The way we load the firmwares is the same for both GuC and HuC, the only
difference is in the wopcm destination address and the dma flags, so we
easily can move the logic to a common function and pass in offset and
flags. The only other difference in the uplaod path are some the extra
steps that guc does before and after the xfer, but those don't require
the guc fw to be pinned in ggtt and can safely be performed before
calling the uc_upload function.
Note that this patch re-introduces the dma xfer wait for guc loading that
was removed with "drm/i915/guc: Propagate the fw xfer timeout". This is
not going to slow us down on a successful load (the dma has to complete
before fw init can start), but could slightly increase the timeout in case
of a fw init error.
v2: use _fw variants for uncore accesses (Chris), fix guc_fw status on
failed wait.
v3: use dev_err and print DMA_CTRL (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-9-daniele.ceraolospurio@intel.com
The gt is our new central structure for uc-related code, so we can use
that instead of jumping back to i915 via the fw object. Since we have it
in the upload function it is easy to pass it through the lower levels of
the xfer process instead of continuosly jumping via uc_fw->uc->gt, which
will also make things a bit cleaner for the next patch.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-8-daniele.ceraolospurio@intel.com
The binary is perma-pinned and the rsa is not going to change, so copy
it only once and not on every load.
v2: onion unwind (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-7-daniele.ceraolospurio@intel.com
The way we copy the RSA is the same for GuC and HuC, so we can move the
logic in a common function. this will also make any update needed for
local memory easier.
v2: return the number of copied bytes and check it (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-6-daniele.ceraolospurio@intel.com
We currently track fetch and load status separately, but the 2 are
actually sequential in the uc lifetime (fetch must complete before we
can attempt the load!). Unifying the 2 variables we can better follow
the sequential states and improve our trackng of the uC state.
Also, sprinkle some GEM_BUG_ON to make sure we transition correctly
between states.
v2: rename states, add the running state (Michal), drop some logs in
the fetch path (Michal, Chris)
v3: re-rename states, extend early status check to all helpers (Michal)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-5-daniele.ceraolospurio@intel.com
Instead of having 2 identical functions for GuC and HuC firmware
selection, we can unify the selection logic and just use different lists
based on FW type.
Note that the revid is not relevant for current blobs, but the upcoming
CML will be identified as CFL rev 5, so by considering the revid we're
ready for that.
v2: rework blob list defs (Michal), add order check (Chris), fuse GuC
and HuC lists into one.
v3: remove difference between no uC HW and no uC FW, simplify related
selection code, check the whole fw list (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v2
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-4-daniele.ceraolospurio@intel.com
There are 2 issues around handling of missing uC support:
- We treat lack of uC HW and lack of uC FW definition as 2 different
cases, but both of them mean that we don't support the uC on the
platform we're running on.
- We rely on the modparam to decide if we can take uC paths or not, but
we don't sanitize it if it is set incorrectly on platform with no uC
support.
To fix both of them, unify the 2 cases in a single one and sanitize the
modparam on invalid configuration (after printing an error message).
The log has been adapted as well, since the user doesn't care why we
don't support GuC/HuC (no HW or no FW), just that we do not. Developers
can easily find the answer based on the platform, so we can simplify the
log.
Correcting the modparam has been preferred over failing the load since
this is what we usually do for non-supported feature (e.g. the now gone
enable_ppgtt would fall back to the highest supported PPGTT mode if the
selected one was not available).
Note that this patch purposely doesn't change the behavior for platforms
that do have uC support, in which case we will still fail if enable_guc
is set and the firmware is not available on the system.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-3-daniele.ceraolospurio@intel.com
We have several HAS_* checks for GuC and HuC but we mostly use HAS_GUC
and HAS_HUC, with only 1 exception. Since our HW always has either
both uC or neither of them, just replace all the checks with a unified
HAS_UC.
v2: use HAS_GT_UC (Michal)
v3: fix comment (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-2-daniele.ceraolospurio@intel.com
All the GuC objects are perma-pinned, so their offset can't change at
runtime. We can therefore set (and log!) the parameters only once during
boot.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724085849.18047-1-chris@chris-wilson.co.uk
Fix botched refactoring of the code that uncorrectly split a check on a
bool, treating it as a u32.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 84b1ca2f0e ("drm/i915/uc: prefer intel_gt over i915 in GuC/HuC paths")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723153733.19401-1-daniele.ceraolospurio@intel.com
If the system is already idle, omit the GEM_TRACE saying we are about to
wait for idle. It looks confusing in the logs to see a continual stream
of wait-for-idle, as one immediately assumes it is stuck in a loop.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091218.5886-1-chris@chris-wilson.co.uk
The microcontrollers are part of GT so it makes logical sense to have
them sanitized at the same time. This also fixed an issue with our
status tracking where the FW load status is not reset around
hibernation.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091404.6449-2-chris@chris-wilson.co.uk
This was the last place in gt/uc that was still using I915_READ
with the global dev_priv.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091404.6449-1-chris@chris-wilson.co.uk
To identify the HDCP capability of the display connected to CI
systems, we need to add the hdcp capability probing in i915_display_info.
