Up until recently, semaphores weren't enabled in BDW so we didn't care
about them. But then Rodrigo came and enabled them:
commit 521e62e49a
Author: Rodrigo Vivi <rodrigo.vivi@intel.com>
drm/i915: Enable semaphores on BDW
So now we have to explicitly disable them for Execlists until both
features play nicely.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we reset a ring after a hang, we have to make sure that we clear
out all queued Execlists requests.
v2: The ring is, at this point, already being correctly re-programmed
for Execlists, and the hangcheck counters cleared.
v3: Daniel suggests to drop the "if (execlists)" because the Execlists
queue should be empty in legacy mode (which is true, if we do the
INIT_LIST_HEAD).
v4: Do the pending intel_runtime_pm_put
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is mostly for correctness so that we know we are running the LR
context correctly (this is, the PDPs are contained inside the context
object).
v2: Move the check to inside the enable PPGTT function. The switch
happens in two places: the legacy context switch (that we won't hit
when Execlists are enabled) and the PPGTT enable, which unfortunately
we need. This would look much nicer if the ppgtt->enable was part of
the ring init, where it logically belongs.
v3: Move the check to the start of the enable PPGTT function. None
of the legacy PPGTT enabling is required when using LRCs as the
PPGTT is enabled in the context descriptor and the PDPs are written
in the LRC.
v4: Clarify comment based on review feedback.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Resolve conflicts with ppgtt_enable rework.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We treat other plane updates in the same fashion. Spotted because
Rodrigo kept reporting a bug in the PSR code where the frontbuffer was
eternally stuck with a dirty cursor bit set.
The psr testcase should have caught this, but that i-g-t is kaputt.
Rodrigo is signed up to fix that.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by-and-Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we receive a storm of requests for the same context (see gem_storedw_loop_*)
we might end up iterating over too many elements in interrupt time, looking for
contexts to squash together. Instead, share the burden by giving more
intelligence to the queue function. At most, the interrupt will iterate over
three elements.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the current Execlists feeding mechanism, full preemption is not
supported yet: only lite-restores are allowed (this is: the GPU
simply samples a new tail pointer for the context currently in
execution).
But we have identified an scenario in which a full preemption occurs:
1) We submit two contexts for execution (A & B).
2) The GPU finishes with the first one (A), switches to the second one
(B) and informs us.
3) We submit B again (hoping to cause a lite restore) together with C,
but in the time we spend writing to the ELSP, the GPU finishes B.
4) The GPU start executing B again (since we told it so).
5) We receive a B finished interrupt and, mistakenly, we submit C (again)
and D, causing a full preemption of B.
The race is avoided by keeping track of how many times a context has been
submitted to the hardware and by better discriminating the received context
switch interrupts: in the example, when we have submitted B twice, we won´t
submit C and D as soon as we receive the notification that B is completed
because we were expecting to get a LITE_RESTORE and we didn´t, so we know a
second completion will be received shortly.
Without this explicit checking, somehow, the batch buffer execution order
gets messed with. This can be verified with the IGT test I sent together with
the series. I don´t know the exact mechanism by which the pre-emption messes
with the execution order but, since other people is working on the Scheduler
+ Preemption on Execlists, I didn´t try to fix it. In these series, only Lite
Restores are supported (other kind of preemptions WARN).
v2: elsp_submitted belongs in the new intel_ctx_submit_request. Several
rebase changes.
v3: Clarify how the race is avoided, as requested by Daniel.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Align function parameters ...]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Handle all context status events in the context status buffer on every
context switch interrupt. We only remove work from the execlist queue
after a context status buffer reports that it has completed and we only
attempt to schedule new contexts on interrupt when a previously submitted
context completes (unless no contexts are queued, which means the GPU is
free).
We canot call intel_runtime_pm_get() in an interrupt (or with a spinlock
grabbed, FWIW), because it might sleep, which is not a nice thing to do.
Instead, do the runtime_pm get/put together with the create/destroy request,
and handle the forcewake get/put directly.
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
v2: Unreferencing the context when we are freeing the request might free
the backing bo, which requires the struct_mutex to be grabbed, so defer
unreferencing and freeing to a bottom half.
v3:
- Ack the interrupt inmediately, before trying to handle it (fix for
missing interrupts by Bob Beckett <robert.beckett@intel.com>).
