Currently, the queue mapping result is saved in a two-dimensional
array. In the hot path, to get a hctx, we need do following:
q->queue_hw_ctx[q->tag_set->map[type].mq_map[cpu]]
This isn't very efficient. We could save the queue mapping result into
ctx directly with different hctx type, like,
ctx->hctxs[type]
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a new I/O request arrives for a bfq_queue, say Q, bfq checks
whether that request is close to
(a) the head request of some other queue waiting to be served, or
(b) the last request dispatched for the in-service queue (in case Q
itself is not the in-service queue)
If a queue, say Q2, is found for which the above condition holds, then
bfq merges Q and Q2, to hopefully get a more sequential I/O in the
resulting merged queue, and thus a possibly higher throughput.
Case (b) is checked by comparing the new request for Q with the last
request dispatched, assuming that the latter necessarily belonged to the
in-service queue. Unfortunately, this assumption is no longer always
correct, since commit d0edc2473b ("block, bfq: inject other-queue I/O
into seeky idle queues on NCQ flash").
When the assumption does not hold, queues that must not be merged may be
merged, causing unexpected loss of control on per-queue service
guarantees.
This commit solves this problem by adding an extra field, which stores
the actual last request dispatched for the in-service queue, and by
using this new field to correctly check case (b).
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Writes tend to starve reads. bfq counters this problem by overcharging
writes with an inflated service w.r.t. the actual service (number of
sector written) they receive.
Yet his overcharging is useless, and actually causes unfairness in the
opposite direction, when bfq happens to be enforcing strong I/O control.
bfq does this enforcing when the scenario is asymmetric, i.e., when some
bfq_queue or group of bfq_queues is to be granted a different bandwidth
than some other bfq_queue or group of bfq_queues. So, in such a
scenario, this commit disables write overcharging.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The original commit is commit 1a1238a7dd ("cfq-iosched: improve hw_tag
detection") and has the following commit message:
If active queue hasn't enough requests and idle window opens, cfq will
not dispatch sufficient requests to hardware. In such situation, current
code will zero hw_tag. But this is because cfq doesn't dispatch enough
requests instead of hardware queue doesn't work. Don't zero hw_tag in
such case.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bfq simple heuristic from cfq for detecting whether the drive performs
command queueing: check whether the average number of in-flight requests
is above a given threshold. Unfortunately this heuristic does fail to
detect queueing (on drives with queueing) if processes doing I/O are few
and issue I/O with a low depth.
To reduce false negatives, this commit lowers the threshold.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bfq maintains an ordered list, through a red-black tree, of unique
weights of active bfq_queues. This list is used to detect whether there
are active queues with differentiated weights. The weight of a queue is
removed from the list when both the following two conditions become
true:
(1) the bfq_queue is flagged as inactive
(2) the has no in-flight request any longer;
Unfortunately, in the rare cases where condition (2) becomes true before
condition (1), the removal fails, because the function to remove the
weight of the queue (bfq_weights_tree_remove) is rightly invoked in the
path that deactivates the bfq_queue, but mistakenly invoked *before* the
function that actually performs the deactivation (bfq_deactivate_bfqq).
This commits moves the invocation of bfq_weights_tree_remove for
condition (1) to after bfq_deactivate_bfqq. As a consequence of this
move, it is necessary to add a further reference to the queue when the
weight of a queue is added, because the queue might otherwise be freed
before bfq_weights_tree_remove is invoked. This commit adds this
reference and makes all related modifications.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bfq_update_peak_rate, to check whether an I/O request rq is
sequential, only the seek distance of rq w.r.t. the last request
dispatched is controlled. This is not sufficient for non-rotational
storage, where the size of rq is at least as relevant. This commit adds
the missing control.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bfq detects the creation of multiple bfq_queues shortly after each
other, namely a burst of queue creations in the terminology used in the
code. If the burst is large, then no queue in the burst is granted
- either I/O-dispatch plugging when the queue remains temporarily idle
while in service;
- or weight raising, because it causes even longer plugging.
