[Why]
This fixes an regression introduced by:
drm/amd/display: add stream ID and otg instance in dc_stream_state
During driver initialization, a null pointer deref is raised. This is
caused by searching for a stream status in the dc->current_state before
the dc_state swap happens at the end of dc_commit_state_no_check().
Since the swap has not happened, the dc_state to be swapped in should
be searched, and not dc->current_state.
[How]
Add a function that searches for the stream status within the given
dc_state, instead of dc->current_state. Use that before the state swap
happens in dc_commit_state_no_check().
Also remove duplicate occurrences of this function in amdgpu_dm.c.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
context->bw.dce.dispclk_khz is being cached into unpatched_clock, then
restored at end of function call. This is needlessly complex
[How]
Instead, use a local patched_clock variable. Leave
context->bw.dce.dispclk_khz alone.
No functional change is intended.
Signed-off-by: David Francis <david.francis@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are different reasons for Validation failure error during
atomic_check
[How]
Add better logging of the reason for validation failure
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Users would like more accurate pixel clocks, especially for fractional
"TV" frame rates like 59.94 Hz.
[How]
Store and communicate pixel clocks with 100 Hz accuracy from
dc_crtc_timing through to BIOS command table setpixelclock call.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There is an extra null check for fs_params in the
build_freesync_hdr function detected by Smatch.
[HOW]
1) Remove the extra null check since it is checked in the
caller.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's not being used anywhere.
[How]
Remove it.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ABM enablement testing can be automated if a way of reading
target and current hardware backlight is available
[How]
Expand debugfs interface with two new entries.
Hook directly into dc interface. Units are as
a fraction of 0x1000 = 100%
Use the built-in amdgpu function for creating
read-only debugfs files
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
stream ID allows DMs to avoid memory address comparisons to compare
stream equality.
otg_instance allows DC to more rigorously define when otg_instance
can change. specifically, it is now defined to be only mutable when dc_stream_state
changes. This is better than a "get status" function which prevents efficient
caching of otherwise very stable information.
[how]
stream ID follows similar pattern to sink ID, which is already implemented
otg_instance is an output which occurs on all dc_stream modification functions
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DV have made updates to DCN dml which we need to pull in
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Backlight is conceptually a property of links, not streams.
All backlight programming is done on links, but there is a
stream property bl_pwm_level that is used to restore backlight
on dpms on and s3 resume. This is unnecessary, as backlight
is already restored by hardware with no driver intervention.
[How]
Remove bl_pwm_level, and the stream argument to set_backlight
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They're not being used, so remove them.
Signed-off-by: Imad Syed <imad.syed@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dc_stream_state containing a pointer to sink is poor design.
Sink describes the display, and the specifications or capabilities
it has. That information is irrelevant for dc_stream_state, which describes
hardware state, and is generally used for hardware programming. It
could further be argued that dc_sink itself is just a convenience dc
provides, and DC should be perfectly capable of programming hardware
without any dc_sinks (for example, emulated sinks).
[how]
Phase 1:
Deprecate use of dc_sink pointer in dc_stream. Most references are trivial
to remove, but some call sites are risky (such as is_timing_changed) with
no obvious logical replacement. These will be removed in follow up change.
Add dc_link pointer to dc_stream. This is the typical reason DC really needed
sink pointer, and most call sites are replaced with this.
DMs also need minor updates, as all 3 DMs leverage stream->sink for
some functionality. this is replaced instead by a pointer to private data
inside dc_stream_state, which is used by DMs as a quality of life improvment
for some key functionality. it allows DMs to set pointers have to their own objects
which associate OS objects to dc_stream_states (such as DisplayTarget
and amdgpu_dm_connector). Without the private pointer, DMs would be
forced to perform a lookup for callbacks.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
So that we can adjust fclk for debugging purposes.
[How]
Add option to force adjust fclk request to pplib.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There was a recent fix in the BW spreadsheet to allow timing with very
large vblank. Need to be ported into driver.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We are not correctly handling the wrap around case.
VLine interrupt is relative to position of VUpdate interrupt.
Both VUpdate interrupt and VLine interrupt could possibly
be in front porch or back porch.
[How]
Fix wraparound case by checking for line number that is
greater than the VTOTAL of the OTG timing. In this case,
the interrupt should occur on the next frame.
Also fix some variable naming and remove some dead code.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver didn't check plane size and surface size is mismatch.
It will cause pitch data incorrect.
[How]
Add condition to check is plane change and update surface
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some components depend on dc to constuct
but need to assign callback functions to dc.
[how]
Instead of assigning dc callback functions in dc_create,
decouple the callback init to a standlone function after dc_create. This
is currently a no-op.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove braces around single-line conditionals
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To make sure future changes in DAL for SMU msgs will not change the current behaviour
and to make sure clock registeres are programmed correctly based on SMU msgs
that DAL sends.
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) Rename and make public definition of input CSC matrix struct.
2) Make wm_read_state() function an interface of hubbub, and check
if watermark registers exist before read/write to them.
3) Check if OTG_INTERLACE_CONTROL register exists before updating
4) Add dummy functions for set_input/output_transfer function to avoid
errors due to differences in CM registers.
5) Added missing register field definition in header file
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose this function for future use.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There isn't ucode when executing INVOKE command, so current code can't
check the failure of INVOKE command.
Remove the ucode check.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use sdma_engine[8] array instead of sdma_engine0~7 so it is easier
to program.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver get session id after loading TA FW and the session id is used
by driver instances to communicate with TA. PF and VF have different
session id.
xGMI session id should get from response buffer, correct it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kgd2kfd function pointers and global kgd2kfd pointer are no longer in use.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After amdkfd is merged into amdgpu module, amdgpu can call amdkfd
functions directly.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since amdkfd is merged into amdgpu module and amdgpu can access amdkfd
directly, move declaration of kgd2kfd functions from kfd_priv.h to
amdgpu_amdkfd.h
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We hit a problem with IOMMU with that. Disable until we have time to
debug further.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
effect asics: VEGA10 and VEGA12
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix CPDMA hang in PRT mode for both VEGA10 and VEGA20
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Tested-by: Yukun.Li <yukun1.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since soft min setting is enough. Hard min setting is redundant.
Reported-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure the clock level enforced is within the allowed
ranges.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since pp_od_clk_voltage device file is for OD related sysfs operations.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For those ASICs with no overdrive capabilities, the OD support flag
will be reset.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MGCG should RLC enter into safe mode first.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These 2 variables are unused now, so remove their references.
Fixes: e4ae0fc drm/amdgpu: implement gfx8 post_soft_reset
Fixes: 5e01c09 drm/amdgpu/gfx_v8_0: Reorder the gfx, kiq and kcq rings
test sequence
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kiq ring and the very first compute ring may fail occasionally
if they are tested directly following kiq_kcq_enable.
