Pull clocksource fixes from Thomas Gleixner:
"The recent addition of the early TSC clocksource breaks on machines
which have an unstable TSC because in case that TSC is disabled, then
the clocksource selection logic falls back to the early TSC which is
obviously bogus.
That also unearthed a few robustness issues in the clocksource
derating code which are addressed as well"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Rework stale comment
clocksource: Consistent de-rate when marking unstable
x86/tsc: Fix mark_tsc_unstable()
clocksource: Initialize cs->wd_list
clocksource: Allow clocksource_mark_unstable() on unregistered clocksources
x86/tsc: Always unregister clocksource_tsc_early
when they are writable by root. To fix the confusion, they should
be 0644. Note, either case root can still write to them.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuyBchQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmDLAQDyddL4DS480WXv3t3I/ZPwjHVuI4qS
cPUsAsjn3Xs9wAD+O6/rE8SL/Q2tUIWlWk9wC4YpGqEoR6R3x98qpnGP3gA=
=L/Kw
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Some of the files in the tracing directory show file mode 0444 when
they are writable by root. To fix the confusion, they should be 0644.
Note, either case root can still write to them.
Zhengyuan asked why I never applied that patch (the first one is from
2014!). I simply forgot about it. /me lowers head in shame"
* tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix the file mode of stack tracer
ftrace: Have set_graph_* files have normal file modes
Pull networking fixes from David Miller:
1) Various sockmap fixes from John Fastabend (pinned map handling,
blocking in recvmsg, double page put, error handling during redirect
failures, etc.)
2) Fix dead code handling in x86-64 JIT, from Gianluca Borello.
3) Missing device put in RDS IB code, from Dag Moxnes.
4) Don't process fast open during repair mode in TCP< from Yuchung
Cheng.
5) Move address/port comparison fixes in SCTP, from Xin Long.
6) Handle add a bond slave's master into a bridge properly, from
Hangbin Liu.
7) IPv6 multipath code can operate on unitialized memory due to an
assumption that the icmp header is in the linear SKB area. Fix from
Eric Dumazet.
8) Don't invoke do_tcp_sendpages() recursively via TLS, from Dave
Watson.
9) Fix memory leaks in x86-64 JIT, from Daniel Borkmann.
10) RDS leaks kernel memory to userspace, from Eric Dumazet.
11) DCCP can invoke a tasklet on a freed socket, take a refcount. Also
from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits)
dccp: fix tasklet usage
smc: fix sendpage() call
net/smc: handle unregistered buffers
net/smc: call consolidation
qed: fix spelling mistake: "offloded" -> "offloaded"
net/mlx5e: fix spelling mistake: "loobpack" -> "loopback"
tcp: restore autocorking
rds: do not leak kernel memory to user land
qmi_wwan: do not steal interfaces from class drivers
ipv4: fix fnhe usage by non-cached routes
bpf: sockmap, fix error handling in redirect failures
bpf: sockmap, zero sg_size on error when buffer is released
bpf: sockmap, fix scatterlist update on error path in send with apply
net_sched: fq: take care of throttled flows before reuse
ipv6: Revert "ipv6: Allow non-gateway ECMP for IPv6"
bpf, x64: fix memleak when not converging on calls
bpf, x64: fix memleak when not converging after image
net/smc: restrict non-blocking connect finish
8139too: Use disable_irq_nosync() in rtl8139_poll_controller()
sctp: fix the issue that the cookie-ack with auth can't get processed
...
It looks weird that the stack_trace_filter file can be written by root
but shows that it does not have write permission by ll command.
Link: http://lkml.kernel.org/r/1518054113-28096-1-git-send-email-liuzhengyuan@kylinos.cn
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The set_graph_function and set_graph_notrace file mode should be 0644
instead of 0444 as they are writeable. Note, the mode appears to be ignored
regardless, but they should at least look sane.
Link: http://lkml.kernel.org/r/1409725869-4501-1-git-send-email-linx.z.chen@intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Chen LinX <linx.z.chen@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Tracepoints should not give warning on OOM failures
- Use special field for function pointer in trace event
- Fix igrab issues in uprobes
- Fixes to the new histogram triggers
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuoYdBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtFnAP9X4+AVDQH0VfsMLSc9D+rK6WmcRIhv
q8J2gNPv3anM+AD/SFXWGO4ihN+0KDw/TqmJxESNEybq47vTZ/s5lM6A4gQ=
=fQbj
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes in tracing:
- Tracepoints should not give warning on OOM failures
- Use special field for function pointer in trace event
- Fix igrab issues in uprobes
- Fixes to the new histogram triggers"
* tag 'trace-v4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Do not warn on ENOMEM
tracing: Add field modifier parsing hist error for hist triggers
tracing: Add field parsing hist error for hist triggers
tracing: Restore proper field flag printing when displaying triggers
tracing: initcall: Ordered comparison of function pointers
tracing: Remove igrab() iput() call from uprobes.c
tracing: Fix bad use of igrab in trace_uprobe.c
When a redirect failure happens we release the buffers in-flight
without calling a sk_mem_uncharge(), the uncharge is called before
dropping the sock lock for the redirecte, however we missed updating
the ring start index. When no apply actions are in progress this
is OK because we uncharge the entire buffer before the redirect.
