NFP is using Local Memory to model stack. LM_addr could be used as base of
a 16 32-bit word region of Local Memory. Then, if the stack offset is
beyond the current region, the local index needs to be updated. The update
needs at least three cycles to take effect, therefore the sequence normally
looks like:
local_csr_wr[ActLMAddr3, gprB_5]
nop
nop
nop
If the local index switch happens on a narrow loads, then the instruction
preparing value to zero high 32-bit of the destination register could be
counted as one cycle, the sequence then could be something like:
local_csr_wr[ActLMAddr3, gprB_5]
nop
nop
immed[gprB_5, 0]
However, we have zero extension optimization that zeroing high 32-bit could
be eliminated, therefore above IMMED insn won't be available for which case
the first sequence needs to be generated.
Fixes: 0b4de1ff19 ("nfp: bpf: eliminate zero extension code-gen")
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
get_registers() blindly copies the memory written to by the
usb_control_msg() call even if the underlying urb failed.
This could lead to junk register values being read by the driver, since
some indirect callers of get_registers() ignore the return values. One
example is:
ocp_read_dword() ignores the return value of generic_ocp_read(), which
calls get_registers().
So, emulate PCI "Master Abort" behavior by setting the buffer to all
0xFFs when usb_control_msg() fails.
This patch is copied from the r8152 driver (v2.12.0) published by
Realtek (www.realtek.com).
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch addresses a conntrack cache issue with timeout policy.
Currently, we do not check if the timeout extension is set properly in the
cached conntrack entry. Thus, after packet recirculate from conntrack
action, the timeout policy is not applied properly. This patch fixes the
aforementioned issue.
Fixes: 06bd2bdf19 ("openvswitch: Add timeout support to ct action")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using mpls over gre/gre6 setup, rt->rt_gw4 address is not set, the
same for rt->rt_gw_family. Therefore, when rt->rt_gw_family is checked
in mpls_xmit(), neigh_xmit() call is skipped. As a result, such setup
doesn't work anymore.
This issue was found with LTP mpls03 tests.
Fixes: 1550c17193 ("ipv4: Prepare rtable for IPv6 gateway")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Donald reported this sequence:
ip next add id 1 blackhole
ip next add id 2 blackhole
ip ro add 1.1.1.1/32 nhid 1
ip ro add 1.1.1.2/32 nhid 2
would cause a crash. Backtrace is:
[ 151.302790] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 151.304043] CPU: 1 PID: 277 Comm: ip Not tainted 5.3.0-rc5+ #37
[ 151.305078] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
[ 151.306526] RIP: 0010:fib_add_nexthop+0x8b/0x2aa
[ 151.307343] Code: 35 f7 81 48 8d 14 01 c7 02 f1 f1 f1 f1 c7 42 04 01 f4 f4 f4 48 89 f2 48 c1 ea 03 65 48 8b 0c 25 28 00 00 00 48 89 4d d0 31 c9 <80> 3c 02 00 74 08 48 89 f7 e8 1a e8 53 ff be 08 00 00 00 4c 89 e7
[ 151.310549] RSP: 0018:ffff888116c27340 EFLAGS: 00010246
[ 151.311469] RAX: dffffc0000000000 RBX: ffff8881154ece00 RCX: 0000000000000000
[ 151.312713] RDX: 0000000000000004 RSI: 0000000000000020 RDI: ffff888115649b40
[ 151.313968] RBP: ffff888116c273d8 R08: ffffed10221e3757 R09: ffff888110f1bab8
[ 151.315212] R10: 0000000000000001 R11: ffff888110f1bab3 R12: ffff888115649b40
[ 151.316456] R13: 0000000000000020 R14: ffff888116c273b0 R15: ffff888115649b40
[ 151.317707] FS: 00007f60b4d8d800(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
[ 151.319113] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 151.320119] CR2: 0000555671ffdc00 CR3: 00000001136ba005 CR4: 0000000000020ee0
[ 151.321367] Call Trace:
[ 151.321820] ? fib_nexthop_info+0x635/0x635
[ 151.322572] fib_dump_info+0xaa4/0xde0
[ 151.323247] ? fib_create_info+0x2431/0x2431
[ 151.324008] ? napi_alloc_frag+0x2a/0x2a
[ 151.324711] rtmsg_fib+0x2c4/0x3be
[ 151.325339] fib_table_insert+0xe2f/0xeee
...
