Patch series "mm, THP, swap: Delay splitting THP after swapped out", v3.
This is the second step of THP (Transparent Huge Page) swap
optimization. In the first step, the splitting huge page is delayed
from almost the first step of swapping out to after allocating the swap
space for the THP and adding the THP into the swap cache. In the second
step, the splitting is delayed further to after the swapping out
finished. The plan is to delay splitting THP step by step, finally
avoid splitting THP for the THP swapping out and swap out/in the THP as
a whole.
In the patchset, more operations for the anonymous THP reclaiming, such
as TLB flushing, writing the THP to the swap device, removing the THP
from the swap cache are batched. So that the performance of anonymous
THP swapping out are improved.
During the development, the following scenarios/code paths have been
checked,
- swap out/in
- swap off
- write protect page fault
- madvise_free
- process exit
- split huge page
With the patchset, the swap out throughput improves 42% (from about
5.81GB/s to about 8.25GB/s) in the vm-scalability swap-w-seq test case
with 16 processes. At the same time, the IPI (reflect TLB flushing)
reduced about 78.9%. The test is done on a Xeon E5 v3 system. The swap
device used is a RAM simulated PMEM (persistent memory) device. To test
the sequential swapping out, the test case creates 8 processes, which
sequentially allocate and write to the anonymous pages until the RAM and
part of the swap device is used up.
Below is the part of the cover letter for the first step patchset of THP
swap optimization which applies to all steps.
=========================
Recently, the performance of the storage devices improved so fast that
we cannot saturate the disk bandwidth with single logical CPU when do
page swap out even on a high-end server machine. Because the
performance of the storage device improved faster than that of single
logical CPU. And it seems that the trend will not change in the near
future. On the other hand, the THP becomes more and more popular
because of increased memory size. So it becomes necessary to optimize
THP swap performance.
The advantages of the THP swap support include:
- Batch the swap operations for the THP to reduce TLB flushing and lock
acquiring/releasing, including allocating/freeing the swap space,
adding/deleting to/from the swap cache, and writing/reading the swap
space, etc. This will help improve the performance of the THP swap.
- The THP swap space read/write will be 2M sequential IO. It is
particularly helpful for the swap read, which are usually 4k random
IO. This will improve the performance of the THP swap too.
- It will help the memory fragmentation, especially when the THP is
heavily used by the applications. The 2M continuous pages will be
free up after THP swapping out.
- It will improve the THP utilization on the system with the swap
turned on. Because the speed for khugepaged to collapse the normal
pages into the THP is quite slow. After the THP is split during the
swapping out, it will take quite long time for the normal pages to
collapse back into the THP after being swapped in. The high THP
utilization helps the efficiency of the page based memory management
too.
There are some concerns regarding THP swap in, mainly because possible
enlarged read/write IO size (for swap in/out) may put more overhead on
the storage device. To deal with that, the THP swap in should be turned
on only when necessary.
For example, it can be selected via "always/never/madvise" logic, to be
turned on globally, turned off globally, or turned on only for VMA with
MADV_HUGEPAGE, etc.
This patch (of 12):
Previously, swapcache_free_cluster() is used only in the error path of
shrink_page_list() to free the swap cluster just allocated if the THP
(Transparent Huge Page) is failed to be split. In this patch, it is
enhanced to clear the swap cache flag (SWAP_HAS_CACHE) for the swap
cluster that holds the contents of THP swapped out.
This will be used in delaying splitting THP after swapping out support.
Because there is no THP swapping in as a whole support yet, after
clearing the swap cache flag, the swap cluster backing the THP swapped
out will be split. So that the swap slots in the swap cluster can be
swapped in as normal pages later.
Link: http://lkml.kernel.org/r/20170724051840.2309-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Several functions use an enum type as parameter for an event/state, but
are called in some locations with an argument of a different enum type.
Adjust the interface of these functions to reality by changing the
parameter to int.
This fixes a ton of enum-conversion warnings that are generated when
building the kernel with clang.
[mka@chromium.org: also change parameter type of inc/dec/mod_memcg_page_state()]
Link: http://lkml.kernel.org/r/20170728213442.93823-1-mka@chromium.org
Link: http://lkml.kernel.org/r/20170727211004.34435-1-mka@chromium.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
Link: http://lkml.kernel.org/r/1501157260-3922-1-git-send-email-arvind.yadav.cs@gmail.com
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
Link: http://lkml.kernel.org/r/1501157240-3876-1-git-send-email-arvind.yadav.cs@gmail.com
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
Link: http://lkml.kernel.org/r/1501157221-3832-1-git-send-email-arvind.yadav.cs@gmail.com
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
Link: http://lkml.kernel.org/r/1501157186-3749-1-git-send-email-arvind.yadav.cs@gmail.com
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
Link: http://lkml.kernel.org/r/1501157167-3706-2-git-send-email-arvind.yadav.cs@gmail.com
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit fa06235b8e ("cgroup: reset css on destruction") caused
css_reset callback to be called from the offlining path. Although it
solves the problem mentioned in the commit description ("For instance,
memory cgroup needs to reset memory.low, otherwise pages charged to a
dead cgroup might never get reclaimed."), generally speaking, it's not
correct.
