Commit Graph

2160 Commits

Author SHA1 Message Date
Benjamin Tissoires
b905811a49 HID: usbhid: prevent unwanted events to be sent when re-opening the device
When events occurs while no one is listening to the node (hid->open == 0
and usb_kill_urb() called) some events are still stacked somewhere in
the USB (kernel or device?) stack. When the node gets reopened, these
events are drained, and this results in spurious touch down/up, or mouse
button clicks.

The problem was spotted with touchscreens in fdo bug #81781 [1], but it
actually occurs with any mouse using hid-generic or touchscreen.

A way to reproduce it is to call:

$ xinput disable 9 ; sleep 5 ; xinput enable 9

With 9 being the device ID for the touchscreen/mouse. During the "sleep",
produce some touch events or click events. When "xinput enable" is called,
at least one click is generated.

This patch tries to fix this by draining the queue for 50 msec and
during this time frame, not forwarding these old events to the hid layer.

Hans completed the explanation:
"""
Devices like mice (basically any hid device) will have a fifo
on the device side, when we stop submitting urbs to get hid reports from
it, that fifo will fill up, and when we resume we will get whatever
is there in that fifo.
"""

[1] https://bugs.freedesktop.org/show_bug.cgi?id=81781

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 11:04:54 +01:00
Jason Gerecke
5989a55a4c HID: input: Fix TransducerSerialNumber implementation
The commit which introduced TransducerSerialNumber (368c966) is missing
two crucial implementation details. Firstly, the commit does not set the
type/code/bit/max fields as expected later down the code which can cause
the driver to crash when a tablet with this usage is connected. Secondly,
the call to 'set_bit' causes MSC_PULSELED to be sent instead of the
expected MSC_SERIAL. This commit addreses both issues.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:59:06 +01:00
Benjamin Tissoires
3a61e97563 HID: logitech-hidpp: support combo keyboard touchpad TK820
The TK820 presents both a keyboard and a touchpad on the same
physical (and logical device). Use the generic hid-input
processing for the keyboard part. The keyboard input device is created
when the receiver is plugged in, so no events are missed on connect.

When the device actaully connects, we can set it to use the raw
multitouch reporting to have a consistent user experience accross
all Logitech touchpads.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:42 +01:00
Benjamin Tissoires
57ac86cf52 HID: logitech-hidpp: add support of the first Logitech Wireless Touchpad
This touchpad differs from the T650 in several ways:
- the resolution is not correctly returned by the device
- it presents physical buttons, so the button flag in the raw touch report
  is not filled.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:41 +01:00
Benjamin Tissoires
586bdc4e4f HID: logitech-hidpp: Add Wireless Touchpad T650 support
All the bits are now in place to add the support of the
Touchpad T650.
The creation/population of the input device is delayed until
the device is ready.

The T650 uses the special HID++ reporting protocol, so activate
this on connect.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:41 +01:00
Benjamin Tissoires
c39e3d5fc9 HID: logitech-hidpp: late bind the input device on wireless connection
Now that the receiver forwards the connect/disconnect events, we can
know when the device is available to communicate with us.

When it is ready, we can for instance retrieve its full name, which
guarantee that we always have the same name for the DJ device (the DJ
name is somewhat shorter than the HID++ name).

This mechanism is mandatory for the touchpads line, which has the
min/max information stored in the device. This information can only
be retrieved when the device is connected. So we can not populate
the input device until we are sure that the device is connected.

This patch creates a new input device for such devices. However,
this input is not bound to hid directly, so the various drivers
which wants to use it are required to process completely the
incoming reports in .raw_event().

Note that the patch in itself just adds the bits for the next
ones, and this feature is disabled by default.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:41 +01:00
Benjamin Tissoires
6a9ddc8978 HID: logitech-dj: enable notifications on connect/disconnect
The receiver can send HID++ notifications to the DJ devices when the
physical devices are connected/disconnected.
Enable this feature by default.

This command uses a HID++ command instead of a DJ one, so use a direct
call to usbhid instead of using logi_dj_recv_send_report()

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:40 +01:00
Benjamin Tissoires
33797820af HID: logitech: allow the DJ device to request the unifying name
The names of the DJ devices are stored in the receiver. These names
can be retrieved through a HID++ command. However, the protocol says
that you have to ask the receiver for that, not the device iteself.

Introduce a special case in the DJ handling where a device can request
its unifying name, and when such a name is given, forward it also to
the corresponding device.

On the HID++ side, the receiver talks only HID++ 1.0, so we need to
implement this part of the protocol in the module.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:40 +01:00
Benjamin Tissoires
925f0f3ed2 HID: logitech-dj: allow transfer of HID++ reports from/to the correct dj device
HID++ is a Logitech-specific protocol for communicating with HID
devices. DJ devices implement HID++, and so we can add the HID++
collection in the report descriptor and forward the incoming
reports from the receiver to the appropriate DJ device.

The same can be done in the other way, if someone calls a
.raw_request(), we can forward it to the correct dj device
by overriding the device_index in the HID++ report.

Signed-off-by: Benjamin Tisssoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:40 +01:00
Benjamin Tissoires
ab94e562ed HID: logitech: move dj devices to the HID++ module
Devices connected through the Logitech Wireless Receiver are HID++ devices.
We can handle them here to benefit from this new module and activate
enhaced support of the various wireless touchpad or mice with touch
sensors on them.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:39 +01:00
Benjamin Tissoires
2f31c52529 HID: Introduce hidpp, a module to handle Logitech hid++ devices
Logitech devices use a vendor protocol to communicate various
information with the device. This protocol is called HID++,
and an exerpt can be found here:
https://drive.google.com/folderview?id=0BxbRzx7vEV7eWmgwazJ3NUFfQ28&usp=shar

The main difficulty which is related to this protocol is that
it is a synchronous protocol using the input reports.
So when we want to get some information from the device, we need
to wait for a matching input report.

This driver introduce this capabilities to be able to support
the multitouch mode of the Logitech Wireless Touchpad T651
(the bluetooth one). The multitouch data is available directly
from the mouse input reports, and we just need to query the device
on connect about its caracteristics.

HID++ and the touchpad features has a specific reporting mode
which uses pure HID++ reports, but Logitech told us not to use
it for this specific device. During QA, they detected that
some bluetooth input reports where lost, and so the only supported
mode is the pointer mode.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:39 +01:00
Benjamin Tissoires
8cb3746a6e HID: logitech-dj: merge header file into the source
There is no point in keeping the header in a separate file, nobody
but hid-logitech-dj should have access to its content.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:39 +01:00
Benjamin Tissoires
d610274b03 HID: logitech-dj: rely on hid groups to separate receivers from dj devices
Several benefits here:
- we can drop the macro is_dj_device: I never been really conviced by
  this macro as we could fall into a null pointer anytime. Anyway time
  showed that this never happened.
- we can simplify the hid driver logitech-djdevice, and make it aware
  of any new receiver VID/PID.
- we can use the Wireless PID of the DJ device as the product id of the
  hid device, this way the sysfs will differentiate between different
  DJ devices.

Signed-off-by: Benjamin Tisssoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:51:38 +01:00
Benjamin Tissoires
9578f41aea HID: core: do not scan reports if the group is already set
This allows the transport layer (I have in mind hid-logitech-dj and uhid)
to set the group before it is added to the hid bus. This way, it can
bypass the hid_scan_report() call, and choose in advance which driver
will handle the newly created hid device.

Signed-off-by: Benjamin Tisssoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:49:26 +01:00
Benjamin Tissoires
c241c5eea8 HID: fix merge from wacom into the HID tree
While merging wacom from the input to the hid tree, some
comments have been duplicated. We can also integrate the
test for Synaptics devices in the switch case below, so
it is clear that there will be only one place for such
quirks.

No functional changes are expected in this commit.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 10:49:23 +01:00
Hans de Goede
afdb5cce97 HID: input: Map unknown consumer page codes to KEY_UNKNOWN
Currently unknown consumer page codes are ignored, which means that they cannot
later be mapped from userspace using udev / hwdb. Map them to KEY_UNKNOWN, so
that userspace can remap them for keyboards which make up their own consumer
page codes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-22 11:59:58 +02:00
Olivier Gay
f974008f07 HID: add keyboard input assist hid usages
Add keyboard input assist controls usages from approved
hid usage table request HUTTR42:
http://www.usb.org/developers/hidpage/HUTRR42c.pdf

Signed-off-by: Olivier Gay <ogay@logitech.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-20 21:03:58 +02:00
Adel Gadllah
1af39588f8 HID: usbhid: enable always-poll quirk for Elan Touchscreen 016f
This device needs the quirk as well.

Tested-by: Kevin Fenzi <kevin@scrye.com>
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-10 14:47:55 +02:00
Adel Gadllah
29d05c2ecf HID: usbhid: enable always-poll quirk for Elan Touchscreen 009b
This device needs the quirk as well.

Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-10 14:47:54 +02:00
Linus Torvalds
ea584595fc This is the bulk of GPIO changes for the v3.18 development
cycle:
 
 - Increase the default ARCH_NR_GPIO from 256 to 512. This
   was done to avoid having a custom <asm/gpio.h> header for
   the x86 architecture - GPIO is custom and complicated
   enough as it is already! We want to move to a radix to
   store the descriptors going forward, and finally get rid
   of this fixed array size altogether.
 
 - Endgame patching of the gpio_remove() semantics initiated
   by Abdoulaye Berthe. It is not accepted by the system that
   the removal of a GPIO chip fails during e.g. reboot or
   shutdown, and therefore the return value has now painfully
   been refactored away. For special cases like GPIO expanders
   on a hot-pluggable bus like USB, we may later add some
   gpiochip_try_remove() call, but for the cases we have now,
   return values are moot.
 
 - Some incremental refactoring of the gpiolib core and ACPI
   GPIO library for more descriptor usage.
 
