mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-07 05:16:40 +07:00
7802fb5256
49803 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
4217fdde34 |
KVM fixes for v4.12-rc2
ARM: - A fix for a build failure introduced in -rc1 when tracepoints are enabled on 32-bit ARM. - Disabling use of stack pointer protection in the hyp code which can cause panics. - A handful of VGIC fixes. - A fix to the init of the redistributors on GICv3 systems that prevented boot with kvmtool on GICv3 systems introduced in -rc1. - A number of race conditions fixed in our MMU handling code. - A fix for the guest being able to program the debug extensions for the host on the 32-bit side. PPC: - Fixes for build failures with PR KVM configurations. - A fix for a host crash that can occur on POWER9 with radix guests. x86: - Fixes for nested PML and nested EPT. - A fix for crashes caused by reserved bits in SSE MXCSR that could have been set by userspace. - An optimization of halt polling that fixes high CPU overhead. - Fixes for four reports from Dan Carpenter's static checker. - A protection around code that shouldn't have been preemptible. - A fix for port IO emulation. -----BEGIN PGP SIGNATURE----- iQEcBAABCAAGBQJZHzY3AAoJEED/6hsPKofocI8H/AiOHXi6AC/3s9Ok3IbN/Wp6 +xSm1yqgxitGhpmKIJQyKMUTV0t8SblRV2nxvW7/MEyfl7vztiyWENaVFc6pO6N7 GbnLvdImZ9aypoBaxVOY8WG/CHw2XZ7oUYyBIGrWECH3k+fptBNdISFK3D76+4G2 +tAuWSpKSQFwjGxtreUSlnvQBp6Tjh/PqTyxslPs4zYCL6UPKSSVAoxy4yOKj3AX G03tx/1U1n/hSJHub9RFqho4dhVGT/p3V6oppZmS1g/ZqGPQwK1wxlYquHOtORFR Iq8LdkNQwTdkLlTTOG+tamYSfzn0+KhczfWjIh6ZEb79ARrUSnBU4Awpvom1C2A= =B6Rl -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Radim Krčmář: "ARM: - a fix for a build failure introduced in -rc1 when tracepoints are enabled on 32-bit ARM. - disable use of stack pointer protection in the hyp code which can cause panics. - a handful of VGIC fixes. - a fix to the init of the redistributors on GICv3 systems that prevented boot with kvmtool on GICv3 systems introduced in -rc1. - a number of race conditions fixed in our MMU handling code. - a fix for the guest being able to program the debug extensions for the host on the 32-bit side. PPC: - fixes for build failures with PR KVM configurations. - a fix for a host crash that can occur on POWER9 with radix guests. x86: - fixes for nested PML and nested EPT. - a fix for crashes caused by reserved bits in SSE MXCSR that could have been set by userspace. - an optimization of halt polling that fixes high CPU overhead. - fixes for four reports from Dan Carpenter's static checker. - a protection around code that shouldn't have been preemptible. - a fix for port IO emulation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (27 commits) KVM: x86: prevent uninitialized variable warning in check_svme() KVM: x86/vPMU: fix undefined shift in intel_pmu_refresh() KVM: x86: zero base3 of unusable segments KVM: X86: Fix read out-of-bounds vulnerability in kvm pio emulation KVM: x86: Fix potential preemption when get the current kvmclock timestamp KVM: Silence underflow warning in avic_get_physical_id_entry() KVM: arm/arm64: Hold slots_lock when unregistering kvm io bus devices KVM: arm/arm64: Fix bug when registering redist iodevs KVM: x86: lower default for halt_poll_ns kvm: arm/arm64: Fix use after free of stage2 page table kvm: arm/arm64: Force reading uncached stage2 PGD KVM: nVMX: fix EPT permissions as reported in exit qualification KVM: VMX: Don't enable EPT A/D feature if EPT feature is disabled KVM: x86: Fix load damaged SSEx MXCSR register kvm: nVMX: off by one in vmx_write_pml_buffer() KVM: arm: rename pm_fake handler to trap_raz_wi KVM: arm: plug potential guest hardware debug leakage kvm: arm/arm64: Fix race in resetting stage2 PGD KVM: arm/arm64: vgic-v3: Use PREbits to infer the number of ICH_APxRn_EL2 registers KVM: arm/arm64: vgic-v3: Do not use Active+Pending state for a HW interrupt ... |
||
Arnd Bergmann
|
0527873b29 |
ARM: remove duplicate 'const' annotations'
gcc-7 warns about some declarations that are more 'const' than necessary:
arch/arm/mach-at91/pm.c:338:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
static const struct of_device_id const ramc_ids[] __initconst = {
arch/arm/mach-bcm/bcm_kona_smc.c:36:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
static const struct of_device_id const bcm_kona_smc_ids[] __initconst = {
arch/arm/mach-spear/time.c:207:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
static const struct of_device_id const timer_of_match[] __initconst = {
arch/arm/mach-omap2/prm_common.c:714:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = {
arch/arm/mach-omap2/vc.c:562:35: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = {
The ones in arch/arm were apparently all introduced accidentally by one
commit that correctly marked a lot of variables as __initconst.
Fixes:
|
||
Olof Johansson
|
ec16187a63 |
Fixes for omaps for v4.12-rc cycle most consisting of few minor dts fixes
for various devices. Also included is a memory controller (GPMC) debug output fix as without that the shown bootloader configured GPMC bus width will be wrong and won't work for kernel timings: - Add dra7 powerhold configuration to be able to shut down pmic correctly - Fix polarity for gta04 mcbsp4 clocks for modem - Fix Pandaboard CEC pin pull making it usable - Fix LogicPD Torpedo camera pin mux - Fix GPMC debug bus width - Reduce cpu thermal shutdown temperature -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlkdw8ARHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXOERBAA0y2DvjgvpYL+AefHlaoeN8OW6PL/GB29 sCZglf3Tc7pdmqJQXFbj1UqqPHCw3tnSAbfYwcOdiFr8g2ni0A9s9HjKoIZQzphw s+llq282YdTi+pWxjQ79OvkxhTJZnKX0G8Ls31klmHT/4/vIGsiTuYodum3FN0n2 /uFGDGBljjMGyE69klJ6LD13VXcXSe0ESK5iIV/naVMbdzLFUW9kAxMz6IL3TO48 gP/wOpJmksq3l+vFUc/XOrNX3rIFoS/coegYUM5lkFNHtIiooIbvWrTnc6Ub/0oV XXEoijIUSralcouYyMLdTco+ag/qBtd4xpHdEYGFg04HQrvI7iEF6OAW2MAgjW5z D9X5CMqkPaMRf6X2/LaVQ6sqrcw2t75lW6sRX/y9N2fH4WtchYyhpMVhw+OH241x LNLmV7HaNkE0AaWSjHtYUA1HFhMUWHqQAPqy5GWfxoJvzx7HofG1txiLRF9rUzBt OZ30uWUpVi3koJBVG12Rz+UhN90H4/qK+kwDcQOOEDNd1kQcT/QNFew3fGBNqkDL PivoXWAJnbEJQ6Xr+ablemE7hyyBHHJxDAQsOLh4VitxEPw1TYh4/widUi52/0VQ PMUdbIBhQJp6St7TtUWW8CckdzbjsAMk0zJgcZeBXmczfTjH8PMOuxLvATUweEf+ JD+zCBBfXFU= =My0U -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.12/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.12-rc cycle most consisting of few minor dts fixes for various devices. Also included is a memory controller (GPMC) debug output fix as without that the shown bootloader configured GPMC bus width will be wrong and won't work for kernel timings: - Add dra7 powerhold configuration to be able to shut down pmic correctly - Fix polarity for gta04 mcbsp4 clocks for modem - Fix Pandaboard CEC pin pull making it usable - Fix LogicPD Torpedo camera pin mux - Fix GPMC debug bus width - Reduce cpu thermal shutdown temperature * tag 'omap-for-v4.12/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Reduce cpu thermal shutdown temperature memory: omap-gpmc: Fix debug output for access width ARM: dts: LogicPD Torpedo: Fix camera pin mux ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES ARM: dts: gta04: fix polarity of clocks for mcbsp4 ARM: dts: dra7: Add power hold and power controller properties to palmas Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Olof Johansson
|
6a3538c174 |
i.MX fixes for 4.12:
- A fix on GPCv2 power domain driver Kconfig which causes a build failure when CONFIG_PM is not set. - Pull down PMIC IRQ pin for imx53-qsrb board to prevent spurious PMIC interrupts from happening. - Remove board level OPP override for imx6sx-sdb to fix a boot crash seen on Rev.C boards. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJZHav8AAoJEFBXWFqHsHzOPWMH/RP4LuJDUoFaPUJ3WsrMhPYR qmBEzZXvjKBxImFCIiG09vcjQIiN9p5uZ9AqNIQGgoW20DlFKVZ0Rd64MJzp8QnL J/WwEDTG1qs2jCkNWYkFEUwz6fMWzzTUydj665dkQI3SNwRAJ9dE0LgybM6Yws3C FQdIUyWR2z8QQYqjLTD9XuDe7ewyoslvFssWRiVzpcnkiu8sWgbTuJ/K+ISCgwo4 rC6Vi7Z4WU47SgL7+d9sOMzDPDIif5mOdfW8uG3tgCeDp/8WNz9IbamCuxhggQpa +k9jaTHAtOV9ypf1PBUCGHazU7E8hc42XoW6XT0yY3sFynw+VPd1IFVXiWAEBu0= =gQA8 -----END PGP SIGNATURE----- Merge tag 'imx-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.12: - A fix on GPCv2 power domain driver Kconfig which causes a build failure when CONFIG_PM is not set. - Pull down PMIC IRQ pin for imx53-qsrb board to prevent spurious PMIC interrupts from happening. - Remove board level OPP override for imx6sx-sdb to fix a boot crash seen on Rev.C boards. * tag 'imx-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: add PM dependency for IMX7_PM_DOMAINS ARM: dts: imx6sx-sdb: Remove OPP override ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Linus Walleij
|
877dd4b1f7 |
ARM: configs: add a gemini defconfig
It makes sense to have a stripped-down defconfig for just Gemini, as it is a pretty small platform used in NAS etc, and will use appended device tree. It is also quick to compile and test. Hopefully this defconfig can be a good base for distributions such as OpenWRT. I plan to add in the config options needed for the different variants of Gemini as we go along. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Olof Johansson
|
5cb1ac0f79 |
This pull request contains Broadcom ARM-based SoC Device Tree fixes for
4.12, please pull the following: - Baruch provides several fixes for the Raspberry Pi (BCM2835) Device Tree source include file: uart0 pinctrl node names, pin number for i2c0, uart0 rts/cts pins and invalid uart1 pin, missing numbers for ethernet aliases -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZF8+xAAoJEIfQlpxEBwcERmUP/iAf5euX/RPb3eJ8QmDhn2ap bnU4Puh5aT16fwqK/fohpzqcxhlkqsPhIvl6gwi6UHzNbZOqhz2gwXBjP7DuDsPx rNF7qJE0zFCy/jmhiSbMWiC62Q7UbIR+TmtP3cFzXw8edM6Tjp+IFkE8fuSmQkdd /djp+3k16KNRsSu+iyNDJSu4jNjigKP1DYPFJi0cMceQZ2Hr6KHO7r2mHXmZ8Cf7 cxIPw38ZRiwIU6gbyPrVSLjJJ1X3O3QAyqlTbeooJn5bZ6cEc7jt2LlUUoLY2JTQ +2HoT2DsrDX8SfkJmyBr41/awsHq2wx+++zss3qd9LHKqRyKBZgY6HVea05+z1T9 +FtWZ74zmOzHrjqwB5a3fN4+EfY4HKqSDVnrgbNu9Y59LCZPeVSLcFK1rpuLnu62 ZaeTTOmwhwzetOGi96+2LhnMihFbGoB5te+y8nZtf9vAONp6nLsDgQ30gqGC6/19 JeR+5z+z++7TpsghLJ+YlE4HjxMRV5zFYTLmHHI76DJOCb8i48wMURDizPHZYuaq +aRiBJkmweZtu1KJea867UIDblgk2K9QosL35lomrD518VeTIgSrmBrux7fwlMC/ r8Z0B3z632gNYi+ZrR/Fr+9lmHpq7NBqEai5BAwI1DkwW3HfdeSAczZ5Tij42eGA U2qLiZSH7U/8cb6mCp0H =6jUO -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-4.12/devicetree-fixes' of http://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom ARM-based SoC Device Tree fixes for 4.12, please pull the following: - Baruch provides several fixes for the Raspberry Pi (BCM2835) Device Tree source include file: uart0 pinctrl node names, pin number for i2c0, uart0 rts/cts pins and invalid uart1 pin, missing numbers for ethernet aliases * tag 'arm-soc/for-4.12/devicetree-fixes' of http://github.com/Broadcom/stblinux: ARM: dts: bcm2835: add index to the ethernet alias ARM: dts: bcm2835: fix uart0/uart1 pins ARM: dts: bcm2835: fix i2c0 pins ARM: dts: bcm2835: fix uart0 pinctrl node names Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Olof Johansson
|
d5d332d3f7 |
devicetree: Move include prefixes from arch to separate directory
We use a directory under arch/$ARCH/boot/dts as an include path
that has links outside of the subtree to find dt-bindings from under
include/dt-bindings. That's been working well, but new DT architectures
haven't been adding them by default.
