Commit Graph

322493 Commits

Author SHA1 Message Date
Scott Wood
8043e494da powerpc/epapr: export epapr_hypercall_start
This fixes breakage introduced by the following commit:

  commit 6d2d82627f4f1e96a33664ace494fa363e0495cb
  Author: Liu Yu-B13201 <Yu.Liu@freescale.com>
  Date:   Tue Jul 3 05:48:56 2012 +0000

    PPC: Don't use hardcoded opcode for ePAPR hcall invocation

when a driver that uses ePAPR hypercalls is built as a module.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:40 +02:00
Paul Mackerras
1340f3e887 KVM: PPC: Quieten message about allocating linear regions
This is printed once for every RMA or HPT region that get
preallocated.  If one preallocates hundreds of such regions
(in order to run hundreds of KVM guests), that gets rather
painful, so make it a bit quieter.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:40 +02:00
Alexander Graf
2bb890f5ee KVM: PPC: E500: Fix clear_tlb_refs
Our mapping code assumes that TLB0 entries are always mapped. However, after
calling clear_tlb_refs() this is no longer the case.

Map them dynamically if we find an entry unmapped in TLB0.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:40 +02:00
Alexander Graf
cf1c5ca473 KVM: PPC: BookE: Expose remote TLB flushes in debugfs
We're already counting remote TLB flushes in a variable, but don't export
it to user space yet. Do so, so we know what's going on.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:39 +02:00
Alexander Graf
f4800b1f4d KVM: PPC: Expose SYNC cap based on mmu notifiers
Semantically, the "SYNC" cap means that we have mmu notifiers available.
Express this in our #ifdef'ery around the feature, so that we can be sure
we don't miss out on ppc targets when they get their implementation.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:39 +02:00
Alexander Graf
97c9505984 KVM: PPC: PR: Use generic tracepoint for guest exit
We want to have tracing information on guest exits for booke as well
as book3s. Since most information is identical, use a common trace point.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:39 +02:00
Liu Yu-B13201
8e525d59d0 PPC: Don't use hardcoded opcode for ePAPR hcall invocation
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:38 +02:00
Scott Wood
305bcf2612 powerpc/fsl-soc: use CONFIG_EPAPR_PARAVIRT for hcalls
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:38 +02:00
Stuart Yoder
4065639724 PPC: select EPAPR_PARAVIRT for all users of epapr hcalls
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:37 +02:00
Liu Yu-B13201
2f979de8a7 KVM: PPC: ev_idle hcall support for e500 guests
Signed-off-by: Liu Yu <yu.liu@freescale.com>
[varun: 64-bit changes]
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:37 +02:00
Liu Yu-B13201
9202e07636 KVM: PPC: Add support for ePAPR idle hcall in host kernel
And add a new flag definition in kvm_ppc_pvinfo to indicate
whether the host supports the EV_IDLE hcall.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
[stuart.yoder@freescale.com: cleanup,fixes for conditions allowing idle]
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
[agraf: fix typo]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:37 +02:00
Stuart Yoder
784bafac79 KVM: PPC: add pvinfo for hcall opcodes on e500mc/e5500
Signed-off-by: Liu Yu <yu.liu@freescale.com>
[stuart: factored this out from idle hcall support in host patch]
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:37 +02:00
Stuart Yoder
fdcf8bd7e7 KVM: PPC: use definitions in epapr header for hcalls
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:36 +02:00
Stuart Yoder
e13dcc1ab5 PPC: epapr: create define for return code value of success
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:36 +02:00
Christian Borntraeger
3d11df7abb KVM: s390: Fix vcpu_load handling in interrupt code
Recent changes (KVM: make processes waiting on vcpu mutex killable)
now requires to check the return value of vcpu_load. This triggered
a warning in s390 specific kvm code. Turns out that we can actually
remove the put/load, since schedule will do the right thing via
the preempt notifiers.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-27 18:19:53 +02:00
Jan Kiszka
c863901075 KVM: x86: Fix guest debug across vcpu INIT reset
If we reset a vcpu on INIT, we so far overwrote dr7 as provided by
KVM_SET_GUEST_DEBUG, and we also cleared switch_db_regs unconditionally.