 - Refactor the chained IRQ handler set-up method to handle
   also threaded, nested interrupts and set up the parent IRQ
   correctly. Switch STMPE and TC3589x drivers to use this
   registration method.
 
 - Add a .irq_not_threaded flag to the struct gpio_chip, so
   that also GPIO expanders that block but are still not
   using threaded IRQ handlers.
 
 - New drivers for the ARM64 X-Gene SoC GPIO controller.
 
 - The syscon GPIO driver has been improved to handle the
   "DSP GPIO" found on the TI Keystone 2 SoC:s.
 
 - ADNP driver switched to use gpiolib irqchip helpers.
 
 - Refactor the DWAPB driver to support being instantiated
   from and MFD cell (platform device).
 
 - Incremental feature improvement in the Zynq, MCP23S08,
   DWAPB, OMAP, Xilinx and Crystalcove drivers.
 
 - Various minor fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUNOr0AAoJEEEQszewGV1z9toP/2ISXRnsi3+jlqVmEGm/y6EA
 PPwJOiYnOhZR2/fTCHIF0PNbIi9pw7xKnzxttYCu4uCz7geHX+FfTwUZ2/KWMfqi
 ZJ9kEoOVVKzKjmL/m2a2tO4IRSBHqJ8dF3yvaNjS3AL7EDfG6F5STErQurdLEynK
 SeJZ2OwM/vRFCac6F7oDlqAUTu3xYGbVD8+zI0H0V/ReocosFlEwcbl2S8ctDWUd
 h98M+gY+A8rxkvVMnmQ/k7rUTme/glDQ3z5xVx+uHbS2/a5M1jSM/71cXE6YnSrR
 it0CK7CHomq2RzHsKf7oH7GD4kFkukMwFKeMoqz75JWz3352VZPTF53chCIqRSgO
 hrgGwZ7WF6pUUUhsn1ZdZsnBPA2Fou2uwslyLSAiE+OYEH2/NSVIOUcorjQcWqU/
 0Kix5yb8X1ZzRMhR+TVrTD5V0jguqp2buXq+0P2XlU6MoO2vy7iNf2eXvPg8sF8C
 anjTCKgmkzy7eyT2uzfDaNZAyfSBKb1TiKiR9zA0SRChJkCi1ErJEXDGeHiptvSA
 +D2k68Ils2LqsvdrnEd2XvVFMllh0iq7b+16o7D+Els0WRbnHpfYCaqfOuF5F4U0
 SmeyI0ruawNDc5e9EBKXstt0/R9AMOetyTcTu29U2ZVo90zGaT1ofT8+R1jJ0kGa
 bPARJZrgecgv1E9Qnnnd
 =8InA
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO changes from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.18 development cycle:

   - Increase the default ARCH_NR_GPIO from 256 to 512.  This was done
     to avoid having a custom <asm/gpio.h> header for the x86
     architecture - GPIO is custom and complicated enough as it is
     already! We want to move to a radix to store the descriptors going
     forward, and finally get rid of this fixed array size altogether.

   - Endgame patching of the gpio_remove() semantics initiated by
     Abdoulaye Berthe.  It is not accepted by the system that the
     removal of a GPIO chip fails during eg reboot or shutdown, and
     therefore the return value has now painfully been refactored away.
     For special cases like GPIO expanders on a hot-pluggable bus like
     USB, we may later add some gpiochip_try_remove() call, but for the
     cases we have now, return values are moot.

   - Some incremental refactoring of the gpiolib core and ACPI GPIO
     library for more descriptor usage.

   - Refactor the chained IRQ handler set-up method to handle also
     threaded, nested interrupts and set up the parent IRQ correctly.
     Switch STMPE and TC3589x drivers to use this registration method.

   - Add a .irq_not_threaded flag to the struct gpio_chip, so that also
     GPIO expanders that block but are still not using threaded IRQ
     handlers.

   - New drivers for the ARM64 X-Gene SoC GPIO controller.

   - The syscon GPIO driver has been improved to handle the "DSP GPIO"
     found on the TI Keystone 2 SoC:s.

   - ADNP driver switched to use gpiolib irqchip helpers.

   - Refactor the DWAPB driver to support being instantiated from and
     MFD cell (platform device).

   - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP,
     Xilinx and Crystalcove drivers.

   - Various minor fixes"

* tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits)
  gpio: pch: Build context save/restore only for PM
  pinctrl: abx500: get rid of unused variable
  gpio: ks8695: fix 'else should follow close brace '}''
  gpio: stmpe: add verbose debug code
  gpio: stmpe: fix up interrupt enable logic
  gpio: staticize xway_stp_init()
  gpio: handle also nested irqchips in the chained handler set-up
  gpio: set parent irq on chained handlers
  gpiolib: irqchip: use irq_find_mapping while removing irqchip
  gpio: crystalcove: support virtual GPIO
  pinctrl: bcm281xx: make Kconfig dependency more strict
  gpio: kona: enable only on BCM_MOBILE or for compile testing
  gpio, bcm-kona, LLVMLinux: Remove use of __initconst
  gpio: Fix ngpio in gpio-xilinx driver
  gpio: dwapb: fix pointer to integer cast
  gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard
  gpio: xgene: Remove unneeded forward declation for struct xgene_gpio
  gpio: xgene: Fix missing spin_lock_init()
  gpio: ks8695: fix switch case indentation
  gpiolib: add irq_not_threaded flag to gpio_chip
  ...
2014-10-09 14:58:15 -04:00
Jiri Kosina
ee5db7e47f Merge branches 'for-3.18/always-poll-quirk', 'for-3.18/logitech', 'for-3.18/picolcd', 'for-3.18/rmi', 'for-3.18/sony', 'for-3.18/uhid', 'for-3.18/upstream' and 'for-3.18/wacom' into for-linus 2014-10-06 23:34:40 +02:00
Benjamin Tissoires
8493ecca74 HID: uHID: fix excepted report type
When uhid_get_report() or uhid_set_report() are called, they emit on the
char device a UHID_GET_REPORT or UHID_SET_REPORT message. Then, the
protocol says that the user space asnwers with UHID_GET_REPORT_REPLY
or UHID_SET_REPORT_REPLY.

Unfortunatelly, the current code waits for an event of type UHID_GET_REPORT
or UHID_SET_REPORT instead of the reply one.
Add 1 to UHID_GET_REPORT or UHID_SET_REPORT to actually wait for the
reply, and validate the reply.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01 20:58:46 +02:00
Oliver Neukum
5235166fbc HID: usbhid: add another mouse that needs QUIRK_ALWAYS_POLL
There is a second mouse sharing the same vendor strings but different IDs.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01 14:30:54 +02:00
Benjamin Tissoires
5ae6e89f74 HID: wacom: implement the finger part of the HID generic handling
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01 09:11:23 +02:00
Benjamin Tissoires
7704ac9373 HID: wacom: implement generic HID handling for pen generic devices
ISDv4 and v5 are plain HID devices. We can directly implement a generic
HID parsing/handling and remove the need to manually add those PID in
the list of supported devices.

This patch implements the pen support only. The finger part will come in
a later patch.

To be properly notified of an .event() and a .report(), we need to force
hid-core to go through the HID parsing. By default, wacom.ko binds only
hidraw, so the hid parsing is not done by hid-core. When a true HID device
is there, we add the flag HID_CLAIMED_DRIVER to hid->claimed which will
force hid-core to parse the incoming reports.
(Note that this can be easily backported by directly setting the .claimed
flag to HID_CLAIMED_DRIVER even if hid-core does not support
HID_CONNECT_DRIVER)

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01 09:11:23 +02:00
Benjamin Tissoires
494078b0bb HID: wacom: move allocation of inputs earlier
This allows to have the input devices ready in while parsing the reports
descriptor.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01 09:11:22 +02:00
Benjamin Tissoires
2546dacd3e HID: wacom: split out input allocation and registration
If the input can be created earlier during probe, we can already populate
them while reading the report descriptor. This way, we can rely on the
hid subsystem directly for tablets which already provide a meaningful
report descriptor (like ISDv4-5).

This patch only splits the allocation and registration, but do not
change where we allocate the input. This will come in a later patch.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01 09:11:22 +02:00
Benjamin Tissoires
7fefeec517 HID: wacom: rename failN with some meaningful information
When we have to deal with new elements in probe, having the exit labels
named sequencially is a pain to maintain. Put a meaningful name instead
so that we do not have to renumber them on inserts.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01 09:11:22 +02:00
Frank Praznik
981c5b4a3b HID: sony: Update the DualShock 4 touchpad resolution
The DualShock 4 touchpad has been measured to have a resolution of
44.86 dots/mm which equates to 1920x942.

Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-25 11:23:26 +02:00
Benjamin Tissoires
8ffffd5212 HID: wacom: fix timeout on probe for some wacoms
Some Wacom tablets (at least the ISDv4 found in the Lenovo X230) timeout
during probe while retrieving the input reports.
The only time this information is valuable is during the feature_mapping
stage, so we can ask for it there and discard the generic input reports
retrieval.

This gives a code path closer to the wacom.ko driver when it was in the
input subtree (not HID).

Cc: stable@vger.kernel.org # requires cherry-pick of c64d883476
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-22 16:54:36 +02:00
Frank Praznik
ce8efc3b56 HID: sony: Set touchpad bits in the input_configured callback
Set the DualShock4 touchpad bits in the input_configured callback
so that they are registered properly for any input devices created
during hid_hw_start.

Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-22 16:04:21 +02:00
abdoulaye berthe
88d5e520aa driver:gpio remove all usage of gpio_remove retval in driver
this remove all reference to gpio_remove retval in all driver
except pinctrl and gpio. the same thing is done for gpio and
pinctrl in two different patches.

Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com>
Acked-by: Michael Büsch <m@bues.ch>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-18 11:03:10 -07:00
Frank Praznik
077147a305 HID: sony: Update file header and correct comments
Update the file header and correct an outdated comment block.

Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-15 13:34:53 +02:00
Frank Praznik
fb291cbd3f HID: sony: Corrections for the DualShock 4 HID descriptor
Fix a few minor issues in the HID descriptor:
 - A 6 bit entry had a logical maximum of 255 when the largest it can be is 63.
 - A logical max value was incorrectly being set to -1 instead of 255.
 - Set the min/max of the gyroscopes to -8192/8191 as that is the range of
   values which represent the true controller orientation.  Any values beyond
   those extents are just noise.

Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-15 13:34:53 +02:00
Benjamin Tissoires
5b65c2a029 HID: rmi: check sanity of the incoming report
In the Dell XPS 13 9333, it appears that sometimes the bus get confused
and corrupts the incoming data. It fills the input report with the
sentinel value "ff". Synaptics told us that such behavior does not comes
from the touchpad itself, so we filter out such reports here.

Unfortunately, we can not simply discard the incoming data because they
may contain useful information. Most of the time, the misbehavior is
quite near the end of the report, so we can still use the valid part of
it.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1123584

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-12 22:57:41 +02:00
Benjamin Tissoires
12969e3bdc HID: wacom: make the WL connection friendly for the desktop
Currently, tablets connected to the WL receiver all share the same
VID/PID. There is no way for the user space to know which one is which
besides parsing the name. We can force the PID to be set to the
actual hardware. This way, the input device will have the correct PID
which can be match in libwacom.

With only this trick, the pad input does not inherit the ID_INPUT_TABLET
udev property from its parent. We can force udev to accept it by declaring
a BTN_STYLUS which is never used.

This way, tablets connected through WL can be used from the user point of
view in the same way they are used while connected through wire.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-12 14:13:08 +02:00
Ping Cheng
912ca216b5 HID: wacom - enable LED support for Wireless Intuos5/Pro
And associate all LED/OLED to PAD device

Signed-off-by: Ping Cheng <pingc@wacom.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-11 10:24:14 +02:00
Ping Cheng
c64d883476 HID: wacom - remove report_id from wacom_get_report interface
It is assigned in buf[0] anyway.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-11 10:24:13 +02:00
Ping Cheng
37449adc58 HID: wacom - Clean up of sysfs
changed to scnprintf(buf, PAGE_SIZE, ... ) as suggested in sysfs.txt
for show functions

Signed-off-by: Paul A. Tessier <phernost@gmail.com>
Signed-Off-by: Ping Cheng <pingc@wacom.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-11 10:24:13 +02:00
Ping Cheng
e0984bc376 HID: wacom - Add default permission defines for sysfs attributes
RW : ug=rw,o=r
WO : ug=w

And enabled reading relavent sysfs attributes.

Signed-off-by: Paul A. Tessier <phernost@gmail.com>
Signed-Off-by: Ping Cheng <pingc@wacom.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-11 10:24:11 +02:00
Oliver Neukum
4980f95755 HID: usbhid: fix PIXART optical mouse
This mouse keeps disconnecting in runlevel 3. It needs the ALWAYS_POLL quirk.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08 11:24:31 +02:00
John DeSilva
5df4eb054f HID: Add Holtek USB ID 04d9:a0c2 ETEKCITY Scroll
The report descriptor for the HOLTEK USB ID 04d9:a0c2 (ETEKCITY Scroll
T-140 Gaming Mouse) is set to a very large amount of consumer usages
(2^16), exceeding HID_MAX_USAGES. Added id, bindings and comments for
the mouse, added to hid_have_special_driver, and reduced the usage and
logical maximums to 0x2fff, consistent with the other mice in the
category. Tested on the hardware.

Signed-off-by: John C. DeSilva <desilvjo@umich.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08 09:48:56 +02:00
Hans Petter Selasky
643727a92e HID: fix ignore_special_drivers modparam description
Signed-off-by: Hans Petter Selasky <hps@selasky.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08 09:35:35 +02:00
Johan Hovold
bfe3c873e9 HID: usbhid: enable always-poll quirk for Elan Touchscreen
Enable the always-poll quirk for Elan Touchscreens found on some recent
Samsung laptops.

Without this quirk the device keeps disconnecting from the bus (and is
re-enumerated) unless opened (and kept open, should an input event
occur).

Note that while the device can be run-time suspended, the autosuspend
timeout must be high enough to allow the device to be polled at least
once before being suspended. Specifically, using autosuspend_delay_ms=0
will still cause the device to disconnect on input events.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08 09:29:16 +02:00
Johan Hovold
0b750b3baa HID: usbhid: add always-poll quirk
Add quirk to make sure that a device is always polled for input events
even if it hasn't been opened.

This is needed for devices that disconnects from the bus unless the
interrupt endpoint has been polled at least once or when not responding
to an input event (e.g. after having shut down X).

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08 09:29:15 +02:00
Christian Gmeiner
ffe51d0d8a HID: add support for PenMount HID TouchScreen Driver
This patch adds a seperate hid-penmount driver to work
around an issue with the HID report descriptor. The
descriptor does not contain the ContactID usage and as
result the touchscreen is represented as normal mouse
to the system.

This driver maps the button 0 emitted by the touchscreen
to BTN_TOUCH. This makes it possible to use touch events
in userspace.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-04 11:23:51 +02:00
Jiri Kosina
67a9784583 HID: thingm: fix workqueue race on remove
thingm_remove_rgb() needs to flush the workqueue after all the LED classes
have been unregistered, otherwise the removal might race with another LED
event coming, causing thingm_led_set() to schedule additional work after
thingm_remove_rgb() has flushed it. This obviously causes oops later, as
the scheduled work has been freed in the meantime.

In addition to that, move the hid_hw_stop() to an earlier place, so that
dmesg is not polluted by failure messages about not being able to write
the LED while the device is being shut down.

Reported-and-tested-by: Dylan Alex Simon <dylan-kernel@dylex.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-04 08:56:06 +02:00
Srinivas Pandruvada
467669c574 HID: hid-sensor-hub: re-add mistakenly removed USB_DEVICE_ID_STM_HID_SENSOR id
Adding USB_DEVICE_ID_STM_HID_SENSOR again in the quirk table. During 3.16 merge
cycle somehow quirk for device id USB_DEVICE_ID_STM_HID_SENSOR is missing.
I see commit dde3b45cd7 ("HID: hid-sensor-hub: new device id and quirk
for STM Sensor hub") added new id USB_DEVICE_ID_STM_HID_SENSOR_1,
but didn't really delete the old device id.
Anyway we need to add this back, otherwise it breaks ST sensor hubs.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-04 08:49:30 +02:00
Benjamin Tissoires
e4cf19ffe0 HID: thingm: set the proper error code before leaving
In case of an unsupported firmware, the driver bails out without setting
the LEDs interfaces, but forget to set the proper error code.
err is then still equal to 0 and the hid subsytem consider the device
to be in perfect shape.
When removing it, thingm_remove() tries to unbind the rgb LEDs which
has not been created, leading to a segfault.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-03 23:46:09 +02:00
Benjamin Tissoires
89f2ab55ea HID: wacom: Add support for the Cintiq Companion
The Wacom Cintiq Companion shares the same sensor than the Cintiq
Companion Hybrid, with the exception of the different PIDs.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-03 23:42:53 +02:00
Alan Stern
8f507ef522 HID: usbhid: improve handling of Clear-Halt and reset
This patch changes the way usbhid carries out Clear-Halt and reset.

Currently, after a Clear-Halt on the interrupt-IN endpoint, the driver
immediately restarts the interrupt URB, even if the Clear-Halt failed.
This doesn't work out well when the reason for the failure was that
the device was disconnected (when a low- or full-speed device is
connected through a hub to an EHCI controller, transfer errors caused
by disconnection are reported as stalls by the hub).  Instead now the
driver will attempt a reset after a failed Clear-Halt.

The way resets are carried out is also changed.  Now the driver will
call usb_queue_reset_device() instead of calling usb_reset_device()
directly.  This avoids a deadlock that would arise when a device is
unplugged: The hid_reset() routine runs as a workqueue item, a reset
attempt after the device has been unplugged will fail, failure will
cause usbhid to be unbound, and the disconnect routine will try to do
cancel_work_sync().  The usb_queue_reset_device() implementation is
carefully written to handle scenarios like this one properly.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-03 23:37:38 +02:00
Frank Praznik
9fddd74a23 HID: sony: Set the Sixaxis cable state correctly
Bit 3 in byte 31 of the Sixaxis report indicates whether the battery is
charging or not charging as opposed to whether or not the cable is plugged in.
As a result, when connected via USB and fully charged, the power_supply status
is wrongly reported as 'Discharging' instead of 'Full'.

Use the battery level value to set the cable state so that the power status
is reported correctly as that seems to be the only reliable way to determine the
cable status on the Sixaxis.

Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-01 11:20:52 +02:00
Jiri Kosina
604b607748 HID: picolcd: be more verbose when reporting report size error
picolcd device is not expected to send any report with size larger than
64 bytes.

If this impossible event happens (sic!), print also a report ID to allow
for easier debugging.

Suggested-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27 23:27:10 +02:00
Benjamin Tissoires
368d4e59b0 HID: logitech-dj: break out testing of validity of dj_device
We can do once the test of the validity of the dj_device, which removes
some duplicated code in various functions.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27 23:04:21 +02:00
Linus Torvalds
ff0c57ac70 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:

 - fixes for potential memory corruption problems in magicmouse and
   picolcd drivers (the HW would have to be manufactured to be
   deliberately evil to trigger those) which were found by Steven
   Vittitoe

 - fix for false error message appearing in dmesg from logitech-dj
   driver, from Benjamin Tissoires

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: picolcd: sanity check report size in raw_event() callback
  HID: magicmouse: sanity check report size in raw_event() callback
  HID: logitech-dj: prevent false errors to be shown
2014-08-27 09:38:06 -07:00
Jiri Kosina
844817e47e HID: picolcd: sanity check report size in raw_event() callback
The report passed to us from transport driver could potentially be
arbitrarily large, therefore we better sanity-check it so that raw_data
that we hold in picolcd_pending structure are always kept within proper
bounds.