This will also help to populate the HDCP capability of the CI systems
to CI H/W logs maintained at https://intel-gfx-ci.01.org/hardware/.
It will facilitate to determine the kms_content_protection behavior on
a particular CI system.
v2: Reused the intel_hdcp_info() in i915_hdcp_sink_capability_show(). [Ram]
Shifted intel_hdcp_info() to the end of intel_dp_info. [Ram]
v3: used seq_puts() instead of seq_pritnf(). [Ram]
Cc: daniel.vetter@intel.com
Cc: ramalingam.c@intel.com
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719055513.2089-1-anshuman.gupta@intel.com
Trust that we now have adequate protection over the low level structures
via the engine->active.lock to allow ourselves to capture the GPU error
state without the heavy hammer of stop_machine(). Sadly this does mean
that we have to forgo some of the lesser used information (not derived
from the active state) that is not controlled by the active locks. This
includes the list of buffers in the ppGTT and pinned globally in the
GGTT. Originally this was used to manually verify relocations, but
hasn't been required for sometime and modern mesa now has the habit of
ensuring that all interesting buffers within a batch are captured in their
entirety (that are the auxiliary state buffers, but not the textures).
A useful side-effect is that this allows us to restore error capturing
for Braswell and Broxton.
v2: Use pagevec for a typical arbitrary number of preallocated pages
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722222847.24178-1-chris@chris-wilson.co.uk
Prior to freeing the struct, call the fini function to cleanup the
common members. Currently this only calls the debug functions to mark
the structs as destroyed, but may be extended to real work in future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718070024.21781-2-chris@chris-wilson.co.uk
Remove the outer layer cleanup of engine stubs; as i915_drv itself no
longer tries to preallocate and so is not responsible for either the
allocation or free. By the time we call the cleanup function, we already
have cleaned up the engines.
v2: Lack of symmetry between mmio_probe and mmio_release for handling
the error cleanup. engine->destroy() is a compound function that is
called earlier in the normal release as it ties together other bits of
state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718070024.21781-6-chris@chris-wilson.co.uk
The top-level page directory for 36b is a single entry, not multiple
like 32b. Fix up the rounding on the calculation of the size of the top
level so that we populate the 4th level correctly for 36b.
Reported-by: Jose Souza <jose.souza@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 1eda701eac ("drm/i915/gtt: Recursive cleanup for gen8")
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719130737.5835-1-chris@chris-wilson.co.uk
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/i915/display/icl_dsi.c: In function 'gen11_dsi_set_transcoder_timings':
drivers/gpu/drm/i915/display/icl_dsi.c:768:6: warning:
variable 'hfront_porch' set but not used [-Wunused-but-set-variable]
It is never used and can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719015136.103988-1-yuehaibing@huawei.com
When __gen8_ppgtt_alloc fails without allocating anything
we should not try to call __gen8_ppgtt_clear as there is
nothing to clear and underlying code will complain with:
[ 157.861645] gen8_pd_range:881 GEM_BUG_ON(start >= end)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719153322.10464-1-michal.wajdeczko@intel.com
Since the underlying __gen8_ppgtt_clear takes the shifted address, we
must remember to provide it with the shifted original start address.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719131524.827-1-chris@chris-wilson.co.uk
This reverts commit f774f09649.
If GuC firmware is not present on the filesystem driver crashes the
machine on boot.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: f774f09649 ("drm/i915/guc: Turn on GuC/HuC auto mode")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190719094845.6242-2-tvrtko.ursulin@linux.intel.com
Access to 0xb100 - 0xb3ff mmio range is controlled by the MCR selector
which only affects CPU MMIO. Therefore these registers cannot be realiably
read with MI_SRM from the command streamer so skip their verification.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-5-tvrtko.ursulin@linux.intel.com
A couple issues were present in this code:
1.
fls() usage was incorrect causing off by one in subslice mask lookup,
which in other words means subslice mask of all zeroes is always used
(subslice mask of a slice which is not present, or even out of bounds
array access), rendering the checks in wa_init_mcr either futile or
random.
2.
Condition in WARN_ON was not correct. It is doing a bitwise and operation
between a positive (present subslices) and negative mask (disabled L3
banks).
This means that with corrected fls() usage the assert would always
incorrectly fail.
