The Brownstone board is compatible with "mrvl,mmp2". The actual DTS
already contains the string -- add it to the binding doc as well.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Tegra SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: devicetree@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert ZTE SoC bindings to DT schema format using json-schema.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Add missing description for Ultra96, zcu104, zcu106 and zcu111.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Xilinx SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert VIA SoC bindings to DT schema format using json-schema.
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert ST STi SoC bindings to DT schema format using json-schema.
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert CSR SiRF SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert QCom SoC bindings to DT schema format using json-schema.
Acked-by: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert TI NSpire SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert TI Davinci SoC bindings to DT schema format using json-schema.
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
In the past, there have been words on various lists that if LDO3 is
disabled in u-boot, but enabled in the DTS, the axp209 driver would
fail to continue/hang. Several enable/disable patches have been
issues to devicetree's in both the kernel and u-boot to address
this issue.
What really happened however, was that the AXP209 shuts down without
a notice and without setting an interrupt. This is caused when LDO3
gets overloaded, for example with large capacitors on the LDO3 output.
Normally, we would expect that AXP209 would source 200 mA as per
datasheet and set and trigger an interrupt when being overloaded.
For some reason however, this does not happen.
As a work-around, implement software-based 'regulator-soft-start'
property for AXP209 LDO3 regulator, which is used to first bring up
the LDO3 to the lowest possible voltage and then enable the LDO.
After that, we can set the requested voltage as usual.
Combining this setting with the regulator-ramp-delay allows LDO3 to
come up slowly and staggered, potentially reducing overall inrush current.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The AXP209 supports ramping up voltages on several regulators such as
DCDC2 and LDO3, therefore we can use the standard 'regulator-ramp-delay'
property for those 2 regulators.
Note that the voltage ramp only works when the regulator is already
enabled. E.g. when going from say 0.7 V to 3.6 V.
When turning on the regulator, no voltage ramp is performed in hardware.
What this means, is that if the bootloader brings up the voltage at 0.7 V,
the ramp delay property is properly applied. If however, the bootloader
leaves the power off, no ramp delay is applied when the power is
enabled by the regulator framework.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Priit Laes <plaes@plaes.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert Calxeda SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Altera SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert ARM Primecell binding to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert ARM timers to DT schema format using json-schema.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i2c-gpio binding to DT schema format using json-schema. This
serves as an example of how to include other schema (i2c-controller.yaml
in this case).
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Altera clkmgr to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add a how-to doc on writing DT schema documentation. This gives a
description of each section and details on how to validate the DT schema
file. The DT schema are written using json-schema vocabulary in a YAML
encoded document. Using jsonschema gives us access to existing tooling.
A YAML encoding gives us something easy to edit. The example is
annotated to help explain what each section does.
This example is just the tip of the iceberg, but is it the part most
developers writing bindings will interact with. Backing all this up
are meta-schema (to validate the binding schemas), some DT core schema,
YAML encoded DT output with dtc, and a small number of python scripts to
run validation.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.
Check DT binding schema documents:
make dt_binding_check
Build dts files and check using DT binding schema:
make dtbs_check
Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.
Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Added documentation for I2S IP core DT bindings.
Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Staging graduation
* ad2s90
- Driver for this resolver to digital chip.
New drivers and device support.
* ad5686
- Add support for ad5310r DAC and associated fix in value read back.
* exynos-adc
- Support for S5PV210 which is slightly different from other parts.
* mcp41010
- Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and
MCP42100 microchip potentiometers.
New ACPI ids.
* ak8975
- AKM9911 ACPI HID.
* kxcjk-1013
- KXJ2109 ACPI HID.
- KIOX010A ACPI HID.
New features
* ad5933
- Explicit DT binding.
* ad2s90
- Explicit DT binding including dropping spi setup that is done via dt
in favour of verifying the settings form DT.
* adt7316
- Explicit DT binding and support for gpio, irq_flags etc.
* stm32-adc
- Runtime power management.
Minor fixes and cleanups
* core
- Protect against missing info structure.
* ad2s90
- SPDX
- Add documentation fo the mutex.
* ad7280a
- Check allocation failure.
- Fix an accidental replacement of an error return.
* adt7316
- Switch some variables to be local and rename for consistency with other
drivers.
- Revert a false handling of 0 as an error introduced earlier this cycle.
* bmi160
- Use devm functions throughout probe() to avoid need for remove().
* hid-sensor-hub
- White space cleanup.
* hts221
- MAINTAINERS entry.
* lis302
- Use generic name in the DT binding doc.
* Messon-saradc
- Check for allocation error.
- Fix some presented clock names that break clk debugfs.
* qcom-spmi-adc
- A fix for initialization of the prescale property. Came late in the
cycle, so merge window is probably the best route for this.
* st_lsm6dsx
- Allow for variable read length to support wider range of slave devices.
-----BEGIN PGP SIGNATURE-----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=+vyl
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new device support, features and cleanups for the 4.21 cycle.
Staging graduation
* ad2s90
- Driver for this resolver to digital chip.
New drivers and device support.
* ad5686
- Add support for ad5310r DAC and associated fix in value read back.
* exynos-adc
- Support for S5PV210 which is slightly different from other parts.
* mcp41010
- Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and
MCP42100 microchip potentiometers.
New ACPI ids.
* ak8975
- AKM9911 ACPI HID.
* kxcjk-1013
- KXJ2109 ACPI HID.
- KIOX010A ACPI HID.
New features
* ad5933
- Explicit DT binding.
* ad2s90
- Explicit DT binding including dropping spi setup that is done via dt
in favour of verifying the settings form DT.
* adt7316
- Explicit DT binding and support for gpio, irq_flags etc.
* stm32-adc
- Runtime power management.
Minor fixes and cleanups
* core
- Protect against missing info structure.
* ad2s90
- SPDX
- Add documentation fo the mutex.
* ad7280a
- Check allocation failure.
- Fix an accidental replacement of an error return.
* adt7316
- Switch some variables to be local and rename for consistency with other
drivers.
- Revert a false handling of 0 as an error introduced earlier this cycle.
* bmi160
- Use devm functions throughout probe() to avoid need for remove().
* hid-sensor-hub
- White space cleanup.
* hts221
- MAINTAINERS entry.
* lis302
- Use generic name in the DT binding doc.
* Messon-saradc
- Check for allocation error.
- Fix some presented clock names that break clk debugfs.
* qcom-spmi-adc
- A fix for initialization of the prescale property. Came late in the
cycle, so merge window is probably the best route for this.
* st_lsm6dsx
- Allow for variable read length to support wider range of slave devices.
* tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (37 commits)
iio: adc: qcom-spmi-adc5: Initialize prescale properly
dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant
iio: adc: Allow selection of Exynos ADC on S5PV210
iio: adc: exynos-adc: Add S5PV210 variant
iio: bmi160: use all devm functions in probe
iio: dac: ad5686: fix bit shift read register
iio:dac:ad5686: Add AD5310R support
Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
dt-bindings: iio: accel: use a generic node name for lis302
iio: core: check 'info' value before registering the device
staging: iio: adc: ad7280a: fix overwrite of the returned value
staging: iio: adc: ad7280a: check for devm_kasprint() failure
iio: humidity: hts221: add entry in MAINTAINERS file
iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID
staging:iio:ad2s90: Move out of staging
staging:iio:ad2s90: Add comment to device state mutex
staging:iio:ad2s90: Replace license text w/ SPDX identifier
dt-bindings:iio:resolver: Add docs for ad2s90
staging:iio:ad2s90: Add max frequency check at probe
staging:iio:ad2s90: Remove spi setup that should be done via dt
...
This patch describes the compatible and the device tree
bindings necessary for the MCP16502 PMIC.
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the DT binding documentation for axg's SPDIF input.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string for Alwinner suniv F1C100s SoC interrupt
controller which is stripped version of sun4i
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The commit adds the device tree binding documentation for the MediaTek DWMAC
found on MediaTek MT2712.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert Rockchip SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
[move to per-board entries after confirming with Rob
and added recently added boards]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Our usual pull request with the changes shared between the H3 and H5 SoCs.
The major changes for this release are:
- Addition of the video engine for the H5
- H3 Camera support
- New board: Emlid Neutis N5, Mapleboard MP130
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqJJwAKCRDj7w1vZxhR
xTq4AP9SxrPeKDTBD4mKV+PVuJ2qq919M6o+mcxDkCecEMfbagD+JLkt2uGzdpb8
eC6CuieHvJq1y/akfDpRBf0ZZD0/bw0=
=yRd0
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3/H5 changes for 4.21
Our usual pull request with the changes shared between the H3 and H5 SoCs.
