PSR requires AUX IO power well to be enabled. This was already in place
for CNL, extend this for ICL too. Not enabling the power well results in
the aux error interrupts when the hardware exits PSR.
Reported-by: Casey G Bowman <casey.g.bowman@intel.com>
Reported-by: Jyoti R Yadav <jyoti.r.yadav@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Jyoti R Yadav <jyoti.r.yadav@intel.com>
Cc: Casey G Bowman <casey.g.bowman@intel.com>
Tested-by: Casey G Bowman <casey.g.bowman@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914001822.2503-1-dhinakaran.pandiyan@intel.com
SDVO encoders can have multiple different types of outputs hanging off
them. Currently the code tries to muck around with various is_foo
flags in the encoder to figure out which type its driving. That doesn't
work with atomic and other stuff, so let's nuke those flags and just
look at which type of connector we're actually dealing with.
The is_hdmi we'll need as that's not discoverable via the output flags,
but we'll just move it under the connector.
We'll also move the sdvo fixed mode handling out from the .get_modes()
hook into the sdvo lvds init function so that we can bail out properly
if there is no fixed mode to be found.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180917151504.8754-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Smatch reports:
../drivers/gpu/drm/i915/intel_sprite.c:1192 skl_plane_check_fb() warn: was || intended here instead of &&?
Obviously smatch is correct here since we're trying to check if we're
using either of the ccs modifiers. Since we now have is_ccs_modifier()
let's use it to fix this.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e21c2d3310 ("drm/i915: Move skl plane fb related checks into a better place")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918131059.793-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Clean up some cases where we're dealing with GTT pages instead of
system pages to use I915_GTT_PAGE_SIZE instead of PAGE_SHIT. So
just replace the the shifts with mul/div as appropriate. These
are the easy ones, the rest probably need some actual thought.
No real changes in the generated asm. Only gen8_ppgtt_insert_4lvl()
was affected as gcc decided to do the following change:
- be9: 89 d9 mov %ebx,%ecx
- beb: c1 e1 0c shl $0xc,%ecx
- bee: 48 63 c9 movslq %ecx,%rcx
+ be9: 48 63 cb movslq %ebx,%rcx
+ bec: 48 c1 e1 0c shl $0xc,%rcx
and that then shifted a bunch of the offset by one byte. I presume
the sign extensions in the asm are due to integer promotions from
u16 etc. Hopefully someone has confirmed that those don't end up
doing the wrong thing for us.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180917171414.19220-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The Gen3 VSP used by the DU for display does not support the packed VYUY
pixel format. Gen2 VSP hardware is able to process this format, but
DU + VSP operation isn't enabled on Gen2, and VYUY isn't a strategic
format, so it can be ignored.
Remove the format from the capabilities of the DU driver.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The framebuffer pitch and alignment constraints reflect the limitations
of the Gen2 DU hardware. On Gen3, the DU has no memory interface and
thus doesn't impose any constraint. The limitations come instead from
the VSP that has a limit of 65535 bytes for the pitch and no alignment
constraint. Update the checks accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
This patch supports pixel format of RGB332, ARGB4444, XRGB4444,
BGR888, RGB888, BGRA8888, BGRX8888 and YVYU.
VYUY pixel format is not supported by H/W specification.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Reordered formats with RGB first]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R-Car Gen3 DU utilises the VSP1 hardware for memory access. The
limits on the RPF and WPF in this pipeline are 8190x8190.
Update the supported maximum sizes accordingly.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add support for the R-Car V3H (R8A77980) SoC to the LVDS encoder driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The ESCR and OTAR registers exist in each DU channel, but at different
offsets for odd and even channels. This led to usage of the group
register access API to write them, with offsets macros named ESCR/OTAR
and ESCR2/OTAR2 for the first and second ESCR/OTAR register in the group
respectively.
The names are confusing as it suggests that the ESCR/OTAR registers for
DU0 and DU2 are taken into account, especially with writes performed to
the group register access API.
Rename the offsets to ESCR/OTAR02 and ESCR/OTAR13, and use the CRTC
register access API to clarify the code. The offsets values are updated
accordingly.
Cosmetic patch, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Squashed ESCR and OTAR changes in a single commit]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Document and re-name the 'dpll_ch' field to a more precise 'dpll_mask' for
consistency with the 'channels_mask' field defined in 'struct
rcar_du_device_info'.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
DU channels not equipped with a DPLL use an SoC internal (provided by
the CPG) or external clock source combined with a DU internal divider to
generate the desired output dot clock frequency.
The current clock selection procedure does not fully exploit the ability
of external clock sources to generate the exact dot clock frequency by
themselves, but relies instead on tuning the internal DU clock divider
only, resulting in a less precise clock generation process.
When possible, and desirable, ask the external clock source for the
exact output dot clock frequency, and select the clock source that
produces the frequency closest to the desired output dot clock.
This patch specifically targets platforms (like Salvator-X[S] and ULCBs)
where the DU's input dotclock.in is generated by the versaclock VC5
clock source, which is capable of generating the exact rate the DU needs
as pixel clock output.
This patch fixes higher resolution modes which requires an high pixel
clock output currently not working on non-HDMI DU channel (such as
1920x1080@60Hz on the VGA output).