fib_dump_info incorrectly has nhs = 0 for blackhole nexthops, so it
believes the nexthop object is a multipath group (nhs != 1) and ends
up down the nexthop_mpath_fill_node() path which is wrong for a
blackhole.
The blackhole check in nexthop_num_path is leftover from early days
of the blackhole implementation which did not initialize the device.
In the end the design was simpler (fewer special case checks) to set
the device to loopback in nh_info, so the check in nexthop_num_path
should have been removed.
Fixes: 430a049190 ("nexthop: Add support for nexthop groups")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
>From IB specific 7.6.5 SERVICE LEVEL, Service Level (SL)
is used to identify different flows within an IBA subnet.
It is carried in the local route header of the packet.
Before this commit, run "rds-info -I". The outputs are as
below:
"
RDS IB Connections:
LocalAddr RemoteAddr Tos SL LocalDev RemoteDev
192.2.95.3 192.2.95.1 2 0 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 1 0 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 0 0 fe80::21:28:1a:39 fe80::21:28:10:b9
"
After this commit, the output is as below:
"
RDS IB Connections:
LocalAddr RemoteAddr Tos SL LocalDev RemoteDev
192.2.95.3 192.2.95.1 2 2 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 1 1 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 0 0 fe80::21:28:1a:39 fe80::21:28:10:b9
"
The commit fe3475af3b ("net: rds: add per rds connection cache
statistics") adds cache_allocs in struct rds_info_rdma_connection
as below:
struct rds_info_rdma_connection {
...
__u32 rdma_mr_max;
__u32 rdma_mr_size;
__u8 tos;
__u32 cache_allocs;
};
The peer struct in rds-tools of struct rds_info_rdma_connection is as
below:
struct rds_info_rdma_connection {
...
uint32_t rdma_mr_max;
uint32_t rdma_mr_size;
uint8_t tos;
uint8_t sl;
uint32_t cache_allocs;
};
The difference between userspace and kernel is the member variable sl.
In the kernel struct, the member variable sl is missing. This will
introduce risks. So it is necessary to use this commit to avoid this risk.
Fixes: fe3475af3b ("net: rds: add per rds connection cache statistics")
CC: Joe Jin <joe.jin@oracle.com>
CC: JUNXIAO_BI <junxiao.bi@oracle.com>
Suggested-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An excerpt from netlink(7) man page,
In multipart messages (multiple nlmsghdr headers with associated payload
in one byte stream) the first and all following headers have the
NLM_F_MULTI flag set, except for the last header which has the type
NLMSG_DONE.
but, after (ee28906) there is a missing NLM_F_MULTI flag in the middle of a
FIB dump. The result is user space applications following above man page
excerpt may get confused and may stop parsing msg believing something went
wrong.
In the golang netlink lib [0] the library logic stops parsing believing the
message is not a multipart message. Found this running Cilium[1] against
net-next while adding a feature to auto-detect routes. I noticed with
multiple route tables we no longer could detect the default routes on net
tree kernels because the library logic was not returning them.
Fix this by handling the fib_dump_info_fnhe() case the same way the
fib_dump_info() handles it by passing the flags argument through the
call chain and adding a flags argument to rt_fill_info().
Tested with Cilium stack and auto-detection of routes works again. Also
annotated libs to dump netlink msgs and inspected NLM_F_MULTI and
NLMSG_DONE flags look correct after this.
Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same
as is done for fib_dump_info() so this looks correct to me.
