Teach test_verifier to parse verifier output for insn processed
and compare with expected number.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds a selftest that verifies that a socket listening
on a specific address is chosen in preference over sockets
that listen on any address. The test covers UDP/UDP6/TCP/TCP6.
It is based on, and similar to, reuseport_dualstack.c selftest.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a simple (and stupid) hyperv_cpuid test: check that we got the
expected number of entries with and without Enlightened VMCS enabled
and that all currently reserved fields are zeroed.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case we want to test failing ioctls we need an option to not
fail. Following _vcpu_run() precedent implement _vcpu_ioctl().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two problems with KVM_GET_DIRTY_LOG. First, and less important,
it can take kvm->mmu_lock for an extended period of time. Second, its user
can actually see many false positives in some cases. The latter is due
to a benign race like this:
1. KVM_GET_DIRTY_LOG returns a set of dirty pages and write protects
them.
2. The guest modifies the pages, causing them to be marked ditry.
3. Userspace actually copies the pages.
4. KVM_GET_DIRTY_LOG returns those pages as dirty again, even though
they were not written to since (3).
This is especially a problem for large guests, where the time between
(1) and (3) can be substantial. This patch introduces a new
capability which, when enabled, makes KVM_GET_DIRTY_LOG not
write-protect the pages it returns. Instead, userspace has to
explicitly clear the dirty log bits just before using the content
of the page. The new KVM_CLEAR_DIRTY_LOG ioctl can also operate on a
64-page granularity rather than requiring to sync a full memslot;
this way, the mmu_lock is taken for small amounts of time, and
only a small amount of time will pass between write protection
of pages and the sending of their content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a FID RIF is created for a bridge with IP address, its MAC address
must obey the same requirements as other RIFs. Test that attempts to
change the address incompatibly by attaching a device are vetoed with
extack.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that attempts to change address in a way that violates Spectrum
requirements are vetoed with extack.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b2d35fa5fc ("selftests: add headers_install to lib.mk") added
khdr target to run headers_install target from the main Makefile. The
logic uses KSFT_KHDR_INSTALL and top_srcdir as controls to initialize
variables and include files to run headers_install from the top level
Makefile. There are a few problems with this logic.
1. Exposes top_srcdir to all tests
2. Common logic impacts all tests
3. Uses KSFT_KHDR_INSTALL, top_srcdir, and khdr in an adhoc way. Tests
add "khdr" dependency in their Makefiles to TEST_PROGS_EXTENDED in
some cases, and STATIC_LIBS in other cases. This makes this framework
confusing to use.
The common logic that runs for all tests even when KSFT_KHDR_INSTALL
isn't defined by the test. top_srcdir is initialized to a default value
when test doesn't initialize it. It works for all tests without a sub-dir
structure and tests with sub-dir structure fail to build.
e.g: make -C sparc64/drivers/ or make -C drivers/dma-buf
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make: *** No rule to make target '../../../../scripts/subarch.include'. Stop.
There is no reason to require all tests to define top_srcdir and there is
no need to require tests to add khdr dependency using adhoc changes to
TEST_* and other variables.
Fix it with a consistent use of KSFT_KHDR_INSTALL and top_srcdir from tests
that have the dependency on headers_install.
Change common logic to include khdr target define and "all" target with
dependency on khdr when KSFT_KHDR_INSTALL is defined.
Only tests that have dependency on headers_install have to define just
the KSFT_KHDR_INSTALL, and top_srcdir variables and there is no need to
specify khdr dependency in the test Makefiles.
Fixes: b2d35fa5fc ("selftests: add headers_install to lib.mk")
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <shuah@kernel.org>
Semantic of netns_id argument of bpf_sk_lookup_tcp and bpf_sk_lookup_udp
was changed (fixed) in f71c6143c2. Corresponding changes have to be
applied to all call sites in selftests. The patch fixes corresponding
call sites in test_sock_addr test: pass BPF_F_CURRENT_NETNS instead of 0
in netns_id argument.
Fixes: f71c6143c2 ("bpf: Support sk lookup in netns with id 0")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Joe Stringer <joe@wand.net.nz>
Tested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This Kselftest update for Linux 4.20-rc7 consists of a single fix for
seccomp test from Kees Cook.
-----BEGIN PGP SIGNATURE-----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=bp9r
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"A single fix for a seccomp test from Kees Cook."
* tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/seccomp: Remove SIGSTOP si_pid check
This patch fixes the udmabuf selftest. Currently the selftest is broken.
I fixed the selftest by setting the F_SEAL_SHRINK seal on the memfd
file descriptor which is required by udmabuf and added the test to
the selftest Makefile.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
There is a spelling mistake in the --gettimeleft help text, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Currently for liveness and state pruning the register parentage
chains don't include states of the callee. This makes some sense
as the callee can't access those registers. However, this means
that READs done after the callee returns will not propagate into
the states of the callee. Callee will then perform pruning
disregarding differences in caller state.
Example:
0: (85) call bpf_user_rnd_u32
1: (b7) r8 = 0
2: (55) if r0 != 0x0 goto pc+1
3: (b7) r8 = 1
4: (bf) r1 = r8
5: (85) call pc+4
6: (15) if r8 == 0x1 goto pc+1
7: (05) *(u64 *)(r9 - 8) = r3
8: (b7) r0 = 0
9: (95) exit
10: (15) if r1 == 0x0 goto pc+0
11: (95) exit
Here we acquire unknown state with call to get_random() [1]. Then
we store this random state in r8 (either 0 or 1) [1 - 3], and make
a call on line 5. Callee does nothing but a trivial conditional
jump (to create a pruning point). Upon return caller checks the
state of r8 and either performs an unsafe read or not.
