Currently, direct I/O has its own versions of bio_readpage_error() and
btrfs_check_repairable() (dio_read_error() and
btrfs_check_dio_repairable(), respectively). The main difference is that
the direct I/O version doesn't do read validation. The rework of direct
I/O repair makes it possible to do validation, so we can get rid of
btrfs_check_dio_repairable() and combine bio_readpage_error() and
dio_read_error() into a new helper, btrfs_submit_read_repair().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was originally added in commit 8b110e393c ("Btrfs: implement
repair function when direct read fails") to avoid a deadlock. In that
commit, the direct I/O read endio executes on the endio_workers
workqueue, submits a repair bio, and waits for it to complete. The
repair bio endio must execute on a different workqueue, otherwise it
could block on the endio_workers workqueue becoming available, which
won't happen because the original endio is blocked on the repair bio.
As of the previous commit, the original endio doesn't wait for the
repair bio, so this separate workqueue is unnecessary.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Direct I/O read repair was originally implemented in commit 8b110e393c
("Btrfs: implement repair function when direct read fails"). This
implementation is unnecessarily complicated. There is major code
duplication between __btrfs_subio_endio_read() (checks checksums and
handles I/O errors for files with checksums),
__btrfs_correct_data_nocsum() (handles I/O errors for files without
checksums), btrfs_retry_endio() (checks checksums and handles I/O errors
for retries of files with checksums), and btrfs_retry_endio_nocsum()
(handles I/O errors for retries of files without checksum). If it sounds
like these should be one function, that's because they should.
Additionally, these functions are very hard to follow due to their
excessive use of goto.
This commit replaces the original implementation. After the previous
commit getting rid of orig_bio, we can reuse the same endio callback for
repair I/O and the original I/O, we just need to track the file offset
and original iterator in the repair bio. We can also unify the handling
of files with and without checksums and simplify the control flow. We
also no longer have to wait for each repair I/O to complete one by one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the worst case, there are _4_ layers of bios in the Btrfs direct I/O
path:
1. The bio created by the generic direct I/O code (dio_bio).
2. A clone of dio_bio we create in btrfs_submit_direct() to represent
the entire direct I/O range (orig_bio).
3. A partial clone of orig_bio limited to the size of a RAID stripe that
we create in btrfs_submit_direct_hook().
4. Clones of each of those split bios for each RAID stripe that we
create in btrfs_map_bio().
As of the previous commit, the second layer (orig_bio) is no longer
needed for anything: we can split dio_bio instead, and complete dio_bio
directly when all of the cloned bios complete. This lets us clean up a
bunch of cruft, including dip->subio_endio and dip->errors (we can use
dio_bio->bi_status instead). It also enables the next big cleanup of
direct I/O read repair.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The next commit will get rid of btrfs_dio_private->orig_bio. The only
thing we really need it for is containing all of the checksums, but we
can easily put the checksum array in btrfs_dio_private and have the
submitted bios reference the array. We can also look the checksums up
while we're setting up instead of the current awkward logic that looks
them up for orig_bio when the first split bio is submitted.
(Interestingly, btrfs_dio_private did contain the
checksums before commit 23ea8e5a07 ("Btrfs: load checksum data once
when submitting a direct read io"), but it didn't look them up up
front.)
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is really a reference count now, so convert it to refcount_t and
rename it to refs.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We haven't used this since commit 9be3395bcd ("Btrfs: use a btrfs
bioset instead of abusing bio internals").
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since its introduction in commit 2fe6303e7c ("Btrfs: split
bio_readpage_error into several functions"), btrfs_check_repairable()
has only been used from extent_io.c where it is defined.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__readpage_endio_check() is also used from the direct I/O read code, so
give it a more descriptive name.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix a couple of issues in the btrfs_lookup_bio_sums documentation:
* The bio doesn't need to be a btrfs_io_bio if dst was provided. Move
the declaration in the code to make that clear, too.
* dst must be large enough to hold nblocks * csum_size, not just
csum_size.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The purpose of the validation step is to distinguish between good and
bad sectors in a failed multi-sector read. If a multi-sector read
succeeded but some of those sectors had checksum errors, we don't need
to validate anything; we know the sectors with bad checksums need to be
repaired.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Read repair does two things: it finds a good copy of data to return to
the reader, and it corrects the bad copy on disk. If a read of multiple
sectors has an I/O error, repair does an extra "validation" step that
issues a separate read for each sector. This allows us to find the exact
failing sectors and only rewrite those.