Insert the gfx ring test before kiq ring test to delay the kiq and kcq
ring tests will fix the issue.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pfvf exchange need be in exclusive mode. And add pfvf exchange in gpu
reset.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can avoid unexpected profile mode change after running
compute workload.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, no need to pin cursor bo.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display, no need to pin the fb's bo.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXDOTqAAKCRDj7w1vZxhR
xZ8QAQD4j8m9Ea3bzY5Rr8BYUx1k+Cjj6Y6abZmot2rSvdyOHwD+JzJFIFAPZjdd
uOKhLnDlubaaoa6OGPDQShjl9p3gyQE=
=WQGO
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-01-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: applied amdgpu merge fixup]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107180333.amklwycudbsub3s5@flea
-----BEGIN PGP SIGNATURE-----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=hFld
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Happy New Year, just decloaking from leave to get some stuff from the
last week in before rc1:
core:
- two regression fixes for damage blob and atomic
i915 gvt:
- Some missed GVT fixes from the original pull
amdgpu:
- new PCI IDs
- SR-IOV fixes
- DC fixes
- Vega20 fixes"
* tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits)
drm: Put damage blob when destroy plane state
drm: fix null pointer dereference on null state pointer
drm/amdgpu: Add new VegaM pci id
drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output
drm/amdgpu: add Vega20 PSP ASD firmware loading
drm/amd/display: Fix MST dp_blank REG_WAIT timeout
drm/amd/display: validate extended dongle caps
drm/amd/display: Use div_u64 for flip timestamp ns to ms
drm/amdgpu/uvd:Change uvd ring name convention
drm/amd/powerplay: add Vega20 LCLK DPM level setting support
drm/amdgpu: print process info when job timeout
drm/amdgpu/nbio7.4: add hw bug workaround for vega20
drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12
drm/amd/display: Optimize passive update planes.
drm/amd/display: verify lane status before exiting verify link cap
drm/amd/display: Fix bug with not updating VSP infoframe
drm/amd/display: Add retry to read ddc_clock pin
drm/amd/display: Don't skip link training for empty dongle
drm/amd/display: Wait edp HPD to high in detect_sink
drm/amd/display: fix surface update sequence
...
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mmu notifier contextual informations", v2.
This patchset adds contextual information, why an invalidation is
happening, to mmu notifier callback. This is necessary for user of mmu
notifier that wish to maintains their own data structure without having to
add new fields to struct vm_area_struct (vma).
For instance device can have they own page table that mirror the process
address space. When a vma is unmap (munmap() syscall) the device driver
can free the device page table for the range.
Today we do not have any information on why a mmu notifier call back is
happening and thus device driver have to assume that it is always an
munmap(). This is inefficient at it means that it needs to re-allocate
device page table on next page fault and rebuild the whole device driver
data structure for the range.
Other use case beside munmap() also exist, for instance it is pointless
for device driver to invalidate the device page table when the
invalidation is for the soft dirtyness tracking. Or device driver can
optimize away mprotect() that change the page table permission access for
the range.
This patchset enables all this optimizations for device drivers. I do not
include any of those in this series but another patchset I am posting will
leverage this.
The patchset is pretty simple from a code point of view. The first two
patches consolidate all mmu notifier arguments into a struct so that it is
easier to add/change arguments. The last patch adds the contextual
information (munmap, protection, soft dirty, clear, ...).
This patch (of 3):
To avoid having to change many callback definition everytime we want to
add a parameter use a structure to group all parameters for the
mmu_notifier invalidate_range_start/end callback. No functional changes
with this patch.
[akpm@linux-foundation.org: fix drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c kerneldoc]
Link: http://lkml.kernel.org/r/20181205053628.3210-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jason Gunthorpe <jgg@mellanox.com> [infiniband]
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.
This patch converts zone->managed_pages. Subsequent patches will convert
totalram_panges, totalhigh_pages and eventually managed_page_count_lock
will be removed.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
Link: http://lkml.kernel.org/r/1542090790-21750-3-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add PSP ASD firmware loading on Vega20. Not sure why
this was missing before.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
Some dongle doesn't have a valid extended dongle caps,
but we still set the extended dongle caps to be valid.
This causes validation fails for all timing.
[how]
If no dp_hdmi_max_pixel_clk is provided,
don't use extended dongle caps.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Resolves __udivdi3 missing errors when building for i386.
Fixes: 6378ef012ddc ("drm/amd/display: Add below the range support for FreeSync")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since umr tool can't handle bracket, change uvd ring name convention.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support manual LCLK DPM level switch on Vega20.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a job is timeout, try to print the related process information
for debugging
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Configure PCIE_CI_CNTL to work around a hw bug that affects
some multi-GPU compute workloads.
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Configure PCIE_CI_CNTL to work around a hw bug that affects
some multi-GPU compute workloads.
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
passive update planes still spends a litte more
time on some cases.
[How]
Remove unnecessary trace which involving in some register read.
Disable debug output for release build.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DP LL CTS1.4 4.3.2.1 test failure.
[how]
The failure is caused by not handling DP link loss
hpd short pusle during set mode. The change is to read link status
before set mode link training. If link is lost, re-verify link caps.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently, when the VSP infopacket is rebuilt in DM, it is not updated
when being programmed in encoder.
[HOW]
Add new VSP case for update_info_frame
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On customer board, there is one pluse (1v , < 1ms) on
DDC_CLK pin when plug / unplug DP cable. Driver will read
it and config DP to HDMI/DVI dongle.
[HOW]
If there is a real dongle, DDC_CLK should be always pull high.
Try to read again to recovery this special case. Retry times = 3.
Need additional 3ms to detect DP passive dongle(3 failures)
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Skipping initial link training will result in no verified link cap for
mode enumeration. Some versions of the BIOS seem to have PHY programming
sequence issue as well if initial link training is skipped, resulting in
a softlock in BIOS command table.
[How]
Identify the empty dongle hotplug case, and still do initial link
training.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In 99% user case, edp will be post by vbios.
In 1% / current case: Lenovo don't light up edp panel in vbios
post stage, vbios won't be lit up. Thus in dal when we init DCN
10 hw, we power up edp, then we start detect_sink, but internal
time is too short, when we detect it, HPD is still low, so we don't
detect the edp, and edp shows black.
[How]
When we init hw, we wait edp HPD to high after power up edp.
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An earlier change added update of interdependent dlg/ttu params for pipes
not being updated in the current call. The code fails to check if the other
pipes are actually active yet causing an assert.
This change adds a check for surface presence on the pipes before updating
the interdepenednt params.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
YCbCr420 packing format uses two chanels for luma, and 1
channel for both chroma component. Our previous implementation
did not account for this and results in every other pixel having
very high luma value, showing greyish color instead of black.
