A couple of compat wrapper functions are simply trampolines to the real
system call. This happened because the compat wrapper defines will only
sign and zero extend system call parameters which are of different size
on s390/s390x (longs and pointers).
All other parameters will be correctly sign and zero extended by the
normal system call wrappers.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add notrace to the compat wrapper define to disable tracing of compat
wrapper functions. These are supposed to be very small and more or less
just a trampoline to the real system call.
Also fix indentation.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This config option is completely irrelevant for zfcpdump and
unfortunately causes a kernel panic on recent kernels in
"mspro_block_init()/driver_register()".
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The scaled cputime is supposed to be derived from the normal per-thread
cputime by dividing it with the average thread density in the last interval.
The calculation of the scaling values for the average thread density is
incorrect. The current, incorrect calculation:
Ci = cycle count with i active threads
T = unscaled cputime, sT = scaled cputime
sT = T * (C1 + C2 + ... + Cn) / (1*C1 + 2*C2 + ... + n*Cn)
The calculation happens to yield the correct numbers for the simple cases
with only one Ci value not zero. But for cases with multiple Ci values not
zero it fails. E.g. on a SMT-2 system with one thread active half the time
and two threads active for the other half of the time it fails, the scaling
factor should be 3/4 but the formula gives 2/3.
The correct formula is
sT = T * (C1/1 + C2/2 + ... + Cn/n) / (C1 + C2 + ... + Cn)
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Previously, the cpum_cf PMU returned -EPERM if a counter is requested and
the counter set to which the counter belongs is not authorized. According
to the perf_event_open() system call manual, an error code of EPERM indicates
an unsupported exclude setting or CAP_SYS_ADMIN is missing.
Use ENOENT to indicate that particular counters are not available when the
counter set which contains the counter is not authorized. For generic events,
this might trigger a fall back, for example, to a software event.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The uc_sigmask in the ucontext structure is an array of words to keep
the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t
only has 64 bits).
For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit
there are two 4 byte words. The compat signal handler code uses a
simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t.
As s390 is a big-endian architecture this is incorrect, the two words
in the 31 bit sigset_t array need to be swapped.
Cc: <stable@vger.kernel.org>
Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The critical section cleanup code misses to add the offset of the
thread_struct to the task address.
Therefore, if the critical section code gets executed, it may corrupt
the task struct or restore the contents of the floating point registers
from the wrong memory location.
Fixes d0164ee20d "s390/kernel: remove save_fpu_regs() parameter and use
__LC_CURRENT instead".
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The swsusp_arch_suspend()/swsusp_arch_resume() functions currently only
save and restore the floating point registers. If the task that started
the hibernation process is using vector registers they can get lost.
To fix this just call save_fpu_regs in swsusp_arch_suspend(), the restore
will happen automatically on return to user space.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
- Move ehca driver to staging/rdma and schedule for deletion
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4XzR
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma driver move from Doug Ledford:
"This is a move only, no functional changes.
I tried to get it in prior to the rc1 release, but we were waiting on
IBM to get back to us that they were OK with the deprecation and
eventual removal of this driver. That OK didn't materialize until
last week, so integration and testing time pushed us beyond the rc1
release.
Summary:
- Move ehca driver to staging/rdma and schedule for deletion"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/ehca: Deprecate driver, move to staging, schedule deletion
Add support for NCT6793D, and fix swapped registers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/U4E
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Two patches for the nct6775 driver: add support for NCT6793D, and fix
swapped registers"
* tag 'hwmon-for-linus-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Add support for NCT6793D
hwmon: (nct6775) Swap STEP_UP_TIME and STEP_DOWN_TIME registers for most chips
- Some IS_ERR() fixes from Julia Lawall. I always wanted the compiler
to catch these but error pointers by nailing them as an err pointer
intrinsic type or something seem to be a "no can do". In any
case, cocinelle is obviously up to the task, better than bugs
staying around.
- Better error handling for NULL GPIO chips.
- Fix a compile error from the big irq desc refactoring. I'm
surprised the fallout wasn't bigger than this.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xpIg
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"This is a first set of pin control fixes for the v4.3 series. Nothing
special to say, business as usual.