Fix this by saving the dr7 used for guest debugging and calculating the
effective register value as well as switch_db_regs on any potential
change. This will change to focus of the set_guest_debug vendor op to
update_dp_bp_intercept.

Found while trying to stop on start_secondary.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-23 15:00:07 +02:00
Alex Williamson
7a84428af7 KVM: Add resampling irqfds for level triggered interrupts
To emulate level triggered interrupts, add a resample option to
KVM_IRQFD.  When specified, a new resamplefd is provided that notifies
the user when the irqchip has been resampled by the VM.  This may, for
instance, indicate an EOI.  Also in this mode, posting of an interrupt
through an irqfd only asserts the interrupt.  On resampling, the
interrupt is automatically de-asserted prior to user notification.
This enables level triggered interrupts to be posted and re-enabled
from vfio with no userspace intervention.

All resampling irqfds can make use of a single irq source ID, so we
reserve a new one for this interface.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-23 13:50:15 +02:00
Gleb Natapov
1e08ec4a13 KVM: optimize apic interrupt delivery
Most interrupt are delivered to only one vcpu. Use pre-build tables to
find interrupt destination instead of looping through all vcpus. In case
of logical mode loop only through vcpus in a logical cluster irq is sent
to.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 15:05:26 +03:00
Avi Kivity
1d86b5cc4c Merge branch 'queue' into next
* queue:
  KVM: MMU: Eliminate pointless temporary 'ac'
  KVM: MMU: Avoid access/dirty update loop if all is well
  KVM: MMU: Eliminate eperm temporary
  KVM: MMU: Optimize is_last_gpte()
  KVM: MMU: Simplify walk_addr_generic() loop
  KVM: MMU: Optimize pte permission checks
  KVM: MMU: Update accessed and dirty bits after guest pagetable walk
  KVM: MMU: Move gpte_access() out of paging_tmpl.h
  KVM: MMU: Optimize gpte_access() slightly
  KVM: MMU: Push clean gpte write protection out of gpte_access()
  KVM: clarify kvmclock documentation
  KVM: make processes waiting on vcpu mutex killable
  KVM: SVM: Make use of asm.h
  KVM: VMX: Make use of asm.h
  KVM: VMX: Make lto-friendly

Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 15:04:41 +03:00
Avi Kivity
c5421519f3 KVM: MMU: Eliminate pointless temporary 'ac'
'ac' essentially reconstructs the 'access' variable we already
have, except for the PFERR_PRESENT_MASK and PFERR_RSVD_MASK.  As
these are not used by callees, just use 'access' directly.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 13:00:10 +03:00
Avi Kivity
b514c30f77 KVM: MMU: Avoid access/dirty update loop if all is well
Keep track of accessed/dirty bits; if they are all set, do not
enter the accessed/dirty update loop.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 13:00:09 +03:00
Avi Kivity
71331a1da1 KVM: MMU: Eliminate eperm temporary
'eperm' is no longer used in the walker loop, so we can eliminate it.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 13:00:09 +03:00
Avi Kivity
6fd01b711b KVM: MMU: Optimize is_last_gpte()
Instead of branchy code depending on level, gpte.ps, and mmu configuration,
prepare everything in a bitmap during mode changes and look it up during
runtime.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 13:00:09 +03:00
Avi Kivity
13d22b6aeb KVM: MMU: Simplify walk_addr_generic() loop
The page table walk is coded as an infinite loop, with a special
case on the last pte.

Code it as an ordinary loop with a termination condition on the last
pte (large page or walk length exhausted), and put the last pte handling
code after the loop where it belongs.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 13:00:08 +03:00
Avi Kivity
97d64b7881 KVM: MMU: Optimize pte permission checks
walk_addr_generic() permission checks are a maze of branchy code, which is
performed four times per lookup.  It depends on the type of access, efer.nxe,
cr0.wp, cr4.smep, and in the near future, cr4.smap.

