The K2E MDIO io space has different start address.
Hence, fix it to be 0x24200f00 according to TRM.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Keystone supports dma-coherent on USB master and also needs
dma-ranges to specify the hardware alias memory range in which DMA
can be operational.
Such configuration applied for USB0 devices, but It's missed for
USB1 device which is present only in K2E SoC - hence apply it.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The IO range size is set incorrectly for USB PHY0 deivice
it should be 24 instead of 32. Otherwise, It causes
USB PHY1 probing failure.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Pull ARM fixes from Russell King:
"Some further ARM fixes:
- another build fix for the kprobes test code
- a fix for no kuser helpers for the set_tls code, which oopsed on
noMMU hardware
- a fix for alignment handler with neon opcodes being misinterpreted
- turning off the hardware access support, which is not implemented
- a build fix for the v7 coherency exiting code, which can be built
in non-v7 environments (but still only executed on v7 CPUs)"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8179/1: kprobes-test: Fix compile error "bad immediate value for offset"
ARM: 8178/1: fix set_tls for !CONFIG_KUSER_HELPERS
ARM: 8177/1: cacheflush: Fix v7_exit_coherency_flush exynos build breakage on ARMv6
ARM: 8165/1: alignment: don't break misaligned NEON load/store
ARM: 8164/1: mm: clear SCTLR.HA instead of setting it for LPAE
The ranges property for a host bridge controller in DT describes the
mapping between the PCI bus address and the CPU physical address. The
resources framework however expects that the IO resources start at a pseudo
"port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The
conversion from PCI ranges to resources failed to take that into account,
returning a CPU physical address instead of a port number.
Also fix all the drivers that depend on the old behaviour by fetching the
CPU physical address based on the port number where it is being needed.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Simon Horman <horms@verge.net.au>
CC: Catalin Marinas <catalin.marinas@arm.com>
This patch enables the Ethernet port on the Marvell Berlin2Q DMP board.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the Ethernet node, enabling the network unit on Berlin
BG2Q SoCs.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Transition the PXA27x CPUs to the clock framework.
This transition still enables legacy platforms to run without device
tree as before, ie relying on platform data encoded in board specific
files.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add the clock tree description for the PXA27x based boards.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add missing bits for CCCR and CCSR :
- CPLL and PPLL selection, either full speed or 13MHz
- CPSR masks
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This is needed for calls into OF code that parses PCI ranges. It signals
support for memory mapped PCI I/O accesses that are described by device
trees.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
CC: Russell King <linux@arm.linux.org.uk>
CC: Rob Herring <robh+dt@kernel.org>
When compiling kprobes-test-arm.c the following error has been observed
/tmp/ccoT403o.s:21439: Error: bad immediate value for offset (4168)
This is caused by the compiler spilling it's literal pool too far away
from the site which is trying to reference it with a PC relative load.
This arises because the compiler is underestimating the size of the
inline assembler code present, which apparently it approximates as 4
bytes per line or instruction.
We fix this problem by moving the operations which generate more than
4 bytes out of the text section. Specifically, moving the .ascii
directives to the .rodata section.
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Joachim Eastwood reports that commit fbfb872f5f "ARM: 8148/1: flush
TLS and thumbee register state during exec" causes a boot-time crash
on a Cortex-M4 nommu system:
Freeing unused kernel memory: 68K (281e5000 - 281f6000)
Unhandled exception: IPSR = 00000005 LR = fffffff1
CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-rc6-00313-gd2205fa30aa7 #191
task: 29834000 ti: 29832000 task.ti: 29832000
PC is at flush_thread+0x2e/0x40
LR is at flush_thread+0x21/0x40
pc : [<2800954a>] lr : [<2800953d>] psr: 4100000b
sp : 29833d60 ip : 00000000 fp : 00000001
r10: 00003cf8 r9 : 29b1f000 r8 : 00000000
r7 : 29b0bc00 r6 : 29834000 r5 : 29832000 r4 : 29832000
r3 : ffff0ff0 r2 : 29832000 r1 : 00000000 r0 : 282121f0
xPSR: 4100000b
CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-rc6-00313-gd2205fa30aa7 #191
[<2800afa5>] (unwind_backtrace) from [<2800a327>] (show_stack+0xb/0xc)
[<2800a327>] (show_stack) from [<2800a963>] (__invalid_entry+0x4b/0x4c)
The problem is that set_tls is attempting to clear the TLS location in
the kernel-user helper page, which isn't set up on V7M.
Fix this by guarding the write to the kuser helper page with
a CONFIG_KUSER_HELPERS ifdef.
Fixes: fbfb872f5f ARM: 8148/1: flush TLS and thumbee register state during exec
Reported-by: Joachim Eastwood <manabian@gmail.com>
Tested-by: Joachim Eastwood <manabian@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This fixes build breakage of platsmp.c if ARMv6 was chosen for compile
time options (e.g. by building allmodconfig):
$ make allmodconfig
$ make
CC arch/arm/mach-exynos/platsmp.o
/tmp/ccdQM0Eg.s: Assembler messages:
/tmp/ccdQM0Eg.s:432: Error: selected processor does not support ARM mode `isb '
/tmp/ccdQM0Eg.s:437: Error: selected processor does not support ARM mode `isb '
/tmp/ccdQM0Eg.s:438: Error: selected processor does not support ARM mode `dsb '
make[1]: *** [arch/arm/mach-exynos/platsmp.o] Error 1
The error was introduced in commit "ARM: EXYNOS: Move code from
hotplug.c to platsmp.c". Previously code using
v7_exit_coherency_flush() macro was built with '-march=armv7-a' flag but
this flag dissapeared during the movement.
Fix this by annotating the v7_exit_coherency_flush() asm code with
armv7-a architecture.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Mark Brown <broonie@kernel.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
There are 2 MACIDs stored in the control module of the am33xx. These are
read by the cpsw driver if no valid MACID was found in the devicetree.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some platforms with no power management capabilities, the hotplug
implementation is allowed to return from a smp_ops.cpu_die() call as a
function return. Upon a CPU onlining event, the KVM CPU notifier tries
to reinstall the hyp stub, which fails on platform where no reset took
place following a hotplug event, with the message:
CPU1: smp_ops.cpu_die() returned, trying to resuscitate
CPU1: Booted secondary processor
Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x80409540
unexpected data abort in Hyp mode at: 0x80401fe8
unexpected HVC/SVC trap in Hyp mode at: 0x805c6170
since KVM code is trying to reinstall the stub on a system where it is
already configured.
To prevent this issue, this patch adds a check in the KVM hotplug
notifier that detects if the HYP stub really needs re-installing when a
CPU is onlined and skips the installation call if the stub is already in
place, which means that the CPU has not been reset.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Previously, the TI clock driver initialized all the clocks hierarchically
under each separate clock provider node. Now, each clock that requires
IO access will instead check their parent node to find out which IO range
to use.
This patch allows the TI clock driver to use a few new features provided
by the generic of_clk_init, and also allows registration of clock nodes
outside the clock hierarchy (for example, any external clocks.)
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Stefan Assmann <sassmann@kpanic.de>
Acked-by: Tony Lindgren <tony@atomide.com>
The arch_timer_evtstrm_enable hooks in arm and arm64 are substantially
similar, the only difference being a CONFIG_COMPAT-conditional section
which is relevant only for arm64. Copy the arm64 version to the
driver, removing the arch-specific hooks.
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
The only difference between arm and arm64's implementations of
arch_counter_set_user_access is that 32-bit ARM does not enable user
access to the virtual counter. We want to enable this access for the
32-bit ARM VDSO, so copy the arm64 version to the driver itself, and
remove the arch-specific implementations.
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Here's our last set of fixes for 3.17. Most of these are for TI platforms,
fixing some noisy Kconfig issues, runtime clock and power issues on
several platforms and NAND timings on DRA7.
There are also a couple of bug fixes for i.MX, one for QCOM and a small
fix to avoid section mismatch noise on PXA.
Diffstat looks large, partially due to some tables being updated and
thus touching many lines. The qcom gsbi change also restructures clock
management a bit and thus touches a bunch of lines.
All in all, a bit more changes than we'd like at this point, but nothing
stands out as risky either so it seems like the right thing to send it
up now instead of holding it to the merge window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=K6xV
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Here's our last set of fixes for 3.17. Most of these are for TI
platforms, fixing some noisy Kconfig issues, runtime clock and power
issues on several platforms and NAND timings on DRA7.
There are also a couple of bug fixes for i.MX, one for QCOM and a
small fix to avoid section mismatch noise on PXA.
Diffstat looks large, partially due to some tables being updated and
thus touching many lines. The qcom gsbi change also restructures
clock management a bit and thus touches a bunch of lines.
