Change the parameters of hns3_rx_checksum to be more specific to
what is used internally, rather than passing in a pointer to the
whole hns3_desc. Reduces duplicate code and bring this function
inline with the approach used in hns3_set_gro_param.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In original codes, ndo_set_vf_vlan() in hns3 driver was implemented
wrong. It adds or removes VLAN into VLAN filter for VF, but VF is
unaware of it.
This patch fixes it. When VF loads up, it firstly queries the port
based VLAN state from PF. When user change port based VLAN state
from PF, PF firstly checks whether the VF is alive. If the VF is
alive, then PF notifies the VF the modification; otherwise PF
configure the port based VLAN state directly.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In original codes, ndo_set_vf_vlan() in hns3 driver was implemented
wrong. It adds or removes VLAN into VLAN filter for VF, but VF is
unaware of it.
Indeed, ndo_set_vf_vlan() is expected to enable or disable port based
VLAN (hardware inserts a specified VLAN tag to all TX packets for a
specified VF) . When enable port based VLAN, we use port based VLAN id
as VLAN filter entry. When disable port based VLAN, we use VLAN id of
VLAN device.
This patch fixes it for PF, enable/disable port based VLAN when calls
ndo_set_vf_vlan().
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, in TX direction, driver implements the TX VLAN offload
by checking the VLAN header in skb, and filling it into TX descriptor.
Usually it works well, but if enable inserting VLAN header based on
port, it may conflict when out_tag field of TX descriptor is already
used, and cause RAS error.
In RX direction, hardware supports stripping max two VLAN headers.
For vlan_tci in skb can only store one VLAN tag, when RX VLAN offload
enabled, driver tells hardware to strip one VLAN header from RX
packet; when RX VLAN offload disabled, driver tells hardware not to
strip VLAN header from RX packet. Now if port based insert VLAN
enabled, all RX packets will have the port based VLAN header. This
header is useless for stack, driver needs to ask hardware to strip
it. Unfortunately, hardware can't drop this VLAN header, and always
fill it into RX descriptor, so driver has to identify and drop it.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our hardware supports inserting a specified VLAN header for each
function when sending packets. User can enable it with command
"ip link set <devname> vf <vfid> vlan <vlan id>".
For this VLAN header is inserted by hardware, not from stack,
hardware also needs to strip it from received packets before
sending to stack. In this case, driver needs to tell
hardware which VLAN to insert or strip.
The current VLAN initialization doesn't allow inserting
VLAN header by hardware, this patch modifies it, in order be
compatible with VLAN inserted base on port.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
net: phy: shrink PHY settings array and add 200Gbps support
The definition of array settings[] is quite lengthy meanwhile. Add a
macro to shrink the definition.
When doing this I saw that the new 200Gbps modes and few 100Gbps/50Gbps
modes aren't supported in phylib yet. So add this.
To avoid ethtool and phylib mode definitions getting out of sync, add
a build bug to check for this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If new PHY modes are added people may miss to update all relevant places
in the kernel. Therefore add a build bug check for new modes in enum
ethtool_link_mode_bit_indices that haven't been added to phylib yet.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recently new modes have been added to ethtool.h, but the related
extension to phylib hasn't been done yet. So add support for these
modes.
v2:
- add missing 100Gbps and 50Gbps modes
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The definition of array settings[] is quite lengthy meanwhile. Add a
macro to shrink the definition.
v2:
- Fix an indentation issue
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
NeilBrown says:
====================
Fix rhashtable bit-locking for m68k
As reported by Guenter Roeck, the new rhashtable bit-locking
doesn't work on m68k as it only requires 2-byte alignment, so BIT(1)
is addresses is not unused.
We current use BIT(0) to identify a NULLS marker, but that is only
needed in ->next pointers. The bucket head does not need a NULLS
marker, so the lsb there can be used for locking.
the first 4 patches make some small improvements and re-arrange some
code. The final patch converts to using only BIT(0) for these two
different special purposes.
