Commit Graph

55381 Commits

Author SHA1 Message Date
Ernst Sjöstrand
803a1412fe drm/amd/amdgpu: Fix style issues in dcn20_resource.c
Inconsistent indentation and mixed use of brackets.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25 13:23:45 -05:00
Ernst Sjöstrand
ed9656fbc8 drm/amd/amdgpu: Check stream in amdgpu_dm_commit_planes
Reported by smatch:
amdgpu_dm.c:5637 amdgpu_dm_commit_planes() error: we previously assumed 'acrtc_state->stream' could be null
This seems to be checked for null pretty consistently elsewhere.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25 13:23:43 -05:00
Ernst Sjöstrand
70c5350a87 drm/amd/amdgpu: amdgpu_hwmon_show_temp: initialize temp
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:1496 amdgpu_hwmon_show_temp() error: uninitialized symbol 'temp'.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25 13:23:39 -05:00
Ernst Sjöstrand
616ae02f6c drm/amd/amdgpu: Fix amdgpu_set_pp_od_clk_voltage error check
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:693 amdgpu_set_pp_od_clk_voltage() error: uninitialized symbol 'ret'.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25 13:23:34 -05:00
Ernst Sjöstrand
0172591e21 drm/amd/amdgpu: Indent AMD_IS_APU properly
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/soc15.c:715 soc15_get_pcie_usage() warn: inconsistent indenting
And a similar one in si.c.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25 13:23:24 -05:00
Alex Deucher
a6bbc3d5ac drm/amdgpu/display: drop ifdefs around comments
No need to protect the comments.  The DCN1_01 config
was dopped anyway.  Got accidently brought back with the
navi merge.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25 13:23:17 -05:00
Alex Deucher
3e10f3196b drm/amdgpu/display: switch udelay to msleep
We may need to sleep for up to 80ms
(8ms per each of up to 10 loop iterations):

/* First DPCD read after VDD ON can fail if the particular board
 * does not have HPD pin wired correctly. So if DPCD read fails,
 * which it should never happen, retry a few times. Target worst
 * case scenario of 80 ms.
 */

Switch udelay to msleep to avoid limits on arm.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25 12:08:46 -05:00
Alex Deucher
44ff0ae6b1 drm/amdgpu/powerplay: FEATURE_MASK is 64 bit so use ULL
ULL is needed for 32 bit arches.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25 12:08:19 -05:00
Alex Deucher
d7929c1e13 Merge branch 'drm-next' into drm-next-5.3
Backmerge drm-next and fix up conflicts due to drmP.h removal.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25 08:42:25 -05:00
Andres Rodriguez
80d42db02b drm/edid: use for_each_displayid_db where applicable
Replace the duplicated versions of the while loop with the new macro.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619183033.6922-1-andresx7@gmail.com
2019-06-25 14:44:03 +10:00
Andres Rodriguez
e28ad544f4 drm/edid: parse CEA blocks embedded in DisplayID
DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.

This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.

This change fixes audio support for the Valve Index HMD.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.com
2019-06-25 14:32:26 +10:00
Dave Airlie
dfd03396d7 drm/tegra: Changes for v5.3-rc1
This contains a couple of small improvements and cleanups for the Tegra
 DRM driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl0M8jsTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoU0MEACZhCSKLvinuCw2pWdsc2A5rZN3r0Mr
 9TpdIKXYwcHO2G2gYC1mXv0wlp2pzIOr5y3VHLl1VboWXlPZjvgH0OiDtmwZk/vU
 jjFOGZO5ZjwyVNAZ8SlQrpdBNIAm3wseVfrhVURIL+9dANDgXsxWiqTkgnEmVclZ
 Kj2SpXfysTM9TJyXfQW8op6jKtP3NJ/IPEtTguNL1R9ho0phlcRYBUMEIYqtgBVE
 aRsjrrbM27OGf+JFPY3C7bW90hzgVqZLeK9R4AAMPS8iZ91k9njlFZ20LI9Yk/P1
 GBVyemiRtcG3owbli3NlfFzaeNjmM2PmcMZJsOyf6T+UH5juH2XZ/TV5O6i/jq0z
 /8DWsuFdEMX5tdP0t4B3vnbGQTYMOo/6bRsZHceLXcpKFNuJcC6lY233/Fc3D1bw
 gWm5ZHTs3SmPm2JoWmA54h2oiXU8/hGiPZGoUDHUTxf/h7DOGhK2hfaNdB6ZYXJu
 be4yS5TidFlFKi911JuXblCDeFf0VPsOfemQtJW4OvKg9FD6WmRuehYPytJ8ifB1
 dByXh5siOVMcyE0a2bsMPAvsxK6z4pPwyDz34AJUETJ0DSmSfWeEMSbCmpJwt6m5
 35IiMossSULJXWjqtc5bcK1gmbYMJSEwj+Xe33O+H67THSgo4GLxqKdb++5QK5Ky
 svluhQIjYYx3pw==
 =T2hU
 -----END PGP SIGNATURE-----

