kvm_timer_update_state() is called when changing the phys timer
configuration registers, either via vcpu reset, as a result of a trap
from the guest, or when userspace programs the registers.
phys_timer_emulate() is in turn called by kvm_timer_update_state() to
either cancel an existing software timer, or program a new software
timer, to emulate the behavior of a real phys timer, based on the change
in configuration registers.
Unfortunately, the interaction between these two functions left a small
race; if the conceptual emulated phys timer should actually fire, but
the soft timer hasn't executed its callback yet, we cancel the timer in
phys_timer_emulate without injecting an irq. This only happens if the
check in kvm_timer_update_state is called before the timer should fire,
which is relatively unlikely, but possible.
The solution is to update the state of the phys timer after calling
phys_timer_emulate, which will pick up the pending timer state and
update the interrupt value.
Note that this leaves the opportunity of raising the interrupt twice,
once in the just-programmed soft timer, and once in
kvm_timer_update_state. Since this always happens synchronously with
the VCPU execution, there is no harm in this, and the guest ever only
sees a single timer interrupt.
Cc: Stable <stable@vger.kernel.org> # 4.15+
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
It's possible for userspace to control n. Sanitize n when using it as an
array index, to inhibit the potential spectre-v1 write gadget.
Note that while it appears that n must be bound to the interval [0,3]
due to the way it is extracted from addr, we cannot guarantee that
compiler transformations (and/or future refactoring) will ensure this is
the case, and given this is a slow path it's better to always perform
the masking.
Found by smatch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
arm64's new use of KVMs get_events/set_events API calls isn't just
or RAS, it allows an SError that has been made pending by KVM as
part of its device emulation to be migrated.
Wire this up for 32bit too.
We only need to read/write the HCR_VA bit, and check that no esr has
been provided, as we don't yet support VDFSR.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The get/set events helpers to do some work to check reserved
and padding fields are zero. This is useful on 32bit too.
Move this code into virt/kvm/arm/arm.c, and give the arch
code some underscores.
This is temporarily hidden behind __KVM_HAVE_VCPU_EVENTS until
32bit is wired up.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For the arm64 RAS Extension, user space can inject a virtual-SError
with specified ESR. So user space needs to know whether KVM support
to inject such SError, this interface adds this query for this capability.
KVM will check whether system support RAS Extension, if supported, KVM
returns true to user space, otherwise returns false.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[expanded documentation wording]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For the migrating VMs, user space may need to know the exception
state. For example, in the machine A, KVM make an SError pending,
when migrate to B, KVM also needs to pend an SError.
This new IOCTL exports user-invisible states related to SError.
Together with appropriate user space changes, user space can get/set
the SError exception state to do migrate/snapshot/suspend.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[expanded documentation wording]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Update the documentation to reflect the ordering requirements of
restoring the GICD_IIDR register before any other registers and the
effects this has on restoring the interrupt groups for an emulated GICv2
instance.
Also remove some outdated limitations in the documentation while we're
at it.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Simply letting IGROUPR be writable from userspace would break
migration from old kernels to newer kernels, because old kernels
incorrectly report interrupt groups as group 1. This would not be a big
problem if userspace wrote GICD_IIDR as read from the kernel, because we
could detect the incompatibility and return an error to userspace.
Unfortunately, this is not the case with current userspace
implementations and simply letting IGROUPR be writable from userspace for
an emulated GICv2 silently breaks migration and causes the destination
VM to no longer run after migration.
We now encourage userspace to write the read and expected value of
GICD_IIDR as the first part of a GIC register restore, and if we observe
a write to GICD_IIDR we know that userspace has been updated and has had
a chance to cope with older kernels (VGICv2 IIDR.Revision == 0)
incorrectly reporting interrupts as group 1, and therefore we now allow
groups to be user writable.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Implement the required MMIO accessors for GICv2 and GICv3 for the
IGROUPR distributor and redistributor registers.
This can allow guests to change behavior compared to running on previous
versions of KVM, but only to align with the architecture and hardware
implementations.
This also allows userspace to configure the interrupts groups for GICv3.
