mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 16:59:48 +07:00
a5c4c29d24
20231 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Gregory CLEMENT
|
a5c4c29d24 |
ARM: dts: at91: Remove the USB EP child node
The endpoint configuration used to be stored in the device tree, however the configuration depend on the "version" of the controller itself. Then the EP child node are useless and describe as deprecated in the documentation binding: remove all the nodes from the SoC device tree file. Remove also the #address-cells and #size-cells properties that are no longer needed. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> |
||
|
Linus Torvalds
|
7adc4b3999 |
ARM: SoC fixes
A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I found after restarting my randconfig build testing that had been dormant for a while. On the Nokia N950/N9 phone, a DT fix is required to address a boot regression. For the bcm283x (Raspberry Pi), two DT fixes address minor issues. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6hsLwACgkQmmx57+YA GNmL2hAAsbdQcEkAX/y/dSyCU3rg9qxwAGzpjshewEboLy6Sh4LWShraJ2o8snH6 EAGVOb8O6giB09DLL9WOCEoVK6nHan98BBEDUvPLobdXkv+zrmva6QHKYHX1y2cs TpV/2klyOJn1HHtLzioONbc37FtFEdW4DVf/2WH12u9hGUOLat5ULIeXtakrj9xy iL/BuLcYW396ZGTTFa1XkLeCqzRvtkAqoMtZIjr2hXTi/IkgkIUZRatIRu54pKYo VNiwY9BnCJknl+QmPkavmm9qdZhmJU4cxFX+wnu7Sh45Xflw9J14J16wBe/BZWO+ joOtpak+sF+kYPnS5Uv9Ie3dalo98w0CBYf40x2dznnqMyOJtPPbLhwjf3jzcLhk dUVHra14vaWMtPCHg/PDTBjtxu2SaLWcELqn3hek/Zwr09zUgelyTquTAoHkXzgF ApYtT8ym04y9uirFf1Cg59bBxmIoC85I4l487ly0SQtU7vE4piSM2KI+jnp3zn+3 +7TC85UYhtqNu7asYLAN6PcOOg+p4jpRyW/SK3dSoJw1f839fKji77aeEnIAEWxN Qb4qJHYL+9Xy47mjJjH3TarRo7QulGiAgZV21uOrZecDiM8bMpDGtRXTqAW8yfsb awDLmGvBaYb+xN/cc3X73inhXct48OLvz5GKRYLtIOzQFxAu/cM= =K1jH -----END PGP SIGNATURE----- Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I found after restarting my randconfig build testing that had been dormant for a while. On the Nokia N950/N9 phone, a DT fix is required to address a boot regression. For the bcm283x (Raspberry Pi), two DT fixes address minor issues" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: imx8: select SOC_BUS soc: tegra: fix tegra_pmc_get_suspend_mode definition soc: fsl: dpio: avoid stack usage warning soc: fsl: dpio: fix incorrect pointer conversions ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y ARM: dts: bcm283x: Disable dsi0 node firmware: xilinx: make firmware_debugfs_root static drivers: soc: xilinx: fix firmware driver Kconfig dependency ARM: dts: bcm283x: Add cells encoding format to firmware bus ARM: dts: OMAP3: disable RNG on N950/N9 |
||
|
Arnd Bergmann
|
f42ae4cd4c |
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.7, please pull the following: - Nicolas provides a fix for |
||
|
Arnd Bergmann
|
d6b0a5b3ab |
Boot regression fix for N950/N9
We need to tag RNG as disabled for N950/N9 as it blocked by the secure mode. We have a similar change done for N900, but I missed adding it for N950/N9 with the recent RNG changes. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl5+YFQRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXMQDRAAh5iWHOvPNJD5qNOguNrAfFslrSZ0q4gA IKPJuDh1/5aZEE3oJpBrA5QnDps8hmSZkzYmGJQgHgjk1PXY21tq0Pp8nMz7bt9l BGQIuUSmr3ZuI+8eciFv7Mg1eDPuyZZqWCQTcsqrketYNA4tql6vPt5SFwDf0L7R OQz5e/llye70UKD1HaUboM6FPERFRTLXeSNjJUd1uprGQCOR847jpSRjGk9t2nIP +FrMNPHtF8X4mxVpx8nIoeREG/o6z72K23I0GuVDy6+A00HHsFN8J0EdDTRCad7p bgb+MFvc25Pepx1qhggsQlKlKMbVIB21pNODCyfRlUSaiNCIbkoBLqkgzlDGaaKM lll9IJ3+6ZJ1Qy2TgO3ZVIZk8L6O8GPOFsCd8XpqrzHB/M2I4XO50BeZqroOeU/J hnNtlj+RfoAPZ9rCzYa5wAJLGYhakapFqmVtIJpie3FA1u1TPlebG6GBattT8156 1FpXdHvY8Yovy5vs7fQxQfY4/YGLEt3NPLW/CEoIe2PqRrn+ta5knQrljILk35L6 eW4jaGNeuR69ievRNQgV1mrP4MP+C6RK8qPScpkSH0wPfTE0Rc2d906FwyQtfc3g 6OaikzEjVfSpLFac6vKr0Vl6LGFGaUxJtnrOX6oHcbS14sjEeHmlyPloNX0WFSvh tYVpEwqtl5k= =HJcs -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.6/fixes-rc7-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Boot regression fix for N950/N9 We need to tag RNG as disabled for N950/N9 as it blocked by the secure mode. We have a similar change done for N900, but I missed adding it for N950/N9 with the recent RNG changes. * tag 'omap-for-v5.6/fixes-rc7-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: OMAP3: disable RNG on N950/N9 Link: https://lore.kernel.org/r/pull-1585340588-558327@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Nicolas Saenz Julienne
|
90444b9584 |
ARM: dts: bcm283x: Disable dsi0 node
Since its inception the module was meant to be disabled by default, but
the original commit failed to add the relevant property.
Fixes:
|
||
|
Florian Fainelli
|
0f2167d53c |
This patch is to be squashed into 55c7c06210 ("ARM: dts: bcm283x: Fix
vc4's firmware bus DMA limitations") as it turned out to be faulty
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEErOkkGDHCg2EbPcGjlfZmHno8x/4FAl5+ZSAACgkQlfZmHno8
x/7fWQf/SODT8sooJto4VFAbsDjXjNPmkqXBvFxYcPVN67ET2pSFdiGpGV4/Zt0+
/f1/niWVvOXL8j4MicEjhQeRwRCznzBHb07PW33ynf6i7u+b3eGr/gbfFckbpSsV
FhN5/5rcH7ebnsekGRG3c0386IGtRZW3xE4Dk2wLcRv3qhgs98y+U8s5vGlaxXG6
KAim6SUlh+FZak58CcVovBUe30HpX9vxuuHUk8mzhhrDEbZqDY2VW4VkhcagnAc8
y6X0mriyv6EoJdDzPQtlq94c/siNKIEbrJ/E5ozUU3ZNAs4nu2KIoru0lhXgaNl9
rMnHqEKCCF1/8gXeN1+t2DHXBfVvkA==
=/iN4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gRon
-----END PGP SIGNATURE-----
Merge tag 'tags/bcm2835-dt-fixes-2020-03-27' into devicetree/fixes
This patch is to be squashed into
|
||
|
Martin Fuzzey
|
be8ae92f5c |
ARM: dts: imx6: add fec gpr property.
This is required for wake on lan on i.MX6 Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Martin Fuzzey
|
4141f1a40f |
ARM: dts: imx6: Use gpc for FEC interrupt controller to fix wake on LAN.
In order to wake from suspend by ethernet magic packets the GPC
must be used as intc does not have wakeup functionality.
But the FEC DT node currently uses interrupt-extended,
specificying intc, thus breaking WoL.
This problem is probably fallout from the stacked domain conversion
as intc used to chain to GPC.
So replace "interrupts-extended" by "interrupts" to use the default
parent which is GPC.
Fixes:
|
||
|
Linus Torvalds
|
854e80bcfd |
ARM: devicetree updates for v5.7
Most of the commits are for additional hardware support and minor fixes
for existing machines for all the usual platforms: qcom, amlogic, at91,
gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip,
exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap,
and versatile.
The conversion of binding files to machine-readable yaml format
continues, along with fixes found during the validation.
Andre Przywara takes over maintainership for the old Calxeda Highbank
platform and provides a number of updates.
The OMAP2+ platforms see a continued move from platform data into
dts files, for many devices that relied on a mix of auxiliary data
in addition to the DT description
A moderate number of new SoCs and machines are added, here is a full
list:
- Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
(SM8250) is the current high-end phone chip, and IPQ6018 is a new
WiFi-6 router chip.
- Mediatek MT8516 application processor SoC for voice assistants, along
with the "pumpkin" development board
- NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
evaluation board.
- Kontron "sl28" board family based on NXP LS1028A
- Eleven variations of the new i.MX6 TechNexion Pico board, combining
the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
SoM carriers
- Three additional variants of the Toradex Colibri board family, all
based on versions of the NXP i.MX7.
- The Pinebook Pro laptop based on Rockchip RK3399
- Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on
the ST-Ericsson u8500 platform
- DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
STMicroelectronics stm32mp157
- Renesas M3ULCB starter kit for R-Car M3-W+
- Hoperun HiHope development board with Renesas RZ/G2M
- Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64
- Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20
- PocketBook Touch Lux 3 ebook reader, based on Allwinner A13
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=ye2F
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"Most of the commits are for additional hardware support and minor
fixes for existing machines for all the usual platforms: qcom,
amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
sunxi, broadcom, omap, and versatile.
The conversion of binding files to machine-readable yaml format
continues, along with fixes found during the validation. Andre
Przywara takes over maintainership for the old Calxeda Highbank
platform and provides a number of updates.
The OMAP2+ platforms see a continued move from platform data into dts
files, for many devices that relied on a mix of auxiliary data in
addition to the DT description
A moderate number of new SoCs and machines are added, here is a full
list:
- Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
(SM8250) is the current high-end phone chip, and IPQ6018 is a new
WiFi-6 router chip.
- Mediatek MT8516 application processor SoC for voice assistants,
along with the "pumpkin" development board
- NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
evaluation board.
- Kontron "sl28" board family based on NXP LS1028A
- Eleven variations of the new i.MX6 TechNexion Pico board, combining
the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
SoM carriers
- Three additional variants of the Toradex Colibri board family, all
based on versions of the NXP i.MX7.