[0] https://github.com/vishvananda/netlink/
[1] https://github.com/cilium/
Fixes: ee28906fd7 ("ipv4: Dump route exceptions if requested")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit d4c08afafa ("s390/qeth: streamline SNMP cmd code") removed
the bounds checking for req_len, under the assumption that the check in
qeth_alloc_cmd() would suffice.
But that code path isn't sufficiently robust to handle a user-provided
data_length, which could overflow (when adding the cmd header overhead)
before being checked against QETH_BUFSIZE. We end up allocating just a
tiny iob, and the subsequent copy_from_user() writes past the end of
that iob.
Special-case this path and add a coarse bounds check, to protect against
maliciuous requests. This let's the subsequent code flow do its normal
job and precise checking, without risk of overflow.
Fixes: d4c08afafa ("s390/qeth: streamline SNMP cmd code")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If protocols registered exceeded PROTO_INUSE_NR, prot will be
added to proto_list, but no available bit left for prot in
proto_inuse_idx.
Changes since v2:
* Propagate the error code properly
Signed-off-by: zhanglin <zhang.lin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl1e/VgACgkQSD+KveBX
+j6IgAgAt5c/f8Q06yrCBdUw1plX0sOXY+0TCT3iRCVQxkGsr4KSn8SmFK1Jn3PC
CU1SF0dpmKHWMxjOBI+vONSErFayNEGhHfXIaiug5b/Bcs6VEi4hSzjyj6DDJSbn
8sn/1enVR9S9ZlMprKexUu3YBb/sWXKAx9bQdZu82yfi8o/PKCr7kA3BimmFVJmH
nXoGA++c6WJUOp/4vh8FqxI8zWjvPNt8cf4qEu/gjN2y/LtAMBx9BLyY1Zd3yqWV
Pa0y741NA4LFtzWSVfJtLFS8rdVyvigbbDYrDO+yydQBO5VD/Qumu+ENnPOqWhe+
CfMP9KAP/aBGXTBS8Atj9gQVoSXYeQ==
=GQ0j
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2019-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-08-22
This series introduces some fixes to mlx5 driver.
1) Form Moshe, two fixes for firmware health reporter
2) From Eran, two ktls fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell king maintains phylink, as part of the SFP module support.
However, much of the review work is about drivers swapping from phylib
to phylink. Such changes don't make changes to the phylink core, and
so the F: rules in MAINTAINERS don't match. Add a K:, keywork rule,
which hopefully get_maintainers will match against for patches to MAC
drivers swapping to phylink.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In decode_session{4,6} there is a possibility that the skb dst dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv6
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmpv6_send
- icmpv6_route_lookup
- xfrm_decode_session_reverse
- decode_session4
- oif = skb_dst(skb)->dev->ifindex; <-- here
- decode_session6
- oif = skb_dst(skb)->dev->ifindex; <-- here
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the skb_dst(skb)->dev is actually not needed as we
called decode_session{4,6} via xfrm_decode_session_reverse(), so oif is not
used by: fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
So make a dst dev check here should be clean and safe.
v4: No changes.
v3: No changes.
v2: fix the issue in decode_session{4,6} instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Fixes: 8d79266bc4 ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In __icmp_send() there is a possibility that the rt->dst.dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv4
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmp_send
- net = dev_net(rt->dst.dev); <-- here
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the reason we need rt->dst.dev is to get the net.
So we can just try get it from skb->dev when rt->dst.dev is NULL.
v4: Julian Anastasov remind skb->dev also could be NULL. We'd better
still use dst.dev and do a check to avoid crash.
v3: No changes.
v2: fix the issue in __icmp_send() instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Fixes: c8b34e680a ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 06bd2bdf19 ("openvswitch: Add timeout support to ct action")
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2019-08-24
An update from ieee802154 for your *net* tree.
Yue Haibing fixed two bugs discovered by KASAN in the hwsim driver for
ieee802154 and Colin Ian King cleaned up a redundant variable assignment.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-08-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix verifier precision tracking with BPF-to-BPF calls, from Alexei.
