Commit Graph

399924 Commits

Author SHA1 Message Date
Fabio Porcedda
905468fa4d net: qmi_wwan: add Telit LE920 newer firmware support
Newer firmware use a new pid and a different interface.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30 15:00:35 -04:00
Eric Dumazet
62748f32d5 net: introduce SO_MAX_PACING_RATE
As mentioned in commit afe4fd0624 ("pkt_sched: fq: Fair Queue packet
scheduler"), this patch adds a new socket option.

SO_MAX_PACING_RATE offers the application the ability to cap the
rate computed by transport layer. Value is in bytes per second.

u32 val = 1000000;
setsockopt(sockfd, SOL_SOCKET, SO_MAX_PACING_RATE, &val, sizeof(val));

To be effectively paced, a flow must use FQ packet scheduler.

Note that a packet scheduler takes into account the headers for its
computations. The effective payload rate depends on MSS and retransmits
if any.

I chose to make this pacing rate a SOL_SOCKET option instead of a
TCP one because this can be used by other protocols.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:35:41 -07:00
Veaceslav Falico
4aa0a03f51 bonding: remove bond_next_slave()
There are no users left, so it's safe to remove.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:28:07 -07:00
Veaceslav Falico
f965084535 bonding: don't use bond_next_slave() in bond_info_seq_next()
We don't need the circular loop there and it's the only current user of
bond_next_slave() - so just use the standard bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:28:06 -07:00
Veaceslav Falico
da8f0919ad bonding: remove unused __get_next_agg()
It has no users, so it's safe to remove it completely.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:28:04 -07:00
Veaceslav Falico
0b08826478 bonding: make bond_3ad_unbind_slave() use bond_for_each_slave()
Convert all instances of

for (agg = __get_first_agg(); agg; agg = __get_next_port)

to the standard bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:28:03 -07:00
Veaceslav Falico
bef1fcce41 bonding: make ad_agg_selection_logic() use bond_for_each_slave()
Convert all instances of

for (agg = __get_first_agg(); agg; agg = __get_next_port)

to the standard bond_for_each_slave(). Also, remove the useless checks
before calling bond_3ad_set_carrier() - if we have something NULL - it
would fire long ago, in __get_first/next_port(), per example.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:28:03 -07:00
Veaceslav Falico
19177e7d55 bonding: make __get_active_agg() use bond_for_each_slave()
Currently we're relying on suboptimal construct

for (; aggregator; aggregator = __get_next_agg(aggregator)) {

where aggregator is an argument of __get_active_agg() which is _always_ the
first slave's aggregator - judging by all the callers, comments in the
ad_agg_selection_logic() and by logic.

Convert it to use the standard bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:28:02 -07:00
Veaceslav Falico
3e36bb75ce bonding: make ad_port_selection_logic() use bond_for_each_slave()
Currently, ad_port_selection_logic() uses

for (aggregator = __get_first_agg(port); aggregator;
     aggregator = __get_next_agg(aggregator)) {

construct, however it's suboptimal, difficult to read and understand.

Change it to a standard bond_for_each_slave(), so that we won't need
__get_first/next_agg() and have it more readable.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:28:01 -07:00
Veaceslav Falico
fe9323dae5 bonding: remove __get_first_port()
Currently we have only one user of it, so it's kind of useless and just
obfusicates things.

Remove it and move the logic to the only user -
bond_3ad_state_machine_handler().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:28:00 -07:00
Veaceslav Falico
3c4c88a138 bonding: remove __get_next_port()
Currently this function is only used in constructs like

for (port = __get_first_port(bond); port; port = __get_next_port(port))

which is basicly the same as

bond_for_each_slave(bond, slave, iter) {
	port = &(SLAVE_AD_INFO(slave).port);

but a more time consuming.

Remove the function and convert the users to bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:27:59 -07:00
Veaceslav Falico
746844931e bonding: verify if we still have slaves in bond_3ad_unbind_slave()
After commit 1f718f0f4f ("bonding: populate
neighbour's private on enslave"), we've moved the unlinking of the slave
to the earliest position possible - so that nobody will see an
half-uninited slave.

However, bond_3ad_unbind_slave() relied that, even while removing the last
slave, it is still accessible - via __get_first_agg() (and, eventually,
bond_first_slave()).