- Some IS_ERR() fixes from Julia Lawall. I always wanted the
compiler to catch these but error pointers by nailing them as an
err pointer intrinsic type or something seem to be a "no can do".
In any case, cocinelle is obviously up to the task, better than
bugs staying around.
- Better error handling for NULL GPIO chips.
- Fix a compile error from the big irq desc refactoring. I'm
surprised the fallout wasn't bigger than this"
* tag 'pinctrl-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: samsung: s3c24xx: fix syntax error
pinctrl: core: Warn about NULL gpio_chip in pinctrl_ready_for_gpio_range()
pinctrl: join lines that can be a single line within 80 columns
pinctrl: digicolor: convert null test to IS_ERR test
pinctrl: qcom: ssbi: convert null test to IS_ERR test
- Return value checks and thus nicer errorpath for two drivers.
- Make GPIO_RCAR arch neutral.
- Propagate errors from GPIO chip ->get() vtable call. It turned
out these can actually fail sometimes, especially on slowpath
controllers doing I2C traffic and similar.
- Update documentation to be in sync with the massive changes in
the v4.3 merge window, phew.
- Handle deferred probe properly in the OMAP driver.
- Get rid of surplus MODULE_ALIAS() from sx150x.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJV+RcuAAoJEEEQszewGV1zMqwQALnqXAvtJGw7CaKOiShm3ywH
JPm4jMh7iiUFI8H+k6TscwxRz7bPKrezsCZleUxz/BOu/sAA9bVarYU3Fcl5HwZD
0qVszWCQ3E44qMh708F/B2kuQWdMl3u0aY9AGcNm0e4uDZ+hxXQ/jw+B1N/W0KFL
vkCCCG/uE5eoRsOkOlEtm0UI+DjHRSpzEkgZ/1HmFfBtZaQuvHOMc5ouzT72hMQn
YOk9lKPqjivGzDZYiISfmb62uuDQ8YnwsWZvP5SEbNdEgSlVes5Njd59pnxJgjYg
tSQO37Sm0kNafbIao71DHrTBWHRxvsNeLuaDRnfNj95W8QtcYjvWrqCd3kBIeAt5
ZgUlm6mKEeZuz2PW+biT4DC7hPpV0LXCwTjjHtJ6S5w7JuM3+2HpHDItbYfs5SiL
40VlXKuLPOlxt6f179+4YTRwtaotQ6Bw0Rcflh5Sa4qq7LmZFghwSwtCDsNsWhWq
qnFRoqbDmcxXBbnOuTvhM4DVCv7bvyQpos3EoFVANGg/T2zJ+8TEfi1ClHd5CbFO
WHbgVaYVwLsfGgYX5Hq5aF/dhl4NSSDpikUhcDCvX62HoeImGFcWrybzIjk+9QND
dCFS2ldd2znVZsCszCVAvtKmv0+TACb2iUK8Anhte8aYc1PLnhYT95BqUSB9QiyI
Df6Pj5FQiLEyAnxVIrEh
=72G1
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"This is the first round of GPIO fixes for v4.3. Quite a lot of
patches, but the influx of new stuff in the merge window was equally
big, so I'm not surprised.
- Return value checks and thus nicer errorpath for two drivers.
- Make GPIO_RCAR arch neutral.
- Propagate errors from GPIO chip ->get() vtable call. It turned out
these can actually fail sometimes, especially on slowpath
controllers doing I2C traffic and similar.
- Update documentation to be in sync with the massive changes in the
v4.3 merge window, phew.
- Handle deferred probe properly in the OMAP driver.
- Get rid of surplus MODULE_ALIAS() from sx150x"
* tag 'gpio-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: omap: Fix GPIO numbering for deferred probe
Documentation: gpio: Explain that <function>-gpio is also supported
gpio: omap: Fix gpiochip_add() handling for deferred probe
gpio: sx150x: Remove unnecessary MODULE_ALIAS()
Documentation: gpio: board: describe the con_id parameter
Documentation: gpio: board: add flags parameter to gpiod_get*() functions
gpio: Propagate errors from chip->get()
gpio: rcar: GPIO_RCAR doesn't relate to ARM
gpio: mxs: need to check return value of irq_alloc_generic_chip
gpio: mxc: need to check return value of irq_alloc_generic_chip
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- The selftest overreads the IV test vector.