The major changes for this release are:
- Addition of the video engine for the H5
- H3 Camera support
- New board: Emlid Neutis N5, Mapleboard MP130
* tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: Add Video Engine node
ARM/arm64: dts: allwinner: Move H3/H5 syscon label over to soc-specific nodes
arm64: dts: allwinner: h5: Add system-control node with SRAM C1
ARM: dts: sun8i: h3: Fix the system-control register range
ARM: dts: sun8i: Add the H3/H5 CSI controller
ARM: dts: sun8i-h3: Add dts for the Mapleboard MP130
arm64: dts: allwinner: new board - Emlid Neutis N5
dt-bindings: vendor-prefix: new vendor - Emlid
ARM: dts: sun8i-h3: add sy8106a to orange pi plus
Signed-off-by: Olof Johansson <olof@lixom.net>
A few patches to enable a new Allwinner SoC based on an armv5 CPU.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqCUwAKCRDj7w1vZxhR
xcmLAP9AuTgQD5JiKVImc5Vo3bmgUFY0Afu5+iivBIpqeH9NiwD/U5qjdZ+fvdVz
61l0nMXHL44JazTSI9K1br0roJmxpQA=
=HPpM
-----END PGP SIGNATURE-----
Merge tag 'sunxi-core-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc
Allwinner core changes for 4.21
A few patches to enable a new Allwinner SoC based on an armv5 CPU.
* tag 'sunxi-core-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt
ARM: sunxi: add Allwinner ARMv5 SoCs
dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC
ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
- A series from Aisheng that improves SCU power domain bindings by
defining '#power-domain-cells' as 1, and adds i.MX8 SCU power domain
driver support on top of it.
- A series from Lucas that updates gpcv2 driver for scalability and
adds i.MX8MQ support into the driver.
- Increase gpc driver GPC_CLK_MAX definition to 7, as DISPLAY power
domain on imx6sx has 7 clocks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcDbkEAAoJEFBXWFqHsHzO1C4H/05Khi/tWF6xZNMw7C4Q6wf6
WIFhB73tTLxZ8W0n8gIS+Y2YKFw6+dy8J/ZpkFBpe+f6rqVsyTzUvGB+6Ii3Nomu
V2juCn8XaHfv32FfaPBCelnitcpgFrnEvXYS6u8mSEt1DSu8rK2y2yMcnrkdcurq
Jy9eAYjUrdXYGsH9uw36mco7q25I5wSnXOLzZ0SLXSqB//a9YlzPKGRmQqF0uQ3t
K8uT5PwqEBrjNAP6sTvSzMf6vSeXD5MGqrEvd/LnGp6IPwx7R+z4Y+HUw/RtTIdg
rP1hAt3PLDD7Ibk+GHH5q/M2+9fI2dn2y44JXGOlQvqdmoLVg1vCpTLEj8OioFU=
=/3Mg
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers change for 4.21:
- A series from Aisheng that improves SCU power domain bindings by
defining '#power-domain-cells' as 1, and adds i.MX8 SCU power domain
driver support on top of it.
- A series from Lucas that updates gpcv2 driver for scalability and
adds i.MX8MQ support into the driver.
- Increase gpc driver GPC_CLK_MAX definition to 7, as DISPLAY power
domain on imx6sx has 7 clocks.
* tag 'imx-drivers-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
firmware: imx: add SCU power domain driver
firmware: imx: add pm svc headfile
dt-bindings: fsl: scu: update power domain binding
firmware: imx: remove resource id enums
dt-bindings: imx: add scu resource id headfile
Signed-off-by: Olof Johansson <olof@lixom.net>
Those patches are all about our SRAM driver, to enable new SoCs: the
F1c100s, the H5 and the A64 C1 SRAM, that is used by the video decoding
engine.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqDmQAKCRDj7w1vZxhR
xQxsAPwMd/pS6L2+mRZuBrog4P4PHSHO4cSY76YpYanjygNh6AEAm/IfGtiHaFwe
A4Mjtwmw7Rg/HmvETBlgGLE7aAHppw8=
=UHav
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers
Allwinner drivers changes for 4.21
Those patches are all about our SRAM driver, to enable new SoCs: the
F1c100s, the H5 and the A64 C1 SRAM, that is used by the video decoding
engine.
* tag 'sunxi-drivers-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
dt-bindings: sram: Add Allwinner suniv F1C100s
soc: sunxi: sram: Add support for the H5 SoC system control
soc: sunxi: sram: Enable EMAC clock access for H3 variant
soc: sunxi: Change to use DEFINE_SHOW_ATTRIBUTE macro
Signed-off-by: Olof Johansson <olof@lixom.net>
timer and emmc pins) from its first real-world user.
RK3188 improvements (OPPv2, cpu node updates) to prepare for a new
devicetree, the BQ Edison 2 Quad-Core.
VPU device node for rk3288, right now only the jpeg encoder part
will be in the kernel but hopefully other codecs will follow.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlwQw64QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgRFJB/0WHQQtzWXEtFYxgaoWFAgkK8/Lq2LxDBTa
aMx+slPBqMEpLOP3jfxHRy4C+dL2GX2LgaHPJN1ImwSEjUAfPsfO47LNUBl4w0Sx
t2ulAX/TC4wz5Wa78NsGxaszHgpxmDTYeO7ue1nYJ13YlJZ2MIp/Nr9903rWve6h
hPSzkUVe4Vuiz+KLXchzkRWS13zVhy0t9FyPyhJqzZ4ESDhS74g6cm6wuUB0XHXS
EHvhSvgdMa8x1/2flEIXGUAScAWydiglZcraNr3LmrN6dG8PS/IhbGsxp5KCzMTZ
DAGR47tpbXQ1N5HZEqk30yiYMDN/cNeeo2wF9nR9Df//Bj/AwnI6
=A+kY
-----END PGP SIGNATURE-----
Merge tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
RV1108 improvements (uart-dma, clocks, interrupt numbers, gmac support
timer and emmc pins) from its first real-world user.
RK3188 improvements (OPPv2, cpu node updates) to prepare for a new
devicetree, the BQ Edison 2 Quad-Core.
VPU device node for rk3288, right now only the jpeg encoder part
will be in the kernel but hopefully other codecs will follow.
* tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add internal timer support for rv1108
ARM: dts: rockchip: add BQ Edison 2 QC devicetree
ARM: dts: rockchip: add VPU device node for RK3288
ARM: dts: rockchip: update cpu supplies on rk3188
ARM: dts: rockchip: add phandles to secondary cpu cores
ARM: dts: rockchip: add cpu-core resets for rk3188
ARM: dts: rockchip: convert rk3188 to opp-v2
ARM: dts: rockchip: add #sound-dai-cells to Cortex-A9 i2s
ARM: dts: rockchip: Add UART DMA support for rv1108
ARM: dts: rockchip: Assign the proper GPIO clocks for rv1108
ARM: dts: rockchip: Fix the PMU interrupt number for rv1108
ARM: dts: rockchip: Pass the 'arm,cpu-registers-not-fw-configured' property on rv1108
ARM: dts: rockchip: Pass the 'clock-latency' property on rv1108
ARM: dts: rockchip: Add rv1108 GMAC support
ARM: dts: rockchip: add rv1108 eMMC pin settings
Signed-off-by: Olof Johansson <olof@lixom.net>
- It includes the initial device tree for i.MX7ULP SoC and EVK board
support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcDd7aAAoJEFBXWFqHsHzOgNEIAKc4dqYzWmfJTMnJGO+Bb1Rc
BPkENpRWk6rWVBuxXwN4MTupXIgj96bBHWsg3kplgcthMRAl2wgomHTpNWXk8R9m
Fn6sH9yIoeqr+xs6BzzQ8COrFBXg8CEZgKLgy+9nhfFi3xNf6pN6IQLgqrGF17MC
zFH+sM0rqlh1l3BfHXMuwHvbhw+ms6Qo6z68OGSXmu0bUPThm2FV/Akivqp+INSI
CeFyZ8RMTkEKVSkFEryZaprKgqlIYW2Kl54yeALjvG03mtn1onaZKqsNV7YonYMC
X+mZPLnwjBUnLi2HbKrStmTR0ePQjg5x1tMT+Eco7Cjj4h6H6uBu0IYMi4PiN7o=
=aOId
-----END PGP SIGNATURE-----
Merge tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX7ULP device tree for 4.21:
- It includes the initial device tree for i.MX7ULP SoC and EVK board
support.
* tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: add imx7ulp evk support
ARM: dts: imx: add common imx7ulp dtsi support
dt-bindings: fsl: add imx7ulp pm related components bindings
dt-bindings: fsl: add compatible for imx7ulp evk
clk: imx: add imx7ulp clk driver
clk: imx: implement new clk_hw based APIs
clk: imx: make mux parent strings const
dt-bindings: clock: add imx7ulp clock binding doc
clk: imx: add imx7ulp composite clk support
clk: imx: add pfdv2 support
clk: imx: add pllv4 support
clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support
clk: imx: add gatable clock divider support
Signed-off-by: Olof Johansson <olof@lixom.net>
- New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board.
- Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature
for flexcan, and enable devices on a few i.MX6 NXP boards.
