Commit Graph

400564 Commits

Author SHA1 Message Date
Joe Perches
7b4371ea48 ath10k: wmi: Convert use of 6 to ETH_ALEN
Use the appropriate define instead of 6.

Signed-off-by: Joe Perches <joe@perches.com>
Noticed-by: Julia Lawall <julia.lawall@lip6.fr> via spatch script
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 23:41:53 -04:00
Joe Perches
d458cdf712 net:drivers/net: Miscellaneous conversions to ETH_ALEN
Convert the memset/memcpy uses of 6 to ETH_ALEN
where appropriate.

Also convert some struct definitions and u8 array
declarations of [6] to ETH_ALEN.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 17:04:45 -04:00
Denis Kirjanov
0b3d8e087b include/linux/skbuff.h: move CONFIG_XFRM check inside the skb_sec_path()
And thus we have only one function definition

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 16:50:40 -04:00
Eric Dumazet
6ae705323b tcp: sndbuf autotuning improvements
tcp_fixup_sndbuf() is underestimating initial send buffer requirements.

It was not noticed because big GSO packets were escaping the limitation,
but with smaller TSO packets (or TSO/GSO/SG off), application hits
sk_sndbuf before having a chance to fill enough packets in socket write
queue.

- initial cwnd can be bigger than 10 for specific routes

- SKB_TRUESIZE() is a bit under real needs in some cases,
  because of power-of-two rounding in kmalloc()

- Fast Recovery (RFC 5681 3.2) : Cubic needs 70% factor

- Extra cushion (application might react slowly to POLLOUT)

tcp_v4_conn_req_fastopen() needs to call tcp_init_metrics() before
calling tcp_init_buffer_space()

Then we realize tcp_new_space() should call tcp_fixup_sndbuf()
instead of duplicating this stuff.

Rename tcp_fixup_sndbuf() to tcp_sndbuf_expand() to be more
descriptive.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 16:45:17 -04:00
baker.zhang
bbe34cf8a1 fib_trie: avoid a redundant bit judgement in inflate
Because 'node' is the i'st child of 'oldnode',
thus, here 'i' equals
tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits)

we just get 1 more bit,
and need not care the detail value of this bits.

I apologize for the mistake.

I generated the patch on a branch version,
and did not notice the put_child has been changed.

I have redone the test on HEAD version with my patch.

two cases are used.
case 1. inflate a node which has a leaf child node.
case 2: inflate a node which has a an child node with skipped bits

test env:
  ip link set eth0 up
  ip a add dev eth0 192.168.11.1/32
here, we just focus on route table(MAIN),
so I use a "192.168.11.1/32" address to simplify the test case.

call trace:
+ fib_insert_node
+ + trie_rebalance
+ + + resize
+ + + + inflate

Test case 1:  inflate a node which has a leaf child node.

===========================================================
step 1. prepare a fib trie
------------------------------------------
  ip r a 192.168.0.0/24 via 192.168.11.1
  ip r a 192.168.1.0/24 via 192.168.11.1

we get a fib trie.
root@baker:~# cat /proc/net/fib_trie
Main:
  +-- 192.168.0.0/23 1 0 0
   |-- 192.168.0.0
    /24 universe UNICAST
   |-- 192.168.1.0
    /24 universe UNICAST
Local:
.....

step 2. Add the third route
------------------------------------------
root@baker:~# ip r a 192.168.2.0/24 via 192.168.11.1

A fib_trie leaf will be inserted in fib_insert_node before trie_rebalance.

For function 'inflate':
'inflate' is called with following trie.
  +-- 192.168.0.0/22 1 1 0 <=== tn node
    +-- 192.168.0.0/23 1 0 0    <== node a
        |-- 192.168.0.0
          /24 universe UNICAST
        |-- 192.168.1.0
          /24 universe UNICAST
      |-- 192.168.2.0          <== leaf(node b)

When process node b, which is a leaf. here:
i is 1,
node key "192.168.2.0"
oldnode is (pos:22, bits:1)

unpatch source:
tkey_extract_bits(node->key, oldtnode->pos + oldtnode->bits, 1)
it equals:
tkey_extract_bits("192.168,2,0", 22 + 1, 1)

thus got 0, and call put_child(tn, 2*i, node); <== 2*i=2.

patched source:
tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits + 1),
tkey_extract_bits("192.168,2,0", 22, 1 + 1)  <== get 2.