All in all, a bit more changes than we'd like at this point, but
nothing stands out as risky either so it seems like the right thing to
send it up now instead of holding it to the merge window"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
drivers/soc: qcom: do not disable the iface clock in probe
ARM: imx: fix .is_enabled() of shared gate clock
ARM: OMAP3: Fix I/O chain clock line assertion timed out error
ARM: keystone: dts: fix bindings for pcie and usb clock nodes
bus: omap_l3_noc: Fix connID for OMAP4
ARM: DT: imx53: fix lvds channel 1 port
ARM: dts: cm-t54: fix serial console power supply.
ARM: dts: dra7-evm: Fix NAND GPMC timings
ARM: pxa: fix section mismatch warning for pxa_timer_nodt_init
ARM: OMAP: Fix Kconfig warning for omap1
The most important part of this serie is the addition of the phase API to
handle the MMC clocks in the Allwinner SoCs.
Apart from that, the A23 gained a new mbus driver, and there's a fix for a
incorrect divider table on the APB0 clock.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZkI9
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clocks-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next
Allwinner Clocks Additions for 3.18
The most important part of this serie is the addition of the phase API to
handle the MMC clocks in the Allwinner SoCs.
Apart from that, the A23 gained a new mbus driver, and there's a fix for a
incorrect divider table on the APB0 clock.
This includes a bunch of changes:
- Support read-only memory slots on arm/arm64
- Various changes to fix Sparse warnings
- Correctly detect write vs. read Stage-2 faults
- Various VGIC cleanups and fixes
- Dynamic VGIC data strcuture sizing
- Fix SGI set_clear_pend offset bug
- Fix VTTBR_BADDR Mask
- Correctly report the FSC on Stage-2 faults
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUJWAdAAoJEEtpOizt6ddy9cMH+gIoUPnRJLe+PPcOOyxOx6pr
+CnD/zAd0sLvxZLP/LBOzu99H3YrbO5kwI/172/8G1zUNI2hp6YxEEJaBCTHrz6l
RwgLy7a3EMMY51nJo5w2dkFUo8cUX9MsHqMpl2Xb7Dvo2ZHp+nDqRjwRY6yi+t4V
dWSJTRG6X+DIWyysij6jBtfKU6MpU+4NW3Zdk1fapf8QDkn+cBtV5X2QcmERCaIe
A1j9hiGi43KA3XWeeePU3aVaxC2XUhTayP8VsfVxoNG2manaS6lqjmbif5ghs/0h
rw7R3/Aj0MJny2zT016MkvKJKRukuVRD6e1lcYghqnSJhL2FossowZ9fHRADpqU=
=QgU8
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next
Changes for KVM for arm/arm64 for 3.18
This includes a bunch of changes:
- Support read-only memory slots on arm/arm64
- Various changes to fix Sparse warnings
- Correctly detect write vs. read Stage-2 faults
- Various VGIC cleanups and fixes
- Dynamic VGIC data strcuture sizing
- Fix SGI set_clear_pend offset bug
- Fix VTTBR_BADDR Mask
- Correctly report the FSC on Stage-2 faults
Conflicts:
virt/kvm/eventfd.c
[duplicate, different patch where the kvm-arm version broke x86.
The kvm tree instead has the right one]
Now that we have a compatible of its own for the mbus clock, switch to it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
The warning was introduced in 2009 (commit 4bf1fa5a34 ([ARM] 5613/1:
implement CALLER_ADDRESSx)). The only "problem" here is that
CALLER_ADDRESSx for x > 1 returns NULL which doesn't do much harm.
The drawback of implementing a fix (i.e. use unwind tables to implement CALLER_ADDRESSx) is that much of the unwinder code would need to be marked as not
traceable.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Syntactically FOOTBRIDGE and ARCH_FOOTBRIDGE are identical (the former
is defined in an if ARCH_FOOTBRIDGE block and the latter selects the
former).
Sematically FOOTBRIDGE means "we have a DC21285 (aka footbridge) device
in the system" and ARCH_FOOTBRIDGE is the support for boards with a
footbridge device, so ARCH_FOOTBRIDGE is the better symbol here.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
With compilers which follow the C99 standard (like modern versions of gcc and
clang), "extern inline" does the wrong thing (emits code for an externally
linkable version of the inline function). In this case using static inline
and removing the NULL version of return_address in return_address.c does
the right thing.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The sigpage is currently placed alongside shared libraries etc in the
address space. Similar to what x86_64 does for its VDSO, place the
sigpage at a randomized offset above the stack so that learning the
base address of the sigpage doesn't help expose where shared libraries
are loaded in the address space (and vice versa).
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
_install_special_mapping allows the VMA to be identifed in
/proc/pid/maps without the use of arch_vma_name, providing a
slight net reduction in object size:
text data bss dec hex filename
2996 96 144 3236 ca4 arch/arm/kernel/process.o (before)
2956 104 144 3204 c84 arch/arm/kernel/process.o (after)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Enable gcov support for ARM based on original patches by David
Singleton and George G. Davis
Riku - updated to patch to current mainline kernel. The patch
has been submitted in 2010, 2012 - for symmetry, now in 2014 too.
https://lwn.net/Articles/390419/http://marc.info/?l=linux-arm-kernel&m=133823081813044
v2: remove arch/arm/kernel from gcov disabled files
Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Vincent Sanders <vincent.sanders@collabora.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
If we are not changing the control register value, avoid writing to it.
Writes to the control register can be very expensive, taking around a
hundred cycles or so.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Use the more common pr_warn.
Other miscellanea:
o Coalesce formats
o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When we catch something that's not a permission fault or a translation
fault, we log the unsupported FSC in the kernel log, but we were masking
off the bottom bits of the FSC which was not very helpful.
Also correctly report the FSC for data and instruction faults rather
than telling people it was a DFCS, which doesn't exist in the ARM ARM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
The current aarch64 calculation for VTTBR_BADDR_MASK masks only 39 bits
and not all the bits in the PA range. This is clearly a bug that
manifests itself on systems that allocate memory in the higher address
space range.
[ Modified from Joel's original patch to be based on PHYS_MASK_SHIFT
instead of a hard-coded value and to move the alignment check of the
allocation to mmu.c. Also added a comment explaining why we hardcode
the IPA range and changed the stage-2 pgd allocation to be based on
the 40 bit IPA range instead of the maximum possible 48 bit PA range.
- Christoffer ]
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Joel Schopp <joel.schopp@amd.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Apparently most of the newly added nodes had the same problem,
so instead of reverting the individual patches, this undoes
the effect of the merge and backs out all of them at once.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two of the recent patches each added support for CPU_FREQ, which
causes a kconfig warning:
arch/arm/configs/multi_v7_defconfig:443:warning: override: reassigning to symbol CPU_FREQ
This removes one of the two in order to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The newly introduced support for SAMA5D4 added access to the
'AT91_ALT_BASE_SYS' register area, but failed to define the
symbols in the case when CONFIG_MMU is disabled.
We really should not hardwire addresses like this any more,
but as a small fixup, this patch just adds the missing
definitions for the nommu case, which gets at91x40_defconfig
and any configuration of sam9 and sama5 with MMU disabled
back to work.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 726d32bf79 ("ARM: at91: SAMA5D4 SoC detection code and low ...")
Implementing a restart handler in a module don't make sense as there would
be no guarantee that the module is loaded when a restart is needed.
Unexport arm_pm_restart to ensure that no one gets the idea to do it
anyway.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kernel core now supports a restart handler call chain for system
restart functions.
With this change, the arm_pm_restart callback is now optional, so drop its
initialization and check if it is set before calling it. Only call the
kernel restart handler if arm_pm_restart is not set.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit 610bd8722e.
"ARM: dts: hix5hd2: add wdg node" causes a build breakage due to
an undefined constatns:
Error: arch/arm/boot/dts/hisi-x5hd2.dtsi:374.22-23 syntax error
(Don't you just looove the dtc error messages? They are so informative!)