- Enable AUO G101EVN010 lcd panel and Goodix touch support for
imx6ul-ccimx6ulsbcpro board.
- Enable sensors support for imx6qdl-sabresd board: egalax touch, light,
magnetometer and accelerometer sensor.
- Switch more boards to use SPDX identifier.
- Fix memory node duplication in i.MX device tree sources.
- Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs.
- Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid
incorrect device matching.
- Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which
are now supported by the freedreno driver.
- Add DCP device support for i.MX6ULL, which requires explicit clock
enabling.
- Add '#thermal-sensor-cells' for thermal device and '#cooling-cells'
for cooling devices.
- Add missing clock information for EPIT on i.MX25 SoC.
- Add PWM and qdma devices for LS1021A SoC.
- Update cooling maps of LS1021A SoC to include all devices affected by
individual trip points.
- Random device addition and cleanup on various boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcDcmeAAoJEFBXWFqHsHzO9uIH/2e87ayMkmIugUt57aJUOWRG
pbNZZQXHsupVVu0VtYnKp3XBuhMXzvbhhihn9x9pyV+EJ2V4dgtU6gS2EDH2G9pl
TCJItVDOZgllamIg2/McVkuQLsH8tEybud4wlWve96eP22mn6CyCPiDtmdvKYigA
QQEFeSI8YgG1VLbXmhmox0HcowOm2C8asw8sSuo15Y2tWjAcCzKK0p3izRJQhSWn
G/uAUwQQB7e2zrTXfTiJpMWEt664C0tqlhZLlfaPpvmufIbDcpbLHp7mK3iW0rZA
Pjr1uT00rpnRkPkLvtT6tKTi2KviCwua1R58aUXW3ju1Fw6DJC1vSuPyNClCuyk=
=dGG8
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.21:
- New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board.
- Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature
for flexcan, and enable devices on a few i.MX6 NXP boards.
- Enable AUO G101EVN010 lcd panel and Goodix touch support for
imx6ul-ccimx6ulsbcpro board.
- Enable sensors support for imx6qdl-sabresd board: egalax touch, light,
magnetometer and accelerometer sensor.
- Switch more boards to use SPDX identifier.
- Fix memory node duplication in i.MX device tree sources.
- Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs.
- Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid
incorrect device matching.
- Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which
are now supported by the freedreno driver.
- Add DCP device support for i.MX6ULL, which requires explicit clock
enabling.
- Add '#thermal-sensor-cells' for thermal device and '#cooling-cells'
for cooling devices.
- Add missing clock information for EPIT on i.MX25 SoC.
- Add PWM and qdma devices for LS1021A SoC.
- Update cooling maps of LS1021A SoC to include all devices affected by
individual trip points.
- Random device addition and cleanup on various boards.
* tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (82 commits)
ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1
ARM: dts: imx6ul: Remove extra space between node name and brace
ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulators
ARM: dts: imx6ul: add flexcan support
ARM: dts: imx5: add gpu nodes
ARM: dts: imx6qdl-sabresd: add accelerometer sensor support
ARM: dts: imx6qdl-sabresd: add magnetometer sensor support
ARM: dts: imx6qdl-sabresd: add light sensor support
ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus"
ARM: dts: imx6qdl: Fix memory node duplication
ARM: dts: imx6dl-mamoj: Add a memory node
ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication
ARM: dts: vf610-zii-scu4-aib: Add HI8435 support
ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus
ARM: dts: imx7s: Add flexcan stop mode wakeup support
ARM: dts: imx6ul: Add flexcan stop mode wakeup support
ARM: dts: imx6qdl: Add flexcan stop mode wakeup support
ARM: dts: imx6sx: Add flexcan stop mode wakeup support
ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variant
ARM: dts: imx6ul-pico-hobbit: Extend peripherals support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Our usual set of arm64 DT changes, with the biggest additions being:
- Support for the video decoding engine in the A64
- Support for the audio codec in the A64
- USB Support in the H6
- HDMI Support in the H6
- EMAC Support in the H6
- New board: Orange Pi Lite2
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqGvQAKCRDj7w1vZxhR
xeObAQDZGMVjFjiWlC0jYjBQoCHMf1dlu6iPd4qe8h3GS1XUVQD/c8SJaMj5oLX1
HKjtqQD+sJRUQdcWlwAsqEEKyKUhfQs=
=aAr3
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 DT changes for 4.21
Our usual set of arm64 DT changes, with the biggest additions being:
- Support for the video decoding engine in the A64
- Support for the audio codec in the A64
- USB Support in the H6
- HDMI Support in the H6
- EMAC Support in the H6
- New board: Orange Pi Lite2
* tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
arm64: dts: allwinner: a64: Fix up RTC device node and clock references
arm64: dts: allwinner: a64: Add Video Engine node
arm64: dts: allwinner: a64: Add support for the SRAM C1 section
arm64: dts: allwinner: a64: pinebook: enable power supplies
arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies
arm64: dts: allwinner: axp803: add AC and battery power supplies
arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec
arm64: dts: allwinner: a64: enable sound on Pinebook
arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine
arm64: dts: allwinner: a64: add nodes necessary for analog sound support
arm64: dts: allwinner: h6: orangepi: Add device nodes for LEDs
arm64: dts: allwinner: h6: orangepi: Enable USB 2.0 host and OTG ports
arm64: dts: allwinner: h6: orangepi: Add board-wide 5V regulator
arm64: dts: allwinner: h6: fix EMAC compatible string sequence
arm64: dts: allwinner: a64: Add device node for Mali-400 GPU
dt-bindings: gpu: mali-utgard: Add compatible for A64 Mali
arm64: dts: allwinner: h6: enable USB2 on Pine H64
arm64: dts: allwinner: h6: add USB Vbus regulator for Pine H64
arm64: dts: allwinner: h6: add USB2-related device nodes
arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.
We also have a bunch of other good, more meaningful, changes:
- Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
SoCs
- AXP803 PMIC AC Power supply support
- Rework of the oscillators tree
- Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano
Plus a few enhancements here and there.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqFhwAKCRDj7w1vZxhR
xcQzAQDJu0dPrs3SQlWdDhOa0iFVp/7gmN4iRMxMScIIjrRUgAEAzmhUjQNNTNLc
OPF9XzMdT12rs2SAbk2XXtWH1hN8KQA=
=vSCG
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.21
This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.
We also have a bunch of other good, more meaningful, changes:
- Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
SoCs
- AXP803 PMIC AC Power supply support
- Rework of the oscillators tree
- Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano
Plus a few enhancements here and there.
* tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits)
ARM: dts: sunxi: Fix PMU compatible strings
ARM: dts: sun8i: r40: Add RTC device node
ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references
ARM: dts: sun8i: a23/a33: Fix up RTC device node
ARM: dts: sun8i: r40: Add clock accuracy for external oscillators
ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators
ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs
ARM: dts: sun8i: h3: Remove unnecessary reserved memory node
ARM: dts: sun8i: a33: Remove unnecessary reserved memory node
ARM: dts: suniv: Add device tree for Lichee Pi Nano
ARM: dts: suniv: add initial DTSI file for F1C100s
ARM: dts: axp81x: add AC power supply subnode
ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings
ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers
ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning
ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings
ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses
ARM: dts: sun8i: BPI-M2M: Remove i2c nodes
ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers
ARM: dts: sunxi: reference: Move the muxing back to the common DTSI
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Add information about new compatible for S5PV210
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add documentation for regulator modes and suspend states.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the bindings.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
So it looks like folks are interested in dwc3 again. Almost 64% of the
changes are in dwc3 this time around with some other bits in gadget
functions and dwc2.
There are two important parts here: a. removal of the waitqueue from
dwc3's dequeue implementation, which will guarantee that gadget
functions can dequeue from any context and; b. better method for
starting isochronous transfers to avoid, as much as possible, missed
isoc frames.
Apart from these, we have the usual set of non-critical fixes and new
features all over the place.
-----BEGIN PGP SIGNATURE-----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=n8VS
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB changes for v4.21
So it looks like folks are interested in dwc3 again. Almost 64% of the
changes are in dwc3 this time around with some other bits in gadget
functions and dwc2.
There are two important parts here: a. removal of the waitqueue from
dwc3's dequeue implementation, which will guarantee that gadget
functions can dequeue from any context and; b. better method for
starting isochronous transfers to avoid, as much as possible, missed
isoc frames.
Apart from these, we have the usual set of non-critical fixes and new
features all over the place.
* tag 'usb-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (56 commits)
usb: dwc2: Fix disable all EP's on disconnect
usb: dwc3: gadget: Disable CSP for stream OUT ep
usb: dwc2: disable power_down on Amlogic devices
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTE
usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler
usb: dwc3: trace: add missing break statement to make compiler happy
usb: dwc3: gadget: Report isoc transfer frame number
usb: gadget: Introduce frame_number to usb_request
usb: renesas_usbhs: Use SIMPLE_DEV_PM_OPS macro
usb: renesas_usbhs: Remove dummy runtime PM callbacks
usb: dwc2: host: use hrtimer for NAK retries
usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode
usb: mtu3: enable SETUPENDISR interrupt
usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)
usb: mtu3: enable hardware remote wakeup from L1 automatically
usb: mtu3: remove QMU checksum
usb/mtu3: power down device ip at setup
usb: dwc2: Disable power down feature on Samsung SoCs
usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
...
