Commit Graph

14957 Commits

Author SHA1 Message Date
Linus Torvalds
d5acba26bf Char/Misc driver patches for 4.19-rc1
Here is the bit set of char/misc drivers for 4.19-rc1
 
 There is a lot here, much more than normal, seems like everyone is
 writing new driver subsystems these days...  Anyway, major things here
 are:
 	- new FSI driver subsystem, yet-another-powerpc low-level
 	  hardware bus
 	- gnss, finally an in-kernel GPS subsystem to try to tame all of
 	  the crazy out-of-tree drivers that have been floating around
 	  for years, combined with some really hacky userspace
 	  implementations.  This is only for GNSS receivers, but you
 	  have to start somewhere, and this is great to see.
 Other than that, there are new slimbus drivers, new coresight drivers,
 new fpga drivers, and loads of DT bindings for all of these and existing
 drivers.
 
 Full details of everything is in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g7ew8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykfBgCeOG0RkSI92XVZe0hs/QYFW9kk8JYAnRBf3Qpm
 cvW7a+McOoKz/MGmEKsi
 =TNfn
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...
2018-08-18 11:04:51 -07:00
Linus Torvalds
2475c515d4 Staging/IIO patches for 4.19-rc1
Here are the big staging/iio patches for 4.19-rc1.
 
 Lots of churn here, with tons of cleanups happening in staging drivers,
 a removal of an old crypto driver that no one was using (skein), and the
 addition of some new IIO drivers.  Also added was a "gasket" driver from
 Google that needs loads of work and the erofs filesystem.
 
 Even with adding all of the new drivers and a new filesystem, we are
 only adding about 1000 lines overall to the kernel linecount, which
 shows just how much cleanup happened, and how big the unused crypto
 driver was.
 
 All of these have been in the linux-next tree for a while now with no
 reported issues.
 
 Note, you will have a merge problem with a device tree IIO file and the
 MAINTAINERS file, both resolutions are easy, just take all changed.
 There will be a skein file merge issue as well, but that file got
 deleted so just drop that.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g+2A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykwGACfQZz3Ncvc7thHkZytxxqQnbx5JpkAn0yV5SvF
 yVXG9SA9yCTKVjYczZjZ
 =6t/x
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here are the big staging/iio patches for 4.19-rc1.

  Lots of churn here, with tons of cleanups happening in staging
  drivers, a removal of an old crypto driver that no one was using
  (skein), and the addition of some new IIO drivers. Also added was a
  "gasket" driver from Google that needs loads of work and the erofs
  filesystem.

  Even with adding all of the new drivers and a new filesystem, we are
  only adding about 1000 lines overall to the kernel linecount, which
  shows just how much cleanup happened, and how big the unused crypto
  driver was.

  All of these have been in the linux-next tree for a while now with no
  reported issues"

* tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits)
  staging:rtl8192u: Remove unused macro definitions - Style
  staging:rtl8192u: Add spaces around '+' operator - Style
  staging:rtl8192u: Remove stale comment - Style
  staging: rtl8188eu: remove unused mp_custom_oid.h
  staging: fbtft: Add spaces around / - Style
  staging: fbtft: Erases some repetitive usage of function name - Style
  staging: fbtft: Adjust some empty-line problems - Style
  staging: fbtft: Removes one nesting level to help readability - Style
  staging: fbtft: Changes gamma table to define.
  staging: fbtft: A bit more information on dev_err.
  staging: fbtft: Fixes some alignment issues - Style
  staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style
  staging: rtl8188eu: remove unused array dB_Invert_Table
  staging: rtl8188eu: remove whitespace, add missing blank line
  staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c
  staging: rtl8188eu: remove whitespace - style
  staging: rtl8188eu: cleanup block comment - style
  staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c
  staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c
  staging: rtlwifi: refactor rtl_get_tcb_desc
  ...
2018-08-18 11:00:00 -07:00
Linus Torvalds
5695d5d197 USB/PHY patches for 4.19-rc1
Here is the big USB and phy driver patch set for 4.19-rc1.
 
 Nothing huge but there was a lot of work that happened this development
 cycle:
 	- lots of type-c work, with drivers graduating out of staging,
 	  and displayport support being added.
 	- new PHY drivers
 	- the normal collection of gadget driver updates and fixes
 	- code churn to work on the urb handling path, using irqsave()
 	  everywhere in anticipation of making this codepath a lot
 	  simpler in the future.
 	- usbserial driver fixes and reworks
 	- other misc changes
 
 Full details are in the shortlog.
 
 All of these have been in linux-next with no reported issues for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3hBPA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yloNwCggMZi9m8Krjq7d7aLw5oJJex/nIAAn0jeADOT
 NpoCgrtGHjwrATxN5/Ke
 =jXa3
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB and phy driver patch set for 4.19-rc1.

  Nothing huge but there was a lot of work that happened this
  development cycle:

   - lots of type-c work, with drivers graduating out of staging, and
     displayport support being added.

   - new PHY drivers

   - the normal collection of gadget driver updates and fixes

   - code churn to work on the urb handling path, using irqsave()
     everywhere in anticipation of making this codepath a lot simpler in
     the future.

   - usbserial driver fixes and reworks

   - other misc changes

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: serial: pl2303: add a new device id for ATEN
  usb: renesas_usbhs: Kconfig: convert to SPDX identifiers
  usb: dwc3: gadget: Check MaxPacketSize from descriptor
  usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms
  usb: dwc2: Turn on uframe_sched on "amlogic" platforms
  usb: dwc2: Turn on uframe_sched on "his" platforms
  usb: dwc2: Turn on uframe_sched on "bcm" platforms
  usb: dwc2: gadget: ISOC's starting flow improvement
  usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.
  usb: dwc3: core: Enable AutoRetry feature in the controller
  usb: dwc3: Set default mode for dwc_usb31
  usb: gadget: udc: renesas_usb3: Add register of usb role switch
  usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
  usb: dwc2: Modify dwc2_readl/writel functions prototype
  usb: dwc3: pci: Intel Merrifield can be host
  usb: dwc3: pci: Supply device properties via driver data
  arm64: dts: dwc3: description of incr burst type
  usb: dwc3: Enable undefined length INCR burst type
  usb: dwc3: add global soc bus configuration reg0
  usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci
  ...
2018-08-18 10:21:49 -07:00
David S. Miller
6e3bf9b04f Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-08-18

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a BPF selftest failure in test_cgroup_storage due to rlimit
   restrictions, from Yonghong.

2) Fix a suspicious RCU rcu_dereference_check() warning triggered
   from removing a device's XDP memory allocator by using the correct
   rhashtable lookup function, from Tariq.

3) A batch of BPF sockmap and ULP fixes mainly fixing leaks and races
   as well as enforcing module aliases for ULPs. Another fix for BPF
   map redirect to make them work again with tail calls, from Daniel.