Cc: stable@vger.kernel.org
Reported-by: Steven Vittitoe <scvitti@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27 09:14:39 +02:00
Jiri Kosina
c54def7bd6 HID: magicmouse: sanity check report size in raw_event() callback
The report passed to us from transport driver could potentially be
arbitrarily large, therefore we better sanity-check it so that
magicmouse_emit_touch() gets only valid values of raw_id.

Cc: stable@vger.kernel.org
Reported-by: Steven Vittitoe <scvitti@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27 09:14:39 +02:00
Benjamin Tissoires
79346d620e HID: input: force generic axis to be mapped to their user space axis
Atmel 840B digitizer presents a stylus interface which reports twice
the X coordinate and then twice the Y coordinate. In its current
implementation, hid-input assign the first X to X, then the second to Y,
then the first Y to Z, then the second one to RX.

This is wrong, and X should always be mapped to X, no matter what.
A solution consists in forcing X, Y, Z, RX, RY, RZ to be mapped to their
correct user space counter part.

Reported-by: Éric Brunet <Eric.Brunet@lps.ens.fr>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-26 09:24:45 +02:00
David Herrmann
c2b2f16c5c HID: uhid: report to user-space whether reports are numbered
This makes UHID_START include a "dev_flags" field that describes details
of the hid-device in the kernel. The first flags we introduce describe
whether a given report-type uses numbered reports. This is useful for
transport layers that force report-numbers and therefore might have to
prefix kernel-provided HID-messages with the report-number.

Currently, only HoG needs this and the spec only talks about "global
report numbers". That is, it's a global boolean not a per-type boolean.
However, given the quirks we already have in kernel-space, a per-type
value seems much more appropriate.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 03:28:08 -05:00
David Herrmann
11c2215530 HID: uhid: implement SET_REPORT
We so far lacked support for hid_hw_raw_request(..., HID_REQ_SET_REPORT);
Add support for it and simply forward the request to user-space. Note that
SET_REPORT is synchronous, just like GET_REPORT, even though it does not
provide any data back besides an error code.

If a transport layer does SET_REPORT asynchronously, they can just ACK it
immediately by writing an uhid_set_report_reply to uhid.

This patch re-uses the synchronous uhid-report infrastructure to query
user-space. Note that this means you cannot run SET_REPORT and GET_REPORT
in parallel. However, that has always been a restriction of HID and due to
its blocking nature, this is just fine. Maybe some future transport layer
supports parallel requests (very unlikely), however, until then lets not
over-complicate things and avoid request-lookup-tables.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 03:28:08 -05:00
David Herrmann
7c4003bc36 HID: uhid: rename uhid_raw_request to uhid_hid_raw_request
We use strict prefixed in uhid.c:
  uhid_char_*: implement char-dev callbacks
  uhid_dev_*: implement uhid device management and runtime
  uhid_hid_*: implement hid-dev callbacks

uhid_raw_request is an hid callback, so rename it to uhid_hid_raw_request.

While at it, move it closer to it's extracted helpers and keep the same
order as in "struct hid_driver".

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 03:28:08 -05:00
David Herrmann
fa71f32b5d HID: uhid: add ABI compatible UHID_GET_REPORT replacing UHID_FEATURE
The old hdev->hid_get_raw_report() was broken by design. It was never
clear what kind of HW request it should trigger. Benjamin fixed that with
the core HID cleanup, though we never really adjusted uhid.

Unfortunately, our old UHID_FEATURE command was modelled around the broken
hid_get_raw_report(). We converted it silently to the new GET_REPORT and
nothing broke. Make this explicit by renaming UHID_FEATURE to
UHID_GET_REPORT and UHID_FEATURE_ANSWER to UHID_GET_REPORT_REPLY.

Note that this is 100% ABI compatible to UHID_FEATURE. This is just a
rename. But we have to keep the old definitions around to not break API.

>From now on, UHID_GET_REPORT must trigger a GET_REPORT request on the
user-space hardware layer. All the ambiguity due to the weird "feature"
name should be gone now.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 03:28:07 -05:00
David Herrmann
5942b849b1 HID: uhid: invert report_done and make non-atomic
All accesses to @report_done are protected by qlock (or report-contexts).
No need to use an atomic.

While at it, invert the logic and call it "report_running". This is
similar to the uhid->running field and easier to read.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 03:28:07 -05:00
David Herrmann
8cad5b0171 HID: uhid: turn report_id into u32
All accesses to @report_id are protected by @qlock. No need to use an
atomic.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 03:28:06 -05:00
David Herrmann
25be7fe2be HID: uhid: avoid magic-numbers when setting strings
Avoid hard-coding the target buffer sizes and use sizeof() instead. This
also makes us future-proof to buffer-extensions later on.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 03:28:06 -05:00
David Herrmann
41c4a46423 HID: uhid: avoid dangling pointers in uhid context
Avoid keeping uhid->rd_data and uhid->rd_size set in case
uhid_dev_create2() fails. This is non-critical as we never flip
uhid->running and thus never enter uhid_dev_destroy(). However, it's much
nicer for debugging if pointers are only set if they point to valid data.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 03:28:06 -05:00
David Herrmann
56c4775463 HID: uhid: forward create_req to create2_req
Instead of hard-coding the uhid_dev_create() function twice, copy any
create_req into a create2_req structure and forward it.

We allocate uhid_create_req on the stack here, but that should be fine.
Unlike uhid_create2_req it is fairly small (<1KB) and it's only used
temporarily to swap entries. uhid_dev_create2() doesn't access it.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 03:28:05 -05:00
David Herrmann
0e0d752006 HID: uhid: simplify report-cb shutdown
The report-query is blocking, so when user-space destroys a device we have
to wake up any blocking kernel context that is currently in the report-cb.
We used some broken correlation between @report_done and @running so far.
Replace it by a much more obvious use.

We now wake up the report-cb if either @report_done or @running is set.
wake_up() and wait_event() serve as implicit barriers (as they always do)
so no need to use smp_rmb/wmb directly.

Note that @report_done is never reset by anyone but the report-cb, thus
it cannot flip twice while we wait for it. And whenever we set @running,
we afterwards synchronously remove the HID device. Therefore, we wait for
all report-cbs to finish before we return. This way, @running can never
flip to true while we wait for it.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 03:28:05 -05:00
Benjamin Tissoires
5abfe85c1d HID: logitech-dj: prevent false errors to be shown
Commit "HID: logitech: perform bounds checking on device_id early
enough" unfortunately leaks some errors to dmesg which are not real
ones:
- if the report is not a DJ one, then there is not point in checking
  the device_id
- the receiver (index 0) can also receive some notifications which
  can be safely ignored given the current implementation

Move out the test regarding the report_id and also discards
printing errors when the receiver got notified.

Fixes: ad3e14d7c5

Cc: stable@vger.kernel.org
Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25 02:59:51 -05:00
Linus Torvalds
cee5aa1f81 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:

 - fixes for a couple potential memory corruption problems (the HW would
   have to be manufactured to be deliberately evil to trigger those)
   found by Ben Hawkes
 - fix for potential infinite loop when using sysfs interface of
   logitech driver, from Simon Wood
 - a couple more simple driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: fix a couple of off-by-ones
  HID: logitech: perform bounds checking on device_id early enough
  HID: logitech: fix bounds checking on LED report size
  HID: logitech: Prevent possibility of infinite loop when using /sys interface
  HID: rmi: print an error if F11 is not found instead of stopping the device
  HID: hid-sensor-hub: use devm_ functions consistently
  HID: huion: Use allocated buffer for DMA
  HID: huion: Fail on parameter retrieval errors
2014-08-21 14:25:20 -07:00
Jiri Kosina
4ab25786c8 HID: fix a couple of off-by-ones
There are a few very theoretical off-by-one bugs in report descriptor size
checking when performing a pre-parsing fixup. Fix those.

Cc: stable@vger.kernel.org
Reported-by: Ben Hawkes <hawkes@google.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-21 10:43:28 -05:00
Jiri Kosina
ad3e14d7c5 HID: logitech: perform bounds checking on device_id early enough
device_index is a char type and the size of paired_dj_deivces is 7
elements, therefore proper bounds checking has to be applied to
device_index before it is used.

We are currently performing the bounds checking in
logi_dj_recv_add_djhid_device(), which is too late, as malicious device
could send REPORT_TYPE_NOTIF_DEVICE_UNPAIRED early enough and trigger the
problem in one of the report forwarding functions called from
logi_dj_raw_event().

Fix this by performing the check at the earliest possible ocasion in
logi_dj_raw_event().

Cc: stable@vger.kernel.org
Reported-by: Ben Hawkes <hawkes@google.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-21 10:43:06 -05:00
Jiri Kosina
51217e6969 HID: logitech: fix bounds checking on LED report size
The check on report size for REPORT_TYPE_LEDS in logi_dj_ll_raw_request()
is wrong; the current check doesn't make any sense -- the report allocated
by HID core in hid_hw_raw_request() can be much larger than
DJREPORT_SHORT_LENGTH, and currently logi_dj_ll_raw_request() doesn't
handle this properly at all.

Fix the check by actually trimming down the report size properly if it is
too large.