An offline cgroup can still be a resource domain, and we shouldn't grant
it more resources than it had before deletion.
For instance, if an offline memory cgroup has dirty pages, we should
still imply i/o limits during writeback.
The css_reset callback is designed to return the cgroup state into the
original state, that means reset all limits and counters. It's
spomething different from the offlining, and we shouldn't use it from
the offlining path. Instead, we should adjust necessary settings from
the per-controller css_offline callbacks (e.g. reset memory.low).
Link: http://lkml.kernel.org/r/20170727130428.28856-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A removed memory cgroup with a defined memory.low and some belonging
pagecache has very low chances to be freed.
If a cgroup has been removed, there is likely no memory pressure inside
the cgroup, and the pagecache is protected from the external pressure by
the defined low limit. The cgroup will be freed only after the reclaim
of all belonging pages. And it will not happen until there are any
reclaimable memory in the system. That means, there is a good chance,
that a cold pagecache will reside in the memory for an undefined amount
of time, wasting system resources.
This problem was fixed earlier by fa06235b8e ("cgroup: reset css on
destruction"), but it's not a best way to do it, as we can't really
reset all limits/counters during cgroup offlining.
Link: http://lkml.kernel.org/r/20170727130428.28856-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All users of pagevec_lookup() and pagevec_lookup_range() now pass
PAGEVEC_SIZE as a desired number of pages.
Just drop the argument.
Link: http://lkml.kernel.org/r/20170726114704.7626-11-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We want only pages from given range in filemap_range_has_page(),
furthermore we want at most a single page.
So use find_get_pages_range() instead of pagevec_lookup() and remove
unnecessary code.
Link: http://lkml.kernel.org/r/20170726114704.7626-10-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We want only pages from given range in page_cache_seek_hole_data(). Use
pagevec_lookup_range() instead of pagevec_lookup() and remove
unnecessary code.
Note that the check for getting less pages than desired can be removed
because index gets updated by pagevec_lookup_range().
Link: http://lkml.kernel.org/r/20170726114704.7626-9-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We want only pages from given range in remove_inode_hugepages(). Use
pagevec_lookup_range() instead of pagevec_lookup().
Link: http://lkml.kernel.org/r/20170726114704.7626-8-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both occurences of pagevec_lookup() actually want only pages from a
given range. Use pagevec_lookup_range() for the lookup.
Link: http://lkml.kernel.org/r/20170726114704.7626-7-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use pagevec_lookup_range() in ext4_find_unwritten_pgoff() since we are
interested only in pages in the given range. Simplify the logic as a
result of not getting pages out of range and index getting automatically
advanced.
Link: http://lkml.kernel.org/r/20170726114704.7626-6-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit e64855c6cf ("fs: Add helper to clean bdev aliases under a bh
and use it") added a wrapper for clean_bdev_aliases() that invalidates
bdev aliases underlying a single buffer head.
However this has caused a performance regression for bonnie++ benchmark
on ext4 filesystem when delayed allocation is turned off (ext3 mode) -
average of 3 runs:
Hmean SeqOut Char 164787.55 ( 0.00%) 107189.06 (-34.95%)
Hmean SeqOut Block 219883.89 ( 0.00%) 168870.32 (-23.20%)
The reason for this regression is that clean_bdev_aliases() is slower
when called for a single block because pagevec_lookup() it uses will end
up iterating through the radix tree until it finds a page (which may
take a while) but we are only interested whether there's a page at a
particular index.
Fix the problem by using pagevec_lookup_range() instead which avoids the
needless iteration.
Fixes: e64855c6cf ("fs: Add helper to clean bdev aliases under a bh and use it")
Link: http://lkml.kernel.org/r/20170726114704.7626-5-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement a variant of find_get_pages() that stops iterating at given
index. This may be substantial performance gain if the mapping is
sparse. See following commit for details. Furthermore lots of users of
this function (through pagevec_lookup()) actually want a range lookup
and all of them are currently open-coding this.
Also create corresponding pagevec_lookup_range() function.
Link: http://lkml.kernel.org/r/20170726114704.7626-4-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make pagevec_lookup() (and underlying find_get_pages()) update index to
the next page where iteration should continue. Most callers want this
and also pagevec_lookup_tag() already does this.
Link: http://lkml.kernel.org/r/20170726114704.7626-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Ranged pagevec lookup", v2.
In this series I make pagevec_lookup() update the index (to be
consistent with pagevec_lookup_tag() and also as a preparation for
ranged lookups), provide ranged variant of pagevec_lookup() and use it
in places where it makes sense. This not only removes some common code
but is also a measurable performance win for some use cases (see patch
4/10) where radix tree is sparse and searching & grabing of a page after
the end of the range has measurable overhead.
This patch (of 10):
The callback doesn't ever get called. Remove it.
