Commit Graph

825980 Commits

Author SHA1 Message Date
Jonathan Lemon
9c69a13205 route: Avoid crash from dereferencing NULL rt->from
When __ip6_rt_update_pmtu() is called, rt->from is RCU dereferenced, but is
never checked for null - rt6_flush_exceptions() may have removed the entry.

[ 1913.989004] RIP: 0010:ip6_rt_cache_alloc+0x13/0x170
[ 1914.209410] Call Trace:
[ 1914.214798]  <IRQ>
[ 1914.219226]  __ip6_rt_update_pmtu+0xb0/0x190
[ 1914.228649]  ip6_tnl_xmit+0x2c2/0x970 [ip6_tunnel]
[ 1914.239223]  ? ip6_tnl_parse_tlv_enc_lim+0x32/0x1a0 [ip6_tunnel]
[ 1914.252489]  ? __gre6_xmit+0x148/0x530 [ip6_gre]
[ 1914.262678]  ip6gre_tunnel_xmit+0x17e/0x3c7 [ip6_gre]
[ 1914.273831]  dev_hard_start_xmit+0x8d/0x1f0
[ 1914.283061]  sch_direct_xmit+0xfa/0x230
[ 1914.291521]  __qdisc_run+0x154/0x4b0
[ 1914.299407]  net_tx_action+0x10e/0x1f0
[ 1914.307678]  __do_softirq+0xca/0x297
[ 1914.315567]  irq_exit+0x96/0xa0
[ 1914.322494]  smp_apic_timer_interrupt+0x68/0x130
[ 1914.332683]  apic_timer_interrupt+0xf/0x20
[ 1914.341721]  </IRQ>

Fixes: a68886a691 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15 13:31:59 -07:00
Lukas Bulwahn
789445b960 MAINTAINERS: normalize Woojung Huh's email address
MAINTAINERS contains a lower-case and upper-case variant of
Woojung Huh' s email address.

Only keep the lower-case variant in MAINTAINERS.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15 13:25:03 -07:00
Sabrina Dubroca
92480b3977 bonding: fix event handling for stacked bonds
When a bond is enslaved to another bond, bond_netdev_event() only
handles the event as if the bond is a master, and skips treating the
bond as a slave.

This leads to a refcount leak on the slave, since we don't remove the
adjacency to its master and the master holds a reference on the slave.

Reproducer:
  ip link add bondL type bond
  ip link add bondU type bond
  ip link set bondL master bondU
  ip link del bondL

No "Fixes:" tag, this code is older than git history.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15 13:22:09 -07:00
Wang Hai
8ed633b9ba Revert "net-sysfs: Fix memory leak in netdev_register_kobject"
This reverts commit 6b70fc94af.

The reverted bugfix will cause another issue.
Reported by syzbot+6024817a931b2830bc93@syzkaller.appspotmail.com.
See https://syzkaller.appspot.com/x/log.txt?x=1737671b200000 for
details.

Signed-off-by: Wang Hai <wanghai26@huawei.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15 13:10:27 -07:00
David S. Miller
a44acf9060 wireless-drivers fixes for 5.1
Second set of fixes for 5.1.
 
 iwlwifi
 
 * add some new PCI IDs (plus a struct name change they depend on)
 
 * fix crypto with new devices, namely 22560 and above
 
 * fix for a potential deadlock in the TX path
 
 * a fix for offloaded rate-control
 
 * support new PCI HW IDs which use a new FW
 
 mt76
 
 * fix lock initialisation and a possible deadlock
 
 * aggregation fixes
 
 rt2x00
 
 * fix sequence numbering during retransmits
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJctIf2AAoJEG4XJFUm622bm4UH/RjizpPno79+PxKgZFxhYcWJ
 4sBW1hDwcO4FNKLX3tf6WR4N/vxkPEWSbB1gGRbHAIeYeb74ab5hYQoCVaOnU8GL
 uzhjgGVHwUnBi0oluuG12gpU9Zf6raV4Ec9HdRszx1A8DOa0qn5lUrXwWbF3GlZZ
 BU4ojdOZOVQx+yqE+xIr7okcbBpxRZgLK7KthKWgR4G9RlISIsfMYAHE1fwPmPr8
 b7fwqAKkgJ5fGSxez1tv7hlYaRw2zVwFYrVv3TegRKMl1pHTI/ps3ip37JTwv+O0
 lv5112AgEO2cSPT/R0wWqEkZ21Rc/AeFbttcQ9Ejw1SPc/w2d+fX8pTY5/RPw8w=
 =RCyH
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-for-davem-2019-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 5.1

Second set of fixes for 5.1.

iwlwifi

* add some new PCI IDs (plus a struct name change they depend on)

* fix crypto with new devices, namely 22560 and above

* fix for a potential deadlock in the TX path

* a fix for offloaded rate-control

* support new PCI HW IDs which use a new FW

mt76

* fix lock initialisation and a possible deadlock

* aggregation fixes

rt2x00

* fix sequence numbering during retransmits
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15 12:02:29 -07:00
David S. Miller
7324880182 mlx5-fixes-2019-04-09
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcrPOfAAoJEEg/ir3gV/o+c1sIAIuVUmF95OK6BxrNxQ31HN7i
 0V/OW29V6B5musqyGXVa90nl9wJ9BE2tmtHsg2HPABXdGdiYhNRP7Tm+aq+QYBe3
 8kJVk5U+HCLeHvf9k3dpJZokMzAgEhuWAbuAE1YelYUtbOXO9Zrj2uTL1NHJTYyc
 SNOg9+gATOMsOAuiUyygN0XMoYESTsUE7UH4tuhyYr44cKR85qOQDPAlcDEHGTfO
 uHWwmOznZqFVJUVyfwtEkTojsxNiW+QA2PR5faX/+eI7746qXOAzYq2JSjtNEyTz
 4xB9a+t47xpGDw4Svwu51pDw+4Uiiy1Yv0kOKKpBqrCk892bZ8l1gWcHRgjYx/8=
 =9wkB
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-fixes-2019-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-04-09

This series provides some fixes to mlx5 driver.

I've cc'ed some of the checksum fixes to Eric Dumazet and i would like to get
his feedback before you pull.

For -stable v4.19
('net/mlx5: FPGA, tls, idr remove on flow delete')
('net/mlx5: FPGA, tls, hold rcu read lock a bit longer')

For -stable v4.20
('net/mlx5e: Rx, Check ip headers sanity')
('Revert "net/mlx5e: Enable reporting checksum unnecessary also for L3 packets"')
('net/mlx5e: Rx, Fixup skb checksum for packets with tail padding')

For -stable v5.0
('net/mlx5e: Switch to Toeplitz RSS hash by default')
('net/mlx5e: Protect against non-uplink representor for encap')
('net/mlx5e: XDP, Avoid checksum complete when XDP prog is loaded')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14 15:07:30 -07:00
Eric Dumazet
69f23a09da rtnetlink: fix rtnl_valid_stats_req() nlmsg_len check
Jakub forgot to either use nlmsg_len() or nlmsg_msg_size(),
allowing KMSAN to detect a possible uninit-value in rtnl_stats_get

BUG: KMSAN: uninit-value in rtnl_stats_get+0x6d9/0x11d0 net/core/rtnetlink.c:4997
CPU: 0 PID: 10428 Comm: syz-executor034 Not tainted 5.1.0-rc2+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x131/0x2a0 mm/kmsan/kmsan.c:619
 __msan_warning+0x7a/0xf0 mm/kmsan/kmsan_instr.c:310
 rtnl_stats_get+0x6d9/0x11d0 net/core/rtnetlink.c:4997
 rtnetlink_rcv_msg+0x115b/0x1550 net/core/rtnetlink.c:5192
 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2485
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5210
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1925
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg net/socket.c:632 [inline]
 ___sys_sendmsg+0xdb3/0x1220 net/socket.c:2137
 __sys_sendmsg net/socket.c:2175 [inline]
 __do_sys_sendmsg net/socket.c:2184 [inline]
 __se_sys_sendmsg+0x305/0x460 net/socket.c:2182
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2182
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Fixes: 51bc860d4a ("rtnetlink: stats: validate attributes in get as well as dumps")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14 14:10:08 -07:00
David S. Miller
a6b16d8d2a Merge branch 'qed-doorbell-overflow-recovery'
Denis Bolotin says:

====================
qed: Fix the Doorbell Overflow Recovery mechanism

This patch series fixes and improves the doorbell recovery mechanism.
The main goals of this series are to fix missing attentions from the
doorbells block (DORQ) or not handling them properly, and execute the
recovery from periodic handler instead of the attention handler.

Please consider applying the series to net.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14 13:59:49 -07:00
Denis Bolotin
0d72c2ac89 qed: Fix the DORQ's attentions handling
Separate the overflow handling from the hardware interrupt status analysis.
The interrupt status is a single register and is common for all PFs. The
first PF reading the register is not necessarily the one who overflowed.
All PFs must check their overflow status on every attention.
In this change we clear the sticky indication in the attention handler to
allow doorbells to be processed again as soon as possible, but running
the doorbell recovery is scheduled for the periodic handler to reduce the
time spent in the attention handler.
Checking the need for DORQ flush was changed to "db_bar_no_edpm" because
qed_edpm_enabled()'s result could change dynamically and might have
prevented a needed flush.

Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14 13:59:49 -07:00
Denis Bolotin
d4476b8a61 qed: Fix missing DORQ attentions
When the DORQ (doorbell block) is overflowed, all PFs get attentions at the
same time. If one PF finished handling the attention before another PF even
started, the second PF might miss the DORQ's attention bit and not handle
the attention at all.
If the DORQ attention is missed and the issue is not resolved, another
attention will not be sent, therefore each attention is treated as a
potential DORQ attention.
As a result, the attention callback is called more frequently so the debug
print was moved to reduce its quantity.
The number of periodic doorbell recovery handler schedules was reduced
because it was the previous way to mitigating the missed attention issue.

Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14 13:59:49 -07:00
Denis Bolotin
b61b04ad81 qed: Fix the doorbell address sanity check
Fix the condition which verifies that doorbell address is inside the
doorbell bar by checking that the end of the address is within range
as well.

Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14 13:59:49 -07:00
Denis Bolotin
9ac6bb1414 qed: Delete redundant doorbell recovery types
DB_REC_DRY_RUN (running doorbell recovery without sending doorbells) is
never used. DB_REC_ONCE (send a single doorbell from the doorbell recovery)
is not needed anymore because by running the periodic handler we make sure
we check the overflow status later instead.
This patch is needed because in the next patches, the only doorbell
recovery type being used is DB_REC_REAL_DEAL, and the fixes are much
cleaner without this enum.

Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14 13:59:48 -07:00
Eric Dumazet
c543cb4a5f ipv4: ensure rcu_read_lock() in ipv4_link_failure()
fib_compute_spec_dst() needs to be called under rcu protection.

syzbot reported :

WARNING: suspicious RCU usage
5.1.0-rc4+ #165 Not tainted
include/linux/inetdevice.h:220 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by swapper/0/0:
 #0: 0000000051b67925 ((&n->timer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:170 [inline]
 #0: 0000000051b67925 ((&n->timer)){+.-.}, at: call_timer_fn+0xda/0x720 kernel/time/timer.c:1315

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-rc4+ #165
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5162
 __in_dev_get_rcu include/linux/inetdevice.h:220 [inline]
 fib_compute_spec_dst+0xbbd/0x1030 net/ipv4/fib_frontend.c:294
 spec_dst_fill net/ipv4/ip_options.c:245 [inline]
 __ip_options_compile+0x15a7/0x1a10 net/ipv4/ip_options.c:343
 ipv4_link_failure+0x172/0x400 net/ipv4/route.c:1195
 dst_link_failure include/net/dst.h:427 [inline]
 arp_error_report+0xd1/0x1c0 net/ipv4/arp.c:297
 neigh_invalidate+0x24b/0x570 net/core/neighbour.c:995
 neigh_timer_handler+0xc35/0xf30 net/core/neighbour.c:1081
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:374 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:414
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807

Fixes: ed0de45a10 ("ipv4: recompile ip options in ipv4_link_failure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14 13:43:17 -07:00
Stephen Suryaputra
ed0de45a10 ipv4: recompile ip options in ipv4_link_failure
Recompile IP options since IPCB may not be valid anymore when
ipv4_link_failure is called from arp_error_report.

Refer to the commit 3da1ed7ac3 ("net: avoid use IPCB in cipso_v4_error")
and the commit before that (9ef6b42ad6) for a similar issue.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:23:46 -07:00
David S. Miller
9e550f0153 Merge branch 'rxrpc-fixes'
David Howells says:

====================
rxrpc: Fixes

Here is a collection of fixes for rxrpc:

 (1) rxrpc_error_report() needs to call sock_error() to clear the error
     code from the UDP transport socket, lest it be unexpectedly revisited
     on the next kernel_sendmsg() call.  This has been causing all sorts of
     weird effects in AFS as the effects have typically been felt by the
     wrong RxRPC call.

 (2) Allow a kernel user of AF_RXRPC to easily detect if an rxrpc call has
     completed.

 (3) Allow errors incurred by attempting to transmit data through the UDP
     socket to get back up the stack to AFS.

 (4) Make AFS use (2) to abort the synchronous-mode call waiting loop if
     the rxrpc-level call completed.

 (5) Add a missing tracepoint case for tracing abort reception.

 (6) Fix detection and handling of out-of-order ACKs.

====================

Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Jeffrey Altman
1a2391c30c rxrpc: Fix detection of out of order acks
The rxrpc packet serial number cannot be safely used to compute out of
order ack packets for several reasons:

 1. The allocation of serial numbers cannot be assumed to imply the order
    by which acks are populated and transmitted.  In some rxrpc
    implementations, delayed acks and ping acks are transmitted
    asynchronously to the receipt of data packets and so may be transmitted
    out of order.  As a result, they can race with idle acks.

 2. Serial numbers are allocated by the rxrpc connection and not the call
    and as such may wrap independently if multiple channels are in use.

In any case, what matters is whether the ack packet provides new
information relating to the bounds of the window (the firstPacket and
previousPacket in the ACK data).

Fix this by discarding packets that appear to wind back the window bounds
rather than on serial number procession.

Fixes: 298bc15b20 ("rxrpc: Only take the rwind and mtu values from latest ACK")
Signed-off-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
David Howells
39ce675575 rxrpc: Trace received connection aborts
Trace received calls that are aborted due to a connection abort, typically
because of authentication failure.  Without this, connection aborts don't
show up in the trace log.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Marc Dionne
f7f1dd3162 afs: Check for rxrpc call completion in wait loop
Check the state of the rxrpc call backing an afs call in each iteration of
the call wait loop in case the rxrpc call has already been terminated at
the rxrpc layer.

Interrupt the wait loop and mark the afs call as complete if the rxrpc
layer call is complete.

There were cases where rxrpc errors were not passed up to afs, which could
result in this loop waiting forever for an afs call to transition to
AFS_CALL_COMPLETE while the rx call was already complete.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Marc Dionne
8e8715aaa9 rxrpc: Allow errors to be returned from rxrpc_queue_packet()
Change rxrpc_queue_packet()'s signature so that it can return any error
code it may encounter when trying to send the packet.

This allows the caller to eventually do something in case of error - though
it should be noted that the packet has been queued and a resend is
scheduled.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Marc Dionne
4611da30d6 rxrpc: Make rxrpc_kernel_check_life() indicate if call completed
Make rxrpc_kernel_check_life() pass back the life counter through the
argument list and return true if the call has not yet completed.

Suggested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Marc Dionne
56d282d9db rxrpc: Clear socket error
When an ICMP or ICMPV6 error is received, the error will be attached
to the socket (sk_err) and the report function will get called.
Clear any pending error here by calling sock_error().

This would cause the following attempt to use the socket to fail with
the error code stored by the ICMP error, resulting in unexpected errors
with various side effects depending on the context.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Colin Ian King
1dc2b3d655 qede: fix write to free'd pointer error and double free of ptp
The err2 error return path calls qede_ptp_disable that cleans up
on an error and frees ptp. After this, the free'd ptp is dereferenced
when ptp->clock is set to NULL and the code falls-through to error
path err1 that frees ptp again.

Fix this by calling qede_ptp_disable and exiting via an error
return path that does not set ptp->clock or kfree ptp.

Addresses-Coverity: ("Write to pointer after free")
Fixes: 035744975a ("qede: Add support for PTP resource locking.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:55:47 -07:00
Colin Ian King
0a2c34f18c vxge: fix return of a free'd memblock on a failed dma mapping
Currently if a pci dma mapping failure is detected a free'd
memblock address is returned rather than a NULL (that indicates
an error). Fix this by ensuring NULL is returned on this error case.

Addresses-Coverity: ("Use after free")
Fixes: 528f727279 ("vxge: code cleanup and reorganization")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:54:41 -07:00
Kalle Valo
832bc250d7 Second batch of iwlwifi fixes intended for v5.1
* fix for a potential deadlock in the TX path;
 * a fix for offloaded rate-control;
 * support new PCI HW IDs which use a new FW;
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAlyka8EACgkQoUecoho8
 xfqbpg//dTiEkkB5vMeUYfsgyO4JdCmzCQg7ZYh7FfRtxP8EnRCD4CSQJHmU0K/G
 /K+cRn7nA06STbvshtmGQRJ9KJ8nLJ4wt1cZMXSi6O2bH6jdwKpBE6hCq71Kw99d
 zWns40Db3JFKE4/+OIRVAo1bdThjLquxrponGAr0CC7PzAo1BdG1ux34PlXev0Av
 n7rk/sLqPH/sfEOuVVU6WBNkhAAy0vSUfcZ2FOMuebx9Qkap7VFwSxGyuJI0mdPZ
 wQiAg4aCVUnbxscQB2ag82wMWui5HLtgdCh5aCgZNsCkWodr6iZXL32uhg8v09LZ
 yYnPWtyztm4t4InzeF3dmBfT/aKMeYn5C/tmi3oSIU0swUJdBeTuqYzKcuon4Ths
 +DJob2Gq8q1PEC6kSVfcJ7xZDt6bawfFdM9MwOSYYk2AYhyaPfSTud7w44NkqpKk
 fnfJHmFskYcz4pqld8/kjSHMTr/fZCRn3jDBaPoNZpJpZaPQ3y1jymyQ8/9d9OKM
 f44TDDMkRUw1rOiHm3IZQZiMXaUgY8ZHFF7z6sITwogPJVXSqG8d+kLfo0WBVk1B
 Bt/8ApuuyRm52CZPE+lYLP9rINdoMJFmOHA73sj6/RXWNYJ4QWzqzM4Fgld3ZuIh
 nldyeSWO/uFmlKcydT1wBNTqi63zn2PWIC0ejlwqDJ9L0KCSgMc=
 =EfCY
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-for-kalle-2019-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes

Second batch of iwlwifi fixes intended for v5.1

* fix for a potential deadlock in the TX path;
* a fix for offloaded rate-control;
* support new PCI HW IDs which use a new FW;
2019-04-12 21:34:27 +03:00
Stanislaw Gruszka
bafdf85dfa mt76x02: avoid status_list.lock and sta->rate_ctrl_lock dependency
Move ieee80211_tx_status_ext() outside of status_list lock section
in order to avoid locking dependency and possible deadlock reposed by
LOCKDEP in below warning.

Also do mt76_tx_status_lock() just before it's needed.

[  440.224832] WARNING: possible circular locking dependency detected
[  440.224833] 5.1.0-rc2+ #22 Not tainted
[  440.224834] ------------------------------------------------------
[  440.224835] kworker/u16:28/2362 is trying to acquire lock:
[  440.224836] 0000000089b8cacf (&(&q->lock)->rlock#2){+.-.}, at: mt76_wake_tx_queue+0x4c/0xb0 [mt76]
[  440.224842]
               but task is already holding lock:
[  440.224842] 000000002cfedc59 (&(&sta->lock)->rlock){+.-.}, at: ieee80211_stop_tx_ba_cb+0x32/0x1f0 [mac80211]
[  440.224863]
               which lock already depends on the new lock.

[  440.224863]
               the existing dependency chain (in reverse order) is:
[  440.224864]
               -> #3 (&(&sta->lock)->rlock){+.-.}:
[  440.224869]        _raw_spin_lock_bh+0x34/0x40
[  440.224880]        ieee80211_start_tx_ba_session+0xe4/0x3d0 [mac80211]
[  440.224894]        minstrel_ht_get_rate+0x45c/0x510 [mac80211]
[  440.224906]        rate_control_get_rate+0xc1/0x140 [mac80211]
[  440.224918]        ieee80211_tx_h_rate_ctrl+0x195/0x3c0 [mac80211]
[  440.224930]        ieee80211_xmit_fast+0x26d/0xa50 [mac80211]
[  440.224942]        __ieee80211_subif_start_xmit+0xfc/0x310 [mac80211]
[  440.224954]        ieee80211_subif_start_xmit+0x38/0x390 [mac80211]
[  440.224956]        dev_hard_start_xmit+0xb8/0x300
[  440.224957]        __dev_queue_xmit+0x7d4/0xbb0
[  440.224968]        ip6_finish_output2+0x246/0x860 [ipv6]
[  440.224978]        mld_sendpack+0x1bd/0x360 [ipv6]
[  440.224987]        mld_ifc_timer_expire+0x1a4/0x2f0 [ipv6]
[  440.224989]        call_timer_fn+0x89/0x2a0
[  440.224990]        run_timer_softirq+0x1bd/0x4d0
[  440.224992]        __do_softirq+0xdb/0x47c
[  440.224994]        irq_exit+0xfa/0x100
[  440.224996]        smp_apic_timer_interrupt+0x9a/0x220
[  440.224997]        apic_timer_interrupt+0xf/0x20
[  440.224999]        cpuidle_enter_state+0xc1/0x470
[  440.225000]        do_idle+0x21a/0x260
[  440.225001]        cpu_startup_entry+0x19/0x20
[  440.225004]        start_secondary+0x135/0x170
[  440.225006]        secondary_startup_64+0xa4/0xb0
[  440.225007]
               -> #2 (&(&sta->rate_ctrl_lock)->rlock){+.-.}:
[  440.225009]        _raw_spin_lock_bh+0x34/0x40
[  440.225022]        rate_control_tx_status+0x4f/0xb0 [mac80211]
[  440.225031]        ieee80211_tx_status_ext+0x142/0x1a0 [mac80211]
[  440.225035]        mt76x02_send_tx_status+0x2e4/0x340 [mt76x02_lib]
[  440.225037]        mt76x02_tx_status_data+0x31/0x40 [mt76x02_lib]
[  440.225040]        mt76u_tx_status_data+0x51/0xa0 [mt76_usb]
[  440.225042]        process_one_work+0x237/0x5d0
[  440.225043]        worker_thread+0x3c/0x390
[  440.225045]        kthread+0x11d/0x140
[  440.225046]        ret_from_fork+0x3a/0x50
[  440.225047]
               -> #1 (&(&list->lock)->rlock#8){+.-.}:
[  440.225049]        _raw_spin_lock_bh+0x34/0x40
[  440.225052]        mt76_tx_status_skb_add+0x51/0x100 [mt76]
[  440.225054]        mt76x02u_tx_prepare_skb+0xbd/0x116 [mt76x02_usb]
[  440.225056]        mt76u_tx_queue_skb+0x5f/0x180 [mt76_usb]
[  440.225058]        mt76_tx+0x93/0x190 [mt76]
[  440.225070]        ieee80211_tx_frags+0x148/0x210 [mac80211]
[  440.225081]        __ieee80211_tx+0x75/0x1b0 [mac80211]
[  440.225092]        ieee80211_tx+0xde/0x110 [mac80211]
[  440.225105]        __ieee80211_tx_skb_tid_band+0x72/0x90 [mac80211]
[  440.225122]        ieee80211_send_auth+0x1f3/0x360 [mac80211]
[  440.225141]        ieee80211_auth.cold.40+0x6c/0x100 [mac80211]
[  440.225156]        ieee80211_mgd_auth.cold.50+0x132/0x15f [mac80211]
[  440.225171]        cfg80211_mlme_auth+0x149/0x360 [cfg80211]
[  440.225181]        nl80211_authenticate+0x273/0x2e0 [cfg80211]
[  440.225183]        genl_family_rcv_msg+0x196/0x3a0
[  440.225184]        genl_rcv_msg+0x47/0x8e
[  440.225185]        netlink_rcv_skb+0x3a/0xf0
[  440.225187]        genl_rcv+0x24/0x40
[  440.225188]        netlink_unicast+0x16d/0x210
[  440.225189]        netlink_sendmsg+0x204/0x3b0
[  440.225191]        sock_sendmsg+0x36/0x40
[  440.225193]        ___sys_sendmsg+0x259/0x2b0
[  440.225194]        __sys_sendmsg+0x47/0x80
[  440.225196]        do_syscall_64+0x60/0x1f0
[  440.225197]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  440.225198]
               -> #0 (&(&q->lock)->rlock#2){+.-.}:
[  440.225200]        lock_acquire+0xb9/0x1a0
[  440.225202]        _raw_spin_lock_bh+0x34/0x40
[  440.225204]        mt76_wake_tx_queue+0x4c/0xb0 [mt76]
[  440.225215]        ieee80211_agg_start_txq+0xe8/0x2b0 [mac80211]
[  440.225225]        ieee80211_stop_tx_ba_cb+0xb8/0x1f0 [mac80211]
[  440.225235]        ieee80211_ba_session_work+0x1c1/0x2f0 [mac80211]
[  440.225236]        process_one_work+0x237/0x5d0
[  440.225237]        worker_thread+0x3c/0x390
[  440.225239]        kthread+0x11d/0x140
[  440.225240]        ret_from_fork+0x3a/0x50
[  440.225240]
               other info that might help us debug this:

[  440.225241] Chain exists of:
                 &(&q->lock)->rlock#2 --> &(&sta->rate_ctrl_lock)->rlock --> &(&sta->lock)->rlock

[  440.225243]  Possible unsafe locking scenario:

[  440.225244]        CPU0                    CPU1
[  440.225244]        ----                    ----
[  440.225245]   lock(&(&sta->lock)->rlock);
[  440.225245]                                lock(&(&sta->rate_ctrl_lock)->rlock);
[  440.225246]                                lock(&(&sta->lock)->rlock);
[  440.225247]   lock(&(&q->lock)->rlock#2);
[  440.225248]
                *** DEADLOCK ***

[  440.225249] 5 locks held by kworker/u16:28/2362:
[  440.225250]  #0: 0000000048fcd291 ((wq_completion)phy0){+.+.}, at: process_one_work+0x1b5/0x5d0
[  440.225252]  #1: 00000000f1c6828f ((work_completion)(&sta->ampdu_mlme.work)){+.+.}, at: process_one_work+0x1b5/0x5d0
[  440.225254]  #2: 00000000433d2b2c (&sta->ampdu_mlme.mtx){+.+.}, at: ieee80211_ba_session_work+0x5c/0x2f0 [mac80211]
[  440.225265]  #3: 000000002cfedc59 (&(&sta->lock)->rlock){+.-.}, at: ieee80211_stop_tx_ba_cb+0x32/0x1f0 [mac80211]
[  440.225276]  #4: 000000009d7b9a44 (rcu_read_lock){....}, at: ieee80211_agg_start_txq+0x33/0x2b0 [mac80211]
[  440.225286]
               stack backtrace:
[  440.225288] CPU: 2 PID: 2362 Comm: kworker/u16:28 Not tainted 5.1.0-rc2+ #22
[  440.225289] Hardware name: LENOVO 20KGS23S0P/20KGS23S0P, BIOS N23ET55W (1.30 ) 08/31/2018
[  440.225300] Workqueue: phy0 ieee80211_ba_session_work [mac80211]
[  440.225301] Call Trace:
[  440.225304]  dump_stack+0x85/0xc0
[  440.225306]  print_circular_bug.isra.38.cold.58+0x15c/0x195
[  440.225307]  check_prev_add.constprop.48+0x5f0/0xc00
[  440.225309]  ? check_prev_add.constprop.48+0x39d/0xc00
[  440.225311]  ? __lock_acquire+0x41d/0x1100
[  440.225312]  __lock_acquire+0xd98/0x1100
[  440.225313]  ? __lock_acquire+0x41d/0x1100
[  440.225315]  lock_acquire+0xb9/0x1a0
[  440.225317]  ? mt76_wake_tx_queue+0x4c/0xb0 [mt76]
[  440.225319]  _raw_spin_lock_bh+0x34/0x40
[  440.225321]  ? mt76_wake_tx_queue+0x4c/0xb0 [mt76]
[  440.225323]  mt76_wake_tx_queue+0x4c/0xb0 [mt76]
[  440.225334]  ieee80211_agg_start_txq+0xe8/0x2b0 [mac80211]
[  440.225344]  ieee80211_stop_tx_ba_cb+0xb8/0x1f0 [mac80211]
[  440.225354]  ieee80211_ba_session_work+0x1c1/0x2f0 [mac80211]
[  440.225356]  process_one_work+0x237/0x5d0
[  440.225358]  worker_thread+0x3c/0x390
[  440.225359]  ? wq_calc_node_cpumask+0x70/0x70
[  440.225360]  kthread+0x11d/0x140
[  440.225362]  ? kthread_create_on_node+0x40/0x40
[  440.225363]  ret_from_fork+0x3a/0x50

Cc: stable@vger.kernel.org
Fixes: 88046b2c9f ("mt76: add support for reporting tx status with skb")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-12 21:32:40 +03:00
Vijayakumar Durai
746ba11f17 rt2x00: do not increment sequence number while re-transmitting
Currently rt2x00 devices retransmit the management frames with
incremented sequence number if hardware is assigning the sequence.

This is HW bug fixed already for non-QOS data frames, but it should
be fixed for management frames except beacon.

Without fix retransmitted frames have wrong SN:

 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1648, FN=0, Flags=........C Frame is not being retransmitted 1648 1
 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1649, FN=0, Flags=....R...C Frame is being retransmitted 1649 1
 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1650, FN=0, Flags=....R...C Frame is being retransmitted 1650 1

With the fix SN stays correctly the same:

 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=........C
 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C
 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C

Cc: stable@vger.kernel.org
Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
[sgruszka: simplify code, change comments and changelog]
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-12 21:31:07 +03:00
Felix Fietkau
9dc27bcbe7 mt76: mt7603: send BAR after powersave wakeup
Now that the sequence number allocation is fixed, we can finally send a BAR
at powersave wakeup time to refresh the receiver side reorder window

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-12 21:28:26 +03:00
Felix Fietkau
aa3cb24be1 mt76: mt7603: fix sequence number assignment
If the MT_TXD3_SN_VALID flag is not set in the tx descriptor, the hardware
assigns the sequence number. However, the rest of the code assumes that the
sequence number specified in the 802.11 header gets transmitted.
This was causing issues with the aggregation setup, which worked for the
initial one (where the sequence numbers were still close), but not for
further teardown/re-establishing of sessions.

Additionally, the overwrite of the TID sequence number in WTBL2 was resetting
the hardware assigned sequence numbers, causing them to drift further apart.

Fix this by using the software assigned sequence numbers

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-12 21:28:26 +03:00
Felix Fietkau
2170e2157d mt76: mt7603: add missing initialization for dev->ps_lock
Fixes lockdep complaint and a potential race condition

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-12 21:28:25 +03:00
Tetsuo Handa
bddc028a4f udpv6: Check address length before reading address family
KMSAN will complain if valid address length passed to udpv6_pre_connect()
is shorter than sizeof("struct sockaddr"->sa_family) bytes.

(This patch is bogus if it is guaranteed that udpv6_pre_connect() is
always called after checking "struct sockaddr"->sa_family. In that case,
we want a comment why we don't need to check valid address length here.)

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 10:25:03 -07:00
Tetsuo Handa
ba024f2574 bpf: Check address length before reading address family
KMSAN will complain if valid address length passed to bpf_bind() is
shorter than sizeof("struct sockaddr"->sa_family) bytes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 10:25:03 -07:00
Tetsuo Handa
c68e747d0a llc: Check address length before reading address field
KMSAN will complain if valid address length passed to bind() is shorter
than sizeof(struct sockaddr_llc) bytes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 10:25:03 -07:00
Tetsuo Handa
bd7d46ddca Bluetooth: Check address length before reading address field
KMSAN will complain if valid address length passed to bind() is shorter
than sizeof(struct sockaddr_sco) bytes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 10:25:03 -07:00
Tetsuo Handa
a9107a14a9 rxrpc: Check address length before reading srx_service field
KMSAN will complain if valid address length passed to bind() is shorter
than sizeof(struct sockaddr_rxrpc) bytes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 10:25:03 -07:00
Tetsuo Handa
d852be8477 net: netlink: Check address length before reading groups field
KMSAN will complain if valid address length passed to bind() is shorter
than sizeof(struct sockaddr_nl) bytes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 10:25:03 -07:00
Tetsuo Handa
175f7c1f01 sctp: Check address length before reading address family
KMSAN will complain if valid address length passed to connect() is shorter
than sizeof("struct sockaddr"->sa_family) bytes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 10:25:03 -07:00
Tetsuo Handa
238ffdc49e mISDN: Check address length before reading address family
KMSAN will complain if valid address length passed to bind() is shorter
than sizeof("struct sockaddr_mISDN"->family) bytes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 10:25:03 -07:00
Tetsuo Handa
dd3ac9a684 net/rds: Check address length before reading address family
syzbot is reporting uninitialized value at rds_connect() [1] and
rds_bind() [2]. This is because syzbot is passing ulen == 0 whereas
these functions expect that it is safe to access sockaddr->family field
in order to determine minimal address length for validation.

[1] https://syzkaller.appspot.com/bug?id=f4e61c010416c1e6f0fa3ffe247561b60a50ad71
[2] https://syzkaller.appspot.com/bug?id=a4bf9e41b7e055c3823fdcd83e8c58ca7270e38f

Reported-by: syzbot <syzbot+0049bebbf3042dbd2e8f@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+915c9f99f3dbc4bd6cd1@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 10:25:03 -07:00
Eric Dumazet
e305845096 dctcp: more accurate tracking of packets delivery
After commit e21db6f69a ("tcp: track total bytes delivered with ECN CE marks")
core TCP stack does a very good job tracking ECN signals.

The "sender's best estimate of CE information" Yuchung mentioned in his
patch is indeed the best we can do.

DCTCP can use tp->delivered_ce and tp->delivered to not duplicate the logic,
and use the existing best estimate.

This solves some problems, since current DCTCP logic does not deal with losses
and/or GRO or ack aggregation very well.

This also removes a dubious use of inet_csk(sk)->icsk_ack.rcv_mss
(this should have been tp->mss_cache), and a 64 bit divide.

Finally, we can see that the DCTCP logic, calling dctcp_update_alpha() for
every ACK could be done differently, calling it only once per RTT.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Abdul Kabbani <akabbani@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 21:31:03 -07:00
David Ahern
a5f622984a selftests: fib_tests: Fix 'Command line is not complete' errors
A couple of tests are verifying a route has been removed. The helper
expects the prefix as the first part of the expected output. When
checking that a route has been deleted the prefix is empty leading
to an invalid ip command:

  $ ip ro ls match
  Command line is not complete. Try option "help"

Fix by moving the comparison of expected output and output to a new
function that is used by both check_route and check_route6. Use the
new helper for the 2 checks on route removal.

Also, remove the reset of 'set -x' in route_setup which overrides the
user managed setting.

Fixes: d69faad765 ("selftests: fib_tests: Add prefix route tests with metric")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:17:59 -07:00
YueHaibing
d3706566ae net: netrom: Fix error cleanup path of nr_proto_init
Syzkaller report this:

BUG: unable to handle kernel paging request at fffffbfff830524b
PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0
Oops: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23
Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2
RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282
RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4
RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258
RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269
R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250
R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830
FS:  00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 __list_add include/linux/list.h:60 [inline]
 list_add include/linux/list.h:79 [inline]
 proto_register+0x444/0x8f0 net/core/sock.c:3375
 nr_proto_init+0x73/0x4b3 [netrom]
 ? 0xffffffffc1628000
 ? 0xffffffffc1628000
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004
Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan
 bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc]
Dumping ftrace buffer:
   (ftrace buffer empty)
CR2: fffffbfff830524b
---[ end trace 039ab24b305c4b19 ]---

If nr_proto_init failed, it may forget to call proto_unregister,
tiggering this issue.This patch rearrange code of nr_proto_init
to avoid such issues.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 13:59:49 -07:00
Andy Duan
d7c3a206e6 net: fec: manage ahb clock in runtime pm
Some SOC like i.MX6SX clock have some limits:
- ahb clock should be disabled before ipg.
- ahb and ipg clocks are required for MAC MII bus.
So, move the ahb clock to runtime management together with
ipg clock.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 13:53:28 -07:00
Nikolay Aleksandrov
c5b493ce19 net: bridge: multicast: use rcu to access port list from br_multicast_start_querier
br_multicast_start_querier() walks over the port list but it can be
called from a timer with only multicast_lock held which doesn't protect
the port list, so use RCU to walk over it.

Fixes: c83b8fab06 ("bridge: Restart queries when last querier expires")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 11:13:51 -07:00
David S. Miller
9a4dda81f1 Merge branch 'thunderx-xdp-mtu'
Matteo Croce says:

====================
Fix thunderx MTU with XDP

The thunderx driver can't use XDP with all MTU values.
This patches sets the right MTU values, and add a check to avoid setting
a wrong value which will not function.

v3: Fix a copy-paste from two functions, tested on proper hardware:

2: enP2p1s0v0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether 1c:1b:0d:0d:52:a4 brd ff:ff:ff:ff:ff:ff
[  787.019730] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1800.
RTNETLINK answers: Operation not supported
[  800.574568] nicvf 0002:01:00.1 enP2p1s0v0: Link is Up 10000 Mbps Full duplex
[  807.248321] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1500.
RTNETLINK answers: Invalid argument
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 11:10:34 -07:00
Matteo Croce
1f227d1608 net: thunderx: don't allow jumbo frames with XDP
The thunderx driver forbids to load an eBPF program if the MTU is too high,
but this can be circumvented by loading the eBPF, then raising the MTU.

Fix this by limiting the MTU if an eBPF program is already loaded.

Fixes: 05c773f52b ("net: thunderx: Add basic XDP support")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 11:10:34 -07:00
Matteo Croce
5ee15c101f net: thunderx: raise XDP MTU to 1508
The thunderx driver splits frames bigger than 1530 bytes to multiple
pages, making impossible to run an eBPF program on it.
This leads to a maximum MTU of 1508 if QinQ is in use.

The thunderx driver forbids to load an eBPF program if the MTU is higher
than 1500 bytes. Raise the limit to 1508 so it is possible to use L2
protocols which need some more headroom.

Fixes: 05c773f52b ("net: thunderx: Add basic XDP support")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 11:10:34 -07:00
David S. Miller
796fff0c12 Merge branch 'smc-fixes'
Ursula Braun says:

====================
net/smc: fixes 2019-04-11

here are some fixes in different areas of the smc code for the net
tree.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 11:04:08 -07:00
Ursula Braun
f61bca58f6 net/smc: move unhash before release of clcsock
Commit <26d92e951fe0>
("net/smc: move unhash as early as possible in smc_release()")
fixes one occurrence in the smc code, but the same pattern exists
in other places. This patch covers the remaining occurrences and
makes sure, the unhash operation is done before the smc->clcsock is
released. This avoids a potential use-after-free in smc_diag_dump().

Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 11:04:08 -07:00
Karsten Graul
8ef659f1a8 net/smc: fix return code from FLUSH command
The FLUSH command is used to empty the pnet table. No return code is
expected from the command. Commit a9d8b0b1e3d6 added namespace support
for the pnet table and changed the FLUSH command processing to call
smc_pnet_remove_by_pnetid() to remove the pnet entries. This function
returns -ENOENT when no entry was deleted, which is now the return code
of the FLUSH command. As a result the FLUSH command will return an error
when the pnet table is already empty.
Restore the expected behavior and let FLUSH always return 0.

Fixes: a9d8b0b1e3d6 ("net/smc: add pnet table namespace support")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 11:04:08 -07:00
Ursula Braun
07603b2308 net/smc: propagate file from SMC to TCP socket
fcntl(fd, F_SETOWN, getpid()) selects the recipient of SIGURG signals
that are delivered when out-of-band data arrives on socket fd.
If an SMC socket program makes use of such an fcntl() call, it fails
in case of fallback to TCP-mode. In case of fallback the traffic is
processed with the internal TCP socket. Propagating field "file" from the
SMC socket to the internal TCP socket fixes the issue.

Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 11:04:08 -07:00