- Fix potential infinite loop in sunxi-ss driver.
- Fix powerpc build failure when VMX is set without VSX"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: testmgr - don't copy from source IV too much
crypto: sunxi-ss - Fix a possible driver hang with ciphers
crypto: vmx - VMX crypto should depend on CONFIG_VSX
The GPL does not permit us to link against the OpenSSL library. Use
LGPL for sign-file and extract-file instead.
[ The whole "openssl isn't compatible with gpl" is really just
fear-mongering, but there's no reason not to make modsign LGPL, so
nobody cares. - Linus ]
Reported-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
handful of patches to add more critical clocks on rockchip SoCs that
are affected by newly introduced gpio clock handling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Y9Y4
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple build fixes for drivers introduced in the merge window and a
handful of patches to add more critical clocks on rockchip SoCs that
are affected by newly introduced gpio clock handling"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rockchip: Add pclk_peri to critical clocks on RK3066/RK3188
clk: rockchip: add pclk_cpu to the list of rk3188 critical clocks
clk: rockchip: handle critical clocks after registering all clocks
clk: Hi6220: separately build stub clock driver
clk: h8s2678: Fix compile error
Pull CIFS fixes from Steve French:
"Two small cifs fixes"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] mount option sec=none not displayed properly in /proc/mounts
CIFS: fix type confusion in copy offload ioctl
Pull ARM fixes from Russell King:
"A number of fixes for the merge window, fixing a number of cases
missed when testing the uaccess code, particularly cases which only
show up with certain compiler versions"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8431/1: fix alignement of __bug_table section entries
arm/xen: Enable user access to the kernel before issuing a privcmd call
ARM: domains: add memory dependencies to get_domain/set_domain
ARM: domains: thread_info.h no longer needs asm/domains.h
ARM: uaccess: fix undefined instruction on ARMv7M/noMMU
ARM: uaccess: remove unneeded uaccess_save_and_disable macro
ARM: swpan: fix nwfpe for uaccess changes
ARM: 8429/1: disable GCC SRA optimization
?SYNTAX ERROR
irq_desc_get_irq_chip() does not exist. It should
be irq_desc_get_chip(). Tested by compiling
s3c2410_defconfig.
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If the gpio driver is confused about the numbers for gpio-ranges,
pinctrl_ready_for_gpio_range() may get called with invalid GPIO
causing a NULL pointer exception. Let's instead provide a warning
that allows fixing the problem and return with error.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no reason to break a line shorter than 80 columns.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since commit 323de9efdf ("pinctrl: make pinctrl_register() return proper
error code"), pinctrl_register returns an error code rather than NULL on
failure. Update a driver that was introduced more recently.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e,e1,e2;
@@
e = pinctrl_register(...)
... when != e = e1
if (
- e == NULL
+ IS_ERR(e)
) {
...
return
- e2
+ PTR_ERR(e)
;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since commit 323de9efdf ("pinctrl: make pinctrl_register() return proper
error code"), pinctrl_register returns an error code rather than NULL on
failure. Update some drivers that were introduced more recently.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e,e1,e2;
@@
e = pinctrl_register(...)
... when != e = e1
if (
- e == NULL
+ IS_ERR(e)
) {
...
return
- e2
+ PTR_ERR(e)
;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If gpio-omap probe fails with -EPROBE_DEFER, the GPIO numbering
keeps increasing. Only increase the gpio count if gpiochip_add()
was successful as otherwise the numbers will increase for each
probe attempt.
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The GPIO documentation mentions that GPIOs are mapped by defining a
<function>-gpios property in the consumer device's node but a -gpio
sufix is also supported after commit:
dd34c37aa3 ("gpio: of: Allow -gpio suffix for property names")
Update the documentation to match the implementation.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver has a I2C device id table that is used to create the module
aliases and also "sx150x" isn't a supported I2C id, so it's never used.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The con_id parameter has to match the GPIO description and is automatically
extended by the GPIO suffix if not NULL. I had to look into the code to
understand this and properly find the GPIO I've been looking for, so document
this.