Cc: stable@vger.kernel.org
Reported-by: Ben Hawkes <hawkes@google.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-21 10:38:13 -05:00
Linus Torvalds
2f39691f31 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer fixes from Dmitry Torokhov:
 "Second round of updates for the input subsystem.  Mostly small fixups
  to the code merged in the first round (atmel_mxt_ts, wacom) but also a
  smallish patch to xbox driver to support Xbox One controllers and a
  patch to better handle Synaptics profile sensors found in Cr-48
  Chromebooks that should not affect any other devices"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: edt-ft5x06 - remove superfluous assignment
  Input: xpad - add support for Xbox One controllers
  Input: atmel_mxt_ts - fix a few issues reported by Coverity
  Input: atmel_mxt_ts - split config update a bit
  Input: atmel_mxt_ts - simplify mxt_initialize a bit
  Input: joystick - use get_cycles on ARMv8
  Input: wacom - fix compiler warning if !CONFIG_PM
  Input: cap1106 - allow changing key mapping from userspace
  Input: synaptics - use firmware data for Cr-48
  Input: synaptics - properly initialize slots for semi-MT
  Input: MT - make slot cleanup callable outside mt_sync_frame()
  Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AA
2014-08-15 18:16:28 -06:00
Simon Wood
29ff66571d HID: logitech: Prevent possibility of infinite loop when using /sys interface
If the device data is not accessible for some reason, returning 0 will cause the call to be
continuously called again as none of the string has been 'consumed'.

Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-15 10:54:13 +02:00
Andrew Duggan
daebdd7ee3 HID: rmi: print an error if F11 is not found instead of stopping the device
Currently rmi_probe will return -EIO if the device doesn't report that it has F11.
This would indicate that something happened and the device is in the bootloader.
We can recover the device using a userspace firmware update tool, but it needs
access to the device through the hidraw device file. If the probe returns -EIO
the hidraw device won't be created. So instead of failing the probe, just print
an error message, but leave the device accessible from userspace.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-14 11:41:56 +02:00
Geert Uytterhoeven
41a7458147 Input: wacom - fix compiler warning if !CONFIG_PM
If CONFIG_PM is not set:

drivers/hid/wacom_sys.c:1436: warning: ‘wacom_reset_resume’ defined but
not used

Protect the unused functions by #ifdef CONFIG_PM to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-12 09:59:29 -07:00
Himangi Saraogi
5be5db24fc HID: hid-sensor-hub: use devm_ functions consistently
Use devm_kzalloc for all calls to kzalloc and not just the first.  Use
devm functions for other allocations as well. The calls to free the
allocated memory in the probe and remove functions are done away with
and a label is removed in the probe function.

The semantic match that finds the inconsistency is as follows:

// <smpl>
@@
@@

*devm_kzalloc(...)
...
*kzalloc(...)
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-12 16:27:22 +02:00
Nikolai Kondrashov
6498d02306 HID: huion: Use allocated buffer for DMA
Allocate a buffer with kmalloc for receiving the parameters string
descriptor with usb_control_msg, instead of using a buffer on the stack,
as the latter is unsafe. Use an enum for indices into the buffer to
ensure the buffer size if sufficient.

This fixes the static checker error "doing dma on the stack (buf)".

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-12 12:44:59 +02:00
Nikolai Kondrashov
657d6dc419 HID: huion: Fail on parameter retrieval errors
Fail Huion tablet interface enabling and probing, if parameter retrieval
fails. Move the main code path out of the else block accordingly.

This should prevent devices appearing in a half-working state due to
original report descriptor being used, simplifying diagnostics. This
also makes it easier to add cleanup in later commits, as error handling
is simplified.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-12 12:44:58 +02:00
Linus Torvalds
664fb23070 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 - big update to Wacom driver by Benjamin Tissoires, converting it to
   HID infrastructure and unifying USB and Bluetooth models
 - large update to ALPS driver by Hans de Goede, which adds support for
   newer touchpad models as well as cleans up and restructures the code
 - more changes to Atmel MXT driver, including device tree support
 - new driver for iPaq x3xxx touchscreen
 - driver for serial Wacom tablets
 - driver for Microchip's CAP1106
 - assorted cleanups and improvements to existing drover and input core

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits)
  Input: wacom - update the ABI doc according to latest changes
  Input: wacom - only register once the MODULE_* macros
  Input: HID - remove hid-wacom Bluetooth driver
  Input: wacom - add copyright note and bump version to 2.0
  Input: wacom - remove passing id for wacom_set_report
  Input: wacom - check for bluetooth protocol while setting OLEDs
  Input: wacom - handle Intuos 4 BT in wacom.ko
  Input: wacom - handle Graphire BT tablets in wacom.ko
  Input: wacom - prepare the driver to include BT devices
  Input: hyperv-keyboard - register as a wakeup source
  Input: imx_keypad - remove ifdef round PM methods
  Input: jornada720_ts - get rid of space indentation and use tab
  Input: jornada720_ts - switch to using managed resources
  Input: alps - Rushmore and v7 resolution support
  Input: mcs5000_ts - remove ifdef around power management methods
  Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP
  Input: ads7846 - release resources on failure for clean exit
  Input: wacom - add support for 0x12C ISDv4 sensor
  Input: atmel_mxt_ts - use deep sleep mode when stopped
  ARM: dts: am437x-gp-evm: Update binding for touchscreen size
  ...
2014-08-08 17:39:48 -07:00
Linus Torvalds
43c40df2c7 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED updates from Bryan Wu:
 "This cycle we got:
   - a fix of attribute-creation race for the whole leds subsystem
   - new drivers (HID:GT683R, leds-ipaq-micro)
   - other fixing and clean up"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (23 commits)
  leds: ipaq-micro: fix sparse non static symbol warning
  leds: add driver for the iPAQ micro
  Documentation: dts: tcs6507: Fix wrong statement about #gpio-cells
  leds: convert blink timer to workqueue
  leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default
  leds:pca963x: Always initialize MODE2 register
  leds:pca963x: Add support for PCA9635 LED driver chip
  HID: gt683r: move mode attribute to led-class devices
  HID: gt683r: fix race condition
  HID: add support for MSI GT683R led panels
  leds: lp55xx-common: fix attribute-creation race
  leds: lp55xx-common: fix sysfs entry leak
  input: lm8323: fix attribute-creation race
  leds: wm831x-status: fix attribute-creation race
  leds: ss4200: fix attribute-creation race
  leds: ns2: fix attribute-creation race
  leds: netxbig: fix attribute-creation race
  leds: max8997: fix attribute-creation race
  leds: lm3642: fix attribute-creation race
  leds: lm355x: fix attribute-creation race
  ...
2014-08-07 17:25:10 -07:00
Dmitry Torokhov
5e2aa2ed08 Merge branch 'next' into for-linus
Prepare first round of input updates for 3.17.
2014-08-06 23:36:12 -07:00
Linus Torvalds
172bfe09dc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
 "Some highlights:

   - hid-sony improvements of Sixaxis device support by Antonio Ospite
   - hid-hyperv driven devices can now be used as wakeup source, by
     Dexuan Cui
   - hid-lenovo driver is now more generic and supports more devices, by
     Jamie Lentin
   - hid-huion now supports wider range of tablets, by Nikolai
     Kondrashov
   - other various unsorted fixes and device ID additions"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits)
  HID: hyperv: register as a wakeup source
  HID: sony: Default initialize all elements of the LED max_brightness array to 1
  HID: huion: Fix sparse warnings
  HID: usbhid: Use flag HID_DISCONNECTED when a usb device is removed
  HID: ignore jabra gn9350e
  HID: cp2112: add I2C mode
  HID: use multi input quirk for 22b9:2968
  HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices
  HID: rmi: check that report ids exist in the report_id_hash before accessing their size
  HID: lenovo: Add support for Compact (BT|USB) keyboard
  HID: lenovo: Don't call function in condition, show error codes
  HID: lenovo: Prepare support for adding other devices
  HID: lenovo: Rename hid-lenovo-tpkbd to hid-lenovo
  HID: huion: Handle tablets with UC-Logic vendor ID
  HID: huion: Switch to generating report descriptor
  HID: huion: Don't ignore other interfaces
  HID: huion: Use "tablet" instead of specific model
  HID: add quirk for 0x04d9:0xa096 device
  HID: i2c-hid: call the hid driver's suspend and resume callbacks
  HID: rmi: change logging level of log messages related to unexpected reports
  ...
2014-08-06 20:56:28 -07:00
Benjamin Tissoires
f2e0a7d4a0 Input: wacom - only register once the MODULE_* macros
Putting the various MODULE_* makes them appear several times in modinfo
because wacom.h is used both in wacom_sys.c and wacom_wac.h.
Having the macros near the module declaration makes them appear only once.

Add also MODULE_VERSION(DRIVER_VERSION) to export the current version
number.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06 15:14:55 -07:00
Benjamin Tissoires
7403a6a448 Input: HID - remove hid-wacom Bluetooth driver
Bluetooth Wacom tablets are now handled by the regular wacom.ko driver.
Remove the now useless hid-wacom driver.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06 15:14:54 -07:00
Benjamin Tissoires
1c3c523540 Input: wacom - add copyright note and bump version to 2.0
Reviewed-by: Ping Cheng <pingc@wacom.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06 15:14:53 -07:00
Przemo Firszt
296b737874 Input: wacom - remove passing id for wacom_set_report
Every call of wacom_set_report was passing "id" as a separate parameter
and buffer also passed the same information. We can use first u8 of the
buffer instead of "id"

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06 15:14:53 -07:00
Benjamin Tissoires
849e2f0678 Input: wacom - check for bluetooth protocol while setting OLEDs
Bluetooth Intuos 4 use 1-bit definition while the USB ones use a 4-bits
definition. This changes the size of the raw image we receive, and thus
the kernel will only accept 1-bit images for Bluetooth and 4-bits for
USB.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06 15:14:52 -07:00
Benjamin Tissoires
81af7e61a7 Input: wacom - handle Intuos 4 BT in wacom.ko
A good point of this change is that now, the Intuos4 bluetooth can handle
the different tools (artpen, airbrush, mice), and we get a common interface
between USB and BT for accessing the LEDs/OLEDs.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06 15:14:34 -07:00
Benjamin Tissoires
387142bb8f Input: wacom - handle Graphire BT tablets in wacom.ko
First, merge the Graphire BT tablet.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06 14:18:11 -07:00
Benjamin Tissoires
f81a1295cd Input: wacom - prepare the driver to include BT devices
Now that wacom is a hid driver, there is no point in having a separate
driver for bluetooth devices. This patch prepares the common paths of
Bluetooth devices in the common wacom driver. It also adds the sysfs file
"speed" used by Bluetooth devices.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06 14:18:10 -07:00
Jiri Kosina
cf6f397604 Merge branches 'for-3.17/upstream', 'for-3.17/cp2112', 'for-3.17/huion', 'for-3.17/hyperv', 'for-3.17/i2c', 'for-3.17/lenovo', 'for-3.17/rmi' and 'for-3.17/sony' into for-linus 2014-08-06 11:09:53 +02:00
Dexuan Cui
f1210455e7 HID: hyperv: register as a wakeup source
With this patch, we can move the mouse to wake up the VM after the VM executes
"echo freeze > /sys/power/state".