4) Fix XDP BPF samples to unload their programs upon SIGTERM, from Jesper.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-18 10:02:49 -07:00
Ingo Molnar
5804b11034 perf/core improvements ad fixes:
kernel:
 
 . kallsyms, x86: Export addresses of PTI entry trampolines (Alexander Shishkin)
 
 . kallsyms: Simplify update_iter_mod() (Adrian Hunter)
 
 . x86: Add entry trampolines to kcore (Adrian Hunter)
 
 Hardware tracing:
 
 . Fix auxtrace queue resize (Adrian Hunter)
 
 Arch specific:
 
 . Fix uninitialized ARM SPE record error variable (Kim Phillips)
 
 . Fix trace event post-processing in powerpc (Sandipan Das)
 
 Build:
 
 . Fix check-headers.sh AND list path of execution (Alexander Kapshuk)
 
 . Remove -mcet and -fcf-protection when building the python binding
   with older clang versions (Arnaldo Carvalho de Melo)
 
 . Make check-headers.sh check based on kernel dir (Jiri Olsa)
 
 . Move syscall_64.tbl check into check-headers.sh (Jiri Olsa)
 
 Infrastructure:
 
 . Check for null when copying nsinfo.  (Benno Evers)
 
 Libraries:
 
 . Rename libtraceevent prefixes, prep work for making it a shared
   library generaly available (Tzvetomir Stoyanov (VMware))
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlt0OP8ACgkQ1lAW81NS
 qkD0lg/8Dcjd6bCgHzrRJYcR4VUNgHq4LnpJEp3VVvtV29AmptVW3hOCF6siuwDI
 H8rtMzE0gflMVHae310qTaUIzo1A6/ugoRwxUKLKU8aWkA1ikl9iJn6uaTttOCIG
 H4a/mExILDicGfxMk6kAPdyDbYr7r+1UoF58asrWVjPQNPxoJSALJCPtMnLK7Cn8
 qMZN68TqIL5zifbRe6UHKCH/SmDuowVmEIz4Nin3QtwKFPH+I02TtSdYkNWTC5WK
 o469/zy9cceA6a8Q+bVEUP0OD1mU8BvRnZogOiZ5SdMiYZlDkFSqG5MzgTtJUXQC
 DxOKkANdWu7zON/KywGDX8kcIBySzd5toTiXLvsHNNhxR8pT3bU57QvrscqLIMX+
 SVbCR03h5EwLeJopvDKZjwtcSwCWp1aCXCrmLP04tcB1zi+mUIRohbzf2vZDPfwo
 IRtoHvPAgV9UAA7M+UAAtNc7G0Gg/K2c6LlfiuxDhgjk9Jqg4NbOz3cn6rvXtGQX
 B4RM9pdhoNi9tqrXNYCnLzinzKtPhWjyEbb0FBlgvXTNQNiDVjhrkt3pC1fH1zK9
 GX1F6L78x24z3bZl5hUyYXmxOkktpAeprjICXAikYvwwige6aNENVLhCI/fVFHcx
 ByxXbFMom/dSIgU0tBfdqktd7ZmSLm94obSuA6BW8/htf2JIztM=
 =W1go
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.19-20180815' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

kernel:

- kallsyms, x86: Export addresses of PTI entry trampolines (Alexander Shishkin)

- kallsyms: Simplify update_iter_mod() (Adrian Hunter)

- x86: Add entry trampolines to kcore (Adrian Hunter)

Hardware tracing:

- Fix auxtrace queue resize (Adrian Hunter)

Arch specific:

- Fix uninitialized ARM SPE record error variable (Kim Phillips)

- Fix trace event post-processing in powerpc (Sandipan Das)

Build:

- Fix check-headers.sh AND list path of execution (Alexander Kapshuk)

- Remove -mcet and -fcf-protection when building the python binding
  with older clang versions (Arnaldo Carvalho de Melo)

- Make check-headers.sh check based on kernel dir (Jiri Olsa)

- Move syscall_64.tbl check into check-headers.sh (Jiri Olsa)

Infrastructure:

- Check for null when copying nsinfo.  (Benno Evers)

Libraries:

- Rename libtraceevent prefixes, prep work for making it a shared
  library generaly available (Tzvetomir Stoyanov (VMware))

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-18 13:11:51 +02:00
Linus Torvalds
6ada4e2826 Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - a few misc things

 - a few Y2038 fixes

 - ntfs fixes

 - arch/sh tweaks

 - ocfs2 updates

 - most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits)
  mm/hmm.c: remove unused variables align_start and align_end
  fs/userfaultfd.c: remove redundant pointer uwq
  mm, vmacache: hash addresses based on pmd
  mm/list_lru: introduce list_lru_shrink_walk_irq()
  mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one()
  mm/list_lru.c: move locking from __list_lru_walk_one() to its caller
  mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node()
  mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP
  mm/sparse: delete old sparse_init and enable new one
  mm/sparse: add new sparse_init_nid() and sparse_init()
  mm/sparse: move buffer init/fini to the common place
  mm/sparse: use the new sparse buffer functions in non-vmemmap
  mm/sparse: abstract sparse buffer allocations
  mm/hugetlb.c: don't zero 1GiB bootmem pages
  mm, page_alloc: double zone's batchsize
  mm/oom_kill.c: document oom_lock
  mm/hugetlb: remove gigantic page support for HIGHMEM
  mm, oom: remove sleep from under oom_lock
  kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()
  mm/cma: remove unsupported gfp_mask parameter from cma_alloc()
  ...
2018-08-17 16:49:31 -07:00
Christian Hansen
59ae96ffc3 tools/vm/page-types.c: add support for idle page tracking
Add a flag which causes page-types to use the kernels's idle page
tracking to mark pages idle.  As the tool already prints the idle flag
if set, subsequent runs will show which pages have been accessed since
last run.

[akpm@linux-foundation.org: simplify mark_page_idle()]
[chansen3@cisco.com: reorganize mark_page_idle() logic, add docs]
  Link: http://lkml.kernel.org/r/20180706172237.21691-1-chansen3@cisco.com
Link: http://lkml.kernel.org/r/20180612153223.13174-1-chansen3@cisco.com
Signed-off-by: Christian Hansen <chansen3@cisco.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:28 -07:00
Christian Hansen
7f1d23e607 tools/vm/page-types.c: include shared map counts
Add a new flag that will read kpagecount for each PFN and print out the
number of times the page is mapped along with the flags in the listing
view.

This information is useful in understanding and optimizing memory usage.
Identifying pages which are not shared allows us to focus on adjusting
the memory layout or access patterns for the sole owning process.
Knowing the number of processes that share a page tells us how many
other times we must make the same adjustments or how many processes to
potentially disable.

Truncated sample output:

  voffset map-cnt offset  len     flags
  561a3591e       1       15fe8   1       ___U_lA____Ma_b___________________________
  561a3591f       1       2b103   1       ___U_lA____Ma_b___________________________
  561a36ca4       1       2cc78   1       ___U_lA____Ma_b___________________________
  7f588bb4e       14      2273c   1       __RU_lA____M______________________________

[akpm@linux-foundation.org: coding-style fixes]
[chansen3@cisco.com: add documentation, tweak whitespace]
  Link: http://lkml.kernel.org/r/20180705181204.5529-1-chansen3@cisco.com
Link: http://lkml.kernel.org/r/20180612153205.12879-1-chansen3@cisco.com
Signed-off-by: Christian Hansen <chansen3@cisco.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:28 -07:00
Yonghong Song
a85da34e97 tools/bpf: fix bpf selftest test_cgroup_storage failure
The bpf selftest test_cgroup_storage failed in one of
our production test servers.
  # sudo ./test_cgroup_storage
  Failed to create map: Operation not permitted

It turns out this is due to insufficient locked memory
with system default 16KB.