Test case 2:  inflate a node which has a an child node with skipped bits
==========================================================================
step 1. prepare a fib trie.
  ip link set eth0 up
  ip a add dev eth0 192.168.11.1/32
  ip r a 192.168.128.0/24 via 192.168.11.1
  ip r a 192.168.0.0/24  via 192.168.11.1
  ip r a 192.168.16.0/24   via 192.168.11.1
  ip r a 192.168.32.0/24  via 192.168.11.1
  ip r a 192.168.48.0/24  via 192.168.11.1
  ip r a 192.168.144.0/24   via 192.168.11.1
  ip r a 192.168.160.0/24   via 192.168.11.1
  ip r a 192.168.176.0/24   via 192.168.11.1

check:
root@baker:~# cat /proc/net/fib_trie
Main:
  +-- 192.168.0.0/16 1 0 0
     +-- 192.168.0.0/18 2 0 0
        |-- 192.168.0.0
           /24 universe UNICAST
        |-- 192.168.16.0
           /24 universe UNICAST
        |-- 192.168.32.0
           /24 universe UNICAST
        |-- 192.168.48.0
           /24 universe UNICAST
     +-- 192.168.128.0/18 2 0 0
        |-- 192.168.128.0
           /24 universe UNICAST
        |-- 192.168.144.0
           /24 universe UNICAST
        |-- 192.168.160.0
           /24 universe UNICAST
        |-- 192.168.176.0
           /24 universe UNICAST
Local:
  ...

step 2. add a route to trigger inflate.
  ip r a 192.168.96.0/24   via 192.168.11.1

This command will call serveral times inflate.
In the first time, the fib_trie is:
________________________
+-- 192.168.128.0/(16, 1) <== tn node
 +-- 192.168.0.0/(17, 1)  <== node a
  +-- 192.168.0.0/(18, 2)
   |-- 192.168.0.0
   |-- 192.168.16.0
   |-- 192.168.32.0
   |-- 192.168.48.0
  |-- 192.168.96.0
 +-- 192.168.128.0/(18, 2) <== node b.
  |-- 192.168.128.0
  |-- 192.168.144.0
  |-- 192.168.160.0
  |-- 192.168.176.0

NOTE: node b is a interal node with skipped bits.
here,
i:1,
node->key "192.168.128.0",
oldnode:(pos:16, bits:1)
so
tkey_extract_bits(node->key, oldtnode->pos + oldtnode->bits, 1)
it equals:
tkey_extract_bits("192.168,128,0", 16 + 1, 1) <=== 0

tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits, 1)
it equals:
tkey_extract_bits("192.168,128,0", 16, 1+1) <=== 2

2*i + 0 == 2, so the result is same.

Signed-off-by: baker.zhang <baker.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 16:37:15 -04:00
Jesper Juhl
84557783c5 isdn: eicon: free pointer after using it in log msg in divas_um_idi_delete_entity()
Not really a problem, but nice IMHO; the Coverity static analyzer
complains that we use the pointer 'e' after it has been freed, so move
the freeing below the final use, even if that use is just using the
value of the pointer and not actually dereferencing it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 16:00:59 -04:00
Wei Liu
99d3d587b2 xen-netfront: convert to GRO API
Anirban was seeing netfront received MTU size packets, which downgraded
throughput. The following patch makes netfront use GRO API which
improves throughput for that case.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Anirban Chakraborty <abchak@juniper.net>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Konrad Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 15:54:11 -04:00
Hauke Mehrtens
ee002b64ec tg3: use phylib when robo switch is in use
When a switch is connected as a PHY to the MAC driven by tg3, use
phylib and provide the phy address to tg3 from the sprom.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 15:40:57 -04:00
Hauke Mehrtens
4bcef89f0c ssb: provide phy address for Gigabit Ethernet driver
Add a function to provide the phy address which should be used to the
Gigabit Ethernet driver connected to ssb.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 15:40:57 -04:00
Hauke Mehrtens
ead2402cb4 tg3: add support a phy at an address different than 01
When phylib was in use tg3 only searched at address 01 on the mdio
bus and did not work with any other address. On the BCM4705 SoCs the
switch is connected as a PHY behind the MAC driven by tg3 and it is at
PHY address 30 in most cases. This is a preparation patch to allow
support for such switches.