This addresses part of https://bugzilla.redhat.com/show_bug.cgi?id=1086100

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-04 11:20:20 +02:00
Frank Praznik
5607c89a11 HID: sony: Default initialize all elements of the LED max_brightness array to 1
Previously only the first element of the array was initialized to 1
leading to potential incorrect max brightness values for the LEDs
on the Dualshock 3 and buzzer controllers.

Use a designated initializer to initialize the whole array to the
correct value.

Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-30 11:25:22 +02:00
Nikolai Kondrashov
f20f6eccff HID: huion: Fix sparse warnings
Fix sparse warnings in hid-huion.c by using correct buffer type for
retrieved string descriptor.

The warnings in question were:

    drivers/hid/hid-huion.c:144:44: sparse: cast to restricted __le16
    drivers/hid/hid-huion.c:145:44: sparse: cast to restricted __le16
    drivers/hid/hid-huion.c:146:51: sparse: cast to restricted __le16
    drivers/hid/hid-huion.c:147:30: sparse: cast to restricted __le16

Reported-by: fengguang.wu@intel.com
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 15:07:08 +02:00
Reyad Attiyat
46df9dedab HID: usbhid: Use flag HID_DISCONNECTED when a usb device is removed
Set disconnected flag in struct usbhid when a usb device is removed. Check for
disconnected flag before sending urb requests. This prevents a kernel panic
when a hid driver calls hid_hw_request() after removing a usb device.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
 IP: [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290
 PGD 0
 Oops: 0002 [#1] PREEMPT SMP
 CPU: 2 PID: 39 Comm: khubd Tainted: G          IO  3.16.0-rc5+ #112
 Hardware name: Microsoft Corporation Surface Pro 2/Surface Pro 2, BIOS 2.03.0250 09/06/2013
 task: ffff880118aba6e0 ti: ffff8800daf80000 task.ti: ffff8800daf80000
 RIP: 0010:[<ffffffff8161746f>]  [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290
 RSP: 0018:ffff8800daf83750  EFLAGS: 00010086
 RAX: 0000000080000300 RBX: ffff88003f60c000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880117f78000
 RBP: ffff8800daf83788 R08: 0000000000000001 R09: 0000000000000001
 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880117f78000
 R13: ffff88003f11a290 R14: 000000000000000c R15: ffff880091cb3ab8
 FS:  0000000000000000(0000) GS:ffff88011b000000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000058 CR3: 0000000001c11000 CR4: 00000000001407e0
 Stack:
  ffff880117f3dcd0 ffff880117f78000 ffff88003f60c000 ffff880117f78000
  ffff880117f78000 ffff88003f11a290 0000000000000000 ffff8800daf837b0
  ffffffff81617707 ffff880117f78000 ffff88003f60c000 0000000000000013
 Call Trace:
  [<ffffffff81617707>] usbhid_restart_ctrl_queue+0x87/0x140
  [<ffffffff81617a88>] usbhid_submit_report+0x2c8/0x370
  [<ffffffff81617b4a>] usbhid_request+0x1a/0x30
  [<ffffffffa020edfb>] sensor_hub_set_feature+0x8b/0xd0 [hid_sensor_hub]
  [<ffffffffa02d9084>] hid_sensor_power_state+0x84/0x110 [hid_sensor_trigger]
  [<ffffffffa02d9129>] hid_sensor_data_rdy_trigger_set_state+0x19/0x20 [hid_sensor_trigger]
  [<ffffffffa034d5b7>] iio_triggered_buffer_predisable+0xa7/0xb0 [industrialio]
  [<ffffffffa034cc4a>] iio_disable_all_buffers+0x3a/0xc0 [industrialio]
  [<ffffffffa03487d3>] iio_device_unregister+0x53/0x80 [industrialio]
  [<ffffffffa026c06a>] hid_accel_3d_remove+0x2a/0x50 [hid_sensor_accel_3d]
  [<ffffffff814f433d>] platform_drv_remove+0x1d/0x40
  [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0
  [<ffffffff814f1955>] device_release_driver+0x25/0x40
  [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0
  [<ffffffff814ed7d6>] device_del+0x136/0x1e0
  [<ffffffff81512190>] ? mfd_cell_disable+0x80/0x80
  [<ffffffff814f41d1>] platform_device_del+0x21/0xc0
  [<ffffffff814f4282>] platform_device_unregister+0x12/0x30
  [<ffffffff815121d3>] mfd_remove_devices_fn+0x43/0x50
  [<ffffffff814ed3e3>] device_for_each_child+0x43/0x70
  [<ffffffff81512105>] mfd_remove_devices+0x25/0x30
  [<ffffffffa020ebd7>] sensor_hub_remove+0x87/0x140 [hid_sensor_hub]
  [<ffffffff81607c5b>] hid_device_remove+0x6b/0xd0
  [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0
  [<ffffffff814f1955>] device_release_driver+0x25/0x40
  [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0
  [<ffffffff814ed7d6>] device_del+0x136/0x1e0
  [<ffffffff81607d47>] hid_destroy_device+0x27/0x60
  [<ffffffff81616972>] usbhid_disconnect+0x22/0x50
  [<ffffffff81568597>] usb_unbind_interface+0x77/0x2b0
  [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0
  [<ffffffff814f1955>] device_release_driver+0x25/0x40
  [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0
  [<ffffffff814ed7d6>] device_del+0x136/0x1e0
  [<ffffffff81565cd1>] usb_disable_device+0x91/0x2a0
  [<ffffffff8155b046>] usb_disconnect+0x96/0x2e0
  [<ffffffff8155d74a>] hub_thread+0xb5a/0x1840

Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 13:03:38 +02:00
Patrick Plattes
43c1a0a9db HID: ignore jabra gn9350e
Ignore Jabra GN9350E HID interface. USB audio is working nicely, but
registering as HID blocks USB mouse buttons. Since special userspace programs
are needed we will avoid attaching usbhid drivers in general.

Signed-off-by: Patrick Plattes <patrick@erdbeere.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:56:53 +02:00
Antonio Borneo
b9029345ed HID: cp2112: add I2C mode
cp2112 supports single I2C read/write transactions.  It can't combine I2C
transactions.

Add master_xfer, using similar code flow as for smbus_xfer.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:37:38 +02:00
Wen-chien Jesse Sung
d90b1cf0c4 HID: use multi input quirk for 22b9:2968
This device generates ABS_Z and ABS_RX events instead of ABS_X and
ABS_Y.

Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:36:30 +02:00
Andrew Duggan
e19ff99f25 HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices
On composite HID devices there may be multiple HID devices on separate interfaces, but hid-rmi
should only bind to the mouse interface. One example is the Dell Venue 11 Pro's keyboard dock
which contains a composite USB device with a HID touchpad and HID keyboard on separate intefaces.
Since the USB Vendor ID is Synaptic's, hid-core is currently trying to bind hid-rmi to all\of
the HID devices. This patch ensures that hid-rmi only binds to the mouse interface.

related bug:
https://bugzilla.kernel.org/show_bug.cgi?id=80091

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:28:49 +02:00
Andrew Duggan
dd3edeb6a0 HID: rmi: check that report ids exist in the report_id_hash before accessing their size
It is possible that the hid-rmi driver could get loaded onto a device which does not have the
expected report ids. This should not happen because it would indicate that the hid-rmi driver is
not compatible with that device. However, if it does happen it should return an error from probe
instead of dereferencing a null pointer.

related bug:
https://bugzilla.kernel.org/show_bug.cgi?id=80091

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:28:49 +02:00
Jamie Lentin
f3d4ff0e04 HID: lenovo: Add support for Compact (BT|USB) keyboard
Add support for both ThinkPad Compact Bluetooth Keyboard with
TrackPoint and ThinkPad Compact USB Keyboard with TrackPoint.

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:24:47 +02:00
Jamie Lentin
e0a6aad601 HID: lenovo: Don't call function in condition, show error codes
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:24:47 +02:00
Jamie Lentin
6a5b414b42 HID: lenovo: Prepare support for adding other devices
Ensure all tpkbd specifics are within a postfixed function, the
main functions for the driver should just switch to the appropriate
function depending on product ID. Given this, we can add extra devices
by including extra postfixed functions.

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:24:46 +02:00
Jamie Lentin
94723bfa7b HID: lenovo: Rename hid-lenovo-tpkbd to hid-lenovo
Rename module and all functions within so we can add support for other
keyboards in the same file. Rename the _tp postfix to _tpkbd, to
signify functions relevant to the TP USB keyboard.