*) Change phy set_mode ops to take both mode and setmode as arguments
*) Add phy_configure() and phy_validate() API's mostly used for MIPI D-PHY
*) Add helpers to get default values of parameters define in MIPI D-PHY spec
*) Add driver for TI's CPSW Port PHY Interface Mode selection
*) Add driver for Cadence Sierra PHY used with USB and PCIe
*) Add driver for Freescale i.MX8MQ USB3 PHY
*) Fixes QMP PHY bindings to allow the clocks provided by the PHY to be
pointed at in device tree
*) Fix for using fully specified regions (in device tree) for configuring
the second lane in dual lane PHYs in QMP PHY
*) Add support for Allwinner H6 USB2 PHY in phy-sun4i-usb driver
*) Update phy-rcar-gen3-usb driver to follow the hardware manual
*) Add support for fine grained power management in mapphone-mdm6600 driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----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=JLIJ
-----END PGP SIGNATURE-----
Merge tag 'phy-for-4.21_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 4.21
*) Change phy set_mode ops to take both mode and setmode as arguments
*) Add phy_configure() and phy_validate() API's mostly used for MIPI D-PHY
*) Add helpers to get default values of parameters define in MIPI D-PHY spec
*) Add driver for TI's CPSW Port PHY Interface Mode selection
*) Add driver for Cadence Sierra PHY used with USB and PCIe
*) Add driver for Freescale i.MX8MQ USB3 PHY
*) Fixes QMP PHY bindings to allow the clocks provided by the PHY to be
pointed at in device tree
*) Fix for using fully specified regions (in device tree) for configuring
the second lane in dual lane PHYs in QMP PHY
*) Add support for Allwinner H6 USB2 PHY in phy-sun4i-usb driver
*) Update phy-rcar-gen3-usb driver to follow the hardware manual
*) Add support for fine grained power management in mapphone-mdm6600 driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-4.21_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (30 commits)
phy: qcom-qmp: Expose provided clocks to DT
dt-bindings: phy-qcom-qmp: Move #clock-cells to child
phy: qcom-qmp: Utilize fully-specified DT registers
dt-bindings: phy-qcom-qmp: Fix register underspecification
phy: ti: fix semicolon.cocci warnings
phy: dphy: Add configuration helpers
phy: Add MIPI D-PHY configuration options
phy: Add configuration interface
phy: Add MIPI D-PHY mode
phy: add driver for Freescale i.MX8MQ USB3 PHY
dt-bindings: phy: add binding for Freescale i.MX8MQ USB3 PHY
phy: Use of_node_name_eq for node name comparisons
net: ethernet: ti: cpsw: add support for port interface mode selection phy
dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy
phy: ti: introduce phy-gmii-sel driver
dt-bindings: phy: add cpsw port interface mode selection phy bindings
phy: mvebu-cp110-comphy: fix spelling in structure name
phy: mapphone-mdm6600: Improve phy related runtime PM calls
phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure
phy: cadence: Add driver for Sierra PHY
...
The phy-qcom-qmp bindings specified #clock-cells as 1. This was never used
because of_clk_add_provider() was never called, so there was no way anybody
could reference these clocks from DT. Furthermore, even if they could be
accessed, the bindings never specified what should go in that additional
cell.
Fix these incomplete and broken bindings. Move the #clock-cells into the
child node, since that is the actual clock provider, and not all
instances of qcom-qmp-phy are clock providers. Also set #clock-cells to
zero, since there's nothing to pass to it.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add register regions for the second lane of dual-lane nodes.
This additional specification is needed so that the driver can stop
reaching beyond the tx and rx register allocations to get at the
second lane registers in a dual-lane PHY.
While in there, document #clock-cells as optional for PHYs that don't
provide a pipe clock. Also, document the pcs_misc register region, which
was being quietly supplied and used.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This adds the binding for the USB3 PHY found on the i.MX8M SoC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The cpsw-phy-sel driver was replaced with new PHY driver phy-gmii-sel, so
deprecate cpsw-phy-sel bindings and update CPSW binding to use phy-gmii-sel
PHY bindings.
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add DT binding documentation for Sierra PHY. The PHY supports
a number of different protocols, including PCIe and USB.
The PHY lanes may be configured as single or multi-lane links.
Each link is treated as a separate sub-node. For example, if
there are 4 lanes in total the first 2 might be configured as
a multi-lane PCIe link while the other two are single lane
USB links, and in this case there would be 3 sub-nodes.
There are two resets for the PHY block (one for APB register
access, one for the PHY link) and separate resets for each
link. For multi-lane links, the reset corresponds to the
reset line on the master lane, the resets on other lanes
have no effect.
Signed-off-by: Alan Douglas <adouglas@cadence.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The USB2.0 PHY on Allwinner H6 is similar to the ones on the ones on
older SoCs, but with holes in PHY number (USB1 and USB2 are missing, in
which USB1 is a USB3 PHY).
Add binding for the PHY.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The "at," prefix was never correct for Atmel, so fix the few occurrences
that got it wrong. Use "atmel," instead.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Peter Rosin <peda@axentia.se>
[wsa: merged two patches into one, dropped 'trivial-devices' hunk which
needs to go in seperately]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Add support for the internal timer peripheral on RV1108.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Allow the PHY drivers to get the ref clock from the DT.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Document the new amd,imageon compatible, used for non-qcom hardware that
uses the drm/msm driver (iMX5).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This allows controlling which of the 8 lanes are used for 6 bit color.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.
-----BEGIN PGP SIGNATURE-----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=3PUd
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
dt-bindings: Changes for v4.21-rc1
This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.
* tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra186-pmc: Add interrupt controller properties
dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
dt: bindings: Move tegra20-emc binding to memory-controllers directory
dt: bindings: tegra20-emc: Document clock property
dt: bindings: tegra20-emc: Document interrupt property
dt-bindings: usb: xhci-tegra: Add power-domain details
Signed-off-by: Olof Johansson <olof@lixom.net>
* Move 'renesas,prr' binding to its own document
- Prepration for converting board-level bindings to json-schema
* Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM
-----BEGIN PGP SIGNATURE-----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=BGWx
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Bindings Updates for v4.21
* Move 'renesas,prr' binding to its own document
- Prepration for converting board-level bindings to json-schema
* Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM
* tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
dt-bindings: arm: renesas: Document iWave RZ/G1N SOM
Signed-off-by: Olof Johansson <olof@lixom.net>
The status quo on i.MX6 is that if "over-current-active-high" is
specified in the device tree this is configured as expected. If
the property is missing polarity isn't changed and so the
polarity is kept as setup by the bootloader. Reset default is
active high, so active low can only be used with help by the
bootloader. On i.MX7 it is similar, but there disabling of
over current detection has a similar inconsistency.
This patch introduces a new property that allows to explicitly
configure for active low over current detection and consistently
sets this up. In the absence of an explicit configuration the
bit is kept as is. On i.MX7 over current detection is used unless
disabled in the device tree.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
For USB HSIC, the data and strobe pin needs to be pulled down
at default, we consider it as "idle" state. When the USB host
is ready to be used, the strobe pin needs to be pulled up,
we consider it as "active" state.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
The pcf85263 RTC is compatible with the pcf85363 RTC.
The difference between the pcf85263 and pcf85363 RTC is that the latter has
64 bytes more RAM. This renders them incompatible from a DT point of view.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The example should follow the practice or using a generic node name
instead of the precise programming model, as recommended by the DTSpec.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add optional reset GPIO, as such a signal is available on the KSZ switches.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Woojung Huh <Woojung.Huh@microchip.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
When specifying external clock inputs to the CCM the current code
requires the clocks to be in a "clocks" child node of the DT root.
This is not really conformant with DT best practices.
To avoid the need to deviate from those best practices, allow the
clock inputs to be specified via standard clock handles. This is
in line with how drivers of the later CCM driver revisions on
newer i.MX SoCs handle this.
As we can't retroactively change the DT binding, allow this as an
option with a fallback to the old way of how this has been handled.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add new compatible to the device tree bindings.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Several conflicts, seemingly all over the place.
I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.
The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.
The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.
cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.
__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy. Or at least I think it was :-)
Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.
The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the compatible strings for emtrion emCON-MX6 SoM's.
Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Removed the compatible string "snps,dw-pcie", it is for the reference
platform driver for PCI RC IP Protoyping Kits based on the ARC SDP,
so it is not suitable for all platform with designware PCIe controller,
and platform vendors have themselves' drivers.