We don't allow userspace to write the groups on GICv2 just yet, because
that would result in GICv2 guests not receiving interrupts after
migrating from an older kernel that exposes GICv2 interrupts as group 1.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
If userspace attempts to write a GICD_IIDR that does not match the
kernel version, return an error to userspace. The intention is to allow
implementation changes inside KVM while avoiding silently breaking
migration resulting in guests not running without any clear indication
of what went wrong.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Currently we do not allow any vgic mmio write operations to fail, which
makes sense from mmio traps from the guest. However, we should be able
to report failures to userspace, if userspace writes incompatible values
to read-only registers. Rework the internal interface to allow errors
to be returned on the write side for userspace writes.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Now when we have a group configuration on the struct IRQ, use this state
when populating the LR and signaling interrupts as either group 0 or
group 1 to the VM. Depending on the model of the emulated GIC, and the
guest's configuration of the VMCR, interrupts may be signaled as IRQs or
FIQs to the VM.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In preparation for proper group 0 and group 1 support in the vgic, we
add a field in the struct irq to store the group of all interrupts.
We initialize the group to group 0 when emulating GICv2 and to group 1
when emulating GICv3, just like we treat them today. LPIs are always
group 1. We also continue to ignore writes from the guest, preserving
existing functionality, for now.
Finally, we also add this field to the vgic debug logic to show the
group for all interrupts.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently don't support grouping in the emulated VGIC, which is a
known defect on KVM (not hurting any currently used guests as far as
we're aware). This is currently handled by treating all interrupts as
group 0 interrupts for an emulated GICv2 and always signaling interrupts
as group 0 to the virtual CPU interface.
However, when reading which group interrupts belongs to in the guest
from the emulated VGIC, the VGIC currently reports group 1 instead of
group 0, which is misleading. Fix this temporarily before introducing
full group support by changing the hander to _raz instead of _rao.
Fixes: fb848db396 "KVM: arm/arm64: vgic-new: Add GICv2 MMIO handling framework"
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
As we are about to tweak implementation aspects of the VGIC emulation,
while still preserving some level of backwards compatibility support,
add a field to keep track of the implementation revision field which is
reported to the VM and to userspace.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Instead of hardcoding the shifts and masks in the GICD_IIDR register
emulation, let's add the definition of these fields to the GIC header
files and use them.
This will make things more obvious when we're going to bump the revision
in the IIDR when we'll make guest-visible changes to the implementation.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When running on a non-VHE system, we initialize tpidr_el2 to
contain the per-CPU offset required to reach per-cpu variables.
Actually, we initialize it twice: the first time as part of the
EL2 initialization, by copying tpidr_el1 into its el2 counterpart,
and another time by calling into __kvm_set_tpidr_el2.
It turns out that the first part is wrong, as it includes the
distance between the kernel mapping and the linear mapping, while
EL2 only cares about the linear mapping. This was the last vestige
of the first per-cpu use of tpidr_el2 that came in with SDEI.
The only caller then was hyp_panic(), and its now using the
pc-relative get_host_ctxt() stuff, instead of kimage addresses
from the literal pool.
It is not a big deal, as we override it straight away, but it is
slightly confusing. In order to clear said confusion, let's
set this directly as part of the hyp-init code, and drop the
ad-hoc HYP helper.
Reviewed-by: James Morse <james.morse@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The vgic debugfs file only knows about SGI/PPI/SPI interrupts, and
completely ignores LPIs. Let's fix that.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In the quest to remove all stack VLA usage from the kernel[1], this
switches to using a maximum size and adds sanity checks. Additionally
cleans up some of the int-vs-u32 usage and adds additional bounds checking.
As it currently stands, this will always be 8 bytes until the ABI changes.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Kees Cook <keescook@chromium.org>
[maz: dropped WARN_ONs]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The vgic_init function can race with kvm_arch_vcpu_create() which does
not hold kvm_lock() and we therefore have no synchronization primitives
to ensure we're doing the right thing.
As the user is trying to initialize or run the VM while at the same time
creating more VCPUs, we just have to refuse to initialize the VGIC in
this case rather than silently failing with a broken VCPU.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Trapping blocking WFE is extremely beneficial in situations where
the system is oversubscribed, as it allows another thread to run
while being blocked. In a non-oversubscribed environment, this is
the complete opposite, and trapping WFE is just unnecessary overhead.
Let's only enable WFE trapping if the CPU has more than a single task
to run (that is, more than just the vcpu thread).
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There is no need to perform cache maintenance operations when
creating the HYP page tables if we have the multiprocessing
extensions. ARMv7 mandates them with the virtualization support,
and ARMv8 just mandates them unconditionally.
