CHIP set bus_width according to the HW configuration, and CORE will use
it as buffer alignment.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Add two sysfs node: core_id, config_id, user can read them to fetch the
HW product information.
Also, use memset to initialize config_id, rather than quirky C syntax.
Courtesy of Nathan Chancellor <natechancellor@gmail.com>.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
[Merged Nathan's patch that uses memset to initialize config_id into
original patch as the fixes tag changed due to rebase, reworded the
commit to reference the merged patch]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Implement komeda_kms_check to add all affected_planes (even unchanged) to
drm_atomic_state. since komeda need to re-calculate the resources
assumption in every commit.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Add a new komeda_dev_func->on_off_vblank to enable/disable HW vblank event
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Pass enable/disable command to komeda and adjust komeda hardware for
enable/disable a display instance.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
These two function will be used by komeda_crtc_enable/disable to do some
prepartion works when enable/disable a crtc. like enable a crtc:
1. Adjust display operation mode.
2. Enable/prepare needed clk.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
komeda_crtc_mode_valid compares the input mode->clk with main engine clk
and AXI clk, and reject the mode if the required pixel clk can not be
satisfied by main engine clk and AXI-clk.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
A komeda flush is comprised two steps:
1. update pipeline/component state to HW.
2. call dev_func->flush to notify HW to kickoff the update.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Komeda driver treats KMS-CRTC/PLANE as user which will acquire pipeline
resources, but we still need to release the unclaimed resources.
crtc_atomic_check is the final check stage, so beside build a display data
pipeline according the crtc_state, but still needs to release/disable the
unclaimed pipeline resources.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
This function builds a display output pipeline according to crtc_state.
And this change only added single pipeline support, the dual pipeline with
slave enabled data flow support will be added in the following change.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Per komeda design KMS-plane maps to komeda layer input pipeline.
komeda_plane_atomic_check is for building a komeda layer input pipeline.
And KMS-plane is only a user of komeda resources. so there is no real HW
update for plane, but all HW update will be handled in crtc->flush.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
build_layer_data_flow builds a input pipeline according to plane_state.
and in this initial stage only added this simplest pipeline usage:
Layer -> compiz
The scaler and layer_split will be added in the future.
v2:
- Rebase.
- Introduce struct komeda_data_flow_cfg
- Add a function komeda_component_validate_private to replace the MACRO
component_validate_private
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Initialize koemda_layer, komeda_compiz, komeda_improc and
komeda_timing_ctrlr as drm private object, then track komeda private
component state by drm_atomic_state.
v2:
- Update code after Applied commit:
b962a12050 ("drm/atomic: integrate modeset lock with private objects")
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
get_state_and_set_user packed get_state and set_user into one function,
which get pipeline/component state for a specific pipeline/component, if
success set the user to it.
v2:
- Rebase.
- Applied commit:
b962a12050 ("drm/atomic: integrate modeset lock with private objects")
And delete our private modeset lock for pipeline.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
This pair of functions return the old/new private object state for the
given private_obj, or NULL if the private_obj is not part of the global
atomic state.
Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
- leases: Ensure lessees can't connect to objects outside their perview (Daniel)
- leases: Enforce that lessees hold the lease for implicitly set planes (Daniel)
- leases: A few non-functional cleanups (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Noralf Trønnes <noralf@tronnes.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlzAxJ0ACgkQlvcN/ahK
BwrfwggAheZ3GKONVBmhjkWkLNh00a0nbw0M7iFkJkvCtTEJTqUi+ZtAKhJHM/oh
LwvzalBLTVtYtsmwm9PGCRPS5gHKK2/Nv7+sWpUlieQyyaGvBIFwqx0RuH1wQKO+
+igT81sJbnIFvO4nkX4sSg3S52EFHd7CLalxA8QORhZ6QyvJ2Eay1YdeBYpR8wXc
lI4FMGei8KhckP80U8BO/NwCGYLa9y0H+fsCrSqy1b5FJ8qmvJYU7sGNoGFHS3Nq
HoWG6uaCc9jVHVElw9UD9bvE4R/TQg5g8/irBhcElCVQ0cxqGORRcSMLxGGrcrRi
1VF2W9kTF4TgCwDb5Q9pp6+RgLujkg==
=rSSS
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- fb_helper: Fix NULL deref in legacy drivers (Noralf)
- leases: Ensure lessees can't connect to objects outside their perview (Daniel)
- leases: Enforce that lessees hold the lease for implicitly set planes (Daniel)
- leases: A few non-functional cleanups (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424210604.GA32581@art_vandelay
With the previous patch drm_crtc_find will return NULL when the crtc
isn't in our lease, which will then disable the plane/connector. No
longer an issue since the lessor can't escape their lease terms
anymore, but not quite great semantics yet either.
Catch this and return -EACCES, so that at least evil test cases have a
better chance of making sure the kernel works correctly.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-8-daniel.vetter@ffwll.ch
We need this to make sure lessees can only connect their
plane/connectors to crtc objects they own. And note that this is
irrespective of whether the lessor is atomic or not, lessor cannot
prevent lessees from enabling atomic.
Cc: stable@vger.kernel.org
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-7-daniel.vetter@ffwll.ch
If userspace doesn't enable universal planes, then we automatically
add the primary and cursor planes. But for universal userspace there's
no such check (and maybe we only want to give the lessee one plane,
maybe not even the primary one), hence we need to check for the
implied plane.
v2: don't forget setcrtc ioctl.
v3: Still allow disabling of the crtc in SETCRTC.
Cc: stable@vger.kernel.org
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-6-daniel.vetter@ffwll.ch
The lessor is invariant over a lifetime of a lease, we don't have to
grab any locks for that. Speeds up the common case of not being a lease.
