The show_devname callback is used to print device name in
/proc/self/mounts, we need to traverse the device list consistently and
read the name that's copied to a seq buffer so we don't need further
locking.
If the first device is being deleted at the same time, the RCU will
allow us to read the device name, though it will become stale right
after the RCU protection ends. This is unavoidable and the user can
expect that the device will disappear from the filesystem's list at some
point.
The device_list_mutex was pretty heavy as it is used eg. for writing
superblock and a few other IO related contexts. This can stall any
application that reads the proc file for no reason.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Once there was a simple int force_cow that was used with the plain
barriers, and then converted to a bit, so we should use the appropriate
barrier helper.
Other variables in the complex if condition do not depend on a barrier,
so we should be fine in case the atomic barrier becomes a no-op.
Signed-off-by: David Sterba <dsterba@suse.com>
We have several reports about node pointer points to incorrect child
tree blocks, which could have even wrong owner and level but still with
valid generation and checksum.
Although btrfs check could handle it and print error message like:
leaf parent key incorrect 60670574592
Kernel doesn't have enough check on this type of corruption correctly.
At least add such check to read_tree_block() and btrfs_read_buffer(),
where we need two new parameters @level and @first_key to verify the
child tree block.
The new @level check is mandatory and all call sites are already
modified to extract expected level from its call chain.
While @first_key is optional, the following call sites are skipping such
check:
1) Root node/leaf
As ROOT_ITEM doesn't contain the first key, skip @first_key check.
2) Direct backref
Only parent bytenr and level is known and we need to resolve the key
all by ourselves, skip @first_key check.
Another note of this verification is, it needs extra info from nodeptr
or ROOT_ITEM, so it can't fit into current tree-checker framework, which
is limited to node/leaf boundary.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent tree of the test fs is like the following:
BTRFS info (device (null)): leaf 16327509003777336587 total ptrs 1 free space 3919
item 0 key (4096 168 4096) itemoff 3944 itemsize 51
extent refs 1 gen 1 flags 2
tree block key (68719476736 0 0) level 1
^^^^^^^
ref#0: tree block backref root 5
And it's using an empty tree for fs tree, so there is no way that its
level can be 1.
For REAL (created by mkfs) fs tree backref with no skinny metadata, the
result should look like:
item 3 key (30408704 EXTENT_ITEM 4096) itemoff 3845 itemsize 51
refs 1 gen 4 flags TREE_BLOCK
tree block key (256 INODE_ITEM 0) level 0
^^^^^^^
tree block backref root 5
Fix the level to 0, so it won't break later tree level checker.
Fixes: faa2dbf004 ("Btrfs: add sanity tests for new qgroup accounting code")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging an inode, at tree-log.c:copy_items(), if we call
btrfs_next_leaf() at the loop which checks for the need to log holes, we
need to make sure copy_items() returns the value 1 to its caller and
not 0 (on success). This is because the path the caller passed was
released and is now different from what is was before, and the caller
expects a return value of 0 to mean both success and that the path
has not changed, while a return value of 1 means both success and
signals the caller that it can not reuse the path, it has to perform
another tree search.
Even though this is a case that should not be triggered on normal
circumstances or very rare at least, its consequences can be very
unpredictable (especially when replaying a log tree).
Fixes: 16e7549f04 ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we have the no-holes mode enabled and fsync a file after punching a
hole in it, we can end up not logging the whole hole range in the log tree.
This happens if the file has extent items that span more than one leaf and
we punch a hole that covers a range that starts in a leaf but does not go
beyond the offset of the first extent in the next leaf.
Example:
$ mkfs.btrfs -f -O no-holes -n 65536 /dev/sdb
$ mount /dev/sdb /mnt
$ for ((i = 0; i <= 831; i++)); do
offset=$((i * 2 * 256 * 1024))
xfs_io -f -c "pwrite -S 0xab -b 256K $offset 256K" \
/mnt/foobar >/dev/null
done
$ sync
# We now have 2 leafs in our filesystem fs tree, the first leaf has an
# item corresponding the extent at file offset 216530944 and the second
# leaf has a first item corresponding to the extent at offset 217055232.
# Now we punch a hole that partially covers the range of the extent at
# offset 216530944 but does go beyond the offset 217055232.
$ xfs_io -c "fpunch $((216530944 + 128 * 1024 - 4000)) 256K" /mnt/foobar
$ xfs_io -c "fsync" /mnt/foobar
<power fail>
# mount to replay the log
$ mount /dev/sdb /mnt
# Before this patch, only the subrange [216658016, 216662016[ (length of
# 4000 bytes) was logged, leaving an incorrect file layout after log
# replay.
Fix this by checking if there is a hole between the last extent item that
we processed and the first extent item in the next leaf, and if there is
one, log an explicit hole extent item.
