If we see an already signaled fence that we want to await on, we skip
adding to the i915_sw_fence. However, we should pay attention to whether
there was an error on that fence and if so propagate it for our future
request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206160428.1503343-2-chris@chris-wilson.co.uk
Only do the locked compare of the existing fence->error if we actually
need to set an error. As we tend to call i915_sw_fence_set_error_once()
unconditionally, it saves on typing to put the common has-error check
into the inline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206160428.1503343-1-chris@chris-wilson.co.uk
We used to report the minimum possible frequency as both requested and
active while GPU was in sleep state. This was a consequence of sampling
the value from the "current frequency" field in our software tracking.
This was strictly speaking wrong, but given that until recently the
current frequency in sleeping state used to be equal to minimum, it did
not stand out sufficiently to be noticed as such.
After some recent changes have made the current frequency be reported
as last active before GPU went to sleep, meaning both requested and active
frequencies could end up being reported at their maximum values for the
duration of the GPU idle state, it became much more obvious that this does
not make sense.
To fix this we will now sample the frequency counters only when the GPU is
awake. As a consequence reported frequencies could be reported as below
the GPU reported minimum but that should be much less confusing that the
current situation.
v2:
* Split out early exit conditions for readability. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/675
Link: https://patchwork.freedesktop.org/patch/msgid/20191129105436.20100-1-tvrtko.ursulin@linux.intel.com
Before we signal the fence to indicate completion, ensure the pwrite
through the indirect GGTT is coherent (as best as we know) in memory.
Any listeners to the fence may start immediately and sample from the
backing store prior to the writes being posted, thus seeing stale data.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206105527.1130413-1-chris@chris-wilson.co.uk
Remove the vma we wish to destroy from the gt->closed_list to avoid
having two i915_vma_parked() try and free it.
Fixes: aa5e4453dc ("drm/i915/gem: Try to flush pending unbind events")
References: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205214159.829727-1-chris@chris-wilson.co.uk
It appears now that we have the ring TLB invalidation in place, we need
only update the page directory cachelines that we have altered. A great
reduction from rewriting the whole 2MiB ppgtt on every update.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205234059.1010030-1-chris@chris-wilson.co.uk
Get rid of the last remaining I915_READ in gt/ and make gt-land
the first I915_READ-free happy island.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205164422.727968-1-chris@chris-wilson.co.uk
Removing all vma from the VM is best effort -- we only remove all those
ready to be removed, so forgive and VMA that becomes pinned. While
forgiving those that become pinned, also take a second look for any that
became unpinned as we waited.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205113726.413351-1-chris@chris-wilson.co.uk
The use GEM context itself was removed in commit cd30a50317
("drm/i915/gem: Excise the per-batch whitelist from the context"), but
the locals were left in place as an oversight. Remove the parameters and
clean up.
References: cd30a50317 ("drm/i915/gem: Excise the per-batch whitelist from the context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204232616.94397-1-chris@chris-wilson.co.uk
Call i915_user_extensions() to validate the arg->extensions pointer, and
so return consistent error numbers for the future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204162803.3841140-1-chris@chris-wilson.co.uk
If we cannot handle a vma within the unbind loop, try to flush the
pending events (i915_vma_parked, i915_vm_release) and try again. This
avoids a round trip to userspace that is not guaranteed to make forward
progress, as the events we wait upon require being idle.
References: cb6c3d45f9 ("drm/i915/gem: Avoid parking the vma as we unbind")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204123556.3740002-1-chris@chris-wilson.co.uk
This is really just an alias of mmap_gtt. The 'mmap offset' nomenclature
comes from the value returned by this ioctl which is the offset into the
device fd which userpace uses with mmap(2).
mmap_gtt was our initial mmap_offset implementation, this extends
our CPU mmap support to allow additional fault handlers that depends on
the object's backing pages.
Note that we multiplex mmap_gtt and mmap_offset through the same ioctl,
and use the zero extending behaviour of drm to differentiate between
them, when we inspect the flags.
To support multiple mmap types on an object we need to support multiple
mmap_offsets for an object (each offset in the global device address
space corresponding to a unique instance of the object for a file + mmap
type). As we drop the simplified drm core idea of a single mmap_offset,
we need to provide replacement hooks for the dumb mmap interface as
well.
Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/1675
Testcase: igt/gem_mmap_offset
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204120032.3682839-1-chris@chris-wilson.co.uk
Assuming intel_crtc_arm_fifo_underrun() only gets called when
there's no pending plane updates we can utilize it on gen2 by
checking the active_planes bitmask so that we only re-enable
underrun reporting if some planes are active.
i915_fifo_underrun_reset_write() seems to have the necessary
hw_done/flip_done waits in place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127190556.1574-8-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Let's just inline intel_pre_disable_primary_noatomic() into
intel_plane_disable_noatomic(). The CxSR disable we can do
regardless of which plane we're disabling, and while at it we can
make the gen2 underrun w/a accurate by consulting the active_planes
bitmask.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127190556.1574-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We have the active_planes bitmask now so use it to properly
determine when some planes are visible for the gen2 underrun
workaround.
This let's us almost eliminate intel_post_enable_primary().
The manual underrun checks we can simply move into
intel_atomic_commit_tail() since they loop over all the pipes
already. No point in repeating the checks multiple times when
there are multiple pipes in the commit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127190556.1574-6-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Change the calling convention to just pass the state+crtc and
switch to intel_ types throughout.
We'll also do a quick s/if (old_primary_state)/if (new_primary_state)/
so that we'll be able to eliminate old_primary_state later. This
is fine since we always have either both old and new state or neither.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127190556.1574-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
In order to avoid keeping a reference on the i915_vma (which is long
overdue!) we have to coordinate all the possible lifetimes and only use
the vma while we know it is alive. In this episode, we are reminded that
while idle, the closed vma are destroyed. So if the GT idles while we are
working with the vma, the vma itself becomes invalid.
First class i915_vma here we come, but in the meantime keep piling on
the straw.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203155032.3137263-1-chris@chris-wilson.co.uk
Disabling pipe/transcoder clock before power down sink could cause
sink lost signal, causing it to trigger a hotplug to notify source
that link signal was lost.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202222513.337777-2-jose.souza@intel.com
If the CRTC is going from enabled to disabled and it is a port sync
slave, it needs to check to the old state to be disabled before the
port sync master.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202222513.337777-1-jose.souza@intel.com
Let's move handling and reset for gen11 display IRQs to their own
functions, similar to how we deal with GT interrupts. This will make
the top-level functions a bit easier to read and potentially make things
easier to deal with in the future if new platforms wind up needing
different display handling logic.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202171608.3361125-1-matthew.d.roper@intel.com
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Rather than assume if and only if the engine->default_state is not set
that the context is invalid, instead track when we know the context has
valid state -- either because we have copied the default_state or we
have completed a context switch to save the HW state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203124155.3019926-1-chris@chris-wilson.co.uk
Only along the submission path can we guarantee that the locked request
is indeed from a foreign engine, and so the nesting of engine/rq is
permissible. On the submission tasklet (process_csb()), we may find
ourselves competing with the normal nesting of rq/engine, invalidating
our nesting. As we only use the spinlock for debug purposes, skip the
debug if we cannot acquire the spinlock for safe validation - catching
99% of the bugs is better than causing a hard lockup.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: c95d31c3df ("drm/i915/execlists: Lock the request while validating it during promotion")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203152631.3107653-2-chris@chris-wilson.co.uk
Similar to for i915_active.mutex, we require each class of i915_active
to have distinct lockdep chains as some, but by no means all,
i915_active are used within the shrinker and so have much more severe
usage constraints. By using a lockclass local to i915_active_init() all
i915_active workers have the same lock class, and we may generate false
positives when waiting for the i915_active. If we push the lockclass
into the caller, each class of i915_active will have distinct lockdep
chains.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202140133.2444217-1-chris@chris-wilson.co.uk
The unaligned ioread32() will make us read byte by byte looking for the
vbt. We could just as well have done a ioread8() + a shift and avoid the
extra confusion on how we are looking for "$VBT".
However when using ACPI it's guaranteed the VBT is 4-byte aligned
per spec, so we can probably assume it here as well.
v2: do not try to simplify the loop by eliminating the auxiliary counter
(Jani and Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126225110.8127-4-lucas.demarchi@intel.com
We don't need to keep the pci rom mapped during the entire
intel_bios_init() anymore. Move it to the previous copy_vbt() function
and rename it to oprom_get_vbt() since now it's responsible to to all
operations related to get the vbt from the oprom.
v2: fix double __iomem attribute detected by sparse
v3: fix missing unmap on success (Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126225110.8127-3-lucas.demarchi@intel.com
When we map the VBT through pci_map_rom() we may not be allowed
to simply discard the address space and go on reading the memory.
That doesn't work on my test system, but by dumping the rom via
sysfs I can can get the correct vbt. So change our find_vbt() to do
the same as done by pci_read_rom(), i.e. use memcpy_fromio().
v2: the just the minimal changes by not bothering with the unaligned io
reads: this can be done on top (from Ville and Jani)
v3: drop const in function return since now we are copying the vbt,
rather than just finding it
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126225110.8127-2-lucas.demarchi@intel.com
From VBT 228+ this is block that PSR and other power saving
features configuration should be read from.
v3:
Using DRRS from this new block
v4:
Using BIT()
Fixing DRRS comment in parse_power_conservation_features()
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-5-jose.souza@intel.com
eDP specification states that sink can have its PSR capability
changed, I have never found any panel doing that but lets add that
for completeness.
For now it is not reading back the PSR capabilities and if possible
re-enabling PSR, this will be added if a panel is found using this
feature.
v4:
Cleaning DP_PSR_CAPS_CHANGE
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-4-jose.souza@intel.com
When this error happens sink link is not stable after the required
FW_EXIT_LATENCY period so it will miss the selective update.
As the other PSR errors, for now we are not trying to recover from
it.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-3-jose.souza@intel.com