Signed-off-by: Olof Johansson <olof@lixom.net>
- mmc pinmux for at91sam9263 was missing
- little fix of the old clock implementation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUIvtbAAoJEAf03oE53VmQMP4H/1e3NM8xP6ePHSDzYW/SyqGx
IdFJwRff/FlHTzx23jND6z9SJDLTDu7NhUtABEsOIN+uJ28Vg9FLSR5+XqOfpbGt
UH9M2Xxla0WClIUzNDcDTyX56vo/TT0M1lnfh7IvP4yR0iWghbvDIWj/4L5Zl52n
bU1Ac+Spz4kuSShb6PSLxWfZXY7rlEFZbdOUd0ju2AqgLGbf+GeEWl4JcyPBb0id
MrS2YN5yO+0Ts72QPX7mSDS+RCzTm5ncIw6aLfgJzC0vWWvV6AXn6w6nYNUm/o4+
BlHZLHYOPVOLoz+uQE9biKcWeZhMR1orWkcIGXxfzao2cOm5WGa3CkuLd+dol2g=
=VQv1
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-non-critical' of git://github.com/at91linux/linux-at91 into next/fixes-non-critical
Pull "Fixes non critical for AT91" from Nicolas Ferre:
- mmc pinmux for at91sam9263 was missing
- little fix of the old clock implementation
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-fixes-non-critical' of git://github.com/at91linux/linux-at91:
ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks
ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings
The ASM below does not compile with clang and is not the way that the mcr
command is used in other parts of the kernel.
arch/arm/mach-vt8500/vt8500.c:72:11: error: invalid % escape in inline assembly string
asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
There are other forms that are supported on different ARM instruction sets but
generally the kernel just uses mcr as it is supported in all ARM instruction
sets.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add all HW-support options from tegra_defconfig that are missing from
multi_v7_defconfig.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- un-use slot-node and deprecate the supports-highspped
for dw-mmc
- remove old USB2 PHY node for exynos5250
- exynos4412-odroid-common
enable PMIC interrupt and i2c improvements
- exynos5250-snow
fold exynos5250-cros-common
update display related nodes
- Peach Pit and Pi
improve power scheme, add support max77802 PMIC,
add hdmi regulators add thermistor, ISL29018 sensor,
set i2c clock at 400kHz, add support Atmel touchpad,
update display related nodes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=aaca
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
Pull "Samsung DT update for 3.18" from Kukjin Kim:
- un-use slot-node and deprecate the supports-highspped
for dw-mmc
- remove old USB2 PHY node for exynos5250
- exynos4412-odroid-common
enable PMIC interrupt and i2c improvements
- exynos5250-snow
fold exynos5250-cros-common
update display related nodes
- Peach Pit and Pi
improve power scheme, add support max77802 PMIC,
add hdmi regulators add thermistor, ISL29018 sensor,
set i2c clock at 400kHz, add support Atmel touchpad,
update display related nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: remove old USB2 PHY node for exynos5250
ARM: dts: remove old USB2 PHY node hook for exynos5250-arndale
ARM: dts: update display related nodes for exynos5800-peach-pi
ARM: dts: update display related nodes for exynos5420-peach-pit
ARM: dts: update display related nodes for exynos5250-snow
ARM: dts: Add support Atmel touchpad for exynos5800-peach-pi
ARM: dts: Add support Atmel touchpad for exynos5420-peach-pit
ARM: dts: Set i2c7 clock at 400kHz for exynos based Peach boards
ARM: dts: Add ISL29018 sensor for exynos based Peach boards
ARM: dts: Add thermistor dts fragment used by exynos based Peach boards
ARM: dts: add hdmi regulators for exynos5420-peach-pit
ARM: dts: add hdmi regulators for exynos5800-peach-pi
ARM: dts: Add support max77802 PMIC for exynos based Peach boards
ARM: dts: Improve Peach Pit and Pi power scheme
ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
ARM: dts: Fold exynos5250-cros-common into exynos5250-snow
ARM: dts: Fix MMC pinctrl for exynos5250-snow
ARM: dts: ODROID i2c improvements for exynos4412-odroid-common
ARM: dts: Enable PMIC interrupts for exynos4412-odroid-common
Add dt for rk3288 i2s controller, since i2s clock pins and data pins
default to be GPIO, this patch also add pinctrl to mux them.
Tested on RK3288 board.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- introduction of the new SAMA5D4 SoC and associated Evaluation Kit
- low level soc detection and early printk code
- taking advantage of this, documentation of all AT91 SoC DT strings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUIB6OAAoJEAf03oE53VmQL+IIALNg2XPS49u2Y6VMjL3srFLt
7CUdNoGB7GJKoGrIXPSyAhJLkRlWREgRsEk/RSYqfBpyBZV4PIx9R6dIz1L+VxGU
9neXLkZGrYNzN8qJPz82+ARuCXdCF13N8ClVfXkNDhwbDnlbZgTkh4hNV118mKLt
+PF0d3w354ujieUD7D0pOcdRlny487qMNjtc/0U4P+H2sp2EtL0PpFHicn79InPT
V36PpFtUMEgbw2wQPNtlFkjQWstyZ7WJJGUbIX/2P3PASCwKsgrbmkvDvmfp5tUT
FdclJwJnxgcpni2fDvbz8Vq04i3hixl2Olm8tAvIXOI/hdVcurvZSfweJ5BrfDk=
=fMfO
-----END PGP SIGNATURE-----
Merge tag 'at91-soc2' of git://github.com/at91linux/linux-at91 into next/soc
Pull "Second SoC batch for 3.18" from Nicolas Ferre:
- introduction of the new SAMA5D4 SoC and associated Evaluation Kit
- low level soc detection and early printk code
- taking advantage of this, documentation of all AT91 SoC DT strings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-soc2' of git://github.com/at91linux/linux-at91:
ARM: at91: document Atmel SMART compatibles
ARM: at91: add sama5d4 support to sama5_defconfig
ARM: at91: dt: add device tree file for SAMA5D4ek board
ARM: at91: dt: add device tree file for SAMA5D4 SoC
ARM: at91: SAMA5D4 SoC detection code and low level routines
ARM: at91: introduce basic SAMA5D4 support
clk: at91: add a driver for the h32mx clock
The soc2 branch is based on this cleanup:
* at91/soc:
ARM: at91: Remove the support for the RSI EWS board
ARM: at91: remove board file for Acme Systems Fox G20
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- removal of 2 board C files in mach-at91
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUHFcbAAoJEAf03oE53VmQ1IEH/3Bzs3OhF7YTEM0XX10l64lK
STAVbYurugb6IbvYZ2Q7LY1YOeilaNdZeMmmyivhiIOU5duQURyoSJm1+5VSKF6p
XYZJcJSNdmoqiSTFmmok8sO8CC0Y2hi+W/SgFO/PHnj15PLECX/KddlfMTjRECvr
QvbgruHiX1AX5z5nWyjPFDrxrk33rDvjQfVEqMwjNhcV4hGhV6vU8CIRUrqGftH1
8yGxpGkYYBGlBu6qd9MmgIV0sPmkpMrDaWoEnyphxF8bmZNnkKO0JnxcQCaeHL6v
tQV8EFxQqm5xQU4vNAWnEiDFj/hrZN3fC5tzrOSj8OoEoPIyQW+XKI64Y3UrZXs=
=Q1d3
-----END PGP SIGNATURE-----
Merge tag 'at91-soc' of git://github.com/at91linux/linux-at91 into next/cleanup
Pull "First AT91 SoC batch for 3.18" from Nicolas Ferre:
- removal of 2 board C files in mach-at91
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-soc' of git://github.com/at91linux/linux-at91:
ARM: at91: Remove the support for the RSI EWS board
ARM: at91: remove board file for Acme Systems Fox G20
- Remove unused pieces of the legacy DMA API as we're moving to
dmaengine API
- Search and replace to standardize on pr_warn instead of pr_warning
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUGzmvAAoJEBvUPslcq6Vz53kQAOAS6Rxp03mmjflegqkVzech
JUPBfGQHVwcpbYQU53+ZCt2Bfg0iaD6xL2BtBfS8tsaePDwqT6kVFrDBqWuIiT6S
Taq2NUzqAhdgva74a6VAh0VSpPK4ui3cdXRoXvMfZRvOtR8bbfAprAWYyWipy2RM
4y07a9dcd1SalcWDJttfXxBV7ImqXPf1e6dRtxYRBBshoNJ46/nk8nS9HblaoJbJ
L3FdmOw7x5jG1nSO4dmhsGzg0PmfjKJwe+rGYPVLuEPil6Sc0VDJxGF8ZyAyK+/K
r8ZvIdbWLiJ6ga/ehMNaZaz6sOsSPRAWWSTOOGUlJvBUiOgHH8P+/Y/3fCkcjTlT
Rg15sij0aBVQJNGNEif9xd19f1tnlthSnjIt593YnqElCN50lnNDBt+bVICTlszd
sXbPZtO8vZ0PHEDshBpWvjyPKyN1CrRTVHtGJXZr/zNWoK2Y1NvsdOYR36AlQugW
WhA5hklyJnRpdbiU84fBon9pbowAOIMcLctBqpK5RyqyC+vVgopcaoMWl9F1XW/r
cAcGVm/zAWfWm01XeuJu1R6DOdLxUvi0Sn7UrXcsPwEYR2pp0NdQQUmNEX3Ko9cW
rIO7emEqQvUdY/K+wa5HzhVMHk5VuBIUb8nT30KjOCEGOB7QhEb/6ly6D0pxLFJ0
RtC70hvqxGWawiNpGadr
=ZNTi
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
Pull "Clean-up for omaps for v3.18 merge window" from Tony Lindgren:
- Remove unused pieces of the legacy DMA API as we're moving to
dmaengine API
- Search and replace to standardize on pr_warn instead of pr_warning
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'cleanup-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm: mach-omap2: Convert pr_warning to pr_warn
ARM: OMAP: Remove unused pieces of legacy DMA API
start using the SRAM driver for some omaps, and update the
defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iau9
-----END PGP SIGNATURE-----
Merge tag 'soc-part2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "part 2 of omap SoC changes" from Tony Lindgren:
Few hwmod changes to support upcoming 8250 driver with DMA,
start using the SRAM driver for some omaps, and update the
defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'soc-part2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4+: Remove static iotable mappings for SRAM
ARM: OMAP4+: Move SRAM data to DT
ARM: AM335x: Get rid of unused sram init function
ARM: omap2plus_defconfig: Enable some display features
ARM: omap2plus_defconfig: Enable battery and reset drivers
ARM: omap2plus_defconfig: Add support for distros with systemd
ARM: omap2plus_defconfig: Add cpufreq to defconfig
ARM: omap2plus_defconfig: Shrink with savedefconfig
ARM: OMAP3: Use manual idle for UARTs because of DMA errata
ARM: OMAP2+: Add hwmod flag for HWMOD_RECONFIG_IO_CHAIN
move it to drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cYAz
-----END PGP SIGNATURE-----
Merge tag 'intc-part2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
Merge "part 2 of omap intc changes" from Tony Lindgren:
Second part of omap intc interrupt controller changes to
move it to drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'intc-part2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
irqchip: omap-intc: remove unnecessary comments
irqchip: omap-intc: correct maximum number or MIR registers
irqchip: omap-intc: enable TURBO idle mode
irqchip: omap-intc: enable IP protection
irqchip: omap-intc: remove unnecesary of_address_to_resource() call
irqchip: omap-intc: comment style cleanup
irqchip: omap-intc: minor improvement to omap_irq_pending()
arm: omap: irq: move irq.c to drivers/irqchip/
irqchip: add irq-omap-intc.h header
arm: omap2: n8x0: move i2c devices to DT
... for V2M-P1 motherboard CLCD (limited to 640x480 16bpp and using
dedicated video RAM bank) and for V2P-CA9 (up to 1024x768 16bpp).
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge "ARM: BCM: Broadcom BCM63138 support" from Florian Fainelli:
This patchset adds very minimal support for the BCM63138 SoC which is
a xDSL SoC using a dual Cortex A9 CPU complex.
* tag 'bcm63138-v4' of http://github.com/brcm/linux:
MAINTAINERS: add entry for the Broadcom BCM63xx ARM SoCs
ARM: BCM63XX: add BCM963138DVT Reference platform DTS
ARM: BCM63XX: add BCM63138 minimal Device Tree
ARM: BCM63XX: add low-level UART debug support
ARM: BCM63XX: add basic support for the Broadcom BCM63138 DSL SoC
Conflicts:
arch/arm/Kconfig.debug
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Max_Read_Request_Size is 3 bits wide, not 2 bits.
Also fix the message.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Without this patch, each root port and the device connected directly to it seem
to be located on a shared (virtual) bus #0. It creates problems with enabling
devices (the PCI code doesn't know that the root bridge must be enabled in order
to access other devices).
The PCIe topology shown by lspci doesn't reflect reality, e.g.:
0000:00:00.0 PCI bridge: Cavium Networks Device 3400
0000:00:01.0 PCI bridge: Texas Instruments XIO2001 PCI Express-to-PCI Bridge
0000:02:...
0001:00:00.0 PCI bridge: Cavium Networks Device 3400 (for the second lane/bus)
-+-[0001:00]---00.0-[01]--
\-[0000:00]-+-00.0-[01]--
| ^^^^ root bridge
\-01.0-[02]----...
^^^^ first external device
With this patch, the first external PCIe device is connected to bus #1
(behind the root bridge).
-+-[0001:00]---00.0-[01]--
\-[0000:00]---00.0-[01-02]----------00.0-[02]----...
^^^^ root bridge ^^^^ first external device
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
UARTs on CNS3xxx are 8250-compatible, not AMBA.
The base address for UART0 is 0x78000000 (physical)
and 0xfb002000 (virtual).
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It broke when host was moved into a separate module, in 47a1685 ("usb:
dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory"),
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nothing major, just a few drivers additions and misc options
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+yQb
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Pull "Allwinner defconfig additions for 3.18" from Maxime Ripard
Nothing major, just a few drivers additions and misc options
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'sunxi-defconfig-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi_defconfig: add NLS_CODEPAGE_437 and NLS_ISO8859_1
ARM: sunxi: Add A31 RTC driver to multi_v7_defconfig
ARM: sunxi: Add A31 RTC driver to sunxi_defconfig
* r8a7740: Fix documentation error coppied from elsewhere
* r8a7794: Reserve memory for CMA in a manner consistent to
other R-Car Gen2 SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wfDI
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc5-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Fifth Round of Renesas ARM Based SoC Soc Updates for v3.18" from Simon Horman:
* r8a7740: Fix documentation error copied from elsewhere
* r8a7794: Reserve memory for CMA in a manner consistent to
other R-Car Gen2 SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-soc5-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7740 legacy: Fix copied bug in comment
ARM: shmobile: r8a7794: Reserve memory as other R-Car Gen2 SoCs
Support is enabled for Venice2's touchpad, and Tegra124's AHCI (SATA)
controller, as used on Jetson TK1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cO5m
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.18-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/defconfig
Pull "ARM: tegra: tegra_defconfig changes for 3.18" from Stephen Warren:
Support is enabled for Venice2's touchpad, and Tegra124's AHCI (SATA)
controller, as used on Jetson TK1.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'tegra-for-3.18-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: enable Atmel touchpad in defconfig
ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig
Contains an update to 3.17-rc2.
The main highlights are:
* SATA and PCIe support added to Tegra124, and enabled on Jetson TK1.
* Touchpad enabled on Venice2 (although the driver still has a few issues
to be worked out).
* NVIDIA reference boards rely on the bootloader to program the pinmux.
* Support added for the Acer Chromebook 13 (CB5).
* DT nodes added for the Tegra flow controller HW module. This will
help reduce use of iomap.h in a future code cleanup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=X2mr
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.18-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt
Pull "ARM: tegra: device tree changes for 3.18" from Stephen Warren:
The main highlights are:
* SATA and PCIe support added to Tegra124, and enabled on Jetson TK1.
* Touchpad enabled on Venice2 (although the driver still has a few issues
to be worked out).
* NVIDIA reference boards rely on the bootloader to program the pinmux.
* Support added for the Acer Chromebook 13 (CB5).
* DT nodes added for the Tegra flow controller HW module. This will
help reduce use of iomap.h in a future code cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'tegra-for-3.18-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: enable PCIe in Jetson TK1 DT
ARM: tegra: add PCIe to Tegra124 DT
ARM: tegra: rely on bootloader pinmux programming on Tegra124
ARM: tegra: add Acer Chromebook 13 device tree
ARM: tegra: Move pwm and dpaux labels to tegra124.dtsi
ARM: tegra: add touchpad to Venice2 DT
ARM: tegra: Add device tree nodes for flow controller
ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables
ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
ARM: tegra: Add SATA controller to Tegra124 device tree
the primary change here gets its address information from DT rather than
iomap.h. This removes one more user of iomap.h, and will help allow the
code to move to a location that can be shared between arch/arm and
arch/arm64.
An unused header file was also removed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BeSe
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.18-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc
Pull "ARM: tegra: core SoC code changes for 3.18" from Stephen Warren:
the primary change here gets its address information from DT rather than
iomap.h. This removes one more user of iomap.h, and will help allow the
code to move to a location that can be shared between arch/arm and
arch/arm64.