Recently there's been a desire to share some of the DT material between
arm and arm64, which originally caused developers to create symlinks or
relative includes between the subtrees. This isn't ideal -- it breaks
if the DT files aren't stored in the exact same hierarchy as the kernel
tree, and generally it's just icky.
As a somewhat cleaner solution we decided to add a $ARCH/ prefix link
once, and allow DTS files to reference dtsi (and dts) files in other
architectures that way.
Original approach was to create these links under each architecture,
but it lead to the problem of recursive symlinks.
As a remedy, move the include link directories out of the architecture
trees into a common location. At the same time, they can now share one
directory and one dt-bindings/ link as well.
Fixes:
|
||
Olof Johansson
|
5252d73756 |
Linux 4.12-rc1
-----BEGIN PGP SIGNATURE----- iQEcBAABAgAGBQJZF2pwAAoJEHm+PkMAQRiG9aAIAJJyV6Ux9kaX+glqO3KIs0wm 0K/yqMOv1JTfJ1UUgY4iZbk5XOPPmXv1bdKJFECZfuAHdymJUF/RVNNvDlZbaLdd K8vDEi92eRwcf07a5b/Q2F8yNfADKKmRAA/oAbuQLBhJ0dPHig70PIvi9gq9kqiE Ft1MinbsZLavYatLm7oVDr/nsYebEDMGwTy0EX5bF2YjydfAlCvVWnI5ld5wisiV 0fQF4W7MMjjcpAzG8uq3atEB8iQcWS2Ykz2chZRbYzHcdV2WJW751Vge9xc05Hzi rxlqn6peZFiFyM0qdPLhY0ktGzSTZcCFeb3aZicvm5aOamy2KJjOSZrEwjU8kts= =VHpx -----END PGP SIGNATURE----- Merge tag 'v4.12-rc1' into fixes We've received a few fixes branches with -rc1 as base, but our contents was still at pre-rc1. Merge it in expliticly to make 'git merge --log' clear on hat was actually merged. Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Ravikumar Kattekola
|
bca5238816 |
ARM: dts: dra7: Reduce cpu thermal shutdown temperature
On dra7, as per TRM, the HW shutdown (TSHUT) temperature is hardcoded to 123C and cannot be modified by SW. This means when the temperature reaches 123C HW asserts TSHUT output which signals a warm reset. This reset is held until the temperature goes below the TSHUT low (105C). While in SW, the thermal driver continuously monitors current temperature and takes decisions based on whether it reached an alert or a critical point. The intention of setting a SW critical point is to prevent force reset by HW and instead do an orderly_poweroff(). But if the SW critical temperature is greater than or equal to that of HW then it defeats the purpose. To address this and let SW take action before HW does keep the SW critical temperature less than HW TSHUT value. The value for SW critical temperature was chosen as 120C just to ensure we give SW sometime before HW catches up. Document reference SPRUI30C – DRA75x, DRA74x Technical Reference Manual - November 2016 SPRUHZ6H - AM572x Technical Reference Manual - November 2016 Tested on: DRA75x PG 2.0 Rev H EVM Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
Adam Ford
|
56322e1232 |
ARM: dts: LogicPD Torpedo: Fix camera pin mux
Fix commit
|
||
Hans Verkuil
|
f0b8dca833 |
ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES
The CEC pin was always pulled up, making it impossible to use it. Change to PIN_INPUT so it can be used by the new CEC support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> |
||
Andreas Kemnade
|
910958b65c |
ARM: dts: gta04: fix polarity of clocks for mcbsp4
The clock polarity setting of the mcbsp connected to the modem was wrong so almost only noise was received. With this patch it is also the same as it was on earlier non-dt kernels where it was working properly Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
Keerthy
|
7c62de5f3f |
ARM: dts: dra7: Add power hold and power controller properties to palmas
Add power hold and power controller properties to palmas node. This is needed to shutdown pmic correctly on boards with powerhold set. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
Zhichao Huang
|
9b619a8f08 |
KVM: arm: rename pm_fake handler to trap_raz_wi
pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Signed-off-by: Zhichao Huang <zhichao.huang@linaro.org> Reviewed-by: Alex Bennee <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org> |
||
Zhichao Huang
|
661e6b02b5 |
KVM: arm: plug potential guest hardware debug leakage
Hardware debugging in guests is not intercepted currently, it means that a malicious guest can bring down the entire machine by writing to the debug registers. This patch enable trapping of all debug registers, preventing the guests to access the debug registers. This includes access to the debug mode(DBGDSCR) in the guest world all the time which could otherwise mess with the host state. Reads return 0 and writes are ignored (RAZ_WI). The result is the guest cannot detect any working hardware based debug support. As debug exceptions are still routed to the guest normal debug using software based breakpoints still works. To support debugging using hardware registers we need to implement a debug register aware world switch as well as special trapping for registers that may affect the host state. Cc: stable@vger.kernel.org Signed-off-by: Zhichao Huang <zhichao.huang@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org> |
||
Marc Zyngier
|
501ad27c67 |
arm: KVM: Do not use stack-protector to compile HYP code
We like living dangerously. Nothing explicitely forbids stack-protector to be used in the HYP code, while distributions routinely compile their kernel with it. We're just lucky that no code actually triggers the instrumentation. Let's not try our luck for much longer, and disable stack-protector for code living at HYP. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org> |
||
Marc Zyngier
|
01630ab854 |
ARM: KVM: Fix tracepoint generation after move to virt/kvm/arm/
Moving most of the shared code to virt/kvm/arm had for consequence
that KVM/ARM doesn't build anymore, because the code that used to
define the tracepoints is now somewhere else.
Fix this by defining CREATE_TRACE_POINTS in coproc.c, and clean-up
trace.h as well.
Fixes:
|
||
Leonard Crestez
|
d8581c7c8b |
ARM: dts: imx6sx-sdb: Remove OPP override
The board file for imx6sx-sdb overrides cpufreq operating points to use
higher voltages. This is done because the board has a shared rail for
VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage
needs to be a value suitable for both ARM and SOC.
This only applies to LDO bypass mode, a feature not present in upstream.
When LDOs are enabled the effect is to use higher voltages than necessary
for no good reason.