Verifier will first explore the path with r8 == 1, creating a pruning
point at [11]. The parentage chain for r8 will include only callers
states so once verifier reaches [6] it will mark liveness only on states
in the caller, and not [11]. Now when verifier walks the paths with
r8 == 0 it will reach [11] and since REG_LIVE_READ on r8 was not
propagated there it will prune the walk entirely (stop walking
the entire program, not just the callee). Since [6] was never walked
with r8 == 0, [7] will be considered dead and replaced with "goto -1"
causing hang at runtime.
This patch weaves the callee's explored states onto the callers
parentage chain. Rough parentage for r8 would have looked like this
before:
[0] [1] [2] [3] [4] [5] [10] [11] [6] [7]
| | ,---|----. | | |
sl0: sl0: / sl0: \ sl0: sl0: sl0:
fr0: r8 <-- fr0: r8<+--fr0: r8 `fr0: r8 ,fr0: r8<-fr0: r8
\ fr1: r8 <- fr1: r8 /
\__________________/
after:
[0] [1] [2] [3] [4] [5] [10] [11] [6] [7]
| | | | | |
sl0: sl0: sl0: sl0: sl0: sl0:
fr0: r8 <-- fr0: r8 <- fr0: r8 <- fr0: r8 <-fr0: r8<-fr0: r8
fr1: r8 <- fr1: r8
Now the mark from instruction 6 will travel through callees states.
Note that we don't have to connect r0 because its overwritten by
callees state on return and r1 - r5 because those are not alive
any more once a call is made.
v2:
- don't connect the callees registers twice (Alexei: suggestion & code)
- add more details to the comment (Ed & Alexei)
v1: don't unnecessarily link caller saved regs (Jiong)
Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
kernel can provide the func_info and line_info even
it fails the btf_dump_raw_ok() test because they don't contain
kernel address. This patch removes the corresponding '== 0'
test.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Test mapping a VLAN at a port device such that on the same VLAN, there
already is an unoffloadable VXLAN device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test mapping a VLAN at a VXLAN device that can't be offloaded.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add btf annotations to cgroup local storage maps (per-cpu and shared)
in the network packet counting example.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For some reason, my older GCC (< 4.8) isn't smart enough to optimize the
!__builtin_constant_p() branch in bpf_htons, I see:
error: implicit declaration of function '__builtin_bswap16'
Let's use __bpf_constant_htons as suggested by Daniel Borkmann.
I tried to use simple htons, but it produces the following:
test_progs.c:54:17: error: braced-group within expression allowed only
inside a function
.eth.h_proto = htons(ETH_P_IP),
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add command line argument to call and display the results
of ioctl WDIOC_GETTIMELEFT.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Introduce basic testing for both IPv4 and IPv6 multicast. The test creates
an (S,G) type route, sends traffic and verifies traffic arrives when the
route is present and then verifies traffic does not arrive after deleting
the route.
This test requires smcroute - https://github.com/troglobit/smcroute which
is a tool that allows creation of static multicast routes.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f149b31557 ("signal: Never allocate siginfo for SIGKILL or SIGSTOP")
means that the seccomp selftest cannot check si_pid under SIGSTOP anymore.
Since it's believed[1] there are no other userspace things depending on the
old behavior, this removes the behavioral check in the selftest, since it's
more a "extra" sanity check (which turns out, maybe, not to have been
useful to test).
[1] https://lkml.kernel.org/r/CAGXu5jJaZAOzP1qFz66tYrtbuywqb+UN2SOA1VLHpCCOiYvYeg@mail.gmail.com
Reported-by: Tycho Andersen <tycho@tycho.ws>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-12-11
The following pull-request contains BPF updates for your *net-next* tree.
It has three minor merge conflicts, resolutions:
1) tools/testing/selftests/bpf/test_verifier.c
Take first chunk with alignment_prevented_execution.
2) net/core/filter.c
[...]
case bpf_ctx_range_ptr(struct __sk_buff, flow_keys):
case bpf_ctx_range(struct __sk_buff, wire_len):
return false;
[...]
3) include/uapi/linux/bpf.h
Take the second chunk for the two cases each.
The main changes are:
1) Add support for BPF line info via BTF and extend libbpf as well
as bpftool's program dump to annotate output with BPF C code to
facilitate debugging and introspection, from Martin.
2) Add support for BPF_ALU | BPF_ARSH | BPF_{K,X} in interpreter
and all JIT backends, from Jiong.
3) Improve BPF test coverage on archs with no efficient unaligned
access by adding an "any alignment" flag to the BPF program load
to forcefully disable verifier alignment checks, from David.
4) Add a new bpf_prog_test_run_xattr() API to libbpf which allows for
proper use of BPF_PROG_TEST_RUN with data_out, from Lorenz.
5) Extend tc BPF programs to use a new __sk_buff field called wire_len
for more accurate accounting of packets going to wire, from Petar.
6) Improve bpftool to allow dumping the trace pipe from it and add
several improvements in bash completion and map/prog dump,
from Quentin.
7) Optimize arm64 BPF JIT to always emit movn/movk/movk sequence for
kernel addresses and add a dedicated BPF JIT backend allocator,
from Ard.
8) Add a BPF helper function for IR remotes to report mouse movements,
from Sean.