An unused header file was also removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'tegra-for-3.18-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: remove unused tegra_emc.h
ARM: tegra: Initialize flow controller from DT
of: Add NVIDIA Tegra flow controller bindings
- specify DMA channels for USART on sama5d3 and choose peripherals
that will use them on the EK boards
- SSC update for audio on at91sam9rl and at91sam9g20
- addition of the NFC clock and new pinctrl compatible string
to use enhancements that will land in drivers during this release
- several new nodes and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUGxCuAAoJEAf03oE53VmQDRYIAIMkFVY9ZfhVDD8BEwOXm5FL
ZECxGAKxzoaN+P5DbDOqCWmW9juxLhJjxPrwmpoYi7ShG5exYGl2jUZiF6fRq/fH
JJgSNKuNCLJbwlVWBo150v+2gRTyew3Pt8ijZWkzK06YPjW8Oxy3c4MjZ+wF2838
k9jv/8dMT52nEr24x9Py0CPYR1Dh+EzFfoIXyJ4XM66CPIFfn4Ds4tz2gRhj7t2Z
8NyGJ/F+fP3HB1ds3nauaS77XkulN5R/odIQchUzu4IO+mEQY9pbeVvyXWv97Y5T
gL9AE5hcSwnE2xrXJGt2l2HV90FZMFU108WIKucca+RPOlfaB25fpMvMm8gAxDA=
=fE/3
-----END PGP SIGNATURE-----
Merge tag 'at91-dt3' of git://github.com/at91linux/linux-at91 into next/dt
Pull "More AT91 DT material for 3.18" from Nicolas Ferre:
- specify DMA channels for USART on sama5d3 and choose peripherals
that will use them on the EK boards
- SSC update for audio on at91sam9rl and at91sam9g20
- addition of the NFC clock and new pinctrl compatible string
to use enhancements that will land in drivers during this release
- several new nodes and fixes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-dt3' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: at91sam9m10g45ek add rtc node
ARM: at91/dt: sama5d3: use new pinctrl compatible string
ARM: at91/dt: sama5d3: add the nfc clock
ARM: at91/dt: declare sckc node on at91sam9g45
ARM: at91/dt: Fix typo regarding can0_clk
ARM: at91/dt: at91sam9g20: switch ssc compatible string
ARM: at91/dt: at91sam9rl: switch ssc compatible string
ARM: at91: sama5d3xek: reserve dma channel for audio
ARM: at91: sama5d3: add usart dma configurations
This patch adds the basic machine file for the MesonX SoCs. Only Meson6
is populated.
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex
A9 and an ARM Mali-400 GPU.
This patch adds two basic DTSI for the preliminary support of Meson and
Meson6 SoCs. Another DTS is also added for supporting the atv1200 board,
produced by Geniatech inc.
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch updates the multi_v7_defconfig with the CONFIG_* needed by
the just added Meson anch. It also adds a new defconfig specifically for
the Meson SoCs.
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the UART definitions needed to support earlyprintk for MesonX SoCs
on UARTAO.
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn
instructions (where the optional alignment hint is given but incorrect)
as LDR/STR, leading to register corruption. Detect these and correctly
treat them as unhandled, so that userspace gets the fault it expects.
Reported-by: Simon Hosie <simon.hosie@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
SCTLR.HA (hardware access flag) is deprecated and not actually
implemented by any CPUs. Furthermore, it can confuse cr_alignment checks
where the whole value of SCTLR is compared against the value sitting in
the hardware, since the bit is actually RAZ/WI and will not match the
saved cr_alignment value.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Enable USB gadget support without support for any specific gadgets to
more easily catch cases where a devices dts doesn't specify the usb
controllers dr_mode while it should.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
With the introduction of DT based idle states, CPUidle drivers for ARM
can now initialize idle states data through properties in the device tree.
This patch adds code to the big.LITTLE CPUidle driver to dynamically
initialize idle states data through the updated device tree source file.
Cc: Chander Kashyap <k.chander@samsung.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
- Device tree support for i.MX ADS and Armadeus APF9328 boards
- Enable thermal sensor support for i.MX6SL
- Add LCD support for i.MX6SL EVK board
- Fix display duplicate name for a bunch of board dts files
- Configure imx6qdl-sabresd board pins locally to remove the dependency
on bootloader
- A set of imx28-tx28 board dts updates from Lothar
- Add pci config space as platform resource
- Enable devices RTC, I2C and HDMI for nitrogen6x board
- Split HummingBoard DT to support s/dl and d/q
- mSATA and IR input support for HummingBoard
- Add SSI baud clock for i.MX6 device trees
- Add USB support for vf610-colibri and vf610-twr boards
- A set of cleanup and updates on Gateworks boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUF7RZAAoJEFBXWFqHsHzOFUgH/i/9xApJoCS4X5HcnS3p0uYO
XLu9qkl4BgvlWTehOQlBBn4Nitv9A2b23BFkZ73+FMiM43NgEXTpitt1oTdO57tA
lmOrtlIeKFGjLLwqBu0WL01VKaH7O6B4Qe09xv/Zx3wz4yYC9l/T23yQ/Z/UFJQT
afqyzMrfzKd0WyE4RsuL/Ir94K9Y0FzWV1u8mhupYlqDdMop27XZRMD2CHs3W9PI
v3c7hjXT4RtLdmvHWUSVg5xwBE7ntYysv7KlEsBebSQ6dkl5vIWDO37yuGQjUAB5
v/Ro63UwM/wPqzq50VESG5c4/OWqz+xLN0r9z+csapDcezO86dCceeek0+qyjvY=
=svCp
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Merge "ARM: imx: device tree changes for 3.18" from Shawn Guo:
The i.MX device tree changes for 3.18:
- Device tree support for i.MX ADS and Armadeus APF9328 boards
- Enable thermal sensor support for i.MX6SL
- Add LCD support for i.MX6SL EVK board
- Fix display duplicate name for a bunch of board dts files
- Configure imx6qdl-sabresd board pins locally to remove the dependency
on bootloader
- A set of imx28-tx28 board dts updates from Lothar
- Add pci config space as platform resource
- Enable devices RTC, I2C and HDMI for nitrogen6x board
- Split HummingBoard DT to support s/dl and d/q
- mSATA and IR input support for HummingBoard
- Add SSI baud clock for i.MX6 device trees
- Add USB support for vf610-colibri and vf610-twr boards
- A set of cleanup and updates on Gateworks boards
* tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (86 commits)
ARM: dts: imx6: make gpt per clock can be from OSC
ARM: dts: imx: ventana: add canbus support for GW52xx
ARM: dts: imx: ventana: cleanup pinctrl groups
ARM: dts: imx: ventana: configure padconf for all pins
ARM: dts: imx: ventana: use gpio constants
ARM: dts: imx: ventana: remove unused aliases
ARM: dts: imx: ventana: remove unsupported dt nodes
ARM: dts: imx28-tx28: add alias for CAN XCVR regulator
ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs
ARM: dts: imx28-tx28: use GPIO flags
ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev
ARM: dts: imx6sl: add baud clock and clock-names for ssi
ARM: dts: imx6qdl: add baud clock and clock-names for ssi
ARM: dts: imx6qdl-sabresd: Configure the pins locally
ARM: dts: imx28-m28evk: Fix display duplicate name warning
ARM: dts: imx28-tx28: Fix display duplicate name warning
ARM: dts: imx28-m28cu: Fix display duplicate name warning
ARM: dts: imx28-cfa100: Fix display duplicate name warning
ARM: dts: imx28-apf28dev: Fix display duplicate name warning
ARM: dts: imx28-apx4devkit: Fix display duplicate name warning
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add initial devicetree support for i.MX1
- Support GPT per clock source from OSC for i.MX6
- A couple of parent selection corrections for i.MX6SL clock driver
- Support more chip revision for i.MX6
- Convert pr_warning to pr_warn
- Add exclusive gate clock support
- Add BYPASS support for i.MX6 PLL clocks
- Update i.MX6 clock tree for audio use case
- A couple of VF610 clock driver updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUF672AAoJEFBXWFqHsHzOTXQIAJ0ZTXtzQsJ3gLFU+CwRMm2F
hIzFDNOsRkEYpJaa6AkweBmLyUUdePn9rUVRzCi4P9Ux5uCSU6sd3CPHOykOCrV4
xGXk+hL47IpPNGP1tZ4NU7bVBz4BvrIkLRXBxlO+YZ2ZKf+k8Ma166c3iwYFqpDD
8Fd7SQrKleZiXXDgz6y8SRCsOre3HmmjeJBBHhKuegSRscyh2cYfduBsmr6xTojR
Jzcega1pprb1ojxflMVLHcGRquyYVHaoH65mD4leDhSWa93MZFCOAFCl27qsZNs5
gTlaayqq8ws8aFOXi9OmONSjL+ZBMkf0Jk/QGOo5cLCUKYYv10KK2LXFeBOpg8A=
=yLWI
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
Merge "ARM: imx: SoC updates for 3.18" from Shawn Guo:
The i.MX SoC updates for 3.18:
- Add initial devicetree support for i.MX1
- Support GPT per clock source from OSC for i.MX6
- A couple of parent selection corrections for i.MX6SL clock driver
- Support more chip revision for i.MX6
- Convert pr_warning to pr_warn
- Add exclusive gate clock support
- Add BYPASS support for i.MX6 PLL clocks
- Update i.MX6 clock tree for audio use case
- A couple of VF610 clock driver updates
* tag 'imx-soc-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
ARM: imx_v6_v7_defconfig updates
ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIM
arm: mach-imx: Convert pr_warning to pr_warn
ARM: imx: source gpt per clk from OSC for system timer
ARM: imx: add gpt_3m clk for i.mx6qdl
ARM: imx: fix register offset of pll7_usb_host gate clock
ARM: clk-imx6sl: refine clock tree for SSI
ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver
ARM: imx6sx: add BYPASS support for PLL clocks
ARM: imx6sl: add BYPASS support for PLL clocks
ARM: imx6q: add BYPASS support for PLL clocks
ARM: imx: add an exclusive gate clock type
ARM: clk-imx6q: refine clock tree for SSI
ARM: clk-imx6q: refine clock tree for ASRC
ARM: clk-imx6sl: correct the pxp and epdc axi clock selections
ARM: clk-imx6q: refine clock tree for ESAI
ARM: clk-imx6sl: Select appropriate parents for LCDIF clocks
ARM: clk-imx6sl: Remove csi_lcdif_sels[]
ARM: imx: clk-vf610: Add USBPHY clocks
ARM: imx: add cpufreq support for i.mx6sx
...
