nf_conntrack_lock is a monolithic lock and suffers from huge contention
on current generation servers (8 or more core/threads).
Perf locking congestion is clear on base kernel:
- 72.56% ksoftirqd/6 [kernel.kallsyms] [k] _raw_spin_lock_bh
- _raw_spin_lock_bh
+ 25.33% init_conntrack
+ 24.86% nf_ct_delete_from_lists
+ 24.62% __nf_conntrack_confirm
+ 24.38% destroy_conntrack
+ 0.70% tcp_packet
+ 2.21% ksoftirqd/6 [kernel.kallsyms] [k] fib_table_lookup
+ 1.15% ksoftirqd/6 [kernel.kallsyms] [k] __slab_free
+ 0.77% ksoftirqd/6 [kernel.kallsyms] [k] inet_getpeer
+ 0.70% ksoftirqd/6 [nf_conntrack] [k] nf_ct_delete
+ 0.55% ksoftirqd/6 [ip_tables] [k] ipt_do_table
This patch change conntrack locking and provides a huge performance
improvement. SYN-flood attack tested on a 24-core E5-2695v2(ES) with
10Gbit/s ixgbe (with tool trafgen):
Base kernel: 810.405 new conntrack/sec
After patch: 2.233.876 new conntrack/sec
Notice other floods attack (SYN+ACK or ACK) can easily be deflected using:
# iptables -A INPUT -m state --state INVALID -j DROP
# sysctl -w net/netfilter/nf_conntrack_tcp_loose=0
Use an array of hashed spinlocks to protect insertions/deletions of
conntracks into the hash table. 1024 spinlocks seem to give good
results, at minimal cost (4KB memory). Due to lockdep max depth,
1024 becomes 8 if CONFIG_LOCKDEP=y
The hash resize is a bit tricky, because we need to take all locks in
the array. A seqcount_t is used to synchronize the hash table users
with the resizing process.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Netfilter expectations are protected with the same lock as conntrack
entries (nf_conntrack_lock). This patch split out expectations locking
to use it's own lock (nf_conntrack_expect_lock).
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Preparation for disconnecting the nf_conntrack_lock from the
expectations code. Once the nf_conntrack_lock is lifted, a race
condition is exposed.
The expectations master conntrack exp->master, can race with
delete operations, as the refcnt increment happens too late in
init_conntrack(). Race is against other CPUs invoking
->destroy() (destroy_conntrack()), or nf_ct_delete() (via timeout
or early_drop()).
Avoid this race in nf_ct_find_expectation() by using atomic_inc_not_zero(),
and checking if nf_ct_is_dying() (path via nf_ct_delete()).
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
One spinlock per cpu to protect dying/unconfirmed/template special lists.
(These lists are now per cpu, a bit like the untracked ct)
Add a @cpu field to nf_conn, to make sure we hold the appropriate
spinlock at removal time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Changes while reading through the netfilter code.
Added hint about how conntrack nf_conn refcnt is accessed.
And renamed repl_hash to reply_hash for readability
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Via Simon Horman:
====================
* Whitespace cleanup spotted by checkpatch.pl from Tingwei Liu.
* Section conflict cleanup, basically removal of one wrong __read_mostly,
from Andi Kleen.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add whitespace after operator and put open brace { on the previous line
Cc: Tingwei Liu <liutingwei@hisense.com>
Cc: lvs-devel@vger.kernel.org
Signed-off-by: Tingwei Liu <tingw.liu@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
const __read_mostly does not make any sense, because const
data is already read-only. Remove the __read_mostly
for the ipvs genl_ops. This avoids a LTO
section conflict compile problem.
Cc: Wensong Zhang <wensong@linux-vs.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Patrick McHardy <kaber@trash.net>
Cc: lvs-devel@vger.kernel.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Adds a new property for hash set types, where if a set is created
with the 'forceadd' option and the set becomes full the next addition
to the set may succeed and evict a random entry from the set.
To keep overhead low eviction is done very simply. It checks to see
which bucket the new entry would be added. If the bucket's pos value
is non-zero (meaning there's at least one entry in the bucket) it
replaces the first entry in the bucket. If pos is zero, then it continues
down the normal add process.
This property is useful if you have a set for 'ban' lists where it may
not matter if you release some entries from the set early.