YCbCr444 = <Y1, Cb1, Cr1>; <Y2, Cb2, Cr2> .....
YCbCr420 = <Y1, Y2, Cb1>; <Y3, Y4, Cr1> .....
[How]
Program the second channel with the black color value for luma
as well.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC warns when a REG_WAIT takes a while and full-on errors
with stack dump on REG_WAIT timeout. Most of the time it isn't
a real issue.
[How]
Make DC cool its jets - taking a while is a debug message (because
it is not something that normal users should need to be aware of),
and timeouts are warnings (because it technically shouldn't
happen, but it's not a big deal if it does)
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a dual channel format and should be treated like other
video formats
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In certain configurations, such as PX configs or some Vega20 parts
DC gets created without connectors.
[How]
Drop the dm_error print when no connectors.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When XGMI is enabled, the DP reference clock needs to be adjusted
according to the XGMI spread spectrum percentage and mode. But first,
we need the ability to fetch this info.
[How]
Within the BIOS parser, Read from vBIOS when XGMI SS info is requested.
In addition, diags build uses include_legacy/atomfirmware.h for the
smu_info_v3_3 table headers. Update that as well.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We'll need a way to differentiate Vega 20 in DC
[How]
Add a DCE_VERSION_12_1 enum, which will be returned as the DC version if
the ASIC used is a Vega 20.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the flip-rate is below the minimum supported variable refresh rate
range for the monitor the front porch wait will timeout and be
frequently misaligned resulting in stuttering and/or flickering.
The FreeSync module can still maintain a smooth and flicker free
image when the monitor has a refresh rate range such that the maximum
refresh > 2 * minimum refresh by utilizing low framerate compensation,
"below the range".
[How]
Hook up the pre-flip and post-flip handlers from the FreeSync module.
These adjust the minimum/maximum vrr range to duplicate frames
when appropriate by tracking flip timestamps.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The visual corruption due to low display clock value observed on some
systems
[How]
There was earlier patch for dspclk:
'drm/amd/display: Raise dispclk value for dce_update_clocks'
Adding +15% workaround also to to dce112_update_clocks
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Leo Li <Sunpeng.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The behavior of drm_atomic_helper_cleanup_planes differs depending on
whether the commit was asynchronous or not. When it's called from
amdgpu_dm_atomic_commit_tail during a typical atomic commit the
plane state has been swapped so it calls cleanup_fb on the old plane
state.
However, in the asynchronous commit codepath the call to
drm_atomic_helper_commit also calls dm_plane_helper_cleanup_fb after
atomic_async_update has been called. Since the plane state is updated
in place and has not been swapped the cleanup_fb call affects the new
plane state.
This results in a use after free for the given sequence:
- Fast update, fb1 pin/ref, fb1 unpin/unref
- Fast update, fb2 pin/ref, fb2 unpin/unref
- Slow update, fb1 pin/ref, fb2 unpin/unref
- Fast update, fb2 pin/ref -> use after free. bug
[How]
Disallow framebuffer changes in the fast path. Since this includes
a NULL framebuffer, this means that only framebuffers that have
been previously pin+ref at least once will be used, preventing a
use after free.
This has a significant throughput reduction for cursor updates where
the framebuffer changes. For most desktop usage this isn't a problem,
but it does introduce performance regressions for two specific IGT
tests:
- cursor-vs-flip-toggle
- cursor-vs-flip-varying-size
Fixes: 2cc751931afc ("drm/amd/display: Add fast path for cursor plane updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It should not return 0 for error case as '0' is actually
a special value for index.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On errors, dma_buf_get returns a negative error code, rather than NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If register value is updating, reset timeout counter.
It improves robustness of SOC15_WAIT_ON_RREG.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove bit 31 for scratch2 to indicate the Hardware bug work around is active.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Scan enc/jpeg fences to init dpg pause new state in begin use.
It will help set dpg mode to desire state actively.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always check all vcn ring status during dpg mode stop, it will help
identify which vcn ring may cause the issue.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is a bug fix.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under Dynamic Power Gate mode, UVD_STATUS needn't be checked.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace vcn_v1_0_stop with vcn_v1_0_set_powergating_state during suspend,
to keep adev->vcn.cur_state update. It will fix VCN S3 hung issue.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It indicates a pin/unpin imbalance bug somewhere. While the bug isn't
necessarily in the call chain hitting this, it's at least one part
involved.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Page queue is supported on Vega20 with SDMA firmware
123 onwards.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vega20 uses ring id 1 for page queues EOP irq while previous
ASICs take ring id 3.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need new invalidation engine layout due to new SDMA page
queues added.
V2: fix coding style and add correct return value
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As two more SDMA page queue rings are added on Vega20.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the fence is already signaled it is perfectly normal to get a NULL
fence here. But since we can't export that we need to use a stub fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently driver only psp v11 support vmr.
v2: squash in unused variable removal (Alex)
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If PSP FW is running already, driver will not load PSP FW again and skip
it. So psp fw version is not correct if reading it from FW binary file,
need to get right version from register.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to access register such as mmSMC_IND_INDEX_11
and mmSMC_IND_DATA_11, PCIE_INDEX, PCIE_DATA through KIQ because
they are VF-copy.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
XGMI hive put kfd_pre_reset into amdgpu_device_lock_adev,
but outside req_full_gpu of sriov.
It would make sriov hang during reset.
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[airlied: make etnaviv build again]
amdgpu:
- DC trace support
- More DC documentation
- XGMI hive reset support
- Rework IH interaction with KFD
- Misc fixes and cleanups
- Powerplay updates for newer polaris variants
- Add cursor plane update fast path
- Enable gpu reset by default on CI parts
- Fix config with KFD/HSA not enabled
amdkfd:
- Limit vram overcommit
- dmabuf support
- Support for doorbell BOs
ttm:
- Support for simultaneous submissions to multiple engines
scheduler:
- Add helpers for hw with preemption support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207233119.16861-1-alexander.deucher@amd.com
[Why]
Legacy cursor plane updates from drm helpers go through the full
atomic codepath. A high volume of cursor updates through this slow
code path can cause subsequent page-flips to skip vblank intervals
since each individual update is slow.
This problem is particularly noticeable for the compton compositor.
[How]
A fast path for cursor plane updates is added by using DRM asynchronous
commit support provided by async_check and async_update. These don't do
a full state/flip_done dependency stall and they don't block other
commit work.
However, DC still expects itself to be single-threaded for anything
that can issue register writes. Screen corruption or hangs can occur
if write sequences overlap. Every call that potentially perform
register writes needs to be guarded for asynchronous updates to work.
The dc_lock mutex was added for this.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106175
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since this is not needed any more on the latest SMC firmware.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I retested Bonaire (gfx7 dGPU) and it works fine.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
These properties aren't being carried over when the atomic state.
