[ Upstream commit 27ac5aada024e0821c86540ad18f37edadd77d5e ]
The refcount of the "hl_fpriv" structure is not used for the control
device, and thus hl_hpriv_put() is not called when releasing this
device.
This results with no call to put_pid(), so add it explicitly in
hl_device_release_ctrl().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dc4a6d79168e7e426e8ddf8e7219c9ffd13b2b1 ]
When device is removed, we need to make sure the F/W won't send us
any more events because during the remove process we disable the
interrupts.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8abaf379bfe19600f96ae79a6759eb37039ae05 ]
Need to take the lower 32 bits of the driver's 64-bit idle mask and put
it in the legacy 32-bit variable that the userspace reads to know the
idle mask.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9354f1b421f76f8368be13954f87d07bcbd6fffe ]
Driver does not zero some pci counters packets before sending
to FW. This causes an out of sync PI/CI between driver and FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b000700d6db50c933ce8b661154e26cf4ad06dba ]
When kzalloc() fails, we should execute hl_mmu_fini()
to release the MMU module. It's the same when
hl_ctx_init() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcaebc7354188b0d708c79df4390fbabd4d9799d ]
We need to make sure our device is idle when rebooting a virtual
machine. This is done in the driver level.
The firmware will later handle FLR but we want to be extra safe and
stop the devices until the FLR is handled.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 377182a3cc5ae6cc17fb04d06864c975f9f71c18 ]
When the firmware security is enabled, the pcie_aux_dbi_reg_addr
register in the PCI controller is blocked. Therefore, ignore
the result of writing to this register and assume it worked. Also
remove the prints on errors in the internal ELBI write function.
If the security is enabled, the firmware is responsible for setting
this register correctly so we won't have any problem.
If the security is disabled, the write will work (unless something
is totally broken at the PCI level and then the whole sequence
will fail).
In addition, remove a write to register pcie_aux_dbi_reg_addr+4,
which was never actually needed.
Moreover, PCIE_DBI registers are blocked to access from host when
firmware security is enabled. Use a different register to flush the
writes.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Driver never puts its device and control_device objects, hence
a memory leak is introduced every driver removal.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If huge range is not valid, driver uses the host range also for
huge page allocations, but driver never frees its allocation.
This introduces a memory leak every time a user closes its context.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
All throughout the driver, normal kernel pointers are
stored as 'u64' struct members, which is kind of silly
and requires casting through a uintptr_t to void* every
time they are used.
There is one line that missed the intermediate uintptr_t
case, which leads to a compiler warning:
drivers/misc/habanalabs/common/command_buffer.c: In function 'hl_cb_mmap':
drivers/misc/habanalabs/common/command_buffer.c:512:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
512 | rc = hdev->asic_funcs->cb_mmap(hdev, vma, (void *) cb->kernel_address,
Rather than adding one more cast, just fix the type and
remove all the other casts.
Fixes: 0db575350c ("habanalabs: make use of dma_mmap_coherent")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The device should be idle after a context is closed. If not, print a
notice.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
During debugging of error we sometimes need to know whether the error
happened when a user context was open. Add debug prints when opening and
closing user contexts.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Some engines use resources that belong to the kernel context (e.g. MMU
mappings). In case the halt-engines doesn't work properly due to H/W
restriction, we need to make sure the kernel context lives on until after
the hw_fini. The hw_fini resets the ASIC after that no engine is alive and
we can safely close the kernel context.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We don't try to allocate huge pages here so remove the huge word.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Future F/W versions will have enhanced security measures and the driver
won't be able to do certain configurations that it always did and those
configurations will be done by the firmware.
We use the firmware's preboot version to determine whether security
measures are enabled or not. Because we need this very early in our code,
the read of the preboot version is moved to the earliest possible place,
right after the device's PCI initialization.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There are cases in which the device should access the host memory of a
CB through the device MMU, and thus this memory should be mapped.
The patch adds a flag to the CB IOCTL, in which a user can ask the
driver to perform the mapping when creating a CB.
The mapping is allowed only if a dedicated VA range was allocated for
the specific ASIC.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Future changes require using a context while handling a command buffer,
and thus need to save the context in the command buffer object.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The user sometimes wants to check if a CS has completed to clean resources.
In that case, the user doesn't want to sleep but just to check if the CS
has finished and continue with his code.
