UAPI Changes:
- Document which feature flags belong to which command in virtio_gpu.h
- Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.
Cross-subsystem Changes:
- Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
- Add parameters to the device tree bindings for tfp410
- iommu/io-pgtable: Add ARM Mali midgard MMU page table format
- dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
- Use the 64-bits compare for dma-fence-chains
Core Changes:
- Make the fb conversion functions use __iomem dst.
- Rename drm_client_add to drm_client_register
- Move intel_fb_initial_config to core.
- Add a drm_gem_objects_lookup helper
- Add drm_gem_fence_array helpers, and use it in lima.
- Add drm_format_helper.c to kerneldoc.
Driver Changes:
- Add panfrost driver for mali midgard/bitfrost.
- Converts bochs to use the simple display type.
- Small fixes to sun4i, tinydrm, ti-fp410.
- Fid aspeed's Kconfig options.
- Make some symbols/functions static in lima, sun4i and meson.
- Add a driver for the lg,acx467akm-7 panel.
-----BEGIN PGP SIGNATURE-----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=7Hyr
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-04-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.2:
UAPI Changes:
- Document which feature flags belong to which command in virtio_gpu.h
- Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.
Cross-subsystem Changes:
- Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
- Add parameters to the device tree bindings for tfp410
- iommu/io-pgtable: Add ARM Mali midgard MMU page table format
- dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
- Use the 64-bits compare for dma-fence-chains
Core Changes:
- Make the fb conversion functions use __iomem dst.
- Rename drm_client_add to drm_client_register
- Move intel_fb_initial_config to core.
- Add a drm_gem_objects_lookup helper
- Add drm_gem_fence_array helpers, and use it in lima.
- Add drm_format_helper.c to kerneldoc.
Driver Changes:
- Add panfrost driver for mali midgard/bitfrost.
- Converts bochs to use the simple display type.
- Small fixes to sun4i, tinydrm, ti-fp410.
- Fid aspeed's Kconfig options.
- Make some symbols/functions static in lima, sun4i and meson.
- Add a driver for the lg,acx467akm-7 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/737ad994-213d-45b5-207a-b99d795acd21@linux.intel.com
UAPI Changes:
- uAPI "Fixes:" patch for the upcoming kernel 5.1, included here too
We have an Ack from the media folks (only current user) for this
late tweak
Cross-subsystem Changes:
- ALSA: hda: Fix racy display power access (Takashi, Chris)
Driver Changes:
- DDI and MIPI-DSI clocks fixes for Icelake (Vandita)
- Fix Icelake frequency change/locking (RPS) (Mika)
- Temporarily disable ppGTT read-only bit on Icelake (Mika)
- Add missing Icelake W/As (Mika)
- Enable 12 deep CSB status FIFO on Icelake (Mika)
- Inherit more Icelake code for Elkhartlake (Bob, Jani)
- Handle catastrophic error on engine reset (Mika)
- Shortcut readiness to reset check (Mika)
- Regression fix for GEM_BUSY causing us to report a mixed uabi-class request as not busy (Chris)
- Revert back to max link rate and lane count on eDP (Jani)
- Fix pipe BPP readout for BXT/GLK DSI (Ville)
- Set DP min_bpp to 8*3 for non-RGB output formats (Ville)
- Enable coarse preemption boundaries for Gen8 (Chris)
- Do not enable FEC without DSC (Ville)
- Restore correct BXT DDI latency optim setting calculation (Ville)
- Always reset context's RING registers to avoid running workload twice during reset (Chris)
- Set GPU wedged on driver unload (Janusz)
- Consolidate two similar barries from timeline into one (Chris)
- Only reset the pinned kernel contexts on resume (Chris)
- Wakeref tracking improvements (Chris, Imre)
- Lockdep fixes for shrinker interactions (Chris)
- Bump ready tasks ahead of busywaits in prep of semaphore use (Chris)
- Huge step in splitting display code into fine grained files (Jani)
- Refactor the IRQ init/reset macros for code saving (Paulo)
- Convert IRQ initialization code to uncore MMIO access (Paulo)
- Convert workarounds code to use uncore MMIO access (Chris)
- Nuke drm_crtc_state and use intel_atomic_state instead (Manasi)
- Update SKL clock-gating WA (Radhakrishna, Ville)
- Isolate GuC reset code flow (Chris)
- Expose force_dsc_enable through debugfs (Manasi)
- Header standalone compile testing framework (Jani)
- Code cleanups to reduce driver footprint (Chris)
- PSR code fixes and cleanups (Jose)
- Sparse and kerneldoc updates (Chris)
- Suppress spurious combo PHY B warning (Vile)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418080426.GA6409@jlahtine-desk.ger.corp.intel.com
The cdclk init/uninit code was changed by commit 93a643f29b
("drm/i915/cdclk: have only one init/uninit function") between the
versions of commit 39564ae86d ("drm/i915/ehl: Inherit Ice Lake
conditional code"). What got merged fails to do cdclk init/uninit on
ehl.