This tricks atomic check and commit tail into performing underscan
and scaling operations when they aren't needed.
With the patch that forced scaling/RMX_ASPECT on by default this
results in many unnecessary surface updates and hangs under certain
conditions.
[How]
Duplicate the properties.
Fixes: 91b66c47ba ("drm/amd/display: Set RMX_ASPECT as default")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the "max bpc" isn't explicitly set in the atomic state then it
have a value of 0. This has the correct behavior of limiting a panel
to 8bpc in the case where the panel supports 8bpc. In the case of eDP
panels this isn't a true assumption - there are panels that can only
do 6bpc.
Banding occurs for these displays.
[How]
Initialize the max_bpc when the connector resets to 8bpc. Also carry
over the value when the state is duplicated.
Bugzilla: https://bugs.freedesktop.org/108825
Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 91b66c47ba.
Forcing RMX_ASPECT as default uses the preferred/native mode's timings
for any mode the user selects and scales the image. This provides a
a consistently nicer result in the case where the selected mode's
refresh rate matches the native mode's refresh but this isn't always
the case.
For example, if the monitor is 1080p@144Hz and the preferred mode is
60Hz then even if the user selects 1080p@144Hz as their selected mode
they'll get 1080p@60Hz.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function was renamed in a previous commit. Update the stub
function name for builds with CONFIG_HSA_AMD disabled.
Fixes: 611736d844 ("drm/amdgpu: Add KFD VRAM limit checking")
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If CS is submitted using guilty ctx, we terminate amdgpu_cs_parser_init
before locking ctx->lock, latter in amdgpu_cs_parser_fini we still are
trying to release the lock just becase parser->ctx != NULL.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of EVV cks-off voltages, avfs cks-off voltages can avoid
the overshoot voltages when switching sclk.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Some new variants require different firmwares.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
New vega10 ids.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function 'gfx_v8_0_pre_soft_reset':
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:4950:27: warning:
variable 'srbm_soft_reset' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function 'gfx_v8_0_post_soft_reset':
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:5054:27: warning:
variable 'srbm_soft_reset' set but not used [-Wunused-but-set-variable]
It never used since introduction in commit d31a501ead ("drm/amdgpu: add
pre_soft_reset ip func") and e4ae0fc336 ("drm/amdgpu: implement
gfx8 post_soft_reset")
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
driver need to reserve resource for each ctx for
some hw features. so add this limitation.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLC will go wrong in soft_reset under sriov
Workaroound: only need to init RLC csb, and skip RLC stop, reset, start
this is because host-driver has already done full initialization on RLC
v2: squash in build fix
Signed-off-by: Tiecehng Zhou <Tiecheng.Zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When everyone implements it exactly the same way, among all 4
implementations, there's not really a need to overwrite this at all.
Aside: drm_kms_helper_hotplug_event is pretty much core functionality
at this point. Probably should move it there.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128221234.15054-1-daniel.vetter@ffwll.ch
The GMC/VM subsystem is causing the faults, so move the handling here as
well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
printk_ratelimit() is much better suited to limit the number of reported
VM faults.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to filter out VM faults in the GMC code.
v2: don't filter out all faults
v3: fix copy&paste typo, send all IV to the KFD, don't change message level
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows user mode to map doorbell pages into GPUVM address space.
That way GPUs can submit to user mode queues (self-dispatch).
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is used for interoperability between ROCm compute and graphics
APIs. It allows importing graphics driver BOs into the ROCm SVM
address space for zero-copy GPU access.
The API is split into two steps (query and import) to allow user mode
to manage the virtual address space allocation for the imported buffer.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
top_dev->gpu is NULL for CPUs. Avoid dereferencing it if NULL.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't want KFD processes evicting each other over VRAM usage.
Therefore prevent overcommitting VRAM among KFD applications with
a per-GPU limit. Also leave enough room for page tables on top
of the application memory usage.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid including mmu_context.h in amdgpu_amdkfd.h since that may be
included in other header files that define traces. This leads to
conflicts due to traces defined in other headers included via
mmu_context.h.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY] clarify dal input parameters to pplib interface, remove
un-used parameters. dal knows exactly which parameters needed
and their effects at pplib and smu sides.
current dal sequence for dcn1_update_clock to pplib:
1.smu10_display_clock_voltage_request for dcefclk
2.smu10_display_clock_voltage_request for fclk
3.phm_store_dal_configuration_data {
set_min_deep_sleep_dcfclk
set_active_display_count
store_cc6_data --- this data never be referenced
new sequence will be:
1. set_display_count --- need add new pplib interface
2. set_min_deep_sleep_dcfclk -- new pplib interface
3. set_hard_min_dcfclk_by_freq
4. set_hard_min_fclk_by_freq
after this code refactor, smu10_display_clock_voltage_request,
phm_store_dal_configuration_data will not be needed for rv.
[HOW] step 1: add new functions at pplib interface
step 2: add new functions at amdgpu dm and dc
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ring_soft_recovery would have Call-Trace,
when s_fence->parent was NULL inside amdgpu_job_timedout.
Check fence first, as drm_sched_hw_job_reset did.
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP ring need to be destroy before starting reinit for vf.
This patche move it from hypervisor driver into guest.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP only support VMR ring for SRIOV vf since v45 and all commands will
be send to VMR ring for executing.
VMR ring use C2PMSG 101 ~ 103 instead of C2PMSG 64 ~ 71.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If PSP FW is running already, driver will not load PSP FW again and skip
it. So psp fw version is not correct if reading it from FW binary file,
need to get right version from register.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to drop the extra reserve in TTM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And drop the now superflous extra reservations.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is perfectly possible that the BO list is created before the BO is
exported. While at it clean up setting shared to one instead of true.
v2: add comment and simplify logic
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Let's support simultaneous submissions to multiple engines.
v2: rename the field to num_shared and fix up all users
v3: rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Picasso && AM4 SOCKET board, we use picasso_rlc_am4.bin
For Picasso && FP5 SOCKET board, we use picasso_rlc.bin
Judgment method:
PCO AM4: revision >= 0xC8 && revision <= 0xCF
or revision >= 0xD8 && revision <= 0xDF
otherwise is PCO FP5
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if the MC firmware supports FFC and tell the SMC so
mclk switching is handled properly.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some new variants require updated firmware.
V2: add MODULE_FIRMWARE for new firmwares
Reviewed-by: Huang Rui <ray.huang@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
For a lot of use cases we need 64bit sequence numbers. Currently drivers
overload the dma_fence structure to store the additional bits.
Stop doing that and make the sequence number in the dma_fence always
64bit.
For compatibility with hardware which can do only 32bit sequences the
comparisons in __dma_fence_is_later only takes the lower 32bits as significant
when the upper 32bits are all zero.
v2: change the logic in __dma_fence_is_later
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/266927/
UAPI Changes:
Core Changes:
- Add dma_fence_get_stub to dma-buf, and use it in drm/syncobj.
