When max_bytes is not 8 bytes aligned and bo size is larger than
max_bytes, the last 8 bytes in a ttm node may be left unchanged.
For example, on pre SDMA 4.0, max_bytes = 0x1fffff, and the bo size
is 0x200000, the problem will happen.
In order to fix the problem, we separately store the max nums of
PTEs/PDEs a single operation can set in amdgpu_vm_pte_funcs
structure, rather than inferring it from bytes limit of SDMA
constant fill, i.e. fill_max_bytes.
Together with the fix, we replace the hard code value "10" in
amdgpu_vm_bo_update_mapping() with the corresponding values from
structure amdgpu_vm_pte_funcs.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU reset will require all hw doing hw_init thus
ucode_init_bo will be invoked again, which lead to
memory leak
skip the fw_buf allocation during sriov gpu reset to avoid
memory leak.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
otherwise a gpu hang will make application couldn't be killed
under timedout=0 mode
v2:
Fix memoryleak job/job->s_fence issue
unlock mn
remove the ERROR msg after waiting being interrupted
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
currently in_reset is only used in sriov gpu reset, and it
will be used for other non-gfx hw component later, like
PSP, so move it from gfx to adev and rename to in_sriov_reset
make more sense.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix checkpatch.pl WARNING:
Prefer 'unsigned int' to bare use of 'unsigned'
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To filter out high-frequency interrupts that can be safely ignored.
v2: squash in trivial typo fix for si (Alex)
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just some cleanup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just some cleanup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is quite controversial because it adds another lock which is held during
page table updates, but I don't see much other option.
v2: allow multiple updates to be in flight at the same time
v3: simplify the patch, take the read side only once
v4: correctly fix rebase conflict
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we need to find the mapping we need sysvm access anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead take the callback lock during the final parts of CS.
This should solve the last remaining locking order problems with BO reservations.
v2: rebase, make dummy functions static inline
v3: add one more missing inline and comments
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of moving them in the MMU notifier move them during CS.
v2: still mark pages as accessed/dirty
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead use a counter to figure out if we need to set new pages or not.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move calling put_page into the unpopulate callback. Otherwise we mess up the pages
reference count when it is unbound multiple times.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the IOCTL interface so that applications can allocate per VM BOs.
Still WIP since not all corner cases are tested yet, but this reduces average
CS overhead for 10K BOs from 21ms down to 48us.
v2: add some extra checks, remove the WIP tag
v3: rename new flag to AMDGPU_GEM_CREATE_VM_ALWAYS_VALID
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need a larger gart for asics that do not support GPUVM on all
engines (e.g., MM) to make sure we have enough space for all
gtt buffers in physical mode. Change the default size based on
the asic type.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow overrides on the command line.
v2: agd: sqaush in spelling fix and bogus default value warning
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the CSA bo_va from the VM to the fpriv structure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like a better place for this.
v2: use atomic64_t members instead
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't make much sense to count those numbers twice.
v2: use and atomic64_t instead
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change "stollen" to "stolen"
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
May waste a bit of memory, but simplifies the interface
significantly.
v2: convert internal accounting to use 256bit slots
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already allocate this as part of the ring structure,
use that instead.
Cc: Frank Min <Frank.Min@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a lower case b to be consistent with the other wb functions.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move amdgpu_bo and related structures into amdgpu_object.h.
Move amdgpu_bo_list structures to the amdgpu_bo_list functions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't keep around the same pointer twice.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While doing flr on VFs, there is possibility to lost the doorbell
writing for sdma, so enable poll mem for sdma, then sdma fw would
check the pollmem holding wptr.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now uvd doorbell is from 0xf8-0xfb and vce doorbell is from 0xfc-0xff
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1, for sriov, we need 8dw for the gfx fence due to CP
behaviour
2, cleanup wrong logic in wptr/rptr wb alloc and free
Change-Id: Ifbfed17a4621dae57244942ffac7de1743de0294
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set a configurable SDMA phase quantum when enabling SDMA context
switching. The default value significantly reduces SDMA latency
in page table updates when user-mode SDMA queues have concurrent
activity, compared to the initial HW setting.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Andres Rodriguez <andres.rodriguez@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The BO move throttling code is designed to allow VRAM to fill quickly if it
is relatively empty. However, this does not take into account situations
where the visible VRAM is smaller than total VRAM, and total VRAM may not
be close to full but the visible VRAM segment is under pressure. In such
situations, visible VRAM would experience unrestricted swapping and
performance would drop.
Add a separate counter specifically for moves involving visible VRAM, and
check it before moving BOs there.
v2: Only perform calculations for separate counter if visible VRAM is
smaller than total VRAM. (Michel Dänzer)
v3: [Michel Dänzer]
* Use BO's location rather than the AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED
flag to determine whether to account a move for visible VRAM in most
cases.
* Use a single
if (adev->mc.visible_vram_size < adev->mc.real_vram_size) {
block in amdgpu_cs_get_threshold_for_moves.
