The refactoring of el2_setup split code setting up EL2 and detecting the
CPU boot mode in separate chunks. This allows the code that sets up EL2 to
run in an endian independent way - ie before the endianess is set up in
the respective sctlr registers.
This patch brings secondary_entry up-to-date so that CPUs entering the
kernel through this code path set-up EL2 and the cpu boot mode properly.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Mark Rutland <mark.rutand@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Rather than continue to add per platform defaults, make the default a
likely common core count. 8 is also the default for x86.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently there is no dsb between the tlbi in __cpu_setup and the write
to SCTLR_EL1 which enables the MMU in __turn_mmu_on. This means that the
TLB invalidation is not guaranteed to have completed at the point
address translation is enabled, leading to a number of possible issues
including incorrect translations and TLB conflict faults.
This patch moves the tlbi in __cpu_setup above an existing dsb used to
synchronise I-cache invalidation, ensuring that the TLBs have been
invalidated at the point the MMU is enabled.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
PTE_PROT_NONE means that a pte is present but does not have any
read/write attributes. However, setting the memory type like
pgprot_writecombine() is allowed and such bits overlap with
PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the
vma->vm_pg_prot on PROT_NONE mappings.
This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit
59911ca432 (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE
together with the other software bits.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org> # 3.11+
This provides better performance compared to Device GRE and also allows
unaligned accesses. Such memory is intended to be used with standard RAM
(e.g. framebuffers) and not I/O.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The current breakpoint instruction checking code for A32 is not endian
clean. Fix this with appropriate byte-swapping when retrieving
instructions.
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On a BE system the wrong half of the X registers is retrieved/written
when attempting to get/set the value of aarch32 registers through
ptrace.
Ensure that types are the correct width so that the relevant
casting occurs.
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The asynchronous aborts are generally fatal for the kernel but they can
be masked via the pstate A bit. If a system error happens while in
kernel mode, it won't be visible until returning to user space. This
patch enables this kind of abort early to help identifying the cause.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
With the spin-table SMP booting method, secondary CPUs poll a location
passed in the DT. The foundation-v8.dts file doesn't have this memory
reserved and there is a risk of Linux using it before secondary CPUs are
started.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit f27dde8dee (sched: Add NEED_RESCHED to the preempt_count)
introduced the use of bit 31 in preempt_count for obscure scheduling
purposes.
This causes interrupts taken from EL0 to hit the (open coded) BUG when
this flag is flipped while handling the interrupt (we compare the
values before and after, and kill the kernel if they are different).
The fix is to stop messing with the preempt count entirely, as this
is already being dealt with in the generic code (irq_enter/irq_exit).
Tested on a dual A53 FPGA running cyclictest.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull irq cleanups from Ingo Molnar:
"This is a multi-arch cleanup series from Thomas Gleixner, which we
kept to near the end of the merge window, to not interfere with
architecture updates.
This series (motivated by the -rt kernel) unifies more aspects of IRQ
handling and generalizes PREEMPT_ACTIVE"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
preempt: Make PREEMPT_ACTIVE generic
sparc: Use preempt_schedule_irq
ia64: Use preempt_schedule_irq
m32r: Use preempt_schedule_irq
hardirq: Make hardirq bits generic
m68k: Simplify low level interrupt handling code
genirq: Prevent spurious detection for unconditionally polled interrupts
side: the HV and emulation flavors can now coexist in a single kernel
is probably the most interesting change from a user point of view.
On the x86 side there are nested virtualization improvements and a
few bugfixes. ARM got transparent huge page support, improved
overcommit, and support for big endian guests.
Finally, there is a new interface to connect KVM with VFIO. This
helps with devices that use NoSnoop PCI transactions, letting the
driver in the guest execute WBINVD instructions. This includes
some nVidia cards on Windows, that fail to start without these
patches and the corresponding userspace changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=rWNf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM changes from Paolo Bonzini:
"Here are the 3.13 KVM changes. There was a lot of work on the PPC
side: the HV and emulation flavors can now coexist in a single kernel
is probably the most interesting change from a user point of view.
On the x86 side there are nested virtualization improvements and a few
bugfixes.
ARM got transparent huge page support, improved overcommit, and
support for big endian guests.
Finally, there is a new interface to connect KVM with VFIO. This
helps with devices that use NoSnoop PCI transactions, letting the
driver in the guest execute WBINVD instructions. This includes some
nVidia cards on Windows, that fail to start without these patches and
the corresponding userspace changes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
kvm, vmx: Fix lazy FPU on nested guest
arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu
arm/arm64: KVM: MMIO support for BE guest
kvm, cpuid: Fix sparse warning
kvm: Delete prototype for non-existent function kvm_check_iopl
kvm: Delete prototype for non-existent function complete_pio
hung_task: add method to reset detector
pvclock: detect watchdog reset at pvclock read
kvm: optimize out smp_mb after srcu_read_unlock
srcu: API for barrier after srcu read unlock
KVM: remove vm mmap method
KVM: IOMMU: hva align mapping page size
KVM: x86: trace cpuid emulation when called from emulator
KVM: emulator: cleanup decode_register_operand() a bit
KVM: emulator: check rex prefix inside decode_register()
KVM: x86: fix emulation of "movzbl %bpl, %eax"
kvm_host: typo fix
KVM: x86: emulate SAHF instruction
MAINTAINERS: add tree for kvm.git
Documentation/kvm: add a 00-INDEX file
...
- SWIOTLB has tracing added when doing bounce buffer.
- Xen ARM/ARM64 can use Xen-SWIOTLB. This work allows Linux to
safely program real devices for DMA operations when running as
a guest on Xen on ARM, without IOMMU support.*1
- xen_raw_printk works with PVHVM guests if needed.
Bug-fixes:
- Make memory ballooning work under HVM with large MMIO region.
- Inform hypervisor of MCFG regions found in ACPI DSDT.
- Remove deprecated IRQF_DISABLED.
- Remove deprecated __cpuinit.
[*1]:
"On arm and arm64 all Xen guests, including dom0, run with second stage
translation enabled. As a consequence when dom0 programs a device for a
DMA operation is going to use (pseudo) physical addresses instead
machine addresses. This work introduces two trees to track physical to
machine and machine to physical mappings of foreign pages. Local pages
are assumed mapped 1:1 (physical address == machine address). It
enables the SWIOTLB-Xen driver on ARM and ARM64, so that Linux can
translate physical addresses to machine addresses for dma operations
when necessary. " (Stefano).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSgS86AAoJEFjIrFwIi8fJpY4H/R2gke1A1p9UvTwbkaDhgPs/
u/mkI6aH+ktgvu5QZNprki660uydtc4Ck7y8leeLGYw+ed1Ys559SJhRc/x8jBYZ
Hh2chnplld0LAjSpdIDTTePArE1xBo4Gz+fT0zc5cVh0leJwOXn92Kx8N5AWD/T3
gwH4Ok4K1dzZBIls7imM2AM/L1xcApcx3Dl/QpNcoePQtR4yLuPWMUbb3LM8pbUY
0B6ZVN4GOhtJ84z8HRKnh4uMnBYmhmky6laTlHVa6L+j1fv7aAPCdNbePjIt/Pvj
HVYB1O/ht73yHw0zGfK6lhoGG8zlu+Q7sgiut9UsGZZfh34+BRKzNTypqJ3ezQo=
=xc43
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.13-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen updates from Konrad Rzeszutek Wilk:
"This has tons of fixes and two major features which are concentrated
around the Xen SWIOTLB library.
The short <blurb> is that the tracing facility (just one function) has
been added to SWIOTLB to make it easier to track I/O progress.
Additionally under Xen and ARM (32 & 64) the Xen-SWIOTLB driver
"is used to translate physical to machine and machine to physical
addresses of foreign[guest] pages for DMA operations" (Stefano) when
booting under hardware without proper IOMMU.
There are also bug-fixes, cleanups, compile warning fixes, etc.
The commit times for some of the commits is a bit fresh - that is b/c
we wanted to make sure we have the Ack's from the ARM folks - which
with the string of back-to-back conferences took a bit of time. Rest
assured - the code has been stewing in #linux-next for some time.
Features:
- SWIOTLB has tracing added when doing bounce buffer.
- Xen ARM/ARM64 can use Xen-SWIOTLB. This work allows Linux to
safely program real devices for DMA operations when running as a
guest on Xen on ARM, without IOMMU support. [*1]
- xen_raw_printk works with PVHVM guests if needed.
Bug-fixes:
- Make memory ballooning work under HVM with large MMIO region.
- Inform hypervisor of MCFG regions found in ACPI DSDT.
- Remove deprecated IRQF_DISABLED.
- Remove deprecated __cpuinit.
[*1]:
"On arm and arm64 all Xen guests, including dom0, run with second
stage translation enabled. As a consequence when dom0 programs a
device for a DMA operation is going to use (pseudo) physical
addresses instead machine addresses. This work introduces two trees
to track physical to machine and machine to physical mappings of
foreign pages. Local pages are assumed mapped 1:1 (physical address
== machine address). It enables the SWIOTLB-Xen driver on ARM and
ARM64, so that Linux can translate physical addresses to machine
addresses for dma operations when necessary. " (Stefano)"
* tag 'stable/for-linus-3.13-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (32 commits)
xen/arm: pfn_to_mfn and mfn_to_pfn return the argument if nothing is in the p2m
arm,arm64/include/asm/io.h: define struct bio_vec
swiotlb-xen: missing include dma-direction.h
pci-swiotlb-xen: call pci_request_acs only ifdef CONFIG_PCI
arm: make SWIOTLB available
xen: delete new instances of added __cpuinit
xen/balloon: Set balloon's initial state to number of existing RAM pages
xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG areas.
xen: remove deprecated IRQF_DISABLED
x86/xen: remove deprecated IRQF_DISABLED
swiotlb-xen: fix error code returned by xen_swiotlb_map_sg_attrs
swiotlb-xen: static inline xen_phys_to_bus, xen_bus_to_phys, xen_virt_to_bus and range_straddles_page_boundary
grant-table: call set_phys_to_machine after mapping grant refs
arm,arm64: do not always merge biovec if we are running on Xen
swiotlb: print a warning when the swiotlb is full
swiotlb-xen: use xen_dma_map/unmap_page, xen_dma_sync_single_for_cpu/device
xen: introduce xen_dma_map/unmap_page and xen_dma_sync_single_for_cpu/device
tracing/events: Fix swiotlb tracepoint creation
swiotlb-xen: use xen_alloc/free_coherent_pages
xen: introduce xen_alloc/free_coherent_pages
...
We've switched over every architecture that supports SMP to it, so
remove the new useless config variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ARM updates from Russell King:
"Included in this series are:
1. BE8 (modern big endian) changes for ARM from Ben Dooks
2. big.Little support from Nicolas Pitre and Dave Martin
3. support for LPAE systems with all system memory above 4GB
4. Perf updates from Will Deacon
5. Additional prefetching and other performance improvements from Will.
6. Neon-optimised AES implementation fro Ard.
7. A number of smaller fixes scattered around the place.
There is a rather horrid merge conflict in tools/perf - I was never
notified of the conflict because it originally occurred between Will's
tree and other stuff. Consequently I have a resolution which Will
forwarded me, which I'll forward on immediately after sending this
mail.
The other notable thing is I'm expecting some build breakage in the
crypto stuff on ARM only with Ard's AES patches. These were merged
into a stable git branch which others had already pulled, so there's
little I can do about this. The problem is caused because these
patches have a dependency on some code in the crypto git tree - I
tried requesting a branch I can pull to resolve these, and all I got
each time from the crypto people was "we'll revert our patches then"
which would only make things worse since I still don't have the
dependent patches. I've no idea what's going on there or how to
resolve that, and since I can't split these patches from the rest of
this pull request, I'm rather stuck with pushing this as-is or
reverting Ard's patches.
Since it should "come out in the wash" I've left them in - the only
build problems they seem to cause at the moment are with randconfigs,
and since it's a new feature anyway. However, if by -rc1 the
dependencies aren't in, I think it'd be best to revert Ard's patches"
I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences. Any errors are likely mine. Let's
see how the crypto issues work out..
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
ARM: 7871/1: amba: Extend number of IRQS
ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
ARM: 7878/1: nommu: Implement dummy early_paging_init()
ARM: 7876/1: clear Thumb-2 IT state on exception handling
ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
ARM: footbridge: fix build warnings for netwinder
ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
ARM: fix misplaced arch_virt_to_idmap()
ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
ARM: 7862/1: pcpu: replace __get_cpu_var_uses
ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
...
Merge first patch-bomb from Andrew Morton:
"Quite a lot of other stuff is banked up awaiting further
next->mainline merging, but this batch contains:
- Lots of random misc patches
- OCFS2
- Most of MM
- backlight updates
- lib/ updates
- printk updates
- checkpatch updates
- epoll tweaking
- rtc updates
- hfs
- hfsplus
- documentation
- procfs
- update gcov to gcc-4.7 format
- IPC"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
ipc, msg: fix message length check for negative values
ipc/util.c: remove unnecessary work pending test
devpts: plug the memory leak in kill_sb
./Makefile: export initial ramdisk compression config option
init/Kconfig: add option to disable kernel compression
drivers: w1: make w1_slave::flags long to avoid memory corruption
drivers/w1/masters/ds1wm.cuse dev_get_platdata()
drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
drivers/memstick/core/mspro_block.c: fix attributes array allocation
drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
kernel/panic.c: reduce 1 byte usage for print tainted buffer
gcov: reuse kbasename helper
kernel/gcov/fs.c: use pr_warn()
kernel/module.c: use pr_foo()
gcov: compile specific gcov implementation based on gcc version
gcov: add support for gcc 4.7 gcov format
gcov: move gcov structs definitions to a gcc version specific file
kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
...
Pull vfs updates from Al Viro:
"All kinds of stuff this time around; some more notable parts:
- RCU'd vfsmounts handling
- new primitives for coredump handling
- files_lock is gone
- Bruce's delegations handling series
- exportfs fixes
plus misc stuff all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits)
ecryptfs: ->f_op is never NULL
locks: break delegations on any attribute modification
locks: break delegations on link
locks: break delegations on rename
locks: helper functions for delegation breaking
locks: break delegations on unlink
namei: minor vfs_unlink cleanup
locks: implement delegations
locks: introduce new FL_DELEG lock flag
vfs: take i_mutex on renamed file
vfs: rename I_MUTEX_QUOTA now that it's not used for quotas
vfs: don't use PARENT/CHILD lock classes for non-directories
vfs: pull ext4's double-i_mutex-locking into common code
exportfs: fix quadratic behavior in filehandle lookup
exportfs: better variable name
exportfs: move most of reconnect_path to helper function
exportfs: eliminate unused "noprogress" counter
exportfs: stop retrying once we race with rename/remove
exportfs: clear DISCONNECTED on all parents sooner
exportfs: more detailed comment for path_reconnect
...
Use more appropriate NUMA_NO_NODE instead of -1 in all archs' module_alloc()
Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
usual for this cycle with lots of clean-up.
- Cross arch clean-up and consolidation of early DT scanning code.
- Clean-up and removal of arch prom.h headers. Makes arch specific
prom.h optional on all but Sparc.
- Addition of interrupts-extended property for devices connected to
multiple interrupt controllers.
- Refactoring of DT interrupt parsing code in preparation for deferred
probe of interrupts.
- ARM cpu and cpu topology bindings documentation.
- Various DT vendor binding documentation updates.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJSgPQ4AAoJEMhvYp4jgsXif28H/1WkrXq5+lCFQZF8nbYdE2h0
R8PsfiJJmAl6/wFgQTsRel+ScMk2hiP08uTyqf2RLnB1v87gCF7MKVaLOdONfUDi
huXbcQGWCmZv0tbBIklxJe3+X3FIJch4gnyUvPudD1m8a0R0LxWXH/NhdTSFyB20
PNjhN/IzoN40X1PSAhfB5ndWnoxXBoehV/IVHVDU42vkPVbVTyGAw5qJzHW8CLyN
2oGTOalOO4ffQ7dIkBEQfj0mrgGcODToPdDvUQyyGZjYK2FY2sGrjyquir6SDcNa
Q4gwatHTu0ygXpyphjtQf5tc3ZCejJ/F0s3olOAS1ahKGfe01fehtwPRROQnCK8=
=GCbY
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DeviceTree updates for 3.13. This is a bit larger pull request than
usual for this cycle with lots of clean-up.
- Cross arch clean-up and consolidation of early DT scanning code.
- Clean-up and removal of arch prom.h headers. Makes arch specific
prom.h optional on all but Sparc.
- Addition of interrupts-extended property for devices connected to
multiple interrupt controllers.
- Refactoring of DT interrupt parsing code in preparation for
deferred probe of interrupts.
- ARM cpu and cpu topology bindings documentation.
- Various DT vendor binding documentation updates"
* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
powerpc: add missing explicit OF includes for ppc
dt/irq: add empty of_irq_count for !OF_IRQ
dt: disable self-tests for !OF_IRQ
of: irq: Fix interrupt-map entry matching
MIPS: Netlogic: replace early_init_devtree() call
of: Add Panasonic Corporation vendor prefix
of: Add Chunghwa Picture Tubes Ltd. vendor prefix
of: Add AU Optronics Corporation vendor prefix
of/irq: Fix potential buffer overflow
of/irq: Fix bug in interrupt parsing refactor.
of: set dma_mask to point to coherent_dma_mask
of: add vendor prefix for PHYTEC Messtechnik GmbH
DT: sort vendor-prefixes.txt
of: Add vendor prefix for Cadence
of: Add empty for_each_available_child_of_node() macro definition
arm/versatile: Fix versatile irq specifications.
of/irq: create interrupts-extended property
microblaze/pci: Drop PowerPC-ism from irq parsing
of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
of/irq: Use irq_of_parse_and_map()
...
bug fixes along with updates to existing clock drivers and the
additional of new clock drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=wBeW
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linux
Pull clock framework changes from Mike Turquette:
"The clock changes for 3.13 are an even mix of framework improvements &
bug fixes along with updates to existing clock drivers and the
additional of new clock drivers"
* tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linux:
clk: new driver for efm32 SoC
clk: of: helper for determining number of parent clocks
clk/zynq: Fix possible memory leak
clk: keystone: Build Keystone clock drivers
clk: keystone: Add gate control clock driver
clk: keystone: add Keystone PLL clock driver
Documentation: Add documentation for APM X-Gene clock binding
clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC
clk: Add APM X-Gene SoC clock driver
clk: wm831x: get rid of the implementation of remove function
clk: Correct lookup logic in clk_fetch_parent_index()
clk: Use kcalloc() to allocate arrays
clk: Add error handling to clk_fetch_parent_index()
Pull timer changes from Ingo Molnar:
"Main changes in this cycle were:
- Updated full dynticks support.
- Event stream support for architected (ARM) timers.
- ARM clocksource driver updates.
- Move arm64 to using the generic sched_clock framework & resulting
cleanup in the generic sched_clock code.
- Misc fixes and cleanups"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
x86/time: Honor ACPI FADT flag indicating absence of a CMOS RTC
clocksource: sun4i: remove IRQF_DISABLED
clocksource: sun4i: Report the minimum tick that we can program
clocksource: sun4i: Select CLKSRC_MMIO
clocksource: Provide timekeeping for efm32 SoCs
clocksource: em_sti: convert to clk_prepare/unprepare
time: Fix signedness bug in sysfs_get_uname() and its callers
timekeeping: Fix some trivial typos in comments
alarmtimer: return EINVAL instead of ENOTSUPP if rtcdev doesn't exist
clocksource: arch_timer: Do not register arch_sys_counter twice
timer stats: Add a 'Collection: active/inactive' line to timer usage statistics
sched_clock: Remove sched_clock_func() hook
arch_timer: Move to generic sched_clock framework
clocksource: tcb_clksrc: Remove IRQF_DISABLED
clocksource: tcb_clksrc: Improve driver robustness
clocksource: tcb_clksrc: Replace clk_enable/disable with clk_prepare_enable/disable_unprepare
clocksource: arm_arch_timer: Use clocksource for suspend timekeeping
clocksource: dw_apb_timer_of: Mark a few more functions as __init
clocksource: Put nodes passed to CLOCKSOURCE_OF_DECLARE callbacks centrally
arm: zynq: Enable arm_global_timer
...
Pull scheduler changes from Ingo Molnar:
"The main changes in this cycle are:
- (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik
van Riel, Peter Zijlstra et al. Yay!
- optimize preemption counter handling: merge the NEED_RESCHED flag
into the preempt_count variable, by Peter Zijlstra.
- wait.h fixes and code reorganization from Peter Zijlstra
- cfs_bandwidth fixes from Ben Segall
- SMP load-balancer cleanups from Peter Zijstra
- idle balancer improvements from Jason Low
- other fixes and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED
stop_machine: Fix race between stop_two_cpus() and stop_cpus()
sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus
sched: Fix asymmetric scheduling for POWER7
sched: Move completion code from core.c to completion.c
sched: Move wait code from core.c to wait.c
sched: Move wait.c into kernel/sched/
sched/wait: Fix __wait_event_interruptible_lock_irq_timeout()
sched: Avoid throttle_cfs_rq() racing with period_timer stopping
sched: Guarantee new group-entities always have weight
sched: Fix hrtimer_cancel()/rq->lock deadlock
sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining
sched: Fix race on toggling cfs_bandwidth_used
sched: Remove extra put_online_cpus() inside sched_setaffinity()
sched/rt: Fix task_tick_rt() comment
sched/wait: Fix build breakage
sched/wait: Introduce prepare_to_wait_event()
sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too
sched: Remove get_online_cpus() usage
sched: Fix race in migrate_swap_stop()
...
- A couple a basic fixes for running BE guests on a LE host
- A performance improvement for overcommitted VMs (same as the equivalent
patch for ARM)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=s0ny
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm64/for-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into kvm-next
A handful of fixes for KVM/arm64:
- A couple a basic fixes for running BE guests on a LE host
- A performance improvement for overcommitted VMs (same as the equivalent
patch for ARM)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Conflicts:
arch/arm/include/asm/kvm_emulate.h
arch/arm64/include/asm/kvm_emulate.h
In current kernel wide source code, except other architectures, only
s390 scsi drivers use atomic_clear_mask(), and arm/arm64 need not
support s390 drivers.
So remove atomic_clear_mask() from "arm[64]/include/asm/atomic.h".
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When booting a vcpu using PSCI, make sure we start it with the
endianness of the caller. Otherwise, secondaries can be pretty
unhappy to execute a BE kernel in LE mode...
This conforms to PSCI spec Rev B, 5.13.3.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Do the necessary byteswap when host and guest have different
views of the universe. Actually, the only case we need to take
care of is when the guest is BE. All the other cases are naturally
handled.
Also be careful about endianness when the data is being memcopy-ed
from/to the run buffer.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The non-IPI interrupts are displayed only for the online cpus from
show_interrupts in kernel/irq/proc.c before calling arch_show_interrupts().
As a result, the column headers and the IPI count don't match if any
CPU is offline.
This patch fixes show_ipi_list to display IPIs for online CPUs only.
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ensure that accesses to the GICH_* registers are byteswapped
when the kernel is compiled as big-endian.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Force SCTLR_EL2.EE to 1 if the kernel is compiled as BE.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ARM architecture reference specifies that the IT state bits in the
PSR must be all zeros in ARM mode or behavior is unspecified. If an ARM
function is registered as a signal handler, and that signal is delivered
inside a block of instructions following an IT instruction, some of the
instructions at the beginning of the signal handler may be skipped if
the IT state bits of the Program Status Register are not cleared by the
kernel.
Signed-off-by: T.J. Purtell <tj@mobisocial.us>
[catalin.marinas@arm.com: code comment and commit log updated]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch expands the VA_BITS to 42 when the 64K page configuration is
enabled allowing 2TB kernel linear mapping. Linux still uses 2 levels of
page tables in this configuration with pgd now being a full page.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Relocations that require an instruction immediate to be re-encoded must
ensure that the instruction pattern is represented in a little-endian
format for the manipulation code to work correctly.
This patch converts the loaded instruction into native-endianess prior
to encoding and then converts back to little-endian byteorder before
updating memory.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Tested-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
preempt_count is defined as an int. Oddly enough, we access it
as a 64bit value. Things become interesting when running a BE
kernel, and looking at the current CPU number, which is stored
as an int next to preempt_count. Like in a per-cpu interrupt
handler, for example...
Using a 32bit access fixes the issue for good.
Cc: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 53ae3acd (arm64: Only enable local interrupts after the CPU
is marked online) moved the enabling of the GIC after the CPUs are
marked online.
This has some interesting effect:
[...]
[<ffffffc0002eefd8>] gic_raise_softirq+0xf8/0x160
[<ffffffc000088f58>] smp_send_reschedule+0x38/0x40
[<ffffffc0000c8728>] resched_task+0x84/0xc0
[<ffffffc0000c8cdc>] check_preempt_curr+0x58/0x98
[<ffffffc0000c8d38>] ttwu_do_wakeup+0x1c/0xf4
[<ffffffc0000c8f90>] ttwu_do_activate.constprop.84+0x64/0x70
[<ffffffc0000cad30>] try_to_wake_up+0x1d4/0x2b4
[<ffffffc0000cae6c>] default_wake_function+0x10/0x18
[<ffffffc0000c5ca4>] __wake_up_common+0x60/0xa0
[<ffffffc0000c7784>] complete+0x48/0x64
[<ffffffc000088bec>] secondary_start_kernel+0xe8/0x110
[...]
Here, we end-up calling gic_raise_softirq without having initialized
the interrupt controller for this CPU. While this goes unnoticed
with GICv2 (the distributor is always accessible), it explodes with
GICv3.
The fix is to move the call to notify_cpu_starting before we set
the secondary CPU online.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The .data section in the arm64 linker script currently lacks a
definition for page-aligned data. This leads to a .page_aligned
section being placed between the end of data and start of bss.
This patch corrects that by using the generic RW_DATA_SECTION
macro which includes support for page-aligned data.
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit e8765b265a (arm64: read enable-method for CPU0) introduced
checks for the enable method on CPU0 (to be later used with CPU
suspend). However, if the kernel is compiled for UP and a DT file is
used with a method like 'spin-table', Linux complains about 'invalid
enable method'. This patch turns it into an 'unsupported enable method'
warning.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Once the cpu_logical_map for any logical cpu is populated with the
corresponding physical identifier(i.e. mpidr), it's device node can
be retrieved using the DT helper 'of_get_cpu_node'. Currently the
device tree parsing code to get boot cpu node is duplicated in
'cpu_read_bootcpu_ops'.
This patch replaces the code parsing the device tree for the boot
cpu with of_get_cpu_node.
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
OF/DT core library provides architecture specific hook to match the
logical cpu index with the corresponding physical identifier.
On ARM64, the MPIDR_EL1 contains specific bitfields(MPIDR_EL1.Aff{3..0})
which uniquely identify a CPU, in addition to some non-identifying
information and reserved bits. The ARM cpu binding defines the 'reg'
property to only contain the affinity bits, and any cpu nodes with other
bits set in their 'reg' entry are skipped.
This patch overrides the weak definition of arch_match_cpu_phys_id
with ARM64 specific version using MPIDR_EL1.Aff{3..0} as cpu physical
identifiers.
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some drivers (ACPI notably) use ioremap_cache() to map an area which could
either be outside of kernel RAM or in an already mapped reserved area of
RAM. To avoid aliases with different caching attributes, ioremap() does
not allow RAM to be remapped. But for ioremap_cache(), the existing kernel
mapping may be used.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On an (even slightly) oversubscribed system, spinlocks are quickly
becoming a bottleneck, as some vcpus are spinning, waiting for a
lock to be released, while the vcpu holding the lock may not be
running at all.
The solution is to trap blocking WFEs and tell KVM that we're
now spinning. This ensures that other vpus will get a scheduling
boost, allowing the lock to be released more quickly. Also, using
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT slightly improves the performance
when the VM is severely overcommited.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This is the ARM part of Christoph's patchset cleaning up the various
uses of __get_cpu_var across the tree.
The idea is to convert __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations
that use the offset. Thereby address calculations are avoided and fewer
registers are used when code is generated.
[will: fixed debug ref counting checks and pcpu array accesses]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- Transparent Huge Pages and hugetlbfs support for KVM/ARM
- Yield CPU when guest executes WFE to speed up CPU overcommit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJSZ5NVAAoJEEtpOizt6ddyEJgH+wWw6KWqHlParb+rf04cqCQV
Fj3euz+SpYr2U2u0RimgkmeahUiGUhnlBSSH+tkLmt1if6nLawBJbUcIhaZMVdv+
cvS6k+NtK7ibwPOyFeoZCS8taEbVDut2YgrtRKbne6QDLRYBEXFtpY8o6ptLoSu4
ifQCF0FZyElCGLylSxFt9GsK+LjNjQWatVrzoHap9d58u2bma6GYwr4mEzVMHms7
REtTvpwWgsDR5C/69aG8wE4cpJZALH3OeCgy6AccdzTLaQWWpK2YLWz8AFOvoYx6
EsFmBFHZYcuwN+fv2jILgA3Is1oWwqI6k5lL+N3g/oTNNALDSWnfiJkXypJsfow=
=2Ijm
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-3.13-2' of git://git.linaro.org/people/cdall/linux-kvm-arm into kvm-queue
Updates for KVM/ARM, take 2 including:
- Transparent Huge Pages and hugetlbfs support for KVM/ARM
- Yield CPU when guest executes WFE to speed up CPU overcommit
This patch updates the barrier semantics in the kuser helper functions
to take advantage of the ARMv8 additions to AArch32, which are
guaranteed to be available in situations where these functions will be
called.
Note that this slightly changes the cmpxchg functions in that they are
no longer necessarily full barriers if they return 1. However, the
documentation only states they include their own barriers "as needed",
not that they are obligated to act as a full barrier for the caller.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
CC: Matthew Leach <matthew.leach@arm.com>
CC: Dave Martin <dave.martin@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch fixes ARMV8_EVTYPE_* macros since evtCount (event number)
field width is 10bits in event selection register.
Signed-off-by: Vinayak Kale <vkale@apm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch wires up CONFIG_CPU_BIG_ENDIAN for the AArch64 kernel
configuration.
Selecting this option builds a big-endian kernel which can boot into a
big-endian userspace.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The owner and next members of the arch_spinlock_t structure need to be
swapped when compiling for big endian.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Matthew Leach <matthew.leach@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Currently when CPUs are brought online via a spin-table, the address
they should jump to is written to the cpu-release-addr in the kernel's
native endianness. As the kernel may switch endianness, secondaries
might read the value byte-reversed from what was intended, and they
would jump to the wrong address.
As the only current arm64 spin-table implementations are
little-endian, stricten up the arm64 spin-table definition such that
the value written to cpu-release-addr is _always_ little-endian
regardless of the endianness of any CPU. If a spinning CPU is
operating big-endian, it must byte-reverse the value before jumping to
handle this.
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The endianness of memory accesses at EL2 and EL1 are configured by
SCTLR_EL2.EE and SCTLR_EL1.EE respectively. When the kernel is booted,
the state of SCTLR_EL{2,1}.EE is unknown, and thus the kernel must
ensure that they are set before performing any memory accesses.
This patch ensures that SCTLR_EL{2,1} are configured appropriately at
boot for kernels of either endianness.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
[catalin.marinas@arm.com: fix SCTLR_EL1.E0E bit setting in head.S]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently, the code for setting the __cpu_boot_mode flag is munged in
with el2_setup. This makes things difficult on a BE bringup as a
memory access has to have occurred before el2_setup which is the place
that we'd like to set the endianess on the current EL.
Create a new function for setting __cpu_boot_mode and have el2_setup
return the mode the CPU. Also define a new constant in virt.h,
BOOT_CPU_MODE_EL1, for readability.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add CPU_LE and CPU_BE to select assembler code in little and big
endian configurations respectively.
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the sigreturn compat code is copied to an offset in the
vectors table. When using a BE kernel this data will be stored in the
wrong endianess so when returning from a signal on a 32-bit BE system,
arbitrary code will be executed.
Instead of declaring the code inside a struct and copying that, use
the assembler's .byte directives to store the code in the correct
endianess regardless of platform endianess.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 port contains wrappers for arm32 syscalls that pass 64-bit
values. These wrappers concatenate the two registers to hold a 64-bit
value in a single X register. On BE, however, the lower and higher
words are swapped.
Create a new assembler macro, regs_to_64, that when on BE systems
swaps the registers in the orr instruction.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds support for BE8 AArch32 tasks to the compat layer.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
uname -m reports the machine field from the current utsname, which should
reflect the endianness of the system.
This patch reports ELF_PLATFORM for the field, so that everything appears
consistent from userspace.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds support for the aarch64_be ELF format to the AArch64 ELF
loader.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For big-endian processors, we must include
linux/byteorder/big_endian.h to get the relevant definitions for
swabbing between CPU order and a defined endianness.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds big-endian support to the AArch64 top-level Makefile.
This currently just passes the relevant flags to the toolchain and is
predicated on a Kconfig option that will be introduced later on.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This is similar to what it is done on X86: biovecs are prevented from merging
otherwise every dma requests would be forced to bounce on the swiotlb buffer.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Changes in v7:
- remove the extra autotranslate check in biomerge.c.
Introduce xen_dma_map_page, xen_dma_unmap_page,
xen_dma_sync_single_for_cpu and xen_dma_sync_single_for_device.
They have empty implementations on x86 and ia64 but they call the
corresponding platform dma_ops function on arm and arm64.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Changes in v9:
- xen_dma_map_page return void, avoid page_to_phys.
This patch adds support for using PSCI CPU_OFF calls for CPU hotplug.
With this code it is possible to hot unplug CPUs with "psci" as their
boot-method, as long as there's an appropriate cpu_off function id
specified in the psci node.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds the basic infrastructure necessary to support
CPU_HOTPLUG on arm64, based on the arm implementation. Actual hotplug
support will depend on an implementation's cpu_operations (e.g. PSCI).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
With the advent of CPU_HOTPLUG, the enable-method property for CPU0 may
tells us something useful (i.e. how to hotplug it back on), so we must
read it along with all the enable-method for all the other CPUs. Even
on UP the enable-method may tell us useful information (e.g. if a core
has some mechanism that might be usable for cpuidle), so we should
always read it.
This patch factors out the reading of the enable method, and ensures
that CPU0's enable method is read regardless of whether the kernel is
built with SMP support.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 kernel has an internal holding pen, which is necessary for
some systems where we can't bring CPUs online individually and must hold
multiple CPUs in a safe area until the kernel is able to handle them.
The current SMP infrastructure for arm64 is closely coupled to this
holding pen, and alternative boot methods must launch CPUs into the pen,
where they sit before they are launched into the kernel proper.
With PSCI (and possibly other future boot methods), we can bring CPUs
online individually, and need not perform the secondary_holding_pen
dance. Instead, this patch factors the holding pen management code out
to the spin-table boot method code, as it is the only boot method
requiring the pen.
A new entry point for secondaries, secondary_entry is added for other
boot methods to use, which bypasses the holding pen and its associated
overhead when bringing CPUs online. The smp.pen.text section is also
removed, as the pen can live in head.text without problem.
The cpu_operations structure is extended with two new functions,
cpu_boot and cpu_postboot, for bringing a cpu into the kernel and
performing any post-boot cleanup required by a bootmethod (e.g.
resetting the secondary_holding_pen_release to INVALID_HWID).
Documentation is added for cpu_operations.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For hotplug support, we're going to want a place to store operations
that do more than bring CPUs online, and it makes sense to group these
with our current smp_enable_ops. For cpuidle support, we'll want to
group additional functions, and we may want them even for UP kernels.
This patch renames smp_enable_ops to the more general cpu_operations,
and pulls the definitions out of smp code such that they can be used in
UP kernels. While we're at it, fix up instances of the cpu parameter to
be an unsigned int, drop the init markings and rename the *_cpu
functions to cpu_* to reduce future churn when cpu_operations is
extended.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The functions in psci.c are only used from smp_psci.c, and smp_psci
cannot function without psci.c. Additionally psci.c is built when !SMP,
where it's expected that cpu_suspend may be useful.
This patch unifies the two files, removing pointless duplication and
paving the way for PSCI support in UP systems.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This function may be called from loadable modules, so it needs
exporting.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Loc Ho <lho@apm.com>
This patch introduces cmpxchg64_relaxed for arm64 using the existing
cmpxchg_local macro, which performs a cmpxchg operation (up to 64 bits)
without barrier semantics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Our spinlocks are only 32-bit (2x16-bit tickets) and our cmpxchg can
deal with 8-bytes (as one would hope!).
This patch wires up the cmpxchg-based lockless lockref implementation
for arm64.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch introduces a ticket lock implementation for arm64, along the
same lines as the implementation for arch/arm/.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In ftrace_syscall_enter(),
syscall_get_arguments(..., 0, n, ...)
if (i == 0) { <handle orig_x0> ...; n--;}
memcpy(..., n * sizeof(args[0]));
If 'number of arguments(n)' is zero and 'argument index(i)' is also zero in
syscall_get_arguments(), none of arguments should be copied by memcpy().
Otherwise 'n--' can be a big positive number and unexpected amount of data
will be copied. Tracing system calls which take no argument, say sync(void),
may hit this case and eventually make the system corrupted.
This patch fixes the issue both in syscall_get_arguments() and
syscall_set_arguments().
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The KVM PSCI code blindly assumes that vcpu_id and MPIDR are
the same thing. This is true when vcpus are organized as a flat
topology, but is wrong when trying to emulate any other topology
(such as A15 clusters).
Change the KVM PSCI CPU_ON code to look at the MPIDR instead
of the vcpu_id to pick a target CPU.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Support huge pages in KVM/ARM and KVM/ARM64. The pud_huge checking on
the unmap path may feel a bit silly as the pud_huge check is always
defined to false, but the compiler should be smart about this.
Note: This deals only with VMAs marked as huge which are allocated by
users through hugetlbfs only. Transparent huge pages can only be
detected by looking at the underlying pages (or the page tables
themselves) and this patch so far simply maps these on a page-by-page
level in the Stage-2 page tables.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJSXeGaAAoJEEtpOizt6ddyeyYH/AnWdKGUELjxC0lIBDkTitnD
znyzSxqXG6z1Z6d+EYI3XCL1eB3dtyOBSJsZj45adG4HXGkCmGqosgDzivGO6GcI
yhjYgXGhP8ZvIwky1ijbVQODaEE70SEYqKwyCpU4rLJw2uRkbfRaxTrpgnusL8Bg
RG37uaOS/sasLoNxCe5GEUjm8BFGbvZGVAjcL7yJTPBw5qd7GYBxndFSTILa2iRQ
ikoBD0bUVhoaBUqSNQenoNllUBwDpFJF1HiEXKMJkUIxX/FggrSvRp8A/MAWDBw0
6Ef1P8Pt/hMfMQpOOeu8QFWM2s+smh2rTkO/O9mqi/tSvEf5YcZHMAl48B8OR88=
=tJ2u
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-3.13-1' of git://git.linaro.org/people/cdall/linux-kvm-arm into next
Updates for KVM/ARM including cpu=host and Cortex-A7 support
Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Pull more timekeeping items for v3.13 from John Stultz:
* Small cleanup in the clocksource code.
* Fix for rtc-pl031 to let it work with alarmtimers.
* Move arm64 to using the generic sched_clock framework & resulting
cleanup in the generic sched_clock code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that prom.h is optional, all the empty prom.h headers can be removed.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Remove unnecessary prom.h include in preparation to make prom.h optional.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Convert arm64 to use the common of_flat_dt_get_machine_name function.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Register with the generic sched_clock framework now that it
supports 64 bits. This fixes two problems with the current
sched_clock support for machines using the architected timers.
First off, we don't subtract the start value from subsequent
sched_clock calls so we can potentially start off with
sched_clock returning gigantic numbers. Second, there is no
support for suspend/resume handling so problems such as discussed
in 6a4dae5 (ARM: 7565/1: sched: stop sched_clock() during
suspend, 2012-10-23) can happen without this patch. Finally, it
allows us to move the sched_clock setup into drivers clocksource
out of the arch ports.
Cc: Christopher Covington <cov@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
xen_swiotlb_alloc_coherent needs to allocate a coherent buffer for cpu
and devices. On native x86 is sufficient to call __get_free_pages in
order to get a coherent buffer, while on ARM (and potentially ARM64) we
need to call the native dma_ops->alloc implementation.
Introduce xen_alloc_coherent_pages to abstract the arch specific buffer
allocation.
Similarly introduce xen_free_coherent_pages to free a coherent buffer:
on x86 is simply a call to free_pages while on ARM and ARM64 is
arm_dma_ops.free.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Changes in v7:
- rename __get_dma_ops to __generic_dma_ops;
- call __generic_dma_ops(hwdev)->alloc/free on arm64 too.
Changes in v6:
- call __get_dma_ops to get the native dma_ops pointer on arm.
We can't simply override arm_dma_ops with xen_dma_ops because devices
are allowed to have their own dma_ops and they take precedence over
arm_dma_ops. When running on Xen as initial domain, we always want
xen_dma_ops to be the one in use.
We introduce __generic_dma_ops to allow xen_dma_ops functions to call
back to the native implementation.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
CC: will.deacon@arm.com
Changes in v7:
- return xen_dma_ops only if we are the initial domain;
- rename __get_dma_ops to __generic_dma_ops.
Xen on arm and arm64 needs SWIOTLB_XEN: when running on Xen we need to
program the hardware with mfns rather than pfns for dma addresses.
Remove SWIOTLB_XEN dependency on X86 and PCI and make XEN select
SWIOTLB_XEN on arm and arm64.
At the moment always rely on swiotlb-xen, but when Xen starts supporting
hardware IOMMUs we'll be able to avoid it conditionally on the presence
of an IOMMU on the platform.
Implement xen_create_contiguous_region on arm and arm64: for the moment
we assume that dom0 has been mapped 1:1 (physical addresses == machine
addresses) therefore we don't need to call XENMEM_exchange. Simply
return the physical address as dma address.
Initialize the xen-swiotlb from xen_early_init (before the native
dma_ops are initialized), set xen_dma_ops to &xen_swiotlb_dma_ops.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Changes in v8:
- assume dom0 is mapped 1:1, no need to call XENMEM_exchange.
Changes in v7:
- call __set_phys_to_machine_multi from xen_create_contiguous_region and
xen_destroy_contiguous_region to update the P2M;
- don't call XENMEM_unpin, it has been removed;
- call XENMEM_exchange instead of XENMEM_exchange_and_pin;
- set nr_exchanged to 0 before calling the hypercall.
Changes in v6:
- introduce and export xen_dma_ops;
- call xen_mm_init from as arch_initcall.
Changes in v4:
- remove redefinition of DMA_ERROR_CODE;
- update the code to use XENMEM_exchange_and_pin and XENMEM_unpin;
- add a note about hardware IOMMU in the commit message.
Changes in v3:
- code style changes;
- warn on XENMEM_put_dma_buf failures.
Introduce physical to machine and machine to physical tracking
mechanisms based on rbtrees for arm/xen and arm64/xen.
We need it because any guests on ARM are an autotranslate guests,
therefore a physical address is potentially different from a machine
address. When programming a device to do DMA, we need to be
extra-careful to use machine addresses rather than physical addresses to
program the device. Therefore we need to know the physical to machine
mappings.
For the moment we assume that dom0 starts with a 1:1 physical to machine
mapping, in other words physical addresses correspond to machine
addresses. However when mapping a foreign grant reference, obviously the
1:1 model doesn't work anymore. So at the very least we need to be able
to track grant mappings.
We need locking to protect accesses to the two trees.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Changes in v8:
- move pfn_to_mfn and mfn_to_pfn to page.h as static inline functions;
- no need to walk the tree if phys_to_mach.rb_node is NULL;
- correctly handle multipage p2m entries;
- substitute the spin_lock with a rwlock.
In order to unify the initrd scanning for DT across architectures, make
arm64 use initrd_start and initrd_end instead of the physical addresses.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Create a weak version of early_init_dt_add_memory_arch which uses
memblock. This will unify all architectures except ones with custom
memory bank structs.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: linux@lists.openrisc.net
Cc: devicetree@vger.kernel.org
Convert arm64 to use new early_init_dt_scan function.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSUc9zAAoJEHm+PkMAQRiG9DMH/AtpuAF6LlMRPjrCeuJQ1pyh
T0IUO+CsLKO6qtM5IyweP8V6zaasNjIuW1+B6IwVIl8aOrM+M7CwRiKvpey26ldM
I8G2ron7hqSOSQqSQs20jN2yGAqQGpYIbTmpdGLAjQ350NNNvEKthbP5SZR5PAmE
UuIx5OGEkaOyZXvCZJXU9AZkCxbihlMSt2zFVxybq2pwnGezRUYgCigE81aeyE0I
QLwzzMVdkCxtZEpkdJMpLILAz22jN4RoVDbXRa2XC7dA9I2PEEXI9CcLzqCsx2Ii
8eYS+no2K5N2rrpER7JFUB2B/2X8FaVDE+aJBCkfbtwaYTV9UYLq3a/sKVpo1Cs=
=xSFJ
-----END PGP SIGNATURE-----
Merge tag 'v3.12-rc4' into sched/core
Merge Linux v3.12-rc4 to fix a conflict and also to refresh the tree
before applying more scheduler patches.
Conflicts:
arch/avr32/include/asm/Kbuild
Signed-off-by: Ingo Molnar <mingo@kernel.org>
clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC with reference to
reference, PCP PLL, SoC PLL, and Ethernet clocks.
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Vinayak Kale <vkale@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch implements kvm_vcpu_preferred_target() function for
KVM ARM64 which will help us implement KVM_ARM_PREFERRED_TARGET
ioctl for user space.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
This config item already exists generically in lib/Kconfig.debug.
Remove the duplicate config in arm64.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently, development on arm64 is aided by a Foundation_v8 emulator
distributed by ARM [1]. To run their kernels, users will execute:
$ ./Foundation_v8 --image linux-system.axf --block-device raring-rootfs
To mount the raring-rootfs filesystem, the kernel parameter should
typically include:
root=/dev/vda
For this device to be present, the kernel must be compiled with
VIRTIO_{MMIO,BLK}. To make this work out-of-the-box, make it part of the
default configuration.
[1]: https://silver.arm.com/browse/FM00A
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Most readily available root filesystems are formatted as EXT4 these
days. For example, see the raring rootfs that the Debian folk is
preparing [1].
[1]: http://people.debian.org/~wookey/bootstrap/rootfs/
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If context switching happens during executing fpsimd_flush_thread(),
stale value in FPSIMD registers will be saved into current thread's
fpsimd_state by fpsimd_thread_switch(). That may cause invalid
initialization state for the new process, so disable preemption
when executing fpsimd_flush_thread().
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds support for configuring the event stream frequency
and enabling it.
It also adds the hwcaps as well as compat-specific definitions to
the user to detect this event stream feature.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Add macros to describe the bitfields in the ARM architected timer
control register to make code easy to understand.
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
The ASID is represented as an unsigned int in mm_context_t and we
currently use the mmid assembler macro to access this element of the
struct. This should be accessed with a register of 32-bit width. If
the incorrect register width is used the ASID will be returned in
bits[32:63] of the register when running under big-endian.
Fix a use of the mmid macro in tlb.S to use a 32-bit access.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
get_user() is defined as a function macro in arm64, and trace_get_user()
calls it as followed:
get_user(ch, ptr++);
Since the second parameter occurs twice in the definition, 'ptr++' is
unexpectedly evaluated twice and trace_get_user() will generate a bogus
string from user-provided one. As a result, some ftrace sysfs operations,
like "echo FUNCNAME > set_ftrace_filter," hit this case and eventually fail.
This patch fixes the issue both in get_user() and put_user().
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
[catalin.marinas@arm.com: added __user type annotation and s/optr/__p/]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to prepare to per-arch implementations of preempt_count move
the required bits into an asm-generic header and use this for all
archs.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-h5j0c1r3e3fk015m30h8f1zx@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Under arm64 elf_hwcap is a 32 bit quantity, but it is stored in
a 64 bit auxiliary ELF field and glibc reads hwcap as 64 bit.
This patch widens elf_hwcap to be 64 bit.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When a task crashes and we print debugging information, ensure that
compat tasks show the actual AArch32 LR and SP registers rather than the
AArch64 ones.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Unlike global OOM handling, memory cgroup code will invoke the OOM killer
in any OOM situation because it has no way of telling faults occuring in
kernel context - which could be handled more gracefully - from
user-triggered faults.
Pass a flag that identifies faults originating in user space from the
architecture-specific fault handlers to generic code so that memcg OOM
handling can be improved.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel faults are expected to handle OOM conditions gracefully (gup,
uaccess etc.), so they should never invoke the OOM killer. Reserve this
for faults triggered in user context when it is the only option.
Most architectures already do this, fix up the remaining few.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently hugepage migration works well only for pmd-based hugepages
(mainly due to lack of testing,) so we had better not enable migration of
other levels of hugepages until we are ready for it.
Some users of hugepage migration (mbind, move_pages, and migrate_pages) do
page table walk and check pud/pmd_huge() there, so they are safe. But the
other users (softoffline and memory hotremove) don't do this, so without
this patch they can try to migrate unexpected types of hugepages.
To prevent this, we introduce hugepage_migration_support() as an
architecture dependent check of whether hugepage are implemented on a pmd
basis or not. And on some architecture multiple sizes of hugepages are
available, so hugepage_migration_support() also checks hugepage size.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Generally minor changes. A bunch of bug fixes, particularly for
initialization and some refactoring. Most notable change if feeding the
entire flattened tree into the random pool at boot. May not be
significant, but shouldn't hurt either.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=GSWl
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux
Pull device tree core updates from Grant Likely:
"Generally minor changes. A bunch of bug fixes, particularly for
initialization and some refactoring. Most notable change if feeding
the entire flattened tree into the random pool at boot. May not be
significant, but shouldn't hurt either"
Tim Bird questions whether the boot time cost of the random feeding may
be noticeable. And "add_device_randomness()" is definitely not some
speed deamon of a function.
* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux:
of/platform: add error reporting to of_amba_device_create()
irq/of: Fix comment typo for irq_of_parse_and_map
of: Feed entire flattened device tree into the random pool
of/fdt: Clean up casting in unflattening path
of/fdt: Remove duplicate memory clearing on FDT unflattening
gpio: implement gpio-ranges binding document fix
of: call __of_parse_phandle_with_args from of_parse_phandle
of: introduce of_parse_phandle_with_fixed_args
of: move of_parse_phandle()
of: move documentation of of_parse_phandle_with_args
of: Fix missing memory initialization on FDT unflattening
of: consolidate definition of early_init_dt_alloc_memory_arch()
of: Make of_get_phy_mode() return int i.s.o. const int
include: dt-binding: input: create a DT header defining key codes.
of/platform: Staticize of_platform_device_create_pdata()
of: Specify initrd location using 64-bit
dt: Typo fix
OF: make of_property_for_each_{u32|string}() use parameters if OF is not enabled
ignored by the CPU).
- Kernel mode NEON (no users for arm64 yet but work in progress).
- arm64 kernel Image header extended to accommodate future EFI stub.
- Remove BogoMIPS reporting (not relevant, it's just the timer
frequency).
- Clean-up (EM_AARCH64/EM_ARM to elf-em.h, ELF notes in read-only
segment, unused variable).
- Bug-fixes (RAM boundaries not 2MB aligned, perf, includes).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=5w0G
-----END PGP SIGNATURE-----
Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull ARM64 update from Catalin Marinas:
- User tagged pointers support (top 8-bit of user pointers
automatically ignored by the CPU).
- Kernel mode NEON (no users for arm64 yet but work in progress).
- arm64 kernel Image header extended to accommodate future EFI stub.
- Remove BogoMIPS reporting (not relevant, it's just the timer
frequency).
- Clean-up (EM_AARCH64/EM_ARM to elf-em.h, ELF notes in read-only
segment, unused variable).
- Bug-fixes (RAM boundaries not 2MB aligned, perf, includes).
* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
Documentation/arm64: clarify requirements for DTB placement
arm64: mm: permit use of tagged pointers at EL0
Move the EM_ARM and EM_AARCH64 definitions to uapi/linux/elf-em.h
arm64: Remove unused cpu_name ascii in arch/arm64/mm/proc.S
arm64: delay: don't bother reporting bogomips in /proc/cpuinfo
arm64: Fix mapping of memory banks not ending on a PMD_SIZE boundary
arm64: move elf notes into readonly segment
arm64: Enable interrupts in the EL0 undef handler
arm64: Expand arm64 image header
ARM64: include: asm: include "asm/types.h" in "pgtable-2level-types.h" and "pgtable-3level-types.h"
arm64: add support for kernel mode NEON
arm64: perf: fix ARMv8 EVTYPE_MASK to include NSH bit
arm64: perf: fix group validation when using enable_on_exec
TCR.TBI0 can be used to cause hardware address translation to ignore the
top byte of userspace virtual addresses. Whilst not especially useful in
standard C programs, this can be used by JITs to `tag' pointers with
various pieces of metadata.
This patch enables this bit for AArch64 Linux, and adds a new file to
Documentation/arm64/ which describes some potential caveats when using
tagged virtual addresses.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We always use a timer-backed delay loop for arm64, so don't bother
reporting a bogomips value which appears to confuse some people.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Most architectures use the same implementation. Collapse the common ones
into a single weak function that can be overridden.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
The map_mem() function limits the current memblock limit to PGDIR_SIZE
(the initial swapper_pg_dir mapping) to avoid create_mapping()
allocating memory from unmapped areas. However, if the first block is
within PGDIR_SIZE and not ending on a PMD_SIZE boundary, when 4K page
configuration is enabled, create_mapping() will try to allocate a pte
page. Such page may be returned by memblock_alloc() from the end of such
bank (or any subsequent bank within PGDIR_SIZE) which is not mapped yet.
The patch limits the current memblock limit to the aligned end of the
first bank and gradually increases it as more memory is mapped. It also
ensures that the start of the first bank is aligned to PMD_SIZE to avoid
pte page allocation for this mapping.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: "Leizhen (ThunderTown, Euler)" <thunder.leizhen@huawei.com>
Tested-by: "Leizhen (ThunderTown, Euler)" <thunder.leizhen@huawei.com>
The current vmlinux.lds.S places the notes sections between the
end of rw data and start of bss. This means that _edata doesn't
really point to the end of data. Since notes are read-only, this
patch moves them to the read-only segment so that _edata does
point to the end of initialized rw data.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
do_undefinstr() has to be called with interrupts disabled since it may
read the instruction from the user address space which could lead to a
data abort and subsequent might_sleep() warning in do_page_fault().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Expand the arm64 image header to allow for co-existance with
PE/COFF header required by the EFI stub. The PE/COFF format
requires the "MZ" header to be at offset 0, and the offset
to the PE/COFF header to be at offset 0x3c. The image
header is expanded to allow 2 instructions at the beginning
to accommodate a benign intruction at offset 0 that includes
the "MZ" header, a magic number, and the offset to the PE/COFF
header.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Need include "asm/types.h", just like arm has done, or can not pass
compiling, the related error:
In file included from arch/arm64/include/asm/page.h:37:0,
from drivers/staging/lustre/include/linux/lnet/linux/lib-lnet.h:42,
from drivers/staging/lustre/include/linux/lnet/lib-lnet.h:44,
from drivers/staging/lustre/lnet/lnet/api-ni.c:38:
arch/arm64/include/asm/pgtable-2level-types.h:19:1: error: unknown type name ‘u64
arch/arm64/include/asm/pgtable-2level-types.h:20:1: error: unknown type name ‘u64’
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(discovered with Vince's fuzzing tool).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=Lajp
-----END PGP SIGNATURE-----
Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 perf fixes from Catalin Marinas:
"Perf backend fixes for arm64 where the user can cause kernel panic
(discovered with Vince's fuzzing tool)"
* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: perf: fix event validation for software group leaders
arm64: perf: fix array out of bounds access in armpmu_map_hw_event()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=RlHG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fixes for ARM and aarch64.
This pull request is coming a bit later than I would have preferred,
because I and Gleb happened to have holidays around the same weeks of
August... sorry about that"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ARM: Squash len warning
arm64: KVM: use 'int' instead of 'u32' for variable 'target' in kvm_host.h.
arm64: KVM: add missing dsb before invalidating Stage-2 TLBs
arm64: KVM: perform save/restore of PAR_EL1
arm64: KVM: fix 2-level page tables unmapping
ARM: KVM: Fix unaligned unmap_range leak
ARM: KVM: Fix 64-bit coprocessor handling
* Support for memory mapped arch_timers
* Trivial fixes to the moxart timer code
* Documentation updates
Trivial conflicts in drivers/clocksource/arm_arch_timer.c. Fixed up
the newly added __cpuinit annotations as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add <asm/neon.h> containing kernel_neon_begin/kernel_neon_end function
declarations and corresponding definitions in fpsimd.c
These are needed to wrap uses of NEON in kernel mode. The names are
identical to the ones used in arm/ so code using intrinsics or
vectorized by GCC can be shared between arm and arm64.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This is a port of f2fe09b055 ("ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK
to include NSH bit") to arm64, which fixes the broken evtype mask to
include the NSH bit, allowing profiling at EL2.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This is a port of cb2d8b342a ("ARM: 7698/1: perf: fix group validation
when using enable_on_exec") to arm64, which fixes the event validation
checking so that events in the OFF state are still considered when
enable_on_exec is true.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This is a port of c95eb3184e ("ARM: 7809/1: perf: fix event validation
for software group leaders") to arm64, which fixes a panic in the arm64
perf backend found as a result of Vince's fuzzing tool.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This is a port of d9f966357b ("ARM: 7810/1: perf: Fix array out of
bounds access in armpmu_map_hw_event()") to arm64, which fixes an oops
in the arm64 perf backend found as a result of Vince's fuzzing tool.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ben Tebulin reported:
"Since v3.7.2 on two independent machines a very specific Git
repository fails in 9/10 cases on git-fsck due to an SHA1/memory
failures. This only occurs on a very specific repository and can be
reproduced stably on two independent laptops. Git mailing list ran
out of ideas and for me this looks like some very exotic kernel issue"
and bisected the failure to the backport of commit 53a59fc67f ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").
That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.
The real bug is that the TLB gather virtual memory range setup is subtly
buggered. It was introduced in commit 597e1c3580 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a96c ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.
The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB. And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.
Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.
This makes the patch larger, but conceptually much simpler. And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.
Ben verified that this fixes his problem.
Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com>
Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au>
Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'target' will be set to '-1' in kvm_arch_vcpu_init(), and it need check
'target' whether less than zero or not in kvm_vcpu_initialized().
So need define target as 'int' instead of 'u32', just like ARM has done.
The related warning:
arch/arm64/kvm/../../../arch/arm/kvm/arm.c:497:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
Signed-off-by: Chen Gang <gang.chen@asianux.com>
[Marc: reformated the Subject line to fit the series]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When performing a Stage-2 TLB invalidation, it is necessary to
make sure the write to the page tables is observable by all CPUs.
For this purpose, add dsb instructions to __kvm_tlb_flush_vmid_ipa
and __kvm_flush_vm_context before doing the TLB invalidation itself.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Not saving PAR_EL1 is an unfortunate oversight. If the guest
performs an AT* operation and gets scheduled out before reading
the result of the translation from PAREL1, it could become
corrupted by another guest or the host.
Saving this register is made slightly more complicated as KVM also
uses it on the permission fault handling path, leading to an ugly
"stash and restore" sequence. Fortunately, this is already a slow
path so we don't really care. Also, Linux doesn't do any AT*
operation, so Linux guests are not impacted by this bug.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We're going to introduce support to read and write the memory
mapped timer registers in the next patch, so push the cp15
read/write functions one level deeper. This simplifies the next
patch and makes it clearer what's going on.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <Marc.Zyngier@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Using an enum for the register we wish to access allows newer
compilers to determine if we've forgotten a case in our switch
statement. This allows us to remove the BUILD_BUG() instances in
the arm64 port, avoiding problems where optimizations may not
happen.
To try and force better code generation we're currently marking
the accessor functions as inline, but newer compilers can ignore
the inline keyword unless it's marked __always_inline. Luckily on
arm and arm64 inline is __always_inline, but let's make
everything __always_inline to be explicit.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <Marc.Zyngier@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Written by Catalin Marinas, tested by APM on storm platform. This is needed
because of the failures encountered when running SpecWeb benchmark test.
Signed-off-by: Feng Kan <fkan@apm.com>
Acked-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On some PAE architectures, the entire range of physical memory could reside
outside the 32-bit limit. These systems need the ability to specify the
initrd location using 64-bit numbers.
This patch globally modifies the early_init_dt_setup_initrd_arch() function to
use 64-bit numbers instead of the current unsigned long.
There has been quite a bit of debate about whether to use u64 or phys_addr_t.
It was concluded to stick to u64 to be consistent with rest of the device
tree code. As summarized by Geert, "The address to load the initrd is decided
by the bootloader/user and set at that point later in time. The dtb should not
be tied to the kernel you are booting"
More details on the discussion can be found here:
https://lkml.org/lkml/2013/6/20/690https://lkml.org/lkml/2012/9/13/544
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Commit ff70130 (arm64: use common reboot infrastructure) converted the
arm_pm_restart declaration to the new reboot infrastructure but missed
the actual definition.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Secondary CPUs write to __boot_cpu_mode with caches disabled, and thus a
cached value of __boot_cpu_mode may be incoherent with that in memory.
This could lead to a failure to detect mismatched boot modes.
This patch adds flushing to ensure that writes by secondaries to
__boot_cpu_mode are made visible before we test against it.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- Fixes (user cache maintenance fault handling, !COMPAT compilation, CPU
online and interrupt hanlding).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=M4kj
-----END PGP SIGNATURE-----
Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 fixes from Catalin Marinas:
- Post -rc1 update to the common reboot infrastructure.
- Fixes (user cache maintenance fault handling, !COMPAT compilation,
CPU online and interrupt hanlding).
* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: use common reboot infrastructure
arm64: mm: don't treat user cache maintenance faults as writes
arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler()
arm64: Only enable local interrupts after the CPU is marked online
Commit 7b6d864b48 (reboot: arm: change reboot_mode to use enum
reboot_mode) changed the way reboot is handled on arm, which has a
direct impact on arm64 as we share the reset driver on the VE platform.
The obvious fix is to move arm64 to use the same infrastructure.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[catalin.marinas@arm.com: removed reboot_mode = REBOOT_HARD default setting]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On arm64, cache maintenance faults appear as data aborts with the CM
bit set in the ESR. The WnR bit, usually used to distinguish between
faulting loads and stores, always reads as 1 and (slightly confusingly)
the instructions are treated as reads by the architecture.
This patch fixes our fault handling code to treat cache maintenance
faults in the same way as loads.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If 'COMPAT' not defined, aarch32_break_handler() cannot pass compiling,
and it can work independent with 'COMPAT', so remove dummy definition.
The related error:
arch/arm64/kernel/debug-monitors.c:249:5: error: redefinition of ‘aarch32_break_handler’
In file included from arch/arm64/kernel/debug-monitors.c:29:0:
/root/linux-next/arch/arm64/include/asm/debug-monitors.h:89:12: note: previous definition of ‘aarch32_break_handler’ was here
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There is a slight chance that (timer) interrupts are triggered before a
secondary CPU has been marked online with implications on softirq thread
affinity.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Kirill Tkhai <tkhai@yandex.ru>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/arm64 uses of the __cpuinit macros from
all C files. Currently arm64 does not have any __CPUINIT used in
assembly files.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Pull more KVM changes from Gleb Natapov:
"A fix for a bug that prevents some guests from working on old Intel
CPUs and a patch that integrates ARM64 KVM, merged via ARM64 tree,
into Kconfig."
* tag 'kvm-3.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: mark unusable segment as nonpresent
arm64: KVM: Kconfig integration
Since all architectures have been converted to use vm_unmapped_area(),
there is no remaining use for the free_area_cache.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=XQbF
-----END PGP SIGNATURE-----
Merge tag 'xenarm-for-3.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen
Pull Xen ARM update rom Stefano Stabellini:
"Just one commit this time: the implementation of the tmem hypercall
for arm and arm64"
* tag 'xenarm-for-3.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen:
xen/arm and xen/arm64: implement HYPERVISOR_tmem_op
Finally plug KVM/arm64 into the config system, making it possible
to enable KVM support on AArch64 CPUs.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for removing num_physpages and simplify mem_init().
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prepare for removing num_physpages and simplify mem_init().
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Concentrate code to modify totalram_pages into the mm core, so the arch
memory initialized code doesn't need to take care of it. With these
changes applied, only following functions from mm core modify global
variable totalram_pages: free_bootmem_late(), free_all_bootmem(),
free_all_bootmem_node(), adjust_managed_page_count().
With this patch applied, it will be much more easier for us to keep
totalram_pages and zone->managed_pages in consistence.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Address more review comments from last round of code review.
1) Enhance free_reserved_area() to support poisoning freed memory with
pattern '0'. This could be used to get rid of poison_init_mem()
on ARM64.
2) A previous patch has disabled memory poison for initmem on s390
by mistake, so restore to the original behavior.
3) Remove redundant PAGE_ALIGN() when calling free_reserved_area().
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change signature of free_reserved_area() according to Russell King's
suggestion to fix following build warnings:
arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default]
free_reserved_area(__va(PHYS_PFN_OFFSET), swapper_pg_dir, 0, NULL);
^
In file included from include/linux/mman.h:4:0,
from arch/arm/mm/init.c:15:
include/linux/mm.h:1301:22: note: expected 'long unsigned int' but argument is of type 'void *'
extern unsigned long free_reserved_area(unsigned long start, unsigned long end,
mm/page_alloc.c: In function 'free_reserved_area':
>> mm/page_alloc.c:5134:3: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [enabled by default]
In file included from arch/mips/include/asm/page.h:49:0,
from include/linux/mmzone.h:20,
from include/linux/gfp.h:4,
from include/linux/mm.h:8,
from mm/page_alloc.c:18:
arch/mips/include/asm/io.h:119:29: note: expected 'const volatile void *' but argument is of type 'long unsigned int'
mm/page_alloc.c: In function 'free_area_init_nodes':
mm/page_alloc.c:5030:34: warning: array subscript is below array bounds [-Warray-bounds]
Also address some minor code review comments.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- KVM and Xen ports to AArch64
- Hugetlbfs and transparent huge pages support for arm64
- Applied Micro X-Gene Kconfig entry and dts file
- Cache flushing improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iQIcBAABAgAGBQJR0bZAAAoJEGvWsS0AyF7xTEEP/R/aRoqWwbVAMlwAhujq616O
t4RzIyBXZXqxS9I+raokCX4mgYxdeisJlzN2hoq73VEX2BQlXZoYh8vmfY9WeNSM
2pdfif2HF7oo9ymCRyqfuhbumPrTyJhpbguzOYrxPqpp2f1hv2D8hbUJEFj429yL
UjqTFoONngfouZmAlwrPGZQKhBI95vvN53yvDMH0PWfvpm07DKGIQMYp20y0pj8j
slhLH3bh2kfpS1cf23JtH6IICwWD2pXW0POo569CfZry6bI74xve+Trcsm7iPnsO
PSI1P046ME1mu3SBbKwiPIdN/FQqWwTHW07fvMmH/xuXu3Zs/mxgzi7vDzDrVvTg
PJSbKWD6N/IPPwKS/gCUmWWDASO0bXx3KlDuRZqAjbRojs0UPUOTUhzJM/BHUms1
vY2QS9lAm02LmZZrk1LeKKP85gB+qKQvHuOVhIOldWeLGKtsNufz1kynz6YTqsLq
uUB55KwbhQ7q8+aoY6lWujqiTXMoLkBgGdjHs2I407PAv7ZjlhRWk2fIry7xJifp
rKu2cIlWsRe4CGvGI410NvIJFrGvJAV4wA43sgBDjPumyILgT/5jw9r3RpJEBZZs
akw/Bl1CbL+gMjyoPUWgcWZdRkUCE0eLrgyMOmaYfst8cOTaWw4dWLvUG/bBZg+Y
mGnuEQUQtAPadk8P/Sv3
=PZ/e
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull ARM64 updates from Catalin Marinas:
"Main features:
- KVM and Xen ports to AArch64
- Hugetlbfs and transparent huge pages support for arm64
- Applied Micro X-Gene Kconfig entry and dts file
- Cache flushing improvements
For arm64 huge pages support, there are x86 changes moving part of
arch/x86/mm/hugetlbpage.c into mm/hugetlb.c to be re-used by arm64"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (66 commits)
arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board
arm64: Add defines for APM ARMv8 implementation
arm64: Enable APM X-Gene SOC family in the defconfig
arm64: Add Kconfig option for APM X-Gene SOC family
arm64/Makefile: provide vdso_install target
ARM64: mm: THP support.
ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.
ARM64: mm: HugeTLB support.
ARM64: mm: Move PTE_PROT_NONE bit.
ARM64: mm: Make PAGE_NONE pages read only and no-execute.
ARM64: mm: Restore memblock limit when map_mem finished.
mm: thp: Correct the HPAGE_PMD_ORDER check.
x86: mm: Remove general hugetlb code from x86.
mm: hugetlb: Copy general hugetlb code from x86 to mm.
x86: mm: Remove x86 version of huge_pmd_share.
mm: hugetlb: Copy huge_pmd_share from x86 to mm.
arm64: KVM: document kernel object mappings in HYP
arm64: KVM: MAINTAINERS update
arm64: KVM: userspace API documentation
arm64: KVM: enable initialization of a 32bit vcpu
...
Pull ARM updates from Russell King:
"This contains the usual updates from other people (listed below) and
the usual random muddle of miscellaneous ARM updates which cover some
low priority bug fixes and performance improvements.
I've started to put the pull request wording into the merge commits,
which are:
- NoMMU stuff:
This includes the following series sent earlier to the list:
- nommu-fixes
- R7 Support
- MPU support
I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I
were discussing today until we've reached a conclusion/that's had
some more review.
This is rebased (and re-tested) on your devel-stable branch because
otherwise there were going to be conflicts with Uwe's V7M work now
that you've merged that. I've included the fix for limiting MPU to
CPU_V7.
- Huge page support
These changes bring both HugeTLB support and Transparent HugePage
(THP) support to ARM. Only long descriptors (LPAE) are supported
in this series.
The code has been tested on an Arndale board (Exynos 5250).
- LPAE updates
Please pull these miscellaneous LPAE fixes I've been collecting for
a while now for 3.11. They've been tested and reviewed by quite a
few people, and most of the patches are pretty trivial. -- Will Deacon.
- arch_timer cleanups
Please pull these arch_timer cleanups I've been holding onto for a
while. They're the same as my last posting, but have been rebased
to v3.10-rc3.
- mpidr linearisation (multiprocessor id register - identifies which
CPU number we are in the system)
This patch series that implements MPIDR linearization through a
simple hashing algorithm and updates current cpu_{suspend}/{resume}
code to use the newly created hash structures to retrieve context
pointers. It represents a stepping stone for the implementation of
power management code on forthcoming multi-cluster ARM systems.
It has been tested on TC2 (dual cluster A15xA7 system), iMX6q,
OMAP4 and Tegra, with processors hitting low-power states requiring
warm-boot resume through the cpu_resume code path"
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
ARM: 7775/1: mm: Remove do_sect_fault from LPAE code
ARM: 7777/1: Avoid extra calls to the C compiler
ARM: 7774/1: Fix dtb dependency to use order-only prerequisites
ARM: 7770/1: remove residual ARMv2 support from decompressor
ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation
ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator
ARM: 7767/1: let the ASID allocator handle suspended animation
ARM: 7766/1: versatile: don't mark pen as __INIT
ARM: 7765/1: perf: Record the user-mode PC in the call chain.
ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork
ARM: kernel: implement stack pointer save array through MPIDR hashing
ARM: kernel: build MPIDR hash function data structure
ARM: mpu: Ensure that MPU depends on CPU_V7
ARM: mpu: protect the vectors page with an MPU region
ARM: mpu: Allow enabling of the MPU via kconfig
ARM: 7758/1: introduce config HAS_BANDGAP
ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting
ARM: 7751/1: zImage: don't overwrite ourself with a page table
ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock
ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace
...
Pull voluntary preemption fixes from Ingo Molnar:
"This tree contains a speedup which is achieved through better
might_sleep()/might_fault() preemption point annotations for uaccess
functions, by Michael S Tsirkin:
1. The only reason uaccess routines might sleep is if they fault.
Make this explicit for all architectures.
2. A voluntary preemption point in uaccess functions means compiler
can't inline them efficiently, this breaks assumptions that they
are very fast and small that e.g. net code seems to make. Remove
this preemption point so behaviour matches with what callers
assume.
3. Accesses (e.g through socket ops) to kernel memory with KERNEL_DS
like net/sunrpc does will never sleep. Remove an unconditinal
might_sleep() in the might_fault() inline in kernel.h (used when
PROVE_LOCKING is not set).
4. Accesses with pagefault_disable() return EFAULT but won't cause
caller to sleep. Check for that and thus avoid might_sleep() when
PROVE_LOCKING is set.
These changes offer a nice speedup for CONFIG_PREEMPT_VOLUNTARY=y
kernels, here's a network bandwidth measurement between a virtual
machine and the host:
before:
incoming: 7122.77 Mb/s
outgoing: 8480.37 Mb/s
after:
incoming: 8619.24 Mb/s [ +21.0% ]
outgoing: 9455.42 Mb/s [ +11.5% ]
I kept these changes in a separate tree, separate from scheduler
changes, because it's a mixed MM and scheduler topic"
* 'sched-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm, sched: Allow uaccess in atomic with pagefault_disable()
mm, sched: Drop voluntary schedule from might_fault()
x86: uaccess s/might_sleep/might_fault/
tile: uaccess s/might_sleep/might_fault/
powerpc: uaccess s/might_sleep/might_fault/
mn10300: uaccess s/might_sleep/might_fault/
microblaze: uaccess s/might_sleep/might_fault/
m32r: uaccess s/might_sleep/might_fault/
frv: uaccess s/might_sleep/might_fault/
arm64: uaccess s/might_sleep/might_fault/
asm-generic: uaccess s/might_sleep/might_fault/
Pull VFS patches (part 1) from Al Viro:
"The major change in this pile is ->readdir() replacement with
->iterate(), dealing with ->f_pos races in ->readdir() instances for
good.
There's a lot more, but I'd prefer to split the pull request into
several stages and this is the first obvious cutoff point."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (67 commits)
[readdir] constify ->actor
[readdir] ->readdir() is gone
[readdir] convert ecryptfs
[readdir] convert coda
[readdir] convert ocfs2
[readdir] convert fatfs
[readdir] convert xfs
[readdir] convert btrfs
[readdir] convert hostfs
[readdir] convert afs
[readdir] convert ncpfs
[readdir] convert hfsplus
[readdir] convert hfs
[readdir] convert befs
[readdir] convert cifs
[readdir] convert freevxfs
[readdir] convert fuse
[readdir] convert hpfs
reiserfs: switch reiserfs_readdir_dentry to inode
reiserfs: is_privroot_deh() needs only directory inode, actually
...
* 'for-next/hugepages' of git://git.linaro.org/people/stevecapper/linux:
ARM64: mm: THP support.
ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.
ARM64: mm: HugeTLB support.
ARM64: mm: Move PTE_PROT_NONE bit.
ARM64: mm: Make PAGE_NONE pages read only and no-execute.
ARM64: mm: Restore memblock limit when map_mem finished.
mm: thp: Correct the HPAGE_PMD_ORDER check.
x86: mm: Remove general hugetlb code from x86.
mm: hugetlb: Copy general hugetlb code from x86 to mm.
x86: mm: Remove x86 version of huge_pmd_share.
mm: hugetlb: Copy huge_pmd_share from x86 to mm.
Conflicts:
arch/arm64/Kconfig
arch/arm64/include/asm/pgtable-hwdef.h
arch/arm64/include/asm/pgtable.h
This patch adds defines for APM CPU implementer ID and APM CPU part numbers in asm/cputype.h
Signed-off-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch enables APM X-Gene SOC family in the defconfig. It also enables 8250 serial driver needed by X-Gene SOC family.
Signed-off-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
With this change, we no longer lose the innermost entry in the user-mode
part of the call chain. See also the x86 port, which includes the ip,
and the corresponding change in arch/arm.
Signed-off-by: Jed Davis <jld@mozilla.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Provide a vdso_install target in the arm64 Makefile, as other architectures
with a vdso do.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bring Transparent HugePage support to ARM. The size of a
transparent huge page depends on the normal page size. A
transparent huge page is always represented as a pmd.
If PAGE_SIZE is 4KB, THPs are 2MB.
If PAGE_SIZE is 64KB, THPs are 512MB.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
The buddy allocator has a default MAX_ORDER of 11, which is too
low to allocate enough memory for 512MB Transparent HugePages if
our base page size is 64KB.
This patch introduces MAX_ZONE_ORDER and sets it to 14 when 64KB
pages are used in conjuction with THP, otherwise the default value
of 11 is used.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Add huge page support to ARM64, different huge page sizes are
supported depending on the size of normal pages:
PAGE_SIZE is 4KB:
2MB - (pmds) these can be allocated at any time.
1024MB - (puds) usually allocated on bootup with the command line
with something like: hugepagesz=1G hugepages=6
PAGE_SIZE is 64KB:
512MB - (pmds) usually allocated on bootup via command line.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Under ARM64, PTEs can be broadly categorised as follows:
- Present and valid: Bit #0 is set. The PTE is valid and memory
access to the region may fault.
- Present and invalid: Bit #0 is clear and bit #1 is set.
Represents present memory with PROT_NONE protection. The PTE
is an invalid entry, and the user fault handler will raise a
SIGSEGV.
- Not present (file or swap): Bits #0 and #1 are clear.
Memory represented has been paged out. The PTE is an invalid
entry, and the fault handler will try and re-populate the
memory where necessary.
Huge PTEs are block descriptors that have bit #1 clear. If we wish
to represent PROT_NONE huge PTEs we then run into a problem as
there is no way to distinguish between regular and huge PTEs if we
set bit #1.
To resolve this ambiguity this patch moves PTE_PROT_NONE from
bit #1 to bit #2 and moves PTE_FILE from bit #2 to bit #3. The
number of swap/file bits is reduced by 1 as a consequence, leaving
60 bits for file and swap entries.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
If we consider the following code sequence:
my_pte = pte_modify(entry, myprot);
x = pte_write(my_pte);
y = pte_exec(my_pte);
If myprot comes from a PROT_NONE page, then x and y will both be
true which is undesireable behaviour.
This patch sets the no-execute and read-only bits for PAGE_NONE
such that the code above will return false for both x and y.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
In paging_init the memblock limit is set to restrict any addresses
returned by early_alloc to fit within the initial direct kernel
mapping in swapper_pg_dir. This allows map_mem to allocate puds,
pmds and ptes from the initial direct kernel mapping.
The limit stays low after paging_init() though, meaning any
bootmem allocations will be from a restricted subset of memory.
Gigabyte huge pages, for instance, are normally allocated from
bootmem as their order (18) is too large for the default buddy
allocator (MAX_ORDER = 11).
This patch restores the memblock limit when map_mem has finished,
allowing gigabyte huge pages (and other objects) to be allocated
from all of bootmem.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Wire the init of a 32bit vcpu by allowing 32bit modes in pstate,
and providing sensible defaults out of reset state.
This feature is of course conditioned by the presence of 32bit
capability on the physical CPU, and is checked by the KVM_CAP_ARM_EL1_32BIT
capability.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Allow registers specific to 32bit guests to be saved/restored
during the world switch.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Enable handling of CPU specific 32bit coprocessor access. Not much
here either.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Provide the necessary infrastructure to trap coprocessor accesses that
occur when running 32bit guests.
Also wire SMC and HVC trapped in 32bit mode while were at it.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
As conditional instructions can trap on AArch32, add the thinest
possible emulation layer to keep 32bit guests happy.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Allow access to the 32bit register file through the usual API.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Define the 32bit specific registers (SPSRs, cp15...).
Most CPU registers are directly mapped to a 64bit register
(r0->x0...). Only the SPSRs have separate registers.
cp15 registers are also mapped into their 64bit counterpart in most
cases.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Only the Makefile is plugged in. The Kconfig stuff is in a separate
patch to allow for an easier merge process.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Wire the PSCI backend into the exit handling code.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add support for the in-kernel timer emulation.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add support for the in-kernel GIC emulation.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Handle the exit of a VM, decoding the exit reason from HYP mode
and calling the corresponding handler.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The HYP mode world switch in all its glory.
Implements save/restore of host/guest registers, EL2 trapping,
IPA resolution, and additional services (tlb invalidation).
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=uMi/
-----END PGP SIGNATURE-----
Merge tag 'xen-arm64-3.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen into upstream
Introduce Xen support to ARM64
* tag 'xen-arm64-3.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen:
MAINTAINERS: add myself as arm64/xen maintainer
arm64/xen: introduce CONFIG_XEN and hypercall.S on ARM64
arm64/xen: use XEN_IO_PROTO_ABI_ARM on ARM64
arm64/xen: implement ioremap_cached on arm64
arm64/xen: introduce asm/xen header files on arm64
arm/xen: define xen_remap as ioremap_cached
The software breakpoint handlers are hooked in directly from ptrace,
which makes it difficult to add additional handlers for things like
kprobes and kgdb.
This patch moves the handling code into debug-monitors.c, where we can
dispatch to different debug subsystems more easily.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As is done for other architectures, sort the exception table at
build-time rather than during boot.
Since sortextable appears to be a standalone C program relying on the
host elf.h to provide EM_AARCH64, I've had to add a conditional check in
order to allow cross-compilation on machines that aren't running a
bleeding-edge libc-dev.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When using an IOMMU for device mappings, it is necessary to keep a
pointer between the device and the IOMMU to which it is attached in
order to obtain the correct IOMMU when attaching the device to a domain.
This patch adds an iommu pointer to the dev_archdata structure, in a
similar manner to other architectures (ARM, PowerPC, x86, ...).
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
pte_index is a useful helper outside of arch/arm64, for things like the
ARM SMMU driver, so rename __pte_index to pte_index to be consistent
with both arch/arm/ and also the definitions of pmd_index and pgd_index.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Under arm64, we will calibrate the delay loop statically using a known
timer frequency, so delete read_current_timer(), or it will cause
compiling issue with allmodconfig.
The related error:
ERROR: "read_current_timer" [lib/rbtree_test.ko] undefined!
ERROR: "read_current_timer" [lib/interval_tree_test.ko] undefined!
ERROR: "read_current_timer" [fs/ext4/ext4.ko] undefined!
ERROR: "read_current_timer" [crypto/tcrypt.ko] undefined!
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We don't support software broadcast of cache maintenance operations, so
this flush is not required (__sync_icache_dcache will always affect all
CPUs).
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
An exclusive store instruction may fail for reasons other than lock
contention (e.g. a cache eviction during the critical section) so, in
line with other architectures using similar exclusive instructions
(alpha, mips, powerpc), retry the trylock operation if the lock appears
to be free but the strex reported failure.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Tony Thompson <anthony.thompson@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
This function is only used in __sync_icache_dcache(), so remove it and
call __flush_dcache_area() directly. The flush_icache_user_range()
function is not used in the arm64 kernel.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
The D-cache on AArch64 is VIPT non-aliasing, so there is no need to
flush it for anonymous pages.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
The flush_dcache_page() function is called when the kernel modified a
page cache page. Since the D-cache on AArch64 does not have aliases
this function can simply mark the page as dirty for later flushing via
set_pte_at()/__sync_icache_dcache() if the page is executable (to ensure
the I-D cache coherency).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Most architectures that define CONFIG_HAS_DMA, have implementations for
both dma_alloc_attrs() and dma_free_attrs(). All achitectures that do
not define CONFIG_HAS_DMA also have both of these definitions provided
by dma-mapping-broken.h.
Add default implementations for these functions on arm64.
Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Provide EL2 with page tables and stack, and set the vectors
to point to the full blown world-switch code.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Let userspace play with the guest registers.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Define the necessary structures to perform an MMIO access.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Provide the architecture dependent structures for VM and
vcpu abstractions.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Provide the reset code for a virtual CPU booted in 64bit mode.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add the support code for CPU specific system registers. Not much
here yet.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Provide 64bit system register handling, modeled after the cp15
handling for ARM.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Provide the kvm.h file that defines the user space visible
interface.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Implement the injection of a fault (undefined, data abort or
prefetch abort) into a 64bit guest.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Implements helpers for dealing with the EL2 syndrome register as
well as accessing the vcpu registers.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Define the saved/restored registers for 64bit guests.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Define all the useful bitfields for EL2 registers.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add the necessary infrastructure for identity-mapped HYP page
tables. Idmap-ed code must be in the ".hyp.idmap.text" linker
section.
The rest of the HYP ends up in ".hyp.text".
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add HYP and S2 page flags, for both normal and device memory.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Introduce CONFIG_XEN and the implementation of hypercall.S (that is
the only ARMv8 specific code in Xen support for ARM).
Compile enlighten.c and grant_table.c from arch/arm.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
asm/xen/hypercall.h, asm/xen/hypervisor.h, asm/xen/interface.h and
asm/xen/page.h are identical so to avoid code duplication we are just
including the original arm header files here.
asm/xen/events.h is slightly different, so introduce a different file
here (use xchg to implement xchg_xen_ulong and pass regs->pstate to
raw_irqs_disabled_flags).
Also introduce asm/hypervisor.h and asm/sync_bitops.h.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Switching between reading the virtual or physical counters is
problematic, as some core code wants a view of time before we're fully
set up. Using a function pointer and switching the source after the
first read can make time appear to go backwards, and having a check in
the read function is an unfortunate block on what we want to be a fast
path.
Instead, this patch makes us always use the virtual counters. If we're a
guest, or don't have hyp mode, we'll use the virtual timers, and as such
don't care about CNTVOFF as long as it doesn't change in such a way as
to make time appear to travel backwards. As the guest will use the
virtual timers, a (potential) KVM host must use the physical timers
(which can wake up the host even if they fire while a guest is
executing), and hence a host must have CNTVOFF set to zero so as to have
a consistent view of time between the physical timers and virtual
counters.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Rather than completely killing the kernel if we receive an esr value we
can't deal with in the el0 handlers, send the process a SIGILL and log
the esr value in the hope that we can debug it. If we receive a bad esr
from el1, we'll die() as before.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
Currently, if a compat process reads or writes from/to a disabled
cp15/cp14 register, the trap is not handled by the el0_sync_compat
handler, and the kernel will head to bad_mode, where it will die(), and
oops(). For 64 bit processes, disabled system register accesses are
currently treated as unhandled instructions.
This patch modifies entry.S to treat these unhandled traps as undefined
instructions, sending a SIGILL to userspace. This gives processes a
chance to handle this and stop using inaccessible registers, and
prevents further issues in the kernel as a result of the die().
Reported-by: Johannes Jensen <Johannes.Jensen@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The only reason uaccess routines might sleep
is if they fault. Make this explicit.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1369577426-26721-2-git-send-email-mst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently user faults (page, undefined instruction) are always reported
even though the user may have a signal handler for them. This patch adds
unhandled_signal() check together with printk_ratelimit() for these
cases.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we take an exception at EL1, we only want to enable debug
exceptions if we're not currently stepping, otherwise we can easily get
stuck in a loop stepping into interrupt handlers.
Unfortunately, the current code tests the wrong bit in the mdscr, so fix
that.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As per commit 764e0da1 (timers: Fixup the Kconfig consolidation
fallout), init/Kconfig already includes kernel/time/Kconfig, so no need
to do it explicitly for arm64.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The format of the lower 32-bits of the 64-bit operand to 'dc cisw' is
unchanged from ARMv7 architecture and the upper bits are RES0. This
implies that the 'way' field of the operand of 'dc cisw' occupies the
bit-positions [31 .. (32-A)]. Due to the use of 64-bit extended operands
to 'clz', the existing implementation of __flush_dcache_all is incorrectly
placing the 'way' field in the bit-positions [63 .. (64-A)].
Signed-off-by: Sukanto Ghosh <sghosh@apm.com>
Tested-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
The of_platform_populate() is currently invoked at device_initcall()
level. There are however drivers that use platform_driver_probe()
directly and they need the devices to be populated. This patch makes the
of_platform_populate() and arch_initcall().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Benoit Lecardonnel <Benoit.Lecardonnel@synopsys.com>
Tested-by: Benoit Lecardonnel <Benoit.Lecardonnel@synopsys.com>
During boot, we take the debug OS lock before interrupts are enabled.
This is required to prevent clearing of PSTATE.D on the interrupt entry
path, which could result in spurious debug exceptions before we've got
round to resetting things like the hardware breakpoints registers to a
sane state.
A problem with this approach is that taking the OS lock prevents an
external JTAG debugger from debugging the system, which is especially
irritating during boot, where JTAG debugging can be most useful.
This patch clears mdscr_el1 rather than taking the lock, clearing the
MDE and KDE bits and preventing self-hosted hardware debug exceptions
from occurring.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
When compiling with allmodconfig. early_console is already defined as an
extern global pointer. Need let it point to the object which we intend
to (like arm32 done).
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull stray syscall bits from Al Viro:
"Several syscall-related commits that were missing from the original"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE
unicore32: just use mmap_pgoff()...
unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE
x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)
GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid
cases for enableing GENERIC_GPIO without GPIOLIB, even though it is
possible to do so which has been causing confusion and breakage. This
branch does the work to completely eliminate GENERIC_GPIO.
However, it is not trivial to just create a branch to remove it. Over
the course of the v3.9 cycle more code referencing GENERIC_GPIO has been
added to linux-next that conflicts with this branch. The following must
be done to resolve the conflicts when merging this branch into mainline:
* "git grep CONFIG_GENERIC_GPIO" should return 0 hits. Matches should be
replaced with CONFIG_GPIOLIB
* "git grep '\bGENERIC_GPIO\b'" should return 1 hit in the Chinese
documentation.
* Selectors of GENERIC_GPIO should be turned into selectors of GPIOLIB
* definitions of the option in architecture Kconfig code should be deleted.
Stephen has 3 merge fixup patches[1] that do the above. They are currently
applicable on mainline as of May 2nd.
[1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg428056.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=xodc
-----END PGP SIGNATURE-----
Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux
Pull removal of GENERIC_GPIO from Grant Likely:
"GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any
valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
is possible to do so which has been causing confusion and breakage.
This branch does the work to completely eliminate GENERIC_GPIO."
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
gpio: update gpio Chinese documentation
Remove GENERIC_GPIO config option
Convert selectors of GENERIC_GPIO to GPIOLIB
blackfin: force use of gpiolib
m68k: coldfire: use gpiolib
mips: pnx833x: remove requirement for GENERIC_GPIO
openrisc: default GENERIC_GPIO to false
avr32: default GENERIC_GPIO to false
xtensa: remove explicit selection of GENERIC_GPIO
sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
powerpc: remove redundant GENERIC_GPIO selection
unicore32: default GENERIC_GPIO to false
unicore32: remove unneeded select GENERIC_GPIO
arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
arm: remove redundant GENERIC_GPIO selection
mips: alchemy: require gpiolib
mips: txx9: change GENERIC_GPIO to GPIOLIB
mips: loongson: use GPIO driver on CONFIG_GPIOLIB
mips: remove redundant GENERIC_GPIO select
specifics (the 'gic' branch merged), it can be enabled on arm64.
- Enable arm64 support for poweroff/restart (for code under
drivers/power/reset/).
- Fixes (dts file, exception handling, bitops)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=qd94
-----END PGP SIGNATURE-----
Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 update from Catalin Marinas:
- Since drivers/irqchip/irq-gic.c no longer has dependencies on arm32
specifics (the 'gic' branch merged), it can be enabled on arm64.
- Enable arm64 support for poweroff/restart (for code under
drivers/power/reset/).
- Fixes (dts file, exception handling, bitops)
* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: Treat the bitops index argument as an 'int'
arm64: Ignore the 'write' ESR flag on cache maintenance faults
arm64: dts: fix #address-cells for foundation-v8
arm64: vexpress: Add support for poweroff/restart
arm64: Enable support for the ARM GIC interrupt controller
The bitops prototype use an 'int' as the bit index type but the asm
implementation assume it to be a 'long'. Since the compiler does not
guarantee zeroing the upper 32-bits in a register when used as 'int',
change the bitops implementation accordingly.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ESR.WnR bit is always set on data cache maintenance faults even though
the page is not required to have write permission. If a translation
fault (page not yet mapped) happens for read-only user address range,
Linux incorrectly assumes a permission fault. This patch adds the check
of the ESR.CM bit during the page fault handling to ignore the 'write'
flag.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Tim Northover <Tim.Northover@arm.com>
Cc: stable@vger.kernel.org
Commit 90556ca1 ("arm64: vexpress: Add dts files for the ARMv8 RTSM
models") added foundation-v8.dts, but erroneously set
/cpus/#address-cells = <1> while providing two cells in each cpus/cpu@N
node's reg property.
As of commit ea393a2e ("arm64: smp: honour #address-size when parsing
CPU reg property") we read in as many address cells as specified rather
than always reading two. This means that for foundation-v8.dts, we only
read the first reg cell (zero) for each cpu node, and receive a lot of
warnings at boot of the form "/cpus/cpu@1: duplicate cpu reg properties
in the DT".
This patch corrects foundation-v8.dts to have the correct value for
/cpus/#address-cells.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds the arm_pm_poweroff definition expected by the
vexpress-poweroff.c driver and enables the latter for arm64.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
These are cleanups and smaller changes that either depend on earlier
feature branches or came in late during the development cycle.
We normally try to get all cleanups early, so these are the exceptions:
- A follow-up on the clocksource reworks, hopefully the last time
we need to merge clocksource subsystem changes through arm-soc.
A first set of patches was part of the original 3.10 arm-soc cleanup
series because of interdependencies with timer drivers now moved out
of arch/arm.
- Migrating the SPEAr13xx platform away from using auxdata for DMA
channel descriptions towards using information in device tree,
based on the earlier SPEAr multiplatform series
- A few follow-ups on the Atmel SAMA5 support and other changes
for Atmel at91 based on the larger at91 reworks.
- Moving the armada irqchip implementation to drivers/irqchip
- Several OMAP cleanups following up on the larger series already
merged in 3.10.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIVAwUAUYj5U2CrR//JCVInAQLNIRAAvsCtYOmXTxkRBxdtNEUUbkEjx71Se7q0
h9PR8vqlkbYwONkJ8a6j8pKq/WJDmLpHQWg/moBsvlGc6uEVBPBFhCWHs1+yGUzX
GhnJOaIKh3+651hIoXccS+/YZ16e1EAzdCM7+1QegPTldsRGkTOiwXgmR51kmPrz
6cZ8P5MFqMrWIy4XqWhOBbMDCY/An05IHMpniGIamUg2/uB921Z0wNFvDrnsg97u
DsVEwimyCJ0j7aO4TH+fkvsjoGWnIhxPtpaIm8iff6TPRI49deRb3zYpnIONm+oG
/cQrRf3BNW+aiTuRCTEjdBNGtcrYgN6CLWWjzgMhv1itSlX8swBcOhuNJRCGNQRI
v3wL4aEBxUpPGGL8erc2GIW7pe29YC2UEYI2z1X/5MEzYO589zkkG2k+/3HQVUwp
dnYpQxhjRMvh4mcodBJFRjzH1Z7agKUwtoKalAHRRH7r5gJDkpL3zLoMhYPTG5IZ
OwU+aYf+dDxh2kKW0zs8a/qL97UTHjlTRUC9LPoumvJ7LlKeDfzEn7DHUm2gggiu
dO9ye/NF/xEXoDXTl0Qp2wJ6/sbPSLyCYCIMdP/gJjWUiDDqqZ0VRaKL7vE/JWrd
NJ7k5yunX8/kRgfqgRFLDdFnPj1JeYHlmexsq4l9TPbPstoIcbw8u1v9sr8aZF+Z
agh9u4e7QU8=
=HWfp
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late cleanups from Arnd Bergmann:
"These are cleanups and smaller changes that either depend on earlier
feature branches or came in late during the development cycle. We
normally try to get all cleanups early, so these are the exceptions:
- A follow-up on the clocksource reworks, hopefully the last time we
need to merge clocksource subsystem changes through arm-soc.
A first set of patches was part of the original 3.10 arm-soc
cleanup series because of interdependencies with timer drivers now
moved out of arch/arm.
- Migrating the SPEAr13xx platform away from using auxdata for DMA
channel descriptions towards using information in device tree,
based on the earlier SPEAr multiplatform series
- A few follow-ups on the Atmel SAMA5 support and other changes for
Atmel at91 based on the larger at91 reworks.
- Moving the armada irqchip implementation to drivers/irqchip
- Several OMAP cleanups following up on the larger series already
merged in 3.10."
* tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
ARM: OMAP4: change the device names in usb_bind_phy
ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a
ARM: SPEAr: conditionalize SMP code
ARM: arch_timer: Silence debug preempt warnings
ARM: OMAP: remove unused variable
serial: amba-pl011: fix !CONFIG_DMA_ENGINE case
ata: arasan: remove the need for platform_data
ARM: at91/sama5d34ek.dts: remove not needed compatibility string
ARM: at91: dts: add MCI DMA support
ARM: at91: dts: add i2c dma support
ARM: at91: dts: set #dma-cells to the correct value
ARM: at91: suspend both memory controllers on at91sam9263
irqchip: armada-370-xp: slightly cleanup irq controller driver
irqchip: armada-370-xp: move IRQ handler to avoid forward declaration
irqchip: move IRQ driver for Armada 370/XP
ARM: mvebu: move L2 cache initialization in init_early()
devtree: add binding documentation for sp804
ARM: integrator-cp: convert use CLKSRC_OF for timer init
ARM: versatile: use OF init for sp804 timer
ARM: versatile: add versatile dtbs to dtbs target
...
Pull compat cleanup from Al Viro:
"Mostly about syscall wrappers this time; there will be another pile
with patches in the same general area from various people, but I'd
rather push those after both that and vfs.git pile are in."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
syscalls.h: slightly reduce the jungles of macros
get rid of union semop in sys_semctl(2) arguments
make do_mremap() static
sparc: no need to sign-extend in sync_file_range() wrapper
ppc compat wrappers for add_key(2) and request_key(2) are pointless
x86: trim sys_ia32.h
x86: sys32_kill and sys32_mprotect are pointless
get rid of compat_sys_semctl() and friends in case of ARCH_WANT_OLD_COMPAT_IPC
merge compat sys_ipc instances
consolidate compat lookup_dcookie()
convert vmsplice to COMPAT_SYSCALL_DEFINE
switch getrusage() to COMPAT_SYSCALL_DEFINE
switch epoll_pwait to COMPAT_SYSCALL_DEFINE
convert sendfile{,64} to COMPAT_SYSCALL_DEFINE
switch signalfd{,4}() to COMPAT_SYSCALL_DEFINE
make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protect
make HAVE_SYSCALL_WRAPPERS unconditional
consolidate cond_syscall and SYSCALL_ALIAS declarations
teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long
get rid of duplicate logics in __SC_....[1-6] definitions
show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms. This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.
show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.
* Archs which didn't print debug info now do.
alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
um, xtensa
* Already prints debug info. Replaced with show_regs_print_info().
The printed information is superset of what used to be there.
arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86
* s390 is special in that it used to print arch-specific information
along with generic debug info. Heiko and Martin think that the
arch-specific extra isn't worth keeping s390 specfic implementation.
Converted to use the generic version.
Note that now all archs print the debug info before actual register
dumps.
An example BUG() dump follows.
kernel BUG at /work/os/work/kernel/workqueue.c:4841!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
Hardware name: empty empty/S3992, BIOS 080011 10/26/2007
task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6
RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246
RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
Call Trace:
[<ffffffff81000312>] do_one_initcall+0x122/0x170
[<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8
[<ffffffff81c47760>] ? rest_init+0x140/0x140
[<ffffffff81c4776e>] kernel_init+0xe/0xf0
[<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0
[<ffffffff81c47760>] ? rest_init+0x140/0x140
...
v2: Typo fix in x86-32.
v3: CPU number dropped from show_regs_print_info() as
dump_stack_print_info() has been updated to print it. s390
specific implementation dropped as requested by s390 maintainers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile bits]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both dump_stack() and show_stack() are currently implemented by each
architecture. show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack(). On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.
The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().
There's no reason to require archs to implement two separate but mostly
identical functions. It leads to unnecessary subtle information.
This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin. Blackfin's
dump_stack() does something wonky that I don't understand.
Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information. This is used
in blackfin.
This patch brings the following behavior changes.
* On some archs, an extra level in backtrace for show_stack() could be
printed. This is because the top frame was determined in
dump_stack() on those archs while generic dump_stack() can't do that
reliably. It can be compensated by inlining dump_stack() but not
sure whether that'd be necessary.
* Most archs didn't use to print debug info on dump_stack(). They do
now.
An example WARN dump follows.
WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
Hardware name: empty
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
Call Trace:
[<ffffffff81c614dc>] dump_stack+0x19/0x1b
[<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20
[<ffffffff8234a071>] init_workqueues+0x35/0x505
...
v2: CPU number added to the generic debug info as requested by s390
folks and dropped the s390 specific dump_stack(). This loses %ksp
from the debug message which the maintainers think isn't important
enough to keep the s390-specific dump_stack() implementation.
dump_stack_print_info() is moved to kernel/printk.c from
lib/dump_stack.c. Because linkage is per objecct file,
dump_stack_print_info() living in the same lib file as generic
dump_stack() means that archs which implement custom dump_stack()
- at this point, only blackfin - can't use dump_stack_print_info()
as that will bring in the generic version of dump_stack() too. v1
The v1 patch broke build on blackfin due to this issue. The build
breakage was reported by Fengguang Wu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Versatile Express SoC (model) support - DT files and Kconfig entries
(there are no arch/arm64/mach-* directories). The bulk of the code has
already been moved to drivers/ as part of the ARM SoC clean-up.
- Basic multi-cluster support (CPU logical map initialised from the DT).
- Simple earlyprintk support for UART 8250/16550 and FastModel console
output.
- Optimised kernel library bitops and string functions.
- Automatic initialisation of the irqchip and clocks via DT.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=Uvte
-----END PGP SIGNATURE-----
Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 update from Catalin Marinas:
"Main features:
- Versatile Express SoC (model) support - DT files and Kconfig
entries (there are no arch/arm64/mach-* directories). The bulk of
the code has already been moved to drivers/ as part of the ARM SoC
clean-up.
- Basic multi-cluster support (CPU logical map initialised from the
DT)
- Simple earlyprintk support for UART 8250/16550 and FastModel
console output
- Optimised kernel library bitops and string functions.
- Automatic initialisation of the irqchip and clocks via DT"
* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (26 commits)
arm64: Use acquire/release semantics instead of explicit DMB
arm64: klib: bitops: fix unpredictable stxr usage
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support
arm64: vexpress: Add dts files for the ARMv8 RTSM models
arm64: Survive invalid cpu enable-methods
arm64: mm: Correct show_pte behaviour
arm64: Fix compat types affecting struct compat_stat
arm64: Execute DSB during thread switching for TLB/cache maintenance
arm64: compiling issue, need add include/asm/vga.h file
arm64: smp: honour #address-size when parsing CPU reg property
arm64: Define cmpxchg64 and cmpxchg64_local for outside use
arm64: Define readq and writeq for driver module using
arm64: Fix task tracing
arm64: add explicit symbols to ESR_EL1 decoding
arm64: Use irqchip_init() for interrupt controller initialisation
arm64: psci: Use the MPIDR values from cpu_logical_map for cpu ids.
arm64: klib: Optimised atomic bitops
arm64: klib: Optimised string functions
arm64: klib: Optimised memory functions
arm64: head: match all affinity levels in the pen of the secondaries
...
This patch changes the test_and_*_bit functions to use the
load-acquire/store-release instructions instead of explicit DMB.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We're currently relying on unpredictable behaviour in our testops
(test_and_*_bit), as stxr is unpredictable when the status register and
the source register are the same
This patch changes reallocates the status register so as to bring us back into
the realm of predictable behaviour. Boot tested on an AEMv8 model.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull SMP/hotplug changes from Ingo Molnar:
"This is a pretty large, multi-arch series unifying and generalizing
the various disjunct pieces of idle routines that architectures have
historically copied from each other and have grown in random, wildly
inconsistent and sometimes buggy directions:
101 files changed, 455 insertions(+), 1328 deletions(-)
this went through a number of review and test iterations before it was
committed, it was tested on various architectures, was exposed to
linux-next for quite some time - nevertheless it might cause problems
on architectures that don't read the mailing lists and don't regularly
test linux-next.
This cat herding excercise was motivated by the -rt kernel, and was
brought to you by Thomas "the Whip" Gleixner."
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
idle: Remove GENERIC_IDLE_LOOP config switch
um: Use generic idle loop
ia64: Make sure interrupts enabled when we "safe_halt()"
sparc: Use generic idle loop
idle: Remove unused ARCH_HAS_DEFAULT_IDLE
bfin: Fix typo in arch_cpu_idle()
xtensa: Use generic idle loop
x86: Use generic idle loop
unicore: Use generic idle loop
tile: Use generic idle loop
tile: Enter idle with preemption disabled
sh: Use generic idle loop
score: Use generic idle loop
s390: Use generic idle loop
powerpc: Use generic idle loop
parisc: Use generic idle loop
openrisc: Use generic idle loop
mn10300: Use generic idle loop
mips: Use generic idle loop
microblaze: Use generic idle loop
...
The sparse code, when asking the architecture to populate the vmemmap,
specifies the section range as a starting page and a number of pages.
This is an awkward interface, because none of the arch-specific code
actually thinks of the range in terms of 'struct page' units and always
translates it to bytes first.
In addition, later patches mix huge page and regular page backing for
the vmemmap. For this, they need to call vmemmap_populate_basepages()
on sub-section ranges with PAGE_SIZE and PMD_SIZE in mind. But these
are not necessarily multiples of the 'struct page' size and so this unit
is too coarse.
Just translate the section range into bytes once in the generic sparse
code, then pass byte ranges down the stack.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: David S. Miller <davem@davemloft.net>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use common help functions to free reserved pages.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the necessary Kconfig entries to enable support for the
ARMv8 software model (Versatile Express platform) together with the
defconfig update.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
This patch adds the DTS files for the ARMv8 RTSM and Foundation models.
Signed-off-by: Pawel Moll <Pawel.Moll@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Currently, if you pass the kernel a dtb where a cpu node has an
unsupported enable-method property (e.g. "not-psci"), it'll explode
horribly, as it iterates over the enable_ops array incorrectly. It
increments the pointer *at* the current element, rather than
incrementing the pointer *to* the current element. As the first two
elements pointed to structures that were contiguous in memory, this
happened to be equivalent. However the third element is NULL, so when
the list is exhausted, smp_get_enable_ops generates the wrong pointer,
and dereferences an arbitrary portion of memory, which currently happens
to contain zero.
This patch fixes this by indirecting the pointer one level, so we
iterate over the array elements correctly, avoiding the below panic:
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
show_pte makes use of the *_none_or_clear_bad style functions. If a
pgd, pud or pmd is identified as being bad, it will then be cleared.
As show_pte appears to be called from either the user or kernel
fault handlers this side effect can lead to unpredictable behaviour;
especially as TLB entries are not invalidated.
This patch removes the page table sanitisation from show_pte. If a
bad pgd, pud or pmd is encountered it is left unmodified.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The compat_stat structure doesn't match the arch/arm/ struct stat
definition. This patch fixes the compat types and struct compat_stat
definition accordingly.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
The DSB following TLB or cache maintenance ops must be run on the same
CPU. With kernel preemption enabled or for user-space cache maintenance
this may not be the case. This patch adds an explicit DSB in the
__switch_to() function.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For compiling with allmodconfig, need vga.h file, so generate it which
just only include the asm-generic one.
It is firstly used by drivers/gpu/drm/drm_irq.c.
The related error:
include/video/vga.h:22:21: fatal error: asm/vga.h: No such file or directory
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For systems where the top 32-bits of the MPIDR are all zero, we should
allow the device-tree to specify an #address-size of 0x1 for the CPU reg
property and then zero extend the value there.
Without this patch, kvmtool breaks with the recent mpidr parsing code
introduced in 4c7aa00213 ("arm64: kernel: initialise cpu_logical_map
from the DT").
Acked-by: Javi Merino <javi.merino@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Drivers use cmpxchg64, cmpxchg64_local to perform 64-bit operation, so
they can cross 32-bit and 64-bit platforms (it is a standard way).
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
when compiling with allmodconfig, CONFIG_64BIT=y the file
drivers/base/regmap/regmap-mmio.c will use readq and writeq so we need
implement these functions.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
the following changes:
- Add sched_clock selection logic to select the highest frequency clock
- Use full 64-bit arch timer counter for sched_clock
- Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and
adapt all users to use clocksource_of_init
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRZx0aAAoJEMhvYp4jgsXiB7MH/AutBUa40yuzTA1RzaDxYTX7
m1NrjmsTI8pFLX6VTvtwNXdT1AJ0JbzPxu35E1Y8xsu8tnx/RjG/hhqq8R2rXd5t
oqilT46SPBZpKBSrPSuEQde5v8XlKT5kEcUlg47bHGB1JrI9Ip14okRcg5aCJJzu
Pb25NqxTWS+vFTNV7C+UzuJ72lJ24FHQXK4AbZqaWcaokGCRLP1QE1s83jY7mpX7
zd5xWMPygKR8oYNPVhxoD1ajUo5cqVHtcXFRnWy1o/T/8ZPqCuSOsyJokScPHzwa
vUwoAn2OQSFLJZgITu8+9JSlLxW40BdMHaJ+jTlOXMGDq6RHZY1FHAy8PTf43wU=
=QjNu
-----END PGP SIGNATURE-----
Merge tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux into late/clksrc
This is the 2nd part of ARM timer clean-ups for 3.10. This series has
the following changes:
- Add sched_clock selection logic to select the highest frequency clock
- Use full 64-bit arch timer counter for sched_clock
- Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and
adapt all users to use clocksource_of_init
* tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux:
devtree: add binding documentation for sp804
ARM: integrator-cp: convert use CLKSRC_OF for timer init
ARM: versatile: use OF init for sp804 timer
ARM: versatile: add versatile dtbs to dtbs target
ARM: vexpress: remove extra timer-sp control register clearing
ARM: dts: vexpress: disable CA9 core tile sp804 timer
ARM: vexpress: remove sp804 OF init
ARM: highbank: use OF init for sp804 timer
ARM: timer-sp: convert to use CLKSRC_OF init
OF: add empty of_device_is_available for !OF
ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
ARM: make machine_desc->init_time default to clocksource_of_init
ARM: arch_timer: use full 64-bit counter for sched_clock
ARM: make sched_clock just call a function pointer
ARM: sched_clock: allow changing to higher frequency counter
Signed-off-by: Olof Johansson <olof@lixom.net>
This has a nasty set of conflicts with the exynos MCT code, which was
moved in a separate branch, and then fixed up when merged in, but still
conflicts a bit here. It should have been sorted out by this merge though.
For accurate accounting call contextidr_thread_switch before a
task is scheduled, rather than after, when the 'next' variable has a
different meaning since we switched the stacks.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ESR_EL1 decoding process is a bit cryptic, and KVM has also
a need for the same constants.
Add a new esr.h file containing the appropriate exception classes
constants, and change entry.S to use it. Fix a small bug in the
EL1 breakpoint check while we're at it.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code
and all driver code has been switch to depend on GPIOLIB. It is thus
safe to have GENERIC_GPIO removed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
This converts arm and arm64 to use CLKSRC_OF DT based initialization for
the arch timer. A new function arch_timer_arch_init is added to allow for
arch specific setup.
This has a side effect of enabling sched_clock on omap5 and exynos5. There
should not be any reason not to use the arch timers for sched_clock.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
This patch uses the generic irqchip_init() function for initialising the
interrupt controller on arm64. It also adds several definitions required
by the ARM GIC irqchip driver but does not enable ARM_GIC yet.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
With the (re)introduction of cpu_logical_map in arm64 we switch to
the use of MPIDR values to identify CPUs. Update the psci code to
do that.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The 'CONFIG_' prefix is not implicit in IS_ENABLED().
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch implements the AArch64-specific atomic bitops functions using
exclusive memory accesses to avoid locking.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch introduces AArch64-specific memory functions (memcpy,
memmove, memchr, memset). These functions are not optimised for any CPU
implementation but can be used as a starting point once hardware is
available.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The reg property of the cpu nodes in the DT now contains all the
affinity levels in (MPIDR[39:32] and MPIDR[23:0]) and that's what
boot_secondary() writes in the pen, so increase the mask in
secondary_holding_pen accordingly.
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When booting the kernel, the cpu logical id map must be initialised
using device tree data passed by FW or through an embedded blob.
This patch parses the reg property in device tree "cpu" nodes,
retrieves the corresponding CPUs hardware identifiers (MPIDR) and
initialises the cpu logical map accordingly.
The device tree HW identifiers are considered valid if all CPU nodes
contain a "reg" property, there are no duplicate "reg" entries and the
DT defines a CPU node whose "reg" property defines affinity levels
that matches those of the boot CPU.
The primary CPU is assigned cpu logical number 0 to keep the current
convention valid.
Based on a0ae024050 (ARM: kernel: add
device tree init map function).
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change the prototype of write_pen_release() accordingly and clarify
that's holding the hardware id of the secondary that's going to boot.
This is in preparation of getting HWIDs parsed from the DT.
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds support for using earlyprintk with 8250/16550 UART
ports. The 8250/16550 UART can either have 8-bit or 32-bit aligned
registers which is HW vendor dependent.
Kernel args for 8-bit aligned regs: earlyprintk=uart8250-8bit,<phys_address>
Kernel args for 32-bit aligned regs: earlyprintk=uart8250-32bit,<phys_address>
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enable early_printk to use the FastModel semihosting to output
the early kernel messages. Works both for host and guest kernels.
To use this feature, pass "early_printk=smh" to the kernel.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to preserve some kind of source compatibility between
arm and arm64, introduce read_cpuid_{implementor,part_number,mpidr}
which are used on KVM to find out which CPU we're running on.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Kconfig entry for DEBUG_ERRORS is a verbatim copy of the former arm
entry for that symbol. It got removed in v2.6.39 because it wasn't
actually used anywhere. There are still no users of DEBUG_ERRORS so
remove this entry too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
[catalin.marinas@arm.com: removed option from defconfig]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Config option GENERIC_HARDIRQS_NO_DEPRECATED was removed in commit
78c8982564 ("genirq: Remove the now obsolete
config options and select statements"), but the select was accidentally
reintroduced in commit 8c2c3df31e ("arm64:
Build infrastructure").
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The expression to compute the padding needed to fill the uc_sigmask field
to 1024 bits actually computes the padding needed for 1080 bits.
Fortunately, due to the 16-byte alignment of the following field
(uc_mcontext) the definition in glibc contains enough bytes of padding
after uc_sigmask so that the overall offsets and size match in both
definitions.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The __atomic_hash is only defined when SMP is enabled but the
arm64ksyms.c exports it even for the UP case.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull signal/compat fixes from Al Viro:
"Fixes for several regressions introduced in the last signal.git pile,
along with fixing bugs in truncate and ftruncate compat (on just about
anything biarch at least one of those two had been done wrong)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
compat: restore timerfd settime and gettime compat syscalls
[regression] braino in "sparc: convert to ksignal"
fix compat truncate/ftruncate
switch lseek to COMPAT_SYSCALL_DEFINE
lseek() and truncate() on sparc really need sign extension
This branch contains the usual set of individual driver improvements and
bug fixes, as well as updates to the core code. The more notable changes
include:
- Internally add new API for referencing GPIOs by gpio_desc instead of
number. Eventually this will become a public API
- ACPI GPIO binding support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=JN4M
-----END PGP SIGNATURE-----
Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux
Pull GPIO changes from Grant Likely:
"This branch contains the usual set of individual driver improvements
and bug fixes, as well as updates to the core code. The more notable
changes include:
- Internally add new API for referencing GPIOs by gpio_desc instead
of number. Eventually this will become a public API
- ACPI GPIO binding support"
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (33 commits)
arm64: select ARCH_WANT_OPTIONAL_GPIOLIB
gpio: em: Use irq_domain_add_simple() to fix runtime error
gpio: using common order: let 'static const' instead of 'const static'
gpio/vt8500: memory cleanup missing
gpiolib: Fix locking on gpio debugfs files
gpiolib: let gpio_chip reference its descriptors
gpiolib: use descriptors internally
gpiolib: use gpio_chips list in gpiochip_find_base
gpiolib: use gpio_chips list in sysfs ops
gpiolib: use gpio_chips list in gpiochip_find
gpiolib: use gpio_chips list in gpiolib_sysfs_init
gpiolib: link all gpio_chips using a list
gpio/langwell: cleanup driver
gpio/langwell: Add Cloverview ids to pci device table
gpio/lynxpoint: add chipset gpio driver.
gpiolib: add missing braces in gpio_direction_show
gpiolib-acpi: Fix error checks in interrupt requesting
gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
gpiolib: remove gpiochip_reserve()
arm: pxa: tosa: do not use gpiochip_reserve()
...
lockdep, but it's a mechanical change.
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJRJAcuAAoJENkgDmzRrbjxsw0P/3eXb+LddYnx0V0uHYdKpCUf
4vdW7X0fX3Z+aUK69IWRL/6ahoO4TpaHYGHBDjEoivyQ0GDq14X7JNWsYYt3LdMf
3wmDgRc2cn/mZOJbFeVpNV8ox5l/xc0CUvV+iQ8tMjfQItXMXgWUFZKMECsXKSO6
eex3lrw9M2jAX2uL8LQPp9W8xtKu24nSZRC6tH5riE/8fCzi1cZPPAqfxP5c8Lee
ZXtbCRSyAFENZLpKyMe1PC7HvtJyi5NDn9xwOQiXULZV/VOlvP94DGBLIKCM/6dn
4QvZxpG0P0uOlpCgRAVLyh/z7g4XY4VF/fHopLCmEcqLsvgD+V2LQpQ9zWUalLPC
Z+pUpz2vu0gIddPU1nR8R6oGpEdJ8O12aJle62p/RSXWZGx12qUQ+Tamu0tgKcv1
AsiJfbUGNDYfxgU6sHsoQjl2f68LTVckCU1C1LqEbW/S104EIORtGx30CHM4LRiO
32kDC5TtgYDBKQAIqJ4bL48ZMh+9W3uX40p7xzOI5khHQjvswUKa3jcxupU0C1uv
lx8KXo7pn8WT33QGysWC782wJCgJuzSc2vRn+KQoqoynuHGM6agaEtR59gil3QWO
rQEcxH63BBRDgHlg4FM9IkJwwsnC3PWKL8gbX0uAWXAPMbgapJkuuGZAwt0WDGVK
+GszxsFkCjlW0mK0egTb
=tiSY
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module update from Rusty Russell:
"The sweeping change is to make add_taint() explicitly indicate whether
to disable lockdep, but it's a mechanical change."
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
MODSIGN: Add option to not sign modules during modules_install
MODSIGN: Add -s <signature> option to sign-file
MODSIGN: Specify the hash algorithm on sign-file command line
MODSIGN: Simplify Makefile with a Kconfig helper
module: clean up load_module a little more.
modpost: Ignore ARC specific non-alloc sections
module: constify within_module_*
taint: add explicit flag to show whether lock dep is still OK.
module: printk message when module signature fail taints kernel.
Pull signal handling cleanups from Al Viro:
"This is the first pile; another one will come a bit later and will
contain SYSCALL_DEFINE-related patches.
- a bunch of signal-related syscalls (both native and compat)
unified.
- a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE
(fixing several potential problems with missing argument
validation, while we are at it)
- a lot of now-pointless wrappers killed
- a couple of architectures (cris and hexagon) forgot to save
altstack settings into sigframe, even though they used the
(uninitialized) values in sigreturn; fixed.
- microblaze fixes for delivery of multiple signals arriving at once
- saner set of helpers for signal delivery introduced, several
architectures switched to using those."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits)
x86: convert to ksignal
sparc: convert to ksignal
arm: switch to struct ksignal * passing
alpha: pass k_sigaction and siginfo_t using ksignal pointer
burying unused conditionals
make do_sigaltstack() static
arm64: switch to generic old sigaction() (compat-only)
arm64: switch to generic compat rt_sigaction()
arm64: switch compat to generic old sigsuspend
arm64: switch to generic compat rt_sigqueueinfo()
arm64: switch to generic compat rt_sigpending()
arm64: switch to generic compat rt_sigprocmask()
arm64: switch to generic sigaltstack
sparc: switch to generic old sigsuspend
sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE
sparc: kill sign-extending wrappers for native syscalls
kill sparc32_open()
sparc: switch to use of generic old sigaction
sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE
mips: switch to generic sys_fork() and sys_clone()
...
Introduce a new API vmemmap_free() to free and remove vmemmap
pagetables. Since pagetable implements are different, each architecture
has to provide its own version of vmemmap_free(), just like
vmemmap_populate().
Note: vmemmap_free() is not implemented for ia64, ppc, s390, and sparc.
[mhocko@suse.cz: fix implicit declaration of remove_pagetable]
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An architecture should not unconditionally enable 'GENERIC_GPIO'
without providing an implementation. In case of arm64, selecting
ARCH_WANT_OPTIONAL_GPIOLIB is the right solution, because it
lets us enable GPIOLIB when configuring the kernel, and that
implicitly turns on GENERIC_GPIO.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This contains parts of the ARM KVM support that have dependencies on
other patches merged through the arm-soc tree. In combination with
patches coming through Russell's tree, this will finally add full
support for the kernel based virtual machine on ARM, which has
been awaited for some time now.
Further, we now have a separate platform for virtual machines
and qemu booting that is used by both Xen and KVM, separating
these from the Versatile Express reference implementation.
Obviously, this new platform is multiplatform capable so it
can be combined with existing machines in the same kernel.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=u9F0
-----END PGP SIGNATURE-----
Merge tag 'virt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM virtualization changes:
"This contains parts of the ARM KVM support that have dependencies on
other patches merged through the arm-soc tree. In combination with
patches coming through Russell's tree, this will finally add full
support for the kernel based virtual machine on ARM, which has been
awaited for some time now.
Further, we now have a separate platform for virtual machines and qemu
booting that is used by both Xen and KVM, separating these from the
Versatile Express reference implementation. Obviously, this new
platform is multiplatform capable so it can be combined with existing
machines in the same kernel."
* tag 'virt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
ARM: arch_timer: include linux/errno.h
arm: arch_timer: add missing inline in stub function
ARM: KVM: arch_timers: Wire the init code and config option
ARM: KVM: arch_timers: Add timer world switch
ARM: KVM: arch_timers: Add guest timer core support
ARM: KVM: Add VGIC configuration option
ARM: KVM: VGIC initialisation code
ARM: KVM: VGIC control interface world switch
ARM: KVM: VGIC interrupt injection
ARM: KVM: vgic: retire queued, disabled interrupts
ARM: KVM: VGIC virtual CPU interface management
ARM: KVM: VGIC distributor handling
ARM: KVM: VGIC accept vcpu and dist base addresses from user space
ARM: KVM: Initial VGIC infrastructure code
ARM: KVM: Keep track of currently running vcpus
KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctl
ARM: gic: add __ASSEMBLY__ guard to C definitions
ARM: gic: define GICH offsets for VGIC support
ARM: gic: add missing distributor defintions
ARM: mach-virt: fixup machine descriptor after removal of sys_timer
...
interface).
- Simple earlyprintk support.
- Platform devices populated by default from the DT (SoC-agnostic).
- CONTEXTIDR support (used by external trace tools).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=2prj
-----END PGP SIGNATURE-----
Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 patches from Catalin Marinas:
- SMP support for the PSCI booting protocol (power state coordination
interface).
- Simple earlyprintk support.
- Platform devices populated by default from the DT (SoC-agnostic).
- CONTEXTIDR support (used by external trace tools).
* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: mm: update CONTEXTIDR register to contain PID of current process
arm64: atomics: fix grossly inconsistent asm constraints for exclusives
arm64: compat: use compat_uptr_t type for compat_ucontext.uc_link
arm64: Select ARCH_WANT_FRAME_POINTERS
arm64: Add kvm_para.h and xor.h generic headers
arm64: SMP: enable PSCI boot method
arm64: psci: add support for PSCI invocations from the kernel
arm64: SMP: rework the SMP code to be enabling method agnostic
arm64: perf: add guest vs host discrimination
arm64: add COMPAT_PSR_*_BIT flags
arm64: Add simple earlyprintk support
arm64: Populate the platform devices
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from
Rafael J. Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng
with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and
Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri
with contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from
Dirk Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King,
Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei,
Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo,
Thomas Renninger, and Yasuaki Ishimatsu.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=wijn
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from Rafael
J Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from Dirk
Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
Ishimatsu.
* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
PM idle: remove global declaration of pm_idle
unicore32 idle: delete stray pm_idle comment
openrisc idle: delete pm_idle
mn10300 idle: delete pm_idle
microblaze idle: delete pm_idle
m32r idle: delete pm_idle, and other dead idle code
ia64 idle: delete pm_idle
cris idle: delete idle and pm_idle
ARM64 idle: delete pm_idle
ARM idle: delete pm_idle
blackfin idle: delete pm_idle
sparc idle: rename pm_idle to sparc_idle
sh idle: rename global pm_idle to static sh_idle
x86 idle: rename global pm_idle to static x86_idle
APM idle: register apm_cpu_idle via cpuidle
cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
cpufreq / intel_pstate: Change to disallow module build
tools/power turbostat: display SMI count by default
intel_idle: export both C1 and C1E
ACPI / hotplug: Fix concurrency issues and memory leaks
...
Pull irq core changes from Ingo Molnar:
"The biggest changes are the IRQ-work and printk changes from Frederic
Weisbecker, which prepare the code for 'full dynticks' (the ability to
stop or slow down the periodic tick arbitrarily, not just in idle time
as today):
- Don't stop tick with irq works pending. This fix is generally
useful and concerns archs that can't raise self IPIs.
- Flush irq works before CPU offlining.
- Introduce "lazy" irq works that can wait for the next tick to be
executed, unless it's stopped.
- Implement klogd wake up using irq work. This removes the ad-hoc
printk_tick()/printk_needs_cpu() hooks and make it working even in
dynticks mode.
- Cleanups and fixes."
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Export enable/disable_percpu_irq()
arch Kconfig: Remove references to IRQ_PER_CPU
irq_work: Remove return value from the irq_work_queue() function
genirq: Avoid deadlock in spurious handling
printk: Wake up klogd using irq_work
irq_work: Make self-IPIs optable
irq_work: Warn if there's still work on cpu_down
irq_work: Flush work on CPU_DYING
irq_work: Don't stop the tick with pending works
nohz: Add API to check tick state
irq_work: Remove CONFIG_HAVE_IRQ_WORK
irq_work: Fix racy check on work pending flag
irq_work: Fix racy IRQ_WORK_BUSY flag setting
pm_idle() on arm64 was a synonym for default_idle(),
so remove it and invoke default_idle() directly.
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
__ARCH_WANT_SYS_RT_SIGACTION,
__ARCH_WANT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore
CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} -
can be assumed always set.
This patch is a port of 575320d62 ("ARM: 7445/1: mm: update CONTEXTIDR
register to contain PID of current process") from ARM that introduces a
new Kconfig option which, when enabled, causes the kernel to write the
PID of the current task into the CONTEXTIDR register on context switch.
This is useful when analysing hardware trace, since writes to this
register can be configured to emit an event into the trace stream.
Signed-off-by: Will Deacon <will.deacon@arm.com>
[catalin.marinas@arm.com: contextidr_thread_switch() moved to mmu_context.h]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Our uses of inline asm constraints for atomic operations are fairly
wild and varied. We basically need to guarantee the following:
1. Any instructions with barrier implications
(load-acquire/store-release) have a "memory" clobber
2. When performing exclusive accesses, the addresing mode is generated
using the "Q" constraint
3. Atomic blocks which use the condition flags, have a "cc" clobber
This patch addresses these concerns which, as well as fixing the
semantics of the code, stops GCC complaining about impossible asm
constraints.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
struct compat_ucontext * is a 64-bit pointer, so we need to use a
compat_uptr_t instead to avoid declaring a structure incompatible with
what AArch32 userspace expects.
Cc: <stable@vger.kernel.org>
Reported-by: Edmund Grimley-Evans <Edmund.Grimley-Evans@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arch_timer driver supports a superset of the functionality of the
arm_generic driver, and is not tied to a particular arch.
This patch moves arm64 to use the arch_timer driver, gaining additional
functionality in doing so, and removes the (now unused) arm_generic
driver. Timer-related hooks specific to arm64 are moved into
arch/arm64/kernel/time.c.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Currently arch_counter_get_cnt{p,v}ct can be speculated, allowing for
stale time values to be read. This could be problematic for the delay
loop and other sensitive functions, as the time delta could jump around
unexpectedly.
This patch adds isbs to arch_counter_get_cnt{p,v}ct, preventing this
possibility.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Wire the PSCI implementation into the SMP secondary startup
code.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds support for the Power State Coordination Interface
defined by ARM, allowing Linux to request CPU-centric power-management
operations from firmware implementing the PSCI protocol.
Signed-off-by: Will Deacon <will.deacon@arm.com>
[Marc: s/u32/u64/ in the relevant spots, and switch from an initcall
to an simpler init function]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to introduce PSCI support, let the SMP code handle
multiple enabling methods. This also allow CPUs to be booted
using different methods (though this feels a bit weird...).
In the process, move the spin-table code to its own file.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add minimal guest support to perf, so it can distinguish whether
the PMU interrupt was in the host or the guest, as well as collecting
some very basic information (guest PC, user vs kernel mode).
This is not feature complete though, as it doesn't support backtracing
in the guest.
Based on the x86 implementation, tested with KVM/arm64.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to mess with the processor state when running 32bit
guests, define all the AArch32 PSR flags.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds support for "earlyprintk=" parameter on the kernel
command line. The format is:
earlyprintk=<name>[,<addr>][,<options>]
where <name> is the name of the (UART) device, e.g. "pl011", <addr> is
the I/O address. The <options> aren't currently used.
The mapping of the earlyprintk device is done very early during kernel
boot and there are restrictions on which functions it can call. A
special early_io_map() function is added which creates the mapping from
the pre-defined EARLY_IOBASE to the device I/O address passed via the
kernel parameter. The pgd entry corresponding to EARLY_IOBASE is
pre-populated in head.S during kernel boot.
Only PL011 is currently supported and it is assumed that the interface
is already initialised by the boot loader before the kernel is started.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
This patch add a device_initcall() to populate the platform devices
(of_default_bus_match_table). This allows SoC implementations that do
not require earlier initcalls to avoid any platform-specific code under
arch/arm64.
GIC and generic timer initialisation is done via FDT and CPU notifiers
independently of the SoC code.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The kernel's internal definition of ELF_NGREG uses struct pt_regs, which
means that we disagree with userspace on the size of coredumps since
glibc correctly uses the user-visible struct user_pt_regs.
This patch fixes our ELF_NGREG definition to use struct user_pt_regs
and introduces our own ELF_CORE_COPY_REGS to convert between the user
and kernel structure definitions.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There have been a number of new syscalls introduced to arch/arm/ since
the compat layer was implemented for arm64, so add pointers to the
relevant functions to the compat syscall table.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't
contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to
$(targets) to prevent *.dtb from always being rebuilt. Note
This fixes a regression introduced by the .dtb rule rework in da4cbc6
"arm64: use new common dtc rule", although since arm64 doesn't actually
have any *.dts yet, this isn't a critical issue.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
This is mostly a port of dbf62d5006 ("ARM: mm: introduce L_PTE_VALID
for page table entries") and 26ffd0d43b ("ARM: mm: introduce present,
faulting entries for PAGE_NONE") from ARM, which makes use of present,
faulting page table entries for page table entries mapped as PROT_NONE.
The main difference with this implementation is that we can make use of
the two pte type bits in order to avoid allocating a software bit for
identifying PROT_NONE pages, instead reserving the 10b suffix for these
types of mappings.
This is required to prevent users from accessing such pages via syscalls
such as read/write over a pipe.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marking non-present ptes as read-only can corrupt file ptes, breaking
things like swap and file mappings.
This patch ensures that we only manipulate user pte bits when the pte
is marked present.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch is an arm64 version of ce73ec6db4 ("powerpc/vdso: Remove
redundant locking in update_vsyscall_tz()").
Timezone data is not protected, so the sequence counter is not required
to ensure consistency. Furthermore, having multiple paths updating the
counter leads to a race between update_vsyscall and update_vsyscall_tz,
so remove the timezone sequence counting from both the kernel and the
vdso.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This fixes up all of the smaller arches that had __dev* markings for
their platform-specific drivers.
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Myron Stowe <myron.stowe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Jan Glauber <jang@linux.vnet.ibm.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9b064fc3f9 (new helper:
compat_user_stack_pointer()) introduces a call to current_pt_regs()
which is defined in linux/ptrace.h, not currently included asm/compat.h.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull signal handling cleanups from Al Viro:
"sigaltstack infrastructure + conversion for x86, alpha and um,
COMPAT_SYSCALL_DEFINE infrastructure.
Note that there are several conflicts between "unify
SS_ONSTACK/SS_DISABLE definitions" and UAPI patches in mainline;
resolution is trivial - just remove definitions of SS_ONSTACK and
SS_DISABLED from arch/*/uapi/asm/signal.h; they are all identical and
include/uapi/linux/signal.h contains the unified variant."
Fixed up conflicts as per Al.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
alpha: switch to generic sigaltstack
new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those
generic compat_sys_sigaltstack()
introduce generic sys_sigaltstack(), switch x86 and um to it
new helper: compat_user_stack_pointer()
new helper: restore_altstack()
unify SS_ONSTACK/SS_DISABLE definitions
new helper: current_user_stack_pointer()
missing user_stack_pointer() instances
Bury the conditionals from kernel_thread/kernel_execve series
COMPAT_SYSCALL_DEFINE: infrastructure
A few new features this merge-window. The most important one is
probably, that dma-debug now warns if a dma-handle is not checked with
dma_mapping_error by the device driver. This requires minor changes to
some architectures which make use of dma-debug. Most of these changes
have the respective Acks by the Arch-Maintainers.
Besides that there are updates to the AMD IOMMU driver for refactor the
IOMMU-Groups support and to make sure it does not trigger a hardware
erratum.
The OMAP changes (for which I pulled in a branch from Tony Lindgren's
tree) have a conflict in linux-next with the arm-soc tree. The conflict
is in the file arch/arm/mach-omap2/clock44xx_data.c which is deleted in
the arm-soc tree. It is safe to delete the file too so solve the
conflict. Similar changes are done in the arm-soc tree in the common
clock framework migration. A missing hunk from the patch in the IOMMU
tree will be submitted as a seperate patch when the merge-window is
closed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=pPHZ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"A few new features this merge-window. The most important one is
probably, that dma-debug now warns if a dma-handle is not checked with
dma_mapping_error by the device driver. This requires minor changes
to some architectures which make use of dma-debug. Most of these
changes have the respective Acks by the Arch-Maintainers.
Besides that there are updates to the AMD IOMMU driver for refactor
the IOMMU-Groups support and to make sure it does not trigger a
hardware erratum.
The OMAP changes (for which I pulled in a branch from Tony Lindgren's
tree) have a conflict in linux-next with the arm-soc tree. The
conflict is in the file arch/arm/mach-omap2/clock44xx_data.c which is
deleted in the arm-soc tree. It is safe to delete the file too so
solve the conflict. Similar changes are done in the arm-soc tree in
the common clock framework migration. A missing hunk from the patch
in the IOMMU tree will be submitted as a seperate patch when the
merge-window is closed."
* tag 'iommu-updates-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (29 commits)
ARM: dma-mapping: support debug_dma_mapping_error
ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks
iommu/omap: Adapt to runtime pm
iommu/omap: Migrate to hwmod framework
iommu/omap: Keep mmu enabled when requested
iommu/omap: Remove redundant clock handling on ISR
iommu/amd: Remove obsolete comment
iommu/amd: Don't use 512GB pages
iommu/tegra: smmu: Move bus_set_iommu after probe for multi arch
iommu/tegra: gart: Move bus_set_iommu after probe for multi arch
iommu/tegra: smmu: Remove unnecessary PTC/TLB flush all
tile: dma_debug: add debug_dma_mapping_error support
sh: dma_debug: add debug_dma_mapping_error support
powerpc: dma_debug: add debug_dma_mapping_error support
mips: dma_debug: add debug_dma_mapping_error support
microblaze: dma-mapping: support debug_dma_mapping_error
ia64: dma_debug: add debug_dma_mapping_error support
c6x: dma_debug: add debug_dma_mapping_error support
ARM64: dma_debug: add debug_dma_mapping_error support
intel-iommu: Prevent devices with RMRRs from being placed into SI Domain
...
Compat counterpart of current_user_stack_pointer(); for most of the biarch
architectures those two are identical, but e.g. arm64 and arm use different
registers for stack pointer...
Note that amd64 variants of current_user_stack_pointer/compat_user_stack_pointer
do *not* rely on pt_regs having been through FIXUP_TOP_OF_STACK.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