9) Various cleanups in BPF prog dump e.g. to make UAPI bpf_prog_info
member naming consistent with existing conventions, from Yonghong
and Song.
10) Misc cleanups and improvements in allowing to pass interface name
via cmdline for xdp1 BPF example, from Matteo.
11) Fix a potential segfault in BPF sample loader's kprobes handling,
from Daniel T.
12) Fix SPDX license in libbpf's README.rst, from Andrey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use bpf_prog_type instead of bpf_map_type when passing prog_type.
-Wenum-conversion might be unhappy about it:
error: implicit conversion from enumeration type
'enum bpf_map_type' to different enumeration type
'enum bpf_prog_type'
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rename all occurances of *_info_cnt field access
to nr_*_info in tools directory.
The local variables finfo_cnt, linfo_cnt and jited_linfo_cnt
in function do_dump() of tools/bpf/bpftool/prog.c are also
changed to nr_finfo, nr_linfo and nr_jited_linfo to
keep naming convention consistent.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
I get a segfault without it, other fixups always do dereference, and
without dereference I don't understand how it can ever work.
Fixes: 7c85c448e7 ("selftests/bpf: test_verifier, check bpf_map_lookup_elem access in bpf prog")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
I've stumbled over the current macro-expand behaviour of the test
harness:
$ gcc -Wall -xc - <<'__EOF__'
TEST(macro) {
int status = 0;
ASSERT_TRUE(WIFSIGNALED(status));
}
TEST_HARNESS_MAIN
__EOF__
$ ./a.out
[==========] Running 1 tests from 1 test cases.
[ RUN ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != (((signed char) (((status) & 0x7f) + 1) >> 1) > 0) (0)
global.macro: Test terminated by assertion
[ FAIL ] global.macro
[==========] 0 / 1 tests passed.
[ FAILED ]
With this change the output of the same test looks much more
comprehensible:
[==========] Running 1 tests from 1 test cases.
[ RUN ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != WIFSIGNALED(status) (0)
global.macro: Test terminated by assertion
[ FAIL ] global.macro
[==========] 0 / 1 tests passed.
[ FAILED ]
The issue is very similar to the bug fixed in glibc assert(3)
three years ago:
https://sourceware.org/bugzilla/show_bug.cgi?id=18604
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Currently, the destination register is marked as unknown for 32-bit
sub-register move (BPF_MOV | BPF_ALU) whenever the source register type is
SCALAR_VALUE.
This is too conservative that some valid cases will be rejected.
Especially, this may turn a constant scalar value into unknown value that
could break some assumptions of verifier.
For example, test_l4lb_noinline.c has the following C code:
struct real_definition *dst
1: if (!get_packet_dst(&dst, &pckt, vip_info, is_ipv6))
2: return TC_ACT_SHOT;
3:
4: if (dst->flags & F_IPV6) {
get_packet_dst is responsible for initializing "dst" into valid pointer and
return true (1), otherwise return false (0). The compiled instruction
sequence using alu32 will be:
412: (54) (u32) r7 &= (u32) 1
413: (bc) (u32) r0 = (u32) r7
414: (95) exit
insn 413, a BPF_MOV | BPF_ALU, however will turn r0 into unknown value even
r7 contains SCALAR_VALUE 1.
This causes trouble when verifier is walking the code path that hasn't
initialized "dst" inside get_packet_dst, for which case 0 is returned and
we would then expect verifier concluding line 1 in the above C code pass
the "if" check, therefore would skip fall through path starting at line 4.
Now, because r0 returned from callee has became unknown value, so verifier
won't skip analyzing path starting at line 4 and "dst->flags" requires
dereferencing the pointer "dst" which actually hasn't be initialized for
this path.
This patch relaxed the code marking sub-register move destination. For a
SCALAR_VALUE, it is safe to just copy the value from source then truncate
it into 32-bit.
A unit test also included to demonstrate this issue. This test will fail
before this patch.
This relaxation could let verifier skipping more paths for conditional
comparison against immediate. It also let verifier recording a more
accurate/strict value for one register at one state, if this state end up
with going through exit without rejection and it is used for state
comparison later, then it is possible an inaccurate/permissive value is
better. So the real impact on verifier processed insn number is complex.
But in all, without this fix, valid program could be rejected.
>From real benchmarking on kernel selftests and Cilium bpf tests, there is
no impact on processed instruction number when tests ares compiled with
default compilation options. There is slightly improvements when they are
compiled with -mattr=+alu32 after this patch.
Also, test_xdp_noinline/-mattr=+alu32 now passed verification. It is
rejected before this fix.
Insn processed before/after this patch:
default -mattr=+alu32
Kernel selftest
===
test_xdp.o 371/371 369/369
test_l4lb.o 6345/6345 5623/5623
test_xdp_noinline.o 2971/2971 rejected/2727
test_tcp_estates.o 429/429 430/430
Cilium bpf
===
bpf_lb-DLB_L3.o: 2085/2085 1685/1687
bpf_lb-DLB_L4.o: 2287/2287 1986/1982
bpf_lb-DUNKNOWN.o: 690/690 622/622
bpf_lxc.o: 95033/95033 N/A
bpf_netdev.o: 7245/7245 N/A
bpf_overlay.o: 2898/2898 3085/2947
NOTE:
- bpf_lxc.o and bpf_netdev.o compiled by -mattr=+alu32 are rejected by
verifier due to another issue inside verifier on supporting alu32
binary.