In fact, such a plugging tends to lower throughput, while these bursts
are typically due to applications or services that spawn multiple
processes, to reach a common goal as soon as possible. Examples are a
"git grep" or the booting of a system.
Unfortunately, disabling plugging may cause a loss of service guarantees
in asymmetric scenarios, i.e., if queue weights are differentiated or if
more than one group is active.
This commit addresses this issue by no longer disabling I/O-dispatch
plugging for queues in large bursts.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the in-service bfq_queue is sync and remains temporarily idle, then
I/O dispatching (from other queues) may be plugged. It may be dome for
two reasons: either to boost throughput, or to preserve the bandwidth
share of the in-service queue. In the first case, if the I/O of the
in-service queue, when it finally arrives, consists only of one small
I/O request, then it makes sense to plug even the I/O of the in-service
queue. In fact, serving such a small request immediately is likely to
lower throughput instead of boosting it, whereas waiting a little bit is
likely to let that request grow, thanks to request merging, and become
more profitable in terms of throughput (this is likely to happen exactly
because the I/O of the queue has been detected to boost throughput).
On the opposite end, if I/O dispatching is being plugged only to
preserve the bandwidth of the in-service queue, then it would be better
not to plug also the I/O of the in-service queue, because such a
plugging is likely to cause only loss of bandwidth for the queue.
Unfortunately, no distinction is made between the two cases, and the I/O
of the in-service queue is always plugged in case just a small I/O
request arrives. This commit draws this missing distinction and does not
perform harmful plugging.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a preparatory commit for commits that need to check only one of
the two main reasons for idling. This change should also improve the
quality of the code a little bit, by splitting a function that contains
very long, non-trivial and little related comments.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In asymmetric scenarios, i.e., when some bfq_queue or bfq_group needs to
be guaranteed a different bandwidth than other bfq_queues or bfq_groups,
these service guaranteed can be provided only by plugging I/O dispatch,
completely or partially, when the queue in service remains temporarily
empty. A case where asymmetry is particularly strong is when some active
bfq_queues belong to a higher-priority class than some other active
bfq_queues. Unfortunately, this important case is not considered at all
in the code for detecting asymmetric scenarios. This commit adds the
missing logic.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before commit 18e5a57d79 ("block, bfq: postpone rq preparation to
insert or merge"), the destination queue for a request was chosen by a
different hook than the one that then inserted the request. So, between
the execution of the two hooks, the bic of the process generating the
request could happen to be redirected to a different bfq_queue. As a
consequence, the destination bfq_queue stored in the request could be
wrong. Such an event does not need to ba handled any longer.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With some unlucky sequences of events, the function bfq_updated_next_req
updates the current budget of a bfq_queue to a lower value than the
service received by the queue using such a budget. Unfortunately, if
this happens, then the return value of the function bfq_bfqq_budget_left
becomes inconsistent. This commit solves this problem by lower-bounding
the budget computed in bfq_updated_next_req to the service currently
charged to the queue.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To boost throughput on devices with internal queueing and in scenarios
where device idling is not strictly needed, bfq immediately starts
serving a new bfq_queue if the in-service bfq_queue remains without
pending I/O, even if new I/O may arrive soon for the latter queue. Then,
if such I/O actually arrives soon, bfq preempts the new in-service
bfq_queue so as to give the previous queue a chance to go on being
served (in case the previous queue should actually be the one to be
served, according to its timestamps).
However, the in-service bfq_queue, say Q, may also be without further
budget when it remains also pending I/O. Since bfq changes budgets
dynamically to fit the needs of bfq_queues, this happens more often than
one may expect. If this happens, then there is no point in trying to go
on serving Q when new I/O arrives for it soon: Q would be expired
immediately after being selected for service. This would only cause
useless overhead. This commit avoids such a useless selection.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The speed at which a bfq_queue receives I/O is one of the parameters by
which bfq decides whether the queue is soft real-time (i.e., whether the
queue contains the I/O of a soft real-time application). In particular,
when a bfq_queue remains without outstanding I/O requests, bfq computes
the minimum time instant, named soft_rt_next_start, at which the next
request of the queue may arrive for the queue to be deemed as soft real
time.
