Commit Graph

426478 Commits

Author SHA1 Message Date
Johan Hedberg
8b064a3ad3 Bluetooth: Clean up HCI state when doing power off
To be friendly to user space and to behave well with controllers that
lack a proper internal power off procedure we should try to clean up as
much state as possible before requesting the HCI driver to power off.

This patch updates the power off procedure that's triggered by
mgmt_set_powered to clean any scan modes, stop LE scanning and
advertising and to disconnect any open connections.

The asynchronous cleanup procedure uses the HCI request framework,
however since HCI_Disconnect is only covered until its Command Status
event we need some extra tracking/waiting of disconnections. This is
done by monitoring when hci_conn_count() indicates that there are no
more connections.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-24 11:10:36 -08:00
Johan Hedberg
7c4cfab808 Bluetooth: Don't clear HCI_ADVERTISING when powering off
Once mgmt_set_powered(off) is updated to clear the scan mode we should
not just blindly clear the HCI_ADVERTISING flag in mgmt_advertising()
but first check if there is a pending set_powered operation.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-24 11:10:36 -08:00
Johan Hedberg
ce3f24cfb2 Bluetooth: Don't clear HCI_CONNECTABLE when powering off
Once mgmt_set_powered(off) is updated to clear the scan mode we should
not just blindly clear the HCI_CONNECTABLE flag in mgmt_connectable()
but first check if there is a pending set_powered operation.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-24 11:10:36 -08:00
Johan Hedberg
bd10799933 Bluetooth: Don't clear HCI_DISCOVERABLE when powering off
Once mgmt_set_powered(off) is updated to clear the scan mode we should
not just blindly clear the HCI_DISCOVERABLE flag in mgmt_discoverable()
but first check if there is a pending set_powered operation.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-24 11:10:36 -08:00
Johan Hedberg
12d4a3b2cc Bluetooth: Move check for MGMT_CONNECTED flag into mgmt.c
Once mgmt_set_powered(off) starts doing disconnections we'll need to
care about any disconnections in mgmt.c and not just those with the
MGMT_CONNECTED flag set. Therefore, move the check into mgmt.c from
hci_event.c.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-24 11:10:36 -08:00
Johan Hedberg
778b235a3b Bluetooth: Move HCI_ADVERTISING handling into mgmt.c
We'll soon need to make decisions on toggling the HCI_ADVERTISING flag
based on pending mgmt_set_powered commands. Therefore, move the handling
from hci_event.c into mgmt.c.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-24 11:10:36 -08:00
Johan Hedberg
f4f0750500 Bluetooth: Add convenience function for getting total connection count
This patch adds a convenience function to return the number of
connections in the conn_hash list. This will be useful once we update
the power off procedure to disconnect any open connections.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-24 11:10:35 -08:00
Johan Hedberg
4518bb0fb5 Bluetooth: Fix canceling RPA expiry timer
The RPA expiry timer is only initialized inside mgmt.c when we receive
the first command from user space. This action also involves setting the
HCI_MGMT flag for the first time so that flag acts as a good indicator
of whether the delayed work variable can be touched or not. This patch
fixes hci_dev_do_close to first check the flag.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-24 11:05:26 -08:00
Johan Hedberg
c21c0ea07b Bluetooth: Enable RPA resolving if mgmt_set_privacy is called
A user space that supports the Set Privacy command is also expected to
be able to handle New IRK events. Therefore, set the HCI_RPA_RESOLVING
flag whenever the Set Privacy command is received.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-24 01:17:47 -08:00
Marcel Holtmann
473deef2c9 Bluetooth: Export current local RPA with identity information
The identity information in debugfs currently do not include the
current in use local RPA. Since the RPA is now stored in the
controller information, include it in the debugfs as well.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-24 08:50:06 +02:00
Marcel Holtmann
2b5224dca5 Bluetooth: Store current RPA and update it if needed
The RPA needs to be stored to know which is the current one. Otherwise
it is impossible to ensure that always the correct RPA can be programmed
into the controller when it is needed.