- Update the Context Status Buffer Read Pointer, just in case (spotted
by Damien Lespiau).
v4: New namespace and multiple rebase changes.
v5: Squash with "drm/i915/bdw: Do not call intel_runtime_pm_get() in an
interrupt", as suggested by Daniel.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch ...]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Context switch (and execlist submission) should happen only when
other contexts are not active, otherwise pre-emption occurs.
To assure this, we place context switch requests in a queue and those
request are later consumed when the right context switch interrupt is
received (still TODO).
v2: Use a spinlock, do not remove the requests on unqueue (wait for
context switch completion).
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
v3: Several rebases and code changes. Use unique ID.
v4:
- Move the queue/lock init to the late ring initialization.
- Damien's kmalloc review comments: check return, use sizeof(*req),
do not cast.
v5:
- Do not reuse drm_i915_gem_request. Instead, create our own.
- New namespace.
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2-v5)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[davnet: Checkpatch + wash-up s/BUG_ON/WARN_ON/.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Each logical ring context has the tail pointer in the context object,
so update it before submission.
v2: New namespace.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A context switch occurs by submitting a context descriptor to the
ExecList Submission Port. Given that we can now initialize a context,
it's possible to begin implementing the context switch by creating the
descriptor and submitting it to ELSP (actually two, since the ELSP
has two ports).
The context object must be mapped in the GGTT, which means it must exist
in the 0-4GB graphics VA range.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
v2: This code has changed quite a lot in various rebases. Of particular
importance is that now we use the globally unique Submission ID to send
to the hardware. Also, context pages are now pinned unconditionally to
GGTT, so there is no need to bind them.
v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context
ID we submit to the ELSP is globally unique and != 0 (Bspec requirements
of the software use-only bits of the Context ID in the Context Descriptor
Format) without the hassle of the previous submission Id construction.
Also, re-add the ELSP porting read (it was dropped somewhere during the
rebases).
v4:
- Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC
says: "SW must set Force Wakeup bit to prevent GT from entering C6 while
ELSP writes are in progress") as noted by Thomas Daniel
(thomas.daniel@intel.com).
- Rename functions and use an execlists/intel_execlists_ namespace.
- The BUG_ON only checked that the LRCA was <32 bits, but it didn't make
sure that it was properly aligned. Spotted by Alistair Mcaulay
<alistair.mcaulay@intel.com>.
v5:
- Improved source code comments as suggested by Chris Wilson.
- No need to abstract submit_ctx away, as pointed by Brad Volkin.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch. Sigh.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On a previous iteration of this patch, I created an Execlists
version of __i915_add_request and asbtracted it away as a
vfunc. Daniel Vetter wondered then why that was needed:
"with the clean split in command submission I expect every
function to know wether it'll submit to an lrc (everything in
intel_lrc.c) or wether it'll submit to a legacy ring (existing
code), so I don't see a need for an add_request vfunc."
The honest, hairy truth is that this patch is the glue keeping
the whole logical ring puzzle together:
- i915_add_request is used by intel_ring_idle, which in turn is
used by i915_gpu_idle, which in turn is used in several places
inside the eviction and gtt codes.
- Also, it is used by i915_gem_check_olr, which is littered all
over i915_gem.c
- ...
If I were to duplicate all the code that directly or indirectly
uses __i915_add_request, I'll end up creating a separate driver.
To show the differences between the existing legacy version and
the new Execlists one, this time I have special-cased
__i915_add_request instead of adding an add_request vfunc. I
hope this helps to untangle this Gordian knot.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Adjust to ringbuf->FIXME_lrc_ctx per the discussion with
Thomas Daniel.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The execlist patches have a bit a convoluted and long history and due
to that have the actual submission still misplaced deeply burried in
the low-level ringbuffer handling code. This design goes back to the
legacy ringbuffer code with its tricky lazy request and simple work
submissiion using ring tail writes. For that reason they need a
ring->ctx backpointer.
The goal is to unburry that code and move it up into a level where the
full execlist context is available so that we can ditch this
backpointer. Until that's done make it really obvious that there's
work still to be done.
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Thomas Daniel <thomas.daniel@intel.com>
Acked-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The current error state harks back to the era of just a single VM. For
full-ppgtt, we capture every bo on every VM. It behoves us to then print
every bo for every VM, which we currently fail to do and so miss vital
information in the error state.
v2: Use the vma address rather than -1!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On VLV, post S0i3 during i915_drm_thaw following issue is observed during ring
initialization.