- The Pinebook Pro laptop based on Rockchip RK3399
- Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
on the ST-Ericsson u8500 platform
- DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
STMicroelectronics stm32mp157
- Renesas M3ULCB starter kit for R-Car M3-W+
- Hoperun HiHope development board with Renesas RZ/G2M
- Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
A64
- Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
A20
- PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"
* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
ARM: dts: ux500: Fix missing node renames
arm64: dts: Revert "specify console via command line"
MAINTAINERS: Update Calxeda Highbank maintainership
arm: dts: calxeda: Group port-phys and sgpio-gpio items
arm: dts: calxeda: Fix interrupt grouping
arm: dts: calxeda: Provide UART clock
arm: dts: calxeda: Basic DT file fixes
arm64: dts: specify console via command line
ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
ARM: dts: gemini: Add thermal zone to DIR-685
ARM: dts: gemini: Rename IDE nodes
ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
arm64: dts: khadas-vim3: add SPIFC controller node
...
|
||
|
Arnd Bergmann
|
8bdbf16908 |
Merge branch 'arm/late' into arm/dt
Include originally "late" updates for OMAP and Qualcomm, now that it's not late any more. * arm/late: (122 commits) ARM: OMAP2+: Drop legacy platform data for ti81xx edma ARM: dts: Configure interconnect target module for ti816x edma ARM: dts: Configure interconnect target module for dm814x tptc3 ARM: dts: Configure interconnect target module for dm814x tptc2 ARM: dts: Configure interconnect target module for dm814x tptc1 ARM: dts: Configure interconnect target module for dm814x tptc0 ARM: dts: Configure interconnect target module for dm814x tpcc ARM: OMAP2+: Drop legacy platform data for dm814x cpsw ARM: dts: Configure interconnect target module for dm814x cpsw clk: ti: Fix dm814x clkctrl for ethernet arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware arm64: dts: sdm845: add IPA information arm64: dts: qcom: db845c: add analog audio support arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s arm64: dts: qcom: c630: Enable audio support arm64: dts: qcom: sdm845: add apr nodes arm64: dts: qcom: sdm845: add slimbus nodes arm64: dts: qcom: sc7180: Update reg names for SDHC arm64: dts: qcom: qcs404: Enable CQE support for eMMC arm64: dts: msm8916: Add fastrpc node ... |
||
|
Linus Torvalds
|
bef7b2a7be |
Devicetree updates for v5.7:
- Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl6GTJUQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw8vaD/9HDT0EEDRdfr8s5OiLHYQMSXlSExJgR+ON iLI4v19apWwyycil176RXuWL5fFxh9HHOKbxOL27mmfqSLdv/xe/ev6Z4oNLVZzm YiUalm37K+R9yWsWTqxJKtQxWqSBBtOlyJmUYnvxI1bjfF4PANKF+IMpQVDflj1w 9UMixoPRFdlOoMXVmC7yT0sfE1B6REJIh0Qfa4pqDwnHRhs8imgoIYA+JwFnmFPr k5Q8xS2YCwopH/7W5aRLzyEI2dF6Rfy9FID8jfyNoKZLtBW6cIEkA4zTv41BZSuj 4Zj2etELXAnkIWMZXXdeKSz8IoSOlgjsCR482QmzTRuoFdmVLoJgsgh9hO2+oK07 vJDEVJnXKxq1pF6DVbYwuzNgPB1pRzg6Y8EitdH3SBgjsOQ/m4RpKaqN0MkQhYrB BI9PCiF7GKCzNfNl3b/Op+HSsZ6aJkOsQPzC89/Ww0mB8azypgAwvLsjte5R3hib fS8z+V+lxAAC0/M981TsPKJ96HNv4VXbLI3bY9qJBd2LB+NDortsF/OkUuObsh+6 hVQCWnae5V5iq8WmMTFABfBAK5lHafop87edn6X33LOyZZQCT9svNz/zrpakXh0e /SBGTUudtjCOy/BLj1VQrb6tczEzos7Ij+bszeIBAcSzrWg8gtVPjw9TvuAo2b/b 9nwR4yrm0Q== =db/l -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ... |
||
|
Linus Torvalds
|
29d9f30d4c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
|
||
|
Linus Torvalds
|
1f944f976d |
TTY/Serial patches for 5.7-rc1
Here is the big set of TTY / Serial patches for 5.7-rc1 Lots of console fixups and reworking in here, serial core tweaks (doesn't that ever get old, why are we still creating new serial devices?), serial driver updates, line-protocol driver updates, and some vt cleanups and fixes included in here as well. All have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHT8w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yl3CwCgj/97IKb4K49nV2rDgiV+t/ELWqUAnjBp+Zpd H2BEdhwCFhq/5CJHKXWH =JTm1 -----END PGP SIGNATURE----- Merge tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big set of TTY / Serial patches for 5.7-rc1 Lots of console fixups and reworking in here, serial core tweaks (doesn't that ever get old, why are we still creating new serial devices?), serial driver updates, line-protocol driver updates, and some vt cleanups and fixes included in here as well. All have been in linux-next with no reported issues" * tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits) serial: 8250: Optimize irq enable after console write serial: 8250: Fix rs485 delay after console write vt: vt_ioctl: fix use-after-free in vt_in_use() vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console tty: serial: make SERIAL_SPRD depend on COMMON_CLK tty: serial: fsl_lpuart: fix return value checking tty: serial: fsl_lpuart: move dma_request_chan() ARM: dts: tango4: Make /serial compatible with ns16550a ARM: dts: mmp*: Make the serial ports compatible with xscale-uart ARM: dts: mmp*: Fix serial port names ARM: dts: mmp2-brownstone: Don't redeclare phandle references ARM: dts: pxa*: Make the serial ports compatible with xscale-uart ARM: dts: pxa*: Fix serial port names ARM: dts: pxa*: Don't redeclare phandle references serial: omap: drop unused dt-bindings header serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete() serial: 8250: 8250_omap: Account for data in flight during DMA teardown ... |
||
|
Linus Torvalds
|
db34c5ffee |
USB / PHY patches for 5.7-rc1
Here are the big set of USB and PHY driver patches for 5.7-rc1. Nothing huge here, some new PHY drivers, loads of USB gadget fixes and updates, xhci updates, usb-serial driver updates and new device ids, and other minor things. Full details in the shortlog. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHL9w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymz6wCcDwDTZouXj+0B37q+kwlCQQPyLukAn2CxKfrM d+wScRHWoZutA8IdzqaU =5+jn -----END PGP SIGNATURE----- Merge tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY updates from Greg KH: "Here are the big set of USB and PHY driver patches for 5.7-rc1. Nothing huge here, some new PHY drivers, loads of USB gadget fixes and updates, xhci updates, usb-serial driver updates and new device ids, and other minor things. Full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (239 commits) USB: cdc-acm: restore capability check order usb: cdns3: make signed 1 bit bitfields unsigned usb: gadget: fsl: remove unused variable 'driver_desc' usb: gadget: f_fs: Fix use after free issue as part of queue failure usb: typec: Correct the documentation for typec_cable_put() USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback USB: serial: option: add Wistron Neweb D19Q1 USB: serial: option: add BroadMobi BM806U USB: serial: option: add support for ASKEY WWHC050 usb: core: Add ACPI support for USB interface devices driver core: platform: Reimplement devm_platform_ioremap_resource usb: dwc2: convert to devm_platform_get_and_ioremap_resource usb: host: hisilicon: convert to devm_platform_get_and_ioremap_resource usb: host: xhci-plat: convert to devm_platform_get_and_ioremap_resource drivers: provide devm_platform_get_and_ioremap_resource() phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters phy: qcom-qusb2: Add generic QUSB2 V2 PHY support dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180 ... |
||
|
Philippe Schenker
|
1b68480b94 |
ARM: dts: apalis-imx6qdl: use rgmii-id instead of rgmii
Until now a PHY-fixup in mach-imx set our rgmii timing correctly. For the PHY KSZ9131 there is no PHY-fixup in mach-imx. To support this PHY too, use rgmii-id. For the now used KSZ9031 nothing will change, as rgmii-id is only implemented and supported by the KSZ9131. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Nicolas Saenz Julienne
|
be08d278eb |
ARM: dts: bcm283x: Add cells encoding format to firmware bus
With the introduction of |
||
|
Linus Walleij
|
fdd41faca6 |
ARM: dts: ux500: Fix missing node renames
I renamed the dsi-nodes from dsi@ to dsi-controller@ so that the schema check would kick in, but missed to rename it in a few places. Link: https://lore.kernel.org/r/20200326222536.86441-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Aaro Koskinen
|
07bdc492cf |
ARM: dts: OMAP3: disable RNG on N950/N9
Like on N900, we cannot access RNG directly on N950/N9. Mark it disabled in
the DTS to allow kernel to boot.