phy_addr is set to TG3_PHY_MII_ADDR for all devices, which are using
phylib, so this should not change any behavior.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 15:40:57 -04:00
David S. Miller
4fbef95af4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/emulex/benet/be.h
	drivers/net/usb/qmi_wwan.c
	drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
	include/net/netfilter/nf_conntrack_synproxy.h
	include/net/secure_seq.h

The conflicts are of two varieties:

1) Conflicts with Joe Perches's 'extern' removal from header file
   function declarations.  Usually it's an argument signature change
   or a function being added/removed.  The resolutions are trivial.

2) Some overlapping changes in qmi_wwan.c and be.h, one commit adds
   a new value, another changes an existing value.  That sort of
   thing.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 17:06:14 -04:00
Linus Torvalds
c31eeaced2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking changes from David Miller:

 1) Multiply in netfilter IPVS can overflow when calculating destination
    weight.  From Simon Kirby.

 2) Use after free fixes in IPVS from Julian Anastasov.

 3) SFC driver bug fixes from Daniel Pieczko.

 4) Memory leak in pcan_usb_core failure paths, from Alexey Khoroshilov.

 5) Locking and encapsulation fixes to serial line CAN driver, from
    Andrew Naujoks.

 6) Duplex and VF handling fixes to bnx2x driver from Yaniv Rosner,
    Eilon Greenstein, and Ariel Elior.

 7) In lapb, if no other packets are outstanding, T1 timeouts actually
    stall things and no packet gets sent.  Fix from Josselin Costanzi.

 8) ICMP redirects should not make it to the socket error queues, from
    Duan Jiong.

 9) Fix bugs in skge DMA mapping error handling, from Nikulas Patocka.

10) Fix setting of VLAN priority field on via-rhine driver, from Roget
    Luethi.

11) Fix TX stalls and VLAN promisc programming in be2net driver from
    Ajit Khaparde.

12) Packet padding doesn't get handled correctly in new usbnet SG
    support code, from Ming Lei.

13) Fix races in netdevice teardown wrt.  network namespace closing.
    From Eric W.  Biederman.

14) Fix potential missed initialization of net_secret if not TCP
    connections are openned.  From Eric Dumazet.

15) Cinterion PLXX product ID in qmi_wwan driver is wrong, from
    Aleksander Morgado.

16) skb_cow_head() can change skb->data and thus packet header pointers,
    don't use stale ip_hdr reference in ip_tunnel code.

17) Backend state transition handling fixes in xen-netback, from Paul
    Durrant.

18) Packet offset for AH protocol is handled wrong in flow dissector,
    from Eric Dumazet.

19) Taking down an fq packet scheduler instance can leave stale packets
    in the queues, fix from Eric Dumazet.

20) Fix performance regressions introduced by TCP Small Queues.  From
    Eric Dumazet.

21) IPV6 GRE tunneling code calculates max_headroom incorrectly, from
    Hannes Frederic Sowa.

22) Multicast timer handlers in ipv4 and ipv6 can be the last and final
    reference to the ipv4/ipv6 specific network device state, so use the
    reference put that will check and release the object if the
    reference hits zero.  From Salam Noureddine.

23) Fix memory corruption in ip_tunnel driver, and use skb_push()
    instead of __skb_push() so that similar bugs are less hard to find.
    From Steffen Klassert.

24) Add forgotten hookup of rtnl_ops in SIT and ip6tnl drivers, from
    Nicolas Dichtel.