Similar to other self tests, let us arm the process
with unlimited locked memory. With this change,
the test passed.
  # sudo ./test_cgroup_storage
  test_cgroup_storage:PASS

Fixes: 68cfa3ac6b ("selftests/bpf: add a cgroup storage test")
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-17 12:23:47 -07:00
Linus Torvalds
5e2d059b52 powerpc updates for 4.19
Notable changes:
 
  - A fix for a bug in our page table fragment allocator, where a page table page
    could be freed and reallocated for something else while still in use, leading
    to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for
    a powerpc only refcount.
 
  - Fixes to our pkey support. Several are user-visible changes, but bring us in
    to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer
    for reporting many of these.
 
  - A series to improve the hvc driver & related OPAL console code, which have
    been seen to cause hardlockups at times. The hvc driver changes in particular
    have been in linux-next for ~month.
 
  - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.
 
  - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use
    anywhere other than as a paper weight.
 
  - An optimised memcmp implementation using Power7-or-later VMX instructions
 
  - Support for barrier_nospec on some NXP CPUs.
 
  - Support for flushing the count cache on context switch on some IBM CPUs
    (controlled by firmware), as a Spectre v2 mitigation.
 
  - A series to enhance the information we print on unhandled signals to bring it
    into line with other arches, including showing the offending VMA and dumping
    the instructions around the fault.
 
 Thanks to:
   Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey
   Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar,
   Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan,
   Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza,
   Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt,
   Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian
   Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
   Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley,
   Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus
   Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael
   Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas
   Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap,
   Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff,
   Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson,
   Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao
   B, zhong jiang.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAlt2O6cTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgC7hD/4+cj796Df7GsVsIMxzQm7SS9dklIdO
 JuKj2Nr5HRzTH59jWlXukLG9mfTNCFgFJB4gEpK1ArDOTcHTCI9RRsLZTZ/kum66
 7Pd+7T40dLYXB5uecuUs0vMXa2fI3syKh1VLzACSXv3Dh9BBIKQBwW/aD2eww4YI
 1fS5LnXZ2PSxfr6KNAC6ogZnuaiD0sHXOYrtGHq+S/TFC7+Z6ySa6+AnPS+hPVoo
 /rHDE1Khr66aj7uk+PP2IgUrCFj6Sbj6hTVlS/iAuwbMjUl9ty6712PmvX9x6wMZ
 13hJQI+g6Ci+lqLKqmqVUpXGSr6y4NJGPS/Hko4IivBTJApI+qV/tF2H9nxU+6X0
 0RqzsMHPHy13n2torA1gC7ttzOuXPI4hTvm6JWMSsfmfjTxLANJng3Dq3ejh6Bqw
 76EMowpDLexwpy7/glPpqNdsP4ySf2Qm8yq3mR7qpL4m3zJVRGs11x+s5DW8NKBL
 Fl5SqZvd01abH+sHwv6NLaLkEtayUyohxvyqu2RU3zu5M5vi7DhqstybTPjKPGu0
 icSPh7b2y10WpOUpC6lxpdi8Me8qH47mVc/trZ+SpgBrsuEmtJhGKszEnzRCOqos
 o2IhYHQv3lQv86kpaAFQlg/RO+Lv+Lo5qbJ209V+hfU5nYzXpEulZs4dx1fbA+ze
 fK8GEh+u0L4uJg==
 =PzRz
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - A fix for a bug in our page table fragment allocator, where a page
     table page could be freed and reallocated for something else while
     still in use, leading to memory corruption etc. The fix reuses
     pt_mm in struct page (x86 only) for a powerpc only refcount.

   - Fixes to our pkey support. Several are user-visible changes, but
     bring us in to line with x86 behaviour and/or fix outright bugs.
     Thanks to Florian Weimer for reporting many of these.

   - A series to improve the hvc driver & related OPAL console code,
     which have been seen to cause hardlockups at times. The hvc driver
     changes in particular have been in linux-next for ~month.

   - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.

   - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in
     use anywhere other than as a paper weight.

   - An optimised memcmp implementation using Power7-or-later VMX
     instructions

   - Support for barrier_nospec on some NXP CPUs.

   - Support for flushing the count cache on context switch on some IBM
     CPUs (controlled by firmware), as a Spectre v2 mitigation.

   - A series to enhance the information we print on unhandled signals
     to bring it into line with other arches, including showing the
     offending VMA and dumping the instructions around the fault.

  Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey
  Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan,
  Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski,
  Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng,
  Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph
  Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave
  Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer,
  Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
  Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel
  Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh
  Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues,
  Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha,
  Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul
  Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza
  Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood,
  Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago
  Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat
  Rao, zhong jiang"

* tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits)
  powerpc/mm/book3s/radix: Add mapping statistics
  powerpc/uaccess: Enable get_user(u64, *p) on 32-bit
  powerpc/mm/hash: Remove unnecessary do { } while(0) loop
  powerpc/64s: move machine check SLB flushing to mm/slb.c
  powerpc/powernv/idle: Fix build error
  powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range
  powerpc/mm: remove warning about ‘type’ being set
  powerpc/32: Include setup.h header file to fix warnings
  powerpc: Move `path` variable inside DEBUG_PROM
  powerpc/powermac: Make some functions static
  powerpc/powermac: Remove variable x that's never read
  cxl: remove a dead branch
  powerpc/powermac: Add missing include of header pmac.h
  powerpc/kexec: Use common error handling code in setup_new_fdt()
  powerpc/xmon: Add address lookup for percpu symbols
  powerpc/mm: remove huge_pte_offset_and_shift() prototype
  powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled
  powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.
  powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements
  powerpc/fadump: handle crash memory ranges array index overflow
  ...
2018-08-17 11:32:50 -07:00
Linus Torvalds
4e31843f68 pci-v4.19-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlt1f9AUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxbdhAArnhRvkwOk4m4/LCuKF6HpmlxbBNC
 TjnBCenNf+lFXzWskfDFGFl/Wif4UzGbRTSCNQrwMzj3Ww3f/6R2QIq9rEJvyNC4
 VdxQnaBEZSUgN87q5UGqgdjMTo3zFvlFH6fpb5XDiQ5IX/QZeXeYqoB64w+HvKPU
 M+IsoOvnA5gb7pMcpchrGUnSfS1e6AqQbbTt6tZflore6YCEA4cH5OnpGx8qiZIp
 ut+CMBvQjQB01fHeBc/wGrVte4NwXdONrXqpUb4sHF7HqRNfEh0QVyPhvebBi+k1
 kquqoBQfPFTqgcab31VOcQhg70dEx+1qGm5/YBAwmhCpHR/g2gioFXoROsr+iUOe
 BtF6LZr+Y8cySuhJnkCrJBqWvvBaKbJLg0KMbI+7p4o9MZpod2u7LS5LFrlRDyKW
 3nz3o+b1+v3tCCKVKIhKo0ljolgkweQtR1f6KIHvq93wBODHVQnAOt9NlPfHVyks
 ryGBnOhMjoU5hvfexgIWFk9Ph9MEVQSffkI+TeFPO/tyGBfGfQyGtESiXuEaMQaH
 FGdZHX2RLkY3pWHOtWeMzRHzOnr2XjpDFcAqL3HBGPdJ30K3Umv3WOgoFe2SaocG
 0gaddPjKSwwM4Sa/VP+O5cjGuzi7QnczSDdpYjxIGZzBav32hqx4/rsnLw7bHH8y
 XkEme7cYJc8MGsA=
 =2Dmn
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:

 - Decode AER errors with names similar to "lspci" (Tyler Baicar)

