No need for the parentheses around any function pointer.
Detected using checkpatch.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes all comparsions to NULL with !..., as reported by
checkpatch.pl.
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes all unnecessary parentheses found by checkpatch.pl.
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following naming convention issue in rtsx_transport.c,
as reported by checkpatch.pl:
CHECK: Avoid CamelCase: <Handle_Errors>
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following issues in rtsx_transport.c as reported by
checkpatch.pl:
CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Please don't use multiple blank lines
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following styling issue in rtsx_transport.c
as reported by checkpatch.pl:
CHECK: spaces preferred around that '-' (ctx:VxV)
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes all spaces after casts in rtsx_transport.c, as reported
by checkpatch.pl:
CHECK: No space is necessary after a cast
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the alignment issue reported by checkpatch.pl:
CHECK: Alignment should match open parenthesis
Add a unsigned char *sgbuffer in rtsx_stor_access_xfer_buffer to make the
following memcpy logic easier to read.
Add a struct scatterlist *sg in the use_sg branch of
rtsx_transfer_data_partial to make the parameters of the
rtsx_transfer_sglist_adma_partial call fit in 80 character lines after
aligning them to the open parenthesis.
Refactor memcpy logic in rtsx_stor_access_xfer_buf to make it more legible.
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes all multiline comments to conform to the coding style,
which states that multiline comments should start with "/*" and end
with "*/" on a separate line.
Also cleans up some comments to make them more clear and/or reflect what
the code is doing.
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This header only contains unused FIELD_*() macros and friends and may be
removed
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MHz() and roundedDiv macros are used only by ddk750_chip.c, so move
their definition there.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
<linux/kernel.h> already has 'abs', use it instead of custom absDiff
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use stratigh-forward of multi-bit register fields
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace complex definition of single-bit fields with BIT() macro for the
registers that are not currently referenced by the driver.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alignment should match open parenthesis. Checkpatch detected these
issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prefer using the BIT macro instead of (1 << X). Checkpatch detected this
issue.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the current
position. An asynchronous command in the "read" direction is terminated
automatically once it has stopped and information about the final
position and error has been reported back to the user. That is not
currently done for commands in the "write" direction. Change it to
terminate the command in the "write" direction automatically. If the
command stopped with an error, report an `EPIPE` error back to the user,
otherwise just report the final buffer position back to the user.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the current
position. If an asynchronous command in the "read" direction has
stopped normally, the command is terminated as soon as the position has
been advanced to the end of all available data. This is not currently
done if the command terminated with an error. Change it to allow the
command to be terminated even if it stopped with an error, but report an
`EPIPE` error to the user first. The `EPIPE` error will not be
reported until the "read" position reported back to the user has been
advanced to the end of all available data.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_read` member of `struct comedi_bufinfo`
specified the amount to advance the "read" position for an asynchronous
command in the "read" direction. If the command has already stopped
normally, and the "read" position has been advanced to the end of all
available data, the command is terminated by calling
`do_become_nonbusy()`. (That is not currently done if the command
stopped with an error.) Currently, the command is only terminated if
the user is trying to advance the "read" position by a non-zero amount.
Change it to allow the command to be terminated even if the user is not
trying to advance the "read" position. This is justifiable, as the only
time a command stops without error is when it has been set up to read a
finite amount of data.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer and/or get the current buffer position. If no asynchronous
command is active (started via the file object that issued this ioctl),
this information is meaningless. Change it to return an error
(`-EINVAL`) in this case. Prior to this change, if a command was
started via a different file object, the ioctl returned `-EACCES`, but
now it will return `-EINVAL`, which is consistent with the current
behavior of the "read" and "write" file operation handlers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_written` member of `struct
comedi_bufinfo` specifies the amount to advance the "write" position for
an asynchronous command in the "write" direction. On output, the member
indicates the amount the "write" position has actually been advanced.