Fixes: 1b30dbde85 ("drm: rcar-du: Add support for external pixel clock")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
[Factor out code to a helper function]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
The DU channels that have a display PLL (DPLL) can only use external
clock sources, and don't have an internal clock divider (with the
exception of H3 ES1.x where the post-divider is present and needs to be
used as a workaround for a DPLL silicon issue).
Rework the clock configuration to take this into account, avoiding
selection of non-existing clock sources or usage of a missing
post-divider.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
[Why]
It's not being used
[How]
Nuke it
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's not being used anymore.
[How]
Nuke it
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
current dc_link_detect function is not only detection but also update some link data.
[How]
added a pure get HPD state function.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
support i2c transition event log
[How]
refined aux REQ and REP events in aux flow.
commented REQ and REP events in i2c flow.
note: i2c event log is currently commented out. more work is required
to find an portocol parser to and generate event for the parser
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clock sources currently have support for asic specific
function pointers. But actual separation into functions
was never performed, leaving us with giant functions that
rely on switch.
This change creates separate functions, removing switch use.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were not providing the correct pixel clocks to DML for marks
calculation.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the ioctl is not supported on a particular piece of HW/driver
combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily
distinguished from both the lack of the ioctl and from a regular invalid
parameter.
v2: Across all the kms ioctls we had a mixture of reporting EINVAL,
ENODEV and a few ENOTSUPP (most where EINVAL) for a failed
drm_core_check_feature(). Update everybody to report ENOTSUPP.
v3: ENOTSUPP is an internal errno! It's value (524) does not correspond
to a POSIX errno, the one we want is ENOTSUP. However,
uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says
"ENOTSUP and EOPNOTSUPP have the same value on Linux,
but according to POSIX.1 these error values should be
distinct."
so use EOPNOTSUPP as its equivalent.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
Turned out the commit is incomplete and since we remove using the AGP
mapping from the GTT manager it is also not necessary any more.
This reverts commit 22d8bfafcc.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to mask the lower bits not the upper one.
Fixes: ec210e3226 drm/amdgpu: put GART away from VRAM v2
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Treat them all as Raven rather than adding a new picasso
asic type. This simplifies a lot of code and also handles the
case of rv2 chips with the 0x15d8 pci id. It also fixes dmcu
fw handling for picasso.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCU firmware version can be read using the AMDGPU_INFO ioctl
or the amdgpu_firmware_info debugfs entry
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Read the version number from the common firmware header and store
it in the dm struct
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Use consistent capitalization in the description of function arguments
* Define and consistently use the BO acronym for buffer objects
* Some minor wording improvements
Signed-off-by: Vijetha Malkai <vijetha.malkai@amd.com>
[ Michel Dänzer: Made commit log more specific ]
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The entries were only initialized once in amdgpu_sa_bo_new. If a fence
wasn't signalled yet in the first amdgpu_sa_bo_next_hole call, but then
got signalled before a later amdgpu_sa_bo_next_hole call, it could
destroy the fence but leave its pointer in the array, resulting in
use-after-free in amdgpu_sa_bo_new.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Raven2 does not enable all of the CG flags that raven1 does.
v2: rebase (Alex)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not supported yet.
v2: rebase (Alex)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the clock value there may be like 29999 10Khz.
v2: rebase (Alex)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the raven2 version number as well.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DRM_AMD_DC_DCN1_01 config flag for Raven2
v2: Make DC select DRM_AMD_DC_DCN1_01 (Alex)
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Raven2 definitions in the dc code
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Raven2 has a HW issue that it is unable to use the vram which is out of
MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the workaround that increase system
aperture high address to get rid of the VM fault and hardware hang.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Golden register settings from the hw team.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Golden register settings from the hw team.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modified for using raven2_asd.bin to replace raven_asd.bin for raven2
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rev id is used for identifying Raven2 series of chips. So we would better to
initialize it at first.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than checking the asic type, check whether the UVD
or VCE IP blocks exist. This way we don't have to update
the check with new asics that use VCN.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable gfxoff in non-sriov and stutter mode by default
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add new pci device for raven series.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some functions due to the design change.
All the mmhub power gating sequence is moved to
smu fw.Driver sends the message to enable mmhub
powergating.We can also skip the fw version check
since the old fw version is in a very early stage
and we don't use that fw for release.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as raven.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Treat it the same as raven for now.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as raven.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as raven for now.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add powerplay support for picasso, treat it the same as raven now.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for picasso to the display manager.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vm support for picasso.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the IP blocks, clock and powergating flags, and common clockgating support.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The prior assumption was that we did not need to reset the CSB on
wedging when cancelling the outstanding requests as it would be cleaned
up in the subsequent reset prior to restarting the GPU. However, what
was not accounted for was that in preparing for the reset, we would try
to process the outstanding CSB entries. If the GPU happened to complete
a CS event just as we were performing the cancellation of requests, that
event would be kept in the CSB until the reset -- but our bookkeeping
was cleared, causing confusion when trying to complete the CS event.
v2: Use a sanitize on unwedge to avoid interfering with eio suspend
(where we intentionally disable GPU reset).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107925
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914080017.30308-3-chris@chris-wilson.co.uk
If an asynchronous wait on a foriegn fence, we print a warning
indicating which fence was not signaled. As i915_sw_fences become more
common, include the debug hint (the symbol-name of the target) to help
identify the waiter. E.g.