- Add and use DRM_MODESET_LOCK_BEGIN/END helpers.
- Small fixes to drm_atomic_helper_resume(), drm_mode_setcrtc() and
drm_atomic_helper_commit_duplicated_state()
- Fix drm_atomic_state_helper.[c] extraction.
Driver Changes:
- Small fixes to tinydrm, vkms, meson, rcar-du, virtio, vkms,
v3d, and pl111.
- vc4: Allow scaling and YUV formats on cursor planes.
- v3d: Enable use of the Texture Formatting Unit, and fix
prime imports of buffers from other drivers.
- Add support for the AUO G101EVN010 panel.
- sun4i: Enable support for the H6 display engine.
-----BEGIN PGP SIGNATURE-----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=t02J
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-12-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Final changes to drm-misc-next for v4.21:
UAPI Changes:
Core Changes:
- Add dma_fence_get_stub to dma-buf, and use it in drm/syncobj.
- Add and use DRM_MODESET_LOCK_BEGIN/END helpers.
- Small fixes to drm_atomic_helper_resume(), drm_mode_setcrtc() and
drm_atomic_helper_commit_duplicated_state()
- Fix drm_atomic_state_helper.[c] extraction.
Driver Changes:
- Small fixes to tinydrm, vkms, meson, rcar-du, virtio, vkms,
v3d, and pl111.
- vc4: Allow scaling and YUV formats on cursor planes.
- v3d: Enable use of the Texture Formatting Unit, and fix
prime imports of buffers from other drivers.
- Add support for the AUO G101EVN010 panel.
- sun4i: Enable support for the H6 display engine.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: added drm/v3d: fix broken build to the merge commit]
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/321be9d3-ab75-5f92-8193-e5113662edef@linux.intel.com
amdgpu and amdkfd:
- Freesync support
- ABM support in DC
- KFD support for vega12 and polaris12
- Add sdma paging queue support for vega
- Use ACPI to query backlight range on supported platforms
- Clean up doorbell handling
- KFD fix for pasid handling under non-HWS
- Misc cleanups and fixes
scheduler:
- Revert "fix timeout handling v2"
radeon:
- Fix possible overflow on 32 bit
ttm:
- Fix for LRU handling for ghost objects
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130192505.2946-1-alexander.deucher@amd.com
kfree(NULL) is safe, so removes NULL check before freeing the mem.
This patch also fix the ifnullfree.cocci warnings.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Alex Deucher <alexander.deucher@amd.com>
CC: christian.koenig@amd.com
CC: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
CC: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
CC: Lyude Paul <lyude@redhat.com>
CC: Rex Zhu <Rex.Zhu@amd.com>
CC: Jim Qu <Jim.Qu@amd.com>
CC: amd-gfx@lists.freedesktop.org
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In particular, we need the mmMC_VM_XGMI_LFB_CNTL register, for
determining if xGMI is enabled on VG20. This will be used by DC to
determine the correct spread spectrum adjustment for display and audio
clocks.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SI does not use doorbells, move asic doorbell init later
asic check.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=108920
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update switch limit on newer polaris variants. This may fix
flickering with high refresh rates with mclk switching enabled.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Tracing is a useful and cheap debug functionality
[How]
This creates a new trace system amdgpu_dm, currently with
three trace events
amdgpu_dc_rreg and amdgpu_dc_wreg report the address and value
of any dc register reads and writes
amdgpu_dc_performance requires at least one of those two to be
enabled. It counts the register reads and writes since the
last entry
v2: Don't check for NULL before kfree
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace vcn_v1_0_stop with vcn_v1_0_set_powergating_state during suspend,
to keep adev->vcn.cur_state update. It will fix VCN S3 hung issue.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 9a09a42369.
The whole interface isn't thought through. Since this function can't
fail we actually can't allocate an object to store the sync point.
Sorry, I should have taken the lead on this from the very beginning and
reviewed it more thoughtfully. Going to propose a new interface as a
follow up change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265580/
[Why]
New GCC warnings for stringop-truncation and stringop-overflow help
catch common misuse of strncpy. This patch suppresses these warnings
by fixing bugs identified by them.
[How]
Since the parameter passed for name in amdpgu_dm_create_common_mode has
no fixed length, if the string is >= DRM_DISPLAY_MODE_LEN then
mode->name will not be null-terminated.
The truncation in fill_audio_info won't actually occur (and the string
will be null-terminated since the buffer is initialized to zero), but
the warning can be suppressed by using the proper buffer size.
This patch fixes both issues by using the real size for the buffer and
making use of strscpy (which always terminates).
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add protection code to avoid lower frequency trigger over drive.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KIQ in VF’s init delayed by another VF’s reset,
which would cause late_init failed occasionally.
MAX_KIQ_REG_TRY enlarged from 20 to 80 would fix this issue.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_xgmi_update_topology is called both on device registration
and reset. Fix misleading print since the device is added only once to
the hive on registration and not on reset.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some case, no need to force SoftMin/Max settings for all DPMs.
It's OK to force on some specific DPM only.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For display config change event only, pre-display config settings are
needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New pptable upload through sysfs interface is supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some power features rely on the driver loaded version so always
load the MC firmware from the driver even if the vbios loaded
a version already.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Some variants require different MC firmware images.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Use per hive wq to concurrently send reset commands to all nodes
in the hive.
v2:
Switch to system_highpri_wq after dropping dedicated queue.
Fix non XGMI code path KASAN error.
Stop the hive reset for each node loop if there
is a reset failure on any of the nodes.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
XGMI hive has some resources allocted on device init which
needs to be deallocated when the device is unregistered.
v2: Remove creation of dedicated wq for XGMI hive reset.
v3: Use the gmc.xgmi.supported flag
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No point in use mdelay unless running from interrupt context (which we are not)
This is busy wait which will block the CPU for the entirety of the wait time.
Also, reduce wait time to 500ms as it is done in refernce code because
1s might cause PSP FW TO issues during XGMI hive reset.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We ignored the return code here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is unused.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use this to track whether an asic supports xgmi rather than
checking the asic type everywhere.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some new variants require updated firmware.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Instead of delaying that to the first query. Otherwise we could try to use the
SDMA for VM updates before the IB tests are done.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like it was missed when setting support was added.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To prepare for clock debug logging. With the exception of removing
max_supported_dppclk_khz from logs, there are no functional changes.