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-5-daniel.vetter@ffwll.ch
We kzalloc.
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-4-daniel.vetter@ffwll.ch
We disallow subleasing, so no point checking whether the master holds
all the leases - it will.
Spotted while typing exhaustive igt coverage for all these corner
cases.
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-3-daniel.vetter@ffwll.ch
Not exactly sure what's the aim here, but the canonical nil object has
id == 0, we don't use negative object ids for anything. Plus all
object_id are valided by the object_idr, there's nothing we need to do
on top of that ENOENT check a bit further down.
Spotted while typing exhaustive igt coverage for all these
corner-cases.
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-2-daniel.vetter@ffwll.ch
This code moved in here in master, so revert it the same way.
This is the same revert as 9fa246256e ("Revert "drm/i915/fbdev:
Actually configure untiled displays"") in drm-fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix the order of lane, port parameters passed to the register macro.
Note that this was already partly fixed by commit
37fc7845df ("drm/i915: Call MG_DP_MODE() macro with the right parameters order")
While at it simplify things by using the macro directly instead of an
unnecessary redirection via an array.
v2:
- Add a note the commit message about simplifying things. (José)
Fixes: 58106b7d81 ("drm/i915: Make MG PHY macros semantically consistent")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419071026.32370-1-imre.deak@intel.com
(cherry picked from commit 9c11b12184)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
- Correct the use of log macro in error case.
- Drop unnecessary messages.
- Replace DRM_ERROR/DEBUG with DRM_DEV_ERROR/DEBUG.
- Print out debug messages with correct device name in vidi and ipp drivers.
One trivial cleanup
- Just fix checkpatch error, "foo* bar" to "foo *bar" in g2d driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vX5q
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Log cleanups
- Correct the use of log macro in error case.
- Drop unnecessary messages.
- Replace DRM_ERROR/DEBUG with DRM_DEV_ERROR/DEBUG.
- Print out debug messages with correct device name in vidi and ipp drivers.
One trivial cleanup
- Just fix checkpatch error, "foo* bar" to "foo *bar" in g2d driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1556073313-9923-1-git-send-email-inki.dae@samsung.com
This removes these unless legacy is enabled.
The lock count init is unneeded anyways since it's kzalloc.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This places a bunch of the legacy members of drm_device into
only being there when legacy is enabled.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If you don't want the legacy drivers, then lets get rid of all the
legacy codepaths from the core module.
This drop the size of drm.ko for me by about 10%.
380515 7422 4192 392129 5fbc1 ../../drm-next-build/drivers/gpu/drm/drm.ko
351736 7298 4192 363226 58ada ../../drm-next-build/drivers/gpu/drm/drm.ko
v2: drop drm_lock as well, fix some DMA->DRM typos
v3: avoid ifdefs in mainline code
v4: rework ioctl defs
v4.1: fix nouveau Kconfig
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This could probably be done with Kconfig somehow, but I failed in my
first 2 minute attempt.
v2: use Kconfig better.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This moves the legacy dev reinit into the legacy misc file.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This introduces drm_legacy_misc.c as a place for some misc legacy code,
eventually I want to give the option to remove this from the build.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This makes it easier to remove legacy code later.
v2: move check into lock file as well.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This isn't used by drivers, and won't be in the future.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There was a nouveau DDX that relied on legacy context ioctls to work,
but we fixed it years ago, give distros that have a modern DDX the
option to break the uAPI and close the mess of holes that legacy
context support is.
Full context of the story:
commit 0e975980d4
Author: Peter Antoine <peter.antoine@intel.com>
Date: Tue Jun 23 08:18:49 2015 +0100
drm: Turn off Legacy Context Functions
The context functions are not used by the i915 driver and should not
be used by modeset drivers. These driver functions contain several bugs
and security holes. This change makes these functions optional can be
turned on by a setting, they are turned off by default for modeset
driver with the exception of the nouvea driver that may require them with
an old version of libdrm.
The previous attempt was
commit 7c510133d9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Aug 8 15:41:21 2013 +0200
drm: mark context support as a legacy subsystem
but this had to be reverted
commit c21eb21cb5
Author: Dave Airlie <airlied@redhat.com>
Date: Fri Sep 20 08:32:59 2013 +1000
Revert "drm: mark context support as a legacy subsystem"
v2: remove returns from void function, and formatting (Daniel Vetter)
v3:
- s/Nova/nouveau/ in the commit message, and add references to the
previous attempts
- drop the part touching the drm hw lock, that should be a separate
patch.
Signed-off-by: Peter Antoine <peter.antoine@intel.com> (v2)
Cc: Peter Antoine <peter.antoine@intel.com> (v2)
Reviewed-by: Peter Antoine <peter.antoine@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: move DRM_VM dependency into legacy config.
v3: fix missing dep (kbuild robot)
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Print out debug messages with correct device name.
As for this, this patch adds device pointer to exynos_drm_ipp structure,
and in case of exynos_drm_ipp_task structure, replace drm_device pointer
with device one. This will make each ipp driver to print out debug
messages with correct device name.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add device pointer to vidi_context and remove platform_device pointer.
It doesn't need for vidi_context to contain platform_device object.
Instead, this patch makes this driver more simply by replacing platform_device
pointer with device one.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use DRM_DEV_DEBUG* instead of DRM_DEBUG macro to print out
debug messages.
This patch just cleans up the use of debug log macro, which changes
the log macro to DRM_DEV_DEBUG*.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes unnecessary messages from fimd_clear_channels
and decon_clear_channels functions which print out just function
name.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