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Commit 1785e8f473 ("netfiler: ipset: Add net namespace for ipset") moved
the initialization print into net_init, which can get called a lot due
to namespaces. Move it back into init, reduce to pr_info.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
commit 2dfb973c0dcc6d2211 (add markmask for hash:ip,mark data type)
inserted IPSET_ATTR_MARKMASK in-between other enum values, i.e.
changing values of all further attributes. This causes 'ipset list'
segfault on existing kernels since ipset no longer finds
IPSET_ATTR_MEMSIZE (it has a different value on kernel side).
Jozsef points out it should be moved below IPSET_ATTR_MARK which
works since there is some extra reserved space after that value.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Introduce packet mark mask for hash:ip,mark data type. This allows to
set mark bit filter for the ip set.
Change-Id: Id8dd9ca7e64477c4f7b022a1d9c1a5b187f1c96e
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Introduce packet mark support with new ip,mark hash set. This includes
userspace and kernelspace code, hash:ip,mark set tests and man page
updates.
The intended use of ip,mark set is similar to the ip:port type, but for
protocols which don't use a predictable port number. Instead of port
number it matches a firewall mark determined by a layer 7 filtering
program like opendpi.
As well as allowing or blocking traffic it will also be used for
accounting packets and bytes sent for each protocol.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
net/netfilter/ipset/ip_set_hash_netnet.c:115:8-9: WARNING: return of 0/1 in function 'hash_netnet4_data_list' with return type bool
/c/kernel-tests/src/cocci/net/netfilter/ipset/ip_set_hash_netnet.c:338:8-9: WARNING: return of 0/1 in function 'hash_netnet6_data_list' with return type bool
Return statements in functions returning bool should use
true/false instead of 1/0.
Generated by: coccinelle/misc/boolreturn.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
ipset(8) for list:set says:
The match will try to find a matching entry in the sets and the
target will try to add an entry to the first set to which it can
be added.
However real behavior is bit differ from described. Consider example:
# ipset create test-1-v4 hash:ip family inet
# ipset create test-1-v6 hash:ip family inet6
# ipset create test-1 list:set
# ipset add test-1 test-1-v4
# ipset add test-1 test-1-v6
# iptables -A INPUT -p tcp --destination-port 25 -j SET --add-set test-1 src
# ip6tables -A INPUT -p tcp --destination-port 25 -j SET --add-set test-1 src
And then when iptables/ip6tables rule matches packet IPSET target
tries to add src from packet to the list:set test-1 where first
entry is test-1-v4 and the second one is test-1-v6.
For IPv4, as it first entry in test-1 src added to test-1-v4
correctly, but for IPv6 src not added!
Placing test-1-v6 to the first element of list:set makes behavior
correct for IPv6, but brokes for IPv4.
This is due to result, returned from ip_set_add() and ip_set_del() from
net/netfilter/ipset/ip_set_core.c when set in list:set equires more
parameters than given or address families do not match (which is this
case).
It seems wrong returning 0 from ip_set_add() and ip_set_del() in
this case, as 0 should be returned only when an element successfuly
added/deleted to/from the set, contrary to ip_set_test() which
returns 0 when no entry exists and >0 when entry found in set.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
This allows us to store user comment strings, but it could be also
used to store any kind of information that the user application needs
to link to the rule.
Scratch 8 bits for the new ulen field that indicates the length the
user data area. 4 bits from the handle (so it's 42 bits long, according
to Patrick, it would last 139 years with 1000 new rules per second)
and 4 bits from dlen (so the expression data area is 4K, which seems
sufficient by now even considering the compatibility layer).
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Allow userspace to specify the queue number or the errno code for QUEUE
and DROP verdicts.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a lockdep_nfnl_is_held() function and a nfnl_dereference() macro for
RCU dereferences protected by a NFNL subsystem mutex.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The next patch will introduce a nfnl_dereference() macro that actually
checks that the appropriate mutex is held and therefore needs a
subsystem argument.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This also adds NF_CT_LABELS_MAX_SIZE so it can be re-used
as BUILD_BUG_ON in nft_ct.
At this time, nft doesn't yet support writing to the label area;
when this changes the label->words handling needs to be moved
out of xt_connlabel.c into nf_conntrack_labels.c.