Fixes: 39564ae86d ("drm/i915/ehl: Inherit Ice Lake conditional code")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416082852.18141-1-jani.nikula@intel.com
SSEU reprogramming of the context introduced the notion of engine class
and instance for a forwards compatible method of describing any engine
beyond the old execbuf interface. We wish to adopt this class:instance
description for more interfaces, so pull it out into a separate type for
userspace convenience.
Fixes: e46c2e99f6 ("drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Andi Shyti <andi@etezian.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412071416.30097-1-chris@chris-wilson.co.uk
Make them take the uncore argument from the caller instead of passing
the implicit &dev_priv->uncore directly. This will allow us to finally
pass something that's not dev_priv->uncore in the future, and gets rid
of the implicit variables in register macros.
v2: Rebase on top of the newer patches.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-6-paulo.r.zanoni@intel.com
The IRQ initialization helpers are simple and self-contained. Continue
the transition started in the recent uncore rework to get us rid of
I915_READ/WRITE and the implicit dev_priv variables.
While the implicit dev_priv is removed from the IRQ initialization
helpers, we didn't get rid of them in the macro callers. Doing that
should be very simple now.
v2: Rebase on top of the new patches.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-5-paulo.r.zanoni@intel.com
This discussion started because we use token pasting in the
GEN{2,3}_IRQ_INIT and GEN{2,3}_IRQ_RESET macros, so gen2-4 passes an
empty argument to those macros, making the code a little weird. The
original proposal was to just add a comment as the empty argument, but
Ville suggested we just add a prefix to the registers, and that indeed
sounds like a more elegant solution.
Now doing this is kinda against our rules for register naming since we
only add gens or platform names as register prefixes when the given
gen/platform changes a register that already existed before. On the
other hand, we have so many instances of IIR/IMR in comments that
adding a prefix would make the users of these register more easily
findable, in addition to make our token pasting macros actually
readable. So IMHO opening an exception here is worth it.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-4-paulo.r.zanoni@intel.com
Like the gen3+ macros, the gen2 versions of the IRQ initialization
macros take the register name in the 'type' argument. But gen2 only
has one set of registers, so there's really no need to specify the
type. This commit removes the type argument and uses the registers
directly instead of passing them through variables.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-3-paulo.r.zanoni@intel.com
The whole point of having macros here is for the token pasting
necessary to automatically have IMR, IIR and IER selected. We don't
really need or want all the inlining that happens as a consequence.
The good thing about the current code is that it works regardless of
the relative offsets between these registers (they change after gen4,
with the usual VLV/CHV exceptions).
One thing which we can do is to split the logic of what we do with
imr/ier/iir to functions separate from the macros that pick them.