Merge tag 'drm/tegra/for-5.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v5.3-rc1

This contains a couple of small improvements and cleanups for the Tegra
DRM driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621150753.19550-1-thierry.reding@gmail.com
2019-06-25 12:59:43 +10:00
Dave Airlie
9b75276e4f Merge commit 'refs/for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next
Picking up pace on the upstreaming of Komeda driver, with quite a lot
of new features added this time. On top of that we have the small
cleanups and improved usage of the debugfs functions. Please pull!

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621095349.GI17204@e110455-lin.cambridge.arm.com
2019-06-25 12:56:40 +10:00
tiancyin
8ac875db0f drm/amdgpu: disable gfxoff on navi10
The gfxoff brings unstability, disable it by default

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-24 09:31:43 -05:00
Hawking Zhang
73c86d628d drm/amdgpu: fix modprobe failure for uvd_4/5/6
For uvd_4/5/6, amdgpu driver will only power on them when
there are jobs assigned to decode/enc rings.uvd_4/5/6 dpm was broken
since amdgpu_dpm_set_powergating_by_smu only covers gfx block.

The change would add more IP block support in amdgpu_dpm_set_powergating_by_smu
For GFX/UVD/VCN/VCE, if the new SMU driver is supported, invoke new
power gate helper function smu_dpm_set_power_gate, otherwise, fallback to
legacy powerplay helper function pp_set_powergating_by_smu. For other IP blocks
always invoke legacy powerplay helper function.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-24 09:29:59 -05:00
Alex Deucher
f3f48d7331 drm/amdgpu: drop unused df init callback
It was replaced with the sw_init callback so is no longer
needed.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Jonathan Kim
8f78f1b03e drm/amdgpu: add sw_init to df_v1_7
change df_init to df_sw_init df 1.7 to prevent regression issues on pre-vega20
products when callback is called in sw_common_sw_init.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Oak Zeng
d9848e149d drm/amdkfd: Set gws_mask to 64 bit 1s
Previous kfd doesn't use gws so this mask was set to 0.
Set it to 64 bit 1s because now kfd can use all 64 gws
resources.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
hersen wu
9cbee6eff8 drm/amd/display/dc: set num-dwb = 1 as navi10 asic cap
during navi10 bring up, dwb causes system hang.
to continue debug major issue, disable dwb by
set num-dwb = 0. the hang issue is not reproduced now
by enable num-dwb =1. dc source is shared by all os.
win needs num-dwb = 1.

Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Su Sung Chung
170a2398d2 drm/amd/display: make clk_mgr call enable_pme_wa
[why]
Before for raven and navi we are calling pp_smu functions for pme

[how]
refactor a code so we will call clk_mgr's enable_pme_wa function so we
can use pme_wa for future asics. This way we don't need to worry about
different ASIC since clk_mgr already have that information

Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Charlene Liu
7a5ab155d3 drm/amd/display: expose dentist_get_did_from_divider
for future use

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Dmytro Laktyushkin
c00d56fede drm/amd/display: add missing mod_vmid destructor
mod_vmid is missing a destructor.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Thomas Lim
1a7d296d16 drm/amd/display: Add Underflow Asserts to dc
[Why]
For debugging underflow issues it can be useful to have asserts when the
underflow initially occurs.

[How]
Read the underflow status registers after actions that have a high risk
of causing underflow and assert that no underflow occurred. If underflow
occurred, clear the bit.

Signed-off-by: Thomas Lim <Thomas.Lim@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Dmytro Laktyushkin
bda9afdacf drm/amd/display: move vmid determination logic to a module
Currently vmid is decided internally inside dc. With the introduction
of new asics we are required to coordinate vmid use with external
components.

This change converts vmid logic to a DAL module allowing vmid to be
passed in as a parameter to DC.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Charlene Liu
a6465d1f3b drm/amd/display: dcn2 use fixed clocks.
[Description]
dcn2 use fixed clocks and not program DPP CLK or Disp_CLK.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Charlene Liu
971ff2b433 drm/amd/display: add p010 and ayuv plane caps
for future use

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Jun Lei
6e17b5b8a8 drm/amd/display: update DCN2 uclk switch time
[why]
value commited to by HW team is going to be higher
than pre-silicon, and will cause underflow if driver not
updated

[how]
update hardcoded value, update pstate switching logic
to fix case where with long uclk time we won't allow switch
even when we should

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:14 -05:00
Nicholas Kazlauskas
cf020d49b3 drm/amd/display: Rework CRTC color management
[Why]
To prepare for the upcoming DRM plane color management properties
we need to correct a lot of wrong behavior and assumptions made for
CRTC color management.