[ 31.968144] Asynchronous wait on fence sw_sync:gem_eio:1 timed out (hint:submit_notify [i915])
We also want to downgrade from a warning to a notice (normal but
significant condition) as the timeout is imposed and controlled by the
caller (i.e. it is deliberate) and can be provoked by userspace.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914124007.18790-1-chris@chris-wilson.co.uk
That we use a WB mapping for updating the RING_TAIL register inside the
context image even on !llc machines has been a source of consternation
for every reader. It appears to work on bsw+, but it may just have been
that we have been incredibly bad at detecting the errors.
v2: With extra enthusiasm.
v3: Drop force of map type for pinned default_state as by the time we
pin it, the map type is always WB and doesn't conflict with the earlier
use by ce->state.
v4: Transfer engine->default_state from MAP_WC to MAP_WB on creation so
we do not need the MAP_FORCE littered around the backends
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914123504.2062-3-chris@chris-wilson.co.uk
Check we can indeed acquire a WB mapping of the context image on module
load. Later this will give us the opportunity to validate that we can
switch from WC to WB as required.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914123504.2062-2-chris@chris-wilson.co.uk
Now that we reload both RING_HEAD and RING_TAIL when rebinding the
context, we do not need to scrub those registers immediately on resume.
v2: Handle the perma-pinned contexts.
v3: Set RING_TAIL on context-pin so that we always have known state in
the context image for the ring registers and all parties have similar
code (ripe for refactoring).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914123504.2062-1-chris@chris-wilson.co.uk
In order to reduce latency when checking for idle we kick the tasklet
directly. Sometimes this is not enough as it is queued on another cpu
and so to improve the accuracy of this idle-check (and so to reduce
latency overall by avoiding another pass, or worse declaring a timeout!)
wait for the tasklet to complete.
References: https://bugs.freedesktop.org/show_bug.cgi?id=107916
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914080017.30308-2-chris@chris-wilson.co.uk
If we try and fail to allocate a i915_request, we apply some
backpressure on the clients to throttle the memory allocations coming
from i915.ko. Currently, we wait until completely idle, but this is far
too heavy and leads to some situations where the only escape is to
declare a client hung and reset the GPU. The intent is to only ratelimit
the allocation requests and to allow ourselves to recycle requests and
memory from any long queues built up by a client hog.
Although the system memory is inherently a global resources, we don't
want to overly penalize an unlucky client to pay the price of reaping a
hog. To reduce the influence of one client on another, we can instead of
waiting for the entire GPU to idle, impose a barrier on the local client.
(One end goal for request allocation is for scalability to many
concurrent allocators; simultaneous execbufs.)
To prevent ourselves from getting caught out by long running requests
(requests that may never finish without userspace intervention, whom we
are blocking) we need to impose a finite timeout, ideally shorter than
hangcheck. A long time ago Paul McKenney suggested that RCU users should
ratelimit themselves using judicious use of cond_synchronize_rcu(). This
gives us the opportunity to reduce our indefinite wait for the GPU to
idle to a wait for the RCU grace period of the previous allocation along
this timeline to expire, satisfying both the local and finite properties
we desire for our ratelimiting.
There are still a few global steps (reclaim not least amongst those!)
when we exhaust the immediate slab pool, at least now the wait is itself
decoupled from struct_mutex for our glorious highly parallel future!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106680
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914080017.30308-1-chris@chris-wilson.co.uk
Upcoming implementations of the R-Car DU have removed support for
interlaced display pipelines. Provide a means to determine this based on
the feature flags of the hardware configuration structs.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
These flags are represented by bit fields. To make this clear, utilise
the BIT() macro.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Use the newly exposed VSP1 interface to enable interlaced frame support
through the VSP1 LIF pipelines.
The DSMR register is updated to set the ODEV flag on interlaced
pipelines, thus defining an interlaced stream as having the ODD field
located in the second half (BOTTOM) of the frame buffer.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Kconfig doesn't have license line, thus, it is GPL-2.0 as default.