- Each cilium bpf program could generate several processed insn number,
above number is sum of them.
v1->v2:
- Restrict the change on SCALAR_VALUE.
- Update benchmark numbers on Cilium bpf tests.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Several conflicts, seemingly all over the place.
I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.
The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.
The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.
cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.
__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy. Or at least I think it was :-)
Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.
The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"A decent batch of fixes here. I'd say about half are for problems that
have existed for a while, and half are for new regressions added in
the 4.20 merge window.
1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach.
2) Revert bogus emac driver change, from Benjamin Herrenschmidt.
3) Handle BPF exported data structure with pointers when building
32-bit userland, from Daniel Borkmann.
4) Memory leak fix in act_police, from Davide Caratti.
5) Check RX checksum offload in RX descriptors properly in aquantia
driver, from Dmitry Bogdanov.
6) SKB unlink fix in various spots, from Edward Cree.
7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from
Eric Dumazet.
8) Fix FID leak in mlxsw driver, from Ido Schimmel.
9) IOTLB locking fix in vhost, from Jean-Philippe Brucker.
10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory
limits otherwise namespace exit can hang. From Jiri Wiesner.
11) Address block parsing length fixes in x25 from Martin Schiller.
12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan.
13) For tun interfaces, only iface delete works with rtnl ops, enforce
this by disallowing add. From Nicolas Dichtel.
14) Use after free in liquidio, from Pan Bian.
15) Fix SKB use after passing to netif_receive_skb(), from Prashant
Bhole.
16) Static key accounting and other fixes in XPS from Sabrina Dubroca.
17) Partially initialized flow key passed to ip6_route_output(), from
Shmulik Ladkani.
18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas
Falcon.
19) Several small TCP fixes (off-by-one on window probe abort, NULL
deref in tail loss probe, SNMP mis-estimations) from Yuchung
Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits)
net/sched: cls_flower: Reject duplicated rules also under skip_sw
bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.
bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.
bnxt_en: Keep track of reserved IRQs.
bnxt_en: Fix CNP CoS queue regression.
net/mlx4_core: Correctly set PFC param if global pause is turned off.
Revert "net/ibm/emac: wrong bit is used for STA control"
neighbour: Avoid writing before skb->head in neigh_hh_output()
ipv6: Check available headroom in ip6_xmit() even without options
tcp: lack of available data can also cause TSO defer
ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output
mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl
mlxsw: spectrum_router: Relax GRE decap matching check
mlxsw: spectrum_switchdev: Avoid leaking FID's reference count
mlxsw: spectrum_nve: Remove easily triggerable warnings
ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes
sctp: frag_point sanity check
tcp: fix NULL ref in tail loss probe
tcp: Do not underestimate rwnd_limited
net: use skb_list_del_init() to remove from RX sublists
...
Some IR remotes have a directional pad or other pointer-like thing that
can be used as a mouse. Make it possible to decode these types of IR
protocols in BPF.
Cc: netdev@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add unit tests for bpf_line_info for both BPF_PROG_LOAD and
BPF_OBJ_GET_INFO_BY_FD.
jit enabled:
[root@arch-fb-vm1 bpf]# ./test_btf -k 0
BTF prog info raw test[5] (line_info (No subprog)): OK
BTF prog info raw test[6] (line_info (No subprog. insn_off >= prog->len)): OK
BTF prog info raw test[7] (line_info (No subprog. zero tailing line_info): OK
BTF prog info raw test[8] (line_info (No subprog. nonzero tailing line_info)): OK
BTF prog info raw test[9] (line_info (subprog)): OK
BTF prog info raw test[10] (line_info (subprog + func_info)): OK
BTF prog info raw test[11] (line_info (subprog. missing 1st func line info)): OK
BTF prog info raw test[12] (line_info (subprog. missing 2nd func line info)): OK
BTF prog info raw test[13] (line_info (subprog. unordered insn offset)): OK
jit disabled:
BTF prog info raw test[5] (line_info (No subprog)): not jited. skipping jited_line_info check. OK
BTF prog info raw test[6] (line_info (No subprog. insn_off >= prog->len)): OK
BTF prog info raw test[7] (line_info (No subprog. zero tailing line_info): not jited. skipping jited_line_info check. OK
BTF prog info raw test[8] (line_info (No subprog. nonzero tailing line_info)): OK
BTF prog info raw test[9] (line_info (subprog)): not jited. skipping jited_line_info check. OK
BTF prog info raw test[10] (line_info (subprog + func_info)): not jited. skipping jited_line_info check. OK
BTF prog info raw test[11] (line_info (subprog. missing 1st func line info)): OK
BTF prog info raw test[12] (line_info (subprog. missing 2nd func line info)): OK
BTF prog info raw test[13] (line_info (subprog. unordered insn offset)): OK
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
1) bpf_load_program_xattr() is absorbing the EBIG error
which makes testing this case impossible. It is replaced
with a direct syscall(__NR_bpf, BPF_PROG_LOAD,...).
2) The test_func_type() is renamed to test_info_raw() to
prepare for the new line_info test in the next patch.
3) The bpf_obj_get_info_by_fd() testing for func_info
is refactored to test_get_finfo(). A new
test_get_linfo() will be added in the next patch
for testing line_info purpose.
4) The test->func_info_cnt is checked instead of
a static value "2".
5) Remove unnecessary "\n" in error message.
6) Adding back info_raw_test_num to the cmd arg such
that a specific test case can be tested, like
all other existing tests.