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable r8a7794 SoC in shmobile_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JqYw
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig4-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Merge "Fourth Round of Renesas ARM Based SoC Defconfig Updates for v3.18" from Simon Horman:
Fourth Round of Renesas ARM Based SoC Defconfig Updates for v3.18
* Enable r8a7794 SoC in shmobile_defconfig
* tag 'renesas-defconfig4-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable r8a7794 SoC in shmobile_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable Mediatek platform support for multi_v7_defconfig.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch changes the compatible string of the GIC to the
new "arm,cortex-a7-gic" which does reflect the actual hardware.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the missing 'compatible' property to device tree root node of
- mt6589-aquaris5.dts
and document the new values.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add boot argument for earlyprintk to the aquaris5 device tree file.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This changes the unit address of the gic node to it's first register area.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This allows the "make dtbs" to build the aquaris5 dtb for the Mediatek
SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Armada 375
- Add RTC support
- Armada 370
- Add proper pinmuxing
- Add SSCG
- Add gpio-fan
- Add LED support
- change Intersil vendor prefix to isil
- use improved Armada SPI compatible string
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=rLx3
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu into next/dt
Merge "ARM: mvebu: DT changes for v3.18" from Jason Cooper:
mvebu DT changes for v3.18
- Armada 375
- Add RTC support
- Armada 370
- Add proper pinmuxing
- Add SSCG
- Add gpio-fan
- Add LED support
- change Intersil vendor prefix to isil
- use improved Armada SPI compatible string
* tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: add user LED support of Armada 370 RD
ARM: mvebu: add gpio fan support to Armada 370 RD
ARM: mvebu: Change vendor prefix for Intersil Corporation to isil
ARM: mvebu: use improved armada spi device tree compatible name
ARM: mvebu: add SSCG to Armada 370 Device Tree
ARM: mvebu: Add proper pin muxing on Armada 370 RD board
ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 104
ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102
ARM: mvebu: Add proper pin muxing on the Armada 370 DB board
ARM: mvebu: Add proper pin muxing on Globalscale Mirabox board
ARM: mvebu: Add network pin mux configuration for the Armada 370 SoC
ARM: mvebu: Add RTC support for Armada 375
Signed-off-by: Olof Johansson <olof@lixom.net>
When compiling with "ARCH=arm" and "allmodconfig",
with commit: 9cdc99919a [2/7] ARM: hisi: enable MCPM implementation
we will get:
/tmp/cc6DjYjT.s: Assembler messages:
/tmp/cc6DjYjT.s:63: Error: selected processor does not support ARM mode `ubfx r1,r0,#8,#8'
/tmp/cc6DjYjT.s:761: Error: selected processor does not support ARM mode `isb '
/tmp/cc6DjYjT.s:762: Error: selected processor does not support ARM mode `dsb '
/tmp/cc6DjYjT.s:769: Error: selected processor does not support ARM mode `isb '
/tmp/cc6DjYjT.s:775: Error: selected processor does not support ARM mode `isb '
/tmp/cc6DjYjT.s:776: Error: selected processor does not support ARM mode `dsb '
/tmp/cc6DjYjT.s:795: Error: selected processor does not support ARM mode `isb '
/tmp/cc6DjYjT.s:801: Error: selected processor does not support ARM mode `isb '
/tmp/cc6DjYjT.s:802: Error: selected processor does not support ARM mode `dsb '
Fix platmcpm compilation when ARMv6 is selected.
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
When introducing support for sama5d3, the write to PMC_PCDR register has
been accidentally removed.
Reported-by: Nathalie Cyrille <nathalie.cyrille@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: <stable@vger.kernel.org> # 3.10.x and later
As discovered on a custom board similar to at91sam9263ek and basing
its devicetree on that one apparently the pin muxing doesn't get
set up properly. This was discovered since the custom boards u-boot
does funky stuff with the pin muxing and leaved it set to SPI
which made the MMC driver not work under Linux.
The fix is simply to define the given configuration as the default.
This probably worked by pure luck before, but it's better to
make the muxing explicitly set.
Signed-off-by: Andreas Henriksson <andreas.henriksson@endian.se>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: <stable@vger.kernel.org> # 3.11+
This will be used to let the guest run while the APIC access page is
not pinned. Because subsequent patches will fill in the function
for x86, place the (still empty) x86 implementation in the x86.c file
instead of adding an inline function in kvm_host.h.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
1. We were calling clear_flush_young_notify in unmap_one, but we are
within an mmu notifier invalidate range scope. The spte exists no more
(due to range_start) and the accessed bit info has already been
propagated (due to kvm_pfn_set_accessed). Simply call
clear_flush_young.
2. We clear_flush_young on a primary MMU PMD, but this may be mapped
as a collection of PTEs by the secondary MMU (e.g. during log-dirty).
This required expanding the interface of the clear_flush_young mmu
notifier, so a lot of code has been trivially touched.
3. In the absence of shadow_accessed_mask (e.g. EPT A bit), we emulate
the access bit by blowing the spte. This requires proper synchronizing
with MMU notifier consumers, like every other removal of spte's does.
Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Added APQ8084 dt support for clocks, serial, pinctrl, and IFC6540 board
* Added IPQ8064 dt support for basic SoC and AP148 board
* Added APQ8064 dt support for pinctrl, reset, SDHC, and multimedia clocks
* Added PMIC 8058 dt support on MSM8660, enables PMIC based power key,
keypad, rtc, and vibrator
* Added PMIC 8921 dt support on MSM8960, enables PMIC based power key,
keypad, and rtc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: GPGTools - https://gpgtools.org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=L0k9
-----END PGP SIGNATURE-----
Merge tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt
Merge "qcom DT changes for v3.18" from Kumar Gala:
Qualcomm ARM Based Device Tree Updates for v3.18
* Added APQ8084 dt support for clocks, serial, pinctrl, and IFC6540 board
* Added IPQ8064 dt support for basic SoC and AP148 board
* Added APQ8064 dt support for pinctrl, reset, SDHC, and multimedia clocks
* Added PMIC 8058 dt support on MSM8660, enables PMIC based power key,
keypad, rtc, and vibrator
* Added PMIC 8921 dt support on MSM8960, enables PMIC based power key,
keypad, and rtc
* tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: DT: QCOM: apq8064: Add dma support for sdcc node
ARM: DT: apq8064: Add sdcc support via mcci driver.
ARM: dts: qcom: Add 8064 multimedia clock controller node
ARM: DT: APQ8064: Add node for ps_hold function in pinctrl
ARM: DT: APQ8064: Add pinctrl support
ARM: dts: qcom: Add TLMM DT node for APQ8084
ARM: dts: qcom: Add initial IFC6540 board device tree
ARM: dts: msm: Add 8058 PMIC to ssbi bus
ARM: dts: msm: Add 8921 PMIC to ssbi bus
ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees
ARM: dts: qcom: Add APQ8084 serial port DT node
ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node
Signed-off-by: Olof Johansson <olof@lixom.net>
HIP04 was added out of order, but so was the previous HISI debug uart
support as well. Minor reshuffling of order.