I had previously suggested dropping the series until I fix it. Given
that this was fairly easy, I retract that I think it best simply to
add these patches to fix the code.
====================
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Guenter Roeck, the new bit-locking using
BIT(1) doesn't work on the m68k architecture. m68k only requires
2-byte alignment for words and longwords, so there is only one
unused bit in pointers to structs - We current use two, one for the
NULLS marker at the end of the linked list, and one for the bit-lock
in the head of the list.
The two uses don't need to conflict as we never need the head of the
list to be a NULLS marker - the marker is only needed to check if an
object has moved to a different table, and the bucket head cannot
move. The NULLS marker is only needed in a ->next pointer.
As we already have different types for the bucket head pointer (struct
rhash_lock_head) and the ->next pointers (struct rhash_head), it is
fairly easy to treat the lsb differently in each.
So: Initialize buckets heads to NULL, and use the lsb for locking.
When loading the pointer from the bucket head, if it is NULL (ignoring
the lock big), report as being the expected NULLS marker.
When storing a value into a bucket head, if it is a NULLS marker,
store NULL instead.
And convert all places that used bit 1 for locking, to use bit 0.
Fixes: 8f0db01800 ("rhashtable: use bit_spin_locks to protect hash bucket.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only times rht_ptr_locked() is used, it is to store a new
value in a bucket-head. This is the only time it makes sense
to use it too. So replace it by a function which does the
whole task: Sets the lock bit and assigns to a bucket head.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than dereferencing a pointer to a bucket and then passing the
result to rht_ptr(), we now pass in the pointer and do the dereference
in rht_ptr().
This requires that we pass in the tbl and hash as well to support RCU
checks, and means that the various rht_for_each functions can expect a
pointer that can be dereferenced without further care.
There are two places where we dereference a bucket pointer
where there is no testable protection - in each case we know
that we much have exclusive access without having taken a lock.
The previous code used rht_dereference() to pretend that holding
the mutex provided protects, but holding the mutex never provides
protection for accessing buckets.
So instead introduce rht_ptr_exclusive() that can be used when
there is known to be exclusive access without holding any locks.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch only moves some code around, it doesn't
change the code at all.
A subsequent patch will benefit from this as it needs
to add calls to functions which are now defined before the
call-site, but weren't before.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With these annotations, the rhashtable now gets no
warnings when compiled with "C=1" for sparse checking.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along with
memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kvzalloc(size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
nfp: update to control structures
This series prepares NFP control structures for crypto offloads.
So far we mostly dealt with configuration requests under rtnl lock.
This will no longer be the case with crypto. Additionally we will
try to reuse the BPF control message format, so we move common code
out of BPF.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF's control message handler seems like a good base to built
on for request-reply control messages. Split it out to allow
for reuse.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During probe we clear vNIC configuration in case the device
wasn't closed cleanly by previous driver. Move that code
before netdev init, so netdev init can already try to apply
its config parameters.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Soon we will try to write to the vNIC mailbox without RTNL held.
Add a new mutex to protect access to specific parts of the PCI
control BAR.
Move the mailbox size checking to the mailbox lock() helper, where
it can be more effective (happen prior to potential overwrite of
other data).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the reconfig was a quick update, we could have results available from
firmware within 200us.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the review of 0b34eb0043 ("ipv6: Refactor __ip6_route_redirect"),
Martin noted that the flowi6_oif compare is moved to the new helper and
should be removed from __ip6_route_redirect. Fix the oversight.