7) Fix a bug in handling expected_prog_load_failure.
A test could pass even if prog_fd != -1 while
expected_prog_load_failure is true.
8) The min rec_size check should be < 8 instead of < 4.
Fixes: 4798c4ba3b ("tools/bpf: extends test_btf to test load/retrieve func_type info")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ignore any .tap or .xml test result files generated by tdc.
Additionally, ignore plugin symlinks.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In tdc and the valgrind plugin, begin using the TdcResults module
to track executed test cases.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This module includes new classes for tdc to use in keeping track
of test case results, instead of generating and tracking a lengthy
string.
The new module can be extended to support multiple formal
test result formats to be friendlier to automation.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using an attribute set in the tdc_config.py file, limit the
amount of time tdc will wait for an executed command to
complete and prevent the script from hanging entirely.
This timeout will be applied to all executed commands.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are returning thoff from the flow dissector, not the nhoff. Pass
thoff along with nhoff to the bpf program (initially thoff == nhoff)
and expect flow dissector amend/return thoff, not nhoff.
This avoids confusion, when by the time bpf flow dissector exits,
nhoff == thoff, which doesn't make much sense.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
"arsh32 on imm" and "arsh32 on reg" now are accepted. Also added two new
testcases to make sure arsh32 won't be treated as arsh64 during
interpretation or JIT code-gen for which case the high bits will be moved
into low halve that the testcases could catch them.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When using VLAN-aware bridges with VXLAN, the VLAN that is mapped to the
VNI of the VXLAN device is that which is configured as "pvid untagged"
on the corresponding bridge port.
When these flags are toggled or when the VLAN is deleted entirely,
remote hosts should not be able to receive packets from the VTEP.
Add a test case for above mentioned scenarios.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a VXLAN device is attached to an offloaded bridge, or when a
front-panel port is attached to a bridge that already has a VXLAN
device, mlxsw should offload the existing offloadable FDB entries.
Similarly when VXLAN device is downed, the FDB entries are unoffloaded,
and the marks thus need to be cleared. Similarly when a front-panel port
device is attached to a bridge with a VXLAN device, or when VLAN flags
are tweaked on a VXLAN port attached to a VLAN-aware bridge.
Test that the replaying / clearing logic works by observing transitions
in presence of offload marks under different scenarios.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a testsuite dedicated to testing extack propagation and related
functionality.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to info.jited_*, info.func_info could be 0 if
bpf_dump_raw_ok() == false.
This patch makes changes to test_btf and bpftool to expect info.func_info
could be 0.
This patch also makes the needed changes for s/insn_offset/insn_off/.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Construct a "one-armed router" topology and test that packets are
forwarded by the ASIC and that a copy of the packet is sent to the
kernel, which does not forward the packet again.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pathological bpf programs may try to force verifier to explode in
the number of branch states:
20: (d5) if r1 s<= 0x24000028 goto pc+0
21: (b5) if r0 <= 0xe1fa20 goto pc+2
22: (d5) if r1 s<= 0x7e goto pc+0
23: (b5) if r0 <= 0xe880e000 goto pc+0
24: (c5) if r0 s< 0x2100ecf4 goto pc+0
25: (d5) if r1 s<= 0xe880e000 goto pc+1
26: (c5) if r0 s< 0xf4041810 goto pc+0
27: (d5) if r1 s<= 0x1e007e goto pc+0
28: (b5) if r0 <= 0xe86be000 goto pc+0
29: (07) r0 += 16614
30: (c5) if r0 s< 0x6d0020da goto pc+0
31: (35) if r0 >= 0x2100ecf4 goto pc+0
Teach verifier to recognize always taken and always not taken branches.
This analysis is already done for == and != comparison.
Expand it to all other branches.
It also helps real bpf programs to be verified faster:
before after
bpf_lb-DLB_L3.o 2003 1940
bpf_lb-DLB_L4.o 3173 3089
bpf_lb-DUNKNOWN.o 1080 1065
bpf_lxc-DDROP_ALL.o 29584 28052
bpf_lxc-DUNKNOWN.o 36916 35487
bpf_netdev.o 11188 10864
bpf_overlay.o 6679 6643
bpf_lcx_jit.o 39555 38437
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make sure that bpf_prog_test_run_xattr returns the correct length
and that the kernel respects the output size hint. Also check
that errno indicates ENOSPC if there is a short output buffer given.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull RCU changes from Paul E. McKenney:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions
to their vanilla RCU counterparts. This series is a step
towards complete removal of the RCU-bh and RCU-sched update-side
functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for
rcutorture testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein
for a bag-on-head-class bug.
- RCU torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both msg_zerocopy and udpgso_bench have udp zerocopy variants.
Exercise these as part of the standard kselftest run.
With udp, msg_zerocopy has no control channel. Ensure that the
receiver exits after the sender by accounting for the initial
delay in starting them (in msg_zerocopy.sh).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This script tests the support of a VXLAN underlay in a non-default VRF.
It does so by simulating two hypervisors and two VMs, an extended L2
between the VMs with the hypervisors as VTEPs with the underlay in a
VRF, and finally by pinging the two VMs.
It also tests that moving the underlay from a VRF to another works when
down/up the VXLAN interface.
Signed-off-by: Alexis Bauvin <abauvin@scaleway.com>
Reviewed-by: Amine Kherbouche <akherbouche@scaleway.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Amine Kherbouche <akherbouche@scaleway.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pkt_len field in qdisc_skb_cb stores the skb length as it will
appear on the wire after segmentation. For byte accounting, this value
is more accurate than skb->len. It is computed on entry to the TC
layer, so only valid there.