Signed-off-by: Olof Johansson <olof@lixom.net>
- Updates for gta04 to add gta04a3 model
- Add support for Tehnexion TAO3530 boards
- Regulator names for beaglebone
- Pinctrl related updates for omap5, dra7 and am437
- Model name fix for sbc-t54
- Enable mailbox for various omaps
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=i9cD
-----END PGP SIGNATURE-----
Merge tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Merge "omap dts changes for v3.18 merge window" from Tony Lindgren:
Changes for .dts files for omaps for v3.18 merge window:
- Updates for gta04 to add gta04a3 model
- Add support for Tehnexion TAO3530 boards
- Regulator names for beaglebone
- Pinctrl related updates for omap5, dra7 and am437
- Model name fix for sbc-t54
- Enable mailbox for various omaps
* tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (291 commits)
ARM: dts: OMAP2+: Add sub mailboxes device node information
ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable
ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART
ARM: dts: AM437x: switch to compatible pinctrl
ARM: dts: DRA7: switch to compatible pinctrl
ARM: dts: OMAP5: switch to compatible pinctrl
ARM: dts: am335x-boneblack: Add names for remaining regulators
ARM: dts: sbc-t54: fix model property
ARM: dts: omap5.dtsi: add DSS RFBI node
ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based)
ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
ARM: OMAP2+: tao3530: Add pdata-quirk for the mmc2 internal clock
ARM: OMAP2+: board-generic: add support for AM57xx family
ARM: dts: dra72-evm: Add tps65917 PMIC node
ARM: dts: dra72-evm: Enable I2C1 node
Linux 3.17-rc3
unicore32: Fix build error
vexpress/spc: fix a build warning on array bounds
spi: sh-msiof: Fix transmit-only DMA transfers
...
Signed-off-by: Olof Johansson <olof@lixom.net>
it ready to move to drivers/irqchip. Note that this series
does not yet move the interrupt code to drivers, that will
be posted separately as a follow-up series.
Note that this branch has a dependency to patches both
in fixes-v3.18-not-urgent and soc-for-v3.18 and is based on
a merge. Without doing the merge, off-idle would not work
properly for git bisect.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=M+BY
-----END PGP SIGNATURE-----
Merge tag 'intc-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
Merge "omap intc changes for v3.18 merge window" from Tony Lindgren:
Interrupt code related clean-up for omap2 and 3 to make
it ready to move to drivers/irqchip. Note that this series
does not yet move the interrupt code to drivers, that will
be posted separately as a follow-up series.
Note that this branch has a dependency to patches both
in fixes-v3.18-not-urgent and soc-for-v3.18 and is based on
a merge. Without doing the merge, off-idle would not work
properly for git bisect.
* tag 'intc-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (325 commits)
arm: omap: intc: switch over to linear irq domain
arm: omap: irq: get rid of ifdef hack
arm: omap: irq: introduce omap_nr_pending
arm: omap: irq: remove nr_irqs argument
arm: omap: irq: remove unnecessary header
arm: omap: irq: drop omap2_intc_handle_irq()
arm: omap: irq: drop omap3_intc_handle_irq()
arm: omap: irq: call set_handle_irq() from .init_irq
arm: omap: irq: move some more code around
arm: boot: dts: omap2/3/am33xx: drop ti,intc-size
arm: omap: irq: drop ti,intc-size support
arm: boot: dts: am33xx/omap3: fix intc compatible flag
arm: omap: irq: use compatible flag to figure out number of IRQ lines
arm: omap: irq: add specific compatibles for omap3 and am33xx devices
arm: omap: irq: drop .handle_irq and .init_irq fields
arm: omap: irq: use IRQCHIP_DECLARE macro
arm: omap: irq: call set_handle_irq() from intc_of_init
arm: omap: irq: make intc_of_init static
arm: omap: irq: reorganize code a little bit
arm: omap: irq: always define omap3 support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- PM changes to make the code easier to use on newer SoCs
- PM changes for newer SoCs suspend and resume and wake-up events
- Minor clean-up to remove dead Kconfig options
Note that these have a dependency to the fixes-v3.18-not-urgent
tag and is based on a commit in that series.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=LW8C
-----END PGP SIGNATURE-----
Merge tag 'soc-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
SoC related changes for omaps for v3.18 merge window:
- PM changes to make the code easier to use on newer SoCs
- PM changes for newer SoCs suspend and resume and wake-up events
- Minor clean-up to remove dead Kconfig options
Note that these have a dependency to the fixes-v3.18-not-urgent
tag and is based on a commit in that series.
* tag 'soc-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (514 commits)
ARM: OMAP5+: Reuse OMAP4 PM code for OMAP5 and DRA7
ARM: dts: OMAP3+: Add PRM interrupt
ARM: omap: Remove stray ARCH_HAS_OPP references
ARM: DRA7: Add hook in SoC initcalls to enable pm initialization
ARM: OMAP5: Add hook in SoC initcalls to enable pm initialization
ARM: OMAP5 / DRA7: Enable CPU RET on suspend
ARM: OMAP5 / DRA7: PM: Provide a dummy startup function for CPU hotplug
ARM: OMAP5 / DRA7: PM: Avoid all SAR saves
ARM: OMAP5 / DRA7: PM: Enable Mercury retention mode on CPUx powerdomains
ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default
ARM: OMAP5 / DRA7: PM: Set MPUSS-EMIF clock-domain static dependency
ARM: OMAP5 / DRA7: PM: Update CPU context register offset
ARM: AM437x: use pdata quirks for pinctrl information
ARM: DRA7: use pdata quirks for pinctrl information
ARM: OMAP5: use pdata quirks for pinctrl information
ARM: OMAP4+: PM: Use only valid low power state for CPU hotplug
ARM: OMAP4+: PM: use only valid low power state for suspend
ARM: OMAP4+: PM: Make logic state programmable
ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
ARM: OMAP2+: powerdomain: pwrdm_for_each_clkdm iterate only valid clkdms
...
for the -rc cycle:
- Fixes for .dts files to differentiate panda and beaglebone versions
- Powerdomain fixes from Nishant Menon mostly for newer omaps
- Fixes for __initconst and of_device_ids const usage
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RPuM
-----END PGP SIGNATURE-----
Merge tag 'fixes-v3.18-not-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
Merge "non-urgent omap fixes for v3.18 merge window" from Tony Lindgren:
Fixes for omaps that were not considered urgent enough
for the -rc cycle:
- Fixes for .dts files to differentiate panda and beaglebone versions
- Powerdomain fixes from Nishant Menon mostly for newer omaps
- Fixes for __initconst and of_device_ids const usage
* tag 'fixes-v3.18-not-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: make of_device_ids const
ARM: omap2: make arrays containing machine compatible strings const
ARM: OMAP4+: PM: Use only valid low power state for CPU hotplug
ARM: OMAP4+: PM: use only valid low power state for suspend
ARM: OMAP4+: PM: Make logic state programmable
ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
ARM: OMAP2+: powerdomain: pwrdm_for_each_clkdm iterate only valid clkdms
ARM: OMAP5: powerdomain data: fix powerdomain powerstate
ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate
ARM: dts: am335x-bone*: Fix model name and update compatibility information
ARM: dts: omap4-panda: Fix model and SoC family details
+ Linux 3.17-rc3
Signed-off-by: Olof Johansson <olof@lixom.net>
- move of the PIT (basic timer) from mach-at91 to its proper location:
drivers/clocksource
- big cleanup of this driver along the way
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUFw4gAAoJEAf03oE53VmQAdwH+gIVjFww5vGjvfZqcOofmjlA
hzELgv1Jem2/OSQRkKX9ekY0hArca7POij+V9Ubz0LHag8JzEXhORq7KThx6vXbY
iUtx5hXkyXded5h8WqDJT0y7YFpM57Hv6Dgp7gXJQnNULwhQnafds0ucKr0fZVZK
64Zhf6YDQnHYotEoiE2zi+yAl2BI9uoO2tP+kWPezNWLQ5v89FnWtt828N+5Be/B
gujSX1ZHDtsIshdfjqhlZtm1eGDztajm/OxdWheU4qELsZ5QaSYe3klaExV93Hp4
LCFzczu54/krauAlLn01x/Kyjpi8S8Hc4Qj6AQU8LpAvoy/SMBy9xo0SIlX1ZX4=
=Zxt2
-----END PGP SIGNATURE-----
Merge tag 'at91-drivers2' of git://github.com/at91linux/linux-at91 into next/drivers
Merge " Second drivers series for AT91/3.18" from Nicolas Ferre:
- move of the PIT (basic timer) from mach-at91 to its proper location:
drivers/clocksource
- big cleanup of this driver along the way
* tag 'at91-drivers2' of git://github.com/at91linux/linux-at91:
ARM: at91: PIT: Move the driver to drivers/clocksource
ARM: at91: Give the PIT irq as an argument of at91sam926x_pit_init
ARM: at91: Convert the boards to the init_time callback
ARM: at91: soc: Add init_time callback
ARM: at91: PIT: (Almost) remove the global variables
ARM: at91: PIT: use request_irq instead of setup_irq
ARM: at91: PIT: Use pr_fmt
ARM: at91: PIT: Use consistent exit path in probe
ARM: at91: dt: Remove init_time definitions
ARM: at91: PIT: Rework probe functions
ARM: at91: PIT: Use of_have_populated_dt instead of CONFIG_OF
ARM: at91: PIT: Use DIV_ROUND_CLOSEST to compute the cycles
ARM: at91: generic.h: Add include safe guards
ARM: at91: PIT: Follow the general coding rules
Signed-off-by: Olof Johansson <olof@lixom.net>
The Exynos System-on-Chips have ~7 distinctive I2C IO ports (exact
number depends on chip). However some integrated circuits on board, also
using I2C protocol for communication, can be connected to the SoC by
other GPIO. Enabling the I2C GPIO driver allows using such additional
integrated circuits.