Link: http://lkml.kernel.org/r/20170726114704.7626-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa has reported[1][2][3] that direct reclaimers might get
stuck in too_many_isolated loop basically for ever because the last few
pages on the LRU lists are isolated by the kswapd which is stuck on fs
locks when doing the pageout or slab reclaim. This in turn means that
there is nobody to actually trigger the oom killer and the system is
basically unusable.
too_many_isolated has been introduced by commit 35cd78156c ("vmscan:
throttle direct reclaim when too many pages are isolated already") to
prevent from pre-mature oom killer invocations because back then no
reclaim progress could indeed trigger the OOM killer too early.
But since the oom detection rework in commit 0a0337e0d1 ("mm, oom:
rework oom detection") the allocation/reclaim retry loop considers all
the reclaimable pages and throttles the allocation at that layer so we
can loosen the direct reclaim throttling.
Make shrink_inactive_list loop over too_many_isolated bounded and
returns immediately when the situation hasn't resolved after the first
sleep.
Replace congestion_wait by a simple schedule_timeout_interruptible
because we are not really waiting on the IO congestion in this path.
Please note that this patch can theoretically cause the OOM killer to
trigger earlier while there are many pages isolated for the reclaim
which makes progress only very slowly. This would be obvious from the
oom report as the number of isolated pages are printed there. If we
ever hit this should_reclaim_retry should consider those numbers in the
evaluation in one way or another.
[1] http://lkml.kernel.org/r/201602092349.ACG81273.OSVtMJQHLOFOFF@I-love.SAKURA.ne.jp
[2] http://lkml.kernel.org/r/201702212335.DJB30777.JOFMHSFtVLQOOF@I-love.SAKURA.ne.jp
[3] http://lkml.kernel.org/r/201706300914.CEH95859.FMQOLVFHJFtOOS@I-love.SAKURA.ne.jp
[mhocko@suse.com: switch to uninterruptible sleep]
Link: http://lkml.kernel.org/r/20170724065048.GB25221@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170710074842.23175-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Getting -EBUSY from zs_page_migrate will make migration slow (retry) or
fail (zs_page_putback will schedule_work free_work, but it cannot ensure
the success).
I noticed this issue because my Kernel patched
(https://lkml.org/lkml/2014/5/28/113) that will remove retry in
__alloc_contig_migrate_range.
This retry will handle the -EBUSY because it will re-isolate the page
and re-call migrate_pages. Without it will make cma_alloc fail at once
with -EBUSY.
According to the review from Minchan Kim in
https://lkml.org/lkml/2014/5/28/113, I update the patch to skip
unnecessary loops but not return -EBUSY if zspage is not inuse.
Following is what I got with highalloc-performance in a vbox with 2 cpu
1G memory 512 zram as swap. And the swappiness is set to 100.
ori ne
orig new
Minor Faults 50805113 50830235
Major Faults 43918 56530
Swap Ins 42087 55680
Swap Outs 89718 104700
Allocation stalls 0 0
DMA allocs 57787 52364
DMA32 allocs 47964599 48043563
Normal allocs 0 0
Movable allocs 0 0
Direct pages scanned 45493 23167
Kswapd pages scanned 1565222 1725078
Kswapd pages reclaimed 1342222 1503037
Direct pages reclaimed 45615 25186
Kswapd efficiency 85% 87%
Kswapd velocity 1897.101 1949.042
Direct efficiency 100% 108%
Direct velocity 55.139 26.175
Percentage direct scans 2% 1%
Zone normal velocity 1952.240 1975.217
Zone dma32 velocity 0.000 0.000
Zone dma velocity 0.000 0.000
Page writes by reclaim 89764.000 105233.000
Page writes file 46 533
Page writes anon 89718 104700
Page reclaim immediate 21457 3699
Sector Reads 3259688 3441368
Sector Writes 3667252 3754836
Page rescued immediate 0 0
Slabs scanned 1042872 1160855
Direct inode steals 8042 10089
Kswapd inode steals 54295 29170
Kswapd skipped wait 0 0
THP fault alloc 175 154
THP collapse alloc 226 289
THP splits 0 0
THP fault fallback 11 14
THP collapse fail 3 2
Compaction stalls 536 646
Compaction success 322 358
Compaction failures 214 288
Page migrate success 119608 111063
Page migrate failure 2723 2593
Compaction pages isolated 250179 232652
Compaction migrate scanned 9131832 9942306
Compaction free scanned 2093272 2613998
Compaction cost 192 189
NUMA alloc hit 47124555 47193990
NUMA alloc miss 0 0
NUMA interleave hit 0 0
NUMA alloc local 47124555 47193990
NUMA base PTE updates 0 0
NUMA huge PMD updates 0 0
NUMA page range updates 0 0
NUMA hint faults 0 0
NUMA hint local faults 0 0
NUMA hint local percent 100 100
NUMA pages migrated 0 0
AutoNUMA cost 0% 0%
[akpm@linux-foundation.org: remove newline, per Minchan]
Link: http://lkml.kernel.org/r/1500889535-19648-1-git-send-email-zhuhui@xiaomi.com
Signed-off-by: Hui Zhu <zhuhui@xiaomi.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nadav Amit report zap_page_range only specifies that the caller protect
the VMA list but does not specify whether it is held for read or write
with callers using either. madvise holds mmap_sem for read meaning that
a parallel zap operation can unmap PTEs which are then potentially
skipped by madvise which potentially returns with stale TLB entries
present. While the API could be extended, it would be a difficult API
to use. This patch causes zap_page_range() to always consider flushing
the full affected range. For small ranges or sparsely populated
mappings, this may result in one additional spurious TLB flush. For
larger ranges, it is possible that the TLB has already been flushed and
the overhead is negligible. Either way, this approach is safer overall
and avoids stale entries being present when madvise returns.