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With commit 39b2bbe3d7 ("gpio: add flags argument to gpiod_get*()
functions") the gpiod_get*() functions got a 'flags' parameter. Reflect
this in the documentation, too.
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It's possible to have gpio chips hanging off unreliable remote buses
where the get() operation will fail to acquire a readout of the current
gpio state. Propagate these errors to the consumer so that they can
act on, retry or ignore these failing reads, instead of treating them as
the line being held high.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
8cd1470("gpio: rcar: Add r8a7795 (R-Car H3) support") added
GPIO support for r8a7795. r8a7795 based on CONFIG_ARM64.
OTOH, GPIO_RCAR driver can be compiled fine on non-ARM.
This patch removed ARM dependency for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Need to check return value of irq_alloc_generic_chip, because
it may return NULL.
1. Change mxs_gpio_init_gc return type from void to int.
2. Add a new lable out_irqdomain_remove to remove the irq domain
when mxc_gpio_init_gc fail.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Need to check return value of irq_alloc_generic_chip, because
it may return NULL.
1. Change mxc_gpio_init_gc return type from void to int.
2. Add a new lable out_irqdomain_remove to remove the irq domain
when mxc_gpio_init_gc fail.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
[Manually rebased]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
NCT6793D is register compatible with NCT6792D.
Also move nct6775_sio_names[] closer to enum kinds to simplify
adding new chips.
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The STEP_UP_TIME and STEP_DOWN_TIME registers are swapped for all chips but
NCT6775.
Reported-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEABECAAYFAlXqI2YACgkQ31LbvUHyf1eV9QCdH1QQrv3ze1j+5ut3hVGQFC7F
s0oAnRWfi65O5J6Ns4gEGfbjSXvF2aNf
=5RcU
-----END PGP SIGNATURE-----
Merge tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
Pull CRIS updates from Jesper Nilsson:
"Mostly removal of old cruft of which we can use a generic version, or
fixes for code not commonly run in the cris port, but also additions
to enable some good debug"
* tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits)
CRISv10: delete unused lib/dmacopy.c
CRISv10: delete unused lib/old_checksum.c
CRIS: fix switch_mm() lockdep splat
CRISv32: enable LOCKDEP_SUPPORT
CRIS: add STACKTRACE_SUPPORT
CRISv32: annotate irq enable in idle loop
CRISv32: add support for irqflags tracing
CRIS: UAPI: use generic types.h
CRIS: UAPI: use generic shmbuf.h
CRIS: UAPI: use generic msgbuf.h
CRIS: UAPI: use generic socket.h
CRIS: UAPI: use generic sembuf.h
CRIS: UAPI: use generic sockios.h
CRIS: UAPI: use generic auxvec.h
CRIS: UAPI: use generic headers via Kbuild
CRIS: UAPI: fix elf.h export
CRIS: don't make asm/elf.h depend on asm/user.h
CRIS: UAPI: fix ptrace.h
CRISv32: Squash compile warnings for axisflashmap
CRISv32: Add GPIO driver to the default configs
...
rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not
a boolean value.
Now, admittedly the "!= 0" doesn't really change the value (0 stays as
zero, 1 stays as one), but it's not only redundant, it confuses gcc, and
causes gcc to warn about the construct
switch (rq_data_dir(req)) {
case READ:
...
case WRITE:
...
that we have in a few drivers.
Now, the gcc warning is silly and stupid (it seems to warn not about the
switch value having a different type from the case statements, but about
_any_ boolean switch value), but in this case the code itself is silly
and stupid too, so let's just change it, and get rid of warnings like
this:
drivers/block/hd.c: In function ‘hd_request’:
drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool]
switch (rq_data_dir(req)) {
The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in
commit 5953316dbf ("block: make rq->cmd_flags be 64-bit") and is
presumably because the old code (that just did a logical 'and' with 1)
would then end up making the type of rq_data_dir() be u64 too.