25) fq scheduler doesn't accurately rate limit in certain circumstances,
    from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
  pkt_sched: fq: rate limiting improvements
  ip6tnl: allow to use rtnl ops on fb tunnel
  sit: allow to use rtnl ops on fb tunnel
  ip_tunnel: Remove double unregister of the fallback device
  ip_tunnel_core: Change __skb_push back to skb_push
  ip_tunnel: Add fallback tunnels to the hash lists
  ip_tunnel: Fix a memory corruption in ip_tunnel_xmit
  qlcnic: Fix SR-IOV configuration
  ll_temac: Reset dma descriptors indexes on ndo_open
  skbuff: size of hole is wrong in a comment
  ipv6 mcast: use in6_dev_put in timer handlers instead of __in6_dev_put
  ipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_put
  ethernet: moxa: fix incorrect placement of __initdata tag
  ipv6: gre: correct calculation of max_headroom
  powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file
  Revert "powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file"
  bonding: Fix broken promiscuity reference counting issue
  tcp: TSQ can use a dynamic limit
  dm9601: fix IFF_ALLMULTI handling
  pkt_sched: fq: qdisc dismantle fixes
  ...
2013-10-01 12:58:48 -07:00
Linus Torvalds
0b936842c8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc fix from David Miller:
 "Just a single bug fix to a regression added during some strlcpy()
  conversions"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix buggy strlcpy() conversion in ldom_reboot().
2013-10-01 12:57:59 -07:00
Linus Torvalds
517bf8fc21 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lru leak fix from Al Viro:
 "The fix in "super: fix for destroy lrus" didn't - they need to be
  destroyed, all right, but that's the wrong place..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/super.c: fix lru_list leak for real
2013-10-01 10:28:11 -07:00
Linus Torvalds
77c4ad8e23 Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull two KVM fixes from Gleb Natapov.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: do not check bit 12 of EPT violation exit qualification when undefined
  ARM: kvm: rename cpu_reset to avoid name clash
2013-10-01 10:25:10 -07:00
Al Viro
c2d22ecd3c fs/super.c: fix lru_list leak for real
Freeing ->s_{inode,dentry}_lru in deactivate_locked_super() is wrong;
the right place is destroy_super().  As it is, we leak them if sget()
decides that new superblock it has allocated (and never shown to
anybody) isn't needed and should be freed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-01 13:11:21 -04:00
Eric Dumazet
0eab5eb7a3 pkt_sched: fq: rate limiting improvements
FQ rate limiting suffers from two problems, reported
by Steinar :

1) FQ enforces a delay when flow quantum is exhausted in order
to reduce cpu overhead. But if packets are small, current
delay computation is slightly wrong, and observed rates can
be too high.

Steinar had this problem because he disabled TSO and GSO,
and default FQ quantum is 2*1514.

(Of course, I wish recent TSO auto sizing changes will help
to not having to disable TSO in the first place)

2) maxrate was not used for forwarded flows (skbs not attached
to a socket)

Tested:

tc qdisc add dev eth0 root est 1sec 4sec fq maxrate 8Mbit
netperf -H lpq84 -l 1000 &
sleep 10 ; tc -s qdisc show dev eth0
qdisc fq 8003: root refcnt 32 limit 10000p flow_limit 100p buckets 1024
 quantum 3028 initial_quantum 15140 maxrate 8000Kbit
 Sent 16819357 bytes 11258 pkt (dropped 0, overlimits 0 requeues 0)
 rate 7831Kbit 653pps backlog 7570b 5p requeues 0
  44 flows (43 inactive, 1 throttled), next packet delay 2977352 ns
  0 gc, 0 highprio, 5545 throttled

lpq83:~# tcpdump -p -i eth0 host lpq84 -c 12
09:02:52.079484 IP lpq83 > lpq84: . 1389536928:1389538376(1448) ack 3808678021 win 457 <nop,nop,timestamp 961812 572609068>
09:02:52.079499 IP lpq83 > lpq84: . 1448:2896(1448) ack 1 win 457 <nop,nop,timestamp 961812 572609068>
09:02:52.079906 IP lpq84 > lpq83: . ack 2896 win 16384 <nop,nop,timestamp 572609080 961812>
09:02:52.082568 IP lpq83 > lpq84: . 2896:4344(1448) ack 1 win 457 <nop,nop,timestamp 961815 572609071>
09:02:52.082581 IP lpq83 > lpq84: . 4344:5792(1448) ack 1 win 457 <nop,nop,timestamp 961815 572609071>
09:02:52.083017 IP lpq84 > lpq83: . ack 5792 win 16384 <nop,nop,timestamp 572609083 961815>
09:02:52.085678 IP lpq83 > lpq84: . 5792:7240(1448) ack 1 win 457 <nop,nop,timestamp 961818 572609074>
09:02:52.085693 IP lpq83 > lpq84: . 7240:8688(1448) ack 1 win 457 <nop,nop,timestamp 961818 572609074>
09:02:52.086117 IP lpq84 > lpq83: . ack 8688 win 16384 <nop,nop,timestamp 572609086 961818>
09:02:52.088792 IP lpq83 > lpq84: . 8688:10136(1448) ack 1 win 457 <nop,nop,timestamp 961821 572609077>
09:02:52.088806 IP lpq83 > lpq84: . 10136:11584(1448) ack 1 win 457 <nop,nop,timestamp 961821 572609077>
09:02:52.089217 IP lpq84 > lpq83: . ack 11584 win 16384 <nop,nop,timestamp 572609090 961821>