This heuristic is implemented in
bio_readpage_error()/btrfs_check_repairable() as:
failed_bio_pages = failed_bio->bi_iter.bi_size >> PAGE_SHIFT;
if (failed_bio_pages > 1)
do validation
However, at this point, bi_iter may have already been advanced. This
means that we'll skip the validation step and rewrite the entire failed
read.
Fix it by getting the actual size from the biovec (which we can do
because this is only called for non-cloned bios, although that will
change in a later commit).
Fixes: 8a2ee44a37 ("btrfs: look at bi_size for repair decisions")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_submit_direct(), if we fail to allocate the btrfs_dio_private,
we complete the ordered extent range. However, we don't mark that the
range doesn't need to be cleaned up from btrfs_direct_IO() until later.
Therefore, if we fail to allocate the btrfs_dio_private, we complete the
ordered extent range twice. We could fix this by updating
unsubmitted_oe_range earlier, but it's cleaner to reorganize the code so
that creating the btrfs_dio_private and submitting the bios are
separate, and once the btrfs_dio_private is created, cleanup always
happens through the btrfs_dio_private.
The logic around unsubmitted_oe_range_end and unsubmitted_oe_range_start
is really subtle. We have the following:
1. btrfs_direct_IO sets those two to the same value.
2. When we call __blockdev_direct_IO unless
btrfs_get_blocks_direct->btrfs_get_blocks_direct_write is called to
modify unsubmitted_oe_range_start so that start < end. Cleanup
won't happen.
3. We come into btrfs_submit_direct - if it dip allocation fails we'd
return with oe_range_end now modified so cleanup will happen.
4. If we manage to allocate the dip we reset the unsubmitted range
members to be equal so that cleanup happens from
btrfs_endio_direct_write.
This 4-step logic is not really obvious, especially given it's scattered
across 3 functions.
Fixes: f28a492878 ("Btrfs: fix leaking of ordered extents after direct IO write error")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
[ add range start/end logic explanation from Nikolay ]
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_submit_direct_hook(), if a direct I/O write doesn't span a RAID
stripe or chunk, we submit orig_bio without cloning it. In this case, we
don't increment pending_bios. Then, if btrfs_submit_dio_bio() fails, we
decrement pending_bios to -1, and we never complete orig_bio. Fix it by
initializing pending_bios to 1 instead of incrementing later.
Fixing this exposes another bug: we put orig_bio prematurely and then
put it again from end_io. Fix it by not putting orig_bio.
After this change, pending_bios is really more of a reference count, but
I'll leave that cleanup separate to keep the fix small.
Fixes: e65e153554 ("btrfs: fix panic caused by direct IO")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
An upcoming Btrfs fix needs to know the original size of a non-cloned
bios. Rather than accessing the bvec table directly, let's add a
bio_for_each_bvec_all() accessor.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At clean_pinned_extents(), whether we end up returning success or failure,
we pretty much have to do the same things:
1) unlock unused_bg_unpin_mutex
2) decrement reference count on the previous transaction
We also call btrfs_dec_block_group_ro() in case of failure, but that is
better done in its caller, btrfs_delete_unused_bgs(), since its the
caller that calls inc_block_group_ro(), so it should be responsible for
the decrement operation, as it is in case any of the other functions it
calls fail.
So move the call to btrfs_dec_block_group_ro() from clean_pinned_extents()
into btrfs_delete_unused_bgs() and unify the error and success return
paths for clean_pinned_extents(), reducing duplicated code and making it
simpler.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass the eb::level so we can get read it directly inside the
btrfs_bin_search and key_search.
This is inspired by the work of Marek in U-boot.
CC: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of returning both the page and the super block structure, make
btrfs_read_disk_super just return a pointer to struct btrfs_disk_super.
As a result the function signature is simplified. Also,
read_cache_page_gfp can never return NULL so check its return value only
for IS_ERR.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function always works on a local copy of the reloc root list, which
cannot be modified outside of it so using list_for_each_entry is fine.
Additionally the macro handles empty lists so drop list_empty checks of
callers. No semantic changes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Deleting a subvolume on a full filesystem leads to ENOSPC followed by a
forced read-only. This is not a transaction abort and the filesystem is
otherwise ok, so the error should be just propagated to the callers.
This is caused by unnecessary call to btrfs_handle_fs_error for all
errors, except EAGAIN. This does not make sense as the standard
transaction abort mechanism is in btrfs_drop_snapshot so all relevant
failures are handled.