But if we want to retain the old regular integer type, let's just cast
the result to 'int' rather than use that rather odd '!= 0'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix up the writeback plugging introduced in commit d353d7587d
("writeback: plug writeback at a high level") that then caused problems
due to the unplug happening with a spinlock held.
* writeback-plugging:
writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
Revert "writeback: plug writeback at a high level"
We had to revert the pluggin in writeback_sb_inodes() because the
wb->list_lock is held, but we could easily plug at a higher level before
taking that lock, and unplug after releasing it. This does that.
Chris will run performance numbers, just to verify that this approach is
comparable to the alternative (we could just drop and re-take the lock
around the blk_finish_plug() rather than these two commits.
I'd have preferred waiting for actual performance numbers before picking
one approach over the other, but I don't want to release rc1 with the
known "sleeping function called from invalid context" issue, so I'll
pick this cleanup version for now. But if the numbers show that we
really want to plug just at the writeback_sb_inodes() level, and we
should just play ugly games with the spinlock, we'll switch to that.
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I didn't notice this when merging the thermal code from Zhang, but his
merge (commit 5a924a07f8: "Merge branches 'thermal-core' and
'thermal-intel' of .git into next") of the thermal-core and
thermal-intel branches was wrong.
In thermal-core, commit 17e8351a77 ("thermal: consistently use int for
temperatures") converted the thermal layer to use "int" for
temperatures.
But in parallel, in the thermal-intel branch commit d0a12625d2
("thermal: Add Intel PCH thermal driver") added support for the intel
PCH thermal sensor using the old interfaces that used "unsigned long"
pointers.
This resulted in warnings like this:
drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
.get_temp = pch_thermal_get_temp,
^
drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’)
drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
.get_trip_temp = pch_get_trip_temp,
^
drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’)
This fixes it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge fourth patch-bomb from Andrew Morton:
- sys_membarier syscall
- seq_file interface changes
- a few misc fixups
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
mm/early_ioremap: add explicit #include of asm/early_ioremap.h
fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
selftests: enhance membarrier syscall test
selftests: add membarrier syscall test
sys_membarrier(): system-wide memory barrier (generic, x86)
MODSIGN: fix a compilation warning in extract-cert
improvements, and adding a mailing list to MAINTAINERS for NTB.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=CASz
-----END PGP SIGNATURE-----
Merge tag 'ntb-4.3' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason:
"NTB bug and documentation fixes, new device IDs, performance
improvements, and adding a mailing list to MAINTAINERS for NTB"
* tag 'ntb-4.3' of git://github.com/jonmason/ntb:
NTB: Fix range check on memory window index
NTB: Improve index handling in B2B MW workaround
NTB: Fix documentation for ntb_peer_db_clear.
NTB: Fix documentation for ntb_link_is_up
NTB: Use unique DMA channels for TX and RX
NTB: Remove dma_sync_wait from ntb_async_rx
NTB: Clean up QP stats info
NTB: Make the transport list in order of discovery
NTB: Add PCI Device IDs for Broadwell Xeon
NTB: Add flow control to the ntb_netdev
NTB: Add list to MAINTAINERS
Pull more input updates from Dmitry Torokhov:
"Second round of updates for the input subsystem.
This introduces two brand new touchscreen drivers (Colibri and
imx6ul_tsc), some small driver fixes, and we are no longer report
errors from evdev_flush() as users do not really have a way of
handling errors, error codes that we were returning were not on the
list of errors supposed to be returned by close(), and errors were
causing issues with one of older versions of systemd"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: imx_keypad - remove obsolete comment
Input: touchscreen - add imx6ul_tsc driver support
Input: Add touchscreen support for Colibri VF50
Input: i8042 - lower log level for "no controller" message
Input: evdev - do not report errors form flush()
Input: elants_i2c - extend the calibration timeout to 12 seconds
Input: sparcspkr - fix module autoload for OF platform drivers
Input: regulator-haptic - fix module autoload for OF platform driver
Input: pwm-beeper - fix module autoload for OF platform driver
Input: ab8500-ponkey - Fix module autoload for OF platform driver
Input: cyttsp - remove unnecessary MODULE_ALIAS()
Input: elan_i2c - add ACPI ID "ELAN1000"
- Build fix for the new Mediatek MT8173 cpufreq driver (Guenter Roeck).