Unfortunately this filtering may cause problems with a queue in
interactive weight raising. In fact, such a queue may be conveying the
I/O needed to load a soft real-time application. The latter will
actually exhibit a soft real-time I/O pattern after it finally starts
doing its job. But, if soft_rt_next_start is updated for an interactive
bfq_queue, and the queue has received a lot of service before remaining
with no outstanding request (likely to happen on a fast device), then
soft_rt_next_start is assigned such a high value that, for a very long
time, the queue is prevented from being possibly considered as soft real
time.
This commit removes the updating of soft_rt_next_start for bfq_queues in
interactive weight raising.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mtip32xx driver uses managed resources for DMA coherent memory
and irqs, but then always pairs them with free calls anyway, making
the resource tracking rather pointless. Given some DMA allocations
are transient anyway, the irq freeing seems to require ordering vs
other hardware access the best solution seems to be to stop using
the managed resource API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the swapped outb() parameters in the KASLR code
- Fix the PKEY handling at fork which missed to preserve the pkey
state for the child. Comes with a test case to validate that.
- Fix the entry stack handling for XEN PV to respect that XEN PV
systems enter the function already on the current thread stack and
not on the trampoline.
- Fix kexec load failure caused by using a stale value when the
kexec_buf structure is reused for subsequent allocations.
- Fix a bogus sizeof() in the memory encryption code
- Enforce PCI dependency for the Intel Low Power Subsystem
- Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
x86/entry/64/compat: Fix stack switching for XEN PV
x86/kexec: Fix a kexec_file_load() failure
x86/mm/mem_encrypt: Fix erroneous sizeof()
x86/selftests/pkeys: Fork() to check for state being preserved
x86/pkeys: Properly copy pkey state at fork()
x86/kaslr: Fix incorrect i8254 outb() parameters
x86/intel/lpss: Make PCI dependency explicit
Pull x86 timer fixes from Thomas Gleixner:
"Two commits which were missed to be sent during the merge window.
- The TSC calibration fix turns out to be more urgent as recent
Skylake-X systems seem to have massive trouble with calibration
disturbance. This should go back into stable for that reason and it
the risk of breakage is rather low.
- Drop an unused define"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hpet: Remove unused FSEC_PER_NSEC define
x86/tsc: Make calibration refinement more robust
Pull timer fix from Thomas Glexiner:
"A single regression fix to address the unintended breakage of posix
cpu timers.
This is caused by a new sanity check in the common code, which fails
for posix cpu timers under certain conditions because the posix cpu
timer code never updates the variable which is checked"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Unbreak timer rearming
Pull locking fixes from Thomas Gleixner:
"A small series of fixes which all address possible missed wakeups:
- Document and fix the wakeup ordering of wake_q
- Add the missing barrier in rcuwait_wake_up(), which was documented
in the comment but missing in the code
- Fix the possible missed wakeups in the rwsem and futex code"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Fix (possible) missed wakeup
futex: Fix (possible) missed wakeup
sched/wake_q: Fix wakeup ordering for wake_q
sched/wake_q: Document wake_q_add()
sched/wait: Fix rcuwait_wake_up() ordering
Pull irq fixes from Thomas Gleixner:
"A small set of fixes for the interrupt subsystem:
- Fix a double increment in the irq descriptor allocator which
resulted in a sanity check only being done for every second
affinity mask
- Add a missing device tree translation in the stm32-exti driver.
Without that the interrupt association is completely wrong.
- Initialize the mutex in the GIC-V3 MBI driver
- Fix the alignment for aliasing devices in the GIC-V3-ITS driver so
multi MSI allocations work correctly
- Ensure that the initial affinity of a interrupt is not empty at
startup time.