rcar_du_regs.h, rcar_lvds_regs.h are GPL-2.0,
and all other files are GPL-2.0+ as original license.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
UAPI Changes:
- Add host endian variants for the most common formats (Gerd)
- Fail ADDFB2 for big-endian drivers that don't advertise BE quirk (Gerd)
- clear smem_start in fbdev for drm drivers to avoid leaking fb addr (Daniel)
Cross-subsystem Changes:
Core Changes:
- fix drm_mode_addfb() on big endian machines (Gerd)
- add timeline point to syncobj find+replace (Chunming)
- more drmP.h removal effort (Daniel)
- split uapi portions of drm_atomic.c into drm_atomic_uapi.c (Daniel)
Driver Changes:
- bochs: Convert open-coded portions to use helpers (Peter)
- vkms: Add cursor support (Haneen)
- udmabuf: Lots of fixups (mostly cosmetic afaict) (Gerd)
- qxl: Convert to use fbdev helper (Peter)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAluaXuAACgkQlvcN/ahK
BwrQHggAtcu96+plN6cDcMcoOfnQT/OG30dBER4/cpG05hEciq/NXwXBQ9dPWtqk
Nkcgst28UbXTmt0UKck7ibfePLVqnN7+yRqnj3yrD28Qjrg1Ewr0go8cKlIJ8+8t
E6aLvgRwx5/9sHHaeCC1K1qfowEr0Put9DQvLH2BVRM3C1Sj5BXeXMP4djb5PHGU
BYGLoN9DrrVHLVARwbmzSb8V5oLED2CdRkL7WpXC2LcEGZ3jPllTN8EOoqsIMOAZ
LGnpWxADVnYTA5np3O0QJsalu942T4rMPoxgCHZmuGIhEijqk7mgGWpeOmzN71Eh
rXX1yyWvZenUc69Pbl7G7lQmE6DSDw==
=9Mxt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-09-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.20:
UAPI Changes:
- Add host endian variants for the most common formats (Gerd)
- Fail ADDFB2 for big-endian drivers that don't advertise BE quirk (Gerd)
- clear smem_start in fbdev for drm drivers to avoid leaking fb addr (Daniel)
Cross-subsystem Changes:
Core Changes:
- fix drm_mode_addfb() on big endian machines (Gerd)
- add timeline point to syncobj find+replace (Chunming)
- more drmP.h removal effort (Daniel)
- split uapi portions of drm_atomic.c into drm_atomic_uapi.c (Daniel)
Driver Changes:
- bochs: Convert open-coded portions to use helpers (Peter)
- vkms: Add cursor support (Haneen)
- udmabuf: Lots of fixups (mostly cosmetic afaict) (Gerd)
- qxl: Convert to use fbdev helper (Peter)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913130254.GA156437@art_vandelay
IPC may cause underflows if not used with dual channel symmetric
memory configuration. Disable IPC for non symmetric configurations in
affected platforms.
Display WA #1141
Changes Since V1:
- Re-arrange the code.
- update wrapper to return if memory is symmetric (Rodrigo)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824093225.12598-6-mahesh1.kumar@intel.com
Memory with 16GB dimms require an increase of 1us in level-0 latency.
This patch implements the same.
Bspec: 4381
changes since V1:
- s/memdev_info/dram_info
- make skl_is_16gb_dimm pure function
Changes since V2:
- make is_16gb_dimm more generic
- rebase
Changes since V3:
- Simplify condition (Maarten)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180831110942.9234-1-mahesh1.kumar@intel.com
This patch adds support to decode system memory bandwidth and other
parameters for skylake and Gen9+ platforms, which will be used for
arbitrated display memory bandwidth calculation in GEN9 based
platforms and WM latency level-0 Work-around calculation on GEN9+.
Changes Since V1:
- s/memdev_info/dram_info
- create a struct to hold channel info
Changes Since V2:
- rewrite code to adhere i915 coding style
- not valid for GLK
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824093225.12598-3-mahesh1.kumar@intel.com
This patch adds support to decode system memory bandwidth and other
parameters for broxton platform, which will be used for arbitrated
display memory bandwidth calculation in GEN9 based platforms and
WM latency level-0 Work-around calculation on GEN9+ platforms.
Changes since V1:
- s/memdev_info/dram_info
Changes since V2:
- Adhere to i915 coding style (Rodrigo)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824093225.12598-2-mahesh1.kumar@intel.com
Add Support to load DMC on Icelake.
While at it, also add support to load the firmware
during system resume.
v2: load firmware during system resume.(Imre)
v3: enable has_csr for icelake.(Jyoti)
v4: Only load the firmware in this patch
Cc: Jyoti Yadav <jyoti.r.yadav@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180828003844.4682-2-anusha.srivatsa@intel.com
Instead of the double linked list. Gets the size of amdgpu_vm_pt down to
64 bytes again.
We could even reduce it down to 32 bytes, but that would require some
rather extreme hacks.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can get that just by casting tv.bo.
v2: squash in kfd fix (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While cutting the lists we sometimes accidentally added a list_head from
the stack to the LRUs, effectively corrupting the list.
Remove the list cutting and use explicit list manipulation instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested: Huang Rui <ray.huang@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
After GPU reset pflip completion IRQ is disabled and hence
any subsequent mode set or plane update leads to hang.
Fix:
Unless acrtc->otg_inst is initialized to -1 during display
block initializtion then durng resume from GPU reset
amdgpu_irq_gpu_reset_resume_helper will override CRTC 0 pflip
IRQ value with whatever value was on every other unused CRTC because
dm_irq_state will do irq_source = dal_irq_type + acrtc->otg_inst
where acrtc->otg_inst will be 0 for every unused CRTC.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That should improve the PRT performance on Vega quite a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fragment size controls only the L1 on Vega/Raven and we now don't
have any extra overhead any more because of larger fragments.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This optimizes the generating of PTEs by walking the hierarchy only once
for a range and making changes as necessary.
It allows for both huge (2MB) as well giant (1GB) pages to be used on
Vega and Raven.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Less overhead and is the starting point for further cleanups and
improvements.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Less code and easier to maintain.
v2: rename the function as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows us to free all PDs/PTs without recursion.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Less code and allows for easier error handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both a leaf as well as dfs iterator to walk over all the PDs/PTs.
v2: update comments and fix for_each_amdgpu_vm_pt_dfs_safe
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add error message when register failed to reach expected value, It will
help discover potential issue.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we have framebuffers that are >= 4GiB in size we will overflow
the fb size check in intel_fill_fb_info().