Setting these higher voltages can make some boards fail to boot with ugly
semi-random crashes reminiscent of memory corruption. These failures only
happen on board rev. C, rev. B is reported to still work.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes:
|
||
Fabio Estevam
|
2fe4bff351 |
ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin
Currently the following errors are seen: [ 14.015056] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.321093] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.411681] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.456281] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 30.527106] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 36.596900] mc13xxx 0-0008: Failed to read IRQ status: -6 Also when reading the interrupts via 'cat /proc/interrupts' the PMIC GPIO interrupt counter does not stop increasing. The reason for the storm of interrupts is that the PUS field of register IOMUXC_SW_PAD_CTL_PAD_CSI0_DAT5 is currently configured as: 10 : 100k pullup and the PMIC interrupt is being registered as IRQ_TYPE_LEVEL_HIGH type, which is the correct type as per the MC34708 datasheet. Use the default power on value for the IOMUX, which sets PUS field as: 00: 360k pull down This prevents the spurious PMIC interrupts from happening. Commit |
||
Florian Fainelli
|
b155f05dc5 |
This pull request brings back bcm2835 DT fixups from Baruch Siach that
got misplaced after a PR for 4.11 got rejected. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE/JuuFDWp9/ZkuCBXtdYpNtH8nugFAljdV0wACgkQtdYpNtH8 nugY6Q//a8M4fzc878CjvARB8Y1ezIDJn71YzNkRr59PmYbdHck9IXCrJCglODMO kX8YBlYvH6aoYxZ0gvalCdTMwrzy3h63bkc8RtF1PbNnSlQppJ9EyvKLP+eZmm4H HQZXCLiFU97YThXuPozIBtJrMhFR623+Q0offp0nrTNcl+jklFFAA2zjH+GoKl0N SqAVuQEOO6Ru3yqFzCwMtedCgXtAZrp9Ady6/AjXnhH9GCmhsuL8DR7dr9qlzeWU NPlQMwdbaRe5kGd01VcSbJwQigiXxpuKtz5FISAA5SS9MJrFzH+dx7hOvvhLBNaE uyG2B2abV5zKltxZIm7J/CIpPN4JfSQVfcL3DtAlIdlBY8kjd68Dqi8wYqIsvRPd s0LqTaXQwvnvgVK8Gd9tUQVsGd8mL70rf5Kj40nhc8tijXAfcKB0C+ft8knnmyN5 W4Us0zHUCEY0uGyXg7I+JU6tDhOGaGU2pRp3nFAPNbSllMaAfRQhnybzegryvyUe R0bEI1VF/v32tuxcH180HZnvZPwkzzyTh11OxAkxNxHIGLCLPYNGrsaLj7eNUcWK DyNzSWCsMjgrVGV0o/0JFHGu9oVpdX1LheSTSXaYgLbWi+O+7Be8HT3q1GI553Pd LI39tPZCC9nL3ncHqPVb0bD58VIvllIE2n+XICKQ6TA24LTPJos= =mCCH -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZF85cAAoJEIfQlpxEBwcEr5cP/j+Ss+ywZs2nv+121V6DoG16 jQJgrQ5g+GOcPumXJ/eoiONgTX28awSdmjLbQgKK6rUNea17KtBTD75zwiO/iNh9 D6hagRHg9m1vqAw2Dwkqkrjh+NKL0xrY10pE6t+IMfApW6WJJI9haubZmPFpA4Rh n/x83TavunuAfoYqdhLAZn+tMrOkgLjkFqCdtmOLHnkyyOax0eDX0zYAjM1+9jXT mKQ1v6sVJ3+kCc9bjHhPgR6ccejCJR//wMGUTmaahYlZIM+oHKV3KfGEL4VrH/ji XthHglLpr0+uyosY4q0x00eDtWwCGDmexK/C7lBw/10sG4ENIj+Tma8tSQYlla6H rMnH5VpGcvWvsYCL+wJ47Tqe8z2I/ulp4NSMIA8SzD4DjDD2SMlQvv9iKUAguw5r MMDkXxtEb22xu5SZLEoQdyOfu+MVZeSQkSVtnRSB8BXE++aYp9e4ZDH8V/+xuQQU 7cg9KyXHQnwMki5+JmziaPJX743fHKV7kZ6Lj5r6YF0EkMITJ3rud1Wg4rh6Pv66 paVfj259IudHWljshMfzvEGeTiwdEiwB12K47pWBBhVuucA4QzJnOROBbB5INy0W aVHZ5LYsE7QZ+KkSVWBbPW8XezwqhvHbJ4zXhh/q6jLjIJHqckR+HRPFz/neereR FtejY7440d+ePhk53VEv =h9/E -----END PGP SIGNATURE----- Merge tag 'bcm2835-dt-next-2017-03-30' into devicetree/fixes This pull request brings back bcm2835 DT fixups from Baruch Siach that got misplaced after a PR for 4.11 got rejected. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
||
Linus Torvalds
|
e47b40a235 |
arm64 2nd set of updates for 4.12:
- Silence module allocation failures when CONFIG_ARM*_MODULE_PLTS is enabled. This requires a check for __GFP_NOWARN in alloc_vmap_area() - Improve/sanitise user tagged pointers handling in the kernel - Inline asm fixes/cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZFJszAAoJEGvWsS0AyF7xASwQAKsY72jJMu+FbLqzn9vS7Frx AGlx+M20odn6htFBBEDhaJQxFTFSfuBUNb6z4WmRsVVcVZ722EHsvEFFkHU4naR1 lAdZ1iFNHBRwGxV/JwCt08JwG0ipuqvcuNQH7XaYeuqldQLWaVTf4cangH4cZGX4 Fcl54DI7Nfy6QYBnfkBSzi6Pqjhkdn6vh1JlNvkX40BwkT6Zt9WryXzvCwQha9A0 EsstRhBECK6yCSaBcp7MbwyRbpB56PyOxUaeRUNoPaag+bSa8xs65JFq/yvolmpa Cm1Bt/hlVHvi3rgMIYnm+z1C4IVgLA1ouEKYAGdq4IpWA46BsPxwOBmmYG/0qLqH b7F5my5W8bFm9w1LI9I9l4FwoM1BU7b+n8KOZDZGpgfTwy86jIODhb42e7E4vEtn yHCwwu688zkxoI+JTt7PvY3Oue69zkP1/kXUWt5SILKH5LFyweZvdGc+VCSeQoGo fjwlnxI0l12vYIt2RnZWGJcA+W/T1E4cPJtIvvid9U9uuXs3Vv/EQ3F5wgaXoPN2 UDyJTxwrv/iT2yMoZmaaVh36+6UDUPV+b2alA9Wq/3996axGlzeI3go+cdhQXj+E 8JFzWph+kIZqCnGUaWMt/FTphFhOHjMxC36WEgxVRQZigXrajdrKAgvCj+7n2Qtm X0wL+XDgsWA8yPgt4WLK =WZ6G -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Catalin Marinas: - Silence module allocation failures when CONFIG_ARM*_MODULE_PLTS is enabled. This requires a check for __GFP_NOWARN in alloc_vmap_area() - Improve/sanitise user tagged pointers handling in the kernel - Inline asm fixes/cleanups * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Silence first allocation with CONFIG_ARM64_MODULE_PLTS=y ARM: Silence first allocation with CONFIG_ARM_MODULE_PLTS=y mm: Silence vmap() allocation failures based on caller gfp_flags arm64: uaccess: suppress spurious clang warning arm64: atomic_lse: match asm register sizes arm64: armv8_deprecated: ensure extension of addr arm64: uaccess: ensure extension of access_ok() addr arm64: ensure extension of smp_store_release value arm64: xchg: hazard against entire exchange variable arm64: documentation: document tagged pointer stack constraints arm64: entry: improve data abort handling of tagged pointers arm64: hw_breakpoint: fix watchpoint matching for tagged pointers arm64: traps: fix userspace cache maintenance emulation on a tagged pointer |
||
Florian Fainelli
|
75d24d968a |
ARM: Silence first allocation with CONFIG_ARM_MODULE_PLTS=y
When CONFIG_ARM_MODULE_PLTS is enabled, the first allocation using the module space fails, because the module is too big, and then the module allocation is attempted from vmalloc space. Silence the first allocation failure in that case by setting __GFP_NOWARN. Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
Linus Torvalds
|
791a9a666d |
Kbuild UAPI header export updates for v4.12
Improvement of headers_install by Nicolas Dichtel. It has been long since the introduction of uapi directories, but the de-coupling of exported headers has not been completed. Headers listed in header-y are exported whether they exist in uapi directories or not. His work fixes this inconsistency. All (and only) headers under uapi directories are now exported. The asm-generic wrappers are still exceptions, but this is a big step forward. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZE7MBAAoJED2LAQed4NsGroAP/iARejrIFmxuH96D5h2aiP1j c8KHQ+5fuq4w2KBmfbfkNvWbazlVheT6RrYWBUh/GABGsSqQC07d8New6B8TaUkE K0E48RsuYxouP18Ys6BOO4/zyRhEFD7Ta72PGQ/gDQY+6hAu4jYQnMdG0wipTblS QWgnUxTqfCbTjnRpRKXpcwRff+OeTWtOv3s0V8UashJUxnFVQ7Br2uRsm/KKkU/k jQC65KyHL4HlsFeeAiMmQ9IQPVwLsd6+d5crs0nydHaJ2XrFlNNQ7EEMyG8FxPdx 9b/VpS+XY6DO+jeqkcpFrdL9IgcmCn72Qc5/4vrHuQO2dpWW5mVaVPq9RAGP0Yq/ FB0vZRTp/tOIkD+0esirZW2gJtU3DWMY1A9rc5jjLRabdnRXVTdLfhEnksYJEfES yPbDEuKyzo6a+zBSqNtMquJPmYVYEDS2mcmgxY5sB58qtXkUN2Yr+uUALxC8XhXW SHHwIAV3a+UX5ZU9Ys8dp2hI4EXYXtdvsz2zvl4qPIn/Q9d1YoEJRe7/Y0p8gBXM 5pVJ1yohKoYrNZVGBe0LO/gHGVAVgMj0cKn0Xg51bbvjxY2U5djUbMY0uw1gFrrM O9ld3C6O8zH5BsExCfwp9iPz2SW5W9N80kgnKfjCHBRUKuMTkm02DJf8Hx+pyfVQ DCy9lYTi76IgZ1uflKq9 =Rqdo -----END PGP SIGNATURE----- Merge tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild UAPI updates from Masahiro Yamada: "Improvement of headers_install by Nicolas Dichtel. It has been long since the introduction of uapi directories, but the de-coupling of exported headers has not been completed. Headers listed in header-y are exported whether they exist in uapi directories or not. His work fixes this inconsistency. All (and only) headers under uapi directories are now exported. The asm-generic wrappers are still exceptions, but this is a big step forward" * tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: arch/include: remove empty Kbuild files uapi: export all arch specifics directories uapi: export all headers under uapi directories smc_diag.h: fix include from userland btrfs_tree.h: fix include from userland uapi: includes linux/types.h before exporting files Makefile.headersinst: remove destination-y option Makefile.headersinst: cleanup input files x86: stop exporting msr-index.h to userland nios2: put setup.h in uapi h8300: put bitsperlong.h in uapi |