- Drop bogus include in the madera irq chip driver
- Fix KernelDoc regression"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size
genirq/irqdesc: Fix double increment in alloc_descs()
genirq: Fix the kerneldoc comment for struct irq_affinity_desc
irqchip/madera: Drop GPIO includes
irqchip/gic-v3-mbi: Fix uninitialized mbi_lock
irqchip/stm32-exti: Add domain translate function
genirq: Make sure the initial affinity is not empty
-----BEGIN PGP SIGNATURE-----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=9xzu
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190127' of git://git.kernel.dk/linux-block
Pull block revert from Jens Axboe:
"Silly error snuck into a patch from the last series, let's do a revert
to avoid a potential use-after-free"
* tag 'for-linus-20190127' of git://git.kernel.dk/linux-block:
Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"
and virtual APIC, 32-bit fixes, an important fix to restore operation on older
processors, and a bunch of hyper-v bugfixes. Several are marked stable.
There are also fixes for GCC warnings and for a GCC/objtool interaction.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcTBqRAAoJEL/70l94x66DF8wH/0LKWQd4ay54OgpfdPRcUqXa
yW10qqnO5OZfpI19UU2rfv2QXrdSOnDafgN6xiQ2Dz7m3JsZB7gBDsCCYKzeUgCz
YB0UVcX1ZS+gr3igDDHIw3lWPBUqDIzKmEJO++9nAbDi4gOmWaPQ8vWrfORWAZcl
yx2nCjeljjbO65UdRTdr3TkUNbpFlJ2NEUrzzco8OgChNB9QoxLTSJHrZxeZ7dNn
J/ZDAaBwRxXN/aKH0A3+pwUFrP5nGuronT6nGo1048WWrlQzdMp7qh8fPtTBvWJ4
uqUrrYc7jY/EhfZ4k/aAUGkAdt4IZI1KyHjhqtmB9zf+hezphUJv66QYQGVTFts=
=yUth
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Quite a few fixes for x86: nested virtualization save/restore, AMD
nested virtualization and virtual APIC, 32-bit fixes, an important fix
to restore operation on older processors, and a bunch of hyper-v
bugfixes. Several are marked stable.
There are also fixes for GCC warnings and for a GCC/objtool interaction"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Mark expected switch fall-throughs
KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
KVM: selftests: check returned evmcs version range
x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
kvm: selftests: Fix region overlap check in kvm_util
kvm: vmx: fix some -Wmissing-prototypes warnings
KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
svm: Fix AVIC incomplete IPI emulation
svm: Add warning message for AVIC IPI invalid target
KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
KVM: x86: Fix PV IPIs for 32-bit KVM host
x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
kvm: x86/vmx: Use kzalloc for cached_vmcs12
KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
KVM: x86: Fix single-step debugging
x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
* Fix support for NVDIMMs that implement the ACPI standard label
methods.
* Fix error handling for security overwrite (memory leak / userspace
hang condition), and another one-line security cleanup
-----BEGIN PGP SIGNATURE-----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=E4Rz
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix for namespace label support for non-Intel NVDIMMs that implement
the ACPI standard label method.
This has apparently never worked and could wait for v5.1. However it
has enough visibility with hardware vendors [1] and distro bug
trackers [2], and low enough risk that I decided it should go in for
-rc4. The other fixups target the new, for v5.0, nvdimm security
functionality. The larger init path fixup closes a memory leak and a
potential userspace lockup due to missed notifications.
[1] https://github.com/pmem/ndctl/issues/78
[2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785
These have all soaked in -next for a week with no reported issues.
Summary:
- Fix support for NVDIMMs that implement the ACPI standard label
methods.