Allow read access to this field from BPF tc classifier and action
programs. The implementation is analogous to tc_classid, aside from
restricting to read access.
To distinguish it from skb->len and self-describe export as wire_len.
Changes v1->v2
- Rename pkt_len to wire_len
Signed-off-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: Vlad Dumitrescu <vladum@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bug.2018.11.12a: Get rid of BUG_ON() and friends
consolidate.2018.12.01a: Continued RCU flavor-consolidation cleanup
doc.2018.11.12a: Documentation updates
fixes.2018.11.12a: Miscellaneous fixes
initrd.2018.11.08b: Automate creation of rcutorture initrd
sil.2018.11.12a: Remove more spin_unlock_wait() calls
Now that synchronize_rcu() waits for preempt-disable regions of code
as well as RCU read-side critical sections, synchronize_sched() can be
replaced by synchronize_rcu(). This commit therefore makes this change,
even though it is but a comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
If a testcase has alignment problems but is expected to be ACCEPT,
verify it using F_NEEDS_EFFICIENT_UNALIGNED_ACCESS too.
Maybe in the future if we add some architecture specific code to elide
the unaligned memory access warnings during the test, we can execute
these as well.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use F_NEEDS_EFFICIENT_UNALIGNED_ACCESS in more tests where the
expected result is REJECT.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make it set the flag argument to bpf_verify_program() which will relax
the alignment restrictions.
Now all such test cases will go properly through the verifier even on
inefficient unaligned access architectures.
On inefficient unaligned access architectures do not try to run such
programs, instead mark the test case as passing but annotate the
result similarly to how it is done now in the presence of this flag.
So, we get complete full coverage for all REJECT test cases, and at
least verifier level coverage for ACCEPT test cases.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Often we want to write tests cases that check things like bad context
offset accesses. And one way to do this is to use an odd offset on,
for example, a 32-bit load.
This unfortunately triggers the alignment checks first on platforms
that do not set CONFIG_EFFICIENT_UNALIGNED_ACCESS. So the test
case see the alignment failure rather than what it was testing for.
It is often not completely possible to respect the original intention
of the test, or even test the same exact thing, while solving the
alignment issue.
Another option could have been to check the alignment after the
context and other validations are performed by the verifier, but
that is a non-trivial change to the verifier.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The message got changed a lot time ago.
This was responsible for 36 test case failures on sparc64.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Ahern and Nicolas Dichtel report that the handling of the netns id
0 is incorrect for the BPF socket lookup helpers: rather than finding
the netns with id 0, it is resolving to the current netns. This renders
the netns_id 0 inaccessible.
To fix this, adjust the API for the netns to treat all negative s32
values as a lookup in the current netns (including u64 values which when
truncated to s32 become negative), while any values with a positive
value in the signed 32-bit integer space would result in a lookup for a
socket in the netns corresponding to that id. As before, if the netns
with that ID does not exist, no socket will be found. Any netns outside
of these ranges will fail to find a corresponding socket, as those
values are reserved for future usage.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test is very similar to its VLAN-unaware counterpart
(vxlan_bridge_1d.sh), but instead of using multiple VLAN-unaware
bridges, a single VLAN-aware bridge is used with multiple VLANs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the existing VLAN-unaware tests with their VLAN-aware
counterparts. This includes sanitization of invalid configuration and
offload indication on the local route performing decapsulation and the
FDB entries perform encapsulation.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous patches add the ability to work with VLAN-aware bridges and
VxLAN devices, so make sure such configuration no longer fails.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The message got changed a lot time ago.
This was responsible for 36 test case failures on sparc64.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
bpf-next 2018-11-30
The following pull-request contains BPF updates for your *net-next* tree.
(Getting out bit earlier this time to pull in a dependency from bpf.)
The main changes are:
1) Add libbpf ABI versioning and document API naming conventions
as well as ABI versioning process, from Andrey.
2) Add a new sk_msg_pop_data() helper for sk_msg based BPF
programs that is used in conjunction with sk_msg_push_data()
for adding / removing meta data to the msg data, from John.
3) Optimize convert_bpf_ld_abs() for 0 offset and fix various
lib and testsuite build failures on 32 bit, from David.
4) Make BPF prog dump for !JIT identical to how we dump subprogs
when JIT is in use, from Yonghong.
5) Rename btf_get_from_id() to make it more conform with libbpf
API naming conventions, from Martin.
6) Add a missing BPF kselftest config item, from Naresh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
While GPL2.0 looks about right, the correct and valid identifiers for GPL v2
only code are 'GPL-2.0' or 'GPL-2.0-only'.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Trivial conflict in net/core/filter.c, a locally computed
'sdif' is now an argument to the function.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cannot cast a u64 to a pointer on 32-bit without an intervening (long)
cast otherwise GCC warns.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following additional unit testcases are added to test_btf:
...