 - Expose AER statistics in sysfs (Rajat Jain)

 - Clear AER status bits selectively based on the type of recovery (Oza
   Pawandeep)

 - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
   Gagniuc)

 - Don't clear AER status bits if we're using the "Firmware-First"
   strategy where firmware owns the registers (Alexandru Gagniuc)

 - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy
   Shevchenko)

 - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas)

 - Defer DPC event handling to work queue (Keith Busch)

 - Use threaded IRQ for DPC bottom half (Keith Busch)

 - Print AER status while handling DPC events (Keith Busch)

 - Work around IDT switch ACS Source Validation erratum (James
   Puthukattukaran)

 - Emit diagnostics for all cases of PCIe Link downtraining (Links
   operating slower than they're capable of) (Alexandru Gagniuc)

 - Skip VFs when configuring Max Payload Size (Myron Stowe)

 - Reduce Root Port Max Payload Size if necessary when hot-adding a
   device below it (Myron Stowe)

 - Simplify SHPC existence/permission checks (Bjorn Helgaas)

 - Remove hotplug sample skeleton driver (Lukas Wunner)

 - Convert pciehp to threaded IRQ handling (Lukas Wunner)

 - Improve pciehp tolerance of missed events and initially unstable
   links (Lukas Wunner)

 - Clear spurious pciehp events on resume (Lukas Wunner)

 - Add pciehp runtime PM support, including for Thunderbolt controllers
   (Lukas Wunner)

 - Support interrupts from pciehp bridges in D3hot (Lukas Wunner)

 - Mark fall-through switch cases before enabling -Wimplicit-fallthrough
   (Gustavo A. R. Silva)

 - Move DMA-debug PCI init from arch code to PCI core (Christoph
   Hellwig)

 - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is
   supplied (Heiner Kallweit)

 - Unify PCI and DMA direction #defines (Shunyong Yang)

 - Add PCI_DEVICE_DATA() macro (Andy Shevchenko)

 - Check for VPD completion before checking for timeout (Bert Kenward)

 - Limit Netronome NFP5000 config space size to work around erratum
   (Jakub Kicinski)

 - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit)

 - Document ACPI description of PCI host bridges (Bjorn Helgaas)

 - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
   peer-to-peer DMA support (we don't have the peer-to-peer support yet;
   this is just one piece) (Logan Gunthorpe)

 - Clean up devm_of_pci_get_host_bridge_resources() resource allocation
   (Jan Kiszka)

 - Fixup resizable BARs after suspend/resume (Christian König)

 - Make "pci=earlydump" generic (Sinan Kaya)

 - Fix ROM BAR access routines to stay in bounds and check for signature
   correctly (Rex Zhu)

 - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer)

 - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe)

 - To avoid bus errors, enable PASID only if entire path supports
   End-End TLP prefixes (Sinan Kaya)

 - Unify slot and bus reset functions and remove hotplug knowledge from
   callers (Sinan Kaya)

 - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
   fix guest reboot issues (Alex Williamson)

 - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD
   Controller (Bjorn Helgaas)

 - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt)

 - Remove Aardvark outbound window configuration (Evan Wang)

 - Fix Aardvark bridge window sizing issue (Zachary Zhang)

 - Convert Aardvark to use pci_host_probe() to reduce code duplication
   (Thomas Petazzoni)

 - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas)

 - Add Cadence support for optional generic PHYs (Alan Douglas)

 - Add Cadence power management ops (Alan Douglas)

 - Remove redundant variable from Cadence driver (Colin Ian King)

 - Add Kirin MSI support (Xiaowei Song)

 - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
   armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn
   Guo)

 - Move link notification settings from DesignWare core to individual
   drivers (Gustavo Pimentel)

 - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

 - Correct signature of endpoint library IRQ interfaces (Gustavo
   Pimentel)

 - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

 - Add endpoint library MSI-X test support (Gustavo Pimentel)

 - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation
   (Jia-Ju Bai)

 - Add more devices to Broadcom PAXC quirk (Ray Jui)

 - Work around corrupted Broadcom PAXC config space to enable SMMU and
   GICv3 ITS (Ray Jui)

 - Disable MSI parsing to work around broken Broadcom PAXC logic in some
   devices (Ray Jui)

 - Hide unconfigured functions to work around a Broadcom PAXC defect
   (Ray Jui)

 - Lower iproc log level to reduce console output during boot (Ray Jui)

 - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi)

 - Fix mobiveil missing include file (Lorenzo Pieralisi)

 - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi)

 - Fix mvebu I/O space remapping issues (Thomas Petazzoni)

 - Use generic pci_host_bridge in mvebu instead of ARM-specific API
   (Thomas Petazzoni)

 - Whitelist VMD devices with fast interrupt handlers to avoid sharing
   vectors with slow handlers (Keith Busch)

* tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits)
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI: Limit config space size for Netronome NFP5000
  PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips
  PCI/VPD: Check for VPD access completion before checking for timeout
  PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
  PCI: Match Root Port's MPS to endpoint's MPSS as necessary
  PCI: Skip MPS logic for Virtual Functions (VFs)
  PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
  PCI: Check for PCIe Link downtraining
  PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
  PCI: Add device-specific ACS Redirect disable infrastructure
  PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
  PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
  PCI: Allow specifying devices using a base bus and path of devfns
  PCI: Make specifying PCI devices in kernel parameters reusable
  PCI: Hide ACS quirk declarations inside PCI core
  PCI: Delay after FLR of Intel DC P3700 NVMe
  PCI: Disable Samsung SM961/PM961 NVMe before FLR
  PCI: Export pcie_has_flr()
  PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers()
  ...
2018-08-16 09:21:54 -07:00
Linus Torvalds
6de4c691ea This is the bulk of GPIO changes for the v4.19 kernel cycle:
Core changes:
 
 - Add a new API for explicitly naming GPIO consumers, when needed.
 
 - Don't let userspace set values on input lines. While we do not
   think anyone would do this crazy thing we better plug the hole
   before someone uses it and think it's a nifty feature.
 
 - Avoid calling chip->request() for unused GPIOs.
 
 New drivers/subdrivers:
 
 - The Mediatek MT7621 is supported which is a big win for OpenWRT
   and similar router distributions using this chip, as it seems
   every major router manufacturer on the planet has made products
   using this chip:
   https://wikidevi.com/wiki/MediaTek_MT7621
 
 - The Tegra 194 is now supported.
 
 - The IT87 driver now supports IT8786E and IT8718F super-IO
   chips.
 
 - Add support for Rockchip RK3328 in the syscon GPIO driver.
 
 Driver changes:
 
 - Handle the get/set_multiple() properly on MMIO chips with
   inverted direction registers. We didn't have this problem
   until a new chip appear that has get/set registers AND
   inverted direction bits, OK now we handle it.
 
 - A patch series making more error codes percolate upward
   properly for different errors on gpiochip_lock_as_irq().
 
 - Get/set multiple for the OMAP driver, accelerating these
   multiple line operations if possible.
 
 - A coprocessor interface for the Aspeed driver. Sometimes a few
   GPIO lines need to be grabbed by a co-processor for doing
   automated tasks, sometimes they are available as GPIO lines.
   By adding an explicit API in this driver we make it possible
   for the two line consumers to coexist. (This work was
   made available on the ib-aspeed branch, which may be appearing
   in other pull requests.)
 
 - Implemented .get_direction() and open drain in the SCH311x
   driver.
 