2) Fix a use-after-free in prog symbol exposure, from Daniel.
3) Several s390x JIT fixes plus BE related fixes in BPF kselftests, from Ilya.
4) Fix memory leak by unpinning XDP umem pages in error path, from Ivan.
5) Fix a potential use-after-free on flow dissector detach, from Jakub.
6) Fix bpftool to close prog fd after showing metadata, from Quentin.
7) BPF kselftest config and TEST_PROGS_EXTENDED fixes, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
test_select_reuseport fails on s390 due to verifier rejecting
test_select_reuseport_kern.o with the following message:
; data_check.eth_protocol = reuse_md->eth_protocol;
18: (69) r1 = *(u16 *)(r6 +22)
invalid bpf_context access off=22 size=2
This is because on big-endian machines casts from __u32 to __u16 are
generated by referencing the respective variable as __u16 with an offset
of 2 (as opposed to 0 on little-endian machines).
The verifier already has all the infrastructure in place to allow such
accesses, it's just that they are not explicitly enabled for
eth_protocol field. Enable them for eth_protocol field by using
bpf_ctx_range instead of offsetof.
Ditto for ip_protocol, bind_inany and len, since they already allow
narrowing, and the same problem can arise when working with them.
Fixes: 2dbb9b9e6d ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
syzkaller managed to trigger the warning in bpf_jit_free() which checks via
bpf_prog_kallsyms_verify_off() for potentially unlinked JITed BPF progs
in kallsyms, and subsequently trips over GPF when walking kallsyms entries:
[...]
8021q: adding VLAN 0 to HW filter on device batadv0
8021q: adding VLAN 0 to HW filter on device batadv0
WARNING: CPU: 0 PID: 9869 at kernel/bpf/core.c:810 bpf_jit_free+0x1e8/0x2a0
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9869 Comm: kworker/0:7 Not tainted 5.0.0-rc8+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events bpf_prog_free_deferred
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x113/0x167 lib/dump_stack.c:113
panic+0x212/0x40b kernel/panic.c:214
__warn.cold.8+0x1b/0x38 kernel/panic.c:571
report_bug+0x1a4/0x200 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:178 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
RIP: 0010:bpf_jit_free+0x1e8/0x2a0
Code: 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 86 00 00 00 48 ba 00 02 00 00 00 00 ad de 0f b6 43 02 49 39 d6 0f 84 5f fe ff ff <0f> 0b e9 58 fe ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1
RSP: 0018:ffff888092f67cd8 EFLAGS: 00010202
RAX: 0000000000000007 RBX: ffffc90001947000 RCX: ffffffff816e9d88
RDX: dead000000000200 RSI: 0000000000000008 RDI: ffff88808769f7f0
RBP: ffff888092f67d00 R08: fffffbfff1394059 R09: fffffbfff1394058
R10: fffffbfff1394058 R11: ffffffff89ca02c7 R12: ffffc90001947002
R13: ffffc90001947020 R14: ffffffff881eca80 R15: ffff88808769f7e8
BUG: unable to handle kernel paging request at fffffbfff400d000
#PF error: [normal kernel read fault]
PGD 21ffee067 P4D 21ffee067 PUD 21ffed067 PMD 9f942067 PTE 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 9869 Comm: kworker/0:7 Not tainted 5.0.0-rc8+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events bpf_prog_free_deferred
RIP: 0010:bpf_get_prog_addr_region kernel/bpf/core.c:495 [inline]
RIP: 0010:bpf_tree_comp kernel/bpf/core.c:558 [inline]
RIP: 0010:__lt_find include/linux/rbtree_latch.h:115 [inline]
RIP: 0010:latch_tree_find include/linux/rbtree_latch.h:208 [inline]
RIP: 0010:bpf_prog_kallsyms_find+0x107/0x2e0 kernel/bpf/core.c:632
Code: 00 f0 ff ff 44 38 c8 7f 08 84 c0 0f 85 fa 00 00 00 41 f6 45 02 01 75 02 0f 0b 48 39 da 0f 82 92 00 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 03 0f 8e 45 01 00 00 8b 03 48 c1 e0
[...]