Current code checks if the address in the controller is a RPA, but that
can potentially lead to using a RPA that can not be resolved with the
IRK that has been distributed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-24 08:49:31 +02:00
Marcel Holtmann
41c90c186a Bluetooth: Use privacy mode for non-connectable advertising
When enabling non-connectable advertising, there is no need to advertise
with a public address or static address. In case LE privacy has not been
enabled a unresolvable private address will be used.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-24 08:48:02 +02:00
Marcel Holtmann
94b1fc92cd Bluetooth: Use unresolvable private address for active scanning
When running active scanning during LE discovery, do not reveal the own
identity to the peer devices. In case LE privacy has been enabled, then
a resolvable private address is used. If the LE privacy option is off,
then use an unresolvable private address.

The public address or static random address is never used in active
scanning anymore. This ensures that scan request are send using a
random address.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-24 08:45:58 +02:00
Marcel Holtmann
ac345813c4 Bluetooth: Expose current identity information in debugfs
When using LE Privacy it is useful to know the local identity address,
identity address type and identity resolving key. For debugging purposes
add these information to debugfs.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-24 08:26:02 +02:00
Johan Hedberg
7bf32048b1 Bluetooth: Remove unneeded hdev->own_addr_type
Now that the identity address type is always looked up for all
successful connections, the hdev->own_addr_type variable has become
completely unnecessary. Simply remove it.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:27 -08:00
Johan Hedberg
e26b1ffa11 Bluetooth: Fix setting correct src_type when connecting LE
This patch ensures that conn->src_type contains the same address type as
is used for initiating the connection while the connection attempt is in
progress. Once connected this value will be overwritten with the
identity address type.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:26 -08:00
Johan Hedberg
62b04cd124 Bluetooth: Add support for Set Privacy command
This patch adds support for handling the Set Privacy mgmt command,
including copying the value to hdev->irk and toggling the HCI_PRIVACY
flag.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:26 -08:00
Johan Hedberg
c982b2ea29 Bluetooth: Add debugfs entry for RPA regeneration timeout
This patch adds a rpa_timeout debugfs entry which can be used to set the
RPA regeneration timeout to something else than the default 15 minutes.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:26 -08:00
Johan Hedberg
8f71c6c315 Bluetooth: Don't write static address during power on
Since we always update the random address before enabling advertising,
scanning and initiating LE connections there is no need to write the
random address add power on.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:26 -08:00
Johan Hedberg
d948394360 Bluetooth: Use hci_update_random_address() for initiating LE scan
When we start LE scanning we need to update the local random address if
necessary. This patch updates the code to use hci_update_random_address()
for setting the own_address_type scan parameter and updating the local
random address if necessary.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:26 -08:00
Johan Hedberg
8f2a0601a5 Bluetooth: Use hci_update_random_address() for enabling advertising
When we enable advertising we need to update the local random address if
necessary. This patch takes advantage of the hci_update_random_address()
function to set the own_address_type variable and to update the local
random address if necessary.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:26 -08:00
Johan Hedberg
85030be4c5 Bluetooth: Use hci_update_random_address() when connecting LE
When we initiate LE connections we need to update the local random
address if necessary. This patch updates the LE connection creation
mechanism to use the new hci_update_random_address() function to set the