Reported-by: Steinar H. Gunderson <sesse@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 13:00:38 -04:00
Nicolas Dichtel
bb8140947a ip6tnl: allow to use rtnl ops on fb tunnel
rtnl ops where introduced by c075b13098 ("ip6tnl: advertise tunnel param via
rtnl"), but I forget to assign rtnl ops to fb tunnels.

Now that it is done, we must remove the explicit call to
unregister_netdevice_queue(), because  the fallback tunnel is added to the queue
in ip6_tnl_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this
is valid since commit 0bd8762824 ("ip6tnl: add x-netns support")).

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:55:53 -04:00
Nicolas Dichtel
205983c437 sit: allow to use rtnl ops on fb tunnel
rtnl ops where introduced by ba3e3f50a0 ("sit: advertise tunnel param via
rtnl"), but I forget to assign rtnl ops to fb tunnels.

Now that it is done, we must remove the explicit call to
unregister_netdevice_queue(), because  the fallback tunnel is added to the queue
in sit_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this
is valid since commit 5e6700b3bf ("sit: add support of x-netns")).

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:55:53 -04:00
David S. Miller
5229432f15 Merge branch 'intel'
Jeff Kirsher says:

====================
This series contains updates to ixgbevf, ixgbe and igb.

Don provides 3 patches for ixgbevf where he cleans up a redundant
read mailbox failure check, adds a new function to wait for receive
queues to be disabled before disabling NAPI, and move the API
negotiation so that it occurs in the reset path.  This will allow
the PF to be informed of the API version earlier.

Jacob provides a ixgbevf and ixgbe patch.  His ixgbevf patch removes
the use of hw_dbg when the ixgbe_get_regs function is called in ethtool.
The ixgbe patch renames the LL_EXTENDED_STATS and some of the functions
required to implement busy polling in order to remove the marketing
"low latency" blurb which hides what the code actually does.

Leonardo provides a ixgbe patch to add support for DCB registers dump
using ethtool for 82599 and x540 ethernet controllers.

I (Jeff) provide a ixgbe patch to cleanup whitespace issues seen in a
code review.

Todd provides for igb to add support for i354 in the ethtool offline
tests.

Laura provides an igb patch to add the ethtool callbacks necessary to
configure the number of RSS queues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:50:14 -04:00
Laura Mihaela Vasilescu
907b783579 igb: Add ethtool support to configure number of channels
This patch adds the ethtool callbacks necessary to configure the
number of RSS queues.

The maximum number of queues is in accordance with the datasheets.

Signed-off-by: Laura Mihaela Vasilescu <laura.vasilescu@rosedu.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:49:49 -04:00
Fujinaka, Todd
a4e979a27d igb: Add ethtool offline tests for i354
Add the ethtool offline tests for i354 devices.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:49:49 -04:00
Jacob Keller
b4640030ec ixgbe: remove marketing names from busy poll code
This patch renames the LL_EXTENDED_STATS and some of the functions required to
implement busy polling in the ixgbe driver, in order to remove the marketing
"low latency" blurb which hides what the code actually does.