That's what we do in this commit. This allows us to get rid of the
gen8 duplicates and also all the inlining:
add/remove: 2/0 grow/shrink: 0/21 up/down: 384/-5949 (-5565)
Function old new delta
gen3_irq_reset - 233 +233
gen3_irq_init - 151 +151
i8xx_irq_postinstall 459 442 -17
gen11_irq_postinstall 804 744 -60
ironlake_irq_postinstall 450 353 -97
vlv_display_irq_postinstall 348 245 -103
i965_irq_postinstall 378 272 -106
i915_irq_postinstall 333 227 -106
gen8_irq_power_well_post_enable 374 240 -134
ironlake_irq_reset 397 218 -179
vlv_display_irq_reset 616 433 -183
i965_irq_reset 374 180 -194
cherryview_irq_reset 379 185 -194
i915_irq_reset 407 209 -198
ibx_irq_reset 332 133 -199
gen5_gt_irq_postinstall 533 332 -201
gen8_irq_power_well_pre_disable 434 204 -230
gen8_gt_irq_postinstall 469 196 -273
gen8_de_irq_postinstall 1200 836 -364
gen5_gt_irq_reset 471 76 -395
gen8_gt_irq_reset 775 99 -676
gen8_irq_reset 1100 333 -767
gen11_irq_reset 1959 686 -1273
Total: Before=2259222, After=2253657, chg -0.25%
v2:
- Make checkpatch happy with a temporary which_ (Checkpatch).
- Reorder the arguments for the INIT macros (Ville).
- Correctly explain when the register offsets change in the commit
message (Ville).
- Use more line breaks in the macro calls to make the arguments look
a little more organized/readable.
- Update the bloat-o-meter output (minor change only).
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-2-paulo.r.zanoni@intel.com
Since removal of the "missed interrupt detection" nobody used the result
of whether or not we signaled anybody during that invocation, so now
remove the return value.
References: 789659f430 ("drm/i915: Drop fake breadcrumb irq")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416085218.431-1-chris@chris-wilson.co.uk
According to GFX PRM on 01.org, bit 31:16 of mmio 0x22028 should be masks.
Fixes: 1786571393 ("drm/i915/gvt: vGPU context switch")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
with the introduce of "switch to use HWS indices rather than address",
guest GPU hang observed when running workloads which will update the
seqno to the real HW HWSP, not vitural GPU HWSP and then cause GPU hang.
this patch is to revoke index mode in PIPE_CTRL and MI_FLUSH_DW and
patch guest GPU HWSP address value to these commands.
Fixes: 54939ea0bd ("drm/i915: Switch to use HWS indices rather than addresses")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Merge back drm-intel-next for engine name definition refinement
and 54939ea0bd ("drm/i915: Switch to use HWS indices rather than addresses")
that would need gvt fixes to depend on.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This is one of the patches to start replacing drm pointers
and use the intel_atomic_state and intel_crtc to derive
the necessary intel state variables required for the intel
modeset functions.
v3:
* Remove the unwanted newline (Ville)
v2:
* Flip the function arguments (Ville)
* Remove some remaining instances of drm pointers (Ville)
* Use old_crtc_state and new_crtc_state (Ville)
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190415182210.13347-1-manasi.d.navare@intel.com
If the driver is wedged, we can not issue the requests to exercise the
timelines or the system across suspend, so skip the tests. live_hangcheck
is there to fail if we cannot recover.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190413125820.14112-4-chris@chris-wilson.co.uk
Most of the conditional code for ICELAKE also applies to ELKHARTLAKE
so use IS_GEN(dev_priv, 11) even for PM and Workarounds for now.
v2: - Rename commit (Jose)
- Include a wm workaround (Jose and Lucas)
- Include display core init (Jose and Lucas)
v3: Add a missing case of gen greater-than 11 (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412180920.22347-1-rodrigo.vivi@intel.com
If cat error is set, we need to clear it by acking it. Further,
if it is set, we must not do a normal request for reset.