Fixes: 16e7549f04 ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a nice helper to do proper casting of a qgroup to a ulist aux
value. And several places that could make use of it.
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 48a89bc4f2.
The idea to commit transaction and free some space after hitting qgroup
limit is good, although the problem is it can easily cause deadlocks.
One deadlock example is caused by trying to flush data while still
holding it:
Call Trace:
__schedule+0x49d/0x10f0
schedule+0xc6/0x290
schedule_timeout+0x187/0x1c0
wait_for_completion+0x204/0x3a0
btrfs_wait_ordered_extents+0xa40/0xaf0 [btrfs]
qgroup_reserve+0x913/0xa10 [btrfs]
btrfs_qgroup_reserve_data+0x3ef/0x580 [btrfs]
btrfs_check_data_free_space+0x96/0xd0 [btrfs]
__btrfs_buffered_write+0x3ac/0xd40 [btrfs]
btrfs_file_write_iter+0x62a/0xba0 [btrfs]
__vfs_write+0x320/0x430
vfs_write+0x107/0x270
SyS_write+0xbf/0x150
do_syscall_64+0x1b0/0x3d0
entry_SYSCALL64_slow_path+0x25/0x25
Another can be caused by trying to commit one transaction while nesting
with trans handle held by ourselves:
btrfs_start_transaction()
|- btrfs_qgroup_reserve_meta_pertrans()
|- qgroup_reserve()
|- btrfs_join_transaction()
|- btrfs_commit_transaction()
The retry is causing more problems than exppected when limit is enabled.
At least a graceful EDQUOT is way better than deadlock.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now trace_qgroup_meta_reserve() will have extra type parameter.
And introduce two new trace events:
1) trace_qgroup_meta_free_all_pertrans()
For btrfs_qgroup_free_meta_all_pertrans()
2) trace_qgroup_meta_convert()
For btrfs_qgroup_convert_reserved_meta()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For quota disabled->enable case, it's possible that at reservation time
quota was not enabled so no bytes were really reserved, while at release
time, quota was enabled so we will try to release some bytes we didn't
really own.
Such situation can cause metadata reserveation underflow, for both types,
also less possible for per-trans type since quota enable will commit
transaction.
To address this, record qgroup meta reserved bytes into
root::qgroup_meta_rsv_pertrans and ::prealloc.
So at releasing time we won't free any bytes we didn't reserve.
For DATA, it's already handled by io_tree, so nothing needs to be done
there.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Quite similar for delalloc, some modification to delayed-inode and
delayed-item reservation. Also needs extra parameter for release case
to distinguish normal release and error release.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before this patch, btrfs qgroup is mixing per-transcation meta rsv with
preallocated meta rsv, making it quite easy to underflow qgroup meta
reservation.
Since we have the new qgroup meta rsv types, apply it to delalloc
reservation.
Now for delalloc, most of its reserved space will use META_PREALLOC qgroup
rsv type.
And for callers reducing outstanding extent like btrfs_finish_ordered_io(),
they will convert corresponding META_PREALLOC reservation to
META_PERTRANS.
This is mainly due to the fact that current qgroup numbers will only be
updated in btrfs_commit_transaction(), that's to say if we don't keep
such placeholder reservation, we can exceed qgroup limitation.
And for callers freeing outstanding extent in error handler, we will
just free META_PREALLOC bytes.
This behavior makes callers of btrfs_qgroup_release_meta() or
btrfs_qgroup_convert_meta() to be aware of which type they are.
So in this patch, btrfs_delalloc_release_metadata() and its callers get
an extra parameter to info qgroup to do correct meta convert/release.