We could fix this by inverting the fuse bits in the check, but instead do
one better and improve the code so it not only asserts, but finds the
first common index between the two masks and only warns if no such index
can be found.
v2:
* Simplify check for logic and redability.
* Improve commentary explaining what is really happening ie. what the
assert is really trying to check and why.
v3:
* Find first common index instead of just asserting.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: fe864b76c2 ("drm/i915: Implement WaProgramMgsrForL3BankSpecificMmioReads")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-4-tvrtko.ursulin@linux.intel.com
Instead of re-calculating the MCR selector in read_subslice_reg do the
rwm on its existing value and restore it when done.
This consolidates MCR programming to one place for cnl+, and avoids
re-calculating its default value on older platforms during hangcheck.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-3-tvrtko.ursulin@linux.intel.com
fls returns bit positions starting from one for the lsb and the MCR
register expects zero based (sub)slice addressing.
Incorrent MCR programming can have the effect of directing MMIO reads of
registers in the 0xb100-0xb3ff range to invalid subslice returning zeroes
instead of actual content.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1e40d4aea5 ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-2-tvrtko.ursulin@linux.intel.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/i915/display/intel_sprite.c: In function 'g4x_sprite_check_scaling':
drivers/gpu/drm/i915/display/intel_sprite.c:1494:13: warning:
variable 'src_y' set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719024100.64738-1-yuehaibing@huawei.com
As we unwind the requests for a preemption event, we return a virtual
request back to its original virtual engine (so that it is available for
execution on any of its siblings). In the process, this means that its
breadcrumb should no longer be associated with the original physical
engine, and so we are forced to decouple it. Previously, as the request
could not complete without our awareness, we would move it to the next
real engine without any danger. However, preempt-to-busy allowed for
requests to continue on the HW and complete in the background as we
unwound, which meant that we could end up retiring the request before
fixing up the breadcrumb link.
[51679.517943] INFO: trying to register non-static key.
[51679.517956] the code is fine but needs lockdep annotation.
[51679.517960] turning off the locking correctness validator.
[51679.517966] CPU: 0 PID: 3270 Comm: kworker/u8:0 Tainted: G U 5.2.0+ #717
[51679.517971] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[51679.518012] Workqueue: i915 retire_work_handler [i915]
[51679.518017] Call Trace:
[51679.518026] dump_stack+0x67/0x90
[51679.518031] register_lock_class+0x52c/0x540
[51679.518038] ? find_held_lock+0x2d/0x90
[51679.518042] __lock_acquire+0x68/0x1800
[51679.518047] ? find_held_lock+0x2d/0x90
[51679.518073] ? __i915_sw_fence_complete+0xff/0x1c0 [i915]
[51679.518079] lock_acquire+0x90/0x170
[51679.518105] ? i915_request_cancel_breadcrumb+0x29/0x160 [i915]
[51679.518112] _raw_spin_lock+0x27/0x40
[51679.518138] ? i915_request_cancel_breadcrumb+0x29/0x160 [i915]
[51679.518165] i915_request_cancel_breadcrumb+0x29/0x160 [i915]
[51679.518199] i915_request_retire+0x43f/0x530 [i915]
[51679.518232] retire_requests+0x4d/0x60 [i915]
[51679.518263] i915_retire_requests+0xdf/0x1f0 [i915]
[51679.518294] retire_work_handler+0x4c/0x60 [i915]
[51679.518301] process_one_work+0x22c/0x5c0
[51679.518307] worker_thread+0x37/0x390
[51679.518311] ? process_one_work+0x5c0/0x5c0
[51679.518316] kthread+0x116/0x130
[51679.518320] ? kthread_create_on_node+0x40/0x40
[51679.518325] ret_from_fork+0x24/0x30
[51679.520177] ------------[ cut here ]------------
[51679.520189] list_del corruption, ffff88883675e2f0->next is LIST_POISON1 (dead000000000100)
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716124931.5870-4-chris@chris-wilson.co.uk
A single 32-bit PSR2 training pattern field follows the sixteen element
array of PSR table entries in the VBT spec. But, we incorrectly define
this PSR2 field for each of the PSR table entries. As a result, the PSR1
training pattern duration for any panel_type != 0 will be parsed
incorrectly. Secondly, PSR2 training pattern durations for VBTs with bdb
version >= 226 will also be wrong.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org #v5.2
Fixes: 88a0d9606a ("drm/i915/vbt: Parse and use the new field with PSR2 TP2/3 wakeup time")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111088
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204183
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: François Guerraz <kubrick@fgv6.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717223451.2595-1-dhinakaran.pandiyan@intel.com
As recently disovered by forcing big-core (!llc) machines to use the GTT
paths, we need our full GTT write flush before manipulating the GTT PTE
or else the writes may be directed to the wrong page.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145407.21352-2-chris@chris-wilson.co.uk
On VLV/CHV there is some kind of linkage between the cdclk frequency
and the DP link frequency. The spec says:
"For DP audio configuration, cdclk frequency shall be set to
meet the following requirements:
DP Link Frequency(MHz) | Cdclk frequency(MHz)
270 | 320 or higher
162 | 200 or higher"
I suspect that would more accurately be expressed as
"cdclk >= DP link clock", and in any case we can express it like
that in the code because of the limited set of cdclk (200, 266,
320, 400 MHz) and link frequencies (162 and 270 MHz) we support.