Originally in commit cb1b69f450 ("Btrfs: forced readonly when
btrfs_drop_snapshot() fails") there was no return value at all, so the
btrfs_std_error made some sense but once the error handling and
propagation has been implemented we don't need it anymore.
Signed-off-by: David Sterba <dsterba@suse.com>
The reclaim_size counter of a space_info object is unsigned. So its value
can never be negative, it's pointless to have an assertion that checks
its value is >= 0, therefore remove it.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove the duplicate definition of 'inode_item_err' in the file
tree-checker.c that got there by accident in c23c77b097 ("btrfs:
tree-checker: Refactor inode key check into seperate function").
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Zheng Wei <wei.zheng@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay noticed a bunch of test failures with my global rsv steal
patches. At first he thought they were introduced by them, but they've
been failing for a while with 64k nodes.
The problem is with 64k nodes we have a global reserve that calculates
out to 13MiB on a freshly made file system, which only has 8MiB of
metadata space. Because of changes I previously made we no longer
account for the global reserve in the overcommit logic, which means we
correctly allow overcommit to happen even though we are already
overcommitted.
However in some corner cases, for example btrfs/170, we will allocate
the entire file system up with data chunks before we have enough space
pressure to allocate a metadata chunk. Then once the fs is full we
ENOSPC out because we cannot overcommit and the global reserve is taking
up all of the available space.
The most ideal way to deal with this is to change our space reservation
stuff to take into account the height of the tree's that we're
modifying, so that our global reserve calculation does not end up so
obscenely large.
However that is a huge undertaking. Instead fix this by forcing a chunk
allocation if the global reserve is larger than the total metadata
space. This gives us essentially the same behavior that happened
before, we get a chunk allocated and these tests can pass.
This is meant to be a stop-gap measure until we can tackle the "tree
height only" project.
Fixes: 0096420adb ("btrfs: do not account global reserve in can_overcommit")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With normal tickets we could have a large reservation at the front of
the list that is unable to be satisfied, but a smaller ticket later on
that can be satisfied. The way we handle this is to run
btrfs_try_granting_tickets() in maybe_fail_all_tickets().
However no such protection exists for priority tickets. Fix this by
handling it in handle_reserve_ticket(). If we've returned after
attempting to flush space in a priority related way, we'll still be on
the priority list and need to be removed.
We rely on the flushing to free up space and wake the ticket, but if
there is not enough space to reclaim _but_ there's enough space in the
space_info to handle subsequent reservations then we would have gotten
an ENOSPC erroneously.
Address this by catching where we are still on the list, meaning we were
a priority ticket, and removing ourselves and then running
btrfs_try_granting_tickets(). This will handle this particular corner
case.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In debugging a generic/320 failure on ppc64, Nikolay noticed that
sometimes we'd ENOSPC out with plenty of space to reclaim if we had
committed the transaction. He further discovered that this was because
there was a priority ticket that was small enough to fit in the free
space currently in the space_info.
Consider the following scenario. There is no more space to reclaim in
the fs without committing the transaction. Assume there's 1MiB of space
free in the space info, but there are pending normal tickets with 2MiB
reservations.
Now a priority ticket comes in with a .5MiB reservation. Because we
have normal tickets pending we add ourselves to the priority list,
despite the fact that we could satisfy this reservation.
The flushing machinery now gets to the point where it wants to commit
the transaction, but because there's a .5MiB ticket on the priority list
and we have 1MiB of free space we assume the ticket will be granted
soon, so we bail without committing the transaction.
Meanwhile the priority flushing does not commit the transaction, and
eventually fails with an ENOSPC. Then all other tickets are failed with
ENOSPC because we were never able to actually commit the transaction.
The fix for this is we should have simply granted the priority flusher
his reservation, because there was space to make the reservation.
Priority flushers by definition take priority, so they are allowed to
make their reservations before any previous normal tickets. By not
adding this priority ticket to the list the normal flushing mechanisms
will then commit the transaction and everything will continue normally.
We still need to serialize ourselves with other priority tickets, so if
there are any tickets on the priority list then we need to add ourselves
to that list in order to maintain the serialization between priority
tickets.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On ppc64le with 64k page size (respectively 64k block size) generic/320
was failing and debug output showed we were getting a premature ENOSPC
with a bunch of space in btrfs_fs_info::trans_block_rsv.
