david.barmann@stackpath.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 19:36:13 -08:00
David S. Miller
52358cb5a3 Merge branch 's390-qeth-next' 
Julian Wiedmann says:

====================
s390/qeth: updates 2018-11-08

please apply the following qeth patches to net-next.

The first patch allows one more device type to query the FW for a MAC address,
the others are all basically just removal of duplicated or unused code.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 17:22:24 -08:00
Julian Wiedmann
ded9da1fc2 s390/qeth: don't process hsuid in qeth_l3_setup_netdev() 
qeth_l3_setup_netdev() checks if the hsuid attribute is set on the qeth
device, and propagates it to the net_device. In the past this was needed
to pick up any hsuid that was set before allocation of the net_device.

With commit d3d1b205e8 ("s390/qeth: allocate netdevice early") this
is no longer necessary, qeth_l3_dev_hsuid_store() always stores the
hsuid straight into dev->perm_addr.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 17:22:24 -08:00
Julian Wiedmann
9168f5ae38 s390/qeth: remove unused fallback in Layer3's MAC code 
If the CREATE ADDR sent by qeth_l3_iqd_read_initial_mac() fails, its
callback sets a random MAC address on the net_device. The error then
propagates back, and qeth_l3_setup_netdev() bails out without
registering the net_device.

Any subsequent call to qeth_l3_setup_netdev() will then attempt a fresh
CREATE ADDR which either 1) also fails, or 2) sets a proper MAC address
on the net_device. Consequently, the net_device will never be registered
with a random MAC and we can drop the fallback code.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 17:22:24 -08:00
Julian Wiedmann
4fa55fa94f s390/qeth: remove two IPA command helpers 
qeth_l3_send_ipa_arp_cmd() is merely a wrapper around
qeth_send_control_data() now. So push the length adjustment into
QETH_SETASS_BASE_LEN, and remove the wrapper. While at it, also remove
some redundant 0-initializations.

qeth_send_setassparms() requires that callers prepare their command
parameters, so that they can be copied into the parameter area in one
go. Skip the indirection, and just let callers set up the command
themselves.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 17:22:24 -08:00
Julian Wiedmann
605c9d5f58 s390/qeth: replace open-coded cmd setup 
Call qeth_prepare_ipa_cmd() during setup of a new IPA cmd buffer, so
that it is used for all commands. Thus ARP and SNMP requests don't have
to do their own initialization.

This will now also set the proper MPC protocol version for SNMP requests
on L2 devices.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 17:22:23 -08:00
Julian Wiedmann
d7d18da1f7 s390/qeth: remove card list 
Re-implement the card-by-RDEV lookup by using device model concepts, and
remove the now redundant list of all qeth card instances in the system.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 17:22:23 -08:00
Julian Wiedmann
81ec543939 s390/qeth: unify transmit code 
Since commit 82bf5c0867 ("s390/qeth: add support for IPv6 TSO"),
qeth_xmit() also knows how to build TSO packets and is practically
identical to qeth_l3_xmit().
Convert qeth_l3_xmit() into a thin wrapper that merely strips the
L2 header off a packet, and calls qeth_xmit() for the actual
TX processing.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-11-08 17:22:23 -08:00