Upon further debugging, it turns out that whenever we trigger this
issue, the kallsyms removal in bpf_prog_ksym_node_del() was /skipped/
but yet bpf_jit_free() reported that the entry is /in use/.
Problem is that symbol exposure via bpf_prog_kallsyms_add() but also
perf_event_bpf_event() were done /after/ bpf_prog_new_fd(). Once the
fd is exposed to the public, a parallel close request came in right
before we attempted to do the bpf_prog_kallsyms_add().
Given at this time the prog reference count is one, we start to rip
everything underneath us via bpf_prog_release() -> bpf_prog_put().
The memory is eventually released via deferred free, so we're seeing
that bpf_jit_free() has a kallsym entry because we added it from
bpf_prog_load() but /after/ bpf_prog_put() from the remote CPU.
Therefore, move both notifications /before/ we install the fd. The
issue was never seen between bpf_prog_alloc_id() and bpf_prog_new_fd()
because upon bpf_prog_get_fd_by_id() we'll take another reference to
the BPF prog, so we're still holding the original reference from the
bpf_prog_load().
Fixes: 6ee52e2a3f ("perf, bpf: Introduce PERF_RECORD_BPF_EVENT")
Fixes: 74451e66d5 ("bpf: make jited programs visible in traces")
Reported-by: syzbot+bd3bba6ff3fcea7a6ec6@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Song Liu <songliubraving@fb.com>
While adding extra tests for precision tracking and extra infra
to adjust verifier heuristics the existing test
"calls: cross frame pruning - liveness propagation" started to fail.
The root cause is the same as described in verifer.c comment:
* Also if parent's curframe > frame where backtracking started,
* the verifier need to mark registers in both frames, otherwise callees
* may incorrectly prune callers. This is similar to
* commit 7640ead939 ("bpf: verifier: make sure callees don't prune with caller differences")
* For now backtracking falls back into conservative marking.
Turned out though that returning -ENOTSUPP from backtrack_insn() and
doing mark_all_scalars_precise() in the current parentage chain is not enough.
Depending on how is_state_visited() heuristic is creating parentage chain
it's possible that callee will incorrectly prune caller.
Fix the issue by setting precise=true earlier and more aggressively.
Before this fix the precision tracking _within_ functions that don't do
bpf2bpf calls would still work. Whereas now precision tracking is completely
disabled when bpf2bpf calls are present anywhere in the program.
No difference in cilium tests (they don't have bpf2bpf calls).
No difference in test_progs though some of them have bpf2bpf calls,
but precision tracking wasn't effective there.
Fixes: b5dc0163d8 ("bpf: precise scalar_value tracking")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Call to bpf_prog_put(), with help of call_rcu(), queues an RCU-callback to
free the program once a grace period has elapsed. The callback can run
together with new RCU readers that started after the last grace period.
New RCU readers can potentially see the "old" to-be-freed or already-freed
pointer to the program object before the RCU update-side NULLs it.
Reorder the operations so that the RCU update-side resets the protected
pointer before the end of the grace period after which the program will be
freed.
Fixes: d58e468b11 ("flow_dissector: implements flow dissector BPF hook")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This reverts commit f072218cca.
As reported by Aaro this patch causes network problems on
MIPS Loongson platform. Therefore revert it.
Fixes: f072218cca ("r8169: remove not needed call to dma_sync_single_for_device")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, ipv6_find_idev returns NULL when ipv6_add_dev fails,
ignoring the specific error value. This results in addrconf_add_dev
returning ENOBUFS in all cases, which is unfortunate in cases such as:
# ip link add dummyX type dummy
# ip link set dummyX mtu 1200 up
# ip addr add 2000::/64 dev dummyX
RTNETLINK answers: No buffer space available
Commit a317a2f19d ("ipv6: fail early when creating netdev named all
or default") introduced error returns in ipv6_add_dev. Before that,
that function would simply return NULL for all failures.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The request coming from Netlink should use the OEM generic handler.