Fix that by verifying if the aggregator return is an actual aggregator, but
not NULL.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:27:33 -07:00
Veaceslav Falico
23c147e026 bonding: correctly verify for the first slave in bond_enslave
After commit 1f718f0f4f ("bonding: populate
neighbour's private on enslave"), we've moved the actual 'linking' in the
end of the function - so that, once linked, the slave is ready to be used,
and is not still in the process of enslaving.

However, 802.3ad verified if it's the first slave by looking at the

if (bond_first_slave(bond) == new_slave)

which, because we've moved the linking to the end, became broken - on the
first slave bond_first_slave(bond) returns NULL.

Fix this by verifying if the prev_slave, that equals bond_last_slave(), is
actually populated - if it is - then it's not the first slave, and vice
versa.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:27:32 -07:00
Yuval Mintz
b91e1a1aa5 bnx2x: use pcie_get_minimum_link()
Use common code for getting the pcie link speed/width for debug printing.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:24:03 -07:00
Yaniv Rosner
7dc950ca59 bnx2x: Add support for EXTPHY2 LED mode
Add new LED mode for the BCM848xx to support new board type.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:24:03 -07:00
Yaniv Rosner
d67710ffcc bnx2x: Change function prototype
Change bnx2x_bsc_read function prototype (more of a cosmetic change).

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:24:01 -07:00
Ariel Elior
9a8130bc38 bnx2x: Don't disable/enable SR-IOV when loading
Current bnx2x implementation controls the number of VFs only by
standard sysfs support, and will reject setting the number of VFs
when the PF is not loaded.
As a result, there is no need to schedule a delayed work to enable
SR-IOV when PF is loaded, as the number of VFs at that point
must be 0.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:24:01 -07:00
Yuval Mintz
75543741f8 bnx2x: Correct VF driver info
When running ethtool on VF interfaces, returning values should indicate
that the interface does not support self-test or register dump.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:23:59 -07:00
Yuval Mintz
bd8e012b5d bnx2x: Test nvram when interface is down
Since commit 3fb43eb ("bnx2x: Change to D3hot only on removal") nvram
is accessible whenever the driver is loaded - Thus it is possible to
test it during self-test even if the interface is down

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:23:58 -07:00
Francesco Fusco
aa66158145 ipv4: processing ancillary IP_TOS or IP_TTL
If IP_TOS or IP_TTL are specified as ancillary data, then sendmsg() sends out
packets with the specified TTL or TOS overriding the socket values specified
with the traditional setsockopt().

The struct inet_cork stores the values of TOS, TTL and priority that are
passed through the struct ipcm_cookie. If there are user-specified TOS
(tos != -1) or TTL (ttl != 0) in the struct ipcm_cookie, these values are
used to override the per-socket values. In case of TOS also the priority
is changed accordingly.

Two helper functions get_rttos and get_rtconn_flags are defined to take
into account the presence of a user specified TOS value when computing
RT_TOS and RT_CONN_FLAGS.

Signed-off-by: Francesco Fusco <ffusco@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:21:52 -07:00
Francesco Fusco
f02db315b8 ipv4: IP_TOS and IP_TTL can be specified as ancillary data
This patch enables the IP_TTL and IP_TOS values passed from userspace to
be stored in the ipcm_cookie struct. Three fields are added to the struct:

- the TTL, expressed as __u8.
  The allowed values are in the [1-255].
  A value of 0 means that the TTL is not specified.

- the TOS, expressed as __s16.
  The allowed values are in the range [0,255].
  A value of -1 means that the TOS is not specified.

- the priority, expressed as a char and computed when
  handling the ancillary data.

Signed-off-by: Francesco Fusco <ffusco@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 15:21:51 -07:00
Nate Levesque
f0e28d48c8 lance: Fix hardcoded interrupt name lp->name to use system device value
The lance interrupt handler was using the hard-coded name which would make it difficult to tell where the interrupt came from. Changed to use the device name that made the interrupt.

Signed-off-by: Nate Levesque <thenaterhood@gmail.com>
Reviewed-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 17:38:32 -04:00
Mihir Singh
307fc4d727 hp100: replace hardcoded name in /proc/interrupts with interface name
The /proc/interrupts file displays hp100, which is not the accepted style. Printing eth%d is more helpful.

Signed-off-by: Mihir Singh <me@mihirsingh.com>
Reviewed-By: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 17:38:32 -04:00
Hannes Frederic Sowa
0a67d3efa4 ipv6: compare sernum when walking fib for /proc/net/ipv6_route as safety net
This patch provides an additional safety net against NULL
pointer dereferences while walking the fib trie for the new
/proc/net/ipv6_route walkers. I never needed it myself and am unsure
if it is needed at all, but the same checks where introduced in
2bec5a369e ("ipv6: fib: fix crash when
changing large fib while dumping it") to fix NULL pointer bugs.