The good news is, even we use the wrong type (convert or free), it won't
cause obvious bug, as prealloc type is always in good shape, and the
type only affects how per-trans meta is increased or not.
So the worst case will be at most metadata limitation can be sometimes
exceeded (no convert at all) or metadata limitation is reached too soon
(no free at all).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For meta_prealloc reservation users, after btrfs_join_transaction()
caller will modify tree so part (or even all) meta_prealloc reservation
should be converted to meta_pertrans until transaction commit time.
This patch introduces a new function,
btrfs_qgroup_convert_reserved_meta() to do this for META_PREALLOC
reservation user.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since qgroup has seperate metadata reservation types now, we can
completely get rid of the old root->qgroup_meta_rsv, which mostly acts
as current META_PERTRANS reservation type.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs uses 2 different methods to reseve metadata qgroup space.
1) Reserve at btrfs_start_transaction() time
This is quite straightforward, caller will use the trans handler
allocated to modify b-trees.
In this case, reserved metadata should be kept until qgroup numbers
are updated.
2) Reserve by using block_rsv first, and later btrfs_join_transaction()
This is more complicated, caller will reserve space using block_rsv
first, and then later call btrfs_join_transaction() to get a trans
handle.
In this case, before we modify trees, the reserved space can be
modified on demand, and after btrfs_join_transaction(), such reserved
space should also be kept until qgroup numbers are updated.
Since these two types behave differently, split the original "META"
reservation type into 2 sub-types:
META_PERTRANS:
For above case 1)
META_PREALLOC:
For reservations that happened before btrfs_join_transaction() of
case 2)
NOTE: This patch will only convert existing qgroup meta reservation
callers according to its situation, not ensuring all callers are at
correct timing.
Such fix will be added in later patches.
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ update comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
When modifying qgroup relationship, for qgroup which only owns exclusive
extents, we will go through quick update path.
In this path, we will add/subtract exclusive and reference number for
parent qgroup, since the source (child) qgroup only has exclusive
extents, destination (parent) qgroup will also own or lose those extents
exclusively.
The same should be the same for reservation, since later reservation
adding/releasing will also affect parent qgroup, without the reservation
carried from child, parent will underflow reservation or have dead
reservation which will never be freed.
However original code doesn't do the same thing for reservation.
It handles qgroup reservation quite differently:
It removes qgroup reservation, as it's allocating space from the
reserved qgroup for relationship adding.
But does nothing for qgroup reservation if we're removing a qgroup
relationship.
According to the original code, it looks just like because we're adding
qgroup->rfer, the code assumes we're writing new data, so it's follows
the normal write routine, by reducing qgroup->reserved and adding
qgroup->rfer/excl.
This old behavior is wrong, and should be fixed to follow the same
excl/rfer behavior.
Just fix it by using the correct behavior described above.
Fixes: 31193213f1 ("Btrfs: qgroup: Introduce a may_use to account space_info->bytes_may_use.")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since most callers of qgroup_reserve() are already defined by type,
converting qgroup_reserve() is quite an easy work.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce helpers to:
1) Get total reserved space
For limit calculation
2) Add/release reserved space for given type
With underflow detection and warning
3) Add/release reserved space according to child qgroup
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of single qgroup->reserved, use a new structure btrfs_qgroup_rsv
to store different types of reservation.
This patch only updates the header needed to compile.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_orphan_add() has had this case commented out since it was first
introduced in commit d68fc57b7e ("Btrfs: Metadata reservation for
orphan inodes"). Most of the orphan cleanup code has been rewritten
since then, so it's safe to say that this code isn't needed.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ switch to bool ]
Signed-off-by: David Sterba <dsterba@suse.com>
Any time the first block group of a new type is created, we add a new
kobject to sysfs to hold the attributes for that type. Kobject-internal
allocations always use GFP_KERNEL, making them prone to fs-reclaim races.
While it appears as if this can occur any time a block group is created,
the only times the first block group of a new type can be created in
memory is at mount and when we create the first new block group during
raid conversion.