The standard command handler expects payload in bytes/words/dwords
but the actual payload is stored in data if the request is coming from Netlink.
Signed-off-by: Justin Lee <justin.lee1@dell.com>
Reviewed-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Third set of fixes for 5.3, and most likely the last one. The rt2x00
regression has been reported multiple times, others are of lower
priority.
mt76
* fix hang on resume on certain machines
rt2x00
* fix AP mode regression related to encryption
iwlwifi
* avoid unnecessary error messages due to multicast frames when not
associated
* fix configuration for ax201 devices
* fix recognition of QuZ devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdXN3tAAoJEG4XJFUm622bIA0IAJp6NkccJirGLt02u3EM1d+Y
nZbdK2rV3rRLD8/XedL8Ia+0LVjrZmWPJC6DouBYXiXo1fHdphGv5ifCwUTf392l
wGEAHjqCBEHPWVOTj4Cg/XboOKuChTeR/XyBz1Vgw0PUHX1EV+93R4823tkmD8lI
2G4JaO81YfZbud9FLvd2ry3jreRoWlxk3W/GkZNegW2yVPkqCp491xGd5qmMf+ey
sVj80VegEDLpX6jqBZev9ePbwORU42dVvhp4fgaA/1GUchA5hwrBjpZmwRrgxbhA
y+NWat3s9agZ/o7mtMYN50D6h/fqoE8zVNqeH0csZEuSQzPS3k263Py+tIYEjfM=
=Z/Yo
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2019-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.3
Third set of fixes for 5.3, and most likely the last one. The rt2x00
regression has been reported multiple times, others are of lower
priority.
mt76
* fix hang on resume on certain machines
rt2x00
* fix AP mode regression related to encryption
iwlwifi
* avoid unnecessary error messages due to multicast frames when not
associated
* fix configuration for ax201 devices
* fix recognition of QuZ devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to
memory leaks. To fix this issue, introduce the label 'err4' to perform the
cleanup work before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The trap action should be copying the frame to CPU and
dropping it for forwarding, but current setting was just
copying frame to CPU.
Fixes: b596229448 ("net: mscc: ocelot: Add support for tcam")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Allan W. Nielsen <allan.nielsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dump WQE shall not include Ethernet segment. Define mlx5e_dump_wqe to be
used for "Dump WQEs" instead of sharing it with the general mlx5e_tx_wqe
layout.
Fixes: d2ead1f360 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
For TLS WQEs, metadata info did not include num_bytes. Due to this issue,
tx_tls_dump_bytes counter did not increment.
Modify tx_fill_wi() to fill num bytes. When it is called for non-traffic
WQE, zero is expected.
Fixes: d2ead1f360 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When fw fatal error occurs, poll health() first detects and reports on a
fw error. Afterwards, it detects and reports on the fw fatal error
itself.
That can cause a long delay in fw fatal error handling which waits in a
queue for the fw error handling to be finished. The fw error handle will
try asking for fw core dump command while fw in fatal state may not
respond and driver will wait for command timeout.
Changing the flow to detect and handle first fw fatal errors and only if
no fatal error detected look for a fw error to handle.
Fixes: d1bf0e2cc4 ("net/mlx5: Report devlink health on FW issues")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Crdump repeats itself every chunk of 256bytes.
That is due to bug of missing progressing offset while copying the data
from buffer to devlink_fmsg.
Fixes: 9b1f298236 ("net/mlx5: Add support for FW fatal reporter dump")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There is a copy and paste error so we have "rx" where "tx" was intended
in the priv->tx[] array.