But, when we have apply logic running its possible that only a
portion of the buffer is being redirected. In this case we only
do memory accounting for the buffer slice being redirected and
expect to be able to loop over the BPF program again and/or if
a sock is closed uncharge the memory at sock destruct time.
With an invalid start index however the program logic looks at
the start pointer index, checks the length, and when seeing the
length is zero (from the initial release and failure to update
the pointer) aborts without uncharging/releasing the remaining
memory.
The fix for this is simply to update the start index. To avoid
fixing this error in two locations we do a small refactor and
remove one case where it is open-coded. Then fix it in the
single function.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When an error occurs during a redirect we have two cases that need
to be handled (i) we have a cork'ed buffer (ii) we have a normal
sendmsg buffer.
In the cork'ed buffer case we don't currently support recovering from
errors in a redirect action. So the buffer is released and the error
should _not_ be pushed back to the caller of sendmsg/sendpage. The
rationale here is the user will get an error that relates to old
data that may have been sent by some arbitrary thread on that sock.
Instead we simple consume the data and tell the user that the data
has been consumed. We may add proper error recovery in the future.
However, this patch fixes a bug where the bytes outstanding counter
sg_size was not zeroed. This could result in a case where if the user
has both a cork'ed action and apply action in progress we may
incorrectly call into the BPF program when the user expected an
old verdict to be applied via the apply action. I don't have a use
case where using apply and cork at the same time is valid but we
never explicitly reject it because it should work fine. This patch
ensures the sg_size is zeroed so we don't have this case.
In the normal sendmsg buffer case (no cork data) we also do not
zero sg_size. Again this can confuse the apply logic when the logic
calls into the BPF program when the BPF programmer expected the old
verdict to remain. So ensure we set sg_size to zero here as well. And
additionally to keep the psock state in-sync with the sk_msg_buff
release all the memory as well. Previously we did this before
returning to the user but this left a gap where psock and sk_msg_buff
states were out of sync which seems fragile. No additional overhead
is taken here except for a call to check the length and realize its
already been freed. This is in the error path as well so in my
opinion lets have robust code over optimized error paths.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When the call to do_tcp_sendpage() fails to send the complete block
requested we either retry if only a partial send was completed or
abort if we receive a error less than or equal to zero. Before
returning though we must update the scatterlist length/offset to
account for any partial send completed.
Before this patch we did this at the end of the retry loop, but
this was buggy when used while applying a verdict to fewer bytes
than in the scatterlist. When the scatterlist length was being set
we forgot to account for the apply logic reducing the size variable.
So the result was we chopped off some bytes in the scatterlist without
doing proper cleanup on them. This results in a WARNING when the
sock is tore down because the bytes have previously been charged to
the socket but are never uncharged.
The simple fix is to simply do the accounting inside the retry loop
subtracting from the absolute scatterlist values rather than trying
to accumulate the totals and subtract at the end.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A number of places relies on list_empty(&cs->wd_list), however the
list_head does not get initialized. Do so upon registration, such that
thereafter it is possible to rely on list_empty() correctly reflecting
the list membership status.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Diego Viola <diego.viola@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org
Cc: len.brown@intel.com
Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Link: https://lkml.kernel.org/r/20180430100344.472662715@infradead.org
Because of how the code flips between tsc-early and tsc clocksources
it might need to mark one or both unstable. The current code in
mark_tsc_unstable() only worked because previously it registered the
tsc clocksource once and then never touched it.
Since it now unregisters the tsc-early clocksource, it needs to know
if a clocksource got unregistered and the current cs->mult test
doesn't work for that. Instead use list_empty(&cs->list) to test for
registration.
Furthermore, since clocksource_mark_unstable() needs to place the cs
on the wd_list, it links the cs->list and cs->wd_list serialization.
It must not see a clocsource registered (!empty cs->list) but already
past dequeue_watchdog(). So place {en,de}queue{,_watchdog}() under the
same lock.
Provided cs->list is initialized to empty, this then allows us to
unconditionally use clocksource_mark_unstable(), regardless of the
registration state.
Fixes: aa83c45762 ("x86/tsc: Introduce early tsc clocksource")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Diego Viola <diego.viola@gmail.com>
Cc: len.brown@intel.com
Cc: rjw@rjwysocki.net
Cc: diego.viola@gmail.com
Cc: rui.zhang@intel.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180502135312.GS12217@hirez.programming.kicks-ass.net
Pull timer fixes from Thomas Gleixner:
"Two fixes from the timer departement:
- Fix a long standing issue in the NOHZ tick code which causes RB
tree corruption, delayed timers and other malfunctions. The cause
for this is code which modifies the expiry time of an enqueued
hrtimer.
- Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to
regression reports. Seems userspace _is_ relying on the documented
behaviour despite our hope that it wont"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
tick/sched: Do not mess with an enqueued hrtimer
- Fix display of module section addresses in sysfs, which were getting
hashed with %pK and breaking tools like perf.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZGdS
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
"Fix display of module section addresses in sysfs, which were getting
hashed with %pK and breaking tools like perf"
* tag 'modules-for-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Fix display of wrong module .text address
Here are 2 staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that you
pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuMyew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymXxACffYtMbj0Vg5pD0yAPqRzJ2iVMVE0AnRkp4BYQ
kXgAjDeSyrdKPUwQ7Hl2
=UNuF
-----END PGP SIGNATURE-----
Merge tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that
you pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wilc1000: fix NULL pointer exception in host_int_parse_assoc_resp_info()
staging: irda: remove remaining remants of irda code removal
If the user specifies an invalid field modifier for a hist trigger,
the current code correctly flags that as an error, but doesn't tell
the user what happened.
Fix this by invoking hist_err() with an appropriate message when
invalid modifiers are specified.
Before:
# echo 'hist:keys=pid:ts0=common_timestamp.junkusecs' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist
After:
# echo 'hist:keys=pid:ts0=common_timestamp.junkusecs' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist
ERROR: Invalid field modifier: junkusecs
Last command: keys=pid:ts0=common_timestamp.junkusecs
Link: http://lkml.kernel.org/r/b043c59fa79acd06a5f14a1d44dee9e5a3cd1248.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the user specifies a nonexistent field for a hist trigger, the
current code correctly flags that as an error, but doesn't tell the
user what happened.
Fix this by invoking hist_err() with an appropriate message when
nonexistent fields are specified.
Before:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
After:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
ERROR: Couldn't find field: pid
Last command: keys=pid:ts0=common_timestamp.usecs
Link: http://lkml.kernel.org/r/fdc8746969d16906120f162b99dd71c741e0b62c.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The flag-printing code used when displaying hist triggers somehow got
dropped during refactoring of the inter-event patchset. This restores
it.
Below are a couple examples - in the first case, .usecs wasn't being
displayed properly for common_timestamps and the second illustrates
the same for other flags such as .execname.
Before:
# echo 'hist:key=common_pid.execname:val=count:sort=count' > /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
# cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
hist:keys=common_pid:vals=hitcount,count:sort=count:size=2048 [active]
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
After:
# echo 'hist:key=common_pid.execname:val=count:sort=count' > /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
# cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
hist:keys=common_pid.execname:vals=hitcount,count:sort=count:size=2048 [active]
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
Link: http://lkml.kernel.org/r/492bab42ff21806600af98a8ea901af10efbee0c.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Add workqueue forward declaration (for new work, but a nice clean up)
- seftest fixes for the new histogram code
- Print output fix for hwlat tracer
- Fix missing system call events - due to change in x86 syscall naming
- Fix kprobe address being used by perf being hashed
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuIMShQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkrdAQDRrgIGcm4pRGrvPiGhp4FeQKUx3woM
LY10qMYo3St7zwEAn5oor/e/7KQaQSdKQ7QkL690QU2bTO6FXz4VwE1OcgM=
=OHJk
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add workqueue forward declaration (for new work, but a nice clean up)
- seftest fixes for the new histogram code
- Print output fix for hwlat tracer
- Fix missing system call events - due to change in x86 syscall naming
- Fix kprobe address being used by perf being hashed
* tag 'trace-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix missing tab for hwlat_detector print format
selftests: ftrace: Add a testcase for multiple actions on trigger
selftests: ftrace: Fix trigger extended error testcase
kprobes: Fix random address output of blacklist file
tracing: Fix kernel crash while using empty filter with perf
tracing/x86: Update syscall trace events to handle new prefixed syscall func names
tracing: Add missing forward declaration
Caller of uprobe_register is required to keep the inode and containing
mount point referenced.
There was misuse of igrab() in uprobes.c and trace_uprobe.c. This is
because igrab() will not prevent umount of the containing mount point.
To fix this, we added path to struct trace_uprobe, which keeps the inode
and containing mount reference.
For uprobes.c, it is not necessary to call igrab() in uprobe_register(),
as the caller is required to keep the inode reference. The igrab() is
removed and comments on this requirement is added to uprobe_register().
Link: http://lkml.kernel.org/r/CAELBmZB2XX=qEOLAdvGG4cPx4GEntcSnWQquJLUK1ongRj35cA@mail.gmail.com
Link: http://lkml.kernel.org/r/20180423172135.4050588-2-songliubraving@fb.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Howard McLauchlan <hmclauchlan@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As Miklos reported and suggested:
This pattern repeats two times in trace_uprobe.c and in
kernel/events/core.c as well:
ret = kern_path(filename, LOOKUP_FOLLOW, &path);
if (ret)
goto fail_address_parse;
inode = igrab(d_inode(path.dentry));
path_put(&path);
And it's wrong. You can only hold a reference to the inode if you
have an active ref to the superblock as well (which is normally
through path.mnt) or holding s_umount.
