The test was relaxed a bit to much.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-and-Tested-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to try to map them every time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a BO is moved or destroyed it shouldn't be kmapped any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to do this after every single update.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handy for debugging.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Printing a warning into the logs that we will certainly run into a BUG() is
completely nonsense, the BUG() is more than noisy enough.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to wait with the correct owner on unmap operations or otherwise can run
into VM faults.
Also always wait for the page directory since this is where the reservation
object comes from. So rename the function to amdgpu_vm_wait_pd instead as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't have any update fence in that case, so the need
for flushing isn't detected automatically.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spreading them causes performance regressions using compute
queues on Polaris 11.
Cc: Jim Qu <jim.qu@amd.com>
Acked-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is just future proofing code, not something that can be triggered
in real life. We're testing to make sure we don't shift wrap when we
do "1ull << i" so "i" has to be in the 0-63 range. If it's 64 then we
have gone too far.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to read the vbios image directly from ROM.
This is already implemented for other asics, but was not
yet available for SI.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maybe a leftover from bringup?
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than the legacy atombios version.
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The information has moved to different tables, notably
smu_info for core refclk and umc_info for mem refclk.
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A subset of VM fault types currently send retry XNACK to the client.
This causes a storm of interrupts from the VM to the host.
Until the storm is throttled by other means send no-retry XNACK for
all fault types instead. No change in behavior to the client which
will stall indefinitely with the current configuration in any case.
Improves system stability under GC or MMHUB faults.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: John Bridgman <John.Bridgman@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set a configurable SDMA phase quantum when enabling SDMA context
switching. The default value significantly reduces SDMA latency
in page table updates when user-mode SDMA queues have concurrent
activity, compared to the initial HW setting.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Andres Rodriguez <andres.rodriguez@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable SDMA context switching on CIK (copied from sdma_v3_0.c).
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX context, the ATC bit in SDMA*_GFX_VIRTUAL_ADDRESS can be cleared
to perform in VM mode. For RLC context, to support ATC mode , ATC bit in
SDMA*_RLC*_VIRTUAL_ADDRESS should be set. SDMA_CNTL.ATC_L1_ENABLE bit is
global setting that enables the L1-L2 translation for ATC address.
Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This gives BOs which haven't been accessed by the CPU since they were
moved to visible VRAM another chance to stay in VRAM when another BO
needs to go to visible VRAM.
This should allow BOs to stay in VRAM longer in some cases.
v2:
* Only do this for BOs which don't have the
AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED flag set.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need for page faults to force BOs into visible VRAM if it's
full, and the time it takes to do so is great enough to cause noticeable
stuttering. Add GTT as a possible placement so that if visible VRAM is
full, page faults move BOs to GTT instead of evicting other BOs from VRAM.
Suggested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a BO is moved to VRAM, clear AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED.
This allows it to potentially later move to invisible VRAM if the CPU
does not access it again.
Setting the CPU_ACCESS flag in amdgpu_bo_fault_reserve_notify() also means
that we can remove the loop to restrict lpfn to the end of visible VRAM,
because amdgpu_ttm_placement_init() will do it for us.
v3 [Michel Dänzer]
* Use AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED instead of a new flag
(Christian König)
* Clear flag in amdgpu_bo_move instead of amdgpu_move_ram_vram
(Christian)
* Explicitly mention amdgpu_bo_fault_reserve_notify in amdgpu_bo_move
* Also clear flag in amdgpu_bo_create_restricted
Suggested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The BO move throttling code is designed to allow VRAM to fill quickly if it
is relatively empty. However, this does not take into account situations
where the visible VRAM is smaller than total VRAM, and total VRAM may not
be close to full but the visible VRAM segment is under pressure. In such
situations, visible VRAM would experience unrestricted swapping and
performance would drop.
Add a separate counter specifically for moves involving visible VRAM, and
check it before moving BOs there.
v2: Only perform calculations for separate counter if visible VRAM is
smaller than total VRAM. (Michel Dänzer)
v3: [Michel Dänzer]
* Use BO's location rather than the AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED
flag to determine whether to account a move for visible VRAM in most
cases.
* Use a single
if (adev->mc.visible_vram_size < adev->mc.real_vram_size) {
block in amdgpu_cs_get_threshold_for_moves.
Fixes: 95844d20ae (drm/amdgpu: throttle buffer migrations at CS using a fixed MBps limit (v2))
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow specifying a limit on visible VRAM via a module parameter. This is
helpful for testing performance under visible VRAM pressure.
v2: Add cast to 64-bit (Christian König)
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limit the default GART size and save a lot of VRAM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows setting the gtt size independent of the gart size.
v2: fix copy and paste typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should only cover the GART size with the GTT manager.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename symbols from gtt_ to gart_ as appropriate.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change, just cleanup.
v2: rebased, keep gart name.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than checking the CONGIG_MEMSIZE register as that may
not be reliable on some APUs.
v2: The scratch register is only used on CIK+
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call nbio init registers on hw_init to set up any
nbio registers that need initialization at hw init time.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used for nbio registers that need to be initialized. Currently
only used for a golden setting that got missed on some boards.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- v2: rename param 'en' as 'lock'
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the TTM values instead of the hardware config here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can finally remove this now.
v2: remove now unused max_size variable as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to map BOs to GTT on eviction and intermediate transfers any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way we don't need to map the full BO at a time any more.
v2: use fixed windows for src/dst
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to write the mapped PTEs into
an IB instead of the table directly.
v2: fix build with debugfs enabled, remove unused assignment
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to use them as remap address space.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