This can be illustrated with the following program provided by Nadav
Amit and slightly modified. With the patch applied, it has an exit code
of 0 indicating a stale TLB entry did not leak to userspace.
---8<---
volatile int sync_step = 0;
volatile char *p;
static inline unsigned long rdtsc()
{
unsigned long hi, lo;
__asm__ __volatile__ ("rdtsc" : "=a"(lo), "=d"(hi));
return lo | (hi << 32);
}
static inline void wait_rdtsc(unsigned long cycles)
{
unsigned long tsc = rdtsc();
while (rdtsc() - tsc < cycles);
}
void *big_madvise_thread(void *ign)
{
sync_step = 1;
while (sync_step != 2);
madvise((void*)p, PAGE_SIZE * N_PAGES, MADV_DONTNEED);
}
int main(void)
{
pthread_t aux_thread;
p = mmap(0, PAGE_SIZE * N_PAGES, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
memset((void*)p, 8, PAGE_SIZE * N_PAGES);
pthread_create(&aux_thread, NULL, big_madvise_thread, NULL);
while (sync_step != 1);
*p = 8; // Cache in TLB
sync_step = 2;
wait_rdtsc(100000);
madvise((void*)p, PAGE_SIZE, MADV_DONTNEED);
printf("data: %d (%s)\n", *p, (*p == 8 ? "stale, broken" : "cleared, fine"));
return *p == 8 ? -1 : 0;
}
---8<---
Link: http://lkml.kernel.org/r/20170725101230.5v7gvnjmcnkzzql3@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When walking the page tables to resolve an address that points to
!p*d_present() entry, huge_pte_offset() returns inconsistent values
depending on the level of page table (PUD or PMD).
It returns NULL in the case of a PUD entry while in the case of a PMD
entry, it returns a pointer to the page table entry.
A similar inconsitency exists when handling swap entries - returns NULL
for a PUD entry while a pointer to the pte_t is retured for the PMD
entry.
Update huge_pte_offset() to make the behaviour consistent - return a
pointer to the pte_t for hugepage or swap entries. Only return NULL in
instances where we have a p*d_none() entry and the size parameter
doesn't match the hugepage size at this level of the page table.
Document the behaviour to clarify the expected behaviour of this
function. This is to set clear semantics for architecture specific
implementations of huge_pte_offset().
Discussions on the arm64 implementation of huge_pte_offset()
(http://www.spinics.net/lists/linux-mm/msg133699.html) showed that there
is benefit from returning a pte_t* in the case of p*d_none().
The fault handling code in hugetlb_fault() can handle p*d_none() entries
and saves an extra round trip to huge_pte_alloc(). Other callers of
huge_pte_offset() should be ok as well.
[punit.agrawal@arm.com: v2]
Link: http://lkml.kernel.org/r/20170725154114.24131-2-punit.agrawal@arm.com
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These functions are the only bits of generic code that use
{pud,pmd}_pfn() without checking for CONFIG_TRANSPARENT_HUGEPAGE. This
works fine on x86, the only arch with devmap support, since the *_pfn()
functions are always defined there, but this isn't true for every
architecture.
Link: http://lkml.kernel.org/r/20170626063833.11094-1-oohall@gmail.com
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mremap will attempt to create a 'duplicate' mapping if old_size == 0 is
specified. In the case of private mappings, mremap will actually create
a fresh separate private mapping unrelated to the original. This does
not fit with the design semantics of mremap as the intention is to
create a new mapping based on the original.
Therefore, return EINVAL in the case where an attempt is made to
duplicate a private mapping. Also, print a warning message (once) if
such an attempt is made.
Link: http://lkml.kernel.org/r/cb9d9f6a-7095-582f-15a5-62643d65c736@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
init_pages_in_zone() is run under zone->lock, which means a long lock
time and disabled interrupts on large machines. This is currently not
an issue since it runs early in boot, but a later patch will change
that.
However, like other pfn scanners, we don't actually need zone->lock even
when other cpus are running. The only potentially dangerous operation
here is reading bogus buddy page owner due to race, and we already know
how to handle that. The worst that can happen is that we skip some
early allocated pages, which should not affect the debugging power of
page_owner noticeably.
Link: http://lkml.kernel.org/r/20170720134029.25268-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_ext_init() can take long on large machines, so add a cond_resched()
point after each section is processed. This will allow moving the init
to a later point at boot without triggering lockup reports.