Currently that is only possible with NV12 and CCS as offsets[1]
may be anything between 0 and 0xffffffff. offsets[0] is currently
required to be 0 so we can't hit the overflow with any single
plane format (thanks to max fb size of 8kx8k and max stride of
32 KiB).
In the future we may allow almost any framebuffer to exceed 4GiB
in size so we really should fix the overflow. Not that the overflow
is particularly dangerous. It's mostly just a sanity check against
insane userspace. The display engine can't write to memory anyway
so I suppose in the worst case we might anger the hw by attempting
scanout past the end of the ggtt, or we might scan out some data
that we're not supposed to see from other parts of the ggtt.
Note that triggering this overflow depends on the driver
aligning the fb height to the next tile boundary to push the
calculated size above 4GiB. With linear buffers the effective
tile height is one so that never happens, and the core already
has a check for 32bit overflow of offsets[]+pitches[]*height.
v2: Drop the unnecessary cast (Chris)
Testcase: igt/kms_big_fb/x-tiled-addfb-size-offset-overflow
Testcase: igt/kms_big_fb/y-tiled-addfb-size-offset-overflow
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912180443.28649-1-ville.syrjala@linux.intel.com
Use I915_GTT_PAGE_SIZE when talking about GTT pages rather than
physical pages.
There are some PAGE_SHIFTs left though. Not sure if we want to
introduce I915_GTT_PAGE_SHIFT or what?
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> # at least some of it :)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913150405.706-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Disable atomic on a per-device basis instead of for all devices.
Made possible by the new device.driver_features thing.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Suggested-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913163147.27900-2-ville.syrjala@linux.intel.com
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Currently we're clearing DRIVER_ATOMIC in driver.driver_features
for older platforms. This will not work correctly should we ever
have a system with and old and new GPU in it. While that is not
possible currently let's make the code more correct and use
the per-device driver_features instead.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913131622.17690-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We wish to control certain driver_features flags on a per-device basis
while still sharing a single drm_driver instance across all the
devices. To that end introduce device.driver_features. By default
it will be set to ~0 to not impose any limits beyond
driver.driver_features. Drivers can then clear specific flags
in the per-device bitmask to limit the capabilities of the device.
An alternative approach would be to copy the driver_features from
the driver into the device in drm_dev_init(), however that would
require verifying that no driver is currently changing
driver.driver_features after drm_dev_init(). Hence the ~0 apporach
was easier.
Ideally we'd also make drm_driver const but there is plenty of code
left that wants to mutate it (eg. various vfunc assignments). We'll
need to fix all that up before we can make it const.
And while at it fix up the type of the feature flag passed to
drm_core_check_feature().
v2: Streamline the && vs. & (Chris)
s/int/u32/ in drm_core_check_feature() args
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913131622.17690-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The Analogix DP bridge driver is pretty verbose, and outputs
things like
[ 619.414067] rockchip-dp ff970000.edp: Link Training Clock Recovery success
[ 619.429233] rockchip-dp ff970000.edp: Link Training success!
each time the display gets unblanked. While it is good to know
that the device is behaving correctly, users already know that
because they can see some video output.
Let's keep these messages for cases where we need to actually
debug the driver (we have dynamic debug to enable them at runtime
if need be), and let's keep the kernel quiet otherwise.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180805172857.2517-1-marc.zyngier@arm.com
We can remove the update-via-batch-buffer code path, which is basically an
effective duplicate of update-via-context-image path, if we notice that
after we have idled the GPU, we can update the context image even of the
kernel context directly. (Update-via-batch-buffer path existed only to
solve the problem of how to update the kernel context image.)
Only additional thing needed is to activate the edited configuration by
sending one empty request down the pipe. This accomplishes context restore
of the updated kernel context and so the OA configuration gets written out
to it's control registers.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912152930.28237-1-tvrtko.ursulin@linux.intel.com
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c:771:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: e498eb7136 ("drm/amd/display: Add support for hw_state logging via debugfs")
CC: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCU (Display Microcontroller Unit) is a GPU chip involved in
eDP features like Adaptive Backlight Modulation and Panel Self
Refresh.
DC is already fully equipped to initialize DMCU as long as the
firmware is loaded.
At the moment only the raven firmware is available.
A single .bin file is loaded by the kernel's loading mechanism
and split into two ucodes according to the header.
DMCU is optional, so if the firmware is not found, no error or
warning is raised.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCU (Display Microcontroller Unit) is a GPU chip involved in
eDP features like Adaptive Backlight Modulation and Panel Self
Refresh.
PSP is already equipped to handle DMCU firmware loading, all
that is needed is to translate between the new DMCU ucode ID and
the equivalent psp_gfx_fw_type.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCU (Display Microcontroller Unit) is a GPU chip involved in
eDP features like Adaptive Backlight Modulation and Panel Self
Refresh.
DMCU has two pieces of firmware: the ERAM and the interrupt
vectors, which must be loaded seperately.
To this end, the DMCU firmware has a custom header and parsing
logic similar to MEC, to extract the two ucodes from a single
struct firmware.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In stead of share one fault hash table per device, make it
per vm. This can avoid inter-process lock issue when fault
hash table is full.
