Commit Graph

145686 Commits

Author SHA1 Message Date
Marcelo Tosatti
8986ecc0ef KVM: x86: check for cr3 validity in mmu_alloc_roots
Verify the cr3 address stored in vcpu->arch.cr3 points to an existant
memslot. If not, inject a triple fault.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:55 +03:00
Marcelo Tosatti
b43b1901ad KVM: take mmu_lock when updating a deleted slot
kvm_handle_hva relies on mmu_lock protection to safely access
the memslot structures.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:54 +03:00
Marcelo Tosatti
7c8a83b75a KVM: MMU: protect kvm_mmu_change_mmu_pages with mmu_lock
kvm_handle_hva, called by MMU notifiers, manipulates mmu data only with
the protection of mmu_lock.

Update kvm_mmu_change_mmu_pages callers to take mmu_lock, thus protecting
against kvm_handle_hva.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:54 +03:00
Glauber Costa
310b5d306c KVM: Deal with interrupt shadow state for emulated instructions
We currently unblock shadow interrupt state when we skip an instruction,
but failing to do so when we actually emulate one. This blocks interrupts
in key instruction blocks, in particular sti; hlt; sequences

If the instruction emulated is an sti, we have to block shadow interrupts.
The same goes for mov ss. pop ss also needs it, but we don't currently
emulate it.

Without this patch, I cannot boot gpxe option roms at vmx machines.
This is described at https://bugzilla.redhat.com/show_bug.cgi?id=494469

Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:54 +03:00
Glauber Costa
2809f5d2c4 KVM: Replace ->drop_interrupt_shadow() by ->set_interrupt_shadow()
This patch replaces drop_interrupt_shadow with the more
general set_interrupt_shadow, that can either drop or raise
it, depending on its parameter.  It also adds ->get_interrupt_shadow()
for future use.

Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:54 +03:00
Marcelo Tosatti
547de29e5b KVM: protect assigned dev workqueue, int handler and irq acker
kvm_assigned_dev_ack_irq is vulnerable to a race condition with the
interrupt handler function. It does:

        if (dev->host_irq_disabled) {
                enable_irq(dev->host_irq);
                dev->host_irq_disabled = false;
        }

If an interrupt triggers before the host->dev_irq_disabled assignment,
it will disable the interrupt and set dev->host_irq_disabled to true.

On return to kvm_assigned_dev_ack_irq, dev->host_irq_disabled is set to
false, and the next kvm_assigned_dev_ack_irq call will fail to reenable
it.

Other than that, having the interrupt handler and work handlers run in
parallel sounds like asking for trouble (could not spot any obvious
problem, but better not have to, its fragile).

CC: sheng.yang@intel.com
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:53 +03:00
Marcelo Tosatti
32f8840064 KVM: use smp_send_reschedule in kvm_vcpu_kick
KVM uses a function call IPI to cause the exit of a guest running on a
physical cpu. For virtual interrupt notification there is no need to
wait on IPI receival, or to execute any function.

This is exactly what the reschedule IPI does, without the overhead
of function IPI. So use it instead of smp_call_function_single in
kvm_vcpu_kick.

Also change the "guest_mode" variable to a bit in vcpu->requests, and
use that to collapse multiple IPI's that would be issued between the
first one and zeroing of guest mode.

This allows kvm_vcpu_kick to called with interrupts disabled.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:53 +03:00
Avi Kivity
d149c731e4 KVM: Update cpuid 1.ecx reporting
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:53 +03:00
Avi Kivity
069ebaa464 x86: Add cpu features MOVBE and POPCNT
Add cpu feature bit support for the MOVBE and POPCNT instructions.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:52 +03:00
Avi Kivity
7faa4ee1c7 KVM: Add AMD cpuid bit: cr8_legacy, abm, misaligned sse, sse4, 3dnow prefetch
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:52 +03:00
Avi Kivity
8d753f369b KVM: Fix cpuid feature misreporting
MTRR, PAT, MCE, and MCA are all supported (to some extent) but not reported.
Vista requires these features, so if userspace relies on kernel cpuid
reporting, it loses support for Vista.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:52 +03:00
Jan Kiszka
d6a8c875f3 KVM: Drop request_nmi from stats
The stats entry request_nmi is no longer used as the related user space
interface was dropped. So clean it up.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:51 +03:00
Gleb Natapov
fe8e7f83de KVM: SVM: Don't reinject event that caused a task switch
If a task switch caused by an event remove it from the event queue.
VMX already does that.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:51 +03:00
Andre Przywara
b586eb0253 KVM: SVM: Fix cross vendor migration issue in segment segment descriptor
On AMD CPUs sometimes the DB bit in the stack segment
descriptor is left as 1, although the whole segment has
been made unusable. Clear it here to pass an Intel VMX
entry check when cross vendor migrating.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:51 +03:00
Glauber Costa
9b5843ddd2 KVM: fix apic_debug instances
Apparently nobody turned this on in a while...
setting apic_debug to something compilable, generates
some errors. This patch fixes it.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:50 +03:00
Chris Wright
efbc100c20 KVM: Trivial format fix in setup_routing_entry()
Remove extra tab.