[How]
Add clk_bypass struct and clean up buffer logic
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Su Chung <Su.Chung@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Fatemeh Darbehani <Fatemeh.Darbehani@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dce100 was set to always pass safe_to_lower = false
to the clock manager
Thus, on suspend the clocks were not being set to 0
which is incorrect behaviour
This was causing s3 resume to blackscreen on intel
CPUs with dce100 GPUs attached
(Note that the hash in this Fixes: tag is the hash on Alex's tree)
Fixes: ae7d8aeb38d7 ("drm/amd/display: remove safe_to_lower flag from dc, use 2 functions instead")
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dithering needs to be enabled or disabled as requested. If
dc_stream_update->dither_option is non-null, program the FMT blocks.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When running igt@kms_plane@pixel-format-pipe-* tests the CRC read will
time out and the test will fail.
This is because the CRTC is duplicated but the crc_enabled parameter
isn't copied over to the new dm_crtc_state. CRC reads will time out
because amdgpu_dm_crtc_handle_crc_irq will no longer call
drm_crtc_add_crc_entry.
[How]
Copy crc_enabled when duplicating the state.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
add customizable log with a message input, which is for adding
test log in debugging as printf function in ETW.
[Usage]
EVENT_LOG_CUST_MSG1("TestLog","Hello World %d=0x%x", 123, pDC);
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For more clear usage in future
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY] fbc is within the data path from memory to dce. while
re-configure mc dmif, fbc should be enabled. otherwise, fbc
may not be enabled properly.
[HOW] before re-configure mc dmif, disable fbc, only after
dmif re-configuration fully done, enable fbc again.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Use provided infopacket in stream (if valid) instead of reconstructing
in set_vendor_info_packet()
* Use proper format for enums
* Use dc info packet struct instead
Signed-off-by: Harmanprit Tatla <Harmanprit.Tatla@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Failure to read Detailed Capabilities Info.
[How]
Read Detailed Capbilities Info 80h-08Fh.
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use axis instead of axix
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This patch is for use by dm, no need for it in dc.
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are a lot of unintuitive parts of the dm-dc interface.
It would help us if these were documented to provide
a common understanding of what they are supposed to do
[How]
Most of this documentation is stubs, to be filled out more
thoroughly by the experts
Not every dm-accessible function and struct is mentioned.
Simple functions like getters, setters, retain, release,
create, destroy can be left unadorned.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When there are multiple aux transaction in parallel, it is sometime
sporadically the aux transaction starts to continuously fail. The
aux transaction was failing because the busy bit for the given gpio
pin was always set. The busy bit was alway set because the
programming sequence to read, modify and write busy bit was not
atomic. Due to which when multiple threads are trying to modify the
busy bits for their gpio pins in the same integer variable sometimes
the busy bits integer variable is written with old data causing
failure.
[how]
Instead of using individual bits to track gpio pins and grouping
them to integers, one byte will be allcoated for each gpio pin.
Now whenever a gpio pin needs to be set to mark being used, only
writing a value of one to that byte is sufficient, other bytes
are not impacted. Also no need to have atomicity with bytes unlike
with bits.
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of delaying that to the first query. Otherwise we could try to use the
SDMA for VM updates before the IB tests are done.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like it was missed when setting support was added.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When paging queue is enabled, it use the second page of doorbell.
The AMDGPU_DOORBELL64_MAX_ASSIGNMENT definition assumes all the
kernel doorbells are in the first page. So with paging queue enabled,
the total kernel doorbell range should be original num_doorbell plus
one page (0x400 in dword), not *2.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With scaling, underscan and abm changes we can end up calling
commit_planes_to_stream in commit_tail. This call uses dm_state->context
which can be NULL if the commit was a fast update.
[How]
Use dc_state instead since that can't be NULL unless the system ran
out of memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108912
Fixes: e64abff2f133 ("drm/amd/display: Use private obj helpers for dm_atomic_state")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
More than 4x4K didn't lightup on Vega20 due to low dcfclk value.
Powerplay expects valid min requirement for dcfclk from DC.
[How]
Update min_dcfclock_khz based on min_engine_clock value.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
More than 4x4K didn't lightup on Vega20 due to low dcfclk value.
Powerplay expects valid min requirement for dcfclk from DC.
[How]
Update min_dcfclock_khz based on min_engine_clock value.
v2: backport to 4.20 (Alex)
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the "max bpc" isn't explicitly set in the atomic state then it
have a value of 0. This has the correct behavior of limiting a panel
to 8bpc in the case where the panel supports 8bpc. In the case of eDP
panels this isn't a true assumption - there are panels that can only
do 6bpc.
Banding occurs for these displays.
[How]
Initialize the max_bpc when the connector resets to 8bpc. Also carry
over the value when the state is duplicated.
Bugzilla: https://bugs.freedesktop.org/108825
Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlv7H/seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhasH/AvNibkzTAPQR7jE
r/R7NIaFUdPpaHYpLpoYIdSWkqpeWtN3q4eldJKWcpFCaE83EzDVu1PRw79rt/lm
JIYbZ2SZWbTB7d2TLEiEF2bFXr+OF8MVc1tSAsP5xTMvV6mIz7+i2xr9R0D4YrKY
ejd+ExF3HimuRf557Uey1MGsRIhedHsHjHbWjvR1MuKzvUv9nAL+1E2KJbfPXacp
LGXElCYcPXoKw+GxMS7C28idgLoEJoS/eVieRiMGsGlgEe/MuaNMU+GRLMde9lI0
c/G/4uumJTHVY7npOjuNt1+2FoLVt8oLlhPcB06R7FIwJN+TupLQifqBkIe2saT6
R6ExonQ=
=+/RR
-----END PGP SIGNATURE-----
Merge v4.20-rc4 into drm-next
Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
There are spelling mistakes in PP_ASSERT_WITH_CODE messages, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For XGMI hive case do reset in steps where each step iterates over
all devs in hive. This especially important for asic reset
since all PSP FW in hive must come up within a limited time
(around 1 sec) to properply negotiate the link.
Do this by refactoring amdgpu_device_gpu_recover and amdgpu_device_reset
into pre_asic_reset, asic_reset and post_asic_reset functions where is part
is exectued for all the GPUs in the hive before going to the next step.
v2: Update names for amdgpu_device_lock/unlock functions.
v3: Introduce per hive locking to avoid multiple resets for GPUs
in same hive.
v4:
Remove delayed_workqueue()/ttm_bo_unlock_delayed_workqueue() - they
are copy & pasted over from radeon and on amdgpu there isn't
any reason for that any more.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's needed for device reset of entire hive.
v3:
Add per hive lock to allow avoiding duplicate resets triggered by
multiple members of same hive.
Expose amdgpu_hive_info instead of adding getter functions.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is prep work for updating each PSP FW in hive after
GPU reset.
Split into build topology SW state and update each PSP FW in the hive.
Save topology and count of XGMI devices for reuse.
v2: Create seperate header for XGMI.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for AMDGPU specific FreeSync properties and ioctls are dropped
from amdgpu_dm in favor of supporting drm variable refresh rate
properties.