Change-Id: I5d1281b7c41eddc8e26113e010516557588d3708
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Suggested-by: Christian Konig <Christian.Koenig@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cs dependencies handling doesn't need in vm resv
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Try to allocate VRAM in power of two sizes and only fallback to vram
split sizes if that fails.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the display w/a #1175 to a better place. That place
being the new skl+ specific plane->check() hook. This leaves
the skl_check_plane_surface() stuff to deal with the gtt offset
and src coordinate stuff as originally envisioned.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-12-ville.syrjala@linux.intel.com
Move the skl+ specific framebuffer related checks from
intel_plane_atomic_check_with_state() into a new function
(skl_plane_check_fb()) which we'll simply call from the skl
plane->check() hook.
v2: Split out the Y/Yf+CCS vs. interlaced change (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-11-ville.syrjala@linux.intel.com
Split up intel_check_primary_plane() and intel_check_sprite_plane()
into per-platform variants. This way we can get a unified behaviour
between the SKL universal planes, and we stop checking for non-SKL
specific scaling limits for the "sprite" planes. And we now get
a natural place where to add more plarform specific checks.
v2: Split the .check_plane() calling convention change out (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-10-ville.syrjala@linux.intel.com
We can easily calculate the plane can_scale/min_downscale on demand.
And later on we'll probably want to start calculating these dynamically
based on the cdclk just as skl already does.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-9-ville.syrjala@linux.intel.com
Let's store the final plane stride in the plane state. This avoids
having to pick between the normal vs. rotated stride during hardware
programming. And once we get GTT remapping the plane stride will
no longer match the fb stride so we'll need a place to store it
anyway.
v2: Keep checking fb->pitches[0] for cursor as later on we won't
populate plane_state->color_plane[0].stride for invisible planes
and we have been checking the cursor fb stride even for invisible
planes
v3: s/betwen/between in commit msg (José)
v4: Check color_plane[0].stride instead of fb->pitches[0] in
the skl_check_main_surface() X-tiling kludge
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180911150139.23922-1-ville.syrjala@linux.intel.com
Each plane may have different stride limitations. Let's add a new
plane function to retutn the maximum stride for each plane. There's
going to be some use for this outside the .atomic_check() stuff hence
the separate hook.
v2: Fix ilk+ x-tiled max stride to be 32k (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-3-ville.syrjala@linux.intel.com
Rename some of the tile_offset() functions to aligned_offset() since
they operate on both linear and tiled functions. And we'll include
_plane_ in the name of all the variants that take a plane state.
Should make it more clear which function to use where.
v2: Pimp the patch subject a bit (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-2-ville.syrjala@linux.intel.com
If the caller supplies more than 4G of objects and than one that has to
be in the low 4G, it is possible for the low 4G to be full before we
attempt to find room for the last object that must be there. As we don't
reorder the two types, every pass hits the same problem and we fail with
ENOSPC. However, if we impose a little bit of ordering between the two
classes of objects, on the second pass we will be able to fit the
special object as we do it first. For setups that only use !48b objects,
we now reverse the order between passes, hopefully making the subsequent
passes more likely to succeed given that we are trying a different
order (rather than repeating the previous pass!)
v2: Quick one line explanation for the relative priorities given to
reservations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912101133.31377-1-chris@chris-wilson.co.uk
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tcon_top.ko module:
ERROR: "sun8i_tcon_top_de_config" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
ERROR: "sun8i_tcon_top_set_hdmi_src" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
This solves the problem by adding a silent symbol for the tcon_top module,
building it as a separate module in exactly the cases that we need it,
but in a way that it is reachable by the other modules.
Fixes: cf77d79b4e ("drm/sun4i: tcon: Add another way for matching mixers with tcon")
Fixes: 0305189afb ("drm/sun4i: tcon: Add support for R40 TCON")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Matt Hart <matthew.hart@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180911113325.11024-1-maxime.ripard@bootlin.com
Lots of code can be removed by relying on fb-helper:
- "struct drm_framebuffer" moves to fb_helper.fb.
- "struct drm_gem_object" moves to fb_helper.obj[0].
- "struct qxl_device" can be inferred as drm_fb_helper is embedded.
- qxl_user_framebuffer_create -> drm_gem_fb_create.
- qxl_user_framebuffer_destroy -> drm_gem_fb_destroy.
- qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow).
Remove unused code:
- qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend.
- Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size.
Misc notes:
- The dirty callback is preserved as it is necessary to trigger update
commands in the hw (the screen stays black otherwise).
- No idea when .create_handle in drm_framebuffer_funcs is used, but use
the same drm_gem_fb_create_handle to match drm_gem_fb_funcs.
- I don't know why qxl_fb_find_or_create_single used to check for an
existing framebuffer and removed that check to match other drivers.
- Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to
be dynamically allocated. Replace the existing defio config by
drm_fb_helper_defio_init to accomodate this.
Testing results: startx with fbdev, modesetting and qxl all seems to
work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously
fails but others are fine. QEMU -spice and QEMU -spice with vdagent and
multiple (resized) displays (via remote-viewer) also works.
unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a
use-after-free in qxl_check_idle via qxl_ttm_fini).
Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that
would result in further code reduction, improve error handling (like not
leaking shadow memory), but unfortunately QXL has no implementation for
qxl_gem_prime_vmap.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
After GPU reset amdgpu_vm_clear_bo triggers VM flush
but job->vm_pd_addr is not set causing SDMA TO.
v2:
Per advise by Christian König avoid flushing VM for jobs where
job->vm_pd_addr wasn't explicitly set.
v3:
Shortcut vm_flush_needed early.