The documentation added by this commit in amdgpu_dm_color explains
how the HW color pipeline works and its limitations with the DRM
interface.

The current implementation does the following wrong:
- Implicit sRGB DGM when no CRTC DGM is set
- Implicit sRGB RGM when no CRTC RGM is set
- No way to specify a non-linear DGM matrix that produces correct output
- No way to specify a correct RGM when a linear DGM is used

We had workarounds for passing kms_color tests but not all of the
behavior we had wrong was covered by these tests (especially when
it comes to non-linear DGM). Testing both DGM and RGM at the same time
isn't something kms_color tests well either.

[How]
The specifics for how color management works in AMDGPU and the new
behavior can be found by reading the documentation added to
amdgpu_dm_color.c from this patch.

All of the incorrect cases from the old implementation have been
addressed for the atomic interface, but there still a few TODOs for
the legacy one.

Note: this does cause regressions for kms_color@pipe-a-ctm-* over HDMI.

The result looks correct from visual inspection but the CRC no longer
matches. For reference, the test was previously doing the following:

linear degamma -> CTM -> sRGB regamma -> RGB to YUV (709) -> ...

Now the test is doing:

linear degamma -> CTM -> linear regamma -> RGB to YUV (709) -> ...

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Wesley Chalmers
043f5bb630 drm/amd/display: Use macro for invalid OPP ID
[WHY]
This is meant to make it clearer that 0xf is not a valid OPP ID, and
that code making use of OPP IDs should not accept this value.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Eric Bernstein
c5509aadcf drm/amd/display: expose enable dp output functions
expose this function for future use

Implementation of DCN3 DIO Link Encoder including
dpcs register headers.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Charlene Liu
a6132cb102 drm/amd/display: add dwb stere caps and version
add dwb stereo caps and ver for future use

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Eric Bernstein
779451a736 drm/amd/display: Alpha plane type
Add Alpha surface type for future use

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Jun Lei
5d36f78311 drm/amd/display: making DCN20 WM table non-overlapping
[why]
Existing behavior has overlapping ranges resulting in path
dependent SMU selection

[how]
Make ranges non-overlapping, resulting in non-path dependent
selection

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Wenjing Liu
e710fdb134 drm/amd/display: update dsc max_target_bpp to 16 bpp
[why]
According to the latest specs, the max_target bpp sink
can support is 16 bpp.

[how]
update dsc max_target_bpp to 16

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Charlene Liu
f82c916c41 drm/amd/display: add some parameters to validate bandwidth functions
required for new checks.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Wenjing Liu
39a4eb853f drm/amd/display: update DSC MST DP virtual DPCD peer device enumeration policy
[why]
Current policy assumes virtual DPCD peer device as
an individual MST branch device with 1 input and 1 output.
However this is only true for virtual DP-to-DP peer device.
In general there are three types of virtual DP peer devices.
1. Sink peer device with virtual DPCD.
2. Virtual DP-to-DP Peer device with virtual DPCD.
3. Virtual DP-to-HDMI Protocol Converter Peer Device with
Virtual DPCD.
So we should break the assumption and handle all three types.

[how]
DP-to-DP peer device will have virtual DPCD cap upstream.
Sink peer device will have virtual DPCD on the logical port.
Dp to HDMI protocol converter peer device will have virtual DPCD
on its converter port.
For DSC capable Synaptics non VGA port we workaround by enumerating
a virutal DPCD peer device on its upstream
even if it doesn't have one.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Jun Lei
2131f65581 drm/amd/display: add support for forcing DCFCLK without affecting watermarks
[why]
useful for debugging

[how]
plumb a debug option in dc

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Nicholas Kazlauskas
6f4992b0e2 drm/amd/display: Copy stream updates onto streams
[Why]
Almost every function in DC that works with stream state expects that
the current state on the stream is the one that it should be writing
out. These functions are typically triggered by specifying a particular
stream update - but the actual contents of the stream update itself
are ignored, leaving it to the DM to actually update the stream state
itself.

The problem with doing this in DM is a matter of timing. On Linux
most of this is incorrectly done in atomic check, when we actually want
it to be done during atomic commit tail while access to DC is locked.