- Fix error handling for security overwrite (memory leak / userspace
hang condition), and another one-line security cleanup"
* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Fix command-supported detection
acpi/nfit: Block function zero DSMs
libnvdimm/security: Require nvdimm_security_setup_events() to succeed
nfit_test: fix security state pull for nvdimm security nfit_test
Pull input fixes from Dmitry Torokhov:
"A fixup for the input_event fix for y2038 Sparc64, and couple other
minor fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: input_event - fix the CONFIG_SPARC64 mixup
Input: olpc_apsp - assign priv->dev earlier
Input: uinput - fix undefined behavior in uinput_validate_absinfo()
Input: raspberrypi-ts - fix link error
Input: xpad - add support for SteelSeries Stratus Duo
Input: input_event - provide override for sparc64
Pull networking fixes from David Miller:
1) Count ttl-dropped frames properly in mac80211, from Bob Copeland.
2) Integer overflow in ktime handling of bcm can code, from Oliver
Hartkopp.
3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon
Horman.
4) Various hash key fixes in hv_netvsc, from Haiyang Zhang.
5) Use after free in ax25, from Eric Dumazet.
6) Several fixes to the SSN support in SCTP, from Xin Long.
7) Do not process frames after a NAPI reschedule in ibmveth, from
Thomas Falcon.
8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
qed: Revert error handling changes.
cfg80211: extend range deviation for DMG
cfg80211: reg: remove warn_on for a normal case
mac80211: Add attribute aligned(2) to struct 'action'
mac80211: don't initiate TDLS connection if station is not associated to AP
nl80211: fix NLA_POLICY_NESTED() arguments
ibmveth: Do not process frames after calling napi_reschedule
net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
net: usb: asix: ax88772_bind return error when hw_reset fail
MAINTAINERS: Update cavium networking drivers
net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
net/mlx4_core: Add masking for a few queries on HCA caps
sctp: set flow sport from saddr only when it's 0
sctp: set chunk transport correctly when it's a new asoc
sctp: improve the events for sctp stream adding
sctp: improve the events for sctp stream reset
ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
ax25: fix possible use-after-free
sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
hv_netvsc: fix typos in code comments
...
We can't touch a bio after ->make_request_fn(), for all we know it could
already have been completed by the time this function returns.
This reverts commit 698cef1739.
Reported-by: syzbot+4df6ca820108fd248943@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=CCH2
-----END PGP SIGNATURE-----
Merge tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb3 fixes from Steve French:
"A set of small smb3 fixes, some fixing various crediting issues
discovered during xfstest runs, five for stable"
* tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData
smb3: add credits we receive from oplock/break PDUs
CIFS: Fix mounts if the client is low on credits
CIFS: Do not assume one credit for async responses
CIFS: Fix credit calculations in compound mid callback
CIFS: Fix credit calculation for encrypted reads with errors
CIFS: Fix credits calculations for reads with errors
CIFS: Do not reconnect TCP session in add_credits()
smb3: Cleanup license mess
CIFS: Fix possible hang during async MTU reads and writes
cifs: fix memory leak of an allocated cifs_ntsd structure
Six fixes, all of which appear to have user visible consequences. The
DMA one is a regression fix from the merge window and of the others,
four are driver specific and one specific to the target code.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXEt6GSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbxoAP0R0z0J
fdCRn9AMRbZ3xJzD+E6V2gw38Gdgm8rR5mT1gQEAv1VxZwOAb9Qxbcr+l4uybqZr
Q55H31I/IvBgNm84jH0=
=vkW7
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes, all of which appear to have user visible consequences.