Without this we can end up in a situation where the cdclk
is too low and enabling DP audio will kill the pipe. Happens
eg. with 2560x1440 modes where the 266MHz cdclk is sufficient
to pump the pixels (241.5 MHz dotclock) but is too low for
the DP audio due to the link frequency being 270 MHz.
v2: Spell out the cdclk and link frequencies we actually support
Cc: stable@vger.kernel.org
Tested-by: Stefan Gottwald <gottwald@igel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111149
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717114536.22937-1-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Although, DPLL4 enable and disable is associated with MGPLL1_ENABLE
register, we can use ICL_DPLL_CFGCR0/CR1 macros to access this dpll's
CR0 and CR1 registers by passing an id of 4 to these macros.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717021316.18610-1-vivek.kasireddy@intel.com
Push the engine stop into the back reset_prepare (where it already was!)
This allows us to avoid dangerously setting the RING registers to 0 for
logical contexts. If we clear the register on a live context, those
invalid register values are recorded in the logical context state and
replayed (with hilarious results).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716124931.5870-2-chris@chris-wilson.co.uk
By stopping the rings, we may trigger an arbitration point resulting in
a premature context-switch (i.e. a completion event before the request
is actually complete). This clears the active context before the reset,
but we must remember to rewind the incomplete context for replay upon
resume.
Fixes: 1863e3020a ("drm/i915/execlists: Always reset the context's RING registers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716124931.5870-3-chris@chris-wilson.co.uk
Commit f774f09649 ("drm/i915/guc: Turn on GuC/HuC auto mode") changed
the default from 0 to -1 but forgot to update the description.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: f774f09649 ("drm/i915/guc: Turn on GuC/HuC auto mode")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717104418.23809-1-tvrtko.ursulin@linux.intel.com
Avoid a global idle barrier by reconfiguring each context by rewriting
them with MI_STORE_DWORD from the kernel context.
v2: We only need to determine the desired register values once, they are
the same for all contexts.
v3: Don't remove the kernel context from the list of known GEM contexts;
the world is not ready for that yet.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716213443.9874-1-chris@chris-wilson.co.uk
Preempt-to-busy uses a GPU semaphore to enforce an idle-barrier across
preemption, but mediated gvt does not fully support semaphores.
v2: Fiddle around with the flags and settle on using has-semaphores for
the core bits so that we retain the ability to preempt our own
semaphores.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Xiaolin Zhang <xiaolin.zhang@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709091233.8573-1-chris@chris-wilson.co.uk
We cannot let the request be retired and freed while we are trying to
dump it during error capture. It is not sufficient just to grab a
reference to the request, as during retirement we may free the ring
which we are also dumping. So take the engine lock to prevent retiring
and freeing of the request.
Reported-by: Alex Shumsky <alexthreed@gmail.com>
Fixes: 83c317832e ("drm/i915: Dump the ringbuffer of the active request for debugging")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Alex Shumsky <alexthreed@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190715080946.15593-6-chris@chris-wilson.co.uk
Right now we are aware of two cases that needs another hotplug retry:
- Unpowered type-c dongles
- HDMI slow unplug
Both have a complete explanation in the code to schedule another run
of the hotplug handler.
It could have more checks to just trigger the retry in those two
specific cases but why would sink signal a long pulse if there is
no change? Also the drawback of running the hotplug handler again
is really low and that could fix another cases that we are not
aware.
Also retrying for old DP ports(non-DDI) to make it consistent and not
cause CI failures if those systems are connected to chamelium boards
that will be used to simulate the issues reported in here.
v2: Also retrying for old DP ports(non-DDI)(Imre)
v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep
it consistent(Rodrigo)
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712005343.24571-2-jose.souza@intel.com
There is some scenarios that we are aware that sink probe can fail,
so lets add the infrastructure to let hotplug() hook to request
another probe after some time.
v2: Handle shared HPD pins (Imre)
v3: Rebased
v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep
it consistent(Rodrigo)
v5: Making the working queue used explicit through all the callers to
hotplug_work (Ville)
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712005343.24571-1-jose.souza@intel.com