This way unmounting the containing filesystem while the tracepoint is
active will give you the "VFS: Busy inodes after unmount..." message
and a crash when the inode is finally put.
Solution: store path instead of inode.
This patch fixes two instances in trace_uprobe.c. struct path is added to
struct trace_uprobe to keep the inode and containing mount point
referenced.
Link: http://lkml.kernel.org/r/20180423172135.4050588-1-songliubraving@fb.com
Fixes: f3f096cfed ("tracing: Provide trace events interface for uprobes")
Fixes: 33ea4b2427 ("perf/core: Implement the 'perf_uprobe' PMU")
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Howard McLauchlan <hmclauchlan@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Revert commits
92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")
As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.
As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:
* systemd kills daemons on resume, after >WatchdogSec seconds
of suspending (Genki Sky). [Verified that that's because systemd uses
CLOCK_MONOTONIC and expects it to not include the suspend time.]
* systemd-journald misbehaves after resume:
systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
(Mike Galbraith).
* NetworkManager reports "networking disabled" and networking is broken
after resume 50% of the time (Pavel). [May be because of systemd.]
* MATE desktop dims the display and starts the screensaver right after
system resume (Pavel).
* Full system hang during resume (me). [May be due to systemd or NM or both.]
That happens on debian and open suse systems.
It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.
Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Kaike reported that in tests rdma hrtimers occasionaly stopped working. He
did great debugging, which provided enough context to decode the problem.
CPU 3 CPU 2
idle
start sched_timer expires = 712171000000
queue->next = sched_timer
start rdmavt timer. expires = 712172915662
lock(baseof(CPU3))
tick_nohz_stop_tick()
tick = 716767000000 timerqueue_add(tmr)
hrtimer_set_expires(sched_timer, tick);
sched_timer->expires = 716767000000 <---- FAIL
if (tmr->expires < queue->next->expires)
hrtimer_start(sched_timer) queue->next = tmr;
lock(baseof(CPU3))
unlock(baseof(CPU3))
timerqueue_remove()
timerqueue_add()
ts->sched_timer is queued and queue->next is pointing to it, but then
ts->sched_timer.expires is modified.
This not only corrupts the ordering of the timerqueue RB tree, it also
makes CPU2 see the new expiry time of timerqueue->next->expires when
checking whether timerqueue->next needs to be updated. So CPU2 sees that
the rdma timer is earlier than timerqueue->next and sets the rdma timer as
new next.
Depending on whether it had also seen the new time at RB tree enqueue, it
might have queued the rdma timer at the wrong place and then after removing
the sched_timer the RB tree is completely hosed.
The problem was introduced with a commit which tried to solve inconsistency
between the hrtimer in the tick_sched data and the underlying hardware
clockevent. It split out hrtimer_set_expires() to store the new tick time
in both the NOHZ and the NOHZ + HIGHRES case, but missed the fact that in
the NOHZ + HIGHRES case the hrtimer might still be queued.
Use hrtimer_start(timer, tick...) for the NOHZ + HIGHRES case which sets
timer->expires after canceling the timer and move the hrtimer_set_expires()
invocation into the NOHZ only code path which is not affected as it merily
uses the hrtimer as next event storage so code pathes can be shared with
the NOHZ + HIGHRES case.
Fixes: d4af6d933c ("nohz: Fix spurious warning when hrtimer and clockevent get out of sync")
Reported-by: "Wan Kaike" <kaike.wan@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: "Marciniszyn Mike" <mike.marciniszyn@intel.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-rdma@vger.kernel.org
Cc: "Dalessandro Dennis" <dennis.dalessandro@intel.com>
Cc: "Fleck John" <john.fleck@intel.com>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Weiny Ira" <ira.weiny@intel.com>
Cc: "linux-rdma@vger.kernel.org"
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804241637390.1679@nanos.tec.linutronix.de
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804242119210.1597@nanos.tec.linutronix.de
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix to clear the percpu metadata_dst that could otherwise carry
stale ip_tunnel_info, from William.
2) Fix that reduces the number of passes in x64 JIT with regards to
dead code sanitation to avoid risk of prog rejection, from Gianluca.
3) Several fixes of sockmap programs, besides others, fixing a double
page_put() in error path, missing refcount hold for pinned sockmap,
adding required -target bpf for clang in sample Makefile, from John.
4) Fix to disable preemption in __BPF_PROG_RUN_ARRAY() paths, from Roman.
5) Fix tools/bpf/ Makefile with regards to a lex/yacc build error
seen on older gcc-5, from John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It's been missing for a while but no one is touching that up. Fix it.
Link: http://lkml.kernel.org/r/20180315060639.9578-1-peterx@redhat.com
CC: Ingo Molnar <mingo@kernel.org>
Cc:stable@vger.kernel.org
Fixes: 7b2c862501 ("tracing: Add NMI tracing in hwlat detector")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
File /sys/kernel/debug/kprobes/blacklist displays random addresses:
[root@s8360046 linux]# cat /sys/kernel/debug/kprobes/blacklist
0x0000000047149a90-0x00000000bfcb099a print_type_x8
....