BTF raw test[42] (typedef (invalid name, name_off = 0)): OK
BTF raw test[43] (typedef (invalid name, invalid identifier)): OK
BTF raw test[44] (ptr type (invalid name, name_off <> 0)): OK
BTF raw test[45] (volatile type (invalid name, name_off <> 0)): OK
BTF raw test[46] (const type (invalid name, name_off <> 0)): OK
BTF raw test[47] (restrict type (invalid name, name_off <> 0)): OK
BTF raw test[48] (fwd type (invalid name, name_off = 0)): OK
BTF raw test[49] (fwd type (invalid name, invalid identifier)): OK
BTF raw test[50] (array type (invalid name, name_off <> 0)): OK
BTF raw test[51] (struct type (name_off = 0)): OK
BTF raw test[52] (struct type (invalid name, invalid identifier)): OK
BTF raw test[53] (struct member (name_off = 0)): OK
BTF raw test[54] (struct member (invalid name, invalid identifier)): OK
BTF raw test[55] (enum type (name_off = 0)): OK
BTF raw test[56] (enum type (invalid name, invalid identifier)): OK
BTF raw test[57] (enum member (invalid name, name_off = 0)): OK
BTF raw test[58] (enum member (invalid name, invalid identifier)): OK
...
Fixes: c0fa1b6c3e ("bpf: btf: Add BTF tests")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are two unit test cases, which should encode
TYPEDEF type, but instead encode PTR type.
The error is flagged out after enforcing name
checking in the previous patch.
Fixes: c0fa1b6c3e ("bpf: btf: Add BTF tests")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
CONFIG_FTRACE_SYSCALLS=y is required for get_cgroup_id_user test case
this test reads a file from debug trace path
/sys/kernel/debug/tracing/events/syscalls/sys_enter_nanosleep/id
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Similar to msg_pull_data and msg_push_data add a set of options to
have msg_pop_data() exercised.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add the necessary header definitions to tools for new
msg_pop_data_helper.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Disable BH while holding list spinlock in nf_conncount, from
Taehee Yoo.
2) List corruption in nf_conncount, also from Taehee.
3) Fix race that results in leaving around an empty list node in
nf_conncount, from Taehee Yoo.
4) Proper chain handling for inactive chains from the commit path,
from Florian Westphal. This includes a selftest for this.
5) Do duplicate rule handles when replacing rules, also from Florian.
6) Remove net_exit path in xt_RATEEST that results in splat, from Taehee.
7) Possible use-after-free in nft_compat when releasing extensions.
From Florian.
8) Memory leak in xt_hashlimit, from Taehee.
9) Call ip_vs_dst_notifier after ipv6_dev_notf, from Xin Long.
10) Fix cttimeout with udplite and gre, from Florian.
11) Preserve oif for IPv6 link-local generated traffic from mangle
table, from Alin Nastac.
12) Missing error handling in masquerade notifiers, from Taehee Yoo.
13) Use mutex to protect registration/unregistration of masquerade
extensions in order to prevent a race, from Taehee.
14) Incorrect condition check in tree_nodes_free(), also from Taehee.
15) Fix chain counter leak in rule replacement path, from Taehee.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If pkg-config is available, use it to define the CFLAGS and
LDLIBS needed for libmount; else, use the current hard-coded
paths and options.
Using pkg-config is very helpful for cross-compilation
environments, and is sometimes readily available on developer
boxes to ensure we get the right compiler/linker options for
the given package.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y is required for fw_fallback.sh.
Without it, fw_fallback.sh fails with 'usermode helper disabled so
ignoring test'. Enable the config in selftest so that it gets built by
default.
Signed-off-by: Dan Rue <dan.rue@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
"diff -Z" is used to trim the trailing whitespace when comparing the
loaded firmware file with the source firmware file. However, per the
comment in the source code, -Z should not be necessary. In testing, the
input and output files are identical.
Additionally, -Z is not a standard option and is not available in
environments such as busybox. When -Z is not supported, diff fails with
a usage error, which is suppressed, but then causes read_firmwares() to
exit with a false failure message.
Signed-off-by: Dan Rue <dan.rue@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
s/btf_get_from_id/btf__get_from_id/ to restore the API naming convention.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The selftest test_btf is changed to test both jit and non-jit.
The test result should be the same regardless of whether jit
is enabled or not.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-11-26
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Extend BTF to support function call types and improve the BPF
symbol handling with this info for kallsyms and bpftool program
dump to make debugging easier, from Martin and Yonghong.
2) Optimize LPM lookups by making longest_prefix_match() handle
multiple bytes at a time, from Eric.
3) Adds support for loading and attaching flow dissector BPF progs
from bpftool, from Stanislav.
4) Extend the sk_lookup() helper to be supported from XDP, from Nitin.
5) Enable verifier to support narrow context loads with offset > 0
to adapt to LLVM code generation (currently only offset of 0 was
supported). Add test cases as well, from Andrey.
6) Simplify passing device functions for offloaded BPF progs by
adding callbacks to bpf_prog_offload_ops instead of ndo_bpf.
Also convert nfp and netdevsim to make use of them, from Quentin.
7) Add support for sock_ops based BPF programs to send events to
the perf ring-buffer through perf_event_output helper, from
Sowmini and Daniel.
8) Add read / write support for skb->tstamp from tc BPF and cg BPF
programs to allow for supporting rate-limiting in EDT qdiscs
like fq from BPF side, from Vlad.
9) Extend libbpf API to support map in map types and add test cases
for it as well to BPF kselftests, from Nikita.
10) Account the maximum packet offset accessed by a BPF program in
the verifier and use it for optimizing nfp JIT, from Jiong.
11) Fix error handling regarding kprobe_events in BPF sample loader,
from Daniel T.
12) Add support for queue and stack map type in bpftool, from David.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2018-11-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix an off-by-one bug when adjusting subprog start offsets after
patching, from Edward.