- Generic power domains framework fixes (power on error code
path, subdomain removal) and cleanup of a deprecated API user
(Geert Uytterhoeven, Jon Hunter, Ulf Hansson).
- cpufreq-dt driver fixes including two fixes for bugs related to
the new Operating Performance Points Device Tree bindings
introduced recently (Viresh Kumar).
- Suspend frequency support for the cpufreq-dt driver
(Bartlomiej Zolnierkiewicz, Viresh Kumar).
- cpufreq core cleanups (Viresh Kumar).
- intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi).
- Additional sanity check in the cpuidle core (Xunlei Pang).
- Fix for a comment related to CPU power management (Lina Iyer).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=C7+4
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups on top of the previous PM+ACPI
pull request (cpufreq core and drivers, cpuidle, generic power domains
framework). Some of them didn't make to that pull request and some
fix issues introduced by it.
The only really new thing is the support for suspend frequency in the
cpufreq-dt driver, but it is needed to fix an issue with Exynos
platforms.
Specifics:
- build fix for the new Mediatek MT8173 cpufreq driver (Guenter
Roeck).
- generic power domains framework fixes (power on error code path,
subdomain removal) and cleanup of a deprecated API user (Geert
Uytterhoeven, Jon Hunter, Ulf Hansson).
- cpufreq-dt driver fixes including two fixes for bugs related to the
new Operating Performance Points Device Tree bindings introduced
recently (Viresh Kumar).
- suspend frequency support for the cpufreq-dt driver (Bartlomiej
Zolnierkiewicz, Viresh Kumar).
- cpufreq core cleanups (Viresh Kumar).
- intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi).
- additional sanity check in the cpuidle core (Xunlei Pang).
- fix for a comment related to CPU power management (Lina Iyer)"
* tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_pstate: fix PCT_TO_HWP macro
intel_pstate: Fix user input of min/max to legal policy region
PM / OPP: Return suspend_opp only if it is enabled
cpufreq-dt: add suspend frequency support
cpufreq: allow cpufreq_generic_suspend() to work without suspend frequency
PM / OPP: add dev_pm_opp_get_suspend_opp() helper
staging: board: Migrate away from __pm_genpd_name_add_device()
cpufreq: Use __func__ to print function's name
cpufreq: staticize cpufreq_cpu_get_raw()
PM / Domains: Ensure subdomain is not in use before removing
cpufreq: Add ARM_MT8173_CPUFREQ dependency on THERMAL
cpuidle/coupled: Add sanity check for safe_state_index
PM / Domains: Try power off masters in error path of __pm_genpd_poweron()
cpufreq: dt: Tolerance applies on both sides of target voltage
cpufreq: dt: Print error on failing to mark OPPs as shared
cpufreq: dt: Check OPP count before marking them shared
kernel/cpu_pm: fix cpu_cluster_pm_exit comment
Pull SCSI target updates from Nicholas Bellinger:
"Here are the outstanding target-pending updates for v4.3-rc1.
Mostly bug-fixes and minor changes this round. The fallout from the
big v4.2-rc1 RCU conversion have (thus far) been minimal.