The compatible string "snsp,dw-pcie" was added by mistake and it's not
matched that time, but it is matched because PCIe drivers has been
collected recently.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PCIe compatible string for LS1043A was lost, so add it.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Introduce protected-clock DT binding to fix breakage on qcom sdm845-mtp
boards where the qspi clks introduced this merge window cause the
firmware on those boards to take down the system if we try to read
the clk registers
- Fix a couple off-by-one errors found by Dan Carpenter
- Handle failure in zynq fixed factor clk driver to avoid using
uninitialized data
-----BEGIN PGP SIGNATURE-----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=t1kp
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes this time:
- Introduce protected-clock DT binding to fix breakage on qcom
sdm845-mtp boards where the qspi clks introduced this merge window
cause the firmware on those boards to take down the system if we
try to read the clk registers
- Fix a couple off-by-one errors found by Dan Carpenter
- Handle failure in zynq fixed factor clk driver to avoid using
uninitialized data"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: zynqmp: Off by one in zynqmp_is_valid_clock()
clk: mmp: Off by one in mmp_clk_add()
clk: mvebu: Off by one bugs in cp110_of_clk_get()
arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks
clk: qcom: Support 'protected-clocks' property
dt-bindings: clk: Introduce 'protected-clocks' property
clk: zynqmp: handle fixed factor param query error
The example should follow the practice or using a generic node name
instead of the precise programming model, as recommended by the DTSpec.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This introduces two new compatibles for the cedrus driver, for the
A64 and H5 platforms.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the R8A77980 SoC support to the R-Car VIN driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the R-Car V3H (AKA R8A77980) SoC support to the R-Car CSI2 driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
From LPC18xx and LPC43xx User Manuals the GPIO controller consists of
the following weakly connected blocks:
* GPIO pin interrupt block at 0x40087000,
* GPIO GROUP0 interrupt block at 0x40088000,
* GPIO GROUP1 interrupt block at 0x40089000,
* GPIO port block at 0x400F4000.
While all 4 sub-controller blocks have their own I/O addresses, moreover
all 3 interrupt blocks are APB0 peripherals and high-speed GPIO block is
an AHB slave, according to the hardware manual interrupt controllers and
GPIO controller block are seen as a single device, all 4 sub-controllers
have the shared reset signal RGU #28 and the same shared clock to access
registers CLK_Mx_GPIO on CCU1.
The change adds descriptions of the currently missing interrupt controller
blocks found on GPIO controller, new added properties are 'reg-names',
'resets', 'interrupt-controller' and '#interrupt-cells', also the example
is updated to reflect the changes in device tree binding description.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The register range for the RTC extends beyond 0x54.
Use the size from the user manual's memory map instead.
Fixes: 9765d2d943 ("rtc: sun6i: Add sun6i RTC driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add device tree bindings associating Arm TrustZone CryptoCell 703 with the
ccree driver.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the PSPI NPCM binding document of the spi aliases use
to define the spi ID number.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to
switch to the gpiod consume API to handle this correctly.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to
switch to the gpiod consume API to handle this correctly.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation to convert board-level bindings to json-schema, move
various misc SoC bindings out to their own file.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Document the iW-RainboW-G20D-Qseven-RZG1N device tree bindings,
listing it as a supported board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Document the iW-RainboW-G20M-RZ/G1N Qseven device tree bindings,
listing it as a supported system on module.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Experiments showed that on at least the H3/H5/A64 the RTC's internal
oscillator also feeds the CPUS mux in the PRCM.
Export this clock through the device tree, instead of having to use
a dummy fixed-clock device node, for the PRCM to consume. This will
properly describe the relationship between the clocks.
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The A31 does not have an external clock output directly from the RTC.
Instead, it has four muxable clock outputs: three (A, B, C) are
controlled from the CCU, and the last (D) is controlled from the PRCM.
Deprecate the usage of the external clock output for the A31 compatible.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
While doing Bluetooth enablement for various boards based on various
Allwinner SoCs, minor differences in the RTC modules were found. These
include a lack of an external clock output (A31), different internal
oscillator frequencies (H3/H5/A64/V3/V3s), different regulator voltage
settings (H5/H6), and the presence of miscellaneous registers unrelated
to the RTC (A64/R40/H5/H6). The datasheet also describes different number
of registers for non-volatile storage, though based on actual experiments
the actual number is the same across the board.
This patch adds a list of all pre-H6 variants, grouped by the internal
oscillator's clock rate, regulator settings, and the presence of the
external clock output. Combinations are introduced for the variants that
have miscellaneous registers.
The RTC block in the H6 also handles the 24 MHz DCXO. This will require
more device tree binding changes and will be done later.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The clock output section for this binding describes the two outputs in
the descriptions for both the #clock-cells and clock-output-names
properties.
Instead of overlapping information that is hard to read, rewrite the
clock outputs as a list of indices and descriptions. The properies
can reference this list instead. This will also make it easier to
add notes or conditions to the clocks, and also for adding new outputs.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The efuse found in gx SoC requires a peripheral clock to properly operate.
We have been able to work without it until now because the clock was on by
default, and left on by the CCF. Soon, it will not be the case anymore, so
the device needs to claim the clock it needs
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Edison 2 Quad-Core was a Tablet device released in 2013 by MundoReader
using a rk3188 soc. Add a devicetree for it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add nvmem properties to calibrate FGU from eFuse controller.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The bq24196 is another variant of the bq24190 charger ic.
Its register set is identical to the bq24192 and it even reuses
the same part number (0x5).
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add support for the ti,bq24192 variant and a child node for the
usb-otg-vbus regulator.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Similar to gpio-reset allow to specify active and inactive delays
while keeping the 100ms defaults that were used previously all the time.
The dt-properties are named the same as in gpio-reset but get an "-ms"
suffix as properties should contain such a suffix specifying its unit.
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Documentation/networking/ is full of cryptically named files with
driver documentation. This makes finding interesting information
at a glance really hard. Move all those files into a directory
called device_drivers (since not all drivers are for device) and
fix up references.
RFC v0.1 -> RFC v1:
- also add .txt suffix to the files which are missing it (Quentin)
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Henrik Austad <henrik@austad.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge from Upstream after the latest media fixes branch, because we
need one patch that it is there.
* commit '0072a0c14d5b7cb72c611d396f143f5dcd73ebe2': (1108 commits)
ide: Change to use DEFINE_SHOW_ATTRIBUTE macro
ide: pmac: add of_node_put()
drivers/tty: add missing of_node_put()
drivers/sbus/char: add of_node_put()
sbus: char: add of_node_put()
Linux 4.20-rc5
PCI: Fix incorrect value returned from pcie_get_speed_cap()
MAINTAINERS: Update linux-mips mailing list address
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
...
changes related to axp813.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=FoKv
-----END PGP SIGNATURE-----
Merge tag 'psy-mfd-axp813-immutable-for-v4.21-signed' into psy-next
Immutable branch between mfd and power-supply for driver
changes related to axp813.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The AXP803/AXP813 AC power supply can limit input current and voltage.
Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add the pclk-sample property to the list of optional properties
for the mt9m111 camera sensor.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Replace the vague binding by a more verbose. Remove the remote property
from the example since the driver don't support such a property. Also
remove the bus-width property from the endpoint since the driver don't
take care of it.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This introduces a new compatible for the A64 SRAM C1 section, that is
compatible with the SRAM C1 section as found on the A10.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This introduces new bindings for the H5 SoC in the SRAM controller.
Because the SRAM layout is different from other SoCs, no backward
compatibility is assumed with any of them.
However, the C1 SRAM section alone looks similar to previous SoCs,
so it is compatible with the initial A10 binding.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Allwinner ARMv5 F1C100s has similar watchdog timer to sun6i A31.
Add definition for it.
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The suniv ARMv5 F1C100s chip has similar sram controller to sun4i A10.
Add compatible string for it.