The notify_freesync and set_freesync_property functions are dropped
from amdgpu_display_funcs.
The drm vrr_capable property is now attached to any DP/HDMI connector.
Its value is updated accordingly to the connector's FreeSync capabiltiy.
The freesync_enable logic and ioctl control has has been dropped in
favor of utilizing the vrr_enabled on the drm CRTC. This allows for more
fine grained atomic control over which CRTCs should support variable
refresh rate.
To handle state changes for vrr_enabled it was easiest to drop the
forced modeset on freesync_enabled change. This patch now performs the
required stream updates when planes are flipped.
This is done for a few reasons:
(1) VRR stream updates can be done in the fast update path
(2) amdgpu_dm_atomic_check would need to be hacked apart to check
desired variable refresh state and capability before the CRTC
disable pass.
(3) Performing VRR stream updates on-flip is needed for enabling BTR
support.
VRR packets and timing adjustments are now tracked and compared to
previous values sent to the hardware.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When variable refresh rate is active the hardware counter can return
a position >= vtotal. This results in a vpos being returned from
amdgpu_display_get_crtc_scanoutpos that's a positive value. The
positive value indicates to the caller that the display is
currently in scanout when the display is actually still in vblank.
This is because the vfront porch duration is unknown with variable
refresh active and will end when either a page flip occurs or the
timeout specified by the driver/display is reached.
The behavior of the amdgpu_display_get_crtc_scanoutpos remains the
same when the position is below vtotal. When the position is above
vtotal the function will return a value that is effectively -vbl_end,
the size of the vback porch.
The only caller affected by this change is the DRM helper for
calculating vblank timestamps. This change corrects behavior for
calculating the page flip timestamp from being the previous timestamp
to the calculation to the next timestamp when position >= vtotal.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move doorbell structures, enum definitions and helper functions
from amdgpu.h to amdgpu_doorbell.h. No functional change
Signed-off-by: Oak Zeng <ozeng@amd.com>
Proposed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASIC specific doorbell layout is used instead of enum definition
Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also call functioin amdgpu_device_doorbell_init after
amdgpu_device_ip_early_init because the former depends
on the later to set up asic-specific init_doorbell_index
function
Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This introduces new doorbell layout for vega20 and future asics
v2: Use enum definition instead of hardcoded value
Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize doorbell index for asics vi and cik
v2: Use enum definition instead of hardcoded number
Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Use enum definition instead of hardcoded value
v3: Remove unused enum definition
Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is preparation to move doorbell index initialization
to amdgpu_asic_funcs
Signed-off-by: Oak Zeng <ozeng@amd.com>
Proposed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a preparation work to make reserved doorbell index per device,
instead of using a global macro definition. By doing this, we can easily
change doorbell layout for future ASICs while not affecting ASICs in
production.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fallback code for getting default backlight caps was using
the wrong variable name. Fix it.
Fixes: https://lists.freedesktop.org/archives/dri-devel/2018-November/197752.html
Signed-off-by: David Francis <David.Francis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Two non-blocking commits in succession can result in a sequence where
the same dc->current_state is queried for both commits.
1. 1st commit -> check -> commit -> swaps atomic state -> queues work
2. 2nd commit -> check -> commit -> swaps atomic state -> queues work
3. 1st commit work finishes
The issue with this sequence is that the same dc->current_state is
read in both atomic checks. If the first commit modifies streams or
planes those will be missing from the dc->current_state for the
second atomic check. This result in many stream and plane errors in
atomic commit tail.
[How]
The driver still needs to track old to new state to determine if the
commit in its current implementation. Updating the dc_state in
atomic tail is wrong since the dc_state swap should be happening as
part of drm_atomic_helper_swap_state *before* the worker queue kicks
its work off.
The simplest replacement for the subclassing (which doesn't properly
manage the old to new atomic state swap) is to use the drm private
object helpers. While some of the dc_state members could be merged
into dm_crtc_state or dm_plane_state and copied over that way it is
easier for now to just treat the whole dc_state structure as a single
private object.
This allows amdgpu_dm to drop the dc->current_state copy from within
atomic check. It's replaced by a copy from the current atomic state
which is propagated correctly for the sequence described above.
Since access to the dm_state private object is now locked this should
also fix issues that could arise if submitting non-blocking commits
from different threads.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver shouldn't try to access any GFX registers until RLC is idle.
During the test, it took 12 seconds for RLC to clear the BUSY bit
in RLC_GPM_STAT register which is un-acceptable for driver.
As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK
cycles to finish its critical section. In a lowest 300M enginer clock
setting(default from vbios), 50 us delay is enough.
This commit fix the hang when RLC introduce the work around for XGMI
which requires more cycles to setup more registers than normal
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't bounce back to the root level for fragment processing, because
huge pages are not supported at that level. This is unlikely to happen
with the default VM size on Vega, but can be exposed by limiting the
VM size with the amdgpu.vm_size module parameter.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid potential integer overflows with left shift in huge-page mapping
code by casting the operand to uin64_t first.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in the module description text and
a comment too, fix them. Also line break overly long comment.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove dce/dce_mem_input.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gca/gfx_8_0_enum.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove drm/drm_fb_helper.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ACPI ATIF has a function called query
backlight transfer characteristics. Among the
information returned by this function is
the minimum and maximum input signals for the
backlight
Call that function on ACPI init. When DM
backlight device is updated, copy over the
backlight caps into DM, but only once. Use
the backlight caps in the backlight-to-dc
calculation
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ACPI interface in AMD was a few years out of date
and contained some unused and deprecated functions
Remove functions: Select Active Displays, Get Lid State,
Get TV Standard, Set TV Standard, Get Panel Expansion Mode,
Set Panel Expansion Mode, Get Graphics Device Types
Add functions: Query Backlight Transfer Characteristics,
Ready To Undock Notification
Changed functions: Get System Parameters,
Get System BIOS Requests
All changes are right from the standard
ATI ACPI Control Methods V0.44
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adaptive Backlight Management (ABM) is a feature
that reduces backlight level to save power, while
increasing pixel contrast and pixel luminance
to maintain readability and image quality.
ABM will adjust in response to the
pixel luminance of the displayed content.
ABM is made available as a drm property on eDP
monitors called "abm level", which ranges from 0 to 4.
When this property is set to 0, ABM is off. Levels 1
to 4 represent different ranges of backlight reduction.
At higher levels both the backlight reduction and pixel
adjustment will be greater.
ABM requires DMCU firmware, which is currently available for
Raven ASICs only. If the feature does not work, please
ensure your firmware is up to date.
v2:
Fix commit message, only attach property if DMCU loaded
v3:
Store ABM level in crtc state to accommodate dc
v4:
Fix ABM saving on dpms cycle
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCU IRAM must be loaded by the driver before DMCU
can function.