Fixes: 0b34eb0043 ("ipv6: Refactor __ip6_route_redirect")
Reported-by: Martin Lau <kafai@fb.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
netdevsim: Mostly cleanup in sdev/bpf iface area
This patches does mainly internal netdevsim code shuffle. Nothing
serious, just small changes to help readability and preparations for
future work.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to improve readability and prepare for future code changes,
move sdev specific init/uninit code into separate functions.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
offload dev is stored in sdev struct. However, first netdevsim instance
is used as a priv. Change this to be sdev to as it is shared among
multiple netdevsim instances.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some netdevsim bpf debugfs files are per-sdev, yet they are defined per
netdevsim instance. Move them under sdev directory.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make code easier to read, move shared dev bits into a separate file.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch also performs some minor adjustments such as numbering for
the receive path sequence, conversion of keywords to inline literals and
adding an index page so it looks better in the output of 'make htmldocs'.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For reporting the common set of SW timestamping capabilities, use
ethtool_op_get_ts_info() instead of re-implementing it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For reporting the common set of SW timestamping capabilities, use
ethtool_op_get_ts_info() instead of re-implementing it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For reporting the common set of SW timestamping capabilities, use
ethtool_op_get_ts_info() instead of re-implementing it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
net/smc: patches 2019-04-12
here are patches for SMC:
* patch 1 improves behavior of non-blocking connect
* patches 2, 3, 5, 7, and 8 improve connecting return codes
* patches 4 and 6 are a cleanups without functional change
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework smc_conn_create() to always return a valid DECLINE reason code.
This removes the need to translate the return codes on 4 different
places and allows to easily add more detailed return codes by changing
smc_conn_create() only.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework smc_listen_work() to provide improved reason codes when an
SMC connection is declined. This allows better debugging on user side.
This also adds 3 more detailed reason codes in smc_clc.h to indicate
what type of device was not found (ism or rdma or both), or if ism
cannot talk to the peer.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In smc_listen_work() the variables rc and reason_code are defined which
have the same meaning. Eliminate reason_code in favor of the shorter
name rc. No functional changes.
Rename the functions smc_check_ism() and smc_check_rdma() into
smc_find_ism_device() and smc_find_rdma_device() to make there purpose
more clear. No functional changes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vlan_id of the underlying CLC socket was retrieved two times
during processing of the listen handshaking. Change this to get the
vlan id one time in connect and in listen processing, and reuse the id.
And add a new CLC DECLINE return code for the case when the retrieval
of the vlan id failed.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During initialization of an SMC socket a lot of function parameters need
to get passed down the function call path. Consolidate the parameters
in a helper struct so there are less enough parameters to get all passed
by register.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The check for a matching ip prefix and subnet was only done for SMC-R
in smc_listen_rdma_check() but not when an SMC-D connection was
possible. Rename the function into smc_listen_prfx_check() and move its
call to a place where it is called for both SMC variants.
And add a new CLC DECLINE reason for the case when the IP prefix or
subnet check fails so the reason for the failing SMC connection can be
found out more easily.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct the CLC decline reason codes for internal problems to not have
the sign bit set, negative reason codes are interpreted as not eligible
for TCP fallback.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For nonblocking sockets move the kernel_connect() from the connect
worker into the initial smc_connect part to return kernel_connect()
errors other than -EINPROGRESS to user space.
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During coredump analysis, it is not easy to obtain the address of
backend_info in xen-netback.
So far there are two ways to obtain backend_info:
1. Do what xenbus_device_find() does for vmcore to find the xenbus_device
and then derive it from dev_get_drvdata().
2. Extract backend_info from callstack of xenwatch (e.g., netback_remove()
or frontend_changed()).
This patch adds a reference from xenvif to backend_info so that it would be
much more easier to obtain backend_info during coredump analysis.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller says:
====================
SCTP: Event skb list overhaul.
This patch series eliminates the explicit reference to the skb list
implementation via skb->prev dereferences.
The approach used is to pass a non-empty skb list around instead of an
event skb object which may or may not be on a list.
I'd like to thank Marcelo Leitner, Xin Long, and Neil Horman for
reviewing previous versions of this series.
Testing would be very much appreciated, in addition to the review of
course.
v4 --> v5: Rebase to net-next
v3 --> v4: Fix the logic in patch #4 so that we don't miss cases
where we should add event to the on-stack temp list.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now the SKB list implementation assumption can be removed.