||
Linus Torvalds
|
23ea3f62f3 |
Kbuild misc updates for 4.12
- Clean up builddeb script - Use full path for KBUILD_IMAGE to fix rpm-pkg build - Fix objdiff tool to ignore debug info -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZE6tOAAoJED2LAQed4NsG2o4P/ii2YuHMrxUh5J6KbC1ilLLC aGcapg+CQ+pFqMeVIbofaEdJI/+vofajG8Eh5vVr8R4Hj3i7PA+2AFgg3cNe2hFE OSHJbb3YTkYJJzG+s+BynF1dla03Yyo/sOHoV4yRst/hiEJHpLlOJgieIM9bv8pq 1DjBseHSrPGqUtvBuLoNwCbylhgyHiL5FycH//dpVbpNpoiy+HzSrcmXgT+rtbwJ qPEdf5QqapM0T83uxaYDko6VRYBIHOu9kQnVMUKS9+Qsqxm0NzO7Q8fFMdZpA8QY HCTFCQszeJid4VZO7VqKVCV40g3KGdAuCPPW7lZZO0H/AVEVqUv9PWOnuPCiyhJc ZXX7fmehvToHC0lbpC4GCHEQ9VxKF3KiNJUusDkFm63oSmvoaiRR2GGzWidpQ0eq l/lWB2/YygCQjs+kucDLhdIQjW89lkIBehXtZ28gkRYiLCbvQBpINHXrvZ/ai5uO hJ8hVyWnCkghm7alQDCktohMgRmcgUMPTByYcfbQG03vYBVITS9FBzvfSJgmRksQ DhPLakWq2Wlsx7DjjedELmO4JFn17oyi3av71lgiN5FjW9TBLxq3XmeHKu+avjEk LHisT5lCzh0YjyEhfSSkBtz2iyDBZhNUJKmw1Tf89owbKUMPnlxGjZtbmvQkv/qk 5GdCH7YJG+XchdlDi70b =vptn -----END PGP SIGNATURE----- Merge tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull misc Kbuild updates from Masahiro Yamada: - clean up builddeb script - use full path for KBUILD_IMAGE to fix rpm-pkg build - fix objdiff tool to ignore debug info * tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: builddeb: fix typo builddeb: Update a few outdated and hardcoded strings deb-pkg: Remove the KBUILD_IMAGE workaround unicore32: Use full path in KBUILD_IMAGE definition sh: Use full path in KBUILD_IMAGE definition arc: Use full path in KBUILD_IMAGE definition arm: Use full path in KBUILD_IMAGE definition arm64: Use full path in KBUILD_IMAGE definition scripts: objdiff: Ignore debug info when comparing |
||
Linus Torvalds
|
b5a53b61a2 |
Sort of on the quieter side this time, which is probably due more
to me not catching up as quickly on patch review than anything else. Overall it seems normal though, a few small changes to the core, mostly small non-critical fixes here and there as well as driver updates for new and existing hardware support. The biggest things are the TI clk driver rework to lay the groundwork for clkctrl support in the next merge window and the AmLogic audio/graphics clk support. Core: * clk_possible_parents debugfs file so we know which parents a clk could possibly have * Fix to make clk rate change notifiers stop on the first failure instead of continuing New Drivers: * Mediatek MT6797 SoCs * hi655x PMIC clks * AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks * Allwinner H5 SoCs and PRCM hardware Updates: * Nvidia Tegra T210 cleanups and non-critical fixes * TI OMAP cleanups in preparation for clkctrl support * Trivial fixes like kcalloc(), devm_* conversions, and seq_puts() * ZTE zx296718 SoC VGA clks * Rockchip clk-ids, fixups, and rename of rk1108 to rv1108 * Support for IDT VersaClock 5P49V5935 * Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3 support -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABCAAGBQJZE0YJAAoJEK0CiJfG5JUl9tEQAKVJx8VztYGt1REoFMtEEHmO azhxT/uYGgdOMAr9a3mQxqfm5cJbjnb1EZj2RfC1XHs31BF66j40y9+5d8hY8Hzu 5IkY86s77TlqxGLwQcAsU75Q9cFrEW9X0KJ6OSzlrcc5hKlAEk/Z5lBKoQAm3mlU JqD4DSyFqP0X3YSxV5R7yfarb/X3ekCiQ13EDrPRRhyvHUi6ReUJDDgbPHtA+O2c ftLAARmxjzitzyvdXokXudkfNm8F5KePK+QkVikf6D/q+kx1D0BNJwZIjhpoiksn z6LImLQ8l91AWghmqqpOFXolxQncPU+bJIL9Pox76p5b3EzbQuthIafiso8KsDST 4g3mHm42Yfx9uoF+U+pR8IeZfj5yQT91bvf8naPz/ngWMAlLP1IKJUvJN6jeTiwe cO6GIec1OH40Xl7v/9EafMwDcnFG0cwQmzr/M6wi1dUlmbSygP9NOMTHlr6W/0wa K2hCD6b5UHEgHmdfiJbZ2tKxLO0e8LABW+AU8fQH5S2eNe14vY0GvCzfAq5MArIz QRpso/kdtGpTpwMEvV6PUmJ0IxYEjtNJVjGJYbORwios0SK0Xl6bJWf7gwn5crB6 nua9tVZtJEOHJS7S+ESp3VvuXj2/UGPoRRf5OsERo1S6ydGUQH+wDi1SJMdo/vtX bIPzIw6WPxMp24JyKOhh =/5a/ -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Sort of on the quieter side this time, which is probably due more to me not catching up as quickly on patch review than anything else. Overall it seems normal though, a few small changes to the core, mostly small non-critical fixes here and there as well as driver updates for new and existing hardware support. The biggest things are the TI clk driver rework to lay the groundwork for clkctrl support in the next merge window and the AmLogic audio/graphics clk support. Core: - clk_possible_parents debugfs file so we know which parents a clk could possibly have - Fix to make clk rate change notifiers stop on the first failure instead of continuing New Drivers: - Mediatek MT6797 SoCs - hi655x PMIC clks - AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks - Allwinner H5 SoCs and PRCM hardware Updates: - Nvidia Tegra T210 cleanups and non-critical fixes - TI OMAP cleanups in preparation for clkctrl support - trivial fixes like kcalloc(), devm_* conversions, and seq_puts() - ZTE zx296718 SoC VGA clks - Rockchip clk-ids, fixups, and rename of rk1108 to rv1108 - IDT VersaClock 5P49V5935 support - Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3 support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (151 commits) clk: x86: pmc-atom: Checking for IS_ERR() instead of NULL clk: ti: divider: try to fix ti_clk_register_divider clk: mvebu: Use kcalloc() in two functions clk: mvebu: Use kcalloc() in of_cpu_clk_setup() clk: nomadik: Delete error messages for a failed memory allocation in two functions clk: nomadik: Use seq_puts() in nomadik_src_clk_show() clk: Improve a size determination in two functions clk: Replace four seq_printf() calls by seq_putc() clk: si5351: Delete an error message for a failed memory allocation in si5351_i2c_probe() clk: si5351: Use devm_kcalloc() in si5351_i2c_probe() clk: at91: Use kcalloc() in of_at91_clk_pll_get_characteristics() reset: mediatek: Add MT2701 ethsys reset controller include file clk: mediatek: add mt2701 ethernet reset clk: hi6220: Add the hi655x's pmic clock clk: ti: fix building without legacy omap3 clk: ti: fix linker error with !SOC_OMAP4 clk: hi3620: Fix a typo in one variable name clk: hi3620: Delete error messages for a failed memory allocation in two functions clk: hi3620: Use kcalloc() in hi3620_mmc_clk_init() clk: hisilicon: Delete error messages for failed memory allocations in hisi_clk_init() ... |
||
Linus Torvalds
|
5ccd414080 |
Second round of KVM Changes for v4.12:
* ARM: bugfixes; moved shared 32-bit/64-bit files to virt/kvm/arm; support for saving/restoring virtual ITS state to userspace * PPC: XIVE (eXternal Interrupt Virtualization Engine) support * x86: nVMX improvements, including emulated page modification logging (PML) which brings nice performance improvements on some workloads -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQEcBAABAgAGBQJZEeusAAoJEL/70l94x66Dq+cH/RkL9znP717k7Z0jS8/FJN9q wKU8j0jRxuqjnvEu89redfFKxElWM9T1fwReBObjWct9+hyJ9Pbpf95Lr9ca39PR zhiBMKl79he0gHV/z48ItuzH1mOrU/KzFfxHYLlBd4oGw0ZdUttWAsUtaWQ8UNFo xtyu2R+CWYLeAUBrpYmkvrOjhnB+S9+f4y2OY9pXsMg4HN9/Tdn0B656yTOWdu9C onO3QQXNY/dzGFLH3tA/kAbz25x4Y+pP2UHlMm5vkW8XWPn+lluUwtBonTKdzy64 RDWWUWcs0k37ps4H9b56oXmz8ZFZ0FQF3MimDQueGHSYOXCxU5EqmC9c7KZmZrg= =KcCv -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more KVM updates from Paolo Bonzini: "ARM: - bugfixes - moved shared 32-bit/64-bit files to virt/kvm/arm - support for saving/restoring virtual ITS state to userspace PPC: - XIVE (eXternal Interrupt Virtualization Engine) support x86: - nVMX improvements, including emulated page modification logging (PML) which brings nice performance improvements on some workloads" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits) KVM: arm/arm64: vgic-its: Cleanup after failed ITT restore KVM: arm/arm64: Don't call map_resources when restoring ITS tables KVM: arm/arm64: Register ITS iodev when setting base address KVM: arm/arm64: Get rid of its->initialized field KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUs KVM: arm/arm64: Slightly rework kvm_vgic_addr KVM: arm/arm64: Make vgic_v3_check_base more broadly usable KVM: arm/arm64: Refactor vgic_register_redist_iodevs KVM: Add kvm_vcpu_get_idx to get vcpu index in kvm->vcpus nVMX: Advertise PML to L1 hypervisor nVMX: Implement emulated Page Modification Logging kvm: x86: Add a hook for arch specific dirty logging emulation kvm: nVMX: Validate CR3 target count on nested VM-entry KVM: set no_llseek in stat_fops_per_vm KVM: arm/arm64: vgic: Rename kvm_vgic_vcpu_init to kvm_vgic_vcpu_enable KVM: arm/arm64: Clarification and relaxation to ITS save/restore ABI KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES KVM: arm64: vgic-its: Fix pending table sync KVM: arm64: vgic-its: ITT save and restore KVM: arm64: vgic-its: Device table save/restore ... |