Let's remove these operations.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The {pmd,pud,pgd}_populate accessors usage have always been a bit weird
in KVM. We don't have a struct mm to pass (and neither does the kernel
most of the time, but still...), and the 32bit code has all kind of
cache maintenance that doesn't make sense on ARMv7+ when MP extensions
are mandatory (which is the case when the VEs are present).
Let's bite the bullet and provide our own implementations. The only bit
of architectural code left has to do with building the table entry
itself (arm64 having up to 52bit PA, arm lacking PUD level).
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The arm and arm64 KVM page tables accessors are pointlessly different
between the two architectures, and likely both wrong one way or another:
arm64 lacks a dsb(), and arm doesn't use WRITE_ONCE.
Let's unify them.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On systems where CTR_EL0.DIC is set, we don't need to perform
icache invalidation to guarantee that we'll fetch the right
instruction stream.
This also means that taking a permission fault to invalidate the
icache is an unnecessary overhead.
On such systems, we can safely leave the page as being executable.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Set/Way handling is one of the ugliest corners of KVM. We shouldn't
have to handle that, but better safe than sorry.
Thankfully, FWB fixes this for us by not requiering any maintenance
(the guest is forced to use cacheable memory, no matter what it says,
and the whole system is garanteed to be cache coherent), which means
we don't have to emulate S/W CMOs, and don't have to track VM ops either.
We still have to trap S/W though, if only to prevent the guest from
doing something bad.
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Up to ARMv8.3, the combinaison of Stage-1 and Stage-2 attributes
results in the strongest attribute of the two stages. This means
that the hypervisor has to perform quite a lot of cache maintenance
just in case the guest has some non-cacheable mappings around.
ARMv8.4 solves this problem by offering a different mode (FWB) where
Stage-2 has total control over the memory attribute (this is limited
to systems where both I/O and instruction fetches are coherent with
the dcache). This is achieved by having a different set of memory
attributes in the page tables, and a new bit set in HCR_EL2.
On such a system, we can then safely sidestep any form of dcache
management.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
A small collection of fixes, sort of the usual at this point, all for
i.MX or OMAP:
- Enable ULPI drivers on i.MX to avoid a hang
- Pinctrl fix for touchscreen on i.MX51 ZII RDU1
- Fixes for ethernet clock references on am3517
- mmc0 write protect detection fix for am335x
- kzalloc->kcalloc conversion in an OMAP driver
- USB metastability fix for USB on dra7
- Fix touchscreen wakeup on am437x
-----BEGIN PGP SIGNATURE-----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=N/ik
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A small collection of fixes, sort of the usual at this point, all for
i.MX or OMAP:
- Enable ULPI drivers on i.MX to avoid a hang
- Pinctrl fix for touchscreen on i.MX51 ZII RDU1
- Fixes for ethernet clock references on am3517
- mmc0 write protect detection fix for am335x
- kzalloc->kcalloc conversion in an OMAP driver
- USB metastability fix for USB on dra7
- Fix touchscreen wakeup on am437x"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: imx_v4_v5_defconfig: Select ULPI support
ARM: imx_v6_v7_defconfig: Select ULPI support
ARM: dts: omap3: Fix am3517 mdio and emac clock references
ARM: dts: am335x-bone-common: Fix mmc0 Write Protect
bus: ti-sysc: Use 2-factor allocator arguments
ARM: dts: dra7: Disable metastability workaround for USB2
ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl
ARM: dts: am437x: make edt-ft5x06 a wakeup source
Pull x86/pti updates from Thomas Gleixner:
"Two small fixes correcting the handling of SSB mitigations on AMD
processors"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix the AMD SSBD usage of the SPEC_CTRL MSR
x86/bugs: Update when to check for the LS_CFG SSBD mitigation
Pull x86 fixes from Thomas Gleixner:
- Prevent an out-of-bounds access in mtrr_write()
- Break a circular dependency in the new hyperv IPI acceleration code
- Address the build breakage related to inline functions by enforcing
gnu_inline and explicitly bringing native_save_fl() out of line,
which also adds a set of _ARM_ARG macros which provide 32/64bit
safety.
- Initialize the shadow CR4 per cpu variable before using it.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Don't copy out-of-bounds data in mtrr_write
x86/hyper-v: Fix the circular dependency in IPI enlightenment
x86/paravirt: Make native_save_fl() extern inline
x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h>
compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations
x86/mm/32: Initialize the CR4 shadow before __flush_tlb_all()
Pull scheduler fixes from Thomas Gleixner:
- The hopefully final fix for the reported race problems in
kthread_parkme(). The previous attempt still left a hole and was
partially wrong.