Fixes:
|
||
|
Arnd Bergmann
|
7c7642383a |
Drop remaining legacy platform data for cpsw and edma
With a non-critical clock fix for dm814x ethernet, we can update ti81xx for cpsw ethernet and edma to probe them with ti-sysc interconnect target module driver and device tree data. And we can drop the related remaining platform data for cpsw and edma. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl5xBPcRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXOsxhAAvtgT0UIuOSI+W+Pxrp2Vh2+Y9VIpJQ/V VCgiQfTxb99+4djiH63+/8h57V3StRCaE8wug3sFZoSqCnHQmrYWnTgGYKX0AsGv omOk+s7Rjw9aV9DsP1J4Vp4Am18dqL17NPiykht2jUMBenA6t9ltGP93huHau8CP KkF9hc1TC73JeS+kZZXgqXFsWVkWeMFkdYJBetdvaY6hljtnxuIx/3ZDNmX16Vio fB/En0xvCyjt7szLNwhdrvr/eteP4ZNywDrAI8SolvljqvaVf6VemMW/xeKRJOcE hpRmTrN5azh/GR7yIW+NIIauYM0AxuIAQ9NW9pBjRVAF6YZMeBdAVhXXxROC//pp qCzzP6h3QEtG9YlNqhxqTk4EAQ2WeHZCs6kMJHOh2vLn04my3f7o6x7djFP2W9Mk ZKoOMIsMknvPskW7QCb2epmepxW2mFqZ/AOLo3zq7j5KFR+cx9yPbwq9gzY52W94 bPHIIQAk6j+S9KHl+94YB9L6mN6LJRrMzmETBLfmrBimfZceESFvT9lWW4QC38Nr rPVPNkHVnuFb2+kv1g6StKq4drpo2b5KNNc6uVYzwJ+FgVoZoACt5hvEakwUO8Kt U/lNrh2pPtk/Hjet1Us5JypvMOZWF0vHC7DmFSER/2jYJ+KAVm3umxrsMbz/fg2y kvlcO8poZjk= =EDSy -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late Drop remaining legacy platform data for cpsw and edma With a non-critical clock fix for dm814x ethernet, we can update ti81xx for cpsw ethernet and edma to probe them with ti-sysc interconnect target module driver and device tree data. And we can drop the related remaining platform data for cpsw and edma. * tag 'omap-for-v5.7/ti-sysc-drop-pdata-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Drop legacy platform data for ti81xx edma ARM: dts: Configure interconnect target module for ti816x edma ARM: dts: Configure interconnect target module for dm814x tptc3 ARM: dts: Configure interconnect target module for dm814x tptc2 ARM: dts: Configure interconnect target module for dm814x tptc1 ARM: dts: Configure interconnect target module for dm814x tptc0 ARM: dts: Configure interconnect target module for dm814x tpcc ARM: OMAP2+: Drop legacy platform data for dm814x cpsw ARM: dts: Configure interconnect target module for dm814x cpsw clk: ti: Fix dm814x clkctrl for ethernet Link: https://lore.kernel.org/r/pull-1584575307-189595@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
e6dfccb710 |
Drop legacy platform data for omaps for v5.7
This series of changes continues dropping legacy platform data for omaps by updating devices to probe with ti-sysc interconnect target module driver: - Update omap4, omap5, am437x, and dra7 display subsystem (DSS) to probe with device tree data only - Update am335x, am437x and dra7 to probe EDMA to probe with device tree data only - Drop legacy platform data for am335x and am437x PRUSS as the current code just keeps the devices in reset - Drop legacy platform data for omap4 DSP and IPU as the current code just keeps the devices in reset - Configure am437x and dra7 PRU-ICSS to probe with device tree data For the dropped omap4 DSP and IPU platform data, there will be patches coming later on to configure the accelerators using the omap remoteproc bindings so hopefully folks can actually use these devices eventually. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl5nwYURHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXNknBAAoxZgT7vx2BwsG0lpjbFrhBXIm9gQoCxC fFiMRLX4PdEtMSzyHooszuBVJN/AzFb/dY43psccKZnwkigfAduiB/9Gn9Nw/Cwf yLsaWiaUUfM6c1iQqv6HDV6fKal55emRZ/6RSfUlUMIyCcMRxg0NR8mSju3+uN9O qGK2Ksxp4sRdG+m2KylNMB7MDSSHxKEsAmEMHlAQNOF6+O0m+AoDLN39XCY50XS+ 2aUbcbyXbIK0lNSkbVOLf+UPZECIs7sy1qc02/OtG5i29z+0lJ/7men4R7gWIXRN m7P0OPFlo8GyMKDcSfWDvw7UC2bNGvQKDisW4AfN3CjnlxD67S/F/bMbS8SK3Nec vev/BmcMrhq4kEeTS+syUdLKwc8JI5dmrP/dhOBGwh1fdfoOrL2heG4ntLkMYX9r SeEcSY3ixbr+/oClM61lbxV1TCro5oTzvWhYipf8KJiuXQD8ggEyeoO+0VAqK7Xq LHdH+fEP2J72hXPdStUir6hJq1Fm1LClD9f0FPNWVj54xJtlHRYto/rKC7H3KzBJ +KncyaFuUmOCDgt0bDqiTV7PXfURzqDERW6YL2UYpHGgQ0CqeBE89MGEKHU5Xzno i8PrTFDLM9Icej8LIuD65CvFzAMFg5Hxu0bD7JDXh+Vmox5aHiQCPCLYD5oK3d/e Z/tllQbJpIM= =QqzI -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late Drop legacy platform data for omaps for v5.7 This series of changes continues dropping legacy platform data for omaps by updating devices to probe with ti-sysc interconnect target module driver: - Update omap4, omap5, am437x, and dra7 display subsystem (DSS) to probe with device tree data only - Update am335x, am437x and dra7 to probe EDMA to probe with device tree data only - Drop legacy platform data for am335x and am437x PRUSS as the current code just keeps the devices in reset - Drop legacy platform data for omap4 DSP and IPU as the current code just keeps the devices in reset - Configure am437x and dra7 PRU-ICSS to probe with device tree data For the dropped omap4 DSP and IPU platform data, there will be patches coming later on to configure the accelerators using the omap remoteproc bindings so hopefully folks can actually use these devices eventually. * tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (56 commits) ARM: OMAP2+: Drop legacy platform data for dra7 edma ARM: OMAP2+: Drop legacy platform data for am3 and am4 edma ARM: dts: Configure interconnect target module for dra7 tptc1 ARM: dts: Configure interconnect target module for dra7 tptc0 ARM: dts: Configure interconnect target module for dra7 tpcc ARM: dts: Configure interconnect target module for am4 tptc2 ARM: dts: Configure interconnect target module for am4 tptc1 ARM: dts: Configure interconnect target module for am4 tptc0 ARM: dts: Configure interconnect target module for am4 tpcc ARM: dts: Configure interconnect target module for am3 tptc2 ARM: dts: Configure interconnect target module for am3 tptc1 ARM: dts: Configure interconnect target module for am3 tptc0 ARM: dts: Configure interconnect target module for am3 tpcc ARM: dts: dra7: Add PRU-ICSS interconnect target-module nodes ARM: dts: AM4372: Add the PRU-ICSS interconnect target-module node ARM: dts: AM33xx-l4: Update PRUSS interconnect target-module node ARM: OMAP2+: Drop legacy platform data for am437x DSS ARM: OMAP2+: Drop legacy platform data for dra7 DSS ARM: OMAP2+: Drop legacy platform data for omap5 DSS ARM: OMAP2+: Drop legacy platform data for omap4 dss ... Link: https://lore.kernel.org/r/pull-1583858385-416921@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Andre Przywara
|
820a037845 |
arm: dts: calxeda: Group port-phys and sgpio-gpio items
For proper bindings checks we need to properly group the port-phys and sgpio-gpio items, so that they match the expected number of items. Link: https://lore.kernel.org/r/20200228135106.220620-5-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Andre Przywara
|
7a375c900c |
arm: dts: calxeda: Fix interrupt grouping
Currently multiple interrupts for some devices are written as one array instead of using the DT grouping notation (<0 42 4>, <0 23 4>). This ends up in the same binary representation in the .dtb, but is semantically not equivalent. The yaml schema checks will stumble over this, so lets fix that first. I refrained from using the symbolic names for GIC_SPI/GIC_PPI and IRQ_TYPE_LEVEL_HIGH, mostly because it increases the delta between the original DTS files and the mainline versions, so it's just additional churn. Link: https://lore.kernel.org/r/20200228135106.220620-4-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Andre Przywara
|
0f1321172e |
arm: dts: calxeda: Provide UART clock
The PL011 UART binding requires two clocks to be named in a node. Add the second clock, which is the bus gate, that just gets enabled. Since this is a fixed clock anyway, it doesn't make any difference. Link: https://lore.kernel.org/r/20200228135106.220620-3-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Andre Przywara
|
28c05e4223 |
arm: dts: calxeda: Basic DT file fixes
The .dts files for the Calxeda machines are quite old, so carry some sloppy mistakes that the DT schema checker will complain about. Fix those issues, they should not have any effect on functionality. Link: https://lore.kernel.org/r/20200228135106.220620-2-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
b7e31b639e |
Qualcomm ARM dts updates for v5.7