The DMA one is a regression fix from the merge window and of the
others, four are driver specific and one specific to the target code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: Use explicit access size in ufshcd_dump_regs
scsi: tcmu: fix use after free
scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
scsi: communicate max segment size to the DMA mapping code
-----BEGIN PGP SIGNATURE-----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=iucY
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190125' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes for this release. This contains:
- Silence sparse rightfully complaining about non-static wbt
functions (Bart)
- Fixes for the zoned comments/ioctl documentation (Damien)
- direct-io fix that's been lingering for a while (Ernesto)
- cgroup writeback fix (Tejun)
- Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)
- Block recursion tracking fix (Ming)
- Fix debugfs command flag naming for a few flags (Jianchao)"
* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
block: Fix comment typo
uapi: fix ioctl documentation
blk-wbt: Declare local functions static
blk-mq: fix the cmd_flag_name array
nvme-multipath: drop optimization for static ANA group IDs
nvmet-rdma: fix null dereference under heavy load
nvme-rdma: rework queue maps handling
nvme-tcp: fix timeout handler
nvme-rdma: fix timeout handler
writeback: synchronize sync(2) against cgroup writeback membership switches
block: cover another queue enter recursion via BIO_QUEUE_ENTERED
direct-io: allow direct writes to empty inodes
Here are some small char and misc driver fixes to resolve some reported
issues, as well as a number of binderfs fixups that were found after
auditing the filesystem code by Al Viro. As binderfs hasn't been in a
previous release yet, it's good to get these in now before the first
users show up.
All of these have been in linux-next for a bit with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXEr/Iw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymLqACgsYcCs0r/RMqXfvMqJ7beUGq02ioAoNPD0hQh
Z76nfI+21TiuXx24JCfZ
=Fo1U
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes to resolve some
reported issues, as well as a number of binderfs fixups that were
found after auditing the filesystem code by Al Viro. As binderfs
hasn't been in a previous release yet, it's good to get these in now
before the first users show up.
All of these have been in linux-next for a bit with no reported
issues"
* tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'
binderfs: switch from d_add() to d_instantiate()
binderfs: drop lock in binderfs_binder_ctl_create
binderfs: kill_litter_super() before cleanup
binderfs: rework binderfs_binder_device_create()
binderfs: rework binderfs_fill_super()
binderfs: prevent renaming the control dentry
binderfs: remove outdated comment
binderfs: use __u32 for device numbers
binderfs: use correct include guards in header
misc: pvpanic: fix warning implicit declaration
char/mwave: fix potential Spectre v1 vulnerability
misc: ibmvsm: Fix potential NULL pointer dereference
binderfs: fix error return code in binderfs_fill_super()
mei: me: add denverton innovation engine device IDs
mei: me: mark LBG devices as having dma support
mei: dma: silent the reject message
binderfs: handle !CONFIG_IPC_NS builds
binderfs: reserve devices for initial mount
binderfs: rename header to binderfs.h
...
Here are some small staging driver fixes for 5.0-rc4.
They resolve some reported bugs and add a new device id for one driver.
Nothing major at all, but all good to have.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXEr+Xw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymMhQCgvyEifc3BlhEp6AJtznXTqgIrBXUAn363S3zJ
k0o8Rr4iONcRwyIbWMn5
=mO7R
-----END PGP SIGNATURE-----
Merge tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.0-rc4.
They resolve some reported bugs and add a new device id for one
driver. Nothing major at all, but all good to have.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ion: Support cpu access during dma_buf_detach
staging: rtl8723bs: Fix build error with Clang when inlining is disabled
staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1
staging: vchiq: Fix local event signalling
Staging: wilc1000: unlock on error in init_chip()
staging: wilc1000: fix memory leak in wilc_add_rx_gtk
staging: wilc1000: fix registration frame size
Here are a number of small tty core and serial driver fixes for 5.0-rc4
to resolve some reported issues.
Nothing major, the small serial driver fixes, a tty core fixup for a
crash that was reported, and some good vt fixes from Nicolas Pitre as he
seems to be auditing that chunk of code a lot lately.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXEr9zw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylgaQCcCpv3UHszx+ZemlyPUB3ZGEa1l48AoLd3VB46
cRO5Cf78Dr/FO73bWjLR
=zjYg
-----END PGP SIGNATURE-----
Merge tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty core and serial driver fixes for
5.0-rc4 to resolve some reported issues.