An example of such chip using I2C and connected over GPIO to SoC is
Maxim 77693 MUIC on Trats2 board. The regulator driver of Maxim
77693 offers charger and safeout LDO (necessary for USB OTG).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Fix building of exynos_defconfig with disabled CONFIG_PM_SLEEP by
adding checking whether Exynos cpuidle support is enabled before
accessing exynos_enter_aftr.
The build error message:
arch/arm/mach-exynos/built-in.o:(.data+0x74): undefined reference to `exynos_enter_aftr'
make: *** [vmlinux] Error 1
This patch has been tested on Exynos4210 based Origen board.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Due to recently merged patches and previous merge conflicts, the Samsung
PM Debug functionality no longer can be enabled. This patch fixes
incorrect dependency of SAMSUNG_PM_DEBUG on an integer symbol and adds
missing header inclusion.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The group has the samsung,pin-pud property set to 4, which is not a
correct value. This patch fixes this by replacing it with 3, which is
the correct value for pull-up.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Many Exynos5 boards (e.g: Snow, Peach Pit and Pi) have
a SBS-compliant gas gauge battery. Enable to built it
so the needed support is available for these boards.
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
systemd needs control groups support to be enabled in the
kernel so let's enable it by default since is quite likely
that a user-space with systemd will be used.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Many Exynos based Chromebooks have an Atmel trackpad so enable
support for it by default will make easier for users.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Enabled MAX77802 pmic for exynos systems.
One config USB_ANNOUNCE_NEW_DEVICES to display device
information on connect.
Another config for I2C_CHARDEV to see i2c device nodes.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Will Deacon pointed out, that the currently used opcode for filling holes,
that is 0xe7ffffff, seems not robust enough ...
$ echo 0xffffffe7 | xxd -r > test.bin
$ arm-linux-gnueabihf-objdump -m arm -D -b binary test.bin
...
0: e7ffffff udf #65535 ; 0xffff
... while for Thumb, it ends up as ...
0: ffff e7ff vqshl.u64 q15, <illegal reg q15.5>, #63
... which is a bit fragile. The ARM specification defines some *permanently*
guaranteed undefined instruction (UDF) space, for example for ARM in ARMv7-AR,
section A5.4 and for Thumb in ARMv7-M, section A5.2.6.
Similarly, ptrace, kprobes, kgdb, bug and uprobes make use of such instruction
as well to trap. Given mentioned section from the specification, we can find
such a universe as (where 'x' denotes 'don't care'):
ARM: xxxx 0111 1111 xxxx xxxx xxxx 1111 xxxx
Thumb: 1101 1110 xxxx xxxx
We therefore should use a more robust opcode that fits both. Russell King
suggested that we can even reuse a single 32-bit word, that is, 0xe7fddef1
which will fault if executed in ARM *or* Thumb mode as done in f928d4f2a8
("ARM: poison the vectors page"). That will still hold our requirements:
$ echo 0xf1defde7 | xxd -r > test.bin
$ arm-unknown-linux-gnueabi-objdump -m arm -D -b binary test.bin
...
0: e7fddef1 udf #56801 ; 0xdde1
$ echo 0xf1defde7f1defde7f1defde7 | xxd -r > test.bin
$ arm-unknown-linux-gnueabi-objdump -marm -Mforce-thumb -D -b binary test.bin
...
0: def1 udf #241 ; 0xf1
2: e7fd b.n 0x0
4: def1 udf #241 ; 0xf1
6: e7fd b.n 0x4
8: def1 udf #241 ; 0xf1
a: e7fd b.n 0x8
So on ARM 0xe7fddef1 conforms to the above UDF pattern, and the low 16 bit
likewise correspond to UDF in Thumb case. The 0xe7fd part is an unconditional
branch back to the UDF instruction.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mircea Gherzan <mgherzan@gmail.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
arch/mips/net/bpf_jit.c
drivers/net/can/flexcan.c
Both the flexcan and MIPS bpf_jit conflicts were cases of simple
overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
too some time to narrow down. Although a bit intrusive, this would
be good to get into the -rc cycle as there are quite a few boards
out there with omap3 es2.1 and es3.0, and we have those in at least
three boot test systems too that show errors without this patch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3MaO
-----END PGP SIGNATURE-----
Merge tag 'fix-v3.17-io-chain-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Regression fix for early omap3 revisions for wake-up events that
too some time to narrow down. Although a bit intrusive, this would
be good to get into the -rc cycle as there are quite a few boards
out there with omap3 es2.1 and es3.0, and we have those in at least
three boot test systems too that show errors without this patch.
* tag 'fix-v3.17-io-chain-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP3: Fix I/O chain clock line assertion timed out error
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix for omap_l3_noc bus code
- Serial console fix for cm-t53
- NAND timings fix for dra7-evm
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NJhf
-----END PGP SIGNATURE-----
Merge tag 'fixes-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Few regression fixes for omaps for the -rc cycle:
- Fix for omap_l3_noc bus code
- Serial console fix for cm-t53
- NAND timings fix for dra7-evm
* tag 'fixes-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: omap_l3_noc: Fix connID for OMAP4
ARM: dts: cm-t54: fix serial console power supply.
ARM: dts: dra7-evm: Fix NAND GPMC timings
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=s3j+
-----END PGP SIGNATURE-----
Merge tag 'fixes-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes
Keystone Edision dts fix for -rc cycle. Fix the PCIE and USB nodes.
* tag 'fixes-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: keystone: dts: fix bindings for pcie and usb clock nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 63288b721a ("ARM: imx: fix shared gate clock") attempted to fix
an issue with particular enable/disable sequence from two shared gate
clocks. But unfortunately, while it partially fixed the issue, it also
did something wrong in .is_enabled() function hook. In case of shared
gate, the function shouldn't really query the hardware state via
share_count, because the function is trying to query the enabling state
of the clock in question, not the hardware state which is shared by
multiple clocks.
Fix the issue by returning the enable_count of the clock itself which is
maintained by clock core, in case it's a clock sharing hardware gate
with others. As the result, the initialization of share_count per
hardware state is not needed now. So remove it.
Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Fixes: 63288b721a ("ARM: imx: fix shared gate clock")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
PCIe configuration space should be passed through reg property, rather than
through ranges property. This patch does the correction for SPEAr13XX
SOCs.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
There are 5 chip selects per SPI0 and SPI2 and 3 per SPI1. SPI2 needs
to be pinned out to use and by default they are disabled. So keep the
state disabled to reflect default.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Add Keystone IRQ controller IP node which allows ARM
CorePac core to receive signals from DSP cores.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
This patch moves Exynos PM domain code to use the new generic PM domain
look-up framework introduced in previous patches, thus also allowing
the new code to be compiled with CONFIG_ARCH_EXYNOS.
This patch was originally submitted by Tomasz Figa when he was employed
by Samsung.
Link: http://marc.info/?l=linux-pm&m=139955336002083&w=2
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add sama5d4 to sama5_defconfig to build kernel booting on both sama5d3 and
samad4.
Note that earlyprintk can only be working for one or the other.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
On Rockchip RK3188 SoCs the platform driver emac_rockchip is used. This variant driver
enables this regulator when the device driver is loaded. The phy no longer needs
to be always on.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
SoC identification code, kernel uncompress and low level
debugging routines update.
On SAMA5D4, DBGU is at another address AT91_BASE_DBGU2 so another
round of detection is needed. We also had to differentiate with
SAMA5D3 SoC family and rename some variables.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