[ 335.604039] [drm:stop_ring] ERROR render ring :timed out trying to stop ring
[ 336.607340] [drm:stop_ring] ERROR render ring :timed out trying to stop ring
[ 336.607345] [drm:init_ring_common] ERROR failed to set render ring head to zero ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 337.610645] [drm:stop_ring] ERROR bsd ring :timed out trying to stop ring
[ 338.613952] [drm:stop_ring] ERROR bsd ring :timed out trying to stop ring
[ 338.613956] [drm:init_ring_common] ERROR failed to set bsd ring head to zero ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 339.617256] [drm:stop_ring] ERROR render ring :timed out trying to stop ring
[ 339.617258] -----------[ cut here ]-----------
[ 339.617267] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_ringbuffer.c:1666 intel_cleanup_ring+0xe6/0xf0()
[ 339.617396] --[ end trace 5ef5ed1a3c92e2a6 ]--
[ 339.617428] [drm:__i915_drm_thaw] ERROR failed to re-initialize GPU, declaring wedged!
This is happening since wake is not enabled and Gunit registers are not restored.
For this system suspend/resume paths need to follow save/restore and additional
platform specific setup in suspend_complete and resume_prepare.
suspend_complete is shared unconditionaly for VLV, HSW, BDW. resume_prepare for
HSW and BDW has pc8 disabling which is needed during thaw_early so sharing
uncondtionally. For VLV and SNB runtime resume specific sequence exists.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Goel, Akash <akash.goel@intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With this change, intel_runtime_suspend and intel_runtime_resume functions
become completely platform agnostic. Platform specific suspend/resume
changes are moved to intel_suspend_complete and intel_resume_prepare.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Goel, Akash <akash.goel@intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rather than take and release the console_lock() around a non-existent
DRM_I915_FBDEV, move the lock acquisation into the callee where it will
be compiled out by the config option entirely. This includes moving the
deferred fb_set_suspend() dance and encapsulating it entirely within
intel_fbdev.c.
v2: Use an integral work item so that we can explicitly flush the work
upon suspend/unload.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Add the flush_work in fbdev_fini per the mailing list
discussion. And s/BUG_ON/WARN_ON/ because.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville pointed out the GCCism __builtin_types_compatible_p() that we
could use to replace our heavily casted presumption __I915__ macro that
was based on comparing struct sizes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
845/865 support different cursor sizes as well, albeit a bit differently
than later platforms. Add the necessary code to make them work.
Untested due to lack of hardware.
v2: Warn but accept invalid stride (Chris)
Rewrite the cursor size checks for other platforms (Chris)
v3: More polish and magic to the cursor size checks (Chris)
v4: Moar polish and a comment (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ever since
commit 5efb3e2838
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:28:53 2014 +0300
drm/i915/chv: Add cursor pipe offsets
the only difference between i9xx_update_cursor() and ivb_update_cursor()
was the hsw+ pipe csc handling. Let's unify them and we can rid
outselves of some duplicated code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
CURSIZE register exists on 845/865 only, so move it to
i845_update_cursor(). Changes to cursor size must be done only when the
cursor is disabled, so do the write just before enabling the cursor.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make sure the cursor gets fully clipped when enabling it on a disabled
crtc via setplane. This will prevent the lower level code from
attempting to enable the cursor in hardware.
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also remove related WARN_ONs which seem to have been hit since a rather
long time. But apperently no one noticed since our module reload is
already WARNING-infested :(
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want to move the aliasing ppgtt cleanup back into the global
gtt cleanup code for symmetry, but first we need to create such
a place.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Address space cleanup isn't really a job for the low-level cleanup
callbacks. Without this change we can't reuse the low-level cleanup
callback for the aliasing ppgtt cleanup.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that all the flow is streamlined the rule is simple: We create
a new ppgtt for a new context when we have full ppgtt enabled.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There's a bit a confusion since we track the global gtt,
the aliasing and real ppgtt in the ctx->vm pointer. And not
all callers really bother to check for the different cases and just
presume that it points to a real ppgtt.
Now looking closely we don't actually need ->vm to always point at an
address space - the only place that cares actually has fixup code
already to decide whether to look at the per-proces or the global
address space.
So switch to just tracking the ppgtt directly and ditch all the
extraneous code.
v2: Fixup the ppgtt debugfs file to not oops on a NULL ctx->ppgtt.