- Plug a race in the remote tick mechanism which triggers a warning
about updates not being done correctly. That's a false positive if
the race condition is hit as the remote CPU is idle. Plug it by
checking the condition again when holding run queue lock.
- Fix a bug in the utilization estimation of a run queue which causes
the estimation to be 0 when a run queue is throttled.
- Advance the global expiration of the period timer when the timer is
restarted after a idle period. Otherwise the expiry time is stale and
the timer fires prematurely.
- Cure the drift between the bandwidth timer and the runqueue
accounting, which leads to bogus throttling of runqueues
- Place the call to cpufreq_update_util() correctly so the function
will observe the correct number of running RT tasks and not a stale
one.
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kthread, sched/core: Fix kthread_parkme() (again...)
sched/util_est: Fix util_est_dequeue() for throttled cfs_rq
sched/fair: Advance global expiration when period timer is restarted
sched/fair: Fix bandwidth timer clock drift condition
sched/rt: Fix call to cpufreq_update_util()
sched/nohz: Skip remote tick on idle task entirely
Pull objtool fix from Thomas Gleixner:
"A single fix for objtool to address a bug in handling the cold
subfunction detection for aliased functions which was added recently.
The bug causes objtool to enter an infinite loop"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Support GCC 8 '-fnoreorder-functions'
Pull crypto fixes from Herbert Xu:
- add missing RETs in x86 aegis/morus
- fix build error in arm speck
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86 - Add missing RETs
crypto: arm/speck - fix building in Thumb2 mode
maliciously crafted file system image can result in a kernel OOPS or
hang. At least one fix addresses an inline data bug could be
triggered by userspace without the need of a crafted file system
(although it does require that the inline data feature be enabled).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAltBmcYACgkQ8vlZVpUN
gaPDJgf/cEa9QuiYTbNOmcOMorK9LEk5XO8qsiJdUVNQtLsHZfl0QowbkF9/F/W5
andTJzNpFvXeLADMTTjpsDnQ90i8LKD11Kol3dPJcMhJhELtQsjxUBguxpQBP86R
dvHuCl2/AaqX7rr6Co80yYSinRCquqkzJNhdM5/MLNGziSpkQL3dPSs93rmV+YbU
8DkUwmhDhoiToLBTLaldrAsAzKvor3uyjNPJ3qhxeE2kXrnuI1V4XfstBGjhVKFB
/5aYWexDZkL5qiCo+lZnqdITqUnPx3uAkUdBn0dj7V+nDow+/R/8nApvlvJu6usF
OfMoKr098/pmPAjE5aZ8QpBNVtLFpg==
=njzR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes for ext4; most of which relate to vulnerabilities where a
maliciously crafted file system image can result in a kernel OOPS or
hang.
At least one fix addresses an inline data bug could be triggered by
userspace without the need of a crafted file system (although it does
require that the inline data feature be enabled)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: check superblock mapped prior to committing
ext4: add more mount time checks of the superblock
ext4: add more inode number paranoia checks
ext4: avoid running out of journal credits when appending to an inline file
jbd2: don't mark block as modified if the handle is out of credits
ext4: never move the system.data xattr out of the inode body
ext4: clear i_data in ext4_inode_info when removing inline data
ext4: include the illegal physical block in the bad map ext4_error msg
ext4: verify the depth of extent tree in ext4_find_extent()
ext4: only look at the bg_flags field if it is valid
ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
ext4: always check block group bounds in ext4_init_block_bitmap()
ext4: always verify the magic number in xattr blocks
ext4: add corruption check in ext4_xattr_set_entry()
ext4: add warn_on_error mount option
-----BEGIN PGP SIGNATURE-----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=IOF/
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix a use-after-free in the endpoint code (Dan Carpenter)
- Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven)
- Fix an nfp regression caused by a change in how we limit the number
of VFs we can enable (Jakub Kicinski)
- Fix failure path cleanup issues in the new R-Car gen3 PHY support
(Marek Vasut)
- Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc
Guire)
* tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
nfp: stop limiting VFs to 0
PCI/IOV: Reset total_VFs limit after detaching PF driver
PCI: faraday: Add missing of_node_put()
PCI: xilinx-nwl: Add missing of_node_put()
PCI: xilinx: Add missing of_node_put()
PCI: endpoint: Use after free in pci_epf_unregister_driver()
PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
PCI: rcar: Clean up PHY init on failure
PCI: rcar: Shut the PHY down in failpath
-----BEGIN PGP SIGNATURE-----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=x5ij
-----END PGP SIGNATURE-----
Merge tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Five smb3/cifs fixes for stable (including for some leaks and memory
overwrites) and also a few fixes for recent regressions in packet
signing.