Add a new definition to the API of the wait on CS. The new definition says
that if the timeout is 0, the driver won't sleep at all but return
immediately after checking if the CS has finished.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This commit modify the existing debugfs code to support future devices that
have a 6 HOPs MMU implementation instead of 5 HOPs implementation.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This commit adds the number of HOPs supported by the device to the
device MMU properties.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
As preparation to MMU v2, rework MMU to be device oriented
instantiated according to the device in hand.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In the future we will have MMU v2 code, so we need to prepare the
driver for it. The first step is to rename the current MMU file to
mmu_v1.c.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Change the acquiring of a device virtual address for mapping by using the
smallest possible alignment, rather than the biggest, depending on the
page size used by the user for allocating the memory. This will lower the
virtual space memory consumption.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There were a couple of comments where the name ArmCP was still used. Rename
it to CPU-CP.
In addition, rename ArmCP or ARM in log messages to "device CPU".
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There is a case where the user reaches the maximum number of CS in-flight.
In that case, the driver rejects the new CS of the user with EAGAIN. Count
that event so the user can query the driver later to see if it happened.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add dma_mmap_coherent() for goya and gaudi to match their use of
dma_alloc_coherent(), see the Link tag for why.
Link: https://lore.kernel.org/lkml/20200609091727.GA23814@lst.de/
Cc: Christoph Hellwig <hch@lst.de>
Cc: Zhang Li <li.zhang@bitmain.com>
Cc: Ding Z Nan <oshack@hotmail.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The driver use vm_pgoff to hold the CB idr handle. Before we actually call
the mapping function, we need to clear the handle so there won't be any
garbage left in vm_pgoff.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Arrange the hl_mmap code to be more structured and expandable for the
future. Add better defines that describe our usage of the vm_pgoff.
Note that I shamelessly took the code and defines from the amdkfd driver
(my previous driver).
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
ArmCP mandates that the device CPU is always an ARM processor, which might
be wrong in the future.
Most of this change is an internal renaming of variables, functions and
defines but there are two entries in sysfs which have armcp in their
names. Add identical cpucp entries but don't remove yet the armcp entries.
Those will be deprecated next year. Add the documentation about it in sysfs
documentation.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add driver implementation for reading the total energy consumption
from the device ARM FW.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Include linux/bitfield.h only in habanalabs.h, instead of in each and
every file that needs it, as habanalabs.h is already included by all.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
change busy engines bitmask to 64 bits in order to represent
more engines, needed for future ASIC support.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Use the standard FIELD_PREP() macro instead of << operator to perform
bitmask operations. This ensures type check safety and eliminate compiler
warnings.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
If both parts of if-else are goto statements, we can remove the else and
put the else goto statement after the if statement.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
%u is used for unsigned so we need to cast the int variable to u32 to avoid
compiler warning.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Although the possible values for CB's ID are only 32 bits, there are a few
places in the code where this field is shifted and passed into a function
which expects 64 bits.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
driver will now get notified upon any PCI error occurred and
will respond according to the severity of the error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Although the driver defines the first user-available sync manager object
and monitor in habanalabs.h, we would like to also expose this information
via the INFO IOCTL so the runtime can get this information dynamically.
This is because in future ASICs we won't need to define it statically.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Update firmware header with new API for getting pcie info
such as tx/rx throughput and replay counter.
These counters are needed by customers for monitor and maintenance
of multiple devices.
Add new opcodes to the INFO ioctl to retrieve these counters.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
habanalabs driver uses dma-fence mechanism for synchronization.
dma-fence mechanism was designed solely for GPUs, hence we purpose
a simpler mechanism based on completions to replace current
dma-fence objects.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Future ASIC names are longer than 15 chars so increase the variable length
to 32 chars.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
This commit fixes a potential debugfs issue that may occur when
reading the clock gating mask into the user buffer since the
user buffer size was not taken into consideration.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
During inbound iATU configuration we can get errors while
configuring PCI registers, there is a certain scenario in which these
errors are not reflected and driver is loaded with wrong configuration.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
vmalloc can return different return code than NULL and a valid
pointer. We must validate it in order to dereference a non valid
pointer.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We must validate FW size in order not to corrupt memory in case
a malicious FW file will be present in system.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The null check on a failed workqueue create is currently null checking
hdev->cq_wq rather than the pointer hdev->cq_wq[i] and so the test
will never be true on a failed workqueue create. Fix this by checking
hdev->cq_wq[i].
Addresses-Coverity: ("Dereference before null check")
Fixes: 5574cb2194 ("habanalabs: Assign each CQ with its own work queue")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In Gaudi, the default max power setting is different between PCI and PMC
cards. Therefore, the driver need to set the default after knowing what is
the card type.
The current code has a bug where it limits the maximum power of the PMC
card to 200W after a reset occurs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Allocation size can go up to 64bit but truncated to 32bit,
we should make sure it is not truncated and validate no address
overflow.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
User input must be validated before using it to
access internal structures.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