This breaks 'perf probe' which uses the blacklist file to prohibit
probes on certain functions by checking the address range.
Fix this by printing the correct (unhashed) address.
The file mode is read all but this is not an issue as the file
hierarchy points out:
# ls -ld /sys/ /sys/kernel/ /sys/kernel/debug/ /sys/kernel/debug/kprobes/
/sys/kernel/debug/kprobes/blacklist
dr-xr-xr-x 12 root root 0 Apr 19 07:56 /sys/
drwxr-xr-x 8 root root 0 Apr 19 07:56 /sys/kernel/
drwx------ 16 root root 0 Apr 19 06:56 /sys/kernel/debug/
drwxr-xr-x 2 root root 0 Apr 19 06:56 /sys/kernel/debug/kprobes/
-r--r--r-- 1 root root 0 Apr 19 06:56 /sys/kernel/debug/kprobes/blacklist
Everything in and below /sys/kernel/debug is rwx to root only,
no group or others have access.
Background:
Directory /sys/kernel/debug/kprobes is created by debugfs_create_dir()
which sets the mode bits to rwxr-xr-x. Maybe change that to use the
parent's directory mode bits instead?
Link: http://lkml.kernel.org/r/20180419105556.86664-1-tmricht@linux.ibm.com
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Cc: stable@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.15+
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S Miller <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: acme@kernel.org
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Kernel is crashing when user tries to record 'ftrace:function' event
with empty filter:
# perf record -e ftrace:function --filter="" ls
# dmesg
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
Oops: 0000 [#1] SMP PTI
...
RIP: 0010:ftrace_profile_set_filter+0x14b/0x2d0
RSP: 0018:ffffa4a7c0da7d20 EFLAGS: 00010246
RAX: ffffa4a7c0da7d64 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff8c48ffc968f0
...
Call Trace:
_perf_ioctl+0x54a/0x6b0
? rcu_all_qs+0x5/0x30
...
After patch:
# perf record -e ftrace:function --filter="" ls
failed to set filter "" on event ftrace:function with 22 (Invalid argument)
Also, if user tries to echo "" > filter, it used to throw an error.
This behavior got changed by commit 80765597bc ("tracing: Rewrite
filter logic to be simpler and faster"). This patch restores the
behavior as a side effect:
Before patch:
# echo "" > filter
#
After patch:
# echo "" > filter
bash: echo: write error: Invalid argument
#
Link: http://lkml.kernel.org/r/20180420150758.19787-1-ravi.bangoria@linux.ibm.com
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull networking fixes from David Miller:
1) Fix rtnl deadlock in ipvs, from Julian Anastasov.
2) s390 qeth fixes from Julian Wiedmann (control IO completion stalls,
bad MAC address update sequence, request side races on command IO
timeouts).
3) Handle seq_file overflow properly in l2tp, from Guillaume Nault.
4) Fix VLAN priority mappings in cpsw driver, from Ivan Khoronzhuk.
5) Packet scheduler ife action fixes (malformed TLV lengths, etc.) from
Alexander Aring.
6) Fix out of bounds access in tcp md5 option parser, from Jann Horn.
7) Missing netlink attribute policies in rtm_ipv6_policy table, from
Eric Dumazet.
8) Missing socket address length checks in l2tp and pppoe connect, from
Guillaume Nault.
9) Fix netconsole over team and bonding, from Xin Long.
10) Fix race with AF_PACKET socket state bitfields, from Willem de
Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (51 commits)
ice: Fix insufficient memory issue in ice_aq_manage_mac_read
sfc: ARFS filter IDs
net: ethtool: Add missing kernel doc for FEC parameters
packet: fix bitfield update race
ice: Do not check INTEVENT bit for OICR interrupts
ice: Fix incorrect comment for action type
ice: Fix initialization for num_nodes_added
igb: Fix the transmission mode of queue 0 for Qav mode
ixgbevf: ensure xdp_ring resources are free'd on error exit
team: fix netconsole setup over team
amd-xgbe: Only use the SFP supported transceiver signals
amd-xgbe: Improve KR auto-negotiation and training
amd-xgbe: Add pre/post auto-negotiation phy hooks
pppoe: check sockaddr length in pppoe_connect()
l2tp: check sockaddr length in pppol2tp_connect()
net: phy: marvell: clear wol event before setting it
ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy
bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave
tcp: don't read out-of-bounds opsize
ibmvnic: Clean actual number of RX or TX pools
...
In the case where the socket memory boundary is hit the redirect
path returns an ENOMEM error. However, before checking for this
condition the redirect scatterlist buffer is setup with a valid
page and length. This is never unwound so when the buffers are
released latter in the error path we do a put_page() and clear
the scatterlist fields. But, because the initial error happens
before completing the scatterlist buffer we end up with both the
original buffer and the redirect buffer pointing to the same page
resulting in duplicate put_page() calls.