Also removes a useless run-time check: words cannot grow beyond
4 (32 bit) or 2 (64bit) since xt_connlabel enforces a maximum of
128 labels.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
0-DAY kernel build testing backend reported:
sparse warnings: (new ones prefixed by >>)
>> >> net/netfilter/xt_ipcomp.c:63:26: sparse: restricted __be16 degrades to integer
>> >> net/netfilter/xt_ipcomp.c:63:26: sparse: cast to restricted __be32
Fix this by using ntohs without shifting.
Tested with: make C=1 CF=-D__CHECK_ENDIAN__
Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conflicts:
drivers/net/bonding/bond_3ad.h
drivers/net/bonding/bond_main.c
Two minor conflicts in bonding, both of which were overlapping
changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull drm fixes from Dave Airlie:
"Lots of little small things, nothing too major: nouveau regression
fixes, vmware fixes for the new hw support, memory leaks in error path
fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits)
drm/radeon/ni: fix typo in dpm sq ramping setup
drm/radeon/si: fix typo in dpm sq ramping setup
drm/radeon: fix CP semaphores on CIK
drm/radeon: delete a stray tab
drm/radeon: fix display tiling setup on SI
drm/radeon/dpm: reduce r7xx vblank mclk threshold to 200
drm/radeon: fill in DRM_CAPs for cursor size
drm: add DRM_CAPs for cursor size
drm/radeon: unify bpc handling
drm/ttm: Fix memory leak in ttm_agp_backend.c
drm/ttm: declare 'struct device' in ttm_page_alloc.h
drm/nouveau: fix TTM_PL_TT memtype on pre-nv50
drm/nv50/disp: use correct register to determine DP display bpp
drm/nouveau/fb: use correct ram oclass for nv1a hardware
drm/nv50/gr: add missing nv_error parameter priv
drm/nouveau: fix ENG_RUNLIST register address
drm/nv4c/bios: disallow retrieving from prom on nv4x igp's
drm/nv4c/vga: decode register is in a different place on nv4x igp's
drm/nv4c/mc: nv4x igp's have a different msi rearm register
drm/nouveau: set irq_enabled manually
...
Pull HID update from Jiri Kosina:
- fixes for several bugs in incorrect allocations of buffers by David
Herrmann and Benjamin Tissoires.
- support for a few new device IDs by Archana Patni, Benjamin
Tissoires, Huei-Horng Yo, Reyad Attiyat and Yufeng Shen
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hyperv: make sure input buffer is big enough
HID: Bluetooth: hidp: make sure input buffers are big enough
HID: hid-sensor-hub: quirk for STM Sensor hub
HID: apple: add Apple wireless keyboard 2011 JIS model support
HID: fix buffer allocations
HID: multitouch: add FocalTech FTxxxx support
HID: microsoft: Add ID's for Surface Type/Touch Cover 2
HID: usbhid: quirk for CY-TM75 75 inch Touch Overlay
Pull networking fixes from David Miller:
1) kvaser CAN driver has fixed limits of some of it's table, validate
that we won't exceed those limits at probe time. Fix from Olivier
Sobrie.
2) Fix rtl8192ce disabling interrupts for too long, from Olivier
Langlois.
3) Fix botched shift in ath5k driver, from Dan Carpenter.
4) Fix corruption of deferred packets in TIPC, from Erik Hugne.
5) Fix newlink error path in macvlan driver, from Cong Wang.
6) Fix netpoll deadlock in bonding, from Ding Tianhong.
7) Handle GSO packets properly in forwarding path when fragmentation is
necessary on egress, from Florian Westphal.
8) Fix axienet build errors, from Michal Simek.
9) Fix refcounting of ubufs on tx in vhost net driver, from Michael S
Tsirkin.
10) Carrier status isn't set properly in hyperv driver, from Haiyang
Zhang.
11) Missing pci_disable_device() in tulip_remove_one), from Ingo Molnar.
12) AF_PACKET qdisc bypass mode doesn't adhere to driver provided TX
queue selection method. Add a fallback method mechanism to fix this
bug, from Daniel Borkmann.
13) Fix regression in link local route handling on GRE tunnels, from
Nicolas Dichtel.
14) Bonding can assign dup aggregator IDs in some sequences of
configuration, fix by making the allocation counter per-bond instead
of global. From Jiri Bohac.
15) sctp_connectx() needs compat translations, from Daniel Borkmann.