2) Fix several bugs such as overflow in size allocation in queue /
stack map creation, from Alexei.
3) Fix wrong IPv6 destination port byte order in bpf_sk_lookup_udp
helper, from Andrey.
4) Fix several bugs in bpftool such as preventing an infinite loop
in get_fdinfo, error handling and man page references, from Quentin.
5) Fix a warning in bpf_trace_printk() that wasn't catching an
invalid format string, from Martynas.
6) Fix a bug in BPF cgroup local storage where non-atomic allocation
was used in atomic context, from Roman.
7) Fix a NULL pointer dereference bug in bpftool from reallocarray()
error handling, from Jakub and Wen.
8) Add a copy of pkt_cls.h and tc_bpf.h uapi headers to the tools
include infrastructure so that bpftool compiles on older RHEL7-like
user space which does not ship these headers, from Yonghong.
9) Fix BPF kselftests for user space where to get ping test working
with ping6 and ping -6, from Li.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current core-pkey selftest fails if the test runs without privileges to
write into the core pattern file (/proc/sys/kernel/core_pattern). This
causes the test to fail and give the impression that the subsystem being
tested is broken, when, in fact, the test is being executed without the
proper privileges. This is the current error:
test: core_pkey
tags: git_version:v4.19-3-g9e3363be9bce-dirty
Error writing to core_pattern file: Permission denied
failure: core_pkey
This patch simply skips this test if it runs without the proper privileges,
avoiding this undesired failure.
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
CC: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch creates a new macro that skips a test and prints a message to
stderr. This is useful to give an idea why the tests is being skipped,
other than just skipping the test blindly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some ptrace selftests are passing input operands using a constraint that
can allocate any register for the operand, and using these registers on
load/store operations.
If the register allocated by the compiler happens to be zero (r0), it might
cause an invalid memory address access, since load and store operations
consider the content of 0x0 address if the base register is r0, instead of
the content of the r0 register. For example:
r1 := 0xdeadbeef
r0 := 0xdeadbeef
ld r2, 0(1) /* will load into r2 the content of r1 address */
ld r2, 0(0) /* will load into r2 the content of 0x0 */
In order to avoid this possible problem, the inline assembly constraint
should be aware that these registers will be used as a base register, thus,
r0 should not be allocated.
Other than that, this patch removes inline assembly operands that are not
used by the tests.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Packet sockets with PACKET_TX_RING send skbs with user data in frags.
Before commit 5cd8d46ea1 ("packet: copy user buffers before orphan
or clone") ring slots could be released prematurely, possibly allowing
a process to overwrite data still in flight.
This test opens two packet sockets, one to send and one to read.
The sender has a tx ring of one slot. It sends two packets with
different payload, then reads both and verifies their payload.
Before the above commit, both receive calls return the same data as
the send calls use the same buffer. From the commit, the clone
needed for looping onto a packet socket triggers an skb_copy_ubufs
to create a private copy. The separate sends each arrive correctly.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This could be used to rate limit egress traffic in concert with a qdisc
which supports Earliest Departure Time, such as FQ.
Write access from cg skb progs only with CAP_SYS_ADMIN, since the value
will be used by downstream qdiscs. It might make sense to relax this.
Changes v1 -> v2:
- allow access from cg skb, write only with CAP_SYS_ADMIN
Signed-off-by: Vlad Dumitrescu <vladum@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
commit 3327a9c463 ("selftests: add functionals test for UDP GRO")
make use of ipv6 NAT, but such a feature is not currently implied by
selftests. Since the 'ip[6]tables' commands may actually create nft rules,
depending on the specific user-space version, let's pull both NF and
NFT nat modules plus the needed deps.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CHECK message contains a spelling mistake, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a test which checks that the VxLAN driver can learn FDB entries and
that these entries are correctly deleted and aged-out.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test currently expects that a configuration which includes a VxLAN
device with learning enabled to fail.
Previous patches enabled VxLAN learning in mlxsw, so change the test
accordingly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
adding test/example of bpf_map__set_inner_map_fd usage
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Change the bpf programs test_btf_haskv.c and test_btf_nokv.c to
have two sections, and enhance test_btf.c test_file feature
to test btf func_info returned by the kernel.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add additional checks in tools/testing/selftests/bpf and
samples/bpf such that if clang/llvm compiler can generate
BTF sections, do not use pahole.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A two function bpf program is loaded with btf and func_info.
After successful prog load, the bpf_get_info syscall is called
to retrieve prog info to ensure the types returned from the
kernel matches the types passed to the kernel from the
user space.
Several negative tests are also added to test loading/retriving
of func_type info.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds unit tests for BTF_KIND_FUNC_PROTO and
BTF_KIND_FUNC to test_btf.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The device stores flood records in a singly linked list where each
record stores up to three IPv4 addresses of remote VTEPs. The test
verifies that packets are correctly flooded in various cases such as
deletion of a record in the middle of the list.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test various aspects of VxLAN offloading which are specific to mlxsw,
such as sanitization of invalid configurations and offload indication.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This simple wrapper reruns the VXLAN ping test with a port number of
8472.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when decapsulating from VXLAN, the values of inner and outer
TOS are handled appropriately. Because VXLAN driver on its own won't
produce the arbitrary TOS combinations necessary to test this feature,
simply open-code a single ICMP packet and have mausezahn assemble it.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that ECN bits in the VXLAN envelope are correctly deduced from the
overlay packet.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that TOS is inherited from the tunneled packet into the envelope as
configured at the VXLAN device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