To give an example, a commit requesting to modify color management
state for DM could come in, be rejected, but still have modified
the actual system state for the stream since it's shared memory. The
next time color management gets programmed it'll use the rejected
color management info - which might not even still be around if it's
a custom transfer function.

So a reasonable place to perform this is within DC itself and this is
the model that's currently in use for surface updates. DC can even
compare the current system state to the incoming surface update to
determine update level, something that can't currnetly be done with the
framework for stream updates.

[How]
Duplicate the framework used for surface updates for stream updates
as well. Copy all the updates after checking the update type.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Ilya Bakoulin
4f008d931b drm/amd/display: Fix incorrect vba type
SwathWidthCThisState is expected to be an unsigned int array.

Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Martin Leung
d8cd587d2b drm/amd/display: removing MODULO change for dcn2
[why]
when resetting pipes from 480p to dual-pipe 8k, modulo reg write for
video optimized rate updated one pipe without changing the other, causing
sync error

[how]
removed code from dcn2

Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Ilya Bakoulin
03fd87db6d drm/amd/display: Fix incorrect DML output_bpp value
[Why]
The output_bpp pipe parameter was assigned an incorrect value
(color depth enum), and subsequently used to overwrite
the OutputBpp parameter calculated by DML. Seems like this had no
effect except with DSC enabled, which would make DML produce
bad outputs.

[How]
Removed assignment to OutputBpp, fixed output_bpp assignment,
and properly set ForcedOutputLinkBPP instead of OutputBpp.
Also removed condition in DML that prevented forcing of
Output BPP with DSC enabled.

Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Jun Lei
3979efcec6 drm/amd/display: Add missing VM conversion from hw values
[why]
VM implemenation is missing conversion from HW values in hubbub
DM not passing actual PTB during flip

[how]
add proper HW conversion from logical values
fix cases where we programmed VA even though we are in PA
plumb in PTB from DM

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Ilya Bakoulin
a746a25855 drm/amd/display: Drive-by fixes for display_mode_vba
Fixes for the following:
- Incorrect pointer type (unsigned int instead of double)
- Incorrect DSC number of slices setting

Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:13 -05:00
Nikola Cornij
98ce8cc1b4 drm/amd/display: Enable DSC power-gating for DSC streams
[why]
Currently DSC power gating is disabled by default because the power
transition doesn't happen, causing a crash on some systems

[how]
Fix the lack of power state transition and enable DSC power gating
by default.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:12 -05:00
Charlene Liu
c3ec8ba537 drm/amd/display: Return UPDATE_TYPE_FULL on writeback update
Should do full update when display writeback is updated.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Duke Du <Duke.Du@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:12 -05:00
Wenjing Liu
ba32c50f04 drm/amd/display: decouple dsc adjustment out of enablement
[why]
dsc adjustment is allowed via stream update sequence.
dsc enablement is only allowed via commit stream sequence.
with the current unified dsc set function, it is hard
to determine which sequence it is called by.
The solution is to decouple dsc adjustment out of enablement
sequence so we can handle them separately.

[how]
decouple dsc adjustment out of enablement.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:12 -05:00
Jun Lei
1621f4c417 drm/amd/display: always use 4 dp lanes for dml
[why]
current DML logic uses currently trained setting for number
of dp lanes in DML calculations.  this is obviously flawed since
just because 1 lane is in use doesn't mean only 1 lane can be used

this causes mode validation to fail depending on current state,
which is incorrect

[how]
DML should always assume 4 lanes are available.  validation of
bandwidth is not supposed to be handled by DML, since we do
link validation without DML already

also, DML is expecting there to be a copy of the max state, this
state is removed when update_bounding_box is called to update
actual SKU clocks.  fix this as well by duping last state.

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Eric Yang <eric.yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:12 -05:00
Wesley Chalmers
278141f58e drm/amd/display: Use DCN2 functions instead of DCE
[WHY]
DCN code should make as few references to DCE as possible

[HOW]
Copy DCE110 implementation of find_first_free_match_stream_enc_for_link
into DCN10

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:12 -05:00
Wesley Chalmers
6936c8b1d4 drm/amd/display: DCN2 Engine-specifc encoder allocation
[WHY]
From DCE110 onward, we have the ability to assign DIG BE and FE
separately for any display connector type; before, we could only do this
for DP.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:12 -05:00
Nikola Cornij
b5d71c9396 drm/amd/display: Disable DSC power gating in Diags
[why]
With DSC power gating enabled, one of the register reads times out occasionally,
causing a DSC test to fail.

[how]
Disable DSC power gating in Diags.
NOTE: This has to be reverted once the problems with DSC power gating are
resolved.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22 09:34:12 -05:00