own_address_type parameter and to update the local random address if
necessary.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:26 -08:00
Johan Hedberg
ebd3a74765 Bluetooth: Add hci_update_random_address() convenience function
This patch adds a convenience function for updating the local random
address which is needed before advertising, scanning and initiating LE
connections.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:25 -08:00
Johan Hedberg
d6bfd59cae Bluetooth: Add timer for regenerating local RPA
This patch adds a timer for updating the local RPA periodically. The
default timeout is set to 15 minutes.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:25 -08:00
Johan Hedberg
b1e2b3ae97 Bluetooth: Add SMP function for generating RPAs
We need a function in smp.c to generate Resolvable Random Addresses in
order to support privacy. The local RPA will need to be generated before
advertising, scanning or connecting and regenerated at periodic
intervals. This patch adds the necessary function for RPA generation.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:25 -08:00
Johan Hedberg
82d4b35923 Bluetooth: Set the correct values for Identity Address Information
The SMP Identity Address Information PDU should contain our Identity
Address. This patch updates the code to copy the correct values from the
hci_conn object.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:25 -08:00
Johan Hedberg
7be2edbbb8 Bluetooth: Ensure hci_conn always contains the local identity address
To be consistent with the remote address info in hci_conn we want it to
also contain the local identity address information. This patch updates
the code to copy the right values in place whenever an LE connection has
been established.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-23 12:24:25 -08:00
Johan Hedberg
0f4bd942f1 Bluetooth: Add Privacy flag to mgmt supported/current settings
This patch makes sure that the Privacy flag is available in the mgmt
supported settings for all LE capable controllers and in the current
settings whenever the HCI_PRIVACY flag is set.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-22 09:59:24 -08:00
Johan Hedberg
755a900fcd Bluetooth: Add mgmt defines for privacy
This patch adds basic mgmt defines for enabling privacy. This includes a
new setting flag as well as the Set Privacy command.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-22 09:59:24 -08:00
Johan Hedberg
199a2fb14d Bluetooth: Move enable/disable_advertising higher up in mgmt.c
These functions will soon be needed by the RPA regeneration timeout so
move them higher up in mgmt.c to avoid a forward declaration.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-22 09:59:24 -08:00
Johan Hedberg
863efaf224 Bluetooth: Add initial code for distributing local IRK
This code adds a HCI_PRIVACY flag to track whether Privacy support is
enabled (meaning we have a local IRK) and makes sure the IRK is
distributed during SMP key distribution in case this flag is set.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-22 09:59:23 -08:00
Johan Hedberg
524237cb4b Bluetooth: Add helper variables to smp_distribute_keys()
This patch a couple of helper variables to the smp_distribute_keys
function in order to avoid long chains of dereferences and thereby help
readability.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-22 09:59:23 -08:00
Marcel Holtmann
1b60ef210e Bluetooth: Fix issue with missing management event opcode
The event opcode for New Identity Resolving Key event is missing from
supported event list. Just add it there.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-22 09:23:19 +02:00
Johan Hedberg
668b7b1982 Bluetooth: Fix iterating wrong list in hci_remove_irk()
We should be iterating hdev->identity_resolving_keys in the
hci_remove_irk() function instead of hdev->long_term_keys. This patch
fixes the issue.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2014-02-21 11:07:46 -03:00
Marcel Holtmann
a747439957 Bluetooth: Increase minor version of core module
With the addition of Resolvable Private Address (RPA) resolution
support for Bluetooth Low Energy connections, it makes sense to
increase the minor version of the Bluetooth core module.