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:24:46 +02:00
Nikolai Kondrashov
3f1f333232 HID: huion: Handle tablets with UC-Logic vendor ID
Add handling of Huion tablets with UC-Logic vendor ID, but the same
product ID to hid-huion driver. A Huion H580 was seen using it.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:21:25 +02:00
Nikolai Kondrashov
f8dd5cb2c6 HID: huion: Switch to generating report descriptor
Switch to generating tablet pen report descriptor from a template and
parameters retrieved from string descriptor 0x64.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:21:25 +02:00
Nikolai Kondrashov
fb853296d8 HID: huion: Don't ignore other interfaces
Don't ignore non pen-reporting interfaces as they may be used by some
models reusing the same product ID.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:21:25 +02:00
Nikolai Kondrashov
e917e98f48 HID: huion: Use "tablet" instead of specific model
Use word "tablet" in identifiers and comments instead of referring to specific
Huion tablet model name, as the product ID is used by at least several tablet
models.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:21:24 +02:00
Wangzhao Cai
30c6fd4277 HID: add quirk for 0x04d9:0xa096 device
I am using a USB keyborad that give me "usb_submit_urb(ctrl) failed: -1" error
when I plugin it.  and I need to wait for 10s for this device to be ready.

By adding this quirks, the usb keyborad is usable right after plugin

Signed-off-by: Wangzhao Cai <microcaicai@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:14:27 +02:00
Andrew Duggan
109571cf3e HID: i2c-hid: call the hid driver's suspend and resume callbacks
Currently, the i2c-hid driver does not call the suspend, resume, and
reset_resume callbacks in the hid_driver struct when those events occur.
This means that HID drivers for i2c-hid devices will not be able to execute
commands which may be needed during suspend or resume. One example is when a
touchpad using the hid-multitouch driver gets reset by i2c-hid coming out of
resume. Since the reset_resume callback never gets called the device is never
put back into the correct input mode. This patch calls the suspend and resume
callbacks and tries to duplicate the functionality of the usb-hid driver.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:11:31 +02:00
Andrew Duggan
01a5f8a401 HID: rmi: change logging level of log messages related to unexpected reports
Userspace tools may use hidraw to perform operations on the device from userspace while
hid-rmi is bound to the device. This can cause hid-rmi to print error messages when its
->raw_event() callback gets called as the reports pass through the HID stack. In this case
receiving responses which were not initiated by hid-rmi is not actually an error so the resulting
error messages are incorrect and misleading. This patch changes the log messages to debug so
that the messages can be turned on in the event that there is a problem and there is not
a userspace tool running.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:08:42 +02:00
Andrew Duggan
9e2c327ee8 HID: rmi: make compututation of the address of Query 12 more careful
There are additional queries which are optional and may not be present
depending on the configuration of the firmware. Knowing which queries are
present is needed to properly compute the address of Query 12 and all
subsequent queries. Additional bits in Query 1 are used to indicate the
presence of these optional queries.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29 11:08:41 +02:00
Jason Gerecke
aeaf50d4e7 Input: wacom - add support for 0x12C ISDv4 sensor
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28 10:56:50 -07:00
Benjamin Tissoires
7dbd229e10 Input: wacom - register an ac power supply for wireless devices
This is used by HID Bluetooth devices but also add some more information
to the USB Wireless Receiver.
We are just porting the bits from hid-wacom.c to the common driver here.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 18:55:54 -07:00
Benjamin Tissoires
d70420b914 Input: wacom - use a uniq name for the battery device
The current implementation uses "wacom_battery" as a generic name for
batteries. This prevents us to have two Wacom devices with a battery
attached as the power system will complain about the name which is already
registered.

Use an incremental name for each battery attached.

Related bug:
https://sourceforge.net/p/linuxwacom/bugs/248/

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 18:55:53 -07:00
Benjamin Tissoires
ac8d10101b Input: wacom - enhance Wireless Receiver battery reporting
- Reports the current status of the battery (discharging, charging, full).
- Also notify the upower daemon when there is a change in the battery
  value.
- keep the battery value as a percentage, not the raw value
- add WACOM_QUIRK_BATTERY to easily add a battery to a device (required
  for Bluetooth devices)

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 18:55:53 -07:00
Benjamin Tissoires
c757cbafd6 Input: wacom - put a flag when the led are initialized
This solves a bug with the wireless receiver:
- at plug, the wireless receiver does not know which Wacom device it is
  connected to, so it does not actually creates all the LEDs
- when the tablet connects, wacom->wacom_wac.features.type is set to the
  proper device so that wacom_wac can understand the packets
- when the receiver is unplugged, it detects that a LED should have been
  created (based on wacom->wacom_wac.features.type) and tries to remove
  it: crash when removing the sysfs group.

Side effect, we can now safely call several times wacom_destroy_leds().

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 18:55:52 -07:00
Jason Gerecke
0b335cad73 Input: wacom - support up to 2048 pressure levels with ISDv4
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 18:55:52 -07:00
Benjamin Tissoires
471d17148c Input: wacom - move the USB (now hid) Wacom driver in drivers/hid
wacom.ko is now a full HID driver, we have to move it into the proper
subdirectory: drivers/hid.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 18:55:38 -07:00
Benjamin Tissoires
29b4739134 Input: wacom - switch from an USB driver to a HID driver
All USB Wacom tablets are actually HID devices.
For historical reasons, they are handled as plain USB devices.
The current code makes more and more reference to the HID subsystem
like implementing its own HID report descriptor parser to handle new
devices.

From the user point of view, we can transparently switch from this state
to a driver handled in the HID subsystem and clean up a lot of USB specific
code in the wacom.ko driver.

The other benefit once the USB dependecies have been removed is that we can
use a tool like uhid to make regression tests and allow further cleanup or
new implementations without risking breaking current behaviors.

To match the current handling of devices in wacom_wac.c, we rely on the
hid_type set by usbhid. usbhid sets the hid_type to HID_TYPE_USBMOUSE when
it sees a USB boot mouse protocol declared and HID_TYPE_USBNONE when the
device is plain HID. There is thus a one to one matching between the list
of supported devices before and after the switch from USB to HID.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 18:53:50 -07:00
David Härdeman
c5540fbb9d [media] rc-core: remove protocol arrays
The basic API of rc-core used to be:

	dev = rc_allocate_device();
	dev->x = a;
	dev->y = b;
	dev->z = c;
	rc_register_device();

which is a pretty common pattern in the kernel, after the introduction of
protocol arrays the API looks something like:

	dev = rc_allocate_device();
	dev->x = a;
	rc_set_allowed_protocols(dev, RC_BIT_X);
	dev->z = c;
	rc_register_device();

There's no real need for the protocols to be an array, so change it
back to be consistent (and in preparation for the following patches).

[m.chehab@samsung.com: added missing changes at some files]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25 19:10:43 -03:00
Linus Torvalds
4c2f503aad Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
 "A few tiny HID subsystem fixes for 3.16"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: use multi input quirk for 22b9:2968
  HID: sensor-hub: fix potential memory leak
  HID: usbhid: quirk for PM1610 and PM1640 Touchscreen.
  HID: rmi: Protect PM-only functions by #ifdef CONFIG_PM
  HID: sensor-hub: introduce Kconfig dependency on IOMEM
  HID: sensor-hub: make dyn_callback_lock IRQ-safe
2014-07-07 13:13:03 -07:00
Antonio Borneo
beb9d007a8 HID: cp2112: fix gpio value in gpio_direction_output
CP2112 does not offer an atomic method to set both gpio
direction and value.
Also it does not permit to set gpio value before putting
gpio in output. In fact, accordingly to Silicon Labs
AN495, Rev. 0.2, cpt. 4.4, the HID report to set gpio
values "does not affect any pins that are not configured
as outputs".

This is confirmed on evaluation board CP2112-EK.
With current driver, after execute:
	echo in > /sys/class/gpio/gpio248/direction
	echo low > /sys/class/gpio/gpio248/direction
gpio output is still high. Only after a following
	echo low > /sys/class/gpio/gpio248/direction
gpio output gets low.

Fix driver by changing order of operations; first set
direction then set value.

The drawback of this new sequence is that we can have
a pulse on gpio pin when direction is changed from
input to output-low, but this cannot be avoided on
current CP2112.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-07 17:07:27 +02:00
Wen-chien Jesse Sung
3179e8e684 HID: use multi input quirk for 22b9:2968
This device generates ABS_Z and ABS_RX events instead of ABS_X and
ABS_Y.

Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-07 15:40:18 +02:00
Janne Kanniainen
6522fe1c39 HID: gt683r: move mode attribute to led-class devices
Move led_mode attribute from HID device to led-class devices and
rename it mode. This will also fix race condition by using
attribute-groups.

(cooloney@gmai.com: fix a typo in commit message)

Signed-off-by: Janne Kanniainen <janne.kanniainen@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-07-03 11:14:11 -07:00
Janne Kanniainen
c3883ae918 HID: gt683r: fix race condition
This will fix race condition noticed by Oliver Neukum. Sysfs files are
created before mutex and work are initialized.

Signed-off-by: Janne Kanniainen <janne.kanniainen@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-07-03 11:12:16 -07:00
Janne Kanniainen
f471d94802 HID: add support for MSI GT683R led panels
This driver adds support for USB controlled led panels that exists in
MSI GT683R laptop

Signed-off-by: Janne Kanniainen <janne.kanniainen@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-07-01 08:45:56 -07:00
Jiri Slaby
ceec634076 HID: sensor-hub: fix potential memory leak
hsdev is not freed in sensor_hub_probe when kasprintf inside the for
loop fails. This is because hsdev is not set to platform_data yet (to
be freed by the code in the err_no_mem label). So free the memory
explicitly in the 'if' branch, as this is the only place where this is
(and will) be needed.

Reported-by: coverity
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-30 13:21:50 +02:00
Fabian Frederick
ff2019456d HID: picolcd: remove unnecessary NULL test before debugfs_remove
Fix checkpatch warning:
WARNING: debugfs_remove(NULL) is safe this check is probably not required

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-30 09:54:22 +02:00
John Sung
66e5482752 HID: usbhid: quirk for PM1610 and PM1640 Touchscreen.
These device needs to be added to the quirks list with HID_QUIRK_NOGET,
otherwise they will reset upon receiving the get input report requests.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-27 16:02:39 +02:00
Himangi Saraogi
0a9597b70c HID: roccat: Drop cast
This patch removes the cast on data of type void* as it is not needed.
The following Coccinelle semantic patch was used for making the change:

@r@
expression x;
void* e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-27 00:33:44 +02:00
Antonio Ospite
ab030726b6 HID: sony: Remove an old and redundant comment
Remove an old redundant comment before sony_report_fixup(), it must have
been a leftover from the first version of the driver:
sony_report_fixup() now handles all the supported devices, not only the
Sony Vaio VGX.