v2: avoid goto (Chris)
v3: comment, error format, direct assign (Chris)
Bspec: 12567
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412165353.16432-1-mika.kuoppala@linux.intel.com
If the engine says it is ready for reset, it is ready
so avoid further dancing and proceed.
v2: reg (Chris)
v3: request, ack, mask from following patch (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412165335.16347-1-mika.kuoppala@linux.intel.com
We are no longer calling bxt_ddi_phy_calc_lane_lat_optim_mask() when
intel{hdmi,dp}_compute_config() succeeds, and instead only call it
when those fail. This is fallout from the bool->int
.compute_config() conversion which failed to invert the return
value check before calling bxt_ddi_phy_calc_lane_lat_optim_mask().
Let's just replace it with an early bailout so that it's harder
to miss.
This restores the correct latency optim setting calculation
(which could fix some real failures), and avoids the
MISSING_CASE() from bxt_ddi_phy_calc_lane_lat_optim_mask()
after intel{hdmi,dp}_compute_config() has failed.
Cc: Lyude Paul <lyude@redhat.com>
Fixes: 204474a6b8 ("drm/i915: Pass down rc in intel_encoder->compute_config()")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109373
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411164925.28491-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
The HW resets it CSB tail pointer on resetting the engine. Most of the
time. In case it doesn't (and for system resume) we write the expected
value anyway. For extra paranoia, flush the write before we invalidate
the cacheline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412110159.10495-1-chris@chris-wilson.co.uk
RMW is used only in the disable path. Using it in enable path
for consistency.
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190330011921.10397-2-radhakrishna.sripada@intel.com
No functional change. Renaming the function to reflect the specific WA.
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190330011921.10397-1-radhakrishna.sripada@intel.com
Currently we enable FEC even when DSC is no used. While that is
theoretically valid supposedly there isn't much of a benefit from
this. But more importantly we do not account for the FEC link
bandwidth overhead (2.4%) in the non-DSC link bandwidth computations.
So the code may think we have enough bandwidth when we in fact
do not.
Cc: stable@vger.kernel.org
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: 240999cf33 ("i915/dp/fec: Add fec_enable to the crtc state.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326144903.6617-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Before causing guc and execlists to diverge further (breaking guc in the
process), take a copy of the current reset procedure and make it local to
the guc submission backend
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411130515.20716-1-chris@chris-wilson.co.uk
On gen11 writing to read only ppgtt page causes a gpu hang.
This behaviour is different than with previous gen where
read only ppgtt access is supported. On those, the write
is just dropped without visible side effects.
Disable ro ppgtt support on gen11 until a solution can
be found to bring it into line with its predecessors.
References: HSDES#1807136187
References: https://bugzilla.freedesktop.org/show_bug.cgi?id=108569
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411083034.28311-1-mika.kuoppala@linux.intel.com
As i915_requests are put into an RCU-freelist, they may get reused
before debugobjects notice them as being freed. On cleanup, explicitly
call i915_sw_fence_fini() so that the debugobject is properly tracked.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: b7404c7ecb ("drm/i915: Bump ready tasks ahead of busywaits")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411122445.20060-1-chris@chris-wilson.co.uk
No point in duplicating all this code when we can just
use a variable to hold the output bpp (the only thing
that differs between the two branches).
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.comk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326144903.6617-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
It is generic code and having it in the helper will let other drivers
benefit from it.
One change was necessary assuming this to be true:
INTEL_INFO(dev_priv)->num_pipes == dev->mode_config.num_crtc
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190407165243.54043-4-noralf@tronnes.org
Now when we can support variable csb fifo sizes, disable legacy mode.