Fixes cbd5285 drm/amdgpu: move setting the GART addr into TTM.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helper to call the update function for both BO and shadow.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a function to get the parent of a PD/PT.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Slowly leaking memory one page at a time :)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Userspace should be free to race against itself and shoot itself in
the foot if it so desires to adjust a parameter at the same time as
submitting a batch to that context. As such, the struct_mutex in context
setparam is only being used to serialise userspace against itself and
not for any protection of internal structs and so is superfluous.
v2: Separate user_flags from internal flags to reduce chance of
interference; and use locked bit ops for user updates.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180911132206.23032-1-chris@chris-wilson.co.uk
Add an initial kerneldoc entry for vkms with a todo list.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
[danvet: Keep the todo.rst entry to point at the vkms docs instead.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907174136.GA2648@haneenDRM
This patch compute CRC for output frame with cursor and primary plane.
Blend cursor with primary plane and compute CRC on the resulted frame.
This currently passes cursor-size-change, and cursor-64x64-[onscreen,
offscreen, sliding, random, dpms, rapid-movement] from igt
kms_cursor_crc tests.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/b1749f5c90da5721a481f12740e2e370edb4a752.1536210181.git.hamohammed.sa@gmail.com
The user parameters to put_image are not copied back to userspace
(DRM_IOW), and so we can modify the ioctl parameters (having already been
copied to a temporary kernel struct) directly and use those in place,
avoiding another temporary malloc and lots of manual copying.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180906190144.1272-2-chris@chris-wilson.co.uk
Given that we are now reasonably confident in our ability to detect and
reserve the stolen memory (physical memory reserved for graphics by the
BIOS) for ourselves on most machines, we can put it to use. In this
case, we need a page to hold the overlay registers.
On an i915g running MythTv, H Buus noticed that
commit 6a2c4232ec
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Nov 4 04:51:40 2014 -0800
drm/i915: Make the physical object coherent with GTT
introduced stuttering into his video playback. After discarding the
likely suspect of it being the physical cursor updates, we were left
with the use of the phys object for the overlay. And lo, if we
completely avoid using the phys object (allocated just once on module
load!) by switching to stolen memory, the stuttering goes away.
For lack of a better explanation, claim victory and kill two birds with
one stone.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107600
Fixes: 6a2c4232ec ("drm/i915: Make the physical object coherent with GTT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180906190144.1272-1-chris@chris-wilson.co.uk
During modeset, previously configured csc coefficient matrix,if any, will
not persist. This can result in blank screen as csc mode will be programmed
while loading LUT but csc coefficient matrix remains unprogrammed.
Changes since V1:
- Removed platform check
Signed-off-by: P Raviraj Sitaram <raviraj.p.sitaram@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536589634-29680-1-git-send-email-raviraj.p.sitaram@intel.com
For buffer sharing, use dma-buf instead. We can't set smem_start to 0
unconditionally since that's used by the fbdev mmap default
implementation. And we have plenty of userspace which would like to
keep that working.
This might break legit userspace - if it does we need to look at a
case-by-cases basis how to handle that. Worst case I expect overrides
for only specific drivers, since anything remotely modern should be
using dma-buf/prime now (which is about 7 years old now for DRM
drivers).
This issue was uncovered because Noralf's rework to implement a
generic fb_probe also implements it's own fb_mmap callback. Which
means smem_start didn't have to be set anymore, which blew up some
blob in userspace rather badly.
Acked-by: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-4-daniel.vetter@ffwll.ch
This was only added for the drm's fbdev emulation support, so that it
would try harder to show the Oops.
Unfortunately this never really worked reliably, and in practice ended
up pushing the real Oops off the screen due to plentyfull locking,
sleep-while-atomic and other issues. So we removed all that support
from the fbdev emulation a while back. Aside: We've also removed the
kgdb support, for similar reasons.
Since it's such a small patch I figured I don't split this up into the
usual 3-phase removal.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: David Lechner <david@lechnology.com>
Cc: nouveau@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-1-daniel.vetter@ffwll.ch
DRM_MODE_REFLECT_X and DRM_MODE_REFLECT_Y meaning seems a bit unclear
to me, so try to clarify that with a bit of ascii graphics.
Changes since v1:
- Move the ascii graphics in the kerneldoc where all plane
properties are already documented and make sure it's properly
rendered, suggestested by Daniel Vetter.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180910172946.18539-1-alexandru-cosmin.gheorghe@arm.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/drm_plane.c: In function 'drm_mode_getplane_res':
drivers/gpu/drm/drm_plane.c:475:26: warning:
variable 'config' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1536646814-186429-1-git-send-email-yuehaibing@huawei.com
Generate xGMI iolink for upper level usage
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the iolink type defines according to the new thunk spec
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thunk will generate the XGMI topology information when necessary with the hive_id
for each specified device
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retrieve hive_id from amdgpu device
v2: compile fix
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFD need to get hive id from amdgpu to build up the XGMI topology
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver will save an array of XGMI hive info, each hive will have a list of devices
that have the same hive ID.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dummy function for xgmi function interface with psp
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Place holder for XGMI support
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On hives with xgmi enabled, the fb_location aperture is a size
which defines the total framebuffer size of all nodes in the
hive. Each GPU in the hive has the same view via the fb_location
aperture. GPU0 starts at offset (0 * segment size),
GPU1 starts at offset (1 * segment size), etc.