And now that we know that the list head is always non-NULL
we can remove the code blocks dealing with that as well.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass this, instead of an event. Then everything trickles down and we
always have events a non-empty list.
Then we needs a list creating stub to place into .enqueue_event for sctp_stream_interleave_1.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This way we can make sure events sent this way to
sctp_ulpq_tail_event() are on a list as well. Now all such code paths
are fully covered.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This way we can simplify the logic and remove assumptions
about the implementation of skb lists.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inside the loop, we always start with event non-NULL.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix net reference counting in fl_change() and remove redundant call to
tcf_exts_get_net() from __fl_delete(). __fl_put() already tries to get net
before releasing exts and deallocating a filter, so this code caused flower
classifier to obtain net twice per filter that is being deleted.
Implementation of __fl_delete() called tcf_exts_get_net() to pass its
result as 'async' flag to fl_mask_put(). However, 'async' flag is redundant
and only complicates fl_mask_put() implementation. This functionality seems
to be copied from filter cleanup code, where it was added by Cong with
following explanation:
This patchset tries to fix the race between call_rcu() and
cleanup_net() again. Without holding the netns refcnt the
tc_action_net_exit() in netns workqueue could be called before
filter destroy works in tc filter workqueue. This patchset
moves the netns refcnt from tc actions to tcf_exts, without
breaking per-netns tc actions.
This doesn't apply to flower mask, which doesn't call any tc action code
during cleanup. Simplify fl_mask_put() by removing the flag parameter and
always use tcf_queue_work() to free mask objects.
Fixes: 061775583e ("net: sched: flower: introduce reference counting for filters")
Fixes: 1f17f7742e ("net: sched: flower: insert filter to ht before offloading it to hw")
Fixes: 05cd271fd6 ("cls_flower: Support multiple masks per priority")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pmtu.sh script runs a number of tests and dumps a summary of pass/fail.
If a test fails, it is near impossible to debug why. For example:
TEST: ipv6: PMTU exceptions [FAIL]
There are a lot of commands run behind the scenes for this test. Which
one is failing?
Add a VERBOSE option to show commands that are run and any output from
those commands. Add a PAUSE_ON_FAIL option to halt the script if a test
fails allowing users to poke around with the setup in the failed state.
In the process, rename tracing to TRACING and move declaration to top
with the new variables.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-04-12
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Improve BPF verifier scalability for large programs through two
optimizations: i) remove verifier states that are not useful in pruning,
ii) stop walking parentage chain once first LIVE_READ is seen. Combined
gives approx 20x speedup. Increase limits for accepting large programs
under root, and add various stress tests, from Alexei.
2) Implement global data support in BPF. This enables static global variables
for .data, .rodata and .bss sections to be properly handled which allows
for more natural program development. This also opens up the possibility
to optimize program workflow by compiling ELFs only once and later only
rewriting section data before reload, from Daniel and with test cases and
libbpf refactoring from Joe.
3) Add config option to generate BTF type info for vmlinux as part of the
kernel build process. DWARF debug info is converted via pahole to BTF.
Latter relies on libbpf and makes use of BTF deduplication algorithm which
results in 100x savings compared to DWARF data. Resulting .BTF section is
typically about 2MB in size, from Andrii.
4) Add BPF verifier support for stack access with variable offset from
helpers and add various test cases along with it, from Andrey.
5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header
so that L2 encapsulation can be used for tc tunnels, from Alan.
6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that
users can define a subset of allowed __sk_buff fields that get fed into
the test program, from Stanislav.
7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up
various UBSAN warnings in bpftool, from Yonghong.
8) Generate a pkg-config file for libbpf, from Luca.
9) Dump program's BTF id in bpftool, from Prashant.
10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP
program, from Magnus.
11) kallsyms related fixes for the case when symbols are not present in
BPF selftests and samples, from Daniel
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