To fix this simply move the initial configuration of the redirect
scatterlist buffer below the sock memory check.
Found this while running TCP_STREAM test with netperf using Cilium.
Fixes: fa246693a1 ("bpf: sockmap, BPF_F_INGRESS flag for BPF_SK_SKB_STREAM_VERDICT")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In the recvmsg handler we need to add a wait event to support the
blocking use cases. Without this we return zero and may confuse
user applications. In the wait event any data received on the
sk either via sk_receive_queue or the psock ingress list will
wake up the sock.
Fixes: fa246693a1 ("bpf: sockmap, BPF_F_INGRESS flag for BPF_SK_SKB_STREAM_VERDICT")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Relying on map_release hook to decrement the reference counts when a
map is removed only works if the map is not being pinned. In the
pinned case the ref is decremented immediately and the BPF programs
released. After this BPF programs may not be in-use which is not
what the user would expect.
This patch moves the release logic into bpf_map_put_uref() and brings
sockmap in-line with how a similar case is handled in prog array maps.
Fixes: 3d9e952697 ("bpf: sockmap, fix leaking maps with attached but not detached progs")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-21
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a deadlock between mm->mmap_sem and bpf_event_mutex when
one task is detaching a BPF prog via perf_event_detach_bpf_prog()
and another one dumping through bpf_prog_array_copy_info(). For
the latter we move the copy_to_user() out of the bpf_event_mutex
lock to fix it, from Yonghong.
2) Fix test_sock and test_sock_addr.sh failures. The former was
hitting rlimit issues and the latter required ping to specify
the address family, from Yonghong.
3) Remove a dead check in sockmap's sock_map_alloc(), from Jann.
4) Add generated files to BPF kselftests gitignore that were previously
missed, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull timer fixes from Thomas Gleixner:
"A small set of timer fixes:
- Evaluate the -ETIME condition correctly in the imx tpm driver
- Fix the evaluation order of a condition in posix cpu timers
- Use pr_cont() in the clockevents code to prevent ugly message
splitting
- Remove __current_kernel_time() which is now unused to prevent that
new users show up.
- Remove a stale forward declaration"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/imx-tpm: Correct -ETIME return condition check
posix-cpu-timers: Ensure set_process_cpu_timer is always evaluated
timekeeping: Remove __current_kernel_time()
timers: Remove stale struct tvec_base forward declaration
clockevents: Fix kernel messages split across multiple lines
Pull perf fixes from Thomas Gleixner:
"A larger set of updates for perf.
Kernel:
- Handle the SBOX uncore monitoring correctly on Broadwell CPUs which
do not have SBOX.
- Store context switch out type in PERF_RECORD_SWITCH[_CPU_WIDE]. The
percentage of preempting and non-preempting context switches help
understanding the nature of workloads (CPU or IO bound) that are
running on a machine. This adds the kernel facility and userspace
changes needed to show this information in 'perf script' and 'perf
report -D' (Alexey Budankov)
- Remove a WARN_ON() in the trace/kprobes code which is pointless
because the return error code is already telling the caller what's
wrong.
- Revert a fugly workaround for clang BPF targets.
- Fix sample_max_stack maximum check and do not proceed when an error
has been detect, return them to avoid misidentifying errors (Jiri
Olsa)
- Add SPDX idenitifiers and get rid of GPL boilderplate.
Tools:
- Synchronize kernel ABI headers, v4.17-rc1 (Ingo Molnar)
- Support MAP_FIXED_NOREPLACE, noticed when updating the
tools/include/ copies (Arnaldo Carvalho de Melo)
- Add '\n' at the end of parse-options error messages (Ravi Bangoria)
- Add s390 support for detailed/verbose PMU event description (Thomas
Richter)
- perf annotate fixes and improvements:
* Allow showing offsets in more than just jump targets, use the
new 'O' hotkey in the TUI, config ~/.perfconfig
annotate.offset_level for it and for --stdio2 (Arnaldo Carvalho
de Melo)
* Use the resolved variable names from objdump disassembled lines
to make them more compact, just like was already done for some
instructions, like "mov", this eventually will be done more
generally, but lets now add some more to the existing mechanism
(Arnaldo Carvalho de Melo)
- perf record fixes:
* Change warning for missing topology sysfs entry to debug, as not
all architectures have those files, s390 being one of those
(Thomas Richter)
* Remove old error messages about things that unlikely to be the
root cause in modern systems (Andi Kleen)
- perf sched fixes:
* Fix -g/--call-graph documentation (Takuya Yamamoto)
- perf stat:
* Enable 1ms interval for printing event counters values in
(Alexey Budankov)
- perf test fixes:
* Run dwarf unwind on arm32 (Kim Phillips)
* Remove unused ptrace.h include from LLVM test, sidesteping older
clang's lack of support for some asm constructs (Arnaldo
Carvalho de Melo)
* Fixup BPF test using epoll_pwait syscall function probe, to cope