This patch adds a new list to track pending kobject additions and then
handles them after we do chunk relocation. Between relocating the
target chunk (or forcing allocation of a new chunk in the case of data)
and removing the old chunk, we're in a safe place for fs-reclaim to
occur. We're holding the volume mutex, which is already held across
page faults, and the delete_unused_bgs_mutex, which will only stall
the cleaner thread.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 2be12ef79 (btrfs: Separate space_info create/update), we've
separated out the creation and updating of the space info structures.
That commit was a straightforward refactoring of the two parts of
update_space_info, but we can go a step further. Since commits
c59021f84 (Btrfs: fix OOPS of empty filesystem after balance) and
b742bb82f (Btrfs: Link block groups of different raid types), we know
that the space_info structures will be created at mount and there will
only ever be, at most, three of them.
This patch cleans out the create_space_info calls after __find_space_info
returns NULL since __find_space_info *can't* return NULL.
The initial cause for reviewing this was the kobject_add calls from
create_space_info occuring in sites where fs-reclaim wasn't allowed. Now
we are certain they occur only early in the mount process and are safe.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rebuild on missing device is as same as recover, after it's done, rbio
has data which is consistent with on-disk data, so it can be cached to
avoid further reads.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop optimal argument from the function find_live_mirror() as we can
deduce it in the function itself. Also rename optimal to
preferred_mirror.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Obtain the stripes info from the map directly and so no need
to pass it as an argument.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Added by 08e007d2e5 ("Btrfs: improve the noflush reservation") and
made redundant by 17024ad0a0 ("Btrfs: fix early ENOSPC due to
delalloc").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Added by b4570aa994 ("btrfs: fix compiling with CONFIG_BTRFS_DEBUG
enabled.") and obsoleted by 2ff7e61e0d ("btrfs: take an fs_info
directly when the root is not used otherwise").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduced by 5cdc7ad337 ("btrfs: Replace fs_info->workers with
btrfs_workqueue.") but obsoleted by 2a4581983f ("btrfs: factor
btrfs_init_workqueues() out of open_ctree()").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Added in 38c227d87c ("Btrfs: snapshot-aware defrag") but subsequently
made redundant by 0b246afa62 ("btrfs: root->fs_info cleanup, add
fs_info convenience variables").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Added in b5d67f64f9 ("Btrfs: change scrub to support big blocks") but
rendered redundant by be50a8ddaa ("Btrfs: Simplify
scrub_setup_recheck_block()'s argument").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Added as part of 86d5f99442 ("btrfs: convert prelimary reference
tracking to use rbtrees") but never used. tmp_op_key essentially
subsumed that variable.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When checking the minimal nr_devs, there is one dead and meaningless
condition:
if (ndevs < devs_increment * sub_stripes || ndevs < devs_min) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This condition is meaningless, @devs_increment has nothing to do with
@sub_stripes.
In fact, in btrfs_raid_array[], profile with sub_stripes larger than 1
(RAID10) already has the @devs_increment set to 2.
So no need to multiple it by @sub_stripes.
And above condition is also dead.
For RAID10, @devs_increment * @sub_stripes equals 4, which is also the
@devs_min of RAID10.
For other profiles, @sub_stripes is always 1, and since @ndevs is
rounded down to @devs_increment, the condition will always be true.
Remove the meaningless condition to make later reader wander less.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is the entry to the extent allocator and as such has
quite a number of parameters. Some of those have subtle effects on the
allocation algorithm. Document the parameters.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As with every function which deals with modifying the btree
btrfs_uuid_tree_rem can fail for any number of reasons (ie. EIO/ENOMEM).
Handle return error value from this function gracefully by aborting the
transaction.
Fixes: dd5f9615fc ("Btrfs: maintain subvolume items in the UUID tree")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel would like to have all stack VLA usage removed[1].
Unfortunately using an integer constant variable as the size of an
array is still considered a VLA. Instead let's use directly sizeof(var)
which removes the VLA usage. Use the occasion to remove csum_size
altogether and use sizeof() also for the size passed to memcmp
[1]: https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callbacks make use of different parameters that are passed to the
other type unnecessarily. This patch adds separate types for each and
the unused parameters will be removed.
The type extent_submit_bio_hook_t keeps all parameters and can be used
where the start/done types are not appropriate.
Signed-off-by: David Sterba <dsterba@suse.com>