Optimize this away by precalculating all variants and storing them in a
bitmap.  The bitmap is recalculated when rarely-changing variables change
(cr0, cr4) and is indexed by the often-changing variables (page fault error
code, pte access permissions).

The permission check is moved to the end of the loop, otherwise an SMEP
fault could be reported as a false positive, when PDE.U=1 but PTE.U=0.
Noted by Xiao Guangrong.

The result is short, branch-free code.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 13:00:08 +03:00
Avi Kivity
8cbc70696f KVM: MMU: Update accessed and dirty bits after guest pagetable walk
While unspecified, the behaviour of Intel processors is to first
perform the page table walk, then, if the walk was successful, to
atomically update the accessed and dirty bits of walked paging elements.

While we are not required to follow this exactly, doing so will allow us
to perform the access permissions check after the walk is complete, rather
than after each walk step.

(the tricky case is SMEP: a zero in any pte's U bit makes the referenced
page a supervisor page, so we can't fault on a one bit during the walk
itself).

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 13:00:08 +03:00
Avi Kivity
3d34adec70 KVM: MMU: Move gpte_access() out of paging_tmpl.h
We no longer rely on paging_tmpl.h defines; so we can move the function
to mmu.c.

Rely on zero extension to 64 bits to get the correct nx behaviour.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 13:00:08 +03:00
Avi Kivity
edc2ae84eb KVM: MMU: Optimize gpte_access() slightly
If nx is disabled, then is gpte[63] is set we will hit a reserved
bit set fault before checking permissions; so we can ignore the
setting of efer.nxe.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 13:00:07 +03:00
Avi Kivity
8ea667f259 KVM: MMU: Push clean gpte write protection out of gpte_access()
gpte_access() computes the access permissions of a guest pte and also
write-protects clean gptes.  This is wrong when we are servicing a
write fault (since we'll be setting the dirty bit momentarily) but
correct when instantiating a speculative spte, or when servicing a
read fault (since we'll want to trap a following write in order to
set the dirty bit).

It doesn't seem to hurt in practice, but in order to make the code
readable, push the write protection out of gpte_access() and into
a new protect_clean_gpte() which is called explicitly when needed.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-20 13:00:07 +03:00
Stefan Fritsch
879238fecc KVM: clarify kvmclock documentation
- mention that system time needs to be added to wallclock time
- positive tsc_shift means left shift, not right
- mention additional 32bit right shift

Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-09-17 14:10:23 -03:00
Michael S. Tsirkin
9fc77441e5 KVM: make processes waiting on vcpu mutex killable
vcpu mutex can be held for unlimited time so
taking it with mutex_lock on an ioctl is wrong:
one process could be passed a vcpu fd and
call this ioctl on the vcpu used by another process,
it will then be unkillable until the owner exits.

Call mutex_lock_killable instead and return status.
Note: mutex_lock_interruptible would be even nicer,
but I am not sure all users are prepared to handle EINTR
from these ioctls. They might misinterpret it as an error.

Cleanup paths expect a vcpu that can't be used by
any userspace so this will always succeed - catch bugs
by calling BUG_ON.

Catch callers that don't check return state by adding
__must_check.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-09-17 13:46:32 -03:00
Avi Kivity
7454766f7b KVM: SVM: Make use of asm.h
Use macros for bitness-insensitive register names, instead of
rolling our own.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-09-17 10:38:05 -03:00
Avi Kivity
b188c81f2e KVM: VMX: Make use of asm.h
Use macros for bitness-insensitive register names, instead of
rolling our own.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-09-17 10:38:04 -03:00
Avi Kivity
83287ea420 KVM: VMX: Make lto-friendly
LTO (link-time optimization) doesn't like local labels to be referred to
from a different function, since the two functions may be built in separate
compilation units.  Use an external variable instead.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-09-17 10:38:03 -03:00
Takuya Yoshikawa
ecba9a52ac KVM: x86: lapic: Clean up find_highest_vector() and count_vectors()
find_highest_vector() and count_vectors():
 - Instead of using magic values, define and use proper macros.

find_highest_vector():
 - Remove likely() which is there only for historical reasons and not
   doing correct branch predictions anymore.  Using such heuristics
   to optimize this function is not worth it now.  Let CPUs predict
   things instead.