with the syscall routines renames performed in this development
cycle (Arnaldo Carvalho de Melo)
- perf version fixes:
* Do not print info about HAVE_LIBAUDIT_SUPPORT in 'perf version
--build-options' when HAVE_SYSCALL_TABLE_SUPPORT is true, as
libaudit won't be used in that case, print info about
syscall_table support instead (Jin Yao)
- Build system fixes:
* Use HAVE_..._SUPPORT used consistently (Jin Yao)
* Restore READ_ONCE() C++ compatibility in tools/include (Mark
Rutland)
* Give hints about package names needed to build jvmti (Arnaldo
Carvalho de Melo)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs
perf/x86/intel/uncore: Revert "Remove SBOX support for Broadwell server"
coresight: Move to SPDX identifier
perf test BPF: Fixup BPF test using epoll_pwait syscall function probe
perf tests mmap: Show which tracepoint is failing
perf tools: Add '\n' at the end of parse-options error messages
perf record: Remove suggestion to enable APIC
perf record: Remove misleading error suggestion
perf hists browser: Clarify top/report browser help
perf mem: Allow all record/report options
perf trace: Support MAP_FIXED_NOREPLACE
perf: Remove superfluous allocation error check
perf: Fix sample_max_stack maximum check
perf: Return proper values for user stack errors
perf list: Add s390 support for detailed/verbose PMU event description
perf script: Extend misc field decoding with switch out event type
perf report: Extend raw dump (-D) out with switch out event type
perf/core: Store context switch out type in PERF_RECORD_SWITCH[_CPU_WIDE]
tools/headers: Synchronize kernel ABI headers, v4.17-rc1
trace_kprobe: Remove warning message "Could not insert probe at..."
...
One of the classes of kernel stack content leaks[1] is exposing the
contents of prior heap or stack contents when a new process stack is
allocated. Normally, those stacks are not zeroed, and the old contents
remain in place. In the face of stack content exposure flaws, those
contents can leak to userspace.
Fixing this will make the kernel no longer vulnerable to these flaws, as
the stack will be wiped each time a stack is assigned to a new process.
There's not a meaningful change in runtime performance; it almost looks
like it provides a benefit.
Performing back-to-back kernel builds before:
Run times: 157.86 157.09 158.90 160.94 160.80
Mean: 159.12
Std Dev: 1.54
and after:
Run times: 159.31 157.34 156.71 158.15 160.81
Mean: 158.46
Std Dev: 1.46
Instead of making this a build or runtime config, Andy Lutomirski
recommended this just be enabled by default.
[1] A noisy search for many kinds of stack content leaks can be seen here:
https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=linux+kernel+stack+leak
I did some more with perf and cycle counts on running 100,000 execs of
/bin/true.
before:
Cycles: 218858861551 218853036130 214727610969 227656844122 224980542841
Mean: 221015379122.60
Std Dev: 4662486552.47
after:
Cycles: 213868945060 213119275204 211820169456 224426673259 225489986348
Mean: 217745009865.40
Std Dev: 5935559279.99
It continues to look like it's faster, though the deviation is rather
wide, but I'm not sure what I could do that would be less noisy. I'm
open to ideas!
Link: http://lkml.kernel.org/r/20180221021659.GA37073@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove dead code that bails on `attr->value_size > KMALLOC_MAX_SIZE` - the
previous check already bails on `attr->value_size != 4`.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull livepatching fix from Jiri Kosina:
"Shadow variable API list_head initialization fix from Petr Mladek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Allow to call a custom callback when freeing shadow variables
livepatch: Initialize shadow variables safely by a custom callback
Commit a9445e47d8 ("posix-cpu-timers: Make set_process_cpu_timer()
more robust") moved the check into the 'if' statement. Unfortunately,
it did so on the right side of an && which means that it may get short
circuited and never evaluated. This is easily reproduced with:
$ cat loop.c
void main() {
struct rlimit res;
/* set the CPU time limit */
getrlimit(RLIMIT_CPU,&res);
res.rlim_cur = 2;
res.rlim_max = 2;
setrlimit(RLIMIT_CPU,&res);
while (1);
}
Which will hang forever instead of being killed. Fix this by pulling the
evaluation out of the if statement but checking the return value instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1568337
Fixes: a9445e47d8 ("posix-cpu-timers: Make set_process_cpu_timer() more robust")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: "Max R . P . Grossmann" <m@max.pm>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180417215742.2521-1-labbott@redhat.com
Reading file /proc/modules shows the correct address:
[root@s35lp76 ~]# cat /proc/modules | egrep '^qeth_l2'
qeth_l2 94208 1 - Live 0x000003ff80401000
and reading file /sys/module/qeth_l2/sections/.text
[root@s35lp76 ~]# cat /sys/module/qeth_l2/sections/.text
0x0000000018ea8363
displays a random address.
This breaks the perf tool which uses this address on s390
to calculate start of .text section in memory.
Fix this by printing the correct (unhashed) address.