||
Nicolas Dichtel
|
fcc8487d47 |
uapi: export all headers under uapi directories
Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch/<arch>/include/uapi/asm/Kbuild; - arch/<arch>/include/asm/Kbuild. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Salter <msalter@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
||
Linus Torvalds
|
4879b7ae05 |
dmaengine updates for 4.12-rc1
This time again a smaller update consisting of: - support for TI DA8xx dma controller and updates to the cppi driver - updates on bunch of drivers like xilinx, pl08x, stm32-dma, mv_xor, ioat, dmatest -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZEebIAAoJEHwUBw8lI4NHZgYP/2t/pQiIuy0895tvljtpeqmO +g9waoxF9zWe2vO2R1HZAxT+Et7VGwYahE9+p+7uF8w8CyzT9sN6vASgq5xprlVI n2aZ2Ew8ZTFAoC+lT6Iy63/TFJNGP2gws2n6PrScptN9aQSSLgIn6AbunN1FRZi4 TMuEROV3cLrPuF8qmStsQTqwW28FqQM8YJVZLy6Czak6siRSJDI++4Y1cOBOkGX6 x44sFOuKxKvQW58SO1Dm491UAOh0SO9llB4W8BztGWDFPQtEZKSrBYJtV6ge2BaU UMxT/n1IbzPHYIRhRYitoc2BFKz6wf5ELH9N3qKSB76qbD9KogrEzwFK25CM8Po1 nieHiFEfXDP8rnivxo3PV8ULzSZQ5Z2LGb+1BBqWhtfSlF69V63VWL5ER2kvxGoG klcSx2W2xrN4SpUuAh+koN/80ZE0OZpT+8EYmsJ8zfRg1y8ddn/8a82Q0lJZs979 tbEunqJM0l/bqKDd3PQCEi2tTF0OpdZa6yU/twUSm1MVRNpsrpqoAgo7/mrYF5G4 8rX/D5ihU1UijEYHKgMJHKCg4NFdYG/zqWABJQGbU6vLkOiuaDCzXIg7xZGCBx7R d2A7jYABPp2ljP1D5yTTfjxhN+UtIIiAl4DYz7OKc7dNaOhDz/ahl4oFIw4T7XfS Z4zjnDiDgSVZivS2HzaP =Ygkn -----END PGP SIGNATURE----- Merge tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: "This time again a smaller update consisting of: - support for TI DA8xx dma controller and updates to the cppi driver - updates on bunch of drivers like xilinx, pl08x, stm32-dma, mv_xor, ioat, dmatest" * tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (35 commits) dmaengine: pl08x: remove lock documentation dmaengine: pl08x: fix pl08x_dma_chan_state documentation dmaengine: pl08x: Use the BIT() macro consistently dmaengine: pl080: Fix some missing kerneldoc dmaengine: pl080: Cut some unused defines dmaengine: dmatest: Add check for supported buffer count (sg_buffers) dmaengine: dmatest: Select DMA_ENGINE_RAID as its needed for the slave_sg test dmaengine: virt-dma: Convert to use list_for_each_entry_safe() dma-debug: use offset_in_page() macro dmaengine: mv_xor: use offset_in_page() macro dmaengine: dmatest: use offset_in_page() macro dmaengine: sun4i: fix invalid argument dmaengine: ioat: use setup_timer dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe() dmaengine: pl330: remove pdata based initialization dmaengine: cppi: fix build error due to bad variable dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped dmaengine: cppi41: use managed functions devm_*() dmaengine: cppi41: fix cppi41_dma_tx_status() logic dmaengine: qcom_hidma: pause the channel on shutdown ... |
||
Linus Torvalds
|
28b47809b2 |
IOMMU Updates for Linux v4.12
This includes: * Some code optimizations for the Intel VT-d driver * Code to switch off a previously enabled Intel IOMMU * Support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs * Some header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that * ACPI/IORT updates and fixes * Some Exynos IOMMU optimizations * Code updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches * New command-line option to set default domain type allocated by the iommu core code * Another command line option to allow the Intel IOMMU switched off in a tboot environment * ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) * Various other small fixes and improvements -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZEY4XAAoJECvwRC2XARrjth0QAKV56zjnFclv39aDo6eCq9CT 51+XT4bPY5VKQ2+Jx76TBNObHmGK+8KEMHfT9khpWJtFCDyy25SGckLry1nYqmZs tSTsbj4sOeCyKzOLITlRN9/OzKXkjKAxYuq+sQZZFDFYf3kCM/eag0dGAU6aVLNp tkIal3CSpGjCQ9M5JohrtQ1mwiGqCIkMIgvnBjRw+bfpLnQNG+VL6VU2G3RAkV2b 5Vbdoy+P7ZQnJSZr/bibYL2BaQs2diR4gOppT5YbsfniMq4QYSjheu1xBboGX8b7 sx8yuPi4370irSan0BDvlvdQdjBKIRiDjfGEKDhRwPhtvN6JREGakhEOC8MySQ37 mP96B72Lmd+a7DEl5udOL7tQILA0DcUCX0aOyF714khnZuFU5tVlCotb/36xeJ+T FPc3RbEVQ90m8dYU6MNJ+ahtb/ZapxGTRfisIigB6wlnZa0Evabp9EJSce6oJMkm whbBhDubeEU18n9XAaofMbu+P2LAzq8cxiRMlsDvT4mIy7jO86jjCmhpu1Tfn2GY 4wrEQZdWOMvhUsIhObXA0aC3BzC506uvnKPW3qy041RaxBuelWiBi29qzYbhxzkr DLDpWbUZNYPyFJjttpavyQb2/XRduBTJdVP1pQpkJNDsW5jLiBkpSqm9xNADapRY vLSYRX0JCIquaD+PAuxn =3aE8 -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - code optimizations for the Intel VT-d driver - ability to switch off a previously enabled Intel IOMMU - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs - header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that - ACPI/IORT updates and fixes - Exynos IOMMU optimizations - updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches - new command-line option to set default domain type allocated by the iommu core code - another command line option to allow the Intel IOMMU switched off in a tboot environment - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) - various other small fixes and improvements * tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits) soc/qbman: Move dma-mapping.h include to qman_priv.h soc/qbman: Fix implicit header dependency now causing build fails iommu: Remove trace-events include from iommu.h iommu: Remove pci.h include from trace/events/iommu.h arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() ACPI/IORT: Fix CONFIG_IOMMU_API dependency iommu/vt-d: Don't print the failure message when booting non-kdump kernel iommu: Move report_iommu_fault() to iommu.c iommu: Include device.h in iommu.h x86, iommu/vt-d: Add an option to disable Intel IOMMU force on iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed iommu/arm-smmu: Correct sid to mask iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid() iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code omap3isp: Remove iommu_group related code iommu/omap: Add iommu-group support iommu/omap: Make use of 'struct iommu_device' iommu/omap: Store iommu_dev pointer in arch_data iommu/omap: Move data structures to omap-iommu.h iommu/omap: Drop legacy-style device support ... |
||
Arnd Bergmann
|
e942661130 |
DTS fixes
- mt8173: fix mmc parameters - set timer frequency explicitly and force the driver to set it -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZEfOYAAoJELQ5Ylss8dNDizsP/2/tAoJ66wxdiO3Jd4Wgq+Kb eFwwre2WxcBjuJyzzIxIgnDib0TKgKSjo5qcakSjmp4RNg18Mt1DRP+ty6eJ5Yh8 2c+xtj31lcfCrpi1N6hKqqoW8yYfgrHuQxsrlS4wrUs9YcDcDk6dWAoJ5tUJepE+ TrgZ5zqUiseTW26ULFvUlXDg/qf1rBQPVMeOiV/fmGnyjPvTL5simmLnyR/DZjXO gCccVvqDs1XnzBT0cYDovL+HeayQ7fLRrhpoPiyLFycr5ESSIDYvTnfuFd8Vz5qR 5bM5WVmOfXJ93n0qrWoN+ILQXir3a8Lk9j+9Nx4YuMS0V4CwHFkYZT3WFCFuN76p RwHNI28LQug9d9EDKfX0TgqyHvlE+VLGjIv0lYlH5gEGp0qX2QAwU+g+nhhHiugB GTNv6BwRtceMx7iILsEUnEShYwN5JZmFHeCQyjqGLhVT2Hb2kwudRzA157ObaZNV NLb48+M4qRH9seOM/bp7iARDgS+L9mevJ7IF7OMCdogWDn0Cq+9MvclLR8c8u7Ml M5Nuuto8v2yoXzT7LEp5o4Q8ZxzE4rPsXBsgDu5NQYr5lQFcWskvG3yZJyo5HRA4 OW1ERkRhOcKRQm9bYTVtZZ2au3TJM6P0UBgvY6hFwwRmgHX5MkDBULj8a/vmK2gc 0EvcriDgNEdOgoETO4+y =yOfu -----END PGP SIGNATURE----- Merge tag 'v4.11-next-fixes' of https://github.com/mbgg/linux-mediatek into fixes Pull "DTS fixes" from Matthias Brugger: - mt8173: fix mmc parameters - set timer frequency explicitly and force the driver to set it * tag 'v4.11-next-fixes' of https://github.com/mbgg/linux-mediatek: ARM64: dts: mediatek: configure some fixed mmc parameters arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi |
||
Arnd Bergmann
|
6f92120892 |
ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable
When CONFIG_PM is disabled, we get a build error:
arch/arm/mach-omap2/omap-smp.c: In function 'omap4_smp_maybe_reset_cpu1':
arch/arm/mach-omap2/omap-smp.c:309:20: error: implicit declaration of function 'omap4_get_cpu1_ns_pa_addr'; did you mean 'omap4_get_scu_base'? [-Werror=implicit-function-declaration]
We need to fix this in multiple files, to ensure the declaration is visible,
to actually build the function without CONFIG_PM, and to only call it
when OMAP4 and/or OMAP5 are enabled.