This meant there were still open transaction handles holding space, yet
the flusher didn't commit the transaction because it deemed the freed
space won't be enough to satisfy the current reserve ticket. Fix this
by accounting for space in trans_block_rsv when deciding whether the
current transaction should be committed or not.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We previously had a limit of stealing 50% of the global reserve for
unlink. This was from a time when the global reserve was used for the
delayed refs as well. However now those reservations are kept separate,
so the global reserve can be depleted much more to allow us to make
progress for space restoring operations like unlink. Change the minimum
amount of space required to be left in the global reserve to 10%.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For unlink transactions and block group removal
btrfs_start_transaction_fallback_global_rsv will first try to start an
ordinary transaction and if it fails it will fall back to reserving the
required amount by stealing from the global reserve. This is problematic
because of all the same reasons we had with previous iterations of the
ENOSPC handling, thundering herd. We get a bunch of failures all at
once, everybody tries to allocate from the global reserve, some win and
some lose, we get an ENSOPC.
Fix this behavior by introducing BTRFS_RESERVE_FLUSH_ALL_STEAL. It's
used to mark unlink reservation. To fix this we need to integrate this
logic into the normal ENOSPC infrastructure. We still go through all of
the normal flushing work, and at the moment we begin to fail all the
tickets we try to satisfy any tickets that are allowed to steal by
stealing from the global reserve. If this works we start the flushing
system over again just like we would with a normal ticket satisfaction.
This serializes our global reserve stealing, so we don't have the
thundering herd problem.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For relocation tree detection, relocation backref cache uses
btrfs_should_ignore_reloc_root() which uses relocation-specific checks
like checking the DEAD_RELOC_ROOT bit.
However for general purpose backref cache, we can rely on that check, as
it's possible that relocation is also running.
For generic purposed backref cache, we detect reloc root by
SHARED_BLOCK_REF item. Only reloc root node has its parent bytenr
pointing back to itself.
And in that case, backref cache will mark the reloc root node useless,
dropping any child orphan nodes.
So only call btrfs_should_ignore_reloc_root() if the backref cache is
for relocation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The error cleanup will be extracted as a new function,
btrfs_backref_error_cleanup(), and moved to backref.c and exported for
later usage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This the the 2nd major part of generic backref cache. Move it to
backref.c so we can reuse it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is the major part of backref cache build process, move it
to backref.c so we can reuse it later.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The backref code is going to be moved to backref.c, and read_fs_root()
is just a simple wrapper, open-code it to prepare to the incoming code
move.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is mostly single purpose to relocation backref cache, but
since we're moving the main part of backref cache to backref.c, we need
to export such function.
And to avoid confusion, rename the function to
btrfs_should_ignore_reloc_root() make the name a little more clear.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Also change the parameter, since all callers can easily grab an fs_info,
there is no need for all the pointer chasing.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we're releasing all existing nodes/edges, other than cleanup the
mess after error, "release" is a more proper naming here.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Also add comment explaining the cleanup progress, to differ it from
btrfs_backref_drop_node().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With extra comment for drop_backref_node() as it has some similarity
with remove_backref_node(), thus we need extra comment explaining the
difference.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Structure tree_entry provides a very simple rb_tree which only uses
bytenr as search index.
That tree_entry is used in 3 structures: backref_node, mapping_node and
tree_block.
Since we're going to make backref_node independnt from relocation, it's
a good time to extract the tree_entry into rb_simple_node, and export it
into misc.h.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These 3 structures are the main part of btrfs backref cache, move them
to backref.h to build the basis for later reuse.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Those three structures are the main elements of backref cache. Add the
"btrfs_" prefix for later export.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch will also add some comment for the cleanup.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After handle_one_tree_backref(), all newly added (not cached) edges and
nodes have the following features:
- Only backref_edge::list[LOWER] is linked.
This means, we can only iterate from botton to top, not the other
direction.
- Newly added nodes are not added to cache rb_tree yet
So to finish the backref cache, we still need to finish the links and
add all nodes into backref cache rb_tree.
This patch will refactor the existing code into finish_upper_links(),
add more comments of each branch, and why we need to do all the work.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
build_backref_tree() uses "goto again;" to implement a breadth-first
search to build backref cache.
This patch will extract most of its work into a wrapper,
handle_one_tree_block(), and use a do {} while() loop to implement the
same thing.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Bytenr and level are essential parameters for backref_node, thus it
makes sense to initialize them at allocation time.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