This patch is separated from the first patch to make it easier to revert
if we are sure we can drop this logic.

Cc: Ben Greear <greearb@candelatech.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 17:32:17 -04:00
Hannes Frederic Sowa
8d2ca1d7b5 ipv6: avoid high order memory allocations for /proc/net/ipv6_route
Dumping routes on a system with lots rt6_infos in the fibs causes up to
11-order allocations in seq_file (which fail). While we could switch
there to vmalloc we could just implement the streaming interface for
/proc/net/ipv6_route. This patch switches /proc/net/ipv6_route from
single_open_net to seq_open_net.

loff_t *pos tracks dst entries.

Also kill never used struct rt6_proc_arg and now unused function
fib6_clean_all_ro.

Cc: Ben Greear <greearb@candelatech.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 17:32:16 -04:00
Daniel Mack
6229ed1f22 net: phy: at803x: add suspend/resume callbacks
When WOL is enabled, the chip can't be put into power-down (BMCR_PDOWN)
mode, as that will also switch off the MAC, which consequently leads to
a link loss.

Use BMCR_ISOLATE in that case, which will at least save us some
milliamperes in comparison to normal operation mode.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 17:28:32 -04:00
Daniel Mack
0197ffed86 net: phy: at803x: don't pass function pointers with &
Just a cosmetic cleanup.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 17:28:32 -04:00
David S. Miller
0a325758a8 Merge branch 'qlge'
Jitendra Kalsaria says:

====================
This patch series enhance the handling of nested vlan tags in Rx path.

V2 changes:
* removed module parameter.

V3 changes:
* Users can enable or disable hardware VLAN acceleration using ethtool
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 17:02:24 -04:00
Jitendra Kalsaria
146669a5ab qlge: Update version to 1.00.00.33
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 17:02:20 -04:00
Jitendra Kalsaria
a45adbe8d3 qlge: Enhance nested VLAN (Q-in-Q) handling.
o Adapter doesn’t handle packets with nested VLAN tags in
Rx path. User can turn off VLAN tag stripping in the hardware
and let the stack handle stripping of VLAN tags in the Rx path.

o Users can enable or disable hardware VLAN acceleration using ethtool

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 17:02:20 -04:00
Shahed Shaikh
fac87a8ecd netxen_nic: Update version to 4.0.82
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 13:30:58 -04:00
Shahed Shaikh
5e7856b31d netxen_nic: Print ULA information
This patch reads CAMRAM(0x178) where FW writes a key for ULA and non-ULA
adapter and based on the key, driver logs the message.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 13:30:58 -04:00
David S. Miller
aae8c287e6 Merge branch 'bonding_neighbours'
bonding: use neighbours instead of own lists

Veaceslav Falico says:

====================
This patchset introduces all the needed infrastructure, on top of current
adjacent lists, to be able to remove bond's slave_list/slave->list. The
overhead in memory/CPU is minimal, and after the patchset bonding can rely
on its slave-related functions, given the proper locking. I've done some
netperf benchmarks on a vm, and the delta was about 0.1gbps for 35gbps as a
whole, so no speed fluctuations.

It also automatically creates lower/upper and master symlinks in dev's
sysfs directory.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:19 -04:00
Veaceslav Falico
5831d66e80 net: create sysfs symlinks for neighbour devices
Also, remove the same functionality from bonding - it will be already done
for any device that links to its lower/upper neighbour.

The links will be created for dev's kobject, and will look like
lower_eth0 for lower device eth0 and upper_bridge0 for upper device
bridge0.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:08 -04:00
Veaceslav Falico
842d67a7b3 net: expose the master link to sysfs, and remove it from bond
Currently, we can have only one master upper neighbour, so it would be
useful to create a symlink to it in the sysfs device directory, the way
that bonding now does it, for every device. Lower devices from
bridge/team/etc will automagically get it, so we could rely on it.

Also, remove the same functionality from bonding.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:08 -04:00
Veaceslav Falico
47701a36a3 vlan: unlink the upper neighbour before unregistering
On netdev unregister we're removing also all of its sysfs-associated stuff,
including the sysfs symlinks that are controlled by netdev neighbour code.
Also, it's a subtle race condition - cause we can still access it after
unregistering.

Move the unlinking right before the unregistering to fix both.