Thanks to Jessica Yu for helping on this.
Fixes: ef0010a309 ("vsprintf: don't use 'restricted_pointer()' when not restricting")
Cc: <stable@vger.kernel.org> # v4.15+
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Convert the clockevents driver from old-style printk() to pr_info() and
pr_cont(), to fix split kernel messages like below:
Clockevents: could not switch to one-shot mode:
dummy_timer is not functional.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lkml.kernel.org/r/1522942018-14471-1-git-send-email-geert%2Brenesas@glider.be
If the get_callchain_buffers fails to allocate the buffer it will
decrease the nr_callchain_events right away.
There's no point of checking the allocation error for
nr_callchain_events > 1. Removing that check.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20180415092352.12403-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The syzbot hit KASAN bug in perf_callchain_store having the entry stored
behind the allocated bounds [1].
We miss the sample_max_stack check for the initial event that allocates
callchain buffers. This missing check allows to create an event with
sample_max_stack value bigger than the global sysctl maximum:
# sysctl -a | grep perf_event_max_stack
kernel.perf_event_max_stack = 127
# perf record -vv -C 1 -e cycles/max-stack=256/ kill
...
perf_event_attr:
size 112
...
sample_max_stack 256
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 4
Note the '-C 1', which forces perf record to create just single event.
Otherwise it opens event for every cpu, then the sample_max_stack check
fails on the second event and all's fine.
The fix is to run the sample_max_stack check also for the first event
with callchains.
[1] https://marc.info/?l=linux-kernel&m=152352732920874&w=2
Reported-by: syzbot+7c449856228b63ac951e@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Cc: x86@kernel.org
Fixes: 97c79a38cd ("perf core: Per event callchain limit")
Link: http://lkml.kernel.org/r/20180415092352.12403-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Return immediately when we find issue in the user stack checks. The
error value could get overwritten by following check for
PERF_SAMPLE_REGS_INTR.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Cc: x86@kernel.org
Fixes: 60e2364e60 ("perf: Add ability to sample machine state on interrupt")
Link: http://lkml.kernel.org/r/20180415092352.12403-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Store preempting context switch out event into Perf trace as a part of
PERF_RECORD_SWITCH[_CPU_WIDE] record.
Percentage of preempting and non-preempting context switches help
understanding the nature of workloads (CPU or IO bound) that are running
on a machine;
The event is treated as preemption one when task->state value of the
thread being switched out is TASK_RUNNING. Event type encoding is
implemented using PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit;
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/9ff84e83-a0ca-dd82-a6d0-cb951689be74@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We might need to do some actions before the shadow variable is freed.
For example, we might need to remove it from a list or free some data
that it points to.
This is already possible now. The user can get the shadow variable
by klp_shadow_get(), do the necessary actions, and then call
klp_shadow_free().
This patch allows to do it a more elegant way. The user could implement
the needed actions in a callback that is passed to klp_shadow_free()
as a parameter. The callback usually does reverse operations to
the constructor callback that can be called by klp_shadow_*alloc().
It is especially useful for klp_shadow_free_all(). There we need to do
these extra actions for each found shadow variable with the given ID.
Note that the memory used by the shadow variable itself is still released
later by rcu callback. It is needed to protect internal structures that
keep all shadow variables. But the destructor is called immediately.
The shadow variable must not be access anyway after klp_shadow_free()
is called. The user is responsible to protect this any suitable way.
Be aware that the destructor is called under klp_shadow_lock. It is
the same as for the contructor in klp_shadow_alloc().
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The existing API allows to pass a sample data to initialize the shadow
data. It works well when the data are position independent. But it fails
miserably when we need to set a pointer to the shadow structure itself.
Unfortunately, we might need to initialize the pointer surprisingly
often because of struct list_head. It is even worse because the list
might be hidden in other common structures, for example, struct mutex,
struct wait_queue_head.
For example, this was needed to fix races in ALSA sequencer. It required
to add mutex into struct snd_seq_client. See commit b3defb791b
("ALSA: seq: Make ioctls race-free") and commit d15d662e89
("ALSA: seq: Fix racy pool initializations")
This patch makes the API more safe. A custom constructor function and data
are passed to klp_shadow_*alloc() functions instead of the sample data.
Note that ctor_data are no longer a template for shadow->data. It might
point to any data that might be necessary when the constructor is called.
Also note that the constructor is called under klp_shadow_lock. It is
an internal spin_lock that synchronizes alloc() vs. get() operations,
see klp_shadow_get_or_alloc(). On one hand, this adds a risk of ABBA
deadlocks. On the other hand, it allows to do some operations safely.
For example, we could add the new structure into an existing list.
This must be done only once when the structure is allocated.
Reported-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This warning message is not very helpful, as the return value should
already show information about the error. Also, this message will
spam dmesg if the user space does testing in a loop, like:
for x in {0..5}
do
echo p:xx xx+$x >> /sys/kernel/debug/tracing/kprobe_events
done
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20180413185513.3626052-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