 - Stop checking word[0] separately.  This was only needed for doing
   likely() optimization.

 - Use for loop, not while, to iterate over the register array to make
   the code clearer.

Note that we actually confirmed that the likely() did wrong predictions
by inserting debug code.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-09-12 13:38:23 -03:00
Xiao Guangrong
7de5bdc96c KVM: MMU: remove unnecessary check
Checking the return of kvm_mmu_get_page is unnecessary since it is
guaranteed by memory cache

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-10 11:26:16 +03:00
Liu, Jinsong
92b5265d38 KVM: Depend on HIGH_RES_TIMERS
KVM lapic timer and tsc deadline timer based on hrtimer,
setting a leftmost node to rb tree and then do hrtimer reprogram.
If hrtimer not configured as high resolution, hrtimer_enqueue_reprogram
do nothing and then make kvm lapic timer and tsc deadline timer fail.

Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-10 11:10:03 +03:00
Jan Kiszka
7efd8fa145 KVM: Improve wording of KVM_SET_USER_MEMORY_REGION documentation
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-09 16:39:17 +03:00
Michael S. Tsirkin
a50abc3b2b KVM: use symbolic constant for nr interrupts
interrupt_bitmap is KVM_NR_INTERRUPTS bits in size,
so just use that instead of hard-coded constants
and math.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-06 18:37:44 +03:00
Gleb Natapov
b3356bf0db KVM: emulator: optimize "rep ins" handling
Optimize "rep ins" by allowing emulator to write back more than one
datum at a time. Introduce new operand type OP_MEM_STR which tells
writeback() that dst contains pointer to an array that should be written
back as opposite to just one data element.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-06 18:07:38 +03:00
Gleb Natapov
f3bd64c68a KVM: emulator: string_addr_inc() cleanup
Remove unneeded segment argument. Address structure already has correct
segment which was put there during decode.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-06 18:07:01 +03:00
Gleb Natapov
9d1b39a967 KVM: emulator: make x86 emulation modes enum instead of defines
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-06 18:07:01 +03:00
Gleb Natapov
716d51abff KVM: Provide userspace IO exit completion callback
Current code assumes that IO exit was due to instruction emulation
and handles execution back to emulator directly. This patch adds new
userspace IO exit completion callback that can be set by any other code
that caused IO exit to userspace.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-06 18:06:37 +03:00
Marcelo Tosatti
3b4dc3a031 KVM: move postcommit flush to x86, as mmio sptes are x86 specific
Other arches do not need this.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

v2: fix incorrect deletion of mmio sptes on gpa move (noticed by Takuya)
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-06 16:37:30 +03:00
Marcelo Tosatti
12d6e7538e KVM: perform an invalid memslot step for gpa base change
PPC must flush all translations before the new memory slot
is visible.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-06 16:37:27 +03:00
Marcelo Tosatti
2df72e9bc4 KVM: split kvm_arch_flush_shadow
Introducing kvm_arch_flush_shadow_memslot, to invalidate the
translations of a single memory slot.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-06 16:37:25 +03:00
Mathias Krause
09941fbb71 KVM: SVM: constify lookup tables
We never modify direct_access_msrs[], msrpm_ranges[],
svm_exit_handlers[] or x86_intercept_map[] at runtime.
Mark them r/o.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-05 12:42:14 +03:00
Mathias Krause
772e031899 KVM: VMX: constify lookup tables
We use vmcs_field_to_offset_table[], kvm_vmx_segment_fields[] and
kvm_vmx_exit_handlers[] as lookup tables only -- make them r/o.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-05 12:42:09 +03:00
Mathias Krause
f1d248315a KVM: x86: more constification
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-05 12:42:02 +03:00
Mathias Krause
0fbe9b0b19 KVM: x86: constify read_write_emulator_ops
We never change those, make them r/o.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-05 12:41:54 +03:00