Link: http://lkml.kernel.org/r/20170720134029.25268-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In init_pages_in_zone() we currently use the generic set_page_owner()
function to initialize page_owner info for early allocated pages. This
means we needlessly do lookup_page_ext() twice for each page, and more
importantly save_stack(), which has to unwind the stack and find the
corresponding stack depot handle. Because the stack is always the same
for the initialization, unwind it once in init_pages_in_zone() and reuse
the handle. Also avoid the repeated lookup_page_ext().
This can significantly reduce boot times with page_owner=on on large
machines, especially for kernels built without frame pointer, where the
stack unwinding is noticeably slower.
[vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko]
[akpm@linux-foundation.org: coding-style fixes]
[vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal]
Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz
Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f52407ce2d ("memory hotplug: alloc page from other node in
memory online") has introduced N_HIGH_MEMORY checks to only use NUMA
aware allocations when there is some memory present because the
respective node might not have any memory yet at the time and so it
could fail or even OOM.
Things have changed since then though. Zonelists are now always
initialized before we do any allocations even for hotplug (see
959ecc48fc ("mm/memory_hotplug.c: fix building of node hotplug
zonelist")).
Therefore these checks are not really needed. In fact caller of the
allocator should never care about whether the node is populated because
that might change at any time.
Link: http://lkml.kernel.org/r/20170721143915.14161-10-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zonelists_mutex was introduced by commit 4eaf3f6439 ("mem-hotplug: fix
potential race while building zonelist for new populated zone") to
protect zonelist building from races. This is no longer needed though
because both memory online and offline are fully serialized. New users
have grown since then.
Notably setup_per_zone_wmarks wants to prevent from races between memory
hotplug, khugepaged setup and manual min_free_kbytes update via sysctl
(see cfd3da1e49 ("mm: Serialize access to min_free_kbytes"). Let's
add a private lock for that purpose. This will not prevent from seeing
halfway through memory hotplug operation but that shouldn't be a big
deal becuse memory hotplug will update watermarks explicitly so we will
eventually get a full picture. The lock just makes sure we won't race
when updating watermarks leading to weird results.
Also __build_all_zonelists manipulates global data so add a private lock
for it as well. This doesn't seem to be necessary today but it is more
robust to have a lock there.
While we are at it make sure we document that memory online/offline
depends on a full serialization either via mem_hotplug_begin() or
device_lock.
Link: http://lkml.kernel.org/r/20170721143915.14161-9-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Haicheng Li <haicheng.li@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
build_all_zonelists has been (ab)using stop_machine to make sure that
zonelists do not change while somebody is looking at them. This is is
just a gross hack because a) it complicates the context from which we
can call build_all_zonelists (see 3f906ba236 ("mm/memory-hotplug:
switch locking to a percpu rwsem")) and b) is is not really necessary
especially after "mm, page_alloc: simplify zonelist initialization" and
c) it doesn't really provide the protection it claims (see below).
Updates of the zonelists happen very seldom, basically only when a zone
becomes populated during memory online or when it loses all the memory
during offline. A racing iteration over zonelists could either miss a
zone or try to work on one zone twice. Both of these are something we
can live with occasionally because there will always be at least one
zone visible so we are not likely to fail allocation too easily for
example.
Please note that the original stop_machine approach doesn't really
provide a better exclusion because the iteration might be interrupted
half way (unless the whole iteration is preempt disabled which is not
the case in most cases) so the some zones could still be seen twice or a
zone missed.
I have run the pathological online/offline of the single memblock in the
movable zone while stressing the same small node with some memory
pressure.
Node 1, zone DMA
pages free 0
min 0
low 0
high 0
spanned 0
present 0
managed 0
protection: (0, 943, 943, 943)
Node 1, zone DMA32
pages free 227310
min 8294
low 10367
high 12440
spanned 262112
present 262112
managed 241436
protection: (0, 0, 0, 0)
Node 1, zone Normal
pages free 0
min 0
low 0
high 0
spanned 0
present 0
managed 0
protection: (0, 0, 0, 1024)
Node 1, zone Movable
pages free 32722
min 85
low 117
high 149
spanned 32768
present 32768
managed 32768
protection: (0, 0, 0, 0)
root@test1:/sys/devices/system/node/node1# while true
do
echo offline > memory34/state
echo online_movable > memory34/state
done
root@test1:/mnt/data/test/linux-3.7-rc5# numactl --preferred=1 make -j4
and it survived without any unexpected behavior. While this is not
really a great testing coverage it should exercise the allocation path
quite a lot.
Link: http://lkml.kernel.org/r/20170721143915.14161-8-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
build_zonelists gradually builds zonelists from the nearest to the most
distant node. As we do not know how many populated zones we will have
in each node we rely on the _zoneref to terminate initialized part of
the zonelist by a NULL zone. While this is functionally correct it is
quite suboptimal because we cannot allow updaters to race with zonelists
users because they could see an empty zonelist and fail the allocation
or hit the OOM killer in the worst case.