This adds Bluetooth support on Nexus 5, USB on Xperia Z1 and defines gpio-ranges throughout the various gpio-controllers. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl5xpGUbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FPNUQALMV/qh54J3eHFrqfNDv rGWO2jpYXKftCHeg46DQ/Mi8nswZHNqa7zGbFvIlooVHZFELfKs4bAU8ndgDa+gj DCSXZO7SoUmn5Vd+WfkKzqsPOP2tPK8eTyQPNTdyKHPqi9q+8zA93fJOZuqg2lRE CdQiEpg+y1WuKCJriXK0Qwtxe066DpyGM4I72vQhTf/f9Sv1ltCuqNhRMxw8gpjM wR5LhZC9fAmUGPUt4QTHgzygkHvou+mRKCfQi1cRbWBnN9+aKgnBMi+JwuKrarT7 gsP9Ja1g9YlKCXSVIEpjVYWM+bovyMRvy79InZd1BQW5+pAZlE+rH5zOXd6rU1Ks 9JBiWGESy6McEo1TFi8APMUddGnYktwWAtMeHWrVFAczbU6hdnrhcediKR7Mer/y UTu7U1kwvqOcZ0F85kXNnpqYteno3cG/J2J5BVc03k0lb2DxnkMuO1lQtROLjkuI fqo84xtG2hpuJkKFVcJbG8GewniC3Xy52esPf5bnzkw1kU4HGS/hvpEg+mIWlBbT 5+l9wE1pBm0hEbT4GyIIXmBaEKGe4PfVGhZiaxY8P6d7RyjF3iHiaITQ6UzBbBBH NKNJVk7AtFRFqpfLQVhPCf/yi7qh6pzOeTtBKTq+wEzUHsk7GVRXrglAIsk1YTuf qclhE/zuP7xngMAcscUoEBdg =1cGm -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for v5.7 This adds Bluetooth support on Nexus 5, USB on Xperia Z1 and defines gpio-ranges throughout the various gpio-controllers. * tag 'qcom-dts-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add gpio-ranges property ARM: dts: qcom: msm8974-hammerhead: add support for bluetooth ARM: dts: qcom: msm8974: add blsp2_uart10 ARM: dts: qcom: msm8974-honami: Add USB node. Link: https://lore.kernel.org/r/20200318044305.GE470201@yoga Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
9742c5e1c5 |
SoCFPGA DTS updates for v5.7, part 2
- Add ptp_ref clock to ethernet nodes for Arria10 -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAl57gIkUHGRpbmd1eWVu QGtlcm5lbC5vcmcACgkQGZQEC4GjKPSltw//bPjSOoT+JY5Aeus68WuTOYP/0F6c ds1OVMxLScbrnZ2YGJYoV9Bys35L9zIYnI2XnUUAaFuQvw9yQ2a0RbFv4obg8Y8C E+UoLTMp6YWAZZxDST5NXNBeppyAjN0RkFFR1SC7wKCb/EXhH/WCEYX4N6gp93Uj WN8k2CTw0FDO2H1XSCiiLVULuCH+PIBDHc6ZRDx/ekeyE1Ez1hkTrdaLLPmeVNSv ptEhEEgelm7MCUZwQTJb1+TF7q4h4zyBVegCc7spKsFIcRfbtAH9tvEkbHR0SAeR g9UKtOmXFJUJEI4KEUbboaVGte3SGMsfnrHxN0k4gZwR4Ox9qQaxv11HWbuv3a6Q aPj1bFzJJrnYmXkCpc+dlBO7ITs/zmFUwOJCtES0bW3NTrxf/z9qQJkw4q8y7KKm 9eTswJBR5KHDx/YeArTvOEbXzJtEEu9iax0Hnd8xI43taFyobY7PTGO/G4rjteuX THgKyJ2X4QXEXEgqj8iQPJuwTQVMD5bfvLgy57FGP5a4xBHwrpqok9VavWHSpIRb izOdiy2wLf21m3ch9Iiq0C3zR2RFR8VoW9W9oXf3qa6QQw0EmMP3xfN/MJUZQhqD e6E32pMs/2IkS1gf8Ukl3OuNKCkfjGSWTbudghIfdZ2A11aH5KapTZIE0rN68qpA lO5KYOU2YHXHR1k= =3xkv -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_update_for_v5.7_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.7, part 2 - Add ptp_ref clock to ethernet nodes for Arria10 * tag 'socfpga_dts_update_for_v5.7_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes Link: https://lore.kernel.org/r/20200325160745.793-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
47a4e43779 |
AT91 DT for 5.7
- Enable watchdog on sam9x60 - Correct sama5d4/2 RTC compatibles - Add i2c gpio pinctrl to allow i2c recovery -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl53JrcACgkQ2wIijOdR NOXoww//d1W+D+j+9DDW/RDph8GIxZOXFO+wSFMppee3+38ui9JqVJz4AFdNUhTq gQ/gKkFcnPulA0nW/JuQGD8Z+UDd4fjYP3atrKdR1qGlVvC+Ccm6Ws5TNzXVtoTF YJj8Mz8vtxwfp69gLz0fsY6S/PGZJtgniiHm1VtoEzFGyvn7wrTa7OOxWdpLn/kI UZ7SdLlxWUWy6eTRJvPtTn40ehpCFi2xY68vL88fZ9PKgI5eX0UPBIqhAUATzDKC lg3YIXn0keC6XP9a2PTSEfS0PdP7f851wCY66RNJ1VzlkEbfclhgnCW9/YYmPqRw EQlKJcYczoZgtF1mlBTqZeCW229lK2UMAAyRkWy+ZaMG9yaviUausv+QqyYIlHMN qf8NfpKeP1aTf3OAoq4+/7OHVOihPSvQ6kh7Ab4fVWPwUPV3wnc7DR9MxpkE64Sz lKlFt6kznxNMsXLWsxz4t0am6d5rE1NTvqT0EPEHDhZljITWHXUE74aoQFnLK/a9 y3j738zaeYJ3yBkSDA+aPwda5IG5+y2x/aq8sikQmn0orl/A2SdqjvcH2/IQqgZH a3vgAyOoL5b/6uTiLqDzeWgnQCmGjCzucgWp4YFAe8j9Ix/UwMy0L0BCgr1OFEmu nCxKn5huXdQPAX8WyixpHXmrxgAo6VUUxsEaWragavLzccWvIwo= =PcrY -----END PGP SIGNATURE----- Merge tag 'at91-5.7-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.7 - Enable watchdog on sam9x60 - Correct sama5d4/2 RTC compatibles - Add i2c gpio pinctrl to allow i2c recovery * tag 'at91-5.7-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: at91: sama5d2: add i2c gpio pinctrl ARM: dts: at91: sama5d4: add i2c gpio pinctrl ARM: dts: at91: sama5d3: add i2c gpio pinctrl ARM: dts: at91: sama5d4: use correct rtc compatible ARM: dts: at91: sama5d2: use correct rtc compatible ARM: dts: at91: sam9x60ek: enable watchdog node ARM: dts: at91: sam9x60: add watchdog node ARM: dts: at91: Kill off "simple-panel" compatibles Link: https://lore.kernel.org/r/20200322085931.GA208770@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
eec05449eb |
Gemini DTS changes for v5.7:
- Rename the IDE nodes to match the YAML schema - Add a temperature zone to the DIR-685, use hard drive as sensor and cool the case using the fan. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl51Qf4ACgkQQRCzN7AZ XXOCuQ//V2YDq/C1Xlq3+ffUoAvdXV4iiJHjdpASkCfrUA97AJYD8beHkZ3GMJI+ yYpclrvr1yfVeI5X9zGKKJ81driivFDUx0wmVzb9OMw1AiQHIIbKznqpA6UWCzsj 2mZlILSPLZs9BixLLiE72PP7xWb3xkycT/s6TOuY8IzpweMuhFtsS4Z/YqYyWODI UNIrRUG6LPhCkPngfqAkl0EzCvp9mqcus/fiBBm0RSwEUP4V5k26JpGTmW2ZCbOS Opxw97xKMzHHhhAIOGoV0cDpYXZ/dCBwPXA7oNKXXXSrv78oVoB9+A31nEBks73o IC+XPT+V1LGsgQksXv1bIrtTrRqIa+ay1oAB+cMnVNCJ9q/Ya4fIenYjvikjExvY P9NLZKuYRL1jxlzscL+X7hEDUszzSLkrl/Od8X8D4J8Dt0saPfvM09nlfnOY4ZxM bBiNB9mwZZTeHZH09cGkBK0e+j1NCmue8jDXy4X//u0bQqAue/gncRwLh7t9p1YP 92l11vJuhZOHs3DeLnqLK6ynzLuyf7lPBop2FsBYN17UyR1BnlG2TWC+60hikpt1 aG0At5MwGzCurcwRPtUEBmD1TsNgZPvKbM+UusldpsK1Wx0mV8bJwgf4dXHLx9Ap 67CchCbdTvRsmufoTyZouGGSx+WQp0GPBPdZ2rd4iLgoqqXztCs= =/Tw7 -----END PGP SIGNATURE----- Merge tag 'gemini-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini DTS changes for v5.7: - Rename the IDE nodes to match the YAML schema - Add a temperature zone to the DIR-685, use hard drive as sensor and cool the case using the fan. * tag 'gemini-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes Link: https://lore.kernel.org/r/CACRpkdbvgqCVuoMCHJrCZ0J+3NrwdrBnwBz+BJrSE=hqYh2j+Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
21a3c5dd23 |
- Rename scpsys nodes to power-controller.
- Add PWM node to MT7629 SoC -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl50pJcXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH6DXhAAnlivhRR5ybMTDrF0LVzEIaD0 s5JWNSLZXYp/k/KwlE/8wtL7l65we1ezb/W2R9kRskh4wdX4wJ88URukyA17PNFv /sapYD8esZ/b/37MJDR0xPuKBIcEgiVAHFA+m/h8gd+5yt0UdJmr7vPvfD2y8L8Z nHQC0Xggy2y0Eyq0kXfbdIVeD+KiZej0DIo+dGgg/GW1Xt9c+ACFF8JjOkcIRGcJ 7ntrggla4uKNIwfb3hEzKUtnccEM9g6FbwxXGwJKfAWwAStGbFgxcyGbRtMG/NmV IJ7IM/z9U4mKU2oRyBRhJh4A02aWL9zpUVxkLm4Al8uKZkAXv7yMhO9IeLuzOuuS arMhDzEz+v+6M/h7y+8IA3AjZw0PNkEjkE8ptyfJrGG8qo3nvppSQp1YbpL2Vpct xma4Hcw57nWm6HE/BAiRxDRmJUUtyYX+5AsP2VQop1NF8uNJgNgBuBqphn+jDRzn TcUrdVGZo+aO23rLu8K1uJT/HVZ6B6CtuZmGrd4Ek1qckqFeC7jyzr5quSHXp0Qx WDz31gi+l1YH2DbPChzAbKjESds0fR3Syu4LyXNmtkGu9QcEsjDgJ1dZQRdkH1lA tzkp9eGfL4YbEa/ZHiQPcHxi5d9Sqwacqi0SmJBYnL9EfXmfWXKnXbYsiZXoWlyn XkOVMkMISjGIvwkxJAQ= =fYiW -----END PGP SIGNATURE----- Merge tag 'v5.6-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt - Rename scpsys nodes to power-controller. - Add PWM node to MT7629 SoC * tag 'v5.6-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: ARM: dts: mediatek: add mt7629 pwm support ARM: dts: mediatek: rename scpsys nodes to power-controller Link: https://lore.kernel.org/r/b454c6b2-656e-2261-7688-f7f2773189cf@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
c1cf2b3d63 |
SoCFPGA DTS updates for v5.7
- Increase NAND boot partition for Arria10 - Increase QSPI partition for Stratix10 and Agilex -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAl5yNPIUHGRpbmd1eWVu QGtlcm5lbC5vcmcACgkQGZQEC4GjKPS+iA/+PS/wMnI7KJzapUlwas5pQ7kIiyI6 VZCKI3FJC4EqT2mSGhsoLi2wRbA5uIg+qIRKA/r/mXNZ1kVMg+5ksQFe1ZGH4uN8 nDvBj2SJ0FfsvsPYNJUHdzgy3AoPOKHyhuOQnibv5v75xhIAztcVWpid3Dc1b/XV cSoMa3A39or9ze+yF98WvSCyxyYgxd55F6fEkIxf7a/ZmrtbYLRN2Nskp9dMhVel y2mHGNJEuh//gowugWdTmXn2nNHkw21vDLi0R9VlWOHGGmSA+GteNbGd8fw5I/SI UKkONlUOS98rf40DtI724cFQsn+8tn3WGo8VEq7CgkV9r9Hamc6D+qEetAEOKDYD pFLGKsDjYjMDQMDAKcNFhX6zwKmI4+HFT0MQ++JoK4Xt8Hpv7x5kGYapNfBYyKgC oVlYhg801D5Ptm2bGYsjalX1dCfWkyHtZscC1DF5tNIn1VbU7OJxMhNHGS+hpNrs ItTT6sCyJk3NoMKCC7L6ATjRdwK4vo25KM64PScYe7liwu1pZ2umI/KIiUna0dUj EISEgwmjxuSboEDOdpKUkg9PRPms+/6b2D4eFutv1+rB5lESJ3CL/oADYMxAyHeV 9h0xYUvwxOpj+6G4n3lBpYDaeqRHqq4T2QuiFZUNq1eMrzfzr6QEcBCY+UPDEAiJ e5XTWItGgvQhSl4= =ukkU -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_update_for_v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.7 - Increase NAND boot partition for Arria10 - Increase QSPI partition for Stratix10 and Agilex * tag 'socfpga_dts_update_for_v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: increase the QSPI reg address for Stratix10 and Agilex ARM: dts: socfpga: arria10: Increase boot partition size for NAND Link: https://lore.kernel.org/r/20200318145957.30338-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
968313378b |
i.MX arm DTS changes for 5.7:
- New support for i.MX6/7 based PICO devices and Toradex i.MX7 based
Aster boards.