Fixes: f5cedc84a3 ("gve: Add transmit and receive support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
it expects a unsigned int, but got a __be32
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 93a714d6b5 ("multicast: Extend ip address command to enable
multicast group join/leave on") we added a new flag IFA_F_MCAUTOJOIN
to make user able to add multicast address on ethernet interface.
This works for IPv4, but not for IPv6. See the inet6_addr_add code.
static int inet6_addr_add()
{
...
if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) {
ipv6_mc_config(net->ipv6.mc_autojoin_sk, true...)
}
ifp = ipv6_add_addr(idev, cfg, true, extack); <- always fail with maddr
if (!IS_ERR(ifp)) {
...
} else if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) {
ipv6_mc_config(net->ipv6.mc_autojoin_sk, false...)
}
}
But in ipv6_add_addr() it will check the address type and reject multicast
address directly. So this feature is never worked for IPv6.
We should not remove the multicast address check totally in ipv6_add_addr(),
but could accept multicast address only when IFA_F_MCAUTOJOIN flag supplied.
v2: update commit description
Fixes: 93a714d6b5 ("multicast: Extend ip address command to enable multicast group join/leave on")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SF2 binding does not specify that the CPU port should have
properties mandatory for successfully instantiating a PHYLINK object. As
such, there will be missing properties (including fixed-link) and when
attempting to validate and later configure link modes, we will have an
incorrect set of parameters (interface, speed, duplex).
Simply prevent the CPU port from being configured through PHYLINK since
bcm_sf2_imp_setup() takes care of that already.
Fixes: 0e27921816 ("net: dsa: Use PHYLINK for the CPU/DSA ports")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In certain cases when the probe function fails the error path calls
cpsw_remove_dt() before calling platform_set_drvdata(). This is an
issue as cpsw_remove_dt() uses platform_get_drvdata() to retrieve the
cpsw_common data and leds to a NULL pointer exception. This patches
fixes it by calling platform_set_drvdata() earlier in the probe.
Fixes: 83a8471ba2 ("net: ethernet: ti: cpsw: refactor probe to group common hw initialization")
Reported-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- fix uninit-value in batadv_netlink_get_ifindex(), by Eric Dumazet
-----BEGIN PGP SIGNATURE-----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=9t+O
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20190821' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- fix uninit-value in batadv_netlink_get_ifindex(), by Eric Dumazet
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace 'decided' with 'decide' so that comment would be
/* To decide when the network namespace should be freed. */
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* extended key ID key installation
* regulatory processing
* possible memory leak in an error path
-----BEGIN PGP SIGNATURE-----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=t8Z8
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2019-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just three fixes:
* extended key ID key installation
* regulatory processing
* possible memory leak in an error path
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When ./test_xdp_vlan_mode_generic.sh runs it complains that it can't
find file test_xdp_vlan.sh.
# selftests: bpf: test_xdp_vlan_mode_generic.sh
# ./test_xdp_vlan_mode_generic.sh: line 9: ./test_xdp_vlan.sh: No such
file or directory
Rework so that test_xdp_vlan.sh gets installed, added to the variable
TEST_PROGS_EXTENDED.
Fixes: d35661fcf9 ("selftests/bpf: add wrapper scripts for test_xdp_vlan.sh")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Jesper Dangaard Brouer <jbrouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When running test_kmod.sh the following shows up
# sysctl cannot stat /proc/sys/net/core/bpf_jit_enable No such file or directory
cannot: stat_/proc/sys/net/core/bpf_jit_enable #
# sysctl cannot stat /proc/sys/net/core/bpf_jit_harden No such file or directory
cannot: stat_/proc/sys/net/core/bpf_jit_harden #
Rework to enable CONFIG_BPF_JIT to solve "No such file or directory"
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
test_btf_dump fails when run with O=, because it needs to access source
files and assumes they live in ./progs/, which is not the case in this
scenario.