Fixes:
|
||
Linus Torvalds
|
c6778ff813 |
ARM: 64-bit DT updates
Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch of smaller changes, but also some new platforms that are worth mentioning: * Rockchip RK3399 platforms for Chromebooks, including Samsung Chromebook Plus (Kevin) * Orange Pi PC2 (Allwinner H5) * Freescale LS2088A and LS1088A SoCs * Expanded support for Nvidia Tegra186 (and Jetson TX2) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZEA5TAAoJEIwa5zzehBx3uPwP/3NBPKvsDQha/x+PPgtSM1cM pUEF1fxsLftrt+pUeRgMZqGE2xu5vVUKEQsr7KDdWMS9LMs50Pp9dTvfxr7A4Asm WRRMR7Y3gPbr49uf4+JLLmn0hYXTeaoUftVneBj0qU9Flwe3mQDVULiRjPalWYVB g0+NwkPE2lrqrudceA2HiVEXqNlVXCIh2mdMaC7Luo0VEsz7nRHT0TOGPaxnXB3M NoJ56FPHtv3x9+C56B5CLJ/+Ya8SLgfqVwwoK8FgoqDzEF3nbhf/WCUyph+gHdP3 D+jMk7t0tvIW8Ne4TGXenoxBznZxgh5ObpLlKBKPCGJkKxpfuq9koH33MmY/WoUN 7uh3F3HI2sGr7tY/xaN8H7a9A4mHzipj8nqaAsjAJppIpioecGCFVtkY5q0jfxLC aAc1o4zoimdPs9q9mu/qhgKNxWkoTYnwvtWHuwqEOggvSb1ulS1SPS24VkKrc4LI XMGbA4mQOuFwZyG4FVfvWzbnhsHzDh4cgHaVGra6z5zoX1MUrvieCWEji+Ul1VWa lUJ2sTilvSGkwjGcMUSki5p9GcU8dPXwqKiZqDuGx6Ps4aQsw0vz286BnBeVsusG qLRH4nkqbF9xCEz9h71mcU6WMu17EsG9zMoCg5K4EZ+RIG3cgWq0dMWW1LqtRn7S 2YqayY3+UEyMPN146R1V =q3Ix -----END PGP SIGNATURE----- Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Olof Johansson: "Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch of smaller changes, but also some new platforms that are worth mentioning: - Rockchip RK3399 platforms for Chromebooks, including Samsung Chromebook Plus (Kevin) - Orange Pi PC2 (Allwinner H5) - Freescale LS2088A and LS1088A SoCs - Expanded support for Nvidia Tegra186 (and Jetson TX2)" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (180 commits) arm64: dts: Add basic DT to support Spreadtrum's SP9860G arm64: dts: exynos: Use - instead of @ for DT OPP entries arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board arm64: dts: juno: add information about L1 and L2 caches arm64: dts: juno: fix few unit address format warnings arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB arm64: marvell: dts: add crypto engine description for 7k/8k arm64: dts: marvell: add sdhci support for Armada 7K/8K arm64: dts: marvell: add eMMC support for Armada 37xx arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board arm64: dts: hisi: add SAS nodes for the hip07 SoC arm64: dts: hisi: add RoCE nodes for the hip07 SoC arm64: dts: hisi: add network related nodes for the hip07 SoC arm64: dts: hisi: add mbigen nodes for the hip07 SoC arm64: dts: rockchip: fix the memory size of PX5 Evaluation board arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board ... |
||
Linus Torvalds
|
0160e00ae8 |
ARM: SoC driver updates
Driver updates for ARM SoCs. * Reset subsystem, merged through arm-soc by tradition: - Make bool drivers explicitly non-modular - New support for i.MX7 and Arria10 reset controllers * PATA driver for Palmchip BK371 (acked by Tejun) * Power domain drivers for i.MX (GPC, GPCv2) - Moved out of mach-imx for GPC - Bunch of tweaks, fixes, etc * PMC support for Tegra186 * SoC detection support for Renesas RZ/G1H and RZ/G1N * Move Tegra flow controller driver from mach directory to drivers/soc - (Power management / CPU power driver) * Misc smaller tweaks for other platforms -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZEAZuAAoJEIwa5zzehBx3jCEP/1dcXY746rQoOMUDPyWF5+SZ w0l8dHUQhu4WjNGryfb9DbyiE3d6xlvPVzr9AJeAg6c5I+iikgeogS0XHNpWCU96 FR1Ftb6zo8DIaGognBL9bK5HM7NXjd/EKBkMk0Ggs9/NRFUnakkbpdfivsl2BACx mCGo15+kbgQSQsMJtd5/KfsgY5h7lXJG0fZ8LV5E1E5BSa/AofZtKVgCKfhbd0zV gQqm7xfxtURHtucc7MYNEoKNk5rlrZhOlG6DdG0d6+rscCBrmL1I5giqm8y24+wW z+JJuk21+oVtltLz09JuX51xur3CGyJ+qNJdRPE1P1Udn7wj5zA+ew9qqJi1cgNf 63tBxooBpH6R8dGcOfjKECD6lBBqBr/Dd8ReWbMyn0XF1HMAxgpfPtExu9WcDzGu 9Fr/shUiEA3jqhbzSy6DCHugpnHPdHPyY64MqzisgOEVsituQ7MSefTIGSNusDlk K36I7j93mDAF5y2fTXqbjZKoRuu6KCySvGDXzBqGwhcNzUQk14iPwjtMDZ/l9Raj sQJCUxHntUovHs+VTCwS7ahqZyn0VRNx2bt1aJXNHKzuUovpA9/X5X9HCRZJDovB 0bCGQZ124+H/VsWvSjVtIh7oknU3vSQJPxS6KLKoi3rvywuqW562lGjCTqvjBJKD FMZ5NA8VoWXM2rgTDOyx =B43K -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs: Reset subsystem, merged through arm-soc by tradition: - Make bool drivers explicitly non-modular - New support for i.MX7 and Arria10 reset controllers PATA driver for Palmchip BK371 (acked by Tejun) Power domain drivers for i.MX (GPC, GPCv2) - Moved out of mach-imx for GPC - Bunch of tweaks, fixes, etc PMC support for Tegra186 SoC detection support for Renesas RZ/G1H and RZ/G1N Move Tegra flow controller driver from mach directory to drivers/soc - (Power management / CPU power driver) Misc smaller tweaks for other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) soc: pm-domain: Fix the mangled urls soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0 soc: renesas: rcar-sysc: Add support for fixing up power area tables soc: renesas: Register SoC device early soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible soc: imx: gpc: add defines for domain index soc: imx: Add GPCv2 power gating driver dt-bindings: Add GPCv2 power gating driver ARM/clk: move the ICST library to drivers/clk ARM: plat-versatile: remove stale clock header ARM: keystone: Drop PM domain support for k2g soc: ti: Add ti_sci_pm_domains driver dt-bindings: Add TI SCI PM Domains PM / Domains: Do not check if simple providers have phandle cells PM / Domains: Add generic data pointer to genpd data struct soc/tegra: Add initial flowctrl support for Tegra132/210 soc/tegra: flowctrl: Add basic platform driver soc/tegra: Move Tegra flowctrl driver ARM: tegra: Remove unnecessary inclusion of flowctrl header ... |
||
Linus Torvalds
|
c81ee18e97 |
ARM: SoC defconfig updates
We've traditionally kept defconfig updates in a separate branch, often to encourage submaintainers to handle those patches separately to avoid conflicts on the shared files. The amount of changes seem to be decreasing though, so we might rethink how we handle this going forward. There really isn't much to write about here. The bulk of changes here are enabling drivers for whatever platforms the hardware is found on (and multi-configs). -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZEAvEAAoJEIwa5zzehBx3ylQP+wXFWq5fLlBmjaI5wKRYXOJT Vx+gIibklAGhZmYQavezAXOUNqLJ/hf1RCwUtbfPdtafvO4qkgsuqvbcN/+ZD+cE knaQkGSqVqWzfCBCK/FYu8f433TmuUDvK8AOUn5E13fXvxoZ+V7U6Xu1MehgVR3N jLrkRH1v9kAaIcOYzpYkp3qiNqkYfMKSxwLAo+fYmv3Jm5CAiBuLYlQdILTfsEPT gdbMrs+0W3Hh5IpiQU7z55DuGGb55+R7iPmCfgy75lXXW9JEG0JoM3ji9XDqxmYu Z1l94NNkkKU1AiMSG1uigrhMBjcb1d8sqEJRJCT0bWrojVQBVvjIrK/d3MDUM30o hFHxjF8kJ210MyGeC8TOc3XoENN6YJN7gIq3WBeYmFy6yKReX1ZBdCLniw5MP8Ej FpcOyG0BLpDQdP7A6lIdBwFPFUtHfet3ILggz+JvzyzyD8Gv8iqGHVvwogfHrHhD cI4qQt2qIefmbk6G4iykIBCnl7b9tZ2nC5sHRNorLgtHRTXK9ZFhfMrarXMkxa6m GFoe3wXYzfTWWPLfmJmB/psaZG+gQoOFxt/HjT5ig7fIo3laLONZCPz1wPckyzCb pGiq9p/D9xs1biG2lLxOvR0RCHPo5eyXTshha4TWbG4xVCAG6KlROg24yGvWKIZV 513iQNKAVb/VEv6nbqFl =HXd+ -----END PGP SIGNATURE----- Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM: SoC defconfig updates from Olof Johansson: "We've traditionally kept defconfig updates in a separate branch, often to encourage submaintainers to handle those patches separately to avoid conflicts on the shared files. The amount of changes seem to be decreasing though, so we might rethink how we handle this going forward. There really isn't much to write about here. The bulk of changes here are enabling drivers for whatever platforms the hardware is found on (and multi-configs)" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits) multi_v7_defconfig: make Rockchip usb2-phy built-in ARM: omap2plus_defconfig: Enable droid 4 devices ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules ARM: configs: aspeed: Add new drivers ARM: configs: aspeed: Update configs for BMC systems ARM: omap2plus_defconfig: Enable TI Ethernet PHY ARM: configs: Add new config fragment to change RAM start point ARM: configs: stm32: Add I2C support multi_v7_defconfig: make Rockchip DRM drivers built-in ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max value ARM: imx_v6_v7_defconfig: Select SMSC_PHY ARM: davinci_all_defconfig: convert to use libata PATA ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers ARM: omap2plus_defconfig: enable ahci-dm816 module arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig ARM: bcm2835: Enable missing CMA settings for VC4 driver ARM: socfpga: updates for socfpga_defconfig ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96 ... |
||
Linus Torvalds
|
85d604902e |
ARM: Device-tree updates
Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. Major new platforms: - Gemini has been ported to DT, so a handful of "new" platforms moved over from board files - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288 SoM and RDK - A bunch of embedded platforms, several Linksys platforms, Synology DS116, - Motorola Droid4 (really old OMAP-based phone) support is added. Some refactorings, i.e. Allwinner H3/H5 support is commonalized. And lots of smaller changes, cleanups, etc. See shortlog for more description We're adding ability to cross-include DT files between arm and arm64, by creating appropriate links in the dt-include directory, and using arm/ and arm64/ as include prefixes. This will avoid other local hacks such as per-file links between the two arch trees (this broke for external mirroring of DT contents). Now they can just provide their own appropriate dt-include hierarcy per platform. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZEAoxAAoJEIwa5zzehBx3li8P/iIMy0HmGuJ0JsTldMk4kgkM 1Ci/gcgKYn43m68RwvZCwkBxVibqCdMbBtLHCUt3ScGIYdj6mUG8axRHvFW/tsGf BP0Y5pxm7l1BlHOKed97bJUeMyqqG13szzS7aB5L6cyZt41lAAkpCx4OFAuIlaxo XM1v2xRSxqSf/zp4px83qX2hdHIpe4ZGlDiNh8rCBBnKMY4PqhK0V7TFLPOKbFnr stIvD1TpvzacN67JVo1En0rCFgXSCwJ+CTumAOIx4tflV48ymY5THRNtI1ogFosc 1IfOxnC9DyRVM2ubFF7/ZLFbmn5KHu6ZwPLN+8Wl2McbT96PAtJ3h/zgTnuk4Tvf GaAfqcyAXFeiZGU+bkkGiaQwXRDBroxVuNFTgERNgF70GUrDpBzd3tJO2rx7oZCS Rj2QvKfBDBr9g5ldVGjOBIq/G9DeN5TtR6gyr/hCS/nm0NlYQ90Pzing0Nj8PDC9 /AOa4k4wUWo/oaFucBEeATCxto3TKpmBuP1I31sWG8StKVSJbIek2dSMcWSVFrG5 6/pzmuE4C7ZlshcFAUOeHxMVjBhTya5mDZQgZhCAnwhVMzrrpMTHTi27nbWcv/k8 9TH+ig5DoKL65FFE92ZkEb4S47SaD2+qKjEzJMDNQzc5WuY4l7pfDQoSn3YLjzKZ xSKQEsmyOW0/0v8ecDKP =v6w6 -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. Major new platforms: - Gemini has been ported to DT, so a handful of "new" platforms moved over from board files - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288 SoM and RDK - A bunch of embedded platforms, several Linksys platforms, Synology DS116, - Motorola Droid4 (really old OMAP-based phone) support is added. Some refactorings, i.e. Allwinner H3/H5 support is commonalized. And lots of smaller changes, cleanups, etc. See shortlog for more description We're adding ability to cross-include DT files between arm and arm64, by creating appropriate links in the dt-include directory, and using arm/ and arm64/ as include prefixes. This will avoid other local hacks such as per-file links between the two arch trees (this broke for external mirroring of DT contents). Now they can just provide their own appropriate dt-include hierarcy per platform" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits) ARM: dts: exynos: Use - instead of @ for DT OPP entries arm: spear6xx: add DT description of the ADC on SPEAr600 arm: spear6xx: remove unneeded pinctrl properties in spear600-evb arm: spear6xx: switch spear600-evb to the new flash partition DT binding arm: spear6xx: fix spaces in spear600-evb.dts arm: spear6xx: use node labels in spear600-evb.dts arm: spear6xx: add labels to various nodes in spear600.dtsi ARM: dts: vexpress: fix few unit address format warnings ARM: dts: at91: sama5d3_xplained: not all ADC channels are available ARM: dts: at91: sama5d3_xplained: fix ADC vref ARM: dts: at91: add envelope detector mux to the Axentia TSE-850 ARM: dts: armada-38x: label USB and SATA nodes ARM: dts: imx6q-utilite-pro: add hpd gpio ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply ARM: dts: imx6qdl-sabresd: Set LDO regulator supply ARM: dts: imx: add Gateworks Ventana GW5903 support ARM: dts: i.MX25: add AIPS control registers ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators ARM: dts: imx7-colibri: remove 1.8V fixed regulator ARM: dts: imx7-colibri: allow to disable Ethernet rail ... |
||
Linus Torvalds
|
8d648aad05 |
ARM: SoC platform updates
SoC platform changes (arch/arm/mach-*). This merge window, the bulk is for a few platforms: * Gemini: - Legacy platform that Linus Walleij has converted to multiplatform and DT, so a handful of various tweaks there, removal of some old stale support, etc. * Atmel AT91: - Fixup of various power management related pieces - Move of SoC detection to a drivers/soc driver instead * ST Micro STM32: - New SoC support: STM32H743 * TI platforms: - More driver support for Davinci (SATA in particular) - Removal of some old stale hwmod files (linkspace platform) * Misc: - A couple of smaller patches for i.MX, sunxi, hisi -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZEANUAAoJEIwa5zzehBx3XS8P/0qIIbAW2UvPMTN7ONVAarQL Ri+ZfmxxUmgWBkXEV6XICrwGwwH8l87o8+TLvQZbPmSnZa9gxT8/OF8smQhYhGqr 5hpmRpg2yhssLgxMaL9YQtwl7Au/EvYHgvVPaE6UxI/DEN1QzDiI4x0gsEu5f4oz 3cLh1JqFnP5X0j0wdtsn4B21dQGbqQsUVbqysq48NYHuDOlbwfUj2f8y8TMmCVBP gn736jHUxinQd4vDUFiSmVflNPS2ApaIaVs1KTedmkFA3yZMJUNVp6QqDc+Xpk8l tIMcrSdATckgIIgbs2bCBQr4Ji4jkyWnlR1rqsg1GKCP+OQdnnTyEEzWOwW2KXRF faSr+CKB9mM79TZkRdjV494uwbc8Xg+JnfTHLAaO8fmMmNE8z5pnTNw2RBnS6BIk wpgUVEcCJWEzUodNhuByB328qUXhQ716N3jYb+IN9vEv1MbjuGpsH/DC9EkMv0+k cLuhiNmLVbIfHX3u6xTsqtVWjipV0D0cb7WI1a4SZHx/hTmlKc7Q4/wQXH1IykDA Y/36NG+jxIjx7a3sFc59LoIvuZOkuGf3EaSSxsrbt3/mFdKXjdq0vNCiluVpSakZ 2rzzKePktKr//PxYVB7tvpSs9f/IBpsiy47NDxVvH2DvtohfhEnVxTIKZQiA01U4 sjVToA5ovDHJAne9sIAB =ZdtJ -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is for a few platforms: Gemini: - Legacy platform that Linus Walleij has converted to multiplatform and DT, so a handful of various tweaks there, removal of some old stale support, etc. Atmel AT91: - Fixup of various power management related pieces - Move of SoC detection to a drivers/soc driver instead ST Micro STM32: - New SoC support: STM32H743 TI platforms: - More driver support for Davinci (SATA in particular) - Removal of some old stale hwmod files (linkspace platform) Misc: - A couple of smaller patches for i.MX, sunxi, hisi" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) ARM: davinci: Add clock for CPPI 4.1 DMA engine ARM: mxs: add support for I2SE Duckbill 2 boards MAINTAINERS: Update the Allwinner sunXi entry ARM: i.MX25: globally disable supervisor protect ARM: at91: move SoC detection to its own driver ARM: at91: pm: correct typo ARM: at91: pm: Remove at91_pm_set_standby ARM: at91: pm: Merge all at91sam9*_pm_init ARM: at91: pm: Tie the USB clock mask to the pmc ARM: at91: pm: Tie the memory controller type to the ramc id ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories. ARM: at91: pm: Simplify at91rm9200_standby ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S ARM: at91: pm: Move global variables into at91_pm_data ARM: at91: pm: Move at91_ramc_read/write to pm.c ARM: at91: pm: Cleanup headers MAINTAINERS: Add memory drivers to AT91 entry MAINTAINERS: Update AT91 entry ARM: davinci: add pata_bk3710 libata driver support ARM: OMAP2+: mark omap_init_rng as __init ... |
||
John Crispin
|
7e6c7fe95e |
arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi
We need to tell the driver what the timers frequency is and that the core has not be configured by the bootrom. Not doing so makes the unit not boot. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
Linus Torvalds
|
e07e368b27 |
ARM: SoC non-urgent fixes for merge window
Smaller patches that didn't seem to find a home in other branches, and low-priority fixes from late in the merge window. A number of these are MAINTAINER updates, it seems. Highlights: * Maintainers: - Remove Alexandre Courbot and Stephen Warren from Tegra maintainership, add Jon Hunter - Remove Stephen Warren and add Stefan Wahren to bcm2835 - Tweaks for file flagging for Marvell Dove * Fixes: - For two non-common-clk platform, handle clk_disable with NULL arg - Remove redundant Kconfig select for Oxnas -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZD/3MAAoJEIwa5zzehBx3Ax4QAJpL/EnMWr7KHstYAkUwjPfz 6KJTexUKEvGJqwm99HLT/iMbcTZPVHl4oJd8+bcocLkmrMXeFj/UHZL7YkxZZczt t2JuYTG8rtmKAnck0dJocUV8fCM89CNNQXd5C+GgqX9UEXJCDSq3P6MGdqv2QJ3f eW35aOI0cwvoHvR+3YUrxd0AVp6zb/+Ok+F2udkJRM8uO2la3FO6nMyFe+RgZf/m ZvA1n2p++oINDZrGHz3jj6zU5ow45E4bi94scNrDJOeFox75pRQgQCeINxt8bwHE o1cdrP6uIsJweLJb+YZFy3Bvm3Xd2JmEzlqqq8O0tk29nw48Bnmlv+lHLfzSCsXy pjCKEyhGx16ywDhgaZo7G/zKD8iT1MWaVbcOIfuk8Y8hf5KWVOSOaKhW5DHIBpaP 5CyKzn4rISL3h/eNw/xW182PpXVfb/7dC9ab6CBDbSAW32MWsO9rt5NB1gwrDYE8 C/IT9NK+fdoKj9ZyEqPtogpO0R9xxgPq9XELBlNgtMhTpgWFvrrdtVTPt+LD7Ixd MqJFc+09E4gCPuBy/QfS+51TpZ90RFKZ44M+nrzGHnajpX4bVGAlnvOkf9lLi0Z9 /yd6XcXX10w/iy+yQNpSiplNm2Lglw7fk8A8FCO4YMAlzXsWHvFxj1f1gqFh0oc4 vDdSrf2iZ1Zu6rZ5pzAW =Wg3V -----END PGP SIGNATURE----- Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull misc ARM SoC fixes from Olof Johansson: "ARM SoC non-urgent fixes for merge window Smaller patches that didn't seem to find a home in other branches, and low-priority fixes from late in the merge window. A number of these are MAINTAINER updates, it seems. Highlights: * Maintainers: - Remove Alexandre Courbot and Stephen Warren from Tegra maintainership, add Jon Hunter - Remove Stephen Warren and add Stefan Wahren to bcm2835 - Tweaks for file flagging for Marvell Dove * Fixes: - For two non-common-clk platform, handle clk_disable with NULL arg - Remove redundant Kconfig select for Oxnas" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mmp: let clk_disable() return immediately if clk is NULL ARM: w90x900: let clk_disable() return immediately if clk is NULL MAINTAINERS: Add file patterns for dove device tree bindings ARM: oxnas: remove redundant select CPU_V6K MAINTAINERS: tegra: Remove self as maintainer MAINTAINERS: tegra: Replace Stephen with Jon MAINTAINERS: Add Stefan Wahren to bcm2835. MAINTAINERS: remove swarren from bcm2835 MAINTAINERS: Add Jon Mason to BCM5301X maintainers |
||
Paolo Bonzini
|
36c344f3f1 |
Second round of KVM/ARM Changes for v4.12.