The module version is not used anywhere, but it gives a nice extra
hint for debugging purposes.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-21 06:21:55 +02:00
Marcel Holtmann
3f959d46a6 Bluetooth: Provide option for changing LE advertising channel map
For testing purposes it is useful to provide an option to change the
advertising channel map. So add a debugfs option to allow this.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-21 06:20:59 +02:00
Andrzej Kaczmarek
b1765e7afe Bluetooth: Fix channel check when binding RFCOMM sock
When binding RFCOMM socket with non-zero channel we're checking if
there is already any other socket which has the same channel number
assigned and then fail. This check does not consider situation where
we have another socket connected to remote device on given channel
number in which case we still should be able to bind local socket.

This patch changes __rfcomm_get_sock_by_addr() to return only sockets
in either BT_BOUND or BT_LISTEN states, also name is updated to better
describe what this function does now.

Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-20 11:34:08 -08:00
Marcel Holtmann
7a4cd51dec Bluetooth: Track the current configured random address
For Bluetooth controllers with LE support, track the value of the
currently configured random address. It is important to know what
the current random address is to avoid unneeded attempts to set
a new address. This will become important when introducing the
LE privacy support in the future.

In addition expose the current configured random address via
debugfs for debugging purposes.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-20 08:28:04 +02:00
Marcel Holtmann
b32bba6ced Bluetooth: Replace own_address_type with force_static_address debugfs
The own_address_type debugfs option does not providing enough
flexibity for interacting with the upcoming LE privacy support.

What really is needed is an option to force using the static address
compared to the public address. The new force_static_address debugfs
option does exactly that. In addition it is also only available when
the controller does actually have a public address. For single mode
LE only controllers this option will not be available.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-20 08:19:37 +02:00
Marcel Holtmann
5192d30114 Bluetooth: Add comment explainging store hint for long term keys
The code itself is not descriptive on what store hint is used for
long term keys and why. So add some extensive comment here. Similar
to what has already been done for identity resolving key store hint.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-20 08:16:36 +02:00
Marcel Holtmann
bab6d1e594 Bluetooth: Don't send store hint for devices using identity addresses
The identity resolving keys should only be stored for devices using
resolvable random addresses. If the device is already using an
identity address, inform it about the new identity resolving key,
but tell userspace that this key is not persistent.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-20 08:12:41 +02:00
Johan Hedberg
95fbac8a8e Bluetooth: Add support for sending New IRK event
This patch adds the necessary helper function to send the New IRK mgmt
event and makes sure that the function is called at when SMP key
distribution has completed. The event is sent before the New LTK event
so user space knows which remote device to associate with the keys.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-19 08:04:24 -08:00
Johan Hedberg
35d702719d Bluetooth: Move SMP LTK notification after key distribution
This patch moves the SMP Long Term Key notification over mgmt from the
hci_add_ltk function to smp.c when both sides have completed their key
distribution. This way we are also able to update the identity address
into the mgmt_new_ltk event.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-19 08:04:24 -08:00
Johan Hedberg
23d0e128e3 Bluetooth: Track SMP keys in the SMP context
As preparation to do mgmt notification in a single place at the end of
the key distribution, store the keys that need to be notified within the
SMP context.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-19 08:04:24 -08:00
Johan Hedberg
ba74b666b5 Bluetooth: Move New LTK store hint evaluation into mgmt_new_ltk
It's simpler (one less if-statement) to just evaluate the appropriate
value for store_hint in the mgmt_new_ltk function than to pass a boolean
parameter to the function. Furthermore, this simplifies moving the mgmt
event emission out from hci_add_ltk in subsequent patches.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-19 08:04:23 -08:00
Johan Hedberg
ca9142b882 Bluetooth: Return added key when adding LTKs and IRKs
The SMP code will need to postpone the mgmt event emission for the IRK
and LTKs. To avoid extra lookups at the end of the key distribution
simply return the added value from the add_ltk and add_irk functions.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-19 08:04:23 -08:00
Johan Hedberg
0a14ab416d Bluetooth: Avoid using GFP_ATOMIC where not necessary
The various pieces of data cached in the hci_dev structure do not need
to be allocated using GFP_ATOMIC since they are never added from
interrupt context. This patch updates these allocations to use
GFP_KERNEL instead.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-19 08:04:23 -08:00
Marcel Holtmann
d66c295031 Bluetooth: Use same LE min/max connection event length during update
During LE connection establishment the value 0x0000 is used for min/max
connection event length. So use the same value when the peripheral is
requesting an update of the the connection paramters.

For some reason the value 0x0001 got used in the connection update and
0x0000 in the connection creation. Using the same value for both just
makes sense.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-19 08:53:28 +02:00
Marcel Holtmann
3698d70469 Bluetooth: Expose current list of identity resolving keys via debugfs
For debugging purposes expose the current list of identity resolving
keys via debugfs. This file is read-only and limited to root access.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-19 08:52:50 +02:00
Marcel Holtmann
edb4b46651 Bluetooth: Fix wrong identity address during connection failures
When the connection attempt fails, the address information are not
provided in the HCI_LE_Connection_Complete event. So use the original
information from the connection to reconstruct the identity address.

This is important when a connection attempt has been made using the
identity address, but the cached resolvable random address has changed
in the meantime. The failure event needs to use the identity address
and not the resolvable random address.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-19 06:09:41 +02:00