Signed-off-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:50 +03:00
Sheng Yang
8e1c18157d KVM: VMX: Disable VMX when system shutdown
Intel TXT(Trusted Execution Technology) required VMX off for all cpu to work
when system shutdown.

CC: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:50 +03:00
Sheng Yang
522c68c441 KVM: Enable snooping control for supported hardware
Memory aliases with different memory type is a problem for guest. For the guest
without assigned device, the memory type of guest memory would always been the
same as host(WB); but for the assigned device, some part of memory may be used
as DMA and then set to uncacheable memory type(UC/WC), which would be a conflict of
host memory type then be a potential issue.

Snooping control can guarantee the cache correctness of memory go through the
DMA engine of VT-d.

[avi: fix build on ia64]

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:50 +03:00
Sheng Yang
4b12f0de33 KVM: Replace get_mt_mask_shift with get_mt_mask
Shadow_mt_mask is out of date, now it have only been used as a flag to indicate
if TDP enabled. Get rid of it and use tdp_enabled instead.

Also put memory type logical in kvm_x86_ops->get_mt_mask().

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:49 +03:00
Jan Blunck
9b62e5b10f KVM: Wake up waitqueue before calling get_cpu()
This moves the get_cpu() call down to be called after we wake up the
waiters. Therefore the waitqueue locks can safely be rt mutex.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Sven-Thorsten Dietrich <sven@thebigcorporation.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:49 +03:00
Gleb Natapov
14d0bc1f7c KVM: Get rid of get_irq() callback
It just returns pending IRQ vector from the queue for VMX/SVM.
Get IRQ directly from the queue before migration and put it back
after.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:49 +03:00
Gleb Natapov
16d7a19117 KVM: Fix userspace IRQ chip migration
Re-put pending IRQ vector into interrupt_bitmap before migration.
Otherwise it will be lost if migration happens in the wrong time.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:48 +03:00
Gleb Natapov
95ba827313 KVM: SVM: Add NMI injection support
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:48 +03:00
Gleb Natapov
c4282df98a KVM: Get rid of arch.interrupt_window_open & arch.nmi_window_open
They are recalculated before each use anyway.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:48 +03:00
Gleb Natapov
0a5fff1923 KVM: Do not report TPR write to userspace if new value bigger or equal to a previous one.
Saves many exits to userspace in a case of IRQ chip in userspace.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:47 +03:00
Gleb Natapov
615d519305 KVM: sync_lapic_to_cr8() should always sync cr8 to V_TPR
Even if IRQ chip is in userspace.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:47 +03:00
Gleb Natapov
115666dfc7 KVM: Remove kvm_push_irq()
No longer used.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:47 +03:00
Gleb Natapov
1d6ed0cb95 KVM: Remove inject_pending_vectors() callback
It is the same as inject_pending_irq() for VMX/SVM now.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:47 +03:00
Gleb Natapov
1cb948ae86 KVM: Remove exception_injected() callback.
It always return false for VMX/SVM now.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:46 +03:00
Gleb Natapov
9222be18f7 KVM: SVM: Coalesce userspace/kernel irqchip interrupt injection logic
Start to use interrupt/exception queues like VMX does.
This also fix the bug that if exit was caused by a guest
internal exception access to IDT the exception was not
reinjected.