CC: Patrick McHardy <kaber@trash.net>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:07 -04:00
Veaceslav Falico
5df27e6cb2 vlan: link the upper neighbour only after registering
Otherwise users might access it without being fully registered, as per
sysfs - it only inits in register_netdevice(), so is unusable till it is
called.

CC: Patrick McHardy <kaber@trash.net>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:07 -04:00
Veaceslav Falico
4fee991a46 bonding: remove slave lists
And all the initialization.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:07 -04:00
Veaceslav Falico
344f329762 bonding: use neighbours for bond_next_slave()
Use the new function __bond_next_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:07 -04:00
Veaceslav Falico
18e1e9bc5d bonding: add __bond_next_slave() which uses neighbours
Add a new function, __bond_next_slave(), which uses neighbours to find the
next slave after the slave provided. It will be further used to gradually
go start using neighbour netdev_adjacent infrastructure instead of
bonding's own lists.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:07 -04:00
Veaceslav Falico
c8c23903f1 bonding: remove bond_prev_slave()
We don't really need it, and it's really hard to RCUify the list->prev.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:07 -04:00
Veaceslav Falico
5a52405a30 bonding: convert first/last slave logic to use neighbours
For that, use netdev_adjacent_get_private(list_head) on bond's lower
neighbour list members. Also, add a small macro - bond_slave_list(bond),
which returns the bond list via neighbour list.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:06 -04:00
Veaceslav Falico
b6ccba4c68 net: add a possibility to get private from netdev_adjacent->list
It will be useful to get first/last element.

CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:06 -04:00
Veaceslav Falico
70039aa7c6 bonding: convert bond_has_slaves() to use the neighbour list
The same way as it was used for its own slave_list.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:06 -04:00
Veaceslav Falico
0965a1f3f8 bonding: add bond_has_slaves() and use it
Currently we verify if we have slaves by checking if bond->slave_list is
empty. Create a define bond_has_slaves() and use it, a bit more readable
and easier to change in the future.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:06 -04:00
Veaceslav Falico
b386c58b85 bonding: remove unused bond_for_each_slave_from()
It has no users, so we can remove it.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:06 -04:00
Veaceslav Falico
4087df87b8 bonding: rework bond_ab_arp_probe() to use bond_for_each_slave()
Currently it uses the hard-to-rcuify bond_for_each_slave_from(), and also
it doesn't check every slave for disrepencies between the actual
IS_UP(slave) and the slave->link == BOND_LINK_UP, but only till we find the
next suitable slave.

Fix this by using bond_for_each_slave() and storing the first good slave in
*before till we find the current_arp_slave, after that we store the first good
slave in new_slave. If new_slave is empty - use the slave stored in before,
and if it's also empty - then we didn't find any suitable slave.

Also, in the meanwhile, check for each slave status.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:06 -04:00
Veaceslav Falico
77140d2951 bonding: rework bond_find_best_slave() to use bond_for_each_slave()
bond_find_best_slave() does not have to be balanced - i.e. return the slave
that is *after* some other slave, but rather return the best slave that
suits, except of bond->primary_slave - in which case we just return it if
it's suitable.

After that we just look through all the slaves and return either first up
slave or the slave whose link came back earliest.

We also don't care about curr_active_slave lock cause we use it in
bond_should_change_active() only and there we take it right away - i.e. it
won't go away.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:05 -04:00
Veaceslav Falico
6475ae4cee bonding: rework rlb_next_rx_slave() to use bond_for_each_slave()
Currently, we're using bond_for_each_slave_from(), which is really hard to
implement under RCU and/or neighbour list.

Remove it and use bond_for_each_slave() instead, taking care of the last
used slave.

Also, rename next_rx_slave to rx_slave and store the current (last)
rx_slave.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:05 -04:00
Veaceslav Falico
c33d78874e bonding: rework bond_3ad_xmit_xor() to use bond_for_each_slave() only
Currently, there are two loops - first we find the first slave in an
aggregator after the xmit_hash_policy() returned number, and after that we
loop from that slave, over bonding head, and till that slave to find any
suitable slave to send the packet through.

Replace it by just one bond_for_each_slave() loop, which first loops
through the requested number of slaves, saving the first suitable one, and
after that we've hit the requested number of slaves to skip - search for
any up slave to send the packet through. If we don't find such kind of
slave - then just send the packet through the first suitable slave found.

Logic remains unchainged, and we skip two loops. Also, refactor it a bit
for readability.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26 16:02:05 -04:00