- Add voltage monitor device node for vf610-zii boards.
- Improve UART pins macro defines for i.MX6SX SoC and switch related
boards to use the new names.
- Use generic node name for devices like GPT, KPP, CCM, WDOG, OCOTP and
IOMUXC in i.MX DTS files.
- Switch imx6ul-pico device tree to DRM bindings.
- Use SPDX-License-Identifier for all Toradex i.MX6/7 based boards.
- Add proper rgmii PHY description for imx6dl-riotboard and
imx6q-marsboard.
- Add capture-subsystem device support for i.MX51.
- Kill off "simple-panel" compatibles which has never been an accepted
as an upstream compatible string.
- Random device addition to various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl5xkLsUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5UZwgAh4EMxfFHTvfIO3Pobcax9qTnwQfX
A1cNE5VcZFhIt93FHV9H4k/rd/28v1QArs18X2PsdYk9NChzmEXSH1fPUQj7aMxT
NnDMDrkPaVGezWZbtoUEcpYr9sCxS6c0eMXq/VI2TTZS0pWPTzBBtsyqWiPbx3ZN
4h12SjS8T3M81VI90En1QStFAlg0YnDXYdEHNS3c/0rBcXLenkfPMlAeBJw6Rti2
9simCtJEDYnJpN77JUfFz8Lkm1bc7np4Fr56diKOrOmCeXD9VQ/qyy/KyBu99oRN
SL404Y7ACFc1OG9MMTkCKrbSCCQqa5ZseNyvV7PJEZImZ3XNb59+ICidRQ==
=42du
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm DTS changes for 5.7:
- New support for i.MX6/7 based PICO devices and Toradex i.MX7 based
Aster boards.
- Add voltage monitor device node for vf610-zii boards.
- Improve UART pins macro defines for i.MX6SX SoC and switch related
boards to use the new names.
- Use generic node name for devices like GPT, KPP, CCM, WDOG, OCOTP and
IOMUXC in i.MX DTS files.
- Switch imx6ul-pico device tree to DRM bindings.
- Use SPDX-License-Identifier for all Toradex i.MX6/7 based boards.
- Add proper rgmii PHY description for imx6dl-riotboard and
imx6q-marsboard.
- Add capture-subsystem device support for i.MX51.
- Kill off "simple-panel" compatibles which has never been an accepted
as an upstream compatible string.
- Random device addition to various boards.
* tag 'imx-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (55 commits)
ARM: dts: imx6q-marsboard: properly define rgmii PHY
ARM: dts: imx6dl-riotboard: properly define rgmii PHY
ARM: dts: imx51-zii-rdu1: set name prefix for TPA6130A2
ARM: dts: imx6: RDU2: assign video PLL as input to LDB
ARM: dts: vf: toradex: SPDX tags and copyright cleanup
ARM: dts: imx7: toradex: use SPDX-License-Identifier
ARM: dts: imx6: toradex: use SPDX-License-Identifier
ARM: dts: imx51: add capture-subsystem device
ARM: dts: imx: add nvmem property for cpu0
ARM: dts: imx6qdl: Add imx6qdl-pico support
ARM: dts: imx6ul-pico: Add support for the dwarf baseboard
ARM: dts: imx7d-pico: Add support for the nymph baseboard
ARM: dts: imx7d-pico: Add support for the dwarf baseboard
ARM: dts: imx23: introduce mmc0_sck_cfg
ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7
ARM: dts: imx: align name for crypto node and child nodes
ARM: dts: imx6qdl-gw5910: add CC1352 UART
ARM: dts: imx6qdl-sr-som-ti: indicate powering off wifi is safe
ARM: dts: imx6: phycore-som: add da9062 gpio support
ARM: dts: imx6: phycore-som: explicit disable pmic watchdog during suspend
...
Link: https://lore.kernel.org/r/20200318051918.32579-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
c354f77ba4 |
UniPhier ARM SoC DT updates for v5.7
- Rename nodes to avoid dt-schema warnings - Add a generic compatible to EEPROM so that it matches OF table - Add USB controller nodes to Pro5 SoC - Fix clock and reset of SPI nodes -----BEGIN PGP SIGNATURE----- iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl5xBVMeHHlhbWFkYS5t YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsGImYP/i/iwslPTSeha2U0 j1HJIgd0LhSW/bdn4HoA1yJGPRWHy2n0/1cwccT6bZAVhpPzBdzY76A49bYKLoa3 hP0ye0hiihcLxOhxQXflSmRt/9xMOx0/n2akxvd97YBq9XakRDUgOuaThJhEPhWk 0u//IUgpmoYPII5r4J5plD51MYjUP+QiPdnB3CeaFbBeghKGKIqJSPDon4hP17Dl uxuKljVI3HRX8mLMYTvc/Pc+A32RjuEvwEaiMo5yHCy0sGGuWfNfMEcbTw7WyF9K PCLSE/pnxaD3yXh90U6Ea6e197EVjSATrblrlUunWL/R4nlQo/4o3cUYskmtsSTW aVrVFmhFlbK1bYma3dzSNSc+bzg3dy9N/Bqu7ugKNYGKvjKdOuddxXshWu2AceSj YNDmKUaPXNGscfs468ChArBLPW/FEU/gS+osB5PK74NOGbsaZfPBHo0G59WrrVBk 7rFAea5W06nA+PkK/c3b7K9fyHPdtty67sbSKOuaBAJ6ofPU/JrlGhzmoHrtJ7AS XU5ckltBjf32XLIvFYK/2b8rEm8/lW/OZljtaq8JG/qopXQS6fdzOkpduq+M6LZi +l4US6yK7aUqmnJzl4RAcjdZl6me9sew7ZFaeeU++1kk6BVebwIicjwMuAdaBCH5 ZiYF2zeXwZrYN1aiS+2EAhUi/nS+ =posG -----END PGP SIGNATURE----- Merge tag 'uniphier-dt-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM SoC DT updates for v5.7 - Rename nodes to avoid dt-schema warnings - Add a generic compatible to EEPROM so that it matches OF table - Add USB controller nodes to Pro5 SoC - Fix clock and reset of SPI nodes * tag 'uniphier-dt-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: Set SCSSI clock and reset IDs for each channel ARM: dts: uniphier: Add USB3 controller nodes for Pro5 ARM: dts: uniphier: Add one more generic compatible string for I2C EEPROM ARM: dts: uniphier: rename cache controller nodes to follow json-schema ARM: dts: uniphier: rename NAND node names to follow json-schema ARM: dts: uniphier: rename aidet node names to follow json-schema ARM: dts: uniphier: change SD/eMMC node names to follow json-schema Link: https://lore.kernel.org/r/CAK7LNAQ-AOTyqpV1E_S-hksjqexHfVauwGV9rrfDvjRVnu8-UQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
20d9c47b80 |
Improvements for the rk3288-vyasa board and a lot of cleanups from
verifying devicetrees against new yaml bindings. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl5wGrUQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgbQlB/4gnc0k38dtyEjnMGhSzD+4b0/jwFwlIGnr dDWH2BdH73ddXEJMmTe87COfIYV6UtYIKBqNKuqSrS2QkKqteq8VY91fWIQYs8sT x5HpGQjcIi7T/L7mt6mQB4/2yGlhigrquMjDIJBRJcqHGixdAskNBN82H2bxqWJc o03fL95kCxCU6K8n84RfmgnSsfn+TosV38F7G+QtLdFeFaA3rNi7Pdf0+vglqu1G UNtXKJrmehe9CT5rXVdQ/xY1iNKX8vvcBgsORi2EjnP0o7EYT+3TmVMc90cwC0u0 cVEx9bwKwdeNoR8Xx4XMTfWulJIjklvJxl23flyT6Wvs0b6p0FPN =Aygp -----END PGP SIGNATURE----- Merge tag 'v5.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Improvements for the rk3288-vyasa board and a lot of cleanups from verifying devicetrees against new yaml bindings. * tag 'v5.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (25 commits) ARM: dts: rockchip: remove #address-cells and #size-cells from i2s nodes ARM: dts: rockchip: swap clocks and clock-names values for i2s nodes ARM: dts: rockchip: remove clock-names property from 'generic-ohci' nodes ARM: dts: rockchip: remove clock-names property from 'generic-ehci' nodes ARM: dts: rockchip: swap clocks and clock-names values for spdif nodes ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during reboot ARM: dts: rockchip: remove clock-frequency from saradc node rv1108 ARM: dts: rockchip: fix vref-supply for &saradc node rk3288 firefly reload ARM: dts: rockchip: use DMA channels for UARTs for RK3288 ARM: dts: rockchip: rk3xxx: fix L2 cache-controller nodename ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc ARM: dts: add bus to rockchip amba nodenames ARM: dts: rockchip: remove #dma-cells from dma client nodes for rv1108 ARM: dts: rockchip: fix rockchip,default-sample-phase property names ARM: dts: rockchip: fix vqmmc-supply property name for rk3188-bqedison2qc dt-bindings: arm: add Rockchip rk3036-evb board dt-bindings: arm: fix Rockchip Kylin board bindings ARM: dts: rockchip: add missing model properties ARM: dts: rockchip: Add vcc50_hdmi for rk3288-vyasa ARM: dts: rockchip: Fix ddc-i2c-bus for rk3288-vyasa ... Link: https://lore.kernel.org/r/7846023.TtVhTo4ACP@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
e4a78fd21a |
Samsung DTS ARM changes for v5.7