Nothing major, the small serial driver fixes, a tty core fixup for a
crash that was reported, and some good vt fixes from Nicolas Pitre as
he seems to be auditing that chunk of code a lot lately.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
tty: Handle problem if line discipline does not have receive_buf
vgacon: unconfuse vc_origin when using soft scrollback
vt: invoke notifier on screen size change
vt: always call notifier with the console lock held
vt: make vt_console_print() compatible with the unicode screen buffer
tty/n_hdlc: fix __might_sleep warning
serial: 8250: Fix serial8250 initialization crash
uart: Fix crash in uart_write and uart_put_char
Here are a number of small USB and PHY driver fixes for 5.0-rc4.
Nothing major at all, just the usual selection of USB gadget bugfixes,
some new USB serial driver ids, some SPDX fixes, and some PHY driver
fixes for reported issues.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXEr9Iw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yltXACg1ycTrlsIDEtj0fQb0KpgmovzYMEAn02nv62w
+6bHM1m+RZvKw5DnOrKb
=g6YM
-----END PGP SIGNATURE-----
Merge tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a number of small USB and PHY driver fixes for 5.0-rc4.
Nothing major at all, just the usual selection of USB gadget bugfixes,
some new USB serial driver ids, some SPDX fixes, and some PHY driver
fixes for reported issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: keyspan_usa: add proper SPDX lines for .h files
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
USB: leds: fix regression in usbport led trigger
usb: chipidea: fix static checker warning for NULL pointer
MAINTAINERS: email address update in MAINTAINERS entries
USB: usbip: delete README file
USB: serial: pl2303: add new PID to support PL2303TB
usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing
phy: ath79-usb: Fix the main reset name to match the DT binding
phy: ath79-usb: Fix the power on error path
phy: fix build breakage: add PHY_MODE_SATA
phy: ti: ensure priv is not null before dereferencing it
USB: serial: ftdi_sio: fix GPIO not working in autosuspend
usb: gadget: Potential NULL dereference on allocation error
usb: dwc3: gadget: Fix the uninitialized link_state when udc starts
usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
USB: serial: simple: add Motorola Tetra TPG2200 device id
* avoid trying to operate TDLS when not connection,
this is not valid and led to issues
* count TTL-dropped frames in mesh better
* deal with new WiGig channels in regulatory code
* remove a WARN_ON() that can trigger due to benign
races during device/driver registration
* fix nested netlink policy maxattrs (syzkaller)
* fix hwsim n_limits (syzkaller)
* propagate __aligned(2) to a surrounding struct
* return proper error in virt_wifi error path
-----BEGIN PGP SIGNATURE-----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=uCO9
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2019-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a few small fixes:
* avoid trying to operate TDLS when not connection,
this is not valid and led to issues
* count TTL-dropped frames in mesh better
* deal with new WiGig channels in regulatory code
* remove a WARN_ON() that can trigger due to benign
races during device/driver registration
* fix nested netlink policy maxattrs (syzkaller)
* fix hwsim n_limits (syzkaller)
* propagate __aligned(2) to a surrounding struct
* return proper error in virt_wifi error path
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/x86/kvm/lapic.c:1037:27: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/lapic.c:1876:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/hyperv.c:1637:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/svm.c:4396:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/mmu.c:4372:36: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/x86.c:3835:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/x86.c:7938:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/vmx/vmx.c:2015:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/vmx/vmx.c:1773:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The header search path -I. in kernel Makefiles is very suspicious;
it allows the compiler to search for headers in the top of $(srctree),
where obviously no header file exists.
The reason of having -I. here is to make the incorrectly set
TRACE_INCLUDE_PATH working.
As the comment block in include/trace/define_trace.h says,
TRACE_INCLUDE_PATH should be a relative path to the define_trace.h
Fix the TRACE_INCLUDE_PATH, and remove the iffy include paths.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check that KVM_CAP_HYPERV_ENLIGHTENED_VMCS returns correct version range.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e2e871ab2f ("x86/kvm/hyper-v: Introduce nested_get_evmcs_version()
helper") broke EVMCS enablement: to set vmcs_version we now call
nested_get_evmcs_version() but this function checks
enlightened_vmcs_enabled flag which is not yet set so we end up returning
zero.