Additional testing at the recent SMB3 test event, and some good work
by Paulo and others spotted the issues fixed here. In addition to my
xfstest runs on these, Aurelien and Stefano did additional test runs
to verify this set"
* tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf()
cifs: Fix infinite loop when using hard mount option
cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting
cifs: Fix memory leak in smb2_set_ea()
cifs: fix SMB1 breakage
cifs: Fix validation of signed data in smb2
cifs: Fix validation of signed data in smb3+
cifs: Fix use after free of a mid_q_entry
- Driver fixes for k3dma (off by one), pl330 (burst residue granularity)
and omap-dma (incorrect residue_granularity)
- Sinan's email update
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJbQK31AAoJEHwUBw8lI4NHdHgQAKPIWGpcochq1D05xXYTtFeW
8OZ5KxJKj1/fEKbdDVGSvptGRfIOKH//xeb1nFn1vCJh/B/3v25hF9x47m+Dds/l
nckkzKzn88Q4M5sbiQI+Rzgr4QRnPEjai55GsC90u7U6HmRSUBAnBELc8+gE7z/r
6XAuUYpnJ6JLjcF9CX8UnG8PzE3Hw4Z94b2t5gaHi0tZnQTwMQ91pH7EGVRwga4+
M+Cmds7Tvi8w1RTOS3OfD+E7H3PqKx3rZA6w3SK4NZqCSp4zA+jySVKi28QDIxHD
kIX4i5eZwiClEVAxBNN40Md8sh6BRz5HkOKJy3WL2o1vSLCZJwm9DfJwo1EzKKI/
FOyIF+clPctNXHwuSnpBes4X3zjPBVcl04Ii3oX1qdrWMT5XyyD8F/Y4NrT3rixQ
CqqsF7WJHNPUI+ZE+Jxwns5NXWQunpLoaY2cyt2f6DfXZsEtizlUcYhaO1J1SuQn
UnG/L94l8wX8oemlNYhBf/LvHNlOKzfKqtYVEEHy3c14ONZpeCLc/+TSKaoBWRke
NJ57Pjecde5w2Z56ZhG/oFwRilXraG62O1JkJTAFeDDLXx1UCl5nOCkCQqGxdMWM
mDxLVUKzIjJ8DbWJcq3DlLDWVMt2Dbqy7LA7/AagHBnIS1uuv9mXiUQT7CiVDzzG
8Ekz5Jas6etHn3++K5Mt
=pPiU
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"We have few odd driver fixes and one email update change for you this
time:
- Driver fixes for k3dma (off by one), pl330 (burst residue
granularity) and omap-dma (incorrect residue_granularity)
- Sinan's email update"
* tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()
dmaengine: pl330: report BURST residue granularity
MAINTAINERS: Update email-id of Sinan Kaya
dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
an interrupt issue, and one oops fix if init fails in a certain
way on the client driver.
-corey
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lLfC
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"A couple of small fixes: one to the BMC side of things that fixes an
interrupt issue, and one oops fix if init fails in a certain way on
the client driver"
* tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc: fix IRQ exception if the channel is not open
ipmi: Cleanup oops on initialization failure
Don't access the provided buffer out of bounds - this can cause a kernel
out-of-bounds read when invoked through sys_splice() or other things that
use kernel_write()/__kernel_write().
Fixes: 7f8ec5a4f0 ("x86/mtrr: Convert to use strncpy_from_user() helper")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180706215003.156702-1-jannh@google.com
This is two minor bug fixes (aacraid, target) and a fix for a
potential exploit in the way sg handles teardown.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWz/hBSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUkIAP9JKGYO
rcoNxusKsTi6tMEeUFzX1Mu0IkUr9ApcsCJMyAEAyRL5+b77PoZG8NgQBBo99iFE
8DMbxsNbBMbTzDqbfzk=
=ttS3
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is two minor bug fixes (aacraid, target) and a fix for a
potential exploit in the way sg handles teardown"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: mitigate read/write abuse
scsi: aacraid: Fix PD performance regression over incorrect qd being set
scsi: target: Fix truncated PR-in ReadKeys response
- Build cleanup/fix for the sunxi makefile that tried to save size
but failed and prevented dead code elimination from working
- Two Davinci clk driver fixes for a typo causing build failures
in different configurations and an error check that checks
the wrong variable.