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Add the clock input of the main clock controller
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the clock inputs of amlogic AO clock controller
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The GPCv2 on the Freescale i.MX8MQ SoC works in the same way as the
GPCv2 on the i.MX7, but only controls more power domains with a
different mapping.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move trivial RTCs to the rtc generic binding documentation as they all also
support at least 'start-year'.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull input updates from Dmitry Torokhov:
"Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: omap-keypad - fix keyboard debounce configuration
Input: xpad - quirk all PDP Xbox One gamepads
Input: synaptics - enable SMBus for HP 15-ay000
Input: synaptics - add PNP ID for ThinkPad P50 to SMBus
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR
Input: elan_i2c - add support for ELAN0621 touchpad
Input: hyper-v - fix wakeup from suspend-to-idle
Input: atkbd - clean up indentation issue
Input: st1232 - convert to SPDX identifiers
Input: migor_ts - convert to SPDX identifiers
Input: dt-bindings - fix a typo in file input-reset.txt
Input: cros_ec_keyb - fix button/switch capability reports
Input: elan_i2c - add ELAN0620 to the ACPI table
Input: matrix_keypad - check for errors from of_get_named_gpio()
* Fix llcc license, includes, and error checks
* Remove use of memcpy in cmd-db and fix API breakage
* Add QCS404 compatible to SMD-RPM
* Minor fixes for QMI
* Add irq clear handling in QCOM Geni SE during init
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJcAHmCAAoJEFKiBbHx2RXVJLwQAKXbtYh7Kl8xQPJpRtHmOTJE
zagPkIb9xDqG2O7rWfYi6ye3/brSZv+9kv02tqwtHVlDfxtd64KHw3jor6yxozB4
6d8F1thFiM5+lXo6ISSFJaVYwpN0AYCExFLbSup/XSyo3a70HchtXlvT0NPPTecT
EXinXUDOizVM8SypZksoWfJWd+qWskPNxfMRQZ1e5nJlnqcRD/9XQtmZha/WZe76
Kz78QfxLbT4KKhTEE+TAOWERT2STlxfHP0611E00LXlivqh7twtfe5u5yUntOVq0
+56RY1K0W++Cl4P2HJrpcp+16OI2wPG1KfP4kWySXaa0HfcW4qaZvGGiOWrr1mQs
sxRntblg0x56i4lnSTFxTrirDBiBFuzXLvLGE/RxbgACGafVh0mEtl58wJxwShKB
a3zaztuRPcimOWbcAJN2O3nOB64lYha61JY7lo+th+IxbYAaVtp76GsVq36DHDbx
oVREMg/zNUHRKqIQuRM372sj2VnngJ8Bw/7ecLTwydvmmb7QB6UDXI1D/L2p6Tqq
+7Z1UHB8XIWhu2GkLjakEHs+XPcUULofWeNSsOwftv2Bmo4xw9COlQiDQjf15/ZR
IVZp1tYFHR9v2mFMM1ZI/GdQWSl4EDE3rwvwRMlCHcEZYN4jjyv9XzV2IeMw7Tpq
qdevDn4scHx05nBm6ZQh
=hySS
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Qualcomm ARM Based Driver Updates for v4.21
* Fix llcc license, includes, and error checks
* Remove use of memcpy in cmd-db and fix API breakage
* Add QCS404 compatible to SMD-RPM
* Minor fixes for QMI
* Add irq clear handling in QCOM Geni SE during init
* tag 'qcom-drivers-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
drm: msm: Check cmd_db_read_aux_data() for failure
soc: qcom: smd-rpm: Add QCS404 compatible
soc: qcom: llcc-slice: Remove duplicated include from llcc-slice.c
soc: qcom: cmd-db: Stop memcpy()ing in cmd_db_read_aux_data()
soc: qcom: cmd-db: Remove memcpy()ing from cmd_db_get_header()
soc: qcom: Drop help text for QCOM_QMI_HELPERS
soc: qcom: qmi_interface: Limit txn ids to U16_MAX
soc: qcom: llcc-slice: Add error checks for API functions
soc: qcom/llcc: add MODULE_LICENSE tag
soc: qcom: Add irq clear handling during SE init
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.21, please pull the following:
- Rafal relicenses a bunch of DTS files he wrote under the GPL 2.0+/MIT
license and adds proper SPDX license tags in the process
- Rene adds support for the Linksys EA6500 v2 Wi-Fi router based on
BCM4708 plus two BCM4360 and BCM4331 radios
- Phil documents and updates the vchiq mailbox compatible string in
order to establish a correct agreement between the Raspberry Pi
firmware and the ARM CPU's view of what an ARM CPU cache line size is,
he also fixes the mailbox "reg" property to be correctly expressed in
bytes
- Stefan updates the Raspberry Pi Zero DTS files to use SPDX tags
- Florian enables the SATA PHY and AHCI controller on the BCM63138 SoCs,
he also does a bit of refactoring of aliases for the Northstar Plus
DTS files
-----BEGIN PGP SIGNATURE-----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=kE/p
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.21, please pull the following:
- Rafal relicenses a bunch of DTS files he wrote under the GPL 2.0+/MIT
license and adds proper SPDX license tags in the process
- Rene adds support for the Linksys EA6500 v2 Wi-Fi router based on
BCM4708 plus two BCM4360 and BCM4331 radios
- Phil documents and updates the vchiq mailbox compatible string in
order to establish a correct agreement between the Raspberry Pi
firmware and the ARM CPU's view of what an ARM CPU cache line size is,
he also fixes the mailbox "reg" property to be correctly expressed in
bytes
- Stefan updates the Raspberry Pi Zero DTS files to use SPDX tags
- Florian enables the SATA PHY and AHCI controller on the BCM63138 SoCs,
he also does a bit of refactoring of aliases for the Northstar Plus
DTS files
* tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Describe Northstar pins mux controller
ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
ARM: dts: bcm283x: Correct mailbox register sizes
ARM: dts: bcm283x: Correct vchiq compatible string
dt-bindings: soc: Document "brcm,bcm2836-vchiq"
ARM: dts: NSP: Move aliases to bcm-nsp.dtsi
ARM: dts: BCM53573: Relicense SoC file to the GPL 2.0+ / MIT
ARM: dts: BCM63xx: Enable SATA AHCI and PHY for BCM963138DVT
ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
ARM: dts: BCM53573: Relicense Tenda AC9 file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47081/BCM4709 files to the GPL 2.0+ / MIT
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX7ULP Clock functions are under joint control of the System
Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
modules, and Core Mode Controller (CMC)1 blocks
Note IMX7ULP has two clock domains: M4 and A7. This binding doc
is only for A7 clock domain.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcBW/HAAoJEAhfPr2O5OEVr1YP/Rggag8uQS365rYzRlau1tQY
VeCuYsmW4IZTRLk7IgLctRDJ6XShwnwpWJCfo8Uvf0LHk1q1dxPyJMZ/ycNujG/B
AxAZlURF4Kqx1iMaG8thwJt5LqT2yzpas34mmSvX7Xxa9FnV7tb3FyadclVW3tjL
Dg8P/6ryY2I0UtzzFGtepXoWz0G76xNEjPqpyVMzjQzzpdmtX1GX/ObtmnjkNQmS
qFRTJ+TFL4i61vdmz64ReVHJ5yMXo32wOxbYtSB7xiU8ZZvRrrD//Z5/15QUIz3p
rQO2zUsnUaqMFx3qdnMRYY//BYo/WVTATIxOeAEjOyinc3Op03IRV4FYGTlb9mqG
RLnhl6PAxN2En9KQBBSunaf9/iJtjSH1EWyAfrAM1gUsYQmnSmFf0P+EogNMCbbR
hZGCzp9nr35OZ02g5XroMZ4DlqqGDqY6uvbeH7fm7eCDQ67O2yPynPzSWYBbymP4
q/vIrxIBAQRq/3PGO4kgwUn+d6T8B3O1GnufPLJvHAoXHfDZ32ahlv6JcKN0qf0q
IYyCXW0m2rTmkZRkmmkFmCUx0T8U4jen9pFEd6iRVAp3hrU9mgdv90R7Cjn7w/KC
A0S1EcCUOiz7mt20U0fypWt0oyj6se8ltLy0wyNd/TePuFJfJ4n7pnC3rFojHCyN
ejprmuE8ft9DC6W6hIrP
=44JZ
-----END PGP SIGNATURE-----
Merge tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- Revert a dt-bindings patch whose driver didn't make for 4.20
- fix a kernel oops at vicodec driver
- fix a frame overflow at gspca with was causing regressions on some
cameras, making them to not work
- use the proper type for wait_queue head
- make media request API compatible with 32-bit userspace on 64-bit
kernel
- fix a regression on Kernel 4.19 at dvb-pll
- don't use SPDX headers yet for GFDL
* tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediactl docs: Fix licensing message
media: dvb-pll: don't re-validate tuner frequencies
media: dvb-pll: fix tuner frequency ranges
media: Revert "media: dt-bindings: Document the Rockchip VPU bindings"
media: gspca: fix frame overflow error
media: vicodec: fix memchr() kernel oops
media: cedrus: add action item to the TODO
media: media-request: Add compat ioctl
media: Use wait_queue_head_t for media_request
This patchset adds an optional VCC regulator to the bindings of the Sony
CXD2880 DVB-T2/T tuner + demodulator adapter.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This adds the binding for the i.MX8MQ Clock Controller Module.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add device tree bindings for Low Power Audio subsystem clock controller for
Qualcomm Technology Inc's SDM845 SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add protected-clocks list which could used to specify the clocks to be
bypassed on certain devices.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The example should follow the practice or using a generic node name
instead of the precise programming model, as recommended by the DTSpec.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the bindings for I2C-based OCC hwmon device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document the bindings for the FSI-attached POWER9 On-Chip Controller.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm127x are hot-swap controllers that allow a circuit board to be removed from
or inserted into a live backplane. This patch adds the device tree
bindings documentation.