We can do much better, though. We can store the node ordering into an
already existing node_order array and then give this array to
build_zonelists_in_node_order and do the whole initialization at once.
zonelists consumers still might see halfway initialized state but that
should be much more tolerateable because the list will not be empty and
they would either see some zone twice or skip over some zone(s) in the
worst case which shouldn't lead to immediate failures.
While at it let's simplify build_zonelists_node which is rather
confusing now. It gets an index into the zoneref array and returns the
updated index for the next iteration. Let's rename the function to
build_zonerefs_node to better reflect its purpose and give it zoneref
array to update. The function doesn't the index anymore. It just
returns the number of added zones so that the caller can advance the
zonered array start for the next update.
This patch alone doesn't introduce any functional change yet, though, it
is merely a preparatory work for later changes.
Link: http://lkml.kernel.org/r/20170721143915.14161-7-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
try_online_node calls hotadd_new_pgdat which already calls
build_all_zonelists. So the additional call is redundant. Even though
hotadd_new_pgdat will only initialize zonelists of the new node this is
the right thing to do because such a node doesn't have any memory so
other zonelists would ignore all the zones from this node anyway.
Link: http://lkml.kernel.org/r/20170721143915.14161-6-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
build_all_zonelists gets a zone parameter to initialize zone's pagesets.
There is only a single user which gives a non-NULL zone parameter and
that one doesn't really need the rest of the build_all_zonelists (see
commit 6dcd73d701 ("memory-hotplug: allocate zone's pcp before
onlining pages")).
Therefore remove setup_zone_pageset from build_all_zonelists and call it
from its only user directly. This will also remove a pointless zonlists
rebuilding which is always good.
Link: http://lkml.kernel.org/r/20170721143915.14161-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__build_all_zonelists reinitializes each online cpu local node for
CONFIG_HAVE_MEMORYLESS_NODES. This makes sense because previously
memory less nodes could gain some memory during memory hotplug and so
the local node should be changed for CPUs close to such a node. It
makes less sense to do that unconditionally for a newly creaded NUMA
node which is still offline and without any memory.
Let's also simplify the cpu loop and use for_each_online_cpu instead of
an explicit cpu_online check for all possible cpus.
Link: http://lkml.kernel.org/r/20170721143915.14161-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
boot_pageset is a boot time hack which gets superseded by normal
pagesets later in the boot process. It makes zero sense to reinitialize
it again and again during memory hotplug.
Link: http://lkml.kernel.org/r/20170721143915.14161-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "cleanup zonelists initialization", v1.
This is aimed at cleaning up the zonelists initialization code we have
but the primary motivation was bug report [2] which got resolved but the
usage of stop_machine is just too ugly to live. Most patches are
straightforward but 3 of them need a special consideration.
Patch 1 removes zone ordered zonelists completely. I am CCing linux-api
because this is a user visible change. As I argue in the patch
description I do not think we have a strong usecase for it these days.
I have kept sysctl in place and warn into the log if somebody tries to
configure zone lists ordering. If somebody has a real usecase for it we
can revert this patch but I do not expect anybody will actually notice
runtime differences. This patch is not strictly needed for the rest but
it made patch 6 easier to implement.
Patch 7 removes stop_machine from build_all_zonelists without adding any
special synchronization between iterators and updater which I _believe_
is acceptable as explained in the changelog. I hope I am not missing
anything.
Patch 8 then removes zonelists_mutex which is kind of ugly as well and
not really needed AFAICS but a care should be taken when double checking
my thinking.
This patch (of 9):
Supporting zone ordered zonelists costs us just a lot of code while the
usefulness is arguable if existent at all. Mel has already made node
ordering default on 64b systems. 32b systems are still using
ZONELIST_ORDER_ZONE because it is considered better to fallback to a
different NUMA node rather than consume precious lowmem zones.
This argument is, however, weaken by the fact that the memory reclaim
has been reworked to be node rather than zone oriented. This means that
lowmem requests have to skip over all highmem pages on LRUs already and
so zone ordering doesn't save the reclaim time much. So the only
advantage of the zone ordering is under a light memory pressure when
highmem requests do not ever hit into lowmem zones and the lowmem
pressure doesn't need to reclaim.
Considering that 32b NUMA systems are rather suboptimal already and it
is generally advisable to use 64b kernel on such a HW I believe we
should rather care about the code maintainability and just get rid of
ZONELIST_ORDER_ZONE altogether. Keep systcl in place and warn if
somebody tries to set zone ordering either from kernel command line or
the sysctl.
[mhocko@suse.com: reading vm.numa_zonelist_order will never terminate]
Link: http://lkml.kernel.org/r/20170721143915.14161-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds document and kconfig for using of writeback feature.
Link: http://lkml.kernel.org/r/1498459987-24562-10-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch enables read IO from backing device. For the feature, it
implements two IO read functions to transfer data from backing storage.
One is asynchronous IO function and other is synchronous one.
A reason I need synchrnous IO is due to partial write which need to
complete read IO before the overwriting partial data.
We can make the partial IO's case asynchronous, too but at the moment, I
don't feel adding more complexity to support such rare use cases so want
to go with simple.