 - Continuing cleanup of included headers in GPIO drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbdDIRAAoJEEEQszewGV1zSVcP/j+dj4HL6R1l8nK4pSqDhY++
 Sz7TS5sg7IKa5uLQa7fiheOWllwxJy/gwZ73GjHDxbkT3pol2MlL8ByxC9u7gmm8
 4N4xpW0gxO5vMbkbwVj/BdL6qN//JNiwlfp+RtHO74rjUIBgc2At1qL6vul5FEPm
 T1HUuyzpZ/jd/+CyGR4kg1FrvncMUrStQOdKWN4pI8qFEzFfsGXSeJ+GCBSCjYwD
 A2Ybad6uuBfdTjrWp2AV4GpKmdKwFeQPzPjm8/CKi97nyeOckNYjDJ+M/1xUR+bb
 sghn3yJf7+FKO8Qmh+ATvjauPBuDbX5d39FgmFEJRk+ay4Uf2GviroHlwzyWjOi2
 5TUaRBubTJM8wFXICCvFvoK8CYLfJEmjJjkHeL12lkkmOlzlCRtcQ0aOLFM+37Ga
 T7Z6uloEbFK6lT1P6Q/1pfCEUOhofWKdwlWaPxs+7slhKojVJw092wu7J+arKoX9
 uLTIe9qAgi3pDRlAkZLrnNwoKTXm18K8KtTv/Uiq8n+s+JRuxA9pAoki5u242lXF
 ow22OnTgGE3hc2D3o4H1yUPZYoxG9H6iDdir0eEnZpp61xboj44iRgvyDu4LxajS
 mPOtigcu2qaCEx6EDHTgLIvlKsyQAJmsb0cZ6K4OM3EtUMDfC3WbBzs/VVF//pUa
 rb+6ruWdwkzXd+ZrnvBq
 =4+uQ
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.19 kernel cycle.

  I don't know if anything in particular stands out. Maybe the Aspeed
  coprocessor thing from Benji: Aspeed is doing baseboard management
  chips (BMC's) for servers etc.

  These Aspeed's are ARM processors that exist inside (I guess) Intel
  servers, and they are moving forward to using mainline Linux in those.
  This is one of the pieces of the puzzle to achive that. They are doing
  OpenBMC, it's pretty cool: https://lwn.net/Articles/683320/

  Summary:

  Core changes:

   - Add a new API for explicitly naming GPIO consumers, when needed.

   - Don't let userspace set values on input lines. While we do not
     think anyone would do this crazy thing we better plug the hole
     before someone uses it and think it's a nifty feature.

   - Avoid calling chip->request() for unused GPIOs.

  New drivers/subdrivers:

   - The Mediatek MT7621 is supported which is a big win for OpenWRT and
     similar router distributions using this chip, as it seems every
     major router manufacturer on the planet has made products using
     this chip: https://wikidevi.com/wiki/MediaTek_MT7621

   - The Tegra 194 is now supported.

   - The IT87 driver now supports IT8786E and IT8718F super-IO chips.

   - Add support for Rockchip RK3328 in the syscon GPIO driver.

  Driver changes:

   - Handle the get/set_multiple() properly on MMIO chips with inverted
     direction registers. We didn't have this problem until a new chip
     appear that has get/set registers AND inverted direction bits, OK
     now we handle it.

   - A patch series making more error codes percolate upward properly
     for different errors on gpiochip_lock_as_irq().

   - Get/set multiple for the OMAP driver, accelerating these multiple
     line operations if possible.

   - A coprocessor interface for the Aspeed driver. Sometimes a few GPIO
     lines need to be grabbed by a co-processor for doing automated
     tasks, sometimes they are available as GPIO lines. By adding an
     explicit API in this driver we make it possible for the two line
     consumers to coexist. (This work was made available on the
     ib-aspeed branch, which may be appearing in other pull requests.)

   - Implemented .get_direction() and open drain in the SCH311x driver.

   - Continuing cleanup of included headers in GPIO drivers"

* tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits)
  gpio: it87: Add support for IT8613
  gpio: it87: add support for IT8718F Super I/O.
  gpiolib: Avoid calling chip->request() for unused gpios
  gpio: tegra: Include the right header
  gpio: mmio: Fix up inverted direction registers
  gpio: xilinx: Use the right include
  gpio: timberdale: Include the right header
  gpio: tb10x: Use the right include
  gpiolib: Fix of_node inconsistency
  gpio: vr41xx: Bail out on gpiochip_lock_as_irq() error
  gpio: uniphier: Bail out on gpiochip_lock_as_irq() error
  gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: em: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: dwapb: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: bcm-kona: Don't shadow error code of gpiochip_lock_as_irq()
  gpiolib: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: syscon: rockchip: add GRF GPIO support for rk3328
  gpio: omap: Add get/set_multiple() callbacks
  gpio: pxa: remove set but not used variable 'gpio_offset'
  gpio-it87: add support for IT8786E Super I/O
  ...
2018-08-15 21:35:38 -07:00
Linus Torvalds
9a76aba02a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...
2018-08-15 15:04:25 -07:00
Linus Torvalds
e026bcc561 Kbuild updates for v4.19
- verify depmod is installed before modules_install
 
 - support build salt in case build ids must be unique between builds
 
 - allow users to specify additional host compiler flags via HOST*FLAGS,
   and rename internal variables to KBUILD_HOST*FLAGS
 
 - update buildtar script to drop vax support, add arm64 support
 
 - update builddeb script for better debarch support
 
 - document the pit-fall of if_changed usage
 
 - fix parallel build of UML with O= option
 
 - make 'samples' target depend on headers_install to fix build errors
 
 - remove deprecated host-progs variable
 
 - add a new coccinelle script for refcount_t vs atomic_t check
 
 - improve double-test coccinelle script
 
 - misc cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbdFZ0AAoJED2LAQed4NsGcHYP/23txxk3GRP7O4UkfPw9Rtky
 MHiXTgcoy2vbG+l12BgzWX+qFii8XTUe3dQtK4HnGQFUIBtEBV/hpZPJtxfgGSev
 Zou5cv1kr5rNzTkCn//TG3O6/WIkTBCe2hahDCtmGDI3kd/cPK4dHbU/q6KpaqIJ
 qzZYBXIvCeu2GM8idQoCRrwdMpgu1pBz1gz2sDje1yHH2toI7T6cXHRLQDgx+HPq
 LIP7W9GUsoDdXjecvPD51LiW89E6BUxETBh5Ft9r9uzwB5ylQQMcw6Qyu2DiYDUX
 PPsHCMiolYV+Ttcy+vj/67KOvKmEaFotssck+RD/xDCF17zKhRkup+YM8kPLHTVZ
 TcAUZadbnT6U/s2W6GFwvVbN/P7cc3aif+aNCC/Pl23yagp3pydlSCocYxQgiVR7
 /rx48haYDEgu/MJ1X0dOpSO0ErY7zu2OoAlNerW+D9QizwbP+WtZO/CJH8SxQRuN
 dQ1xmyNrie+ODgi9tbc4eBrsb+1rioX927TP5MbJcfXt5CTsxDmIqop5XwyYIoQN
 ZWWlzC8Ii3P2trAVpBgM2IEbngSxwr6T9Wbf1ScJnPKr/o1rq+pBk49cYstTz3kQ
 OwJ8gPwUrkW4R+hlD7L6mL/WcrKzZBQS0Ij1QW2kVSEhRrsKo99psE1/rGehnHu9
 KGB0LYYCqGSOHR4zOjg0
 =VjfG
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - verify depmod is installed before modules_install