16) Fix of_mdio PHY interrupt parsing, from Ben Dooks
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
MAINTAINERS: add entry for the PHY library
of_mdio: fix phy interrupt passing
net: ethernet: update dependency and help text of mvneta
NET: fec: only enable napi if we are successful
af_packet: remove a stray tab in packet_set_ring()
net: sctp: fix sctp_connectx abi for ia32 emulation/compat mode
ipv4: fix counter in_slow_tot
irtty-sir.c: Do not set_termios() on irtty_close()
bonding: 802.3ad: make aggregator_identifier bond-private
usbnet: remove generic hard_header_len check
gre: add link local route when local addr is any
batman-adv: fix potential kernel paging error for unicast transmissions
batman-adv: avoid double free when orig_node initialization fails
batman-adv: free skb on TVLV parsing success
batman-adv: fix TT CRC computation by ensuring byte order
batman-adv: fix potential orig_node reference leak
batman-adv: avoid potential race condition when adding a new neighbour
batman-adv: properly check pskb_may_pull return value
batman-adv: release vlan object after checking the CRC
batman-adv: fix TT-TVLV parsing on OGM reception
...
Pull ARM fixes from Russell King:
"A range of ARM fixes. Biggest change is the stage-2 attributes used
for for hyp mode which were wrong. I've killed some bits in a couple
of DT files which turned out not to be required, and a few other
fixes.
One fix touches code outside of arch/arm, which is related to sorting
out the DMA masks correctly. There is a long standing issue with the
conversion from PFNs to addresses where people assume that shifting an
unsigned long left by PAGE_SHIFT results in a correct address. This
is not the case with C: the integer promotion happens at assignment
after evaluation. This fixes the recently introduced dma_max_pfn()
function, but there's a number of other places where we try this
directly on an unsigned long in the mm code"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 7957/1: add DSB after icache flush in __flush_icache_all()
Fix uses of dma_max_pfn() when converting to a limiting address
ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev
ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU
ARM: 7952/1: mm: Fix the memblock allocation for LPAE machines
ARM: 7950/1: mm: Fix stage-2 device memory attributes
ARM: dts: fix spdif pinmux configuration
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=iBAK
-----END PGP SIGNATURE-----
Merge tag 'jfs-3.14-rc4' of git://github.com/kleikamp/linux-shaggy
Pull jfs fix from David Kleikamp:
"Another ACL regression. This one more subtle"
* tag 'jfs-3.14-rc4' of git://github.com/kleikamp/linux-shaggy:
jfs: set i_ctime when setting ACL
The only place this is used outside rtnetlink.c is veth. So provide
wrapper function for this usage.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's slightly smaller/faster for some architectures.
Make sure def_multicast_addr is __aligned(2)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PHY library has been subject to some changes, new drivers and DT
interactions over the past few months. Add myself as a maintainer for
the core PHY library parts and drivers. Make sure the PHY library entry
also covers the Device Tree files which have a close interaction with
the MDIO bus, PHY connection and Ethernet PHY mode parsing.
CC: Grant Likely <grant.likely@linaro.org>
CC: Shaohui Xie <shaohui.xie@freescale.com>
CC: Andy Fleming <afleming@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The of_mdiobus_register_phy() is not setting phy->irq thus causing
some drivers to incorrectly assume that the PHY does not have an
IRQ associated with it. Not only do some drivers report no IRQ
they do not install an interrupt handler for the PHY.
Simplify the code setting irq and set the phy->irq at the same
time so that we cover the following issues, which should cover
all the cases the code will find:
- Set phy->irq if node has irq property and mdio->irq is NULL
- Set phy->irq if node has no irq and mdio->irq is not NULL
- Leave phy->irq as PHY_POLL default if none of the above
This fixes the issue:
net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI
to the correct:
net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
These include are here since kernel 2.2.7, but probably never used.
Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
phy_set_csma_params has a redundant (and impossible) check for
"retries", found by smatch. The check was supposed to be for
frame_retries, but wasn't moved during development when
phy_set_frame_retries was introduced. Also, maxBE >= 3 as required by
the standard is not enforced.
Remove the redundant check, assure max_be >= 3 and check -1 <=
frame_retries <= 7 in the correct function.