Fix the issue by re-arranging things in nested_enable_evmcs().
Fixes: e2e871ab2f ("x86/kvm/hyper-v: Introduce nested_get_evmcs_version() helper")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
...along with the function's STACK_FRAME_NON_STANDARD tag. Moving the
asm blob results in a significantly smaller amount of code that is
marked with STACK_FRAME_NON_STANDARD, which makes it far less likely
that gcc will split the function and trigger a spurious objtool warning.
As a bonus, removing STACK_FRAME_NON_STANDARD from vmx_vcpu_run() allows
the bulk of code to be properly checked by objtool.
Because %rbp is not loaded via VMCS fields, vmx_vcpu_run() must manually
save/restore the host's RBP and load the guest's RBP prior to calling
vmx_vmenter(). Modifying %rbp triggers objtool's stack validation code,
and so vmx_vcpu_run() is tagged with STACK_FRAME_NON_STANDARD since it's
impossible to avoid modifying %rbp.
Unfortunately, vmx_vcpu_run() is also a gigantic function that gcc will
split into separate functions, e.g. so that pieces of the function can
be inlined. Splitting the function means that the compiled Elf file
will contain one or more vmx_vcpu_run.part.* functions in addition to
a vmx_vcpu_run function. Depending on where the function is split,
objtool may warn about a "call without frame pointer save/setup" in
vmx_vcpu_run.part.* since objtool's stack validation looks for exact
names when whitelisting functions tagged with STACK_FRAME_NON_STANDARD.
Up until recently, the undesirable function splitting was effectively
blocked because vmx_vcpu_run() was tagged with __noclone. At the time,
__noclone had an unintended side effect that put vmx_vcpu_run() into a
separate optimization unit, which in turn prevented gcc from inlining
the function (or any of its own function calls) and thus eliminated gcc's
motivation to split the function. Removing the __noclone attribute
allowed gcc to optimize vmx_vcpu_run(), exposing the objtool warning.
Kudos to Qian Cai for root causing that the fnsplit optimization is what
caused objtool to complain.
Fixes: 453eafbe65 ("KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines")
Tested-by: Qian Cai <cai@lca.pw>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a call to userspace_mem_region_find to conform to its spec of
taking an inclusive, inclusive range. It was previously being called
with an inclusive, exclusive range. Also remove a redundant region bounds
check in vm_userspace_mem_region_add. Region overlap checking is already
performed by the call to userspace_mem_region_find.
Tested: Compiled tools/testing/selftests/kvm with -static
Ran all resulting test binaries on an Intel Haswell test machine
All tests passed
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We get some warnings when building kernel with W=1:
arch/x86/kvm/vmx/vmx.c:426:5: warning: no previous prototype for ‘kvm_fill_hv_flush_list_func’ [-Wmissing-prototypes]
arch/x86/kvm/vmx/nested.c:58:6: warning: no previous prototype for ‘init_vmcs_shadow_fields’ [-Wmissing-prototypes]
Make them static to fix this.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being
delivered to the host (L1) when it's running nested. The problem seems to
be: svm_complete_interrupts() raises 'nmi_injected' flag but later we
decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI
injection upon entry so it got delivered to L1 instead of L2.
It seems that VMX code solves the same issue in prepare_vmcs12(), this was
introduced with code refactoring in commit 5f3d579997 ("KVM: nVMX: Rework
event injection and recovery").
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case of incomplete IPI with invalid interrupt type, the current
SVM driver does not properly emulate the IPI, and fails to boot
FreeBSD guests with multiple vcpus when enabling AVIC.
Fix this by update APIC ICR high/low registers, which also
emulate sending the IPI.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