[xieyisheng1@huawei.com: read_from_bdev_async(): return 1 to avoid call page_endio() in zram_rw_page()]
Link: http://lkml.kernel.org/r/1502707447-6944-1-git-send-email-xieyisheng1@huawei.com
Link: http://lkml.kernel.org/r/1498459987-24562-9-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch enables write IO to transfer data to backing device. For
that, it implements write_to_bdev function which creates new bio and
chaining with parent bio to make the parent bio asynchrnous.
For rw_page which don't have parent bio, it submit owned bio and handle
IO completion by zram_page_end_io.
Also, this patch defines new flag ZRAM_WB to mark written page for later
read IO.
[xieyisheng1@huawei.com: fix typo in comment]
Link: http://lkml.kernel.org/r/1502707447-6944-2-git-send-email-xieyisheng1@huawei.com
Link: http://lkml.kernel.org/r/1498459987-24562-8-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For upcoming asynchronous IO like writeback, zram_rw_page should be
aware of that whether requested IO was completed or submitted
successfully, otherwise error.
For the goal, zram_bvec_rw has three return values.
-errno: returns error number
0: IO request is done synchronously
1: IO request is issued successfully.
Link: http://lkml.kernel.org/r/1498459987-24562-7-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With backing device, zram needs management of free space of backing
device.
This patch adds bitmap logic to manage free space which is very naive.
However, it would be simple enough as considering uncompressible pages's
frequenty in zram.
Link: http://lkml.kernel.org/r/1498459987-24562-6-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For writeback feature, user should set up backing device before the zram
working.
This patch enables the interface via /sys/block/zramX/backing_dev.
Currently, it supports block device only but it could be enhanced for
file as well.
Link: http://lkml.kernel.org/r/1498459987-24562-5-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zram_decompress_page naming is not proper because it doesn't decompress
if page was dedup hit or stored with compression.
Use more abstract term and consistent with write path function
__zram_bvec_write.
Link: http://lkml.kernel.org/r/1498459987-24562-4-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zram_compress does several things, compress, entry alloc and check
limitation. I did for just readbility but it hurts modulization.:(
So this patch removes zram_compress functions and inline it in
__zram_bvec_write for upcoming patches.
Link: http://lkml.kernel.org/r/1498459987-24562-3-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "writeback incompressible pages to storage", v1.
zRam is useful for memory saving with compressible pages but sometime,
workload can be changed and system has lots of incompressible pages
which is very harmful for zram.
This patch supports writeback feature of zram so admin can set up a
block device and with it, zram can save the memory via writing out the
incompressile pages once it found it's incompressible pages (1/4 comp
ratio) instead of keeping the page in memory.
[1-3] is just clean up and [4-8] is step by step feature enablement.
[4-8] is logically not bisectable(ie, logical unit separation)
although I tried to compiled out without breaking but I think it would
be better to review.
This patch (of 9):
__zram_bvec_write has some of duplicated logic for zram meta data
handling of same_page|compressed_page. This patch aims to clean it up
without behavior change.
[xieyisheng1@huawei.com: fix compr_data_size stat]
Link: http://lkml.kernel.org/r/1502707447-6944-1-git-send-email-xieyisheng1@huawei.com
Link: http://lkml.kernel.org/r/1496019048-27016-1-git-send-email-minchan@kernel.org
Link: http://lkml.kernel.org/r/1498459987-24562-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Juneho Choi <juno.choi@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Historically we have enforced that any kernel zone (e.g ZONE_NORMAL) has
to precede the Movable zone in the physical memory range. The purpose
of the movable zone is, however, not bound to any physical memory
restriction. It merely defines a class of migrateable and reclaimable
memory.
There are users (e.g. CMA) who might want to reserve specific physical
memory ranges for their own purpose. Moreover our pfn walkers have to
be prepared for zones overlapping in the physical range already because
we do support interleaving NUMA nodes and therefore zones can interleave
as well. This means we can allow each memory block to be associated
with a different zone.
Loosen the current onlining semantic and allow explicit onlining type on
any memblock. That means that online_{kernel,movable} will be allowed
regardless of the physical address of the memblock as long as it is
offline of course. This might result in moveble zone overlapping with
other kernel zones. Default onlining then becomes a bit tricky but
still sensible. echo online > memoryXY/state will online the given
block to
1) the default zone if the given range is outside of any zone
2) the enclosing zone if such a zone doesn't interleave with
any other zone
3) the default zone if more zones interleave for this range
where default zone is movable zone only if movable_node is enabled
otherwise it is a kernel zone.