Changes include: - A fix related to the 32-bit idmap stub - A fix to the bitmask used to deode the operands of an AArch32 CP instruction - We have moved the files shared between arch/arm/kvm and arch/arm64/kvm to virt/kvm/arm - We add support for saving/restoring the virtual ITS state to userspace -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJZEZihAAoJEEtpOizt6ddyGDYH/jmGjDMnryORn2P2o10dUQKJ RnHTQYnpOYqnprlkFtZFpmK+mjl/a8R1Btb7GK2EwmovTR95pMYPRqtrCTOL0aQA 4OToh7+vFGatwxsGCS6utazdhmx0UT/LhO/GEF4G1zOb7eVa4ZtS1NKLP2WjPD1E RU3Qn8wa0pESv3tJScv8qo2+PWVX4krbFllhY2Hk0AkVQcI66ExkdVq4ikm1eUXn rxzIayLG2bv3KEPNCzozdwoY9tDL+b40q6vN/RHGJmM05SZbbSx2/Bkw2RbslSpD 2hvhHWX7xeuEBcd5mZO7sP4WS3hM/BI8eX7q+uMeNJ9B+nM82yjGfOTtglVi2cc= =JfvQ -----END PGP SIGNATURE----- Merge tag 'kvm-arm-for-v4.12-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD Second round of KVM/ARM Changes for v4.12. Changes include: - A fix related to the 32-bit idmap stub - A fix to the bitmask used to deode the operands of an AArch32 CP instruction - We have moved the files shared between arch/arm/kvm and arch/arm64/kvm to virt/kvm/arm - We add support for saving/restoring the virtual ITS state to userspace |
||
Linus Torvalds
|
857f864014 |
pci-v4.12-changes
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZEHmsAAoJEFmIoMA60/r88SgQAJbFddueb0+DfJ+USDud4b/Z akfS+G1UAm+TgtMyh1wM49dHzFssp36uWJxtWI+bPqBzuy94PMCbz7JVUV28gX9G tFhFuc5YH94I/3y85rbZnolb6uZN9MhLjzTFqDC9ilW6HFqmwK4t4wlHSCjQN1St svLYvs2G6n6/VK3Fre7/wOvdZ1erG4Qod+kn5Tx3K5TQydmRlaSBfK+DRANuDBkM KzGO7Bkc/Cx8hb9pHmaey/wxmNrrgmVjTtWrEnb2tEq833zP4h6GhUIJEKodMSi5 gXPNZgKlu3n5L592M0UCh4EoHejzkv9wrcsoDm+djmsc5Zg2Howq4kAdHP8k4hUG 0gt8n0ni9vhJN56jikrGi7cAdHCKSNnx2Ue/qTCbX0ncB3XUMuJxJwCsgW/6wa9f oU7tRtTS03UltnKoFAcyYclS4TaSY4SA4ySaK6Hi+cRkdVFDdyHQYbHHNSU7MsA+ IS2tXvGoIdSYyrZMHSRcl2rRTfYQUkmPEvBF3LvqZr32M4mJMmUNAPLZaly373ZE iwq0ZJlrLeM0cqdFIG3S60RtJyQk/HBN1NMqrYHArWOxvWIgNd5F8NCsTTxY3wU3 IxgBIuUFcbVwVkqEHGs8K5AvB3oghqdnA3eGOV79799eMtLn3LOvyIlpHMSw9WUq ags00JtMLitfNPBH3eSl =eE4D -----END PGP SIGNATURE----- Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ... |
||
Linus Torvalds
|
bf5f89463f |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: - the rest of MM - various misc things - procfs updates - lib/ updates - checkpatch updates - kdump/kexec updates - add kvmalloc helpers, use them - time helper updates for Y2038 issues. We're almost ready to remove current_fs_time() but that awaits a btrfs merge. - add tracepoints to DAX * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4 selftests/vm: add a test for virtual address range mapping dax: add tracepoint to dax_insert_mapping() dax: add tracepoint to dax_writeback_one() dax: add tracepoints to dax_writeback_mapping_range() dax: add tracepoints to dax_load_hole() dax: add tracepoints to dax_pfn_mkwrite() dax: add tracepoints to dax_iomap_pte_fault() mtd: nand: nandsim: convert to memalloc_noreclaim_*() treewide: convert PF_MEMALLOC manipulations to new helpers mm: introduce memalloc_noreclaim_{save,restore} mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required mm/huge_memory.c: use zap_deposited_table() more time: delete CURRENT_TIME_SEC and CURRENT_TIME gfs2: replace CURRENT_TIME with current_time apparmorfs: replace CURRENT_TIME with current_time() lustre: replace CURRENT_TIME macro fs: ubifs: replace CURRENT_TIME_SEC with current_time fs: ufs: use ktime_get_real_ts64() for birthtime ... |
||
Kees Cook
|
063246641d |
format-security: move static strings to const
While examining output from trial builds with -Wformat-security enabled, many strings were found that should be defined as "const", or as a char array instead of char pointer. This makes some static analysis easier, by producing fewer false positives. As these are all trivial changes, it seemed best to put them all in a single patch rather than chopping them up per maintainer. Link: http://lkml.kernel.org/r/20170405214711.GA5711@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jes Sorensen <jes@trained-monkey.org> [runner.c] Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Jiri Slaby <jslaby@suse.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Florian Westphal <fw@strlen.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kejian Yan <yankejian@huawei.com> Cc: Daode Huang <huangdaode@hisilicon.com> Cc: Qianqian Xie <xieqianqian@huawei.com> Cc: Philippe Reynes <tremyfr@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Christian Gromm <christian.gromm@microchip.com> Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de> Cc: Jason Litzinger <jlitzingerdev@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Laura Abbott
|
e6ccbff0e9 |
treewide: decouple cacheflush.h and set_memory.h
Now that all call sites, completely decouple cacheflush.h and set_memory.h [sfr@canb.auug.org.au: kprobes/x86: merge fix for set_memory.h decoupling] Link: http://lkml.kernel.org/r/20170418180903.10300fd3@canb.auug.org.au Link: http://lkml.kernel.org/r/1488920133-27229-17-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Laura Abbott
|
74d86a7063 |
arm: use set_memory.h header
set_memory_* functions have moved to set_memory.h. Switch to this explicitly Link: http://lkml.kernel.org/r/1488920133-27229-3-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Laura Abbott
|
299878bac3 |
treewide: move set_memory_* functions away from cacheflush.h
Patch series "set_memory_* functions header refactor", v3. The set_memory_* APIs came out of a desire to have a better way to change memory attributes. Many of these attributes were linked to cache functionality so the prototypes were put in cacheflush.h. These days, the APIs have grown and have a much wider use than just cache APIs. To support this growth, split off set_memory_* and friends into a separate header file to avoid growing cacheflush.h for APIs that have nothing to do with caches. Link: http://lkml.kernel.org/r/1488920133-27229-2-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Stephen Boyd
|
ad61dd303a |
scripts/spelling.txt: add regsiter -> register spelling mistake
This typo is quite common. Fix it and add it to the spelling file so that checkpatch catches it earlier. Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
2d3e4866de |
* ARM: HYP mode stub supports kexec/kdump on 32-bit; improved PMU
support; virtual interrupt controller performance improvements; support for userspace virtual interrupt controller (slower, but necessary for KVM on the weird Broadcom SoCs used by the Raspberry Pi 3) * MIPS: basic support for hardware virtualization (ImgTec P5600/P6600/I6400 and Cavium Octeon III) * PPC: in-kernel acceleration for VFIO * s390: support for guests without storage keys; adapter interruption suppression * x86: usual range of nVMX improvements, notably nested EPT support for accessed and dirty bits; emulation of CPL3 CPUID faulting * generic: first part of VCPU thread request API; kvm_stat improvements -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQEcBAABAgAGBQJZEHUkAAoJEL/70l94x66DBeYH/09wrpJ2FjU4Rqv7FxmqgWfH 9WGi4wvn/Z+XzQSyfMJiu2SfZVzU69/Y67OMHudy7vBT6knB+ziM7Ntoiu/hUfbG 0g5KsDX79FW15HuvuuGh9kSjUsj7qsQdyPZwP4FW/6ZoDArV9mibSvdjSmiUSMV/ 2wxaoLzjoShdOuCe9EABaPhKK0XCrOYkygT6Paz1pItDxaSn8iW3ulaCuWMprUfG Niq+dFemK464E4yn6HVD88xg5j2eUM6bfuXB3qR3eTR76mHLgtwejBzZdDjLG9fk 32PNYKhJNomBxHVqtksJ9/7cSR6iNPs7neQ1XHemKWTuYqwYQMlPj1NDy0aslQU= =IsiZ -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM updates from Paolo Bonzini: "ARM: - HYP mode stub supports kexec/kdump on 32-bit - improved PMU support - virtual interrupt controller performance improvements - support for userspace virtual interrupt controller (slower, but necessary for KVM on the weird Broadcom SoCs used by the Raspberry Pi 3) MIPS: - basic support for hardware virtualization (ImgTec P5600/P6600/I6400 and Cavium Octeon III) PPC: - in-kernel acceleration for VFIO s390: - support for guests without storage keys - adapter interruption suppression x86: - usual range of nVMX improvements, notably nested EPT support for accessed and dirty bits - emulation of CPL3 CPUID faulting generic: - first part of VCPU thread request API - kvm_stat improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits) kvm: nVMX: Don't validate disabled secondary controls KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick Revert "KVM: Support vCPU-based gfn->hva cache" tools/kvm: fix top level makefile KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING KVM: Documentation: remove VM mmap documentation kvm: nVMX: Remove superfluous VMX instruction fault checks KVM: x86: fix emulation of RSM and IRET instructions KVM: mark requests that need synchronization KVM: return if kvm_vcpu_wake_up() did wake up the VCPU KVM: add explicit barrier to kvm_vcpu_kick KVM: perform a wake_up in kvm_make_all_cpus_request KVM: mark requests that do not need a wakeup KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up KVM: x86: always use kvm_make_request instead of set_bit KVM: add kvm_{test,clear}_request to replace {test,clear}_bit s390: kvm: Cpu model support for msa6, msa7 and msa8 KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK kvm: better MWAIT emulation for guests KVM: x86: virtualize cpuid faulting ... |
||
Linus Torvalds
|
9c6ee01ed5 |
Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King: "Lots of little things this time: - allow modules to be autoloaded according to the HWCAP feature bits (used primarily for crypto modules) - split module core and init PLT sections, since the core code and init code could be placed far apart, and the PLT sections need to be local to the code block. - three patches from Chris Brandt to allow Cortex-A9 L2 cache optimisations to be disabled where a SoC didn't wire up the out of band signals. - NoMMU compliance fixes, avoiding corruption of vector table which is not being used at this point, and avoiding possible register state corruption when switching mode. - fixmap memory attribute compliance update. - remove unnecessary locking from update_sections_early() - ftrace fix for DEBUG_RODATA with !FRAME_POINTER" * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8672/1: mm: remove tasklist locking from update_sections_early() ARM: 8671/1: V7M: Preserve registers across switch from Thread to Handler mode ARM: 8670/1: V7M: Do not corrupt vector table around v7m_invalidate_l1 call ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap ARM: 8663/1: wire up HWCAP/HWCAP2 feature bits to the CPU modalias ARM: 8666/1: mm: dump: Add domain to output ARM: 8662/1: module: split core and init PLT sections ARM: 8661/1: dts: r7s72100: add l2 cache ARM: 8660/1: shmobile: r7s72100: Enable L2 cache ARM: 8659/1: l2c: allow CA9 optimizations to be disabled |
||
Eric Auger
|
280771252c |
KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES
This patch adds a new attribute to GICV3 KVM device KVM_DEV_ARM_VGIC_GRP_CTRL group. This allows userspace to flush all GICR pending tables into guest RAM. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> |
||
Eric Auger
|
3b65808f4b |
KVM: arm64: vgic-its: KVM_DEV_ARM_ITS_SAVE/RESTORE_TABLES
Introduce new attributes in KVM_DEV_ARM_VGIC_GRP_CTRL group: - KVM_DEV_ARM_ITS_SAVE_TABLES: saves the ITS tables into guest RAM - KVM_DEV_ARM_ITS_RESTORE_TABLES: restores them into VGIC internal structures. We hold the vcpus lock during the save and restore to make sure no vcpu is running. At this stage the functionality is not yet implemented. Only the skeleton is put in place. Signed-off-by: Eric Auger <eric.auger@redhat.com> [Given we will move the iodev register until setting the base addr] Reviewed-by: Christoffer Dall <cdall@linaro.org> |