Also drop the early exit - without aliasing ppgtt we want to dump all
the ppgtts of the contexts if we have full ppgtt.
v3: Actually git add the compile fix.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Cc: "Thierry, Michel" <michel.thierry@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
OTC-Jira: VIZ-3724
[danvet: Resolve conflicts with execlist patches while applying.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Stuffing this into the context setup code doesn't make a lot of sense.
Also reusing the real ppgtt setup code makes even less sense since the
aliasing ppgtt isn't a real address space. Leaving all that stuff
unitialized will make sure that we catch any abusers promptly.
This is also a prep work to clean up the context->ppgtt link.
v2: Fix up the logic fail, I've fumbled it so badly to completely
disable ppgtt on gen6. Spotted by Ville and Michel. Also move around
the pde write into the gen6 init function, since otherwise it won't
work at all.
v3: Only initialize the aliasing ppgtt when we actually enable it.
Cc: "Thierry, Michel" <michel.thierry@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
[danvet: Squash in fixup from Fengguang Wu.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we abuse the aliasing ppgtt to set up the ppgtt support in
general. Which is a bit backwards since with full ppgtt we don't ever
need the aliasing ppgtt.
So untangle this and separate the ppgtt init from the aliasing
ppgtt. While at it drag it out of the context enabling (which just
does a switch to the default context).
Note that we still have the differentiation between synchronous and
asynchronous ppgtt setup, but that will soon vanish. So also correctly
wire up the return value handling to be prepared for when ->switch_mm
drops the synchronous parameter and could start to fail.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A subsequent patch will no longer initialize the aliasing ppgtt if we
have full ppgtt enabled, since we simply don't need that any more.
Unfortunately a few places check for the aliasing ppgtt instead of
checking for ppgtt in general. Fix them up.
One special case are the gtt offset and size macros, which have some
code to remap the aliasing ppgtt to the global gtt. The aliasing ppgtt
is _not_ a logical address space, so passing that in as the vm is
plain and simple a bug. So just WARN about it and carry on - we have a
gracefully fall-through anyway if we can't find the vma.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We already needs this just as a safety check in case the preallocation
reservation dance fails. But we definitely need this to be able to
move tha aliasing ppgtt setup back out of the context code to this
place, where it belongs.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Stuff in headers really aught to have this.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This essentially unbreaks non-ppgtt operation where we'd scribble over
random memory.
While at it give the vm_to_ppgtt function a proper prefix and make it
a bit more paranoid.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Hardware contexts reference a ppgtt, not the other way round. And the
only user of this (in debugfs) actually only cares about which file
the ppgtt is associated with. So give it what it wants.
While at it give the ppgtt create function a proper name&place.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So when reviewing Michel's patch I've noticed a few things and cleaned
them up:
- The early checks in ppgtt_release are now redundant: The inactive
list should always be empty now, so we can ditch these checks. Even
for the aliasing ppgtt (though that's a different confusion) since
we tear that down after all the objects are gone.
- The ppgtt handling functions are splattered all over. Consolidate
them in i915_gem_gtt.c, give them OCD prefixes and add wrappers for
get/put.
- There was a bit a confusion in ppgtt_release about whether it cares
about the active or inactive list. It should care about them both,
so augment the WARNINGs to check for both.
There's still create_vm_for_ctx left to do, put that is blocked on the
removal of ppgtt->ctx. Once that's done we can rename it to
i915_ppgtt_create and move it to its siblings for handling ppgtts.
v2: Move the ppgtt checks into the inline get/put functions as
suggested by Chris.
v3: Inline the now redundant ppgtt local variable.
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
VMAs should take a reference of the address space they use.
Now, when the fd is closed, it will release the ref that the context was
holding, but it will still be referenced by any vmas that are still
active.
ppgtt_release() should then only be called when the last thing referencing
it releases the ref, and it can just call the base cleanup and free the
ppgtt.
Note that with this we will extend the lifetime of ppgtts which
contain shared objects. But all the non-shared objects will get
removed as soon as they drop of the active list and for the shared
ones the shrinker can eventually reap them. Since we currently can't
evict ppgtt pagetables either I don't think that temporary leak is
important.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
[danvet: Add note about potential ppgtt leak with this approach.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The normal flip function places things in the ring in the legacy
way, so we either fix that or force MMIO flips always as we do in
this patch.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch. Fucking again.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is what i915_gem_do_execbuffer calls when it wants to execute some
worload in an Execlists world.
v2: Check arguments before doing stuff in intel_execlists_submission. Also,
get rel_constants parsing right.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Drop the chipset flush, that's pre-gen6. And appease
checkpatch a bit .... again!]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We need to attend context switch interrupts from all rings. Also, fixed writing
IMR/IER and added HWSTAM at ring init time.