Signed-off-by: Kun Yi <kunyi@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch adds the device tree binding documentation for the ad2s90
resolver-to-digital converter.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Few SoC related driver changes to add PRCM as the wake-up source
for wkup_m3_ipc driver, and to improve ti-sysc driver for dra7
mcasp and device detection when debug is enabled.
There is also a non-critical fix for ti-sysc to fix handling of
the optional clocks but this can wait for the merge window no problem.
-----BEGIN PGP SIGNATURE-----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=n5+4
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.21/driver-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
Driver changes for omaps for v4.21 merge window
Few SoC related driver changes to add PRCM as the wake-up source
for wkup_m3_ipc driver, and to improve ti-sysc driver for dra7
mcasp and device detection when debug is enabled.
There is also a non-critical fix for ti-sysc to fix handling of
the optional clocks but this can wait for the merge window no problem.
* tag 'omap-for-v4.21/driver-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
soc: ti: wkup_m3: Add PRCM int16 as the wake up source
bus: ti-sysc: Detect devices for debug on omap5
bus: ti-sysc: Add mcasp optional clocks flag
bus: ti-sysc: Fix getting optional clocks in clock_roles
Signed-off-by: Olof Johansson <olof@lixom.net>
- support more timers on meson8
- add the stdout-path property on several boards
-----BEGIN PGP SIGNATURE-----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=9yK+
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic 32-bit DT updates for v4.21
- support more timers on meson8
- add the stdout-path property on several boards
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson: add the clock inputs for the Meson timer
ARM: dts: meson: add the TIMER B/C/D interrupts
ARM: dts: meson: consistently disable pin bias
ARM: dts: meson8b: mxq: add the /chosen/stdout-path property
ARM: dts: meson8: minix-neo-x8: add the /chosen/stdout-path property
ARM: dts: meson6: atv1200: add the /chosen/stdout-path property
dt-bindings: timer: meson6_timer: document the clock inputs
dt-bindings: timer: meson6_timer: document all interrupts
Signed-off-by: Olof Johansson <olof@lixom.net>
The timer needs the timer clock to be enabled, otherwise it stops
ticking.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
for all Gru devices, rk3399 spi dma properties, some improvements for
the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the
emmc on the rock64 and declaring all cpu cores in the cooling maps
instead of just cpu0.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlv2ni0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgeaVB/4vKlFs9CKs+oj7Wi5+UoSbsBReHqAuENVm
6ShgnA15nCVaOzo3RT1ck8hHjKpAcTfX1siwmCK9OETwyxXI5vQCbKz3EIkoQYCQ
WIyyqlTs6Ars67ZSxJSPgitj8kguzEfJo7T+mOhhQK0nWS1jjJRmdtMcsYXqJbMg
OYj35cG4zRVFIQg87kQnVC3rkBu5Pb4LhY8J8+Ft2NUlRbUHBC08zgxe7oZLlTrt
AIquFnEdhjSz0KxeN66wtvEyMT1e36qTjW8/iu3YQOIaxFoIcxCtrXIfxplFId6o
f01Yu86wjfANQYIRzZLRV2GsLIlYpdiGk/aCQnSb6xgB4bcXiZQ9
=WIig
-----END PGP SIGNATURE-----
Merge tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
New dts for Gru-Scarlet (tablet device), default backlight brightness
for all Gru devices, rk3399 spi dma properties, some improvements for
the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the
emmc on the rock64 and declaring all cpu cores in the cooling maps
instead of just cpu0.
* tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add all CPUs in cooling maps
arm64: dts: rockchip: add Gru Scarlet devicetrees
arm64: dts: rockchip: move backlight from rk3399 sapphire to excavator
arm64: dts: rockchip: Use default brightness table for rk3399-gru
arm64: dts: rockchip: add chosen node on rk3399-sapphire
arm64: dts: rockchip: enable HS200 for eMMC on rock64
arm64: dts: rockchip: add fan on rk3399-sapphire board
arm64: dts: rockchip: add rk3399 SPI DMAs
Signed-off-by: Olof Johansson <olof@lixom.net>
Here are some small USB and PHY driver fixes for 4.20-rc5
Nothing big at all, just the usual handful of USB fixes for reported
issues, along with some gadget and PHY driver bug fixes.
All of these have been in linux-next with no reported issues.
Note, the USB gadget fixes were in linux-next on its own branch, not in
mine, it just got merged into here yesterday and missed linux-next of
today.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXAFfLg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn4OwCg1rMrW+r4+OeehFi2wR7wxxP0f1QAnRj/djtD
w3+dT6m3PanQE40d1zi5
=HsrT
-----END PGP SIGNATURE-----
Merge tag 'usb-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY driver fixes from Greg KH:
"Here are some small USB and PHY driver fixes for 4.20-rc5
Nothing big at all, just the usual handful of USB fixes for reported
issues, along with some gadget and PHY driver bug fixes.
All of these have been in linux-next with no reported issues. Note,
the USB gadget fixes were in linux-next on its own branch, not in
mine, it just got merged into here yesterday and missed linux-next of
today"
* tag 'usb-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: u_ether: fix unsafe list iteration
USB: omap_udc: fix rejection of out transfers when DMA is used
USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
USB: omap_udc: fix omap_udc_start() on 15xx machines
USB: omap_udc: fix crashes on probe error and module removal
USB: omap_udc: use devm_request_irq()
usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series
USB: usb-storage: Add new IDs to ums-realtek
Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"
phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845
phy: qcom-qusb2: Use HSTX_TRIM fused value as is
dt-bindings: phy-qcom-qmp: Fix several mistakes from prior commits
phy: uniphier-pcie: Depend on HAS_IOMEM
The #reset-cells was listed as optional in the bindings for
qcom,sdm845-videocc. There's no reason for it to be optional. As per
Stephen [1]:
> We should update the binding to make it a required property. It
> doesn't make any sense why that property would be optional given
> that the hardware either has support for resets or it doesn't.
sdm845 support is still in its infancy so we shouldn't be affecting
any real device trees by modifying the bindings here.
[1] https://lkml.kernel.org/r/154330186815.88331.12720647562079303842@swboyd.mtv.corp.google.com
Fixes: 84b66b2116 ("dt-bindings: clock: Introduce QCOM Video clock bindings")
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch adds the binding documentation for apmixedsys, infracfg,
pciesys, pericfg, topckgen, ethsys, sgmiisys and ssusbsys for MT7629.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add bindings documentation for the Phicomm N1.
Signed-off-by: He Yangxuan <yangxuan8282@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
PHICOMM Co., Ltd. is a hardware provider headquartered in Shanghai, it's
product includes router and smart devices.
Signed-off-by: He Yangxuan <yangxuan8282@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
amlogic,meson-gxbb-scpi-sensors is both the driver and DT but is not
documented. Just add it to amlogic's scpi documentation
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEENrCndlB/VnAEWuH5k9IU1zQoZfEFAlv+uhcTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCT0hTXNChl8Q67B/4k/6WVMEssFStSEpC9asrqQs0Itra3
+eIiXrzGfpzO/Gg1O4LV2xUt7JzgLgRa8BBPH8wk+Q/QMOYZsP0qkocb2SWI+J31
JfJGa50l+Beyj8UdeLqZRt62cKCQIBXRaZ4O12ugGYNeQotFsSg4bFa1Gk9aW8Ke
YZT2zYTgD1yaQpBnUcbwnzJEf58vVjgH8zocpm40hlqsUKOJeHoAqUfyfj5RPioX
w9HAc/nDmsHAt32O650poJ851RK2dMNDTSKtUxKTH+nPI7HzdB5HXvlPFpHAf2SC
BrPYUJIOJGPLzhfTRTwAFCfM5C8/y/FtR0GD9vEctVDjSIrcH72aOnre
=NA7B
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-4.21-20181128' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
This is a pull request for net-next/master consisting of 18 patches.
The first patch is by Colin Ian King and fixes the spelling in the ucan
driver.
The next three patches target the xilinx driver. YueHaibing's patch
fixes the return type of ndo_start_xmit function. Two patches by
Shubhrajyoti Datta add support for the CAN FD 2.0 controllers.
Flavio Suligoi's patch for the sja1000 driver add support for the ASEM
CAN raw hardware.
Wolfram Sang's and Kuninori Morimoto's patches switch the rcar driver to
use SPDX license identifiers.
The remaining 111 patches improve the flexcan driver. Pankaj Bansal's
patch enables the driver in Kconfig on all architectures with IOMEM
support. The next four patches by me fix indention, add missing
parentheses and comments. Aisheng Dong's patches add self wake support
and document it in the DT bindings. The remaining patches by Pankaj
Bansal first fix the loopback support and prepare the driver for the
CAN-FD support needed for the LX2160A SoC. The actual CAN-FD support
will be added in a later patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflict in net/core/filter.c, a locally computed
'sdif' is now an argument to the function.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a compatible for the rpm on the Qualcomm QCS404 platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The Amlogic Meson SoCs embeds a clock measurer IP to measure the internal
clock paths frequencies.
