The exynos_drm_fb_set_buf_cnt() is used to set buffer count only in
exynos_drm_fbdev_update(). This patch sets directly buffer count in
exynos_drm_framebuffer_init() without using exynos_drm_fb_set_buf_cnt(),
so there is no any reason to keep exynos_drm_fb_set_buf_cnt().
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The cases of the switch statement ensure that reg_type
can never be REG_TYPE_NONE here.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The size check was incomplete. It only computed the
size of area of the drawing rectangle and checked if
the size still fit inside the buffer.
The correct check is to compute the position of the
last byte that the G2D engine is going to access and
then check if that position is still contained in the
buffer. In particular we need the stride information
to determine this.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos DRM reported that all planes for all supported sub-devices supports
only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each
Exynos DRM sub-drivers to provide the list of supported pixel formats
and registers this list to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch allows clients who want to use render node to access
rendering relevant ioctls - g2d, post processor and gem allocation.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Each CRTC's atomic_{begin/flush} must stop/start the update of shadow
registers to active register in the functions. This patch achieves these
purpose by moving the setting of protection bits to those functions from
decon_update_plane.
v2: rebased to the branch exynos-drm-next
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
These legacy helpers should only be used by shadow-attaching drivers.
KMS drivers has its own way to handle suspend/resume and don't need to
use these two helpers.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <daeinki@gmail.com>
From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Now that atomic modesetting is implemented for exynos enable the
DRIVER_ATOMIC flag on the driver's features.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos atomic commit procedures already does this job of waiting for
pending updates to finish, that means using pending_flip_queue is
pointless now because the disable CRTC procedure will never happen
during a page_flip.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add infrastructure to wait for all planes updates to finish by using
an atomic_t variable to track how many pending updates we are waiting
plus a wait_queue for the wait part.
It also changes vblank behaviour and keeps it enabled for all types
of updates
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The atomic modesetting interfaces supports async commits that should be
implemented by the drivers. If drm core requests an async commit
exynos_atomic_commit() will now schedule a work task to run the update later.
It also serializes commits that needs to run on the same crtc, putting the
following commit to wait until the current one is finished.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
fimd_update_plane() programs BUF_START[win] and during the update
BUF_START[win] is copied to BUF_START_S[win] (its shadow register)
and starts scanning out, then it raises a irq.
The fimd_irq_handler, in the case we have a pending_fb, will check
the fb value was copied to START_S register and finish the update
in case of success.
Based on patch from Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The current code was ignoring the end of update for all overlay planes,
caring only for the primary plane update in case of pageflip.
This change adds a change to start to check for pending updates for all
planes through exynos_plane->pending_fb. At the start of plane update the
pending_fb is set with the fb to be shown on the screen. Then only when to
fb is already presented in the screen we set pending_fb to NULL to
signal that the update was finished.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
fixup! drm/exynos: check for pending fb before finish update
Only set/clear the update bit in the CRTC's .atomic_begin()/flush()
so all planes are really committed at the same time.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
.prepare_plane() and .cleanup_plane() allows to perform extra operations
before and after the update of planes. For FIMD for example this will
be used to enable disable the shadow protection bit.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Unify handling of finished plane update to prepare for a following patch
that will check for the START and START_S regs to really make sure that
the plane was updated.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct drm_crtc already stores the enabled state of the crtc
thus we don't need to replicate enabled in exynos_drm_crtc.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Dee7
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.3-rc1
This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.
* tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/bridge: Put Kconfig entries in a separate menu
drm/panel: Add support for LG LG4573 480x800 4.3" panel
drm/panel: Add display timing for Okaya RS800480T-7X0GP
of: Add Okaya Electric America vendor prefix
drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel
drm/panel: simple: Add support for AUO B080UAN01
drm/panel: simple: Correct minimum hsync length of the HannStar HSD070PWW1 panel
drm/panel: simple: Add bus format for HannStar HSD070PWW1 LVDS panel
drm/bridge: Add vendor prefixes
drm/panel: Add Samsung prefix to panel drivers
drm/exynos: Remove PTN3460 dependency
The struct exynos_drm_gem_obj can have fields of the struct
exynos_drm_gem_buf then don't need to use exynos_drm_buf.c file.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The dma-buf codes of exynos drm is almost same with prime helpers. A
difference is that consider DMA_NONE when import dma-buf, but it's wrong
and we don't consider it any more, so we can use prime interface.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The function roundup_gem_size can be merged in exynos_drm_gem_create.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The function update_vm_cache_attr can be merged in exynos_drm_gem_mmap.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The function check_gem_flags is too simple, so it's better to move codes
in each consumer functions.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The userptr, write and pfnmap of struct exynos_drm_gem_buf are not used
anywhere.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Already struct exynos_drm_gem_buf has pages of the buffer, so we don't
need to copy from sg table of the buffer to sg table of dma-buf
attachment, just can make sg table from pages of the buffer.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The exynos_drm_gem_map_buf can be merged in exynos_drm_gem_fault.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There is no reason to use mutex locking in pagefault handler.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The convert_to_vm_err_msg is called just once by exynos_drm_gem_fault,
so it's simple not to use the function.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Already struct exynos_drm_gem_buf has pages of the buffer when buffer is
created, so just can use pages in page fault handler, we don't have to
make sgtable of the buffer. But this needs to construct pages of the
buffer that is imported from dma-buf prime.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct exynos_drm_encoder was justing wrapping struct drm_encoder, it had
only a drm_encoder member and the internal exynos_drm_encoders ops that
was directly mapped to the drm_encoder helper funcs.
So now exynos DRM uses struct drm_encoder directly, this removes
completely the struct exynos_drm_encoder.
v2: add empty .mode_fixup() and .mode_set() to DSI and DPI to avoid null
pointer.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
As we are removing the exynos encoder move the encoder setup operation
directly inside the exynos_drm_load()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This functions was just hiding the encoder and connector creation in
a way that was less clean than if we get rid of it. For example,
exynos_encoder ops had .create_connector() defined only because we were
handing off the encoder and connector creation to
exynos_drm_create_enc_conn(). Without this function we can directly call
the create_connector function internally in the code, without the need of
any vtable access.
It also does some refactoring in the code like creating a bind function
for dpi devices.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
.commit() is not used anymore, Exynos encoders now follow the
.enable()/.disable() semantics from drm atomic core, so remove this
callback.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_dp_commit() was getting called twice by exynos encoder core, once
inside the .enable() call and another time by .commit() itself.
The remove of the second call caused the wake of a bug, the operations
orders inside exynos_dp_commit was wrong and we had to move
exynos_dp_start_video() to be the last operation in there.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
hdmi_commit() was getting called twice by exynos encoder core, once inside
the .enable() call and another time by .commit() itself.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This struct was just representing encoder information, it was a member of
struct exynos_drm_encoder, so any code trying to access encoder data would
have to go through the encoder struct, get the display struct and then get
the data it want.
During this patchset we also realized that the only data
exynos_drm_encoder needs to store is the drm_encoder parent and the
exynos_drm_encoder_ops.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
All CRTCs can only be LCD, HDMI or VIDI, so basically all CRTCs will be a
possible CRTCs. This patch removes an extra function with switch that was
only checking if the CRTC type was one of those three above.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
These two display_ops are not used anywhere, remove them.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
phy_power_on() and phy_power_off() already checks for NULL pointer.
This patch removes the wrappers exynos_dp_phy_init() and
exynos_dp_phy_exit() since the only think they were doing was a check for
NULL phy.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The DRM Core doesn't have a dpms() operation anymore, everything
now is enable() or disable().
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Instead of blindly ignore the return value of enable_vblank return it
to the upper DRM layer for error handling.
Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rename crtc_{widht,height} to crtc_{w,h} and src_{width,height} to
src_{w,h} to make it similar to the atomic state names.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Now after the move to use drm_plane_state directly struct drm_plane_state
has many unused fields, along with others that weren't used before the
plane state change. Thus remove them all.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
For some fields the use of struct exynos_drm_plane filled with data from
the plane state just creates a source of duplicated information and
overhead. Here we change the crtc drivers to access the plane state
directly simplifying the code by not relying on a exynos internal struct.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We already have the plane pointer in before calling .update_plane() or
disable_plane() so pass it directly to those calls avoiding a new
conversion from zpos to struct exynos_drm_plane.
v2: don't remove check for suspended in FIMD (comment by Joonyoung)
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The same check is placed twice in fimd/decon_update_plane(), remove
one of them.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Get rid of legacy DRM vblank function that are less clear to use.
The new ones basically requires only the crtc as parameters.
It also clean ups exynos_drm_crtc_finish_pageflip() parameters as a
consequence.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>