The comment is also redundant as the same information provided by it is
also present in the body of the function.

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-25 21:21:19 +02:00
Antonio Ospite
fb705a6dc8 HID: sony: Format and comment sixaxis_rdesc
Reformat sixaxis_rdesc to reflect its HID structure, and comment each
field. This will make it easier to validate changes to the descriptor in
the future.

No functional changes are introduced, the descriptor is exactly the same
as before byte by byte.

The heavy lifting has been done with the help of hidrd-convert:
https://github.com/DIGImend/hidrd

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-25 21:21:18 +02:00
Antonio Ospite
c607fb8d67 HID: sony: Always override the Sixaxis descriptor
Simplify the logic of overriding the Sixaxis HID descriptor, this will
make it easier to amend the descriptor in future commits.

The current code does this:

	if (original sixaxis via USB or BT)
		fixup only a part of the descriptor
	else if (sixaxis compatible controller)
		override the _whole_ descriptor

but the end result is exactly the same, except for the trailing zero in
the case of original BT controllers.

So let's just regularize the process, and always override the HID
descriptor.

Always overriding the descriptor changes the current semantic a little
bit, before this change the BT descriptor still had the trailing zero
byte, while now it is exactly the same as the descriptor of the
controller via USB, but that does not affect proper operation of the
device.

Note that overriding the whole descriptor for original devices is not
strictly necessary for now, but it simplifies the code and in the future
the report descriptor will be patched further and keys will be remapped,
so it's handy to have only one place to patch.

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-25 21:21:18 +02:00
Antonio Ospite
50764650c9 HID: sony: Use the SIXAXIS_CONTROLLER constant when possible
Instead of checking for SIXAXIS_CONTROLLER_USB and SIXAXIS_CONTROLLER_BT
separately, a check on SIXAXIS_CONTROLLER can be used when setting
connect_mask.

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-25 21:21:17 +02:00
Geert Uytterhoeven
a278e26830 HID: rmi: Protect PM-only functions by #ifdef CONFIG_PM
If CONFIG_PM=n:

drivers/hid/hid-rmi.c:432: warning: ‘rmi_post_reset’ defined but not used
drivers/hid/hid-rmi.c:437: warning: ‘rmi_post_resume’ defined but not used

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-12 10:23:27 +02:00
Linus Torvalds
4251c2a670 Most of this is cleaning up various driver sysfs permissions so we can
re-add the perm check (we unified the module param and sysfs checks, but
 the module ones were stronger so we weakened them temporarily).
 
 Param parsing gets documented, and also "--" now forces args to be
 handed to init (and ignored by the kernel).
 
 Module NX/RO protections get tightened: we now set them before calling
 parse_args().
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTl+oJAAoJENkgDmzRrbjxtUEP/jIXml01jE2HquOJ/DfrCJOt
 ry5L5Iy8wVBRotTszrXqlD6+W8fLYsEdhM65Wof1H7X1qjaulqYZmrL7bQn4rIGN
 YPUmO5rOzECeAPNW5+e2JLnR4bmS99gVcWzJFCHUBd7Z8ceKaoIk7/XvUg6Mdjg7
 v0kJ5X+U9da2sVYYcZ71euth4ADLFDRNRexA1mPI6mKzJLOBgfvCBWZnkFVdBcjd
 VmL6ceFo/yP9Ed4pgG/4uXq1dZ4ZttpjPusDmNcjq+snOzsQb4tW+KB2Pr6iTwQy
 TDt7lQm5+xfUXgUG/S5L6PYn10P44Voo7AEJa+QK5YPSOY/eRVA0h4/ayP0vqDaJ
 LpZjqXbW77G4yOgEV9KRFLLXiFXykTh2TyCPYL5G2XVXQp1OmViu2f21JWJLFLgL
 mqOXYWdowOGVOOoTgwxIdxczCFCATJUaU5Ig6ay8C02E2mCwIV+IaGSdpsCiyjz/
 dNNumMxWg0NMo/c0YG4K3Ake6ZaGrwbnuJYijaEj6mgpifhh7k4yhFciXGLpkLnS
 Yuo4ORO0GX34z1+bX0iwrgMGPdy7+BnbXsDdWJsbsnwnKKes/Sp44fNl4lPwdM3n
 siaPsxmfAtl9EGqbkU1Fk+x5+X/Lv2I/7/nX5n53520RLkJJpbeMDfHUqpbrqeUN
 JNUTOZ9o72EqDVKnn175
 =IxSN
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Most of this is cleaning up various driver sysfs permissions so we can
  re-add the perm check (we unified the module param and sysfs checks,
  but the module ones were stronger so we weakened them temporarily).

  Param parsing gets documented, and also "--" now forces args to be
  handed to init (and ignored by the kernel).

  Module NX/RO protections get tightened: we now set them before calling
  parse_args()"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: set nx before marking module MODULE_STATE_COMING.
  samples/kobject/: avoid world-writable sysfs files.
  drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files.
  drivers/staging/speakup/: avoid world-writable sysfs files.
  drivers/regulator/virtual: avoid world-writable sysfs files.
  drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files.
  drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files.
  drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files.
  drivers/mtd/devices/docg3.c: avoid world-writable sysfs files.
  speakup: fix incorrect perms on speakup_acntsa.c
  cpumask.h: silence warning with -Wsign-compare
  Documentation: Update kernel-parameters.tx
  param: hand arguments after -- straight to init
  modpost: Fix resource leak in read_dump()
2014-06-11 16:09:14 -07:00
Chen Gang
4732aee97b HID: sensor-hub: introduce Kconfig dependency on IOMEM
When NO_IOMEM is enabled (e.g. score architecture), some drivers which
need HAS_IOMEM need notice about it, or it will report related warning:

  warning: (GPIO_SCH && GPIO_ICH && GPIO_VX855 && GPIO_RDC321X && IE6XX_WDT && RADIO_WL1273 && HID_SENSOR_HUB && MFD_NVEC) selects MFD_CORE which has unmet direct dependencies (HAS_IOMEM)

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-11 10:52:35 +02:00
Brian Norris
e2c76a8bad HID: Kconfig: drop remove Unicode non-breaking space from Kconfig
There is a UTF-8 non-breaking space character (0xc2 0xa0) after the "Y"
in "Say Y here". This is probably not intentional. Replace it with a
standard ASCII space (0x20).

If you can't see a difference here, I don't blame you :)

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-11 10:50:21 +02:00
Mathias Krause
81ba992689 HID: usbhid: remove unneeded initialization of quirks_param[]
The quirks_param array is located in the BSS, no need to explicitly
initialize it with NULL.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-10 14:29:24 +02:00
Jiri Kosina
0ccf091d1f HID: sensor-hub: make dyn_callback_lock IRQ-safe
dyn_callback_lock is being taken from IRQ context through hid_irq_in() ->
hid_input_report() -> sensor_hub_raw_event() -> sensor_hub_get_callback(),
therefore anyone else acquiring it needs to disable IRQs to disable deadlocks.

Reported-by: Alexander Holler <holler@ahsoftware.de>
Tested-by: Alexander Holler <holler@ahsoftware.de>
Reported-by: Reyad Attiyat <reyad.attiyat@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-10 11:05:43 +02:00
Jiri Kosina
beea3f4a29 Merge branches 'for-3.16/i2c-hid', 'for-3.16/rmi4', 'for-3.16/sony' and 'for-3.16/thingm' into for-linus 2014-06-04 13:09:43 +02:00
Jiri Kosina
af5666e0f7 Merge branches 'for-3.15/upstream-fixes' and 'for-3.16/upstream' into for-linus
Conflicts:
	drivers/hid/hid-sensor-hub.c
2014-06-04 13:09:01 +02:00
Jiri Kosina
e4aecaf2f5 HID: thingm: thingm_fwinfo[] doesn't need to be global
No need to pollute global namespace by thingm_fwinfo[]. Make it static.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-03 13:29:38 +02:00
Ping Cheng
368c96640d HID: core: add two new usages for digitizer
On Feb 17, 2014, two new usages are approved to HID usage Table 18 -
Digitizer Page:

5A	Secondary Barrel Switch		MC	16.4
5B	Transducer Serial Number	SV	16.3.1

This patch adds relevant definitions to hid/input. It also removes
outdated comments in hid.h.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-03 13:27:24 +02:00
Archana Patni
dde3b45cd7 HID: hid-sensor-hub: new device id and quirk for STM Sensor hub
Added STM sensor hub new device id. Also added this new device
in HID_SENSOR_HUB_ENUM_QUIRK to fix report descriptors.
These devices uses old FW which uses logical 0 as minimum.
In these, HID reports are not using proper collection classes.
So we need to fix report descriptors,for such devices. This
will not have any impact, if the FW uses logical 1 as minimum.

Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-02 13:14:06 +02:00
Jiri Kosina
9ea63c439c HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard
The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID
1a2c:0023 does not seem to be handling the reports initialization very well.
This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel
when connected, and a delay before its initialization.  This patch adds the
quirk for this device, which causes the delay to disappear.

[jkosina@suse.cz: remove superfluous comment and fix ordering]
Signed-off-by: Daniel Kamil Kozar <dkk089@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-02 10:58:27 +02:00
Reyad Attiyat
00478ee898 HID: hid-sensor-hub: Set report quirk for Microsoft Surface
Add the Microsoft Surface Pro 2 Type/Touch and default device hardware ID's
Set report quirk for the device in hid-sensor-hub

Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-28 16:24:53 +02:00