This is what NVIDIA do on these chipsets, let's hope it works around
the reported MSI failures for us on NV86.
v2: updated to include G92, as per information provided by NVIDIA.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
v2. updated to cover GF104, as per information provided by NVIDIA.
Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is safe because ptherm hasn't been configured yet and will be a
little further down the initialization path. Ptherm should be safe
regarding to runtime reconfiguration.
v2:
- do not limit this patch to nv84-a3 and make it nv84+
v3:
- move the ack to fini()
- disable IRQs on fini()
- silently ignore un-requested IRQs
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NV31 has different config bits than NV40+ do. Also fix the DMA_IMAGE
VRAM-only setting to check the right bits.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes nv31+ able to actually perform the nv_call, since previously
the inst was not available.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since nv40 only covers pre-nv44 now, it can use the nv31-provided
functions.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The nv31/nv40 impls are actually fairly nv44-specific, since they assume
the presence of the instance register/context switching. Create a copy
before nv31/nv40 get fixed.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NV1A is numerically higher than NV17 but generationally lower. Use the
new card type to help disambiguate.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NV11/17/1F/18 come after NV10/15/16/1A. In order to facilitate using
numerical comparisons, split up the two sets into different card types.
This change should be a no-op except that the relevant cards will see
NV11 printed instead of NV10 for the family.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This code was originally moved to using nv_mask by d31e078d84. This
should not have any actual effect since the mask isn't applied to the
value.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This fixes a reported locking inversion when interacting with the DRM
core's vblank routines.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is a necessary step towards being able to work with the insane locking
requirements of the DRM core's vblank routines, and a nice cleanup as a
side-effect.
This is similar in spirit to the interfaces that Peter Hurley arrived at
with his nouveau_event rcu conversion series.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Most nouveau event handlers have storage in 'static' containers
(structures with lifetimes nearly equivalent to the drm_device),
but are dangerously reused via nouveau_event_get/_put. For
example, if nouveau_event_get is called more than once for a
given handler, the event handler list will be corrupted.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The index_nr field is constant for the lifetime of the event, so
serialized access is unnecessary.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Provide private field for event handlers exclusive use.
Convert nouveau_fence_wait_uevent() and
nouveau_fence_wait_uevent_handler(); drop struct nouveau_fence_uevent.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The test here should be ">= ARRAY_SIZE()" instead of "> ARRAY_SIZE()".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
self-assignment of a variable doesn't make a lot of sense.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- A couple of fixes that never made it into fixes-3.12
- Make NO_EVICT bo's available for shrinkers when on delayed-delete list
- Allow retrying page-faults that need to wait for GPU.
* 'ttm-next-3.13' of git://people.freedesktop.org/~thomash/linux:
drm/ttm: Fix memory type compatibility check
drm/ttm: Fix ttm_bo_move_memcpy
drm/ttm: Handle in-memory region copies
drm/ttm: Make NO_EVICT bos available to shrinkers pending destruction
drm/ttm: Allow vm fault retries
Pull request for vmwgfx. Currently just the DMA address stuff.
* 'vmwgfx-next-3.13' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Use the linux DMA api to get valid device addresses of pages
drm/ttm: Enable the dma page pool also for intel IOMMUs
Also check the busy placements before deciding to move a buffer object.
Failing to do this may result in a completely unneccessary move within a
single memory type.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
All error paths will want to keep the mm node, so handle this at the
function exit. This fixes an ioremap failure error path.
Also add some comments to make the function a bit easier to understand.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Fix the case where the ttm pointer may be NULL causing
a NULL pointer dereference.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellström <thellstrom@vmware.com>
Cc: stable@vger.kernel.org
NO_EVICT bos that are not idle when all references are dropped are put on
the delayed destroy list. However, since they are not on LRU lists, they
are not available to shrinkers at that point, and buffers on the delayed
destroy list are not checked very often for idle.
So when these buffers are put on the delayed destroy list, clear the
NO_EVICT flag and put them on the right LRU list. This way they are
immediately available for eviction or shrinkers and will not cause false
OOMS.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Make use of the FAULT_FLAG_ALLOW_RETRY flag to allow dropping the
mmap_sem while waiting for bo idle.
FAULT_FLAG_ALLOW_RETRY appears to be primarily designed for disk waits
but should work just as fine for GPU waits..
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
The code handles three different cases:
1) physical page addresses. The ttm page array is used.
2) DMA subsystem addresses. A scatter-gather list is used.
3) Coherent pages. The ttm dma pool is used, together with the dma_ttm
array os dma_addr_t
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Used by the vmwgfx driver
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
So GNOME userspace has an issue with when it rescans for modes on hotplug
events, if the monitor has no EDID it assumes that nothing has changed on
EDID as with real hw we'd never have new modes without a new EDID, and they
kind off rely on the behaviour now, however with virtual GPUs we would
like to rescan the modes and get a new preferred mode on hotplug events
to handle dynamic guest resizing (where you resize the host window and the
guest resizes with it).
This is a simple property we can make userspace watch for to trigger new
behaviour based on it, and can be used to replaced EDID hacks in virtual
drivers.
Acked-by: Marc-André Lureau <marcandre.lureau@gmail.com> (on irc)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of freeing minors in drm_dev_unregister(), we only unplug them and
delay the free to drm_dev_free(). Note that if drm_dev_register() has
never been called, minors are NULL and this has no effect.
This change is needed to allow early device unregistration. If we want to
call drm_dev_unregister() on live devices, we need to guarantee that
minors are still valid (but unplugged). This way, any open file can still
access file_priv->minor->dev to get the DRM device. However, the minor is
unplugged so no new users can occur.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Don't delay minor removal to drm_put_minor(). Otherwise, user-space can
still open the minor and cause the kernel to oops. Instead, remove the
minor during unplug so any new open() will fail to access this minor.
Note that open() and drm_unplug_minor() are both protected by the global
DRM mutex so we're fine.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