By disabling legacy we hope to get better hw testing coverage by
assuming everyone else have switched over.
v2: rebase
References: https://bugs.freedesktop.org/show_bug.cgi?id=110338
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Kelvin Gardiner <kelvin.gardiner@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405204657.12887-2-chris@chris-wilson.co.uk
Make csb entry count variable in preparation for larger
CSB status FIFO size found on gen11+ hardware.
v2: adapt to hwsp access only (Chris)
non continuous mmio (Daniele)
v3: entries (Chris), fix macro for checkpatch
v4: num_entries (Chris)
v5: consistency on num_entries
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405204657.12887-1-chris@chris-wilson.co.uk
With gen11 the interrupt registers are shared between 2 engines,
with Engine1 instance being upper word and Engine0 instance being
lower. Annoyingly gen11 selected the pm interrupts to be in the
Engine1 instance.
Rectify the situation by shifting the access accordingly,
based on gen.
v2: comments, warn on overzealous rps_events
Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=108059
Testcase: igt/i915_pm_rps@min-max-config-loaded
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410105923.18546-6-mika.kuoppala@linux.intel.com
There is no video turbo mode for gen11, so don't set it.
v2: inline (Chris)
v3: brackets (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410132436.23679-1-mika.kuoppala@linux.intel.com
On gen11 the recommended rc6 threshold differs from previous
gens, apply it. Move the write to a correct spot in sequence.
v2: do write in 2b, fix bspec ref (Michal)
Bspec: 33149
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410105923.18546-2-mika.kuoppala@linux.intel.com
Consider two tasks that are running in parallel on a pair of engines
(vcs0, vcs1), but then must complete on a shared engine (rcs0). To
maximise throughput, we want to run the first ready task on rcs0 (i.e.
the first task that completes on either of vcs0 or vcs1). When using
semaphores, however, we will instead queue onto rcs in submission order.
To resolve this incorrect ordering, we want to re-evaluate the priority
queue when each of the request is ready. Normally this happens because
we only insert into the priority queue requests that are ready, but with
semaphores we are inserting ahead of their readiness and to compensate
we penalize those tasks with reduced priority (so that tasks that do not
need to busywait should naturally be run first). However, given a series
of tasks that each use semaphores, the queue degrades into submission
fifo rather than readiness fifo, and so to counter this we give a small
boost to semaphore users as their dependent tasks are completed (and so
we no longer require any busywait prior to running the user task as they
are then ready themselves).
v2: Fixup irqsave for schedule_lock (Tvrtko)
Testcase: igt/gem_exec_schedule/semaphore-codependency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409152922.23894-1-chris@chris-wilson.co.uk
When fb is tiled and fb->height isn't the multiple of tile's height,
the format fb->size = fb->stride * fb->height, will get a smaller size
than the actual size. As the memory height of tiled fb should be multiple
of tile's height.
Fixes: 7f1a93b1f1 ("drm/i915/gvt: Correct the calculation of plane size")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
On resume, we know that the only pinned contexts in danger of seeing
corruption are the kernel context, and so we do not need to walk the
list of all GEM contexts as we tracked them on each engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410190120.830-1-chris@chris-wilson.co.uk
Currently we use force_dsc_enable to force DSC from IGT, but
we dont expose this value to userspace through debugfs.
This patch exposes this through the same dsc_fec_support
debugfs node per connector so that we can restore its value
back after the tests are completed.
Suggested-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405224821.32435-1-manasi.d.navare@intel.com
Commit 7769db5883 ("drm/i915/dp: optimize eDP 1.4+ link config fast
and narrow") started to optize the eDP 1.4+ link config, both per spec
and as preparation for display stream compression support.
Sadly, we again face panels that flat out fail with parameters they
claim to support. Revert, and go back to the drawing board.
v2: Actually revert to max params instead of just wide-and-slow.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109959
Fixes: 7769db5883 ("drm/i915/dp: optimize eDP 1.4+ link config fast and narrow")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.0+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Albert Astals Cid <aacid@kde.org> # v5.0 backport
Tested-by: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport
Tested-by: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405075220.9815-1-jani.nikula@intel.com
(cherry picked from commit f11cb1c19a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