Advancing the "write" position is current done even if the command has
stopped and cannot use any more written data. Change it to force the
amount successfully written to 0 in that case.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. For an asynchronous command in the "read" direction, if the
command has finished acquiring data normally, `do_become_nonbusy()` is
called to terminate the command. That resets the buffer position, and
currently, the position information returned back to the user is after
the buffer has been reset. It should be more useful to return the
buffer position before the reset, so move the call to
`do_become_nonbusy()` after the code that gets the updated buffer
position.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_read` member of `struct comedi_bufinfo`
specifies the amount to advance the "read" position for an asynchronous
command in the "read" direction, and the `bytes_written` member
specifies the amount to advance the "write" position for a command in
the "write" direction. The handler `do_bufinfo_ioctl()` may adjust
these by the amount the position is actually advanced before copying
them back to the user. Currently, it ignores the specified `bytes_read`
value for a command in the "write" direction, and ignores the specified
`bytes_written` for a command in the "read" direction, so the values
copied back to the user are unchanged. Change it to force the ignored
value to 0 before copying the values back to the user.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_read` member of `struct comedi_bufinfo`
specifies the amount to advance the "read" position for an asynchronous
command in the "read" direction, and the `bytes_written` member
specifies the amount to advance the "write" position for a command in
the "write" direction. The handler `do_bufinfo_ioctl()` may limit the
specified values according to amount of readable or writable space in
the buffer. On output, the `struct comedi_bufinfo` is filled in with
the updated position information, along with the adjusted `bytes_read`
and `bytes_written` members.
Advancing the buffer position occurs in two steps: first, some buffer
space is allocated, and second, it is freed, advancing the current
"read" or "write" position. Currently, `do_bufinfo_ioctl()` limits
`bytes_read` or `bytes_written` to the amount it could allocate in the
first step, but that is invisible and irrelevant to the ioctl user.
It's mostly irrelevant to the COMEDI internals as well, apart from
limiting how much can be freed in the second step. Change it to ignore
how much it managed to allocate in the first step and just use the
amount that was actually freed in the second step, which is the amount
the current buffer position was actually moved by this ioctl call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use if (status) in tests for successful urb status.
This replaces (status != 0) and (status == STATUS_SUCCESS).
(STATUS_SUCCESS is defined for NDIS status in this driver, but
was being misused)
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "translate_scan" function in rtl8712 uses a lot of stack, and
gets inlined into its single caller, r8711_wx_get_scan, which
in some configurations now blows the 1024 byte stack warning
limit:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'r8711_wx_get_scan':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1227:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This somewhat reduces the stack usage by moving the translate_scan
function out of line with the noinline_for_stack annotation.
It might be possible to modify translate_scan() a little further
to reduce the stack usage, but with this patch, we can build without
the warning, the the call chain to get here is rather predictable
(sys_ioctl->vfs_ioctl->sock_ioctl->dev_ioctl->wext_ioctl->
r8711_wx_get_scan).
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a driver hang caused by earlier suspend/resume cycles. By handling a
ENODEV error during suspend as a real error we eventually end up stopping
the whole driver.
Fix this by handling the ENODEV error (during suspend) essentially by
retrying.
Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare rtl871x_intf_resume() function static since it is defined and called
in this file only.
This fixes the following sparse warning:
warning: symbol 'rtl871x_intf_resume' was not declared. Should it be static?
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For platform_driver, we don't need to set .owner field as is set by
platform driver core. The semantic patch used here first checks whether
platform_driver struct was actually used in a call to set the .owner
field.
The coccinelle script that generated the patch can be found here:
http://www.spinics.net/lists/kernel/msg2029903.html
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes "blank lines aren't necessary after an open brace '{'"
checkpatch.pl warning in ethernet.c
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have only one NAPI poll running at a time, so virtual port rx counters
can be updated normally.
Update of rx_dropped can still race with the gathering of statistics,
but full accuracy is not required there.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make driver name to match the file name.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around operator to improve readability.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some if branches are missing braces as required by coding style.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@@
type T;
constant C;
expression e;
identifier i;
@@
T i
- = C
;
i = e;
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this file, the values returned by rtllib_priv() are unnecessarily cast
into a pointer type in some assignment statements. Remove the cast as it
is unneeded.
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With cmwq, use of dedicated workqueues can be replaced by system_wq.
Removed the dedicated workqueue and used system_wq instead.
Since the work items in the workqueues do not need to
be ordered, increase of concurrency by switching to system_wq should
not break anything.
All work items are sync canceled so it is guaranteed that no work is
running when driver is detached.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace long if-else block with switch-case to make it more readable and
compact.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