Use EVENTINJ to inject interrupts.  Use VINT only for detecting when IRQ
windows is open again.  EVENTINJ ensures
the interrupt is injected immediately and not delayed.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:46 +03:00
Gleb Natapov
5df5664647 KVM: Use kvm_arch_interrupt_allowed() instead of checking interrupt_window_open directly
kvm_arch_interrupt_allowed() also checks IF so drop the check.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:46 +03:00
Gleb Natapov
1f21e79aac KVM: VMX: Cleanup vmx_intr_assist()
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:45 +03:00
Gleb Natapov
863e8e658e KVM: VMX: Consolidate userspace and kernel interrupt injection for VMX
Use the same callback to inject irq/nmi events no matter what irqchip is
in use. Only from VMX for now.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:45 +03:00
Gleb Natapov
8061823a25 KVM: Make kvm_cpu_(has|get)_interrupt() work for userspace irqchip too
At the vector level, kernel and userspace irqchip are fairly similar.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:45 +03:00
Jan Kiszka
3438253926 KVM: MMU: Fix auditing code
Fix build breakage of hpa lookup in audit_mappings_page. Moreover, make
this function robust against shadow_notrap_nonpresent_pte entries.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:45 +03:00
Jes Sorensen
43890ae8bc KVM: ia64: ia64 vcpu_reset() do not call kmalloc() with irqs disabled
Restore local irq enabled state before calling kvm_arch_vcpu_init(),
which calls kmalloc(GFP_KERNEL).

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:44 +03:00
Jes Sorensen
4d13c3b04f KVM: ia64: preserve int status through call to kvm_insert_vmm_mapping
Preserve interrupt status around call to kvm_insert_vmm_mappin()
in kvm_vcpu_pre_transition().

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:44 +03:00
Jes Sorensen
457459c3c7 KVM: ia64: restore irq state before calling kvm_vcpu_init
Make sure to restore the psr after calling kvm_insert_vmm_mapping()
which calls ia64_itr_entry() as it disables local interrupts and
kvm_vcpu_init() may sleep.

Avoids a warning from the lock debugging code.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:44 +03:00
Jes Sorensen
f9b647adda KVM: ia64: remove empty function vti_vcpu_load()
vti_vcpu_load() doesn't do anything, so lets get rid of it.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang<xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:44 +03:00
Xiantao Zhang
64f6afbd4c KVM: ia64: Flush all TLBs once guest's memory mapping changes.
Flush all vcpu's TLB entries once changes guest's memory mapping.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:43 +03:00
Marcelo Tosatti
59839dfff5 KVM: x86: check for cr3 validity in ioctl_set_sregs
Matt T. Yourst notes that kvm_arch_vcpu_ioctl_set_sregs lacks validity
checking for the new cr3 value:

"Userspace callers of KVM_SET_SREGS can pass a bogus value of cr3 to
the kernel. This will trigger a NULL pointer access in gfn_to_rmap()
when userspace next tries to call KVM_RUN on the affected VCPU and kvm
attempts to activate the new non-existent page table root.

This happens since kvm only validates that cr3 points to a valid guest
physical memory page when code *inside* the guest sets cr3. However, kvm
currently trusts the userspace caller (e.g. QEMU) on the host machine to
always supply a valid page table root, rather than properly validating
it along with the rest of the reloaded guest state."

http://sourceforge.net/tracker/?func=detail&atid=893831&aid=2687641&group_id=180599

Check for a valid cr3 address in kvm_arch_vcpu_ioctl_set_sregs, triple
fault in case of failure.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:43 +03:00
Jes Sorensen
c6b60c6921 KVM: ia64: Don't hold slots_lock in guest mode
Reorder locking to avoid holding the slots_lock when entering
the guest.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang<xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:43 +03:00
Avi Kivity
463656c000 KVM: Replace kvmclock open-coded get_cpu_var() with the real thing
Suggested by Ingo Molnar.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:42 +03:00
Gleb Natapov
8317c298ea KVM: SVM: Skip instruction on a task switch only when appropriate
If a task switch was initiated because off a task gate in IDT and IDT
was accessed because of an external even the instruction should not
be skipped.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:42 +03:00
Gleb Natapov
ba8afb6b0a KVM: x86 emulator: Add new mode of instruction emulation: skip
In the new mode instruction is decoded, but not executed. The EIP
is moved to point after the instruction.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:42 +03:00
Gleb Natapov
e637b8238a KVM: x86 emulator: Decode soft interrupt instructions
Do not emulate them yet.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:41 +03:00
Gleb Natapov
84ce66a686 KVM: x86 emulator: Completely decode in/out at decoding stage
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:41 +03:00
Gleb Natapov
341de7e372 KVM: x86 emulator: Add unsigned byte immediate decode
Extend "Source operand type" opcode description field to 4 bites
to accommodate new option.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:41 +03:00
Gleb Natapov
d53c4777b3 KVM: x86 emulator: Complete decoding of call near in decode stage
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:41 +03:00
Gleb Natapov
b2833e3cde KVM: x86 emulator: Complete short/near jcc decoding in decode stage
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:40 +03:00