The highlights this round include:
- Move sense handling routines into scsi_common code (Sagi)
- Return ABORTED_COMMAND sense key for PI errors (Sagi)
- Add tpg_enabled_sendtargets attribute for disabled iscsi-target
discovery (David)
- Shrink target struct se_cmd by rearranging fields (Roland)
- Drop iSCSI use of mutex around max_cmd_sn increment (Roland)
- Replace iSCSI __kernel_sockaddr_storage with sockaddr_storage (Andy +
Chris)
- Honor fabric max_data_sg_nents I/O transfer limit (Arun + Himanshu +
nab)
- Fix EXTENDED_COPY >= v4.1 regression OOPsen (Alex + nab)"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (37 commits)
target: use stringify.h instead of own definition
target/user: Fix UFLAG_UNKNOWN_OP handling
target: Remove no-op conditional
target/user: Remove unused variable
target: Fix max_cmd_sn increment w/o cmdsn mutex regressions
target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess
target/qla2xxx: Honor max_data_sg_nents I/O transfer limit
target/iscsi: Replace __kernel_sockaddr_storage with sockaddr_storage
target/iscsi: Replace conn->login_ip with login_sockaddr
target/iscsi: Keep local_ip as the actual sockaddr
target/iscsi: Fix np_ip bracket issue by removing np_ip
target: Drop iSCSI use of mutex around max_cmd_sn increment
qla2xxx: Update tcm_qla2xxx module description to 24xx+
iscsi-target: Add tpg_enabled_sendtargets for disabled discovery
drivers: target: Drop unlikely before IS_ERR(_OR_NULL)
target: check DPO/FUA usage for COMPARE AND WRITE
target: Shrink struct se_cmd by rearranging fields
target: Remove cmd->se_ordered_id (unused except debug log lines)
target: add support for START_STOP_UNIT SCSI opcode
target: improve unsupported opcode message
...
The major pieces of this patch are a set patches facilitating better
integration between scsi and scsi_dh (the device handling layer used by
multi-path; all the dm parts are acked by Mike Snitzer). It also includes
driver updates for mp3sas, scsi_debug and an assortment of bug fixes.
Signed-off-by: James Bottomley <JBottomley@Odin.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJV8yt5AAoJEDeqqVYsXL0MBsQH+wXvlx3o0BGuz5ZXfIs/RxzI
MwGnu1J0LSA9FPakkMUVOBtsxIG+pCV+4eKorQMkfGCKAZ8daaYsyYvSEM2mcqIX
1Y/srEnbzfE94JHbsI2pbiMPkB7QdtW27WjTSjQGgD9igAyVmmITiQJrXbpAlSLF
F6n++9avng+GhjXQ5TF8/y13OYgabIoAPM1j4B/ut/Ok8ReruBvMBnOla5w5RMKR
rBZKTZfUwvX5S0cuREwj8tFsRVUgdBNSrcGswFJrZo5x9WAsSHLC6+SOLZuUy1vC
ua0tNtEiyXiuR0/jSP9qv7hJ/j0BW+EGdnW6GZEzKpeMK5PxfVspOsbNunUDRsY=
=Y9G1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull second round of SCSI updates from James Bottomley:
"There's one late arriving patch here (added today), fixing a build
issue which the scsi_dh patch set in here uncovered. Other than that,
everything has been incubated in -next and the checkers for a week.
The major pieces of this patch are a set patches facilitating better
integration between scsi and scsi_dh (the device handling layer used
by multi-path; all the dm parts are acked by Mike Snitzer).
This also includes driver updates for mp3sas, scsi_debug and an
assortment of bug fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (50 commits)
scsi_dh: fix randconfig build error
scsi: fix scsi_error_handler vs. scsi_host_dev_release race
fcoe: Convert use of __constant_htons to htons
mpt2sas: setpci reset kernel oops fix
pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY
lpfc: Fix possible use-after-free and double free in lpfc_mbx_cmpl_rdp_page_a2()
bfa: Fix incorrect de-reference of pointer
bfa: Fix indentation
scsi_transport_sas: Remove check for SAS expander when querying bay/enclosure IDs.
scsi_debug: resp_request: remove unused variable
scsi_debug: fix REPORT LUNS Well Known LU
scsi_debug: schedule_resp fix input variable check
scsi_debug: make dump_sector static
scsi_debug: vfree is null safe so drop the check
scsi_debug: use SCSI_W_LUN_REPORT_LUNS instead of SAM2_WLUN_REPORT_LUNS;
scsi_debug: define pr_fmt() for consistent logging
mpt2sas: Refcount fw_events and fix unsafe list usage
mpt2sas: Refcount sas_device objects and fix unsafe list usage
scsi_dh: return SCSI_DH_NOTCONN in scsi_dh_activate()
scsi_dh: don't allow to detach device handlers at runtime
...