Fix by instructing kselftest to copy btf_dump_test_case_*.c files to the
test directory. Since kselftest does not preserve directory structure,
adjust the test to look in ./progs/ and then in ./.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
test_cgroup_storage fails on s390 with an assertion failure: packets are
dropped when they shouldn't. The problem is that BPF_DW packet count is
accessed as BPF_W with an offset of 0, which is not correct on
big-endian machines.
Since the point of this test is not to verify narrow loads/stores,
simply use BPF_DW when working with packet counts.
Fixes: 68cfa3ac6b ("selftests/bpf: add a cgroup storage test")
Fixes: 919646d2a3 ("selftests/bpf: extend the storage test to test per-cpu cgroup storage")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This reverts commit 96cce12ff6 ("cfg80211: fix processing world
regdomain when non modular").
Re-triggering a reg_process_hint with the last request on all events,
can make the regulatory domain fail in case of multiple WiFi modules. On
slower boards (espacially with mdev), enumeration of the WiFi modules
can end up in an intersected regulatory domain, and user cannot set it
with 'iw reg set' anymore.
This is happening, because:
- 1st module enumerates, queues up a regulatory request
- request gets processed by __reg_process_hint_driver():
- checks if previous was set by CORE -> yes
- checks if regulator domain changed -> yes, from '00' to e.g. 'US'
-> sends request to the 'crda'
- 2nd module enumerates, queues up a regulator request (which triggers
the reg_todo() work)
- reg_todo() -> reg_process_pending_hints() sees, that the last request
is not processed yet, so it tries to process it again.
__reg_process_hint driver() will run again, and:
- checks if the last request's initiator was the core -> no, it was
the driver (1st WiFi module)
- checks, if the previous initiator was the driver -> yes
- checks if the regulator domain changed -> yes, it was '00' (set by
core, and crda call did not return yet), and should be changed to 'US'
------> __reg_process_hint_driver calls an intersect
Besides, the reg_process_hint call with the last request is meaningless
since the crda call has a timeout work. If that timeout expires, the
first module's request will lost.
Cc: stable@vger.kernel.org
Fixes: 96cce12ff6 ("cfg80211: fix processing world regdomain when non modular")
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix two shortcomings in the Extended Key ID API:
1) Allow the userspace to install pairwise keys using keyid 1 without
NL80211_KEY_NO_TX set. This allows the userspace to install and
activate pairwise keys with keyid 1 in the same way as for keyid 0,
simplifying the API usage for e.g. FILS and FT key installs.
2) IEEE 802.11 - 2016 restricts Extended Key ID usage to CCMP/GCMP
ciphers in IEEE 802.11 - 2016 "9.4.2.25.4 RSN capabilities".
Enforce that when installing a key.
Cc: stable@vger.kernel.org # 5.2
Fixes: 6cdd3979a2 ("nl80211/cfg80211: Extended Key ID support")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20190805123400.51567-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
in ip_mc_inc_group, memory allocation flag, not mcast mode, is expected
by __ip_mc_inc_group
similar issue in __ip_mc_join_group, both mcase mode and gfp_t are needed
here, so use ____ip_mc_inc_group(...)
Fixes: 9fb20801da ("net: Fix ip_mc_{dec,inc}_group allocation context")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NCSI spec indicates that if the data does not end on a 32 bit
boundary, one to three padding bytes equal to 0x00 shall be present to
align the checksum field to a 32-bit boundary.
Signed-off-by: Terry S. Duncan <terry.s.duncan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we are only explicitly setting SOCK_NOSPACE on a write timeout
for non-blocking sockets. Epoll() edge-trigger mode relies on SOCK_NOSPACE
being set when -EAGAIN is returned to ensure that EPOLLOUT is raised.
Expand the setting of SOCK_NOSPACE to non-blocking sockets as well that can
use SO_SNDTIMEO to adjust their write timeout. This mirrors the behavior
that Eric Dumazet introduced for tcp sockets.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix mem leak caused by missed unpin routine for umem pages.
Fixes: 8aef7340ae ("xsk: introduce xdp_umem_page")
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