 - support build salt in case build ids must be unique between builds

 - allow users to specify additional host compiler flags via HOST*FLAGS,
   and rename internal variables to KBUILD_HOST*FLAGS

 - update buildtar script to drop vax support, add arm64 support

 - update builddeb script for better debarch support

 - document the pit-fall of if_changed usage

 - fix parallel build of UML with O= option

 - make 'samples' target depend on headers_install to fix build errors

 - remove deprecated host-progs variable

 - add a new coccinelle script for refcount_t vs atomic_t check

 - improve double-test coccinelle script

 - misc cleanups and fixes

* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
  coccicheck: return proper error code on fail
  Coccinelle: doubletest: reduce side effect false positives
  kbuild: remove deprecated host-progs variable
  kbuild: make samples really depend on headers_install
  um: clean up archheaders recipe
  kbuild: add %asm-generic to no-dot-config-targets
  um: fix parallel building with O= option
  scripts: Add Python 3 support to tracing/draw_functrace.py
  builddeb: Add automatic support for sh{3,4}{,eb} architectures
  builddeb: Add automatic support for riscv* architectures
  builddeb: Add automatic support for m68k architecture
  builddeb: Add automatic support for or1k architecture
  builddeb: Add automatic support for sparc64 architecture
  builddeb: Add automatic support for mips{,64}r6{,el} architectures
  builddeb: Add automatic support for mips64el architecture
  builddeb: Add automatic support for ppc64 and powerpcspe architectures
  builddeb: Introduce functions to simplify kconfig tests in set_debarch
  builddeb: Drop check for 32-bit s390
  builddeb: Change architecture detection fallback to use dpkg-architecture
  builddeb: Skip architecture detection when KBUILD_DEBARCH is set
  ...
2018-08-15 12:09:03 -07:00
Linus Torvalds
1202f4fdbc arm64 updates for 4.19
A bunch of good stuff in here:
 
 - Wire up support for qspinlock, replacing our trusty ticket lock code
 
 - Add an IPI to flush_icache_range() to ensure that stale instructions
   fetched into the pipeline are discarded along with the I-cache lines
 
 - Support for the GCC "stackleak" plugin
 
 - Support for restartable sequences, plus an arm64 port for the selftest
 
 - Kexec/kdump support on systems booting with ACPI
 
 - Rewrite of our syscall entry code in C, which allows us to zero the
   GPRs on entry from userspace
 
 - Support for chained PMU counters, allowing 64-bit event counters to be
   constructed on current CPUs
 
 - Ensure scheduler topology information is kept up-to-date with CPU
   hotplug events
 
 - Re-enable support for huge vmalloc/IO mappings now that the core code
   has the correct hooks to use break-before-make sequences
 
 - Miscellaneous, non-critical fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJbbV41AAoJELescNyEwWM0WoEIALhrKtsIn6vqFlSs/w6aDuJL
 cMWmFxjTaKLmIq2+cJIdFLOJ3CH80Pu9gB+nEv/k+cZdCTfUVKfRf28HTpmYWsht
 bb4AhdHMC7yFW752BHk+mzJspeC8h/2Rm8wMuNVplZ3MkPrwo3vsiuJTofLhVL/y
 BihlU3+5sfBvCYIsWnuEZIev+/I/s/qm1ASiqIcKSrFRZP6VTt5f9TC75vFI8seW
 7yc3odKb0CArexB8yBjiPNziehctQF42doxQyL45hezLfWw4qdgHOSiwyiOMxEz9
 Fwwpp8Tx33SKLNJgqoqYznGW9PhYJ7n2Kslv19uchJrEV+mds82vdDNaWRULld4=
 =kQn6
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "A bunch of good stuff in here. Worth noting is that we've pulled in
  the x86/mm branch from -tip so that we can make use of the core
  ioremap changes which allow us to put down huge mappings in the
  vmalloc area without screwing up the TLB. Much of the positive
  diffstat is because of the rseq selftest for arm64.

  Summary:

   - Wire up support for qspinlock, replacing our trusty ticket lock
     code

   - Add an IPI to flush_icache_range() to ensure that stale
     instructions fetched into the pipeline are discarded along with the
     I-cache lines

   - Support for the GCC "stackleak" plugin

   - Support for restartable sequences, plus an arm64 port for the
     selftest

   - Kexec/kdump support on systems booting with ACPI

   - Rewrite of our syscall entry code in C, which allows us to zero the
     GPRs on entry from userspace

   - Support for chained PMU counters, allowing 64-bit event counters to
     be constructed on current CPUs

   - Ensure scheduler topology information is kept up-to-date with CPU
     hotplug events

   - Re-enable support for huge vmalloc/IO mappings now that the core
     code has the correct hooks to use break-before-make sequences

   - Miscellaneous, non-critical fixes and cleanups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
  arm64: alternative: Use true and false for boolean values
  arm64: kexec: Add comment to explain use of __flush_icache_range()
  arm64: sdei: Mark sdei stack helper functions as static
  arm64, kaslr: export offset in VMCOREINFO ELF notes
  arm64: perf: Add cap_user_time aarch64
  efi/libstub: Only disable stackleak plugin for arm64
  arm64: drop unused kernel_neon_begin_partial() macro
  arm64: kexec: machine_kexec should call __flush_icache_range
  arm64: svc: Ensure hardirq tracing is updated before return
  arm64: mm: Export __sync_icache_dcache() for xen-privcmd
  drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory
  arm64: Add support for STACKLEAK gcc plugin
  arm64: Add stack information to on_accessible_stack
  drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported
  arm64: fix ACPI dependencies
  rseq/selftests: Add support for arm64
  arm64: acpi: fix alignment fault in accessing ACPI
  efi/arm: map UEFI memory map even w/o runtime services enabled
  efi/arm: preserve early mapping of UEFI memory map longer for BGRT
  drivers: acpi: add dependency of EFI for arm64
  ...
2018-08-14 16:39:13 -07:00
Adrian Hunter
99cbbe56eb perf auxtrace: Fix queue resize
When the number of queues grows beyond 32, the array of queues is
resized but not all members were being copied. Fix by also copying
'tid', 'cpu' and 'set'.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e502789302 ("perf auxtrace: Add helpers for queuing AUX area tracing data")
Link: http://lkml.kernel.org/r/20180814084608.6563-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14 19:00:53 -03:00
Arnaldo Carvalho de Melo
5508672d7f perf python: Remove -mcet and -fcf-protection when building with clang
These options are not present in older clang versions, so when we build
for a distro that has a gcc new enough to have these options and that
the distro python build config settings use them but clang doesn't
support, b00m.

This is the case with fedora 28 and rawhide, so check if clang has the
options and remove the missing ones from CFLAGS.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-7asds7yn6gzg6ns1lw17ukul@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14 18:50:20 -03:00
Kim Phillips
3443533665 perf arm spe: Fix uninitialized record error variable
The auxtrace init variable 'err' was not being initialized, leading perf
to abort early in an SPE record command when there was no explicit
error, rather only based whatever memory contents were on the stack.
Initialize it explicitly on getting an SPE successfully, the same way
cs-etm does.

Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: ffd3d18c20 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support")
Link: http://lkml.kernel.org/r/20180810174512.52900813e57cbccf18ce99a2@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14 15:10:44 -03:00
Jiri Olsa
c9b51a0170 perf tools: Move syscall_64.tbl check into check-headers.sh
Probably leftover from the time we introducd the check-headers.sh script.

Committer testing:

Remove the 'rseq' syscall from tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
to fake a diff:

make: Entering directory '/home/acme/git/perf/tools/perf'
  BUILD:   Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
  CC       /tmp/build/perf/util/syscalltbl.o
  INSTALL  trace_plugins
<SNIP>
  $ diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
  --- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl	2018-08-13 15:49:50.896585176 -0300
  +++ arch/x86/entry/syscalls/syscall_64.tbl	2018-07-20 12:04:04.536858304 -0300
  @@ -342,6 +342,7 @@
   331	common	pkey_free		__x64_sys_pkey_free
   332	common	statx			__x64_sys_statx
   333	common	io_pgetevents		__x64_sys_io_pgetevents
  +334	common	rseq			__x64_sys_rseq

  #
  # x32-specific system call numbers start at 512 to avoid cache impact
  $

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180813111504.3568-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14 15:10:40 -03:00
Jiri Olsa
7ea6e983b2 perf tools: Make check-headers.sh check based on kernel dir
Changing the logic to compare files with paths relative to kernel source
base dir. This way we can keep the output message for 2 unrelated files,
which is coming in following patch.

Committer testing:

Remove a line from tools/arch/x86/lib/memcpy_64.S to have it detected:

make: Entering directory '/home/acme/git/perf/tools/perf'
  BUILD:   Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
  INSTALL  GTK UI
  INSTALL  binaries

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180813111504.3568-1-jolsa@kernel.org
Link: http://lkml.kernel.org/r/20180814072726.GA13931@krava
[ Do not use pushd/popd, its a bashism, reported by Michael Ellerman, fixed by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14 15:08:33 -03:00
Colin Ian King
26a1ccc6c1 bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
Trivial fix to spelling mistake in error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14 10:43:27 -07:00
Linus Torvalds
958f338e96 Merge branch 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Merge L1 Terminal Fault fixes from Thomas Gleixner:
 "L1TF, aka L1 Terminal Fault, is yet another speculative hardware
  engineering trainwreck. It's a hardware vulnerability which allows
  unprivileged speculative access to data which is available in the
  Level 1 Data Cache when the page table entry controlling the virtual
  address, which is used for the access, has the Present bit cleared or
  other reserved bits set.

  If an instruction accesses a virtual address for which the relevant
  page table entry (PTE) has the Present bit cleared or other reserved
  bits set, then speculative execution ignores the invalid PTE and loads
  the referenced data if it is present in the Level 1 Data Cache, as if
  the page referenced by the address bits in the PTE was still present
  and accessible.

  While this is a purely speculative mechanism and the instruction will
  raise a page fault when it is retired eventually, the pure act of
  loading the data and making it available to other speculative
  instructions opens up the opportunity for side channel attacks to
  unprivileged malicious code, similar to the Meltdown attack.

  While Meltdown breaks the user space to kernel space protection, L1TF
  allows to attack any physical memory address in the system and the
  attack works across all protection domains. It allows an attack of SGX
  and also works from inside virtual machines because the speculation
  bypasses the extended page table (EPT) protection mechanism.

  The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646

  The mitigations provided by this pull request include:

   - Host side protection by inverting the upper address bits of a non
     present page table entry so the entry points to uncacheable memory.

   - Hypervisor protection by flushing L1 Data Cache on VMENTER.

   - SMT (HyperThreading) control knobs, which allow to 'turn off' SMT
     by offlining the sibling CPU threads. The knobs are available on
     the kernel command line and at runtime via sysfs

   - Control knobs for the hypervisor mitigation, related to L1D flush
     and SMT control. The knobs are available on the kernel command line
     and at runtime via sysfs

   - Extensive documentation about L1TF including various degrees of
     mitigations.

  Thanks to all people who have contributed to this in various ways -
  patches, review, testing, backporting - and the fruitful, sometimes
  heated, but at the end constructive discussions.

  There is work in progress to provide other forms of mitigations, which
  might be less horrible performance wise for a particular kind of
  workloads, but this is not yet ready for consumption due to their
  complexity and limitations"

* 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  x86/microcode: Allow late microcode loading with SMT disabled
  tools headers: Synchronise x86 cpufeatures.h for L1TF additions
  x86/mm/kmmio: Make the tracer robust against L1TF
  x86/mm/pat: Make set_memory_np() L1TF safe
  x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert
  x86/speculation/l1tf: Invert all not present mappings
  cpu/hotplug: Fix SMT supported evaluation
  KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry
  x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry
  x86/speculation: Simplify sysfs report of VMX L1TF vulnerability
  Documentation/l1tf: Remove Yonah processors from not vulnerable list
  x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr()
  x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d
  x86: Don't include linux/irq.h from asm/hardirq.h
  x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d
  x86/irq: Demote irq_cpustat_t::__softirq_pending to u16
  x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush()
  x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond'
  x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush()
  cpu/hotplug: detect SMT disabled by BIOS
  ...
2018-08-14 09:46:06 -07:00
Linus Torvalds
2280a5360e Merge branch 'parisc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:

 - parisc now uses the generic dma_noncoherent_ops implementation
   (Christoph Hellwig)

 - further memory barrier and spinlock improvements (John David Anglin)

 - prepare removal of current_text_addr() functions (Nick Desaulniers)

 - improve kernel stack unwinding on parisc (me)

 - drop ENOTSUP which was defined on parisc only (me)

* 'parisc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix and improve kernel stack unwinding
  parisc: Remove unnecessary barriers from spinlock.h
  parisc: Remove ordered stores from syscall.S
  parisc: prefer _THIS_IP_ and _RET_IP_ statement expressions
  parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature
  parisc: Drop architecture-specific ENOTSUP define
  parisc: use generic dma_noncoherent_ops
  parisc: always use flush_kernel_dcache_range for DMA cache maintainance
  parisc: merge pcx_dma_ops and pcxl_dma_ops
2018-08-13 19:18:02 -07:00
Linus Torvalds
85a0b791bc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
 "Since Martin is on vacation you get the s390 pull request from me:

   - Host large page support for KVM guests. As the patches have large
     impact on arch/s390/mm/ this series goes out via both the KVM and
     the s390 tree.

   - Add an option for no compression to the "Kernel compression mode"
     menu, this will come in handy with the rework of the early boot
     code.

   - A large rework of the early boot code that will make life easier
     for KASAN and KASLR. With the rework the bootable uncompressed
     image is not generated anymore, only the bzImage is available. For
     debuggung purposes the new "no compression" option is used.

   - Re-enable the gcc plugins as the issue with the latent entropy
     plugin is solved with the early boot code rework.

   - More spectre relates changes:
      + Detect the etoken facility and remove expolines automatically.
      + Add expolines to a few more indirect branches.

   - A rewrite of the common I/O layer trace points to make them
     consumable by 'perf stat'.

   - Add support for format-3 PCI function measurement blocks.

   - Changes for the zcrypt driver:
      + Add attributes to indicate the load of cards and queues.
      + Restructure some code for the upcoming AP device support in KVM.

   - Build flags improvements in various Makefiles.

   - A few fixes for the kdump support.

   - A couple of patches for gcc 8 compile warning cleanup.

   - Cleanup s390 specific proc handlers.