1. Various fixes: - Reboot of some Odroid Exynos4412-based boards, - MMC regulators on Arndale5250, - Memory mapping on Artik5, - GPU power domain on Exynos542x boards, - LCD SPI polarity on UniversalC210, 2. Add thermal cooling of GPU on Odroid XU3/XU4 family, 3. Add dynamic-power-coefficient to Exynos5422 for energy model. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl5vu5cQHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD19b+D/9qtEMSHaQWJjciRPY6rPCSonFE4AqIoIJR uMLWUW0Bb4ZBDGJgRyWaQh6uBzsv0y/HIr9RBU2dApapukVunV47SMQFzY/xvgjv 5VJqEOvvQxhhLT1cG+BacNM944sKiY7I6vSHX9XjMhZTdnIHVpvCvDFOys8J4kXV oM45PrrBApOkRy2z3gsHQIgbPqjIBPAbLKRugSrjvUMQkrIf5zYm+21Zqp9UiqNV 5k64wj2U5NdqjTzFfXh+2S+JJ1DGhxgU8f3zATzozkRwPTjwx7EDvgAJncTcNEji ecEARRhqOcAiwHW/A9wt+BYIBrfSqze+BpMn+M2iJUHn7Eu5wY1uEymrF9rNSV4G zsz5hZQKi8BxFwLbIPnS6nKDSZb9qRK2RHcJLDYSXgrqbeBZqO2sACqJURt8Hl9J St2CfZgD5bR5PNDCb2ALArFR1Fn8Udr/1jt0UqBg/KmBRq51Ex+aYT1gKPqTWeq2 +m3srRRXOOVtcDFsXHO9RM8Uxh0aPrpXEq/VPujE9GNomJ5uMKwfw84LFmOpEv/S kkTx5VSv8370Yycu37e2yuKymUwLQ0sV8MtdCWuTMl+7aSpSitHXtKDOQITxJDj4 Hvl492XDQqQGQqVykuRuBmmBrkkh3k+QQpOdYZR39NUctyUv96GRl3BwjZIjGYLS ctEz/FvFKg== =6UVu -----END PGP SIGNATURE----- Merge tag 'samsung-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.7 1. Various fixes: - Reboot of some Odroid Exynos4412-based boards, - MMC regulators on Arndale5250, - Memory mapping on Artik5, - GPU power domain on Exynos542x boards, - LCD SPI polarity on UniversalC210, 2. Add thermal cooling of GPU on Odroid XU3/XU4 family, 3. Add dynamic-power-coefficient to Exynos5422 for energy model. * tag 'samsung-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Fix polarity of the LCD SPI bus on UniversalC210 board ARM: dts: exynos: Fix G3D power domain supply on Arndale Octa boards ARM: dts: exynos: Fix G3D power domain supply on Odroid XU3/XU4/HC1 boards ARM: dts: exynos: Fix memory on Artik5 evaluation boards ARM: dts: exynos: Make fixed regulators always-on on Arndale5250 ARM: dts: exynos: Fix MMC regulator on Arndale5250 board ARM: dts: exynos: Add dynamic-power-coefficient to Exynos5422 CPUs ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1 ARM: dts: exynos: Fix broken reboot on some Odroid U2/X2/U3 boards Link: https://lore.kernel.org/r/20200316175652.5604-3-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
6eda139072 |
Ux500 DTS updates for the v5.7 kernel:
- Fix some DSI nodes - Add GT-S7710 DTS file -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl5vNSUACgkQQRCzN7AZ XXND5RAAngcD98+iFIOKMGXonTVwpm+dURENv6cg7DEobSDJqhO+GlNri4HYanwD bQJjkmb6ivMj+2VakS3GK9Hn+yROExuXN5lXGvLh7VWWMk+Q+pZcYVo4dlbYDpaT f1B+jNEVv+9/vLknAikYfhKjeD3nz5hDNHJ/Qu29GVM2vnxcqOo1G5CvdWRLSxna lzdJhsnU6VHcEOQvA1Bnp+QfBJM1uuhUcbX5Su2XqrXiXoNtwGXLLn6KDZTNVYno ia/CSLpqhvunbl/6Jo1BdR9PFK5kEBb4trhHqOZbpQh8D7sEmRoHpDCkjTckgAMT ubqp+ffb3IrkPuiY1hjsrskRPxPU4s0lPp9S0r4jp9/svFllg12cBWuq1Ie5xOCX WR5D8+8GOwFa9YtFASYJZ8Exe3YwtSqc7v1A4SB9izpNzb+6v5Rkd+ZF9aFTD0Ko SS7A0uO0dj6fAjBUcfWjb5kKVyJ9WoHDxDbdZ8yJ9NXFLTibaTdrkkYfkS8FOf+s XI7OMFWuu9+7rfoE78NlzlEB+QXSRcFqYj3R1++CoWMskdCgJYlejyJu6vuMJEEo bC3rYG+EX2mfp5qLdhc8clpc/9vqDm0vXroFNU8qTlLFcBbpdX4AZcgTmyU5VJBh nLG2QDMnxEHaO+cZeMi/LDCZoFMY6dnvxpbeHA7aBT/xBbki4KU= =EpHk -----END PGP SIGNATURE----- Merge tag 'ux500-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS updates for the v5.7 kernel: - Fix some DSI nodes - Add GT-S7710 DTS file * tag 'ux500-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: Add devicetree for Samsung GT-S7710 ARM: dts: ux500: Fix up DSI controller nodes Link: https://lore.kernel.org/r/CACRpkdb8T9CZYvYEFYnQTOMoXGsn43N8TgKfvoJZjTwRHW6zhQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
eccbb5e7ee |
ARM: tegra: Device tree changes for v5.7-rc1
Minor fixes and additions for 32-bit Tegra SoC device trees. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl5rtt4THHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoXD9EAC6NlnVT2PyJloBd41Rw1TlvgSVV7s5 g2DrliQqL6kIi7EvcaV5e+pyT/AR0012qSIOKFgYceO3r8pEdv1BMbxujsLkTTTv mlut8ZZhKajs2yY0Zm9B4SL6rWXIL6GvO2LA7xwPUzSWG+zJIuupiH2jB9nKE0eo E9k9woYqhHQrOEq/lWn9c235Y/p/gO9XZKJWHJcXNjeabxkcXG5z/JMO9D3TRf2k lB9+fH9U9zfXsWCFsrGloXQfRmjcbU0pNus0f7NL0Xf+GnYxogXywreSnYteJGK/ FCtEdyu5Jy03UhUycZlvAT5vsp5gWHwkyqUKoGId515a9lRVuOfpzEhQdQ4ql4z8 eWxN+5hvuX+XXJtBbk5Fal9gZ0+p2kxOSEB1Y8Bb9mGo46ClSzzjTAKTI2VXFkP8 cn9Slgpa4uQHvkUEBnZjPXIb73kZ1sfFQTUUdWOZLG9wHym6Ag2nLtkn6TPkb6X0 kg5fmVV+HbDJagzV5oFDS4fp1KwY6zvBaifAaTTp4cLUSXOeY9IAFQrC1tXM/B8g Hdicfp/hsOiWNMYRsMEl18C0OqrBT60FgKE5GgIk/rYDW2XHCoWIk1paCSX8Tj2P tcVAKUMyfPAnYYF7UXnNfawgj/JfK7wWvv6503NJaVN4Rf6QVb02ZD3p7iXSGkYt guBhloiD4L5iaw== =qQJM -----END PGP SIGNATURE----- Merge tag 'tegra-for-5.7-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.7-rc1 Minor fixes and additions for 32-bit Tegra SoC device trees. * tag 'tegra-for-5.7-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Update sound node clocks in device tree ARM: tegra: Add clock-cells property to PMC ARM: tegra: Remove USB 2-0 port from Jetson TK1 padctl Link: https://lore.kernel.org/r/20200313165848.2915133-6-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
ead993983f |
STM32 DT updates for v5.3, round 1
Highlights:
----------
- Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier
board. It is based on stm32mp157c SoC.
- Add OTG full support on stm32mp15.
- Fix issues seen during yaml validation on stpmic and stmfx.
- Add i2c power/wakeup support on stm32mp15.
- Add card detect on sdcard on stm32mp boards
-----BEGIN PGP SIGNATURE-----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=89XF
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.3, round 1
Highlights:
----------
- Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier
board. It is based on stm32mp157c SoC.
- Add OTG full support on stm32mp15.
- Fix issues seen during yaml validation on stpmic and stmfx.
- Add i2c power/wakeup support on stm32mp15.
- Add card detect on sdcard on stm32mp boards
* tag 'stm32-dt-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (25 commits)
ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards
ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards
ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards
ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards
ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1
ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x
ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c
ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1
ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1
ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx
ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards
ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1
ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board
ARM: dts: stm32: Correct stmfx node name on stm32746g-eval board
ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151
ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1
ARM: dts: stm32: add USB OTG pinctrl to stm32mp15
ARM: dts: stm32: add USB OTG full support on stm32mp151
ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node
ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board
...
Link: https://lore.kernel.org/r/ded09d01-df47-9572-4679-34669bff8916@st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
a68260c0ec |
Renesas ARM DT updates for v5.7 (take two)
- LCD/touchscreen support for the iwg22d-sodimm board. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXmtV7QAKCRCKwlD9ZEnx cGL1AQC5+VUSTy4AMFEVxewSo9b9NY591/NT4qy3Dc/80Q40SgD/b1g78jUixCfc ogKaoo6Jdkc9a281N/5r4hbjn6ovIAM= =gLXn -----END PGP SIGNATURE----- Merge tag 'renesas-arm-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.7 (take two) - LCD/touchscreen support for the iwg22d-sodimm board. * tag 'renesas-arm-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: iwg22d-sodimm: Enable touchscreen ARM: dts: iwg22d-sodimm: Enable LCD panel Link: https://lore.kernel.org/r/20200313154304.1636-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
d29600ae8c |
Allwinner Device Tree Changes for v5.7
A fairly large set of changes for v5.7, including some new devices.