Move the IRAM code out of the shadows and into a new file
modules/power/power_helpers.c
The IRAM table contains the backlight curve and ABM parameters
Add this new file to the Makefiles
Call dmcu_load_iram in late init of DM
Move struct dmcu_version from dc.h to dmcu.h to allow
dmcu to be included on its own
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c:49 amdgpu_allocate_static_csa()
error: uninitialized symbol 'ptr'.
the test if (!bo) doesn't work, as the bo is a pointer to a pointer.
if bo create failed, the *bo will be set to NULL.
so change to test *bo.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We observe black lines (underflow) on display when playing a
4K video with UVD. On Disabling Low memory P state this issue is
not seen.
In this patch ,disabling low memory P state only when video
size >= 4k.
Multiple runs of power measurement shows no impact
Signed-off-by: suresh guttula <suresh.guttula@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add hwmgr callback "update_nbdpm_pstate".This will use to access
"cz_nbdpm_pstate_enable_disable" function to enable/disable low
memory pstate.
Signed-off-by: suresh guttula <suresh.guttula@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit dbd8299c32f6f413f6cfe322fe0308f3cfc577e8.
Reason for revert:
This patch sends msg PPSMC_MSG_DisableLowMemoryPstate(0x002e)
in wrong of sequence to SMU which is before PPSMC_MSG_UVDPowerON (0x0008).
This leads to SMU failing to service the request as it is
dependent on UVD to be powered ON, since it accesses UVD
registers.
This msg should ideally be sent only when the UVD is about to decode
a 4k video.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: suresh guttula <suresh.guttula@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before:
We use drm_match_cea_mode() to get the vic for any mode we
want to set, most of the time vic will be different for the new mode.
DC uses memcmp to check if timing changed, in this case DC will
say timing changed and we endup doing a full modeset.
Current:
Now we check if !RMX_OFF and old_refresh == new_refresh if so
we copy the vic from old timing. In a case where we are currently on
a lower timing and want to change to higher mode, stream->dst will be
different and cause us to do a full modeset, which is what we want.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setting this allows for display scaling by default
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Path property is used for userspace to know what MST connector goes to what actual DRM DisplayPort connector, the tiling property is for tiling configurations. Not sure what else there is to figure out.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The change fixed huge delay in SST daisy chain and S3 soft hang
observed in 4.19 kernel rebase.
Regression point in drm:
drm/fb-helper: Eliminate the .best_encoder() usage
The aux sequence is altered due to the failure in
drm_connector_for_each_possible_encoder(). The failure is
caused by missing attached encoder in the process of adding
MST connector.
drm_dp_send_enum_path_resources() aux transaction is pushed after
mode probe, which causes conflict to drm_dp_mst_i2c_xfer(),
leading to the transaction timeout.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently there are several instances of pointer fs_params being
dereferenced before fs_params is being null checked. Fix this by
only dereferencing fs_params after the null check.
Detected by CoverityScan, CID#1475565 ("Dereference before null check")
Fixes: e1e8a020c6 ("drm/amd/display: Add support for Freesync 2 HDR and Content to Display Mapping")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove dm_services_types.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gca/gfx_8_0_sh_mask.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gca/gfx_8_0_d.h which is included more than once
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based SDMA fw version to enable has_page_queue support. Have to move
sdma_v4_0_init_microcode from sw_init to early_init, to load firmware
and init fw_version before set_ring/buffer/vm_pte_funcs use it.
v2: don't enable on vega12, 20 until confirmed
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to the register name and setting change of HDP
memory light sleep on Vega20,change accordingly in
the driver.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because increase SDMA_DOORBELL_RANGE to add new SDMA doorbell for paging queue will
break SRIOV, instead we can reserve and map two doorbell pages for amdgpu, paging
queues doorbell index use same index as SDMA gfx queues index but on second page.
For Vega20, after we change doorbell layout to increase SDMA doorbell for 8 SDMA RLC
queues later, we could use new doorbell index for paging queue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This looks like copy paste typo
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The static struct drm_driver *driver was
not used because drm_pci_init was deprecated
v2: Remove static pointer pdriver(Christian)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to improve system limit by:
1. replacing userptrlimit with a total memory limit that
conunts TTM memory usage and userptr usage.
2. counting acc size for all BOs.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change prepares for adding SG BOs that will be used for mapping
doorbells into GPUVM address space.
This type of BO would be mistaken for an invalid userptr BO. Improve
that check to test that it's actually a userptr BO so that SG BOs that
are still in the CPU domain can be validated and mapped correctly.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The adev parameter in amdgpu_sync_fence and amdgpu_sync_resv is only
needed for updating sync->last_vm_update. This breaks if different
adevs are passed to calls for the same sync object.
Always pass NULL for calls from KFD because sync objects used for
KFD don't belong to any particular device, and KFD doesn't need the
sync->last_vm_update fence.
This fixes kernel log warnings on multi-GPU systems after recent
changes in amdgpu_amdkfd_gpuvm_restore_process_bos.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of waiting for each KFD BO after validation just wait for the
last BO moving fence.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PD or PT might have to be moved during validation and this move has to be
completed before updating it. If page table updates are done using SDMA
then this serializing is done by SDMA command submission.
And if PD/PT updates are done by CPU, then explicit waiting for PD/PT
updates are done in amdgpu VM amdgpu_vm_wait_pd function.
Sync to PD BO moving fence to handle corner case where none of the PTs
are updated but PD is evicted.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gca/gfx_8_0_enum.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the define rather than hardcoded value.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a known gfx9 HW issue, and this change can perfectly workaround
the issue.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes debug message get printed even when there is early return.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Vega12 and Polaris12 device info and device IDs to KFD.
Signed-off-by: Gang Ba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will make reading code much easier. This fixes a few spots missed in a
previous commit with the same title.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reading the sysfs files pp_sclk_od and pp_mclk_od return the
percentage difference between the VBIOS-provided default
frequency and the current (possibly user-set) frequency in
the highest SCLK and MCLK DPM states, respectively.
Writing to these files provides an easy mechanism for
setting a higher-than-default maximum frequency. We
normally only allow values >= 0 to be written here.
However, with the addition of pp_od_clk_voltage, we now
allow users to set custom DPM tables. If they then set
the maximum DPM state to something less than the default,
later reads of pp_*_od should return a negative value.
The highest DPM state is now less than the VBIOS-provided
default, so the percentage is negative.
The math to calculate this was originally performed with
unsigned values, meaning reads that should return negative
values returned meaningless data. This patch corrects that
issue and normalizes how all of the calculations are done
across the various hwmgr types.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to lack of MODULE_FIRMWARE() with hainan_mc.bin, the driver
doesn't work properly in initrd. Let's add it.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1116239
Fixes: 8eaf2b1faa ("drm/amdgpu: switch firmware path for SI parts")
Cc: <stable@vger.kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
