With VDR streaming HDTV into network, generating an interrupt once per 16kb,
implemented in this patch, seems to support more robust throughput with HDTV.
Fix leaking almost 64kb data from the previous TS after changing the TS.
One effect of the old version was, that the DMA transfer and driver's
DMA buffer access might happen at the same time - a race condition.
Signed-off-by: Marko M. Ristola <marko.ristola@kolumbus.fi>
Reviewed-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
I noticed a stray 0x00 at init on DiSEqC bus (KNC1 DVB-S2) with a DiSEqC
tool analyzer.
I removed the register from initialization table and all seem to go well
(at least for my KNC board).
Signed-off-by: Florent Audebert <florent.audebert@anevia.com>
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch closes the race on the device and extension lists at USB disconnect
time. Previously, the device was removed from the device list during
em28xx_release_resources(), and then passed to the em28xx_close_extension()
function so that all extensions could run their fini() operations. However, this
left a (brief, theoretical, highly unlikely ;-)) window between these two calls
during which a new module could call em28xx_register_extension(). The result
would have been that the em28xx_usb_disconnect() function would also have passed
the device to the new extension's fini() function, despite never having called
the extension's init() function.
This patch also restores em28xx_close_extension()'s symmetry with
em28xx_init_extension(), and establishes the property that every device in the
device list must have been initialised for every extension in the extension list.
Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
(Resending because Mauro reported losing some emails on IRC)
Provide CX2388[578] IR receive timeout (RTO) reports in the
final space raw event sent up the chain to the raw IR pulse
decoders. This should allow the lirc decoder to actually
measure the inter-transmission gap properly.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is no need to put the IRQ number in driver's private platform
data structure as this can also be passed in struct i2c_lient.irq.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Switch to generic media bus signal polarity flags and allow
configuring the FIELD signal polarity.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
FIELD signal is used for indicating frame field type to the frame grabber
in interlaced scan mode, as specified in ITU-R BT.601 standard.
In normal operation mode FIELD = 0 selects Field1 (odd) and FIELD = 1
selects Field2 (even). When the FIELD signal is inverted it's the other
way around.
Add corresponding flags for configuring the FIELD signal polarity,
V4L2_MBUS_FIELD_EVEN_HIGH for the standard (non-inverted) case and
V4L2_MBUS_FIELD_EVEN_LOW for inverted case.
Also add a comment about usage of V4L2_MBUS_[HV]SYNC* flags for
the hardware that uses [HV]REF signals.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch converts some ifdef'd wrapper functions from macros to static inline
functions to kill the following warnings issued by GCC:
CC [M] drivers/media/rc/ir-raw.o
drivers/media/rc/ir-raw.c: In function ‘init_decoders’:
drivers/media/rc/ir-raw.c:353:2: warning: statement with no effect [-Wunused-value]
drivers/media/rc/ir-raw.c:354:2: warning: statement with no effect [-Wunused-value]
drivers/media/rc/ir-raw.c:355:2: warning: statement with no effect [-Wunused-value]
drivers/media/rc/ir-raw.c:356:2: warning: statement with no effect [-Wunused-value]
drivers/media/rc/ir-raw.c:357:2: warning: statement with no effect [-Wunused-value]
drivers/media/rc/ir-raw.c:359:2: warning: statement with no effect [-Wunused-value]
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: <linux-media@vger.kernel.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As the choice of the alternate setting has been enhanced in the gspca main,
forcing its number here is no more useful.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The JPEG quality was guessed as around 82%. Information in ms-win drivers
says it should be 85%.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some webcams ask for a greater time to start.
This patch increases the delay before timeout error on capture start.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver is based on Anders Blomdell's source proposed in april 2009.
It has been extended to handle the tp6810 bridge and the soi763a sensor.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch is adapted from a patch from Sarah Sharp (2010/05/03).
The xHCD handler checks the USB bandwidth on usb_set_interface()
instead of on usb_submit_urb().
Now, the same treatment is applied in case of error of both functions.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Previously image transfer used to use the highest altsetting, which, most of
the time, took the whole USB bandwidth.
Now, the altsetting is chosen according to an estimation of the bandwidth
needed for image transfer.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The sd_isoc_init() did only a set interface which is done in gspca main.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Correct tuner settings for more accuracy. This now makes the tuner
section more compatible with other versions of the IT913X
series.
TODOs
Version 2 chip
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add remote support for KWORLD UB499-2T-T09
The remote supplied is the same as KWORLD_315U.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This is an improved version of the patch I sent a little ago.
The problem was:
On my DC-1125 webcam chip from Syntek, whenever the webcam turns
on, the LED light on it is turned on also and never turns off again unless
system is shut downed or restarted.
The previous version seemed to break some other laptop webcam work. Thanks
to Andrea Anacleto for the bug report and solution.
Signed-off-by: Andrea Anacleto <andreaanacleto@libero.it>
Signed-off-by: Arvydas Sidorenko <asido4@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ioctls on the subdevs node currently don't dispatch the register access debug
driver callbacks. Add the dispatching with the same security checks are for
non subdev video nodes (i.e. only capable(CAP_SYS_ADMIN may call the register
access ioctls).
Signed-off-by: Martin Hostettler <martin@neutronstar.dyndns.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
remove VPBE_DISPLAY_SD_BUF_SIZE as it is no longer used.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The uvcvideo extension unit API requires constants defined in the
video.h header. Add it to the list of includes exported to userspace.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The UVC driver uses usb_alloc_coherent() to allocate DMA data buffers.
On systems without coherent DMA this ends up allocating buffers in
uncached memory. The subsequent memcpy's done to coalesce the DMA
chunks into contiguous buffers then run VERY slowly. On a MIPS test
system the memcpy is about 200 times slower. This issue prevents the
system from keeping up with 720p YUYV data at 10fps.
The following patch uses kmalloc to alloc the DMA buffers instead of
usb_alloc_coherent on systems without coherent DMA. With this patch
the system was easily able to keep up with 720p at 10fps.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The UVCIOC_CTRL_ADD, UVCIOC_CTRL_MAP_OLD, UVCIOC_CTRL_GET and
UVCIOC_CTRL_SET ioctls are deprecated and were scheduled for removal for
v2.6.42. As v2.6.42 == v3.2, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The Imaging Source CCD cameras use a vendor specific interface class
even though they are actually UVC compliant.
Signed-off-by: Arne Caspari <arne@unicap-imaging.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[mchehab@redhat.com: Fix a merge conflict]
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The protocol differs by having two toggle bits in the scancode. Since
one of the bits is otherwise unused, we can safely handle the bits
unconditionally.
[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The ati_remote_dump() function tries to not print "Weird byte" warning
for 1-byte responses that contain 0xff or 0x00, but it doesn't work
properly as it simply falls back to the "Weird data" warning in the else
clause.
Fix that by adding an inner if clause.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The keycode mangling algorithm is kept the same, so the new external
keymap has the same values as the old static table.
[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The driver will be migrated to the RC driver API in a following
commit.
[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The type of a media entity is default for this driver. This patch makes it
explicitly defined as MEDIA_ENT_T_V4L2_SUBDEV_FLASH.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Register values changed according to the data sheet and Texas Instruments DaVinci_PSP_03_02_00_37.
- TVP7002_RGB_COARSE_CLAMP_CTL changed to the default value in data sheet.
- TVP7002_HPLL_PHASE_SEL deleted because the registers write to reserved bits. The default value works fine.
Signed-off-by: Mats Randgaard <mats.randgaard@tandberg.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The FEC fix patch fixed locking on 11,681 Ghz, but not on 12,692 Ghz for
me.
Reviewed-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