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the introduction of the support for Armada 375 and Armada 38x,
the hidden Kconfig option MACH_ARMADA_370_XP is being renamed to
MACH_MVEBU_V7. Therefore, the dependency that was used for the mvneta
driver can no longer work. This commit replaces this dependency by a
dependency on PLAT_ORION, which is used similarly for the mv643xx_eth
driver.
In addition to this, it takes this opportunity to adjust the
description and help text to indicate that the driver can is also used
for Armada 38x. Note that Armada 375 cannot use this driver as it has
a completely different networking unit, which will require a separate
driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If napi is left enabled after a failed attempt to bring the interface
up, we BUG:
fec 2188000.ethernet eth0: no PHY, assuming direct connection to switch
libphy: PHY fixed-0:00 not found
fec 2188000.ethernet eth0: could not attach to PHY
------------[ cut here ]------------
kernel BUG at include/linux/netdevice.h:502!
Internal error: Oops - BUG: 0 [#1] SMP ARM
...
PC is at fec_enet_open+0x4d0/0x500
LR is at __dev_open+0xa4/0xfc
Only enable napi after we are past all the failure paths.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
At first glance it looks like there is a missing curly brace but
actually the code works the same either way. I have adjusted the
indenting but left the code the same.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a typo in the Device Tree binding for the
leading '#'.
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the following functions, which are shorter and more in line
with common naming practice in the network subsystem.
tipc_bclink_send_msg->tipc_bclink_xmit
tipc_bclink_recv_pkt->tipc_bclink_rcv
tipc_disc_recv_msg->tipc_disc_rcv
tipc_link_send_proto_msg->tipc_link_proto_xmit
link_recv_proto_msg->tipc_link_proto_rcv
link_send_sections_long->tipc_link_iovec_long_xmit
tipc_link_send_sections_fast->tipc_link_iovec_xmit_fast
tipc_link_send_sync->tipc_link_sync_xmit
tipc_link_recv_sync->tipc_link_sync_rcv
tipc_link_send_buf->__tipc_link_xmit
tipc_link_send->tipc_link_xmit
tipc_link_send_names->tipc_link_names_xmit
tipc_named_recv->tipc_named_rcv
tipc_link_recv_bundle->tipc_link_bundle_rcv
tipc_link_dup_send_queue->tipc_link_dup_queue_xmit
link_send_long_buf->tipc_link_frag_xmit
tipc_multicast->tipc_port_mcast_xmit
tipc_port_recv_mcast->tipc_port_mcast_rcv
tipc_port_reject_sections->tipc_port_iovec_reject
tipc_port_recv_proto_msg->tipc_port_proto_rcv
tipc_connect->tipc_port_connect
__tipc_connect->__tipc_port_connect
__tipc_disconnect->__tipc_port_disconnect
tipc_disconnect->tipc_port_disconnect
tipc_shutdown->tipc_port_shutdown
tipc_port_recv_msg->tipc_port_rcv
tipc_port_recv_sections->tipc_port_iovec_rcv
release->tipc_release
accept->tipc_accept
bind->tipc_bind
get_name->tipc_getname
poll->tipc_poll
send_msg->tipc_sendmsg
send_packet->tipc_send_packet
send_stream->tipc_send_stream
recv_msg->tipc_recvmsg
recv_stream->tipc_recv_stream
connect->tipc_connect
listen->tipc_listen
shutdown->tipc_shutdown
setsockopt->tipc_setsockopt
getsockopt->tipc_getsockopt
Above changes have no impact on current users of the functions.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support of the device tree probing for the Renesas SH-Mobile SoCs
documenting the device tree binding as necessary.
This work is loosely based on the original patch by Nobuhiro Iwamatsu
<nobuhiro.iwamatsu.yj@renesas.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull request of 2014-02-18
One compile fix and one memory leak.
* tag 'ttm-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux:
drm/ttm: Fix memory leak in ttm_agp_backend.c
drm/ttm: declare 'struct device' in ttm_page_alloc.h
Pull request of 2014-02-18.
Nothing special. The biggest change is adding a couple of command defines and
packing the command data correctly.
* tag 'vmwgfx-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Fix command defines and checks
drm/vmwgfx: Fix possible integer overflow
drm/vmwgfx: Remove stray const
drm/vmwgfx: unlock on error path in vmw_execbuf_process()
drm/vmwgfx: Get maximum mob size from register SVGA_REG_MOB_MAX_SIZE
drm/vmwgfx: Fix a couple of sparse warnings and errors
Fix for 128x128 cursors, along with some misc fixes.
* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/ni: fix typo in dpm sq ramping setup
drm/radeon/si: fix typo in dpm sq ramping setup
drm/radeon: fix CP semaphores on CIK
drm/radeon: delete a stray tab
drm/radeon: fix display tiling setup on SI
drm/radeon/dpm: reduce r7xx vblank mclk threshold to 200
drm/radeon: fill in DRM_CAPs for cursor size
drm: add DRM_CAPs for cursor size
drm/radeon: unify bpc handling
This patch is an attempt to gather the Ethernet related bindings in one file,
like it's done in the MMC and some other subsystems. It should save some of
the trouble of documenting several properties over and over in each binding
document, instead only making reference to the main file.
I have used the Embedded Power Architecture(TM) Platform Requirements (ePAPR)
standard as a base for the properties description, also documenting some ad-hoc
properties that have been introduced over time despite having direct analogs in
ePAPR.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch.pl clean-up, from 14 error/ 277 warnings, to 0 errors, 7 warnings
Signed-off-by: Justin van Wijngaarden <justinvanwijngaarden@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville says:
====================
Please pull this batch of fixes intended for the 3.14 stream...
For the iwlwifi one, Emmanuel says:
"As explicitly written in the commit message, we prefer to disable Tx
AMPDU on NICs supported by iwldvm. This feature gives a big boost in
Tx performance, but the firmware is buggy and we can't rely on it.
Our hope is that most of the users out there want wifi to surf on
the web which means that they care more for Rx traffic than for Tx.
People who want to enable it can do so with the help of a module
parameter."
On top of that...
Dan Carpenter fixes a typo/thinko in ath5k.
Olivier Langlois fixes a couple of rtlwifi issues, one which leaves
IRQs disabled too long (causing a variety of problems elsewhere),
and one which fixes an incorrect return code when failing to enable
the NIC.
Russell King fixes a NULL pointer dereference in hostap.
Stanislaw Gruszka fixes a DMA coherence issue in the rtl8187 driver.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Veaceslav Falico says:
====================
bonding: add an option to rely on unvalidated arp packets
v4 -> v5:
Again per Nik's advise correct the bond_opts restrictions for arp_validate
- set it the same as arp_interval.
v3 -> v4:
Per Nikolay's advise, remove the new bond_opts restriction on modes setting
for arp_validate.
v2 -> v3:
Per Jay's advise, use the 'filter' keyword instead of 'arp' one, and use
his text for documentation. Also, rebase on the latest net-next. Sorry for
the delay, didn't manage to send it before net-next was closed.
v1 -> v2:
Don't remove the 'all traffic' functionality - rather, add new arp_validate
options to specify that we want *only* unvalidated arps.
Currently, if arp_validate is off (0), slave_last_rx() returns the
slave->dev->last_rx, which is always updated on *any* packet received by
slave, and not only arps. This means that, if the validation of arps is
off, we're treating *any* incoming packet as a proof of slave being up, and
not only arps.
This might seem logical at the first glance, however it can cause a lot of
troubles and false-positives, one example would be:
The arp_ip_target is NOT accessible, however someone in the broadcast domain
spams with any broadcast traffic. This way bonding will be tricked that the
slave is still up (as in - can access arp_ip_target), while it's not.
The net_device->last_rx is already used in a lot of drivers (even though the
comment states to NOT do it :)), and it's also ugly to modify it from bonding.
However, some loadbalance setups might rely on the fact that even non-arp
traffic is a sign of slave being up - and we definitely can't break anyones
config - so an extension to arp_validate is needed.
So, to fix this, add an option for the user to specify if he wants to
filter out non-arp traffic on unvalidated slaves, remove the last_rx from
bonding, *always* call bond_arp_rcv() in slave's rx_handler (which is
bond_handle_frame), and if we spot an arp there with this option on - update
the slave->last_arp_rx - and use it instead of net_device->last_rx. Finally,
rename last_arp_rx to last_rx to reflect the changes.
Also rename slave->jiffies to ->last_link_up, to reflect better its
meaning, add the new option's documentation and update the arp_validate one
to be a bit more descriptive.
====================
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