SoC specific changes:
- SPI on H6 SoC enabled
- Thermal sensor on R40 SoC enabled
- Deinterlace core hardware on A64 SoC enabled
- Redundant assigned-clocks properties removed
- required clock rates are now enforced by drivers
- LVDS panel support on A20 SoC enabled
- PMU compatible fixed for H5 and H6 SoCs
- Thermal trip points added for A83T and H5 SoCs
- (Image) Rotation core hardware on A83T and A64 SoCs enabled
Device specific changes:
- Pine64 PineTab and PinePhone added
- Various cleanups and improvements for Pine64 PineBook
- GPIO pin bank regulator supplies added for A64-OlinXino
- eMMC enabled on Orange Pi 3
- PocketBook Touch Lux 3 added
- Linutronix Testbox v2 added
- Ethernet enabled on Orange Pi One Plus
- HDMI enabled on H6-based Orange Pi boards
-----BEGIN PGP SIGNATURE-----
iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAl5rHKoOHHdlbnNAY3Np
ZS5vcmcACgkQOJpUIZwPJDB++Q/9FbA/1baCrlr6BNCudW3kO8s5KSt2kR8Wc0ey
YpFUKJN6kf69nQ6Pt2UHv0g1DJTXwPTZ1puRHXHphLYkx+kQvv6tYyIzmiZoA91u
yDN1qGrH833VlGG0L7kvtOGlfwiT4RE8sVMSNoZ0EJf9gB/PICjKwOppjpXIqE3E
gmALc1CVyAZiJsxA/SF/nJJ1kAooWaFSry5itmQGWBcHW2Rjjf5P3q8zOOTm0WGZ
EjCMvDkHO9XaV7IwjkvJNFLNOgX5J11gKDETEp4wUJSVnKfhYsSnC5mxR/IW7qK/
vgvXAiH/s5TplVzz3NxxJ8iXJfXW94fa3Hu+eGsugKfvpZRfw2vMhSbNAGoFLNhp
sDngc4h4BnPka8NB15Y6JE8XLlzj8K5plZkdCef/f+IK4dLbKCt9kBU9otgyq2S9
xLgulhZj2DilBw9S2FaqprSHFLDlqXnnEIRZLLbE8Fyv23cDfwwEZQdjv5zT+6dA
46jqo8eOKr5tPDC1wWlLukEMH0xRZILQDYp/+xCinXJpG1YdPsA11WIXl4Ar9WTO
pTTy8vYv7NLeAIsKpfE0/ptGOqiUIZImgV9lGNhjLQQ+r9lwHhaBCSOysSCEsCxb
KsysEGGPNpx+ydTW+fV2O8sebyMK+Sc/FTA3Z8IqIWw7PyvQSEjQIdmxfH04HZiO
ePHxTEk=
=75Rx
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner Device Tree Changes for v5.7
A fairly large set of changes for v5.7, including some new devices.
SoC specific changes:
- SPI on H6 SoC enabled
- Thermal sensor on R40 SoC enabled
- Deinterlace core hardware on A64 SoC enabled
- Redundant assigned-clocks properties removed
- required clock rates are now enforced by drivers
- LVDS panel support on A20 SoC enabled
- PMU compatible fixed for H5 and H6 SoCs
- Thermal trip points added for A83T and H5 SoCs
- (Image) Rotation core hardware on A83T and A64 SoCs enabled
Device specific changes:
- Pine64 PineTab and PinePhone added
- Various cleanups and improvements for Pine64 PineBook
- GPIO pin bank regulator supplies added for A64-OlinXino
- eMMC enabled on Orange Pi 3
- PocketBook Touch Lux 3 added
- Linutronix Testbox v2 added
- Ethernet enabled on Orange Pi One Plus
- HDMI enabled on H6-based Orange Pi boards
* tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (46 commits)
arm64: dts: allwinner: a64: add node for rotation core
ARM: dts: sun8i: a83t: Add device node for rotation core
arm64: dts: allwinner: a64: Fix display clock register range
ARM: dts: sunxi: Fix DE2 clocks register range
arm64: dts: allwinner: h6: orangepi: Enable HDMI
arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet
arm64: dts: allwinner: h6: Move ext. oscillator to board DTs
arm64: dts: allwinner: Add initial support for Pine64 PinePhone
dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings
arm64: dts: sun50i-a64: Add i2c2 pins
ARM: dts: sunxi: h3/h5: add r_pwm node
arm64: allwinner: a64: enable LCD-related hardware for Pinebook
ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps
ARM: dts: sun8i-h3: Add thermal trip points/cooling maps
arm64: dts: allwinner: h6: Fix PMU compatible
arm64: dts: allwinner: h5: Fix PMU compatible
ARM: dts: sun8i-a83t-tbs-a711: Drop superfluous dr_mode
arm64: dts: sun50i-h5-orange-pi-pc2: Add CPUX voltage regulator
ARM: dts: sun5i: Add PocketBook Touch Lux 3 support
dt-bindings: arm: sunxi: Add PocketBook Touch Lux 3
...
Link: https://lore.kernel.org/r/20200313055459.GA19820@wens.csie.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
b0f9a3111d |
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.7, please pull the following: - Stefan adds GPIO labels to the Raspberry Pi 4 Model B board DTS - Nicolas moves the eMMC2 controller into its separate node in order for platform firmware to perform the necessary "dma-ranges" property patching based on the chip revision since the eMMC controller has different addressing constraints. - Florian convers a whole bunch of Broadcom boards bindings from text to YAML. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl5pVN8ACgkQh9CWnEQH BwQlwg//fzXZhHKoymQU03j9bzopDga4mtvCkY7Lhqz3s+6nG7/RrnIyXKsu8gV6 AqYphjJq0MEdgEDa2i4QUXOVnIZSB8qMv2WRMQFQubd/exV/UmY9W9zK/F2sMrxw Ox/JMYGkeIEdEBfTfWI2ElU8YOvQhyBVghnbTfetJSOGCIv/JmRVvplpM+AzLWNr Wk3GKp9yG8WL5LGiwLlEJFwIw2rGdMjKMsYwLM8brkczI/4u7ngJTO6/Wd3QNaBq X7qeY7pS41jZOWTQedftd7Z6ewGmA5lsKqWDV0WosWQKVAUfgJpv34RSeZpP5HUj rlkViHv+ZIqg32529gOdyMHSID+hLUzSZsQqSvawRBOlQ6UdbOeC8lUaPPFWsmXd sWqlpoKE7O132ofVl1Uko6yEC2XKKdrW5BA2hxVxI0tMF/jgEQsW/zpXljMOYLpg m8thlsnwYS2Lzpn4CNIfTXO5Zji5+FGIXYFs9Ah/2149mnZC2oGLcXeUk4/ACDhF WMLz2jMfT19+tUFuGb84TKnx6ESYPTi7HVadNJOnW+YZuFcpfuRFV0w/LfL3aoR+ lawWDEZVD1veEg+Sz6DyMpuKCZqJJWFV4isrC6Y3wQ+TEed9pY91Ye+NTmI97DBW UMXQLvbTkinaM1tYhbL31UwXmvdcENUCOIxAu1gx9+xYVUmYSlQ= =H7v0 -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-5.7/devicetree' of https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.7, please pull the following: - Stefan adds GPIO labels to the Raspberry Pi 4 Model B board DTS - Nicolas moves the eMMC2 controller into its separate node in order for platform firmware to perform the necessary "dma-ranges" property patching based on the chip revision since the eMMC controller has different addressing constraints. - Florian convers a whole bunch of Broadcom boards bindings from text to YAML. * tag 'arm-soc/for-5.7/devicetree' of https://github.com/Broadcom/stblinux: dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg' dt-bindings: arm: bcm: Convert Vulcan to YAML dt-bindings: arm: bcm: Convert BCM11351 to YAML dt-bindings: arm: bcm: Convert BCM4708 to YAML dt-bindings: arm: bcm: Convert BCM23550 to YAML dt-bindings: arm: bcm: Convert BCM21664 to YAML dt-bindings: arm: bcm: Convert Stingray to YAML dt-bindings: arm: bcm: Convert Northstar 2 to YAML dt-bindings: arm: bcm: Convert Northstar Plus to YAML dt-bindings: arm: bcm: Convert Hurricane 2 to YAML dt-bindings: arm: bcm: Convert Cygnus to YAML ARM: dts: bcm2711: Move emmc2 into its own bus ARM: dts: bcm2711-rpi-4-b: Add SoC GPIO labels Link: https://lore.kernel.org/r/20200311212012.9418-2-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
8f79ec4639 |
Devicetree changes for omaps for v5.7 merge window
Few device tree changes for omaps for v5.7 to configure omap5 AESS module and to add idle_states for am335x and am437x cpuidle. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl5idy0RHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXNixA//TDh5bpBomdsRr0D7hYFYmgFZK2gk5X9x 4j/b/C+6ZA8MzLfNE+k58eHAiBVSs1BmUMLygW6wLTwwf2n3KmCOt77QGPenXGTt 8KuHceMJXkKH3ZxYRk5+tQFm95l2uvNCXA0aGntx4n5mmeAa+mDUD534PRB1B7gU DHB0qqwiaCffX+C5sEswe+krl6vzjcDTo4kmETqgSWz/ZjHqdzjIn42wWZO/s2Ct aYVRP3AttdNRId03+QjZx52m6w6vNmMhtlRTrAvCSVgKpBM5tQpCkxBVA6mLDY3S Mcmp8B6iL+jEGqdSVTRG+Tzg4Eq76OlTiugKSOtXsMitC8WKGiuT+YXvg8Uwfnjf UnaEzaBOUF8FAakNAzgbE6I8A8pVgoKJR6I2zvR8ZAE9wUXDxLZQauqvM/MpmQdZ Rc+ZQx2a4gPWqdKcLGDoqJb2iGDFJ4hJQ27raOX5rGMgKVia6gr8lUDBKJfGXr3c /Kt65v5tMgWRZrF6OK4uAe2wDqduzNN0fjG228q1/tW3JcpHdsjf5sBfaIr3NvKu hausfW5O5Y2ge20dIo48keajo4TdMDzaEunCwP/SkNSsY76qTgzKRIey4FEczp2l Um89SqqgKsAsEcIpR6Vo0IZSj+Yz80zQrOivWTravpid7HzwrPnqWiQhKC1A6lpC y13PeTX5aw0= =DwZQ -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.7 merge window Few device tree changes for omaps for v5.7 to configure omap5 AESS module and to add idle_states for am335x and am437x cpuidle. * tag 'omap-for-v5.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Add idle_states for cpuidle ARM: dts: am33xx: Add idle_states for cpuidle ARM: dts: Configure omap5 AESS Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-4 Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
56fc0e678f |
Versatile DTS updates for the v5.7 series take one:
- Schema validation for the top level of all ARM reference designs: Integrator, Versatile, RealView, Juno. - Clean up some node names in the trees so they pass validation fine. - Drop the old text bindings. - A top level DMA ranges patch from Rob. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl5fvGIACgkQQRCzN7AZ XXNf7xAAuf9DBhZ544JMn67I4reSltISWeng8TfPjT8ZB+3l8X+G6YEXoBdgd0dl SYwtJyJ7wOQJk2jCy9L5lOnvF3frD8OIZw/UDAhHno/kn4yrR2/sHjhqSGEpspaL wZ0LLRe6wnPNBQHgvGVa3T/Tr7nLbu5Gs/Z+LAb1C4V5atj386JLF9OxNcK5xUMx +abJinQF1kI79N5HgLE+BZ5qNZG4COlcdHZz5im6sBPKF4UDyfHYqUY0FGUIhV4j 3biI1L5w0CWJ498eXOlQ5zMnuUyp17gEgd7MBOOe02LzJOfh6m2qHbOWIe8x22/i sqs/Q5hwSeKzrKFzwQqgY/i9O/WeIvziMVUAb3FzcuTrXJGKHXpMXkSYhsAv+Yyv gOkTmsUA4y9Q6LlhGCrZcpKzan7pM1rKtJMK+3yj/GvEookpzFj59LkWFHdsOIJZ Gp34xT5hO8RKSrrNMX7b92svJtFdWciKWxVPlEK2pdfNam3+B0/nkv2QLDJ8e1t6 IslDcPDiJf7e0xEelG+tpkLpjls/1QSBA+kghZA5L0NL5mbnM9j4/NH7RMChfF/8 zu6VKuQdDNGjpEqocCDy0OlGjD0gNQcHHaCQepqMX6LaEnEoA3zQezjDDRpXg2l+ 5ouUsPMtIWIG8lCxhI6XCFpWgmd05zOJRbbuKevoGwIchT1/bMA= =0W6a -----END PGP SIGNATURE----- Merge tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt Versatile DTS updates for the v5.7 series take one: - Schema validation for the top level of all ARM reference designs: Integrator, Versatile, RealView, Juno. - Clean up some node names in the trees so they pass validation fine. - Drop the old text bindings. - A top level DMA ranges patch from Rob. * tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM/arm64: dts: Rename SMB bus to just bus dt-bindings: arm: Drop the non-YAML bindings dt-bindings: arm: Add Versatile Express and Juno YAML schema dt-bindings: arm: Add RealView YAML schema dt-bindings: arm: Add Versatile YAML schema dt-bindings: arm: Add Integrator YAML schema ARM: dts: RealView: Fix the name of the SoC node ARM: dts: Versatile: Use syscon as node name for IB2 ARM: dts: integratorap: Remove top level dma-ranges Link: https://lore.kernel.org/r/CACRpkdbbniYVnsE-pAmU2qCerswserNgEFtY48XQ+_K+DUNC9Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
3cd3fabd82 |
Renesas ARM DT updates for v5.7
- Miscellaneous fixes and improvements. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXlZDvgAKCRCKwlD9ZEnx cInoAQDY3kEKE8gJlFMFiXxayJUPs/7LyPw8Wrw0Lfgl+mJrAAEAjywMpwIFO6Mo ivI2GQvl1qTb6OrGoLx1cklDp8aD/wQ= =NbSJ -----END PGP SIGNATURE----- Merge tag 'renesas-arm-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.7 - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: rzg1: Add reset control properties for display ARM: dts: rcar-gen2: Add reset control properties for display ARM: dts: r8a7745: Convert to new DU DT bindings ARM: dts: r7s72100: Add SPIBSC clocks ARM: dts: renesas: Group tuples in operating-points properties ARM: dts: renesas: Add missing ethernet PHY reset GPIO on Gen2 reference boards Link: https://lore.kernel.org/r/20200226110221.19288-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
a88fead83e |
Merge tag 'oxnas-arm-soc-dt-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas into arm/fixes
- interrupt controller mask init fix to avoid spurious irq after soft reset * tag 'oxnas-arm-soc-dt-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas: ARM: dts: oxnas: Fix clear-mask property Link: https://lore.kernel.org/r/1cc83d6b-78de-9160-59bf-77cfe726a365@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
94bb9d1858 |
Merge tag 'arm-soc/for-5.6/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.6, please pull the following: - Nick fixes the missing pinctrl-names property for the Raspberry Pi Zero Wireless DTS - Nicolas fixes the VC4 firmware node dma-range property which does not have the limitations of the soc's bus node * tag 'arm-soc/for-5.6/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: bcm2835-rpi-zero-w: Add missing pinctrl name Link: https://lore.kernel.org/r/20200323025246.22713-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
ae6e45986a |
Merge tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Few more fixes for omaps Just few dts fixes: - A fix droid4 touchscreen stopping working with lost gpio interrupts - Also limit omap5 dma range similar to what we've recently done for dra7 * tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: dts: N900: fix onenand timings ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode Link: https://lore.kernel.org/r/pull-1584575254-461940@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Marek Szyprowski
|
05ff1e3fb8 |
ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards
Commit |
||
|
Arnd Bergmann
|
ad5d7a5513 |
Merge tag 'imx-fixes-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.6, round 2: - Fix minimum voltage setting of vdd_arm and vdd_soc on i.MX6 phycore-som board. * tag 'imx-fixes-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage Link: https://lore.kernel.org/r/20200316032555.GD17221@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
d2687b896d |
Allwinner Fixes for 5.6 - part 2
This follows up on the previous 5.6 fixes tag with a fix for the A33 Security System (crypto offloading hardware). The hardware was found to not be compatible with existing hardware and a new compatible was needed. The driver change was picked up right before the previous -rc6 and the DT bindings and DT changes were not picked up. The goal is to have all the changes in the same release, that is v5.6. -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAl5rIdkOHHdlbnNAY3Np ZS5vcmcACgkQOJpUIZwPJDDwyBAA25+D4D8dB5ZEsFcw4JOfuvCFfJE0M4IRerHd 5CHK4LwDC4S+MFdtE763NiVDQxNBf3K5yMe3wl/dCRL2XkUeJfUjhbi7msKvCqLL ReLTMxZzMr3jhYNYb15oEJmLSZCDak29LnI59vh8OfyRnN20drMVyYPjoBwpV77f P+rn553tyd0XrbnIXL/2ISSypX0PSEQq7ZSds/GIwz/9n8dPQj3d8DlVcDpC9NOu SrTcG55Y5GWkH5RRxOr+kNeoFAAClFTJCWgUHRcIn2/LGuuQazZPGDH7WOnbafJX zdkPa/OWTLOev+2oFF9Ae9PxtAORTOZQ9LqzMKi67xmNBnpJ5s5Nk+Fb1JMgVhdx B00RZoUrokF1c1qsvLXN+CU8VhFm+Zid8qkc9j3FD0gbLJEL0knoxt7Zr0cnLwf4 AdGQjlE+EtF8OkbGeCsJ7Pa4hndycbg7HnvarzVj6EjdqwA5MWM3AisqOOvHOo7T p5qdsXVXKwesLVM3AtEB9spGe4GE0IBANfGIUiV0RwA3FQZ773uhfHfQfPLGoABD wXd1lQvA6WbMkzGRGPqnQ3g07aTKzGMoDXY8AiMGbtUPXbvrDIJqrlPzBo+yHodg dNKdz/8rzGbakzCSVtrlQYfVYY+qYVLcghutnv/G3bMJkTrHpYd74xume2EclR/b YxzSobs= =lpzG -----END PGP SIGNATURE----- Merge tag 'sunxi-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for 5.6 - part 2 This follows up on the previous 5.6 fixes tag with a fix for the A33 Security System (crypto offloading hardware). The hardware was found to not be compatible with existing hardware and a new compatible was needed. The driver change was picked up right before the previous -rc6 and the DT bindings and DT changes were not picked up. The goal is to have all the changes in the same release, that is v5.6. * tag 'sunxi-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS Link: https://lore.kernel.org/r/20200313060727.GA23962@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
aafd017347 |
Allwinner Fixes for v5.6
A pretty normal set of fixes for v5.6: - Fix reversed macros used for A83T EMAC clock and reset - Fix camera regulator voltage and USB OTG for TBS-A711 - 16-bit / 8-bit mixed read fix for our RSB driver - Fix SPI controller base address for R40 - Reorder device nodes based on base address for R40 -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAl5rGFcOHHdlbnNAY3Np ZS5vcmcACgkQOJpUIZwPJDC7ehAAjd+M6e4/XPSJvR6w5EOSbbZ7lJbW916+I4TK vFvwyow4YQX7ryE6ivq0ytGYA2THJQI8TSxhaeLUVNF64TnG6LzsXIyyqPRVyav+ AxIB2tQWWnemcVPfS1CobRF3FXng1hBzs2ooaGb3N9ois1wcVTqHvcOxkvaNvZ3s 0q8tIAmvnkBiqBESdcwz3hjYZqhcbkj3qra73xJVy7BmwOhsBquEYbeCmO2eyqdO FjhWpE5BuR/4D3UZYrVnhz+r+6LSWlM/Bc8MfAOmtFHrYJkcFLF5CYqctGzPyjkS sPWtmHKszJfep7u8PHVvEsM7T9EXjtj/B2/z3ms0Z8YnWiEMkBB9qfc9dnvdy0QI TAod6n4i2r2Jf8lFVSnDYEGBa2+vD3D6ySG5vAi4PzkErF+eO9Av3t/JUeco2uWY uD7UROyK+34kxPcn+RYkcudnTqPyAmSiAPE9xBOM9qIzaEXk9bwrdI4bA+LVtoYX y2/c1MC3j4iM+7Xa7UxSkclmDi8Pty++wwtTX6g8MAzEhncx52SALa2mmm6LCSNc Z2zOBy1SFkzi71c11GZCzMu8cV+W6R9wXQ8x2hfqqngPDrXBUgnKy6jpCEzF/NCm O1JYtwRHslMEsRwR+Co/4Av/Smt20qC1peVjQe93OLWOYTj3YAdLTVR9sd3DLcLd S4DkeJ0= =yBY0 -----END PGP SIGNATURE----- Merge tag 'sunxi-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for v5.6 A pretty normal set of fixes for v5.6: - Fix reversed macros used for A83T EMAC clock and reset - Fix camera regulator voltage and USB OTG for TBS-A711 - 16-bit / 8-bit mixed read fix for our RSB driver - Fix SPI controller base address for R40 - Reorder device nodes based on base address for R40 * tag 'sunxi-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage ARM: dts: sun8i: a83t: Fix incorrect clk and reset macros for EMAC device Link: https://lore.kernel.org/r/20200313055233.GA19649@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |