This driver handles two different Sharp sensors that have been
proposed for merging to the mainline kernel over the years, and
already has a limited proximity-only driver in the input
subsystem.
These components are completely different from the confusingly
similarly named Sharp GP2AP020A00F, for which we have a driver
in drivers/iio/light/gp2ap020a00f.c
The two components GP2AP002A00F and GP2AP002S00F are
distinctively different but similar: they share the same set of
registers but differ slightly in the I2C protocol.
Instead of the approach by the previous input driver, we create
a combined IIO proximity and light sensor driver.
The plan is to merge this driver and delete the input driver.
The pieces for the driver are picked all over the place after
researching and grepping through a few different vendor trees
and driver submissions.
We merge it under the light sensors because:
- It has similarities with the Capella CM3605 light sensor and
proximity driver which is there.
- It is related to the GP2AP020A00F driver which is also there.
This driver was tested with the Samsung GT-S7710 mobile phone
which has the GP2AP002S00F proximity sensor mounted.
The suspend/resume cycle will disable the interrupt from the
sensor. If someone would desire to use this interrupt for
wakeup, the driver will need modifications.
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Jonathan Bakker <xc-racer2@live.ca>
Cc: Oskar Andero <oskar.andero@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds device tree bindings for the GP2AP002 light
and proximity sensor.
As with other early proximity sensors (~2010) the light
sensor and proximity sensors were combined into a single
component.
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Jonathan Bakker <xc-racer2@live.ca>
Cc: Oskar Andero <oskar.andero@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
odr to odr_table
gain to fs_table
'gain' is actually in 'st_lsm6dsx_fs' structure of 'fs_table'
Signed-off-by: JieunKim <jieun.kim4758@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use st_sensors_dev_name_probe() instead open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the STM32 ADC binding to DT schema format using json-schema
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It's been over 6 months, and no one has noticed that these drivers are
deleted, probably because no one actually has this hardware. As no one
has volunteered to maintain the code, let's drop it for good.
Link: https://lore.kernel.org/r/20200210231417.GA1736729@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor handling of P2P specific action frames. Make use of 'struct' to
handle the P2P frames instead of manipulating using 'buf' pointer.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200212154503.8835-1-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few places where a service's reference count is incremented,
something quick is done, and the refcount is dropped. This can be made
a little simpler/faster by not grabbing a reference in these cases.
Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com>
Link: https://lore.kernel.org/r/ac6186ac888f1acf489b5b504efcba8b0d6a8b25.1581532523.git.marcgonzalez@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently reference counts are implemented by locking service_spinlock
and then incrementing the service's ->ref_count field, calling
kfree() when the last reference has been dropped. But at the same
time, there's code in multiple places that dereferences pointers
to services without having a reference, so there could be a race there.
It should be possible to avoid taking any lock in unlock_service()
or service_release() because we are setting a single array element
to NULL, and on service creation, a mutex is locked before looking
for a NULL spot to put the new service in.
Using a struct kref and RCU-delaying the freeing of services fixes
this race condition while still making it possible to skip
grabbing a reference in many places. Also it avoids the need to
acquire a single spinlock when e.g. taking a reference on
state->services[i] when somebody else is in the middle of taking
a reference on state->services[j].
Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com>
Link: https://lore.kernel.org/r/3bf6f1ec6ace64d7072025505e165b8dd18b25ca.1581532523.git.marcgonzalez@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix three checkpatch.pl warnings of 'quoted string split across lines'
in gasket_core.c by merging the strings in one line.
Though some strings
are over 80 characters long, fixing this warning is necessary to ease
grep-ing the source for printk.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200212175826.GA5967@kaaira-HP-Pavilion-Notebook
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200211211219.GA673@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200211211722.GA1640@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes "WARNING: Missing a blank line after
declarations" generated from checkpatch.pl by adding
a blank line after declarations.
Signed-off-by: Mohana Datta Yelugoti <ymdatta.work@gmail.com>
Link: https://lore.kernel.org/r/20200211095813.11426-1-ymdatta.work@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'priv' handler is already present in 'vif' struct so directly fetch
its value from vif handler in wilc_handle_roc_expired().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200211152802.6096-2-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the use of vendor specific IE parameter to decide
p2p_GO/p2p_Client roles between two 'wilc' device. Previously p2p group
formation between two 'wilc' device make use of vendor IE for roles
decision. The role is decided based on the 'go_intent' value.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200211152802.6096-1-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lockdep is complaining about recursive locking, because it can't make
a difference between locked skb_queues. Annotate nested locks and avoid
double bh_disable/enable.
[...]
insmod/815 is trying to acquire lock:
cb7d6418 (&(&list->lock)->rlock){+...}, at: wfx_tx_queues_clear+0xfc/0x198 [wfx]
but task is already holding lock:
cb7d61f4 (&(&list->lock)->rlock){+...}, at: wfx_tx_queues_clear+0xa0/0x198 [wfx]
[...]
Possible unsafe locking scenario:
CPU0
----
lock(&(&list->lock)->rlock);
lock(&(&list->lock)->rlock);
Cc: stable@vger.kernel.org
Fixes: 9bca45f3d6 ("staging: wfx: allow to send 802.11 frames")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/5e30397af95854b4a7deea073b730c00229f42ba.1581416843.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current code races in init/exit with interrupt handlers. This is noticed
by the warning below. Fix it by using devres for ordering allocations and
IRQ de/registration.
WARNING: CPU: 0 PID: 827 at drivers/staging/wfx/bus_spi.c:142 wfx_spi_irq_handler+0x5c/0x64 [wfx]
race condition in driver init/deinit
Cc: stable@vger.kernel.org
Fixes: 0096214a59 ("staging: wfx: add support for I/O access")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/f0c66cbb3110c2736cd4357c753fba8c14ee3aee.1581416843.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/wfx/queue.c: In function wfx_tx_queues_get:
drivers/staging/wfx/queue.c:484:28: warning: variable tx_priv set but not used [-Wunused-but-set-variable]
commit 2e57865e79 ("staging: wfx: pspoll_mask make no sense")
left behind this unused variable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200211140334.55248-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the local variable pnetdev in rtw_alloc_etherdev_with_old_priv
to avoid hungarian notation and clear the last checkpatch warning in
the file osdep_service.c.
rtl8188eu/os_dep/osdep_service.c:32: WARNING: line over 80 characters
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200210200830.22868-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do not currently provide routing information for NI PCIe-6251 and
PCI-6259 boards, but they are functionally identical to the PCI-6251 and
PCI-6259 boards and can share their routing information. (This has been
confirmed for the PCIe-6251 by Éric Piel, using the "NI MAX" software
for Windows. It is hoped that it applies to PCIe-6259, but has not yet
been checked due to lack of hardware.) Initialize the `alt_route_name`
member of the board information for PCIe-6251 and PCIe-6259 to allow
them to make use of the routing information provided for PCI-6251 and
PCI-6259 respectively.
Cc: Éric Piel <piel@delmic.com>
Cc: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200207151400.272678-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do not have or do not provide routing information for all supported
boards. Some of the boards for which we do not provide routing
information actually have routes that are identical to a similar board
for which we already provide routing information.
To allow boards to share identical routing information, add an
`alt_route_name` member to `struct ni_board_struct`. This will be
initialized to `NULL` for all boards except those that will use make use
of the identical routing information that has been provided for a
similar board, in which case it will name that board. Pass the
`alt_route_name` member value to `ni_assign_device_routes()` as the
`alt_board_name` parameter, which it will use if no routing information
could be found for the actual board name.
Cc: Éric Piel <piel@delmic.com>
Cc: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200207151400.272678-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do not have or provide routing information available for all
supported boards. Some of the boards for which we do not currently
provide routing information actually have identical routes to a similar
board for which we do provide routing information. To avoid having to
provide duplicate routing information, add an "alternate board name"
parameter (possibly `NULl`) to `ni_assign_device_routes()` and
`ni_find_device_routes()`. If the routing information cannot be found
for the actual board name, try finding it using the alternate board
name.
Cc: Éric Piel <piel@delmic.com>
Cc: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200207151400.272678-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