For access to local vram on each GPU, we need to take this offset into
account. This including on setting up GPUVM page table and GART table
v2: squash in "drm/amdgpu: Init correct fb region for none XGMI configuration"
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Used to populate the xgmi info on vega20.
v2: PF_MAX_REGION is val - 1 (Ray)
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Reviewed-by :Shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by :Shaoyun liu <Shaoyun.liu@amd.com>
Initial pass at a structure to store xgmi info. xgmi is a high
speed cross gpu interconnect.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Reviewed-by :Shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Correct the definition based on vega20 register spec
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since we use PSP to program IH regs now
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we might run into a use after free during bulk move.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix SDMA hang in prt mode, clear XNACK_WATERMARK in reg SDMA0_UTCL1_WATERMK to avoid the issue
Affected ASICs: VEGA10 VEGA12 RV1 RV2
v2: add reg clear for SDMA1
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Tested-by: Yukun Li <yukun1.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
do_div expects the 1st argument in 64bit instead of 32bit.
Drop the usage of do_div as it seems unnecessary.
V2: drop usage of do_div completely
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes following warnings.
./drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:3011:
warning: Excess function parameter 'dev' description
in 'amdgpu_vm_get_task_info'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:3012:
warning: Function parameter or member 'adev' not
described in 'amdgpu_vm_get_task_info'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:3012:
warning: Excess function parameter 'dev' description
in 'amdgpu_vm_get_task_info'
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The intent of two commits was lost in the last rebase:
810955b drm/amdgpu: Fix acquiring VM on large-BAR systems
b5d21aa drm/amdgpu: Don't use shadow BO for compute context
This commit restores the original behaviour:
* Don't set AMDGPU_GEM_CREATE_NO_CPU_ACCESS for page directories
to allow them to be reused for compute VMs
* Don't create shadow BOs for page tables in compute VMs
v2: move more logic into amdgpu_vm_bo_param
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Kent Russell <Kent.Russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the old AGP aperture to avoid GART mappings.
v2: don't enable it for SRIOV
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only initialize KFD once by moving amdgpu_amdkfd_init from
amdgpu_pci_probe to amdgpu_init. This fixes kernel oopses and hangs
when booting multi-GPU systems.
Also removed some vestiges of KFD being its own module.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Existing debug dump are all invariant, new “low 32-bit of address”
dump is not invariant
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are same purpose transition events.
[How]
remove the redundant event log.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The extraneous call to amdgpu_pm_compute_clocks is deprecated.
[How]
Remove it.
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Virtual sink is used when set mode happens on a disconnected display
to allow the mode set to proceed. This did not work with MST because
the logic for acquiring stream encoder uses stream signal to determine
the special handling is required, and stream signal is virtual instead
of DP in this case.
[How]
Use link type to decide instead.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The i2c and aux engines are similar, and should be placed
next to eachother for readability
[How]
Reorder the elements of the resource_pool struct
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Our implementation is functionally identical to DRM's
Note that instead of checking if the provided id is 0, the helper
follows through with the mode object search. However, It will still
return NULL, since 0 is not a valid object id, and missed searches
will return NULL.
[How]
Remove our implementation, and replace it with
drm_atomic_helper_best_encoder.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
AMD Stoney reference board, there are only 2 pipes (not include
underlay), and 3 connectors. resource creation, only
2 I2C/AUX engines are created. Within dc_link_aux_transfer, when
pin_data_en =2, refer to enengines[ddc_pin->pin_data->en] = NULL.
NULL point is referred later causing system crash.
[how]
each asic design has fixed number of ddc engines at hw side.
for each ddc engine, create its i2x/aux engine at sw side.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some display need disconnect delay. Adding this parameter for future use
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Although 4 unique register values exist for gamma modes, two are
actually the same (the two RAMs) It’s not possible for caller to
understand this HW specific behavior, so some parsing is necessary
in driver
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]Update Code to get DTN golden log check to pass for tests run after
DAL217 tests.
[How]Change how dcn10_log_hw_state function prints HW state info
(CM_GAMUT_REMAP_Cx_Cx registers) when GAMUT REMAP is in bypass mode.
Signed-off-by: Gary Kattan <gary.kattan@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We currently lock modeset by setting a boolean in dm. We want to lock
Based on what DC tells us.
[How]
Build stream_updates and plane_update based on what changed. Then we
call check_update_surfaces_for_stream() to get the update type
We lock only if update_type is not fast
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we won't be able to use the AGP aperture.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start to use the old AGP aperture for system memory access.
v2: Move that to amdgpu_ttm_alloc_gart
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helper to figure out the location of the AGP BAR.
v2: fix a couple of bugs
v3: correctly add one to vram_end
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct sign extend the GMC addresses to 48bit.
v2: sign extending turned out easier than thought.
v3: clean up the defines and move them into amdgpu_gmc.h as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we have a lot of FAQ on the VM state machine try to improve the
documentation by adding functions for each state move.
v2: fix typo in amdgpu_vm_bo_invalidated, use amdgpu_vm_bo_relocated in
one more place as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid unlocking a lock we never locked.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows us to avoid taking the spinlock in more places.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_vm_bo_* functions should come much later.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For under voltage, negative value will be applied to voltage
offset. Update the data type to cover this case.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