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlv7H/seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhasH/AvNibkzTAPQR7jE
r/R7NIaFUdPpaHYpLpoYIdSWkqpeWtN3q4eldJKWcpFCaE83EzDVu1PRw79rt/lm
JIYbZ2SZWbTB7d2TLEiEF2bFXr+OF8MVc1tSAsP5xTMvV6mIz7+i2xr9R0D4YrKY
ejd+ExF3HimuRf557Uey1MGsRIhedHsHjHbWjvR1MuKzvUv9nAL+1E2KJbfPXacp
LGXElCYcPXoKw+GxMS7C28idgLoEJoS/eVieRiMGsGlgEe/MuaNMU+GRLMde9lI0
c/G/4uumJTHVY7npOjuNt1+2FoLVt8oLlhPcB06R7FIwJN+TupLQifqBkIe2saT6
R6ExonQ=
=+/RR
-----END PGP SIGNATURE-----
Merge v4.20-rc4 into drm-next
Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In the bindings that landed for the gpucc we require that the XO clock
(one possible parent of the gpucc) be listed. The code doesn't use
this yet--this is just to allow us to move toward the day when it does
use it. What the code does do today is to hardcode the parent name to
"bi_tcxo". That's all well and good.
...but the example in the bindings shows this clock mapping to the
clock "xo_board". On the current sdm845.dtsi file the "xo_board"
clock is a fixed clock with an output name of "xo_board". The clock
with the name "bi_tcxo" is actually provided by the RPMh Clock
Controller. Presumably that's the one that was wanted.
Let's update the example to make this clearer.
Fixes: e431c92188 ("dt-bindings: clock: Introduce QCOM Graphics clock bindings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
A few driver specific fixes here, nothing big or that stands out for
anyone other than the driver users.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlv+uFQTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GN/B/9rkzlaRTNvBepsN3qbDfFotIt2+9T0
as4tDY5t+C6PWHkKaqezTuKzin+fSOpSQ9n8rx2yc9oddwpelDsqLVxUlxRuN+RB
C+UBfls7rP3J8AlYaGFor+N+MjiRuWVpfYW0PbFf1kM8l1fmOP7FC7BB76G1Ketu
3U9DSWeL5YMZq+IIXI3e77f3luq4/bo2DVxNMQ/PL/frbpRIqOVYag5kGFRxYYez
7rcAo68mOCv/85xdqNZ5u2m+xO/fpSYV+CGFXbYvGPizFIGl9REnw+8DE7EVSCo7
xsPsMuj/bE0Gr3frPguZ0XFsOyFB+SVxqMQxQt2zKiEDuLtQYTFmhs9h
=kDIQ
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes here, nothing big or that stands out for
anyone other than the driver users.
The omap2-mcspi fix is for issues that started showing up with a
change in defconfig in this release to make cpuidle get turned on by
default"
* tag 'spi-fix-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: Add missing suspend and resume calls
spi: mediatek: use correct mata->xfer_len when in fifo transfer
spi: uniphier: fix incorrect property items
The FlexCAN controller can parse the stop mode property to enable CAN
self wakeup feature.
Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The PMC can be a top-level interrupt controller that provides the top-
level controls for wake events. Add optional properties to mark the PMC
as interrupt controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add compatible string and new attributes to support the Xilinx CAN
FD 2.0.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
On startup, applications such as PulseAudio or CRAS enable playback or
capture on all PCM devices to verify that configurations are correct,
and close them immediately. For DMICs, this can result in the clock
being turned off very quickly, which may not compatible with internal
state machine transition requirements.
This patch add a mode-switch delay which will prevent the clock from
being turned off without complying with manufacturer timing
specifications. While the DMIC clock may be controlled at a lower level,
be it with hardware or firmware, applying the delay during the
STOP_TRIGGER phase ensures that there is no race condition, e.g. with
the hardware/firmware turning off the clock earlier
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
McPDM module receives it's functional clock from external source. This
clock is the pdmclk provided by the twl6040 audio IC. If the clock is not
available all register accesses to McPDM fails and the module is not
operational.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The CMA node has a unit address, but no reg property which generates a
warning in DTC. Change the node name to reflect its usage and drop the unit
address.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The dismod property can be used to specify the drive on level of inactive
TX slots.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The thermal controller implementation on Tegra194 is very similar to the
implementation on Tegra186. Add a compatible string for the new
generation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
We need the gsps fixes in here for some other serdev patches we will be
merging into this branch.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document support for the IIC code for the r8a77990 (R-Car E3).
It is not considered compatible with existing fallback bindings
due to the documented absence of automatic transmission registers.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Append optional bindings to update SYSCFG Fast Mode Plus bits if
Fast Mode Plus speed is selected.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This patch adds a DT binding documentation for the MT7629 soc.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a Device Tree binding for the Intel Stratix10 SoC FPGA manager.
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a device tree binding for the Intel Stratix10 service layer driver
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now, the Socionext vendor directory is available at
Documentation/devicetree/bindings/arm/socionext/
Move cache-uniphier.txt over to it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Document the list of SoCs and boards of UniPhier platform.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
commit da48a6eb82 ("ASoC: rsnd: add SSIU BUSIF support for
Document") updated Documentation for SSIU, but 1) we want to
keep old/deprecated DMA description, 2) it is missing SSIU
subnode properties. This patch tidyup these
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The sub-nodes should not be called gpio-controller, but simply gpio.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rather than gpio1-gpio11 for pms405, there are 12 GPIOs for pms405.
But gpio1, gpio9 and gpio10 are not available. Fix the bindings doc
to make it correct for pms405.
Fixes: ed80f6eb79 ("dt-bindings: pinctrl: qcom-pmic-gpio: Add pms405 support")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
*) Fix updating HSTX_TRIM tuning parameter in qcom-qusb2 PHY driver
*) Fix inconsistencies between dt-bindings and the driver
*) Add "Depend on HAS_IOMEM" uniphier-pcie to avoid randconfig errors
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----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=wXaJ
-----END PGP SIGNATURE-----
Merge tag 'phy-for-4.20-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 4.20-rc
*) Fix updating HSTX_TRIM tuning parameter in qcom-qusb2 PHY driver
*) Fix inconsistencies between dt-bindings and the driver
*) Add "Depend on HAS_IOMEM" uniphier-pcie to avoid randconfig errors
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-4.20-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy:
phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845
phy: qcom-qusb2: Use HSTX_TRIM fused value as is
dt-bindings: phy-qcom-qmp: Fix several mistakes from prior commits
phy: uniphier-pcie: Depend on HAS_IOMEM
DWC_usb31 peripheral v1.70a-ea06 and prior needs a SW workaround for
isoc START TRANSFER command failure. However, some affected versions may
have RTL patches to fix this without a SW workaround. Add this quirk to
disable the SW workaround when it is not needed.
Synopsys STAR 9001202023: Wrong microframe number for isochronous IN
endpoints.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Add an option to disable USB2 LPM from host. There maybe cases where the
user does not want to enable USB2 LPM (e.g. USB2 LPM is broken).
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
- Fix VIN (Video IN) versioned groups on R-Car V2H, H3, and M3-W,
- Add I2C[0-3], DU1, VIN, QSPI1, and SDHI pin groups on RZ/G1C,
- Add audio, SDHI, VIN, HSCIF, and CAN(FD) support on R-Car E3,
- Add QSPI pin groups on R-Car V3M and V3H,
- Add VIN and CAN(FD) pin groups on R-Car M3-N,
- Add I2C[035] pin groups on R-Car H3 and M3-W,
- Add pinctrl and GPIO support for the new RZ/A2M (R7S9210) SoC,
- Small cleanups,
- Maintainership updates.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCW/fATQAKCRCKwlD9ZEnx
cEcRAPoCtfqfL82fb4Yj6zTrwD8dpy2TVpRYT95YRNuPegcWZwEAxpv4bUNVAMQJ
Wj6GYkhMTuGBaaUJzNGJclD7u7nJcgc=
=YGuc
-----END PGP SIGNATURE-----
Merge tag 'sh-pfc-for-v4.21-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: sh-pfc: Updates for v4.21
- Fix VIN (Video IN) versioned groups on R-Car V2H, H3, and M3-W,
- Add I2C[0-3], DU1, VIN, QSPI1, and SDHI pin groups on RZ/G1C,
- Add audio, SDHI, VIN, HSCIF, and CAN(FD) support on R-Car E3,
- Add QSPI pin groups on R-Car V3M and V3H,
- Add VIN and CAN(FD) pin groups on R-Car M3-N,
- Add I2C[035] pin groups on R-Car H3 and M3-W,
- Add pinctrl and GPIO support for the new RZ/A2M (R7S9210) SoC,
- Small cleanups,
- Maintainership updates.
This patch adds device tree documentation for the Microchip
MCP41xxx/42xxx family of digital potentiometers.
Signed-off-by: Chris Coffey <cmc@babblebit.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