Here is an example of the semantic with (movable_node is not present but
it work in an analogous way). We start with following memblocks, all of
them offline:
memory34/valid_zones:Normal Movable
memory35/valid_zones:Normal Movable
memory36/valid_zones:Normal Movable
memory37/valid_zones:Normal Movable
memory38/valid_zones:Normal Movable
memory39/valid_zones:Normal Movable
memory40/valid_zones:Normal Movable
memory41/valid_zones:Normal Movable
Now, we online block 34 in default mode and block 37 as movable
root@test1:/sys/devices/system/node/node1# echo online > memory34/state
root@test1:/sys/devices/system/node/node1# echo online_movable > memory37/state
memory34/valid_zones:Normal
memory35/valid_zones:Normal Movable
memory36/valid_zones:Normal Movable
memory37/valid_zones:Movable
memory38/valid_zones:Normal Movable
memory39/valid_zones:Normal Movable
memory40/valid_zones:Normal Movable
memory41/valid_zones:Normal Movable
As we can see all other blocks can still be onlined both into Normal and
Movable zones and the Normal is default because the Movable zone spans
only block37 now.
root@test1:/sys/devices/system/node/node1# echo online_movable > memory41/state
memory34/valid_zones:Normal
memory35/valid_zones:Normal Movable
memory36/valid_zones:Normal Movable
memory37/valid_zones:Movable
memory38/valid_zones:Movable Normal
memory39/valid_zones:Movable Normal
memory40/valid_zones:Movable Normal
memory41/valid_zones:Movable
Now the default zone for blocks 37-41 has changed because movable zone
spans that range.
root@test1:/sys/devices/system/node/node1# echo online_kernel > memory39/state
memory34/valid_zones:Normal
memory35/valid_zones:Normal Movable
memory36/valid_zones:Normal Movable
memory37/valid_zones:Movable
memory38/valid_zones:Normal Movable
memory39/valid_zones:Normal
memory40/valid_zones:Movable Normal
memory41/valid_zones:Movable
Note that the block 39 now belongs to the zone Normal and so block38
falls into Normal by default as well.
For completness
root@test1:/sys/devices/system/node/node1# for i in memory[34]?
do
echo online > $i/state 2>/dev/null
done
memory34/valid_zones:Normal
memory35/valid_zones:Normal
memory36/valid_zones:Normal
memory37/valid_zones:Movable
memory38/valid_zones:Normal
memory39/valid_zones:Normal
memory40/valid_zones:Movable
memory41/valid_zones:Movable
Implementation wise the change is quite straightforward. We can get rid
of allow_online_pfn_range altogether. online_pages allows only offline
nodes already. The original default_zone_for_pfn will become
default_kernel_zone_for_pfn. New default_zone_for_pfn implements the
above semantic. zone_for_pfn_range is slightly reorganized to implement
kernel and movable online type explicitly and MMOP_ONLINE_KEEP becomes a
catch all default behavior.
Link: http://lkml.kernel.org/r/20170714121233.16861-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Kani Toshimitsu <toshi.kani@hpe.com>
Cc: <slaoub@gmail.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prior to commit f1dd2cd13c ("mm, memory_hotplug: do not associate
hotadded memory to zones until online") we used to allow to change the
valid zone types of a memory block if it is adjacent to a different zone
type.
This fact was reflected in memoryNN/valid_zones by the ordering of
printed zones. The first one was default (echo online > memoryNN/state)
and the other one could be onlined explicitly by online_{movable,kernel}.
This behavior was removed by the said patch and as such the ordering was
not all that important. In most cases a kernel zone would be default
anyway. The only exception is movable_node handled by "mm,
memory_hotplug: support movable_node for hotpluggable nodes".
Let's reintroduce this behavior again because later patch will remove
the zone overlap restriction and so user will be allowed to online
kernel resp. movable block regardless of its placement. Original
behavior will then become significant again because it would be
non-trivial for users to see what is the default zone to online into.
Implementation is really simple. Pull out zone selection out of
move_pfn_range into zone_for_pfn_range helper and use it in
show_valid_zones to display the zone for default onlining and then both
kernel and movable if they are allowed. Default online zone is not
duplicated.
Link: http://lkml.kernel.org/r/20170714121233.16861-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Kani Toshimitsu <toshi.kani@hpe.com>
Cc: <slaoub@gmail.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9adb62a5df ("mm/hotplug: correctly setup fallback zonelists
when creating new pgdat") tries to build the correct zonelist for a
newly added node, while it is not necessary to rebuild it for already
exist nodes.
In build_zonelists(), it will iterate on nodes with memory. For a newly
added node, it will have memory until node_states_set_node() is called
in online_pages().
This patch avoids rebuilding the zonelists for already existing nodes.
build_zonelists_node() uses managed_zone(zone) checks, so it should not
include empty zones anyway. So effectively we avoid some pointless work
under stop_machine().
[akpm@linux-foundation.org: tweak comment text]
[akpm@linux-foundation.org: coding-style tweak, per Vlastimil]
Link: http://lkml.kernel.org/r/20170626035822.50155-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shrink_slab() allows us to report back the number of objects we
successfully scanned (out of the target shrinkctl->nr_to_scan). As
report the number of pages owned by each GEM object as a separate item
to the shrinker, we cannot precisely control the number of shrinker
objects we scan on each pass; and indeed may free more than requested.
If we fail to tell the shrinker about the number of objects we process,
it will continue to hold a grudge against us as any objects left
unscanned are added to the next reclaim -- and so we will keep on
"unfairly" shrinking our own slab in comparison to other slabs.
Link: http://lkml.kernel.org/r/20170822135325.9191-2-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