Fixes: 95844d20ae (drm/amdgpu: throttle buffer migrations at CS using a fixed MBps limit (v2))
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow specifying a limit on visible VRAM via a module parameter. This is
helpful for testing performance under visible VRAM pressure.
v2: Add cast to 64-bit (Christian König)
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limit the default GART size and save a lot of VRAM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows setting the gtt size independent of the gart size.
v2: fix copy and paste typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename symbols from gtt_ to gart_ as appropriate.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change, just cleanup.
v2: rebased, keep gart name.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to write the mapped PTEs into
an IB instead of the table directly.
v2: fix build with debugfs enabled, remove unused assignment
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain MC registers need a delay after writing them to properly
update in the init sequence.
Signed-off-by: Ken Wang <Ken.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep them where they belong.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Stop spreading the code over all GMC generations.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are no longer needed now that we use the fb_location
programmed by the vbios.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function is called only once inside the .c file.
v2: update the commit message (Michel)
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics with 4 SEs are not able to fit the entire bitmask in the
original field, use an array instead.
v2: keep cu_ao_mask for backward compatibility.
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In original function amdgpu_bo_list_get, the waiting
for result->lock can be quite long while mutex
bo_list_lock was holding. It can make other tasks
waiting for bo_list_lock for long period.
Secondly, this patch allows several tasks(readers of idr)
to proceed at the same time.
v2: use rcu and kref (Dave Airlie and Christian König)
v3: update v1 commit message (Michel Dänzer)
v4: rebase on upstream (Alex Deucher)
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This creates a new command submission chunk for amdgpu
to add in and out sync objects around the submission.
Sync objects are managed via the drm syncobj ioctls.
The command submission interface is enhanced with two new
chunks, one for syncobj pre submission dependencies,
and one for post submission sync obj signalling,
and just takes a list of handles for each.
This is based on work originally done by David Zhou at AMD,
with input from Christian Konig on what things should look like.
In theory VkFences could be backed with sync objects and
just get passed into the cs as syncobj handles as well.
NOTE: this interface addition needs a version bump to expose
it to userspace.
TODO: update to dep_sync when rebasing onto amdgpu master.
(with this - r-b from Christian)
v1.1: keep file reference on import.
v2: move to using syncobjs
v2.1: change some APIs to just use p pointer.
v3: make more robust against CS failures, we now add the
wait sems but only remove them once the CS job has been
submitted.
v4: rewrite names of API and base on new syncobj code.
v5: move post deps earlier, rename some apis
v6: lookup post deps earlier, and just replace fences
in post deps stage (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New radeon and amdgpu features for 4.13:
- Lots of Vega10 bug fixes
- Preliminary Raven support
- KIQ support for compute rings
- MEC queue management rework from Andres
- Audio support for DCE6
- SR-IOV improvements
- Improved module parameters for controlling radeon vs amdgpu support
for SI and CIK
- Bug fixes
- General code cleanups
[airlied: dropped drmP.h header from one file was needed and build broke]
* 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux: (362 commits)
drm/amdgpu: Fix compiler warnings
drm/amdgpu: vm_update_ptes remove code duplication
drm/amd/amdgpu: Port VCN over to new SOC15 macros
drm/amd/amdgpu: Port PSP v10.0 over to new SOC15 macros
drm/amd/amdgpu: Port PSP v3.1 over to new SOC15 macros
drm/amd/amdgpu: Port NBIO v7.0 driver over to new SOC15 macros
drm/amd/amdgpu: Port NBIO v6.1 driver over to new SOC15 macros
drm/amd/amdgpu: Port UVD 7.0 over to new SOC15 macros
drm/amd/amdgpu: Port MMHUB over to new SOC15 macros
drm/amd/amdgpu: Cleanup gfxhub read-modify-write patterns
drm/amd/amdgpu: Port GFXHUB over to new SOC15 macros
drm/amd/amdgpu: Add offset variant to SOC15 macros
drm/amd/powerplay: add avfs control for Vega10
drm/amdgpu: add virtual display support for raven
drm/amdgpu/gfx9: fix compute ring doorbell index
drm/amd/amdgpu: Rename KIQ ring to avoid spaces
drm/amd/amdgpu: gfx9 tidy ups (v2)
drm/amdgpu: add contiguous flag in ucode bo create
drm/amdgpu: fix missed gpu info firmware when cache firmware during S3
drm/amdgpu: export test ib debugfs interface
...
gpu_info firmware is released after data is used. But when system enters into
suspend, upper class driver will cache all firmware names. At that time,
gpu_info will be failing to load. It seems an upper class issue, that we should
not release gpu_info firmware until device finished.
[ 903.236589] cache_firmware: amdgpu/vega10_sdma1.bin
[ 903.236590] fw_set_page_data: fw-amdgpu/vega10_sdma1.bin buf=ffff88041eee10c0 data=ffffc90002561000 size=17408
[ 903.236591] cache_firmware: amdgpu/vega10_sdma1.bin ret=0
[ 903.464160] __allocate_fw_buf: fw-amdgpu/vega10_gpu_info.bin buf=ffff88041eee2c00
[ 903.471815] (NULL device *): loading /lib/firmware/updates/4.11.0-custom/amdgpu/vega10_gpu_info.bin failed with error -2
[ 903.482870] (NULL device *): loading /lib/firmware/updates/amdgpu/vega10_gpu_info.bin failed with error -2
[ 903.492716] (NULL device *): loading /lib/firmware/4.11.0-custom/amdgpu/vega10_gpu_info.bin failed with error -2
[ 903.503156] (NULL device *): direct-loading amdgpu/vega10_gpu_info.bin
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