This furthers work which was requested by Linus Torvalds when the initial busy
poll code was included in the kernel. The code in the ixgbe driver itself was
never properly renamed to reflect the change to busy polling as the title.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:49:49 -04:00
Jeff Kirsher
b000748467 ixgbe: Cleanup the use of tabs and spaces
Cleans up the whitespace issues noticed during code review where
a mix of tabs and spaces were used for indentation.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:49:49 -04:00
Leonardo Potenza
51e409f106 ixgbe: ethtool DCB registers dump for 82599 and x540
Added support for DCB registers dump using ethtool -d option both for
82599 and x540 ethernet controllers

Signed-off-by: Leonardo Potenza <leonardo.potenza@intel.com>
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:49:49 -04:00
Don Skidmore
798e381a0c ixgbevf: move API neg to reset path
After this patch the API negotiation will occur in the reset path.  So now
the PF will be informed of the API version earlier.  This will also require
the mailbox lock to be initialize sooner as well.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:49:48 -04:00
Don Skidmore
858c3dda5e ixgbevf: add wait for Rx queue disable
New function was added to wait for Rx queues to be disabled before
disabling NAPI. This function also allows us to  modify
ixgbevf_rx_desc_queue_enable() to better match ixgbe.  I also cleaned up
some msleep calls to usleep_range while I was in this code anyway.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:49:48 -04:00
Don Skidmore
c7bb417dbb ixgbevf: cleanup redundant mailbox read failure check
Since we are already checking for read failure in check_link we don't need
to do it here. Instead just make sure the watchdog task gets scheduled, if
we are up, and it can be done there. This will better follow igbvf method
of handling a mailbox event and message timeout.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:49:48 -04:00
Jacob Keller
fa07f10d9d ixgbevf: do not print registers to dmesg in ixgbevf_get_regs
This patch removes the use of hw_dbg in ixgbevf when the ixgbe_get_regs function
is called from ethtool. This goes along side a patch to ethtool which enables
proper support for ixgbevf pretty-printing of registers.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:49:48 -04:00
Sathya Perla
bc617526db be2net: add a counter for pkts dropped in xmit path
In the xmit path, the driver may drop some pkts due to reasons such as
DMA mapping errors, out of memory conditions or to protect HW from
unrecoverable errors. Add a counter in TX-stats for such drops.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:45:52 -04:00
Sathya Perla
2632bafd74 be2net: fix adaptive interrupt coalescing
The current EQ delay calculation for AIC is based only on RX packet rate.
This fails to be effective when there's only TX and no RX.
This patch inclues:
- Calculating EQ-delay based on both RX and TX pps.
- Modifying EQ-delay of all EQs via one cmd, instead of issuing a separate
  cmd for each EQ.
- A new structure to store interrupt coalescing parameters, in a separate
  cache-line from the EQ-obj.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:45:52 -04:00
Vasundhara Volam
0599863d35 be2net: call ENABLE_VF cmd for Skyhawk-R too
This cmd needs to be sent to FW when enabling VFs (currently used only
for Lancer.) Also, avoid calling the cmd when driver loads and finds that
VFs are already enabled from a previous load.

Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:45:52 -04:00
Vasundhara Volam
30f3fe4549 be2net: Create single TXQ on BE3-R 1G ports
On BE3-R 1G ports (identified by port numbers 2 and 3) the FW cannot properly
support multiple TXQs. This also makes the number of RX and TX queues symmetric
as only a single RXQ is available on 1G ports.

Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:45:52 -04:00
Vasundhara Volam
81b0265531 be2net: pass if_id for v1 and V2 versions of TX_CREATE cmd
It is a required field for all TX_CREATE cmd versions > 0.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:45:51 -04:00
Vasundhara Volam
b905b5d4d9 be2net: Call be_vf_setup() even when VFs are enbaled from previous load
Re-define the sriov_want() macro to check for number of VFs that need
to be enabled in the current load of the driver or the number of VFs that
still remain enabled from the previous load (attached VFs cannot be disabled.)

Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:45:51 -04:00
David S. Miller
9cb1712468 Merge branch 'ip_tunnel'
ip_tunnel bug fixes from Steffen Klassert.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:42:28 -04:00
Steffen Klassert
cfe4a53692 ip_tunnel: Remove double unregister of the fallback device
When queueing the netdevices for removal, we queue the
fallback device twice in ip_tunnel_destroy(). The first
time when we queue all netdevices in the namespace and
then again explicitly. Fix this by removing the explicit
queueing of the fallback device.

Bug was introduced when network namespace support was added
with commit 6c742e714d ("ipip: add x-netns support").

Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:42:16 -04:00
Steffen Klassert
78a3694d44 ip_tunnel_core: Change __skb_push back to skb_push
Git commit 0e6fbc5b ("ip_tunnels: extend iptunnel_xmit()")
moved the IP header installation to iptunnel_xmit() and
changed skb_push() to __skb_push(). This makes possible
bugs hard to track down, so change it back to skb_push().

Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:42:16 -04:00
Steffen Klassert
6701328262 ip_tunnel: Add fallback tunnels to the hash lists
Currently we can not update the tunnel parameters of
the fallback tunnels because we don't find them in the
hash lists. Fix this by adding them on initialization.

Bug was introduced with commit c544193214
("GRE: Refactor GRE tunneling code.")

Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:42:16 -04:00
Steffen Klassert
3e08f4a72f ip_tunnel: Fix a memory corruption in ip_tunnel_xmit
We might extend the used aera of a skb beyond the total
headroom when we install the ipip header. Fix this by
calling skb_cow_head() unconditionally.

Bug was introduced with commit c544193214
("GRE: Refactor GRE tunneling code.")

Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:42:16 -04:00
David S. Miller
e024bdc051 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
The following patchset contains Netfilter/IPVS fixes for your net
tree, they are:

* Fix BUG_ON splat due to malformed TCP packets seen by synproxy, from
  Patrick McHardy.

* Fix possible weight overflow in lblc and lblcr schedulers due to
  32-bits arithmetics, from Simon Kirby.

* Fix possible memory access race in the lblc and lblcr schedulers,
  introduced when it was converted to use RCU, two patches from
  Julian Anastasov.

* Fix hard dependency on CPU 0 when reading per-cpu stats in the
  rate estimator, from Julian Anastasov.

* Fix race that may lead to object use after release, when invoking
  ipvsadm -C && ipvsadm -R, introduced when adding RCU, from Julian
  Anastasov.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:39:35 -04:00
Manish Chopra
1ed98ed55d qlcnic: Fix SR-IOV configuration
o Interface needs to be brought down and up while configuring SR-IOV.
  Protect interface up/down using rtnl_lock()/rtnl_unlock()

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:34:59 -04:00
Ricardo Ribalda
7167cf0e8c ll_temac: Reset dma descriptors indexes on ndo_open
The dma descriptors indexes are only initialized on the probe function.

If a packet is on the buffer when temac_stop is called, the dma
descriptors indexes can be left on a incorrect state where no other
package can be sent.

So an interface could be left in an usable state after ifdow/ifup.

This patch makes sure that the descriptors indexes are in a proper
status when the device is open.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:31:35 -04:00
Sachin Kamat
b85f75ea04 net: can: c_can_platform: Remove redundant of_match_ptr
The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: linux-can@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:30:25 -04:00
Sachin Kamat
2afc6dff69 net: ethernet: cpsw-phy-sel: Remove redundant of_match_ptr
The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:30:25 -04:00
Sachin Kamat
1e5c76d40f net: ethernet: cpsw: Remove redundant of_match_ptr
The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01 12:30:25 -04:00
Nicolas Dichtel
4590672357 skbuff: size of hole is wrong in a comment
Since commit c93bdd0e03 ("netvm: allow skb allocation to use PFMEMALLOC
reserves"), hole size is one bit less than what is written in the comment.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30 22:32:39 -07:00
David S. Miller
d9a71f97d5 Merge branch 'fixes-for-3.12' of git://gitorious.org/linux-can/linux-can
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30 22:31:05 -07:00
Salam Noureddine
9260d3e101 ipv6 mcast: use in6_dev_put in timer handlers instead of __in6_dev_put
It is possible for the timer handlers to run after the call to
ipv6_mc_down so use in6_dev_put instead of __in6_dev_put in the
handler function in order to do proper cleanup when the refcnt
reaches 0. Otherwise, the refcnt can reach zero without the
inet6_dev being destroyed and we end up leaking a reference to
the net_device and see messages like the following,

unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Tested on linux-3.4.43.

Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30 22:28:58 -07:00
Salam Noureddine
e2401654dd ipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_put
It is possible for the timer handlers to run after the call to
ip_mc_down so use in_dev_put instead of __in_dev_put in the handler
function in order to do proper cleanup when the refcnt reaches 0.
Otherwise, the refcnt can reach zero without the in_device being
destroyed and we end up leaking a reference to the net_device and
see messages like the following,

unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Tested on linux-3.4.43.

Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30 22:28:56 -07:00