- Undo the DT ABI breaking imx6ul binding header shuffle that got
merged this cycle.
-----BEGIN PGP SIGNATURE-----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=pNsb
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"The usual collection of driver fixlets:
- build cleanup/fix for the sunxi makefile that tried to save size
but failed and prevented dead code elimination from working
- two Davinci clk driver fixes for a typo causing build failures in
different configurations and an error check that checks the wrong
variable.
- undo the DT ABI breaking imx6ul binding header shuffle that got
merged this cycle"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
dt-bindings: clock: imx6ul: Do not change the clock definition order
clk: davinci: fix a typo (which leads to build failures)
clk: davinci: cfgchip: testing the wrong variable
clk: sunxi-ng: replace lib-y with obj-y
Pull s390 fixes from Martin Schwidefsky:
"A few more changes for v4.18:
- wire up the two new system calls io_pgetevents and rseq
- fix a register corruption in the expolines code for machines
without EXRL
- drastically reduce the memory utilization of the dasd driver
- fix reference counting for KVM page table pages"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up rseq system call
s390: wire up io_pgetevents system call
s390/mm: fix refcount usage for 4K pgste
s390/dasd: reduce the default queue depth and nr of hardware queues
s390: Correct register corruption in critical section cleanup
-----BEGIN PGP SIGNATURE-----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=v25Z
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the drm fixes for rc4.
It's a bit larger than I'd like but the exynos cleanups are pretty
mechanical, and I'd rather have them in sooner rather than later so we
can avoid too much conflicts around them. The non-mechanincal exynos
changes are mostly fixes for new feature recently introduced.
Apart from the exynos updates, we have:
i915:
- GVT and GGTT mapping fixes
amdgpu:
- fix HDMI2.0 4K@60 Hz regression
- Hotplug fixes for dual-GPU laptops to make power management better
- misc vega12 bios fixes, a race fix and some typos.
sii8620 bridge:
- small fixes around mode setting
core:
- use kvzalloc to allocate blob property memory"
* tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/amd/display: add a check for display depth validity
drm/amd/display: adding ycbcr420 pixel encoding for hdmi
drm/udl: fix display corruption of the last line
drm/bridge/sii8620: Fix link mode selection
drm/bridge/sii8620: Fix display of packed pixel modes
drm/bridge/sii8620: Send AVI infoframe in all MHL versions
drm/amdgpu: fix user fence write race condition
drm/i915: Try GGTT mmapping whole object as partial
drm/amdgpu/pm: fix display count in non-DC path
drm/amdgpu: fix swapped emit_ib_size in vce3
drm: Use kvzalloc for allocating blob property memory
drm/i915/gvt: changed DDI mode emulation type
drm/i915/gvt: fix a bug of partially write ggtt enties
drm/exynos: Replace drm_dev_unref with drm_dev_put
drm/exynos: Replace drm_gem_object_unreference_unlocked with put function
drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functions
drm/exynos: ipp: use correct enum type
drm/exynos: decon5433: Fix WINCONx reset value
drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes
drm/exynos: fimc: Use real buffer width for configuring the hardware
...
in the noise. These are minor bug fixes and clean ups. Those include:
- Avoiding a string overflow
- Code that didn't match the comment (but should)
- A small code optimization (use of a conditional)
- Quieting printf warnings
- Nuking unused code
- Fixing function graph interrupt annotation
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWz7ARhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmMqAQDTS7uvFLRR603WXyOazX6Y7FeiYFWp
MUUZjnbG9u0bawEAulW53AM0OL3EAAaZKtPi8VtsT+uktR1GIynXrp+yoww=
=yQDv
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes and cleanups from Steven Rostedt:
"While cleaning out my INBOX, I found a few patches that were lost in
the noise. These are minor bug fixes and clean ups. Those include:
- avoid a string overflow
- code that didn't match the comment (but should)
- a small code optimization (use of a conditional)
- quiet printf warnings
- nuke unused code
- fix function graph interrupt annotation"
* tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix missing return symbol in function_graph output
ftrace: Nuke clear_ftrace_function
tracing: Use __printf markup to silence compiler
tracing: Optimize trace_buffer_iter() logic
tracing: Make create_filter() code match the comments
tracing: Avoid string overflow