Notice that, if added to irq_enable_mask, the context switch interrupts would
be incorrectly masked out when the user interrupts are due to no users waiting
on a sequence number. Therefore, this commit adds a bitmask of interrupts to
be kept unmasked at all times.
v2: Disable HWSTAM, as suggested by Damien (nobody listens to these interrupts,
anyway).
v3: Add new get/put_irq functions.
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2 & v3)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Drop the GEN8_ prefix from the context switch interrupt
define and move it to its brethren.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is a hard one, since there is no direct hardware ring to
control when in Execlists.
We reuse intel_ring_idle here, but it should be fine as long
as i915_add_request does the ring thing.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Same as the legacy-style ring->flush.
v2: The BSD invalidate bit still exists in GEN8! Add it for the VCS
rings (but still consolidate the blt and bsd ring flushes into one).
This was noticed by Brad Volkin.
v3: The command for BSD and for other rings is slightly different:
get it exactly the same as in gen6_ring_flush + gen6_bsd_ring_flush
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Very similar to the legacy add_request, only modified to account for
logical ringbuffer.
v2: Use MI_GLOBAL_GTT, as suggested by Brad Volkin.
v3: Unify render and non-render in the same function, as noticed by
Brad Volkin.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Well, new-ish: if all this code looks familiar, that's because it's
a clone of the existing submission mechanism (with some modifications
here and there to adapt it to LRCs and Execlists).
And why did we do this instead of reusing code, one might wonder?
Well, there are some fears that the differences are big enough that
they will end up breaking all platforms.
Also, Execlists offer several advantages, like control over when the
GPU is done with a given workload, that can help simplify the
submission mechanism, no doubt. I am interested in getting Execlists
to work first and foremost, but in the future this parallel submission
mechanism will help us to fine tune the mechanism without affecting
old gens.
v2: Pass the ringbuffer only (whenever possible).
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Appease checkpatch. Again. And drop the legacy sarea gunk
that somehow crept in.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Don't print raw numbers, use port_name() and tell the user whether it's
long or short without having to figure out what the other magic number
means.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No mistery here: the seqno is still retrieved from the engine's
HW status page (the one in the default context. For the moment,
I see no reason to worry about other context's HWS page).
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Logical rings do not need most of the initialization their
legacy ringbuffer counterparts do: we just need the pipe
control object for the render ring, enable Execlists on the
hardware and a few workarounds.
v2: Squash with: "drm/i915: Extract pipe control fini & make
init outside accesible".
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Make checkpatch happy.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Allocate and populate the default LRC for every ring, call
gen-specific init/cleanup, init/fini the command parser and
set the status page (now inside the LRC object). These are
things all engines/rings have in common.
Stopping the ring before cleanup and initializing the seqnos
is left as a TODO task (we need more infrastructure in place
before we can achieve this).
v2: Check the ringbuffer backing obj for ring_is_initialized,
instead of the context backing obj (similar, but not exactly
the same).
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Execlists are indeed a brave new world with respect to workload
submission to the GPU.
In previous version of these series, I have tried to impact the
legacy ringbuffer submission path as little as possible (mostly,
passing the context around and using the correct ringbuffer when I
needed one) but Daniel is afraid (probably with a reason) that
these changes and, especially, future ones, will end up breaking
older gens.
This commit and some others coming next will try to limit the
damage by creating an alternative path for workload submission.
The first step is here: laying out a new ring init/fini.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As suggested by Daniel Vetter. The idea, in subsequent patches, is to
provide an alternative to these vfuncs for the Execlists submission
mechanism.
v2: Splitted into two and reordered to illustrate our intentions, instead
of showing it off. Also, remove the add_request vfunc and added the
stop_ring one.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet:
- Make checkpatch happy.
- Be grumpy about the excessive vtable.
- Ditch gt->is_ring_initialized.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The backing objects and ringbuffers for contexts created via open
fd are actually empty until the user starts sending execbuffers to
them. At that point, we allocate & populate them. We do this because,
at create time, we really don't know which engine is going to be used
with the context later on (and we don't want to waste memory on
objects that we might never use).
v2: As contexts created via ioctl can only be used with the render
ring, we have enough information to allocate & populate them right
away.
v3: Defer the creation always, even with ioctl-created contexts, as
requested by Daniel Vetter.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