   - Add s390 support to the restartable sequence self tests.

   - Some PTR_RET vs PTR_ERR_OR_ZERO cleanup.

   - Lots of bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (107 commits)
  s390/dasd: fix hanging offline processing due to canceled worker
  s390/dasd: fix panic for failed online processing
  s390/mm: fix addressing exception after suspend/resume
  rseq/selftests: add s390 support
  s390: fix br_r1_trampoline for machines without exrl
  s390/lib: use expoline for all bcr instructions
  s390/numa: move initial setup of node_to_cpumask_map
  s390/kdump: Fix elfcorehdr size calculation
  s390/cpum_sf: save TOD clock base in SDBs for time conversion
  KVM: s390: Add huge page enablement control
  s390/mm: Add huge page gmap linking support
  s390/mm: hugetlb pages within a gmap can not be freed
  KVM: s390: Add skey emulation fault handling
  s390/mm: Add huge pmd storage key handling
  s390/mm: Clear skeys for newly mapped huge guest pmds
  s390/mm: Clear huge page storage keys on enable_skey
  s390/mm: Add huge page dirty sync support
  s390/mm: Add gmap pmd invalidation and clearing
  s390/mm: Add gmap pmd notification bit setting
  s390/mm: Add gmap pmd linking
  ...
2018-08-13 19:07:17 -07:00
Linus Torvalds
f24d6f2654 Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Thomas Gleixner:
 "The lowlevel and ASM code updates for x86:

   - Make stack trace unwinding more reliable

   - ASM instruction updates for better code generation

   - Various cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Add two more instruction suffixes
  x86/asm/64: Use 32-bit XOR to zero registers
  x86/build/vdso: Simplify 'cmd_vdso2c'
  x86/build/vdso: Remove unused vdso-syms.lds
  x86/stacktrace: Enable HAVE_RELIABLE_STACKTRACE for the ORC unwinder
  x86/unwind/orc: Detect the end of the stack
  x86/stacktrace: Do not fail for ORC with regs on stack
  x86/stacktrace: Clarify the reliable success paths
  x86/stacktrace: Remove STACKTRACE_DUMP_ONCE
  x86/stacktrace: Do not unwind after user regs
  x86/asm: Use CC_SET/CC_OUT in percpu_cmpxchg8b_double() to micro-optimize code generation
2018-08-13 13:35:26 -07:00
Linus Torvalds
1e45e9a95e Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "The timers departement more or less proudly presents:

   - More Y2038 timekeeping work mostly in the core code. The work is
     slowly, but steadily targeting the actuall syscalls.

   - Enhanced timekeeping suspend/resume support by utilizing
     clocksources which do not stop during suspend, but are otherwise
     not the main timekeeping clocksources.

   - Make NTP adjustmets more accurate and immediate when the frequency
     is set directly and not incrementally.

   - Sanitize the overrung handing of posix timers

   - A new timer driver for Mediatek SoCs

   - The usual pile of fixes and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  clockevents: Warn if cpu_all_mask is used as cpumask
  tick/broadcast-hrtimer: Use cpu_possible_mask for ce_broadcast_hrtimer
  clocksource/drivers/arm_arch_timer: Fix bogus cpu_all_mask usage
  clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag
  timers: Clear timer_base::must_forward_clk with timer_base::lock held
  clocksource/drivers/sprd: Register one always-on timer to compensate suspend time
  clocksource/drivers/timer-mediatek: Add support for system timer
  clocksource/drivers/timer-mediatek: Convert the driver to timer-of
  clocksource/drivers/timer-mediatek: Use specific prefix for GPT
  clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatek
  clocksource/drivers/timer-mediatek: Add system timer bindings
  clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask
  time: Introduce one suspend clocksource to compensate the suspend time
  time: Fix extra sleeptime injection when suspend fails
  timekeeping/ntp: Constify some function arguments
  ntp: Use kstrtos64 for s64 variable
  ntp: Remove redundant arguments
  timer: Fix coding style
  ktime: Provide typesafe ktime_to_ns()
  hrtimer: Improve kernel message printing
  ...
2018-08-13 13:02:31 -07:00
Linus Torvalds
8603596a32 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf update from Thomas Gleixner:
 "The perf crowd presents:

  Kernel updates:

   - Removal of jprobes

   - Cleanup and consolidatation the handling of kprobes

   - Cleanup and consolidation of hardware breakpoints

   - The usual pile of fixes and updates to PMUs and event descriptors

  Tooling updates:

   - Updates and improvements all over the place. Nothing outstanding,
     just the (good) boring incremental grump work"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
  perf trace: Do not require --no-syscalls to suppress strace like output
  perf bpf: Include uapi/linux/bpf.h from the 'perf trace' script's bpf.h
  perf tools: Allow overriding MAX_NR_CPUS at compile time
  perf bpf: Show better message when failing to load an object
  perf list: Unify metric group description format with PMU event description
  perf vendor events arm64: Update ThunderX2 implementation defined pmu core events
  perf cs-etm: Generate branch sample for CS_ETM_TRACE_ON packet
  perf cs-etm: Generate branch sample when receiving a CS_ETM_TRACE_ON packet
  perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet
  perf cs-etm: Fix start tracing packet handling
  perf build: Fix installation directory for eBPF
  perf c2c report: Fix crash for empty browser
  perf tests: Fix indexing when invoking subtests
  perf trace: Beautify the AF_INET & AF_INET6 'socket' syscall 'protocol' args
  perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg
  perf trace beauty: Do not print NULL strarray entries
  perf beauty: Add a generator for IPPROTO_ socket's protocol constants
  tools include uapi: Grab a copy of linux/in.h
  perf tests: Fix complex event name parsing
  perf evlist: Fix error out while applying initial delay and LBR
  ...
2018-08-13 12:55:49 -07:00
Linus Torvalds
de5d1b39ea Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking/atomics update from Thomas Gleixner:
 "The locking, atomics and memory model brains delivered:

   - A larger update to the atomics code which reworks the ordering
     barriers, consolidates the atomic primitives, provides the new
     atomic64_fetch_add_unless() primitive and cleans up the include
     hell.

   - Simplify cmpxchg() instrumentation and add instrumentation for
     xchg() and cmpxchg_double().

   - Updates to the memory model and documentation"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
  locking/atomics: Rework ordering barriers
  locking/atomics: Instrument cmpxchg_double*()
  locking/atomics: Instrument xchg()
  locking/atomics: Simplify cmpxchg() instrumentation
  locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation
  tools/memory-model: Rename litmus tests to comply to norm7
  tools/memory-model/Documentation: Fix typo, smb->smp
  sched/Documentation: Update wake_up() & co. memory-barrier guarantees
  locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
  sched/core: Use smp_mb() in wake_woken_function()
  tools/memory-model: Add informal LKMM documentation to MAINTAINERS
  locking/atomics/Documentation: Describe atomic_set() as a write operation
  tools/memory-model: Make scripts executable
  tools/memory-model: Remove ACCESS_ONCE() from model
  tools/memory-model: Remove ACCESS_ONCE() from recipes
  locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example
  MAINTAINERS: Add Daniel Lustig as an LKMM reviewer
  tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name
  tools/memory-model: Add litmus test for full multicopy atomicity
  locking/refcount: Always allow checked forms
  ...
2018-08-13 12:23:39 -07:00
Alexander Kapshuk
51d8aac236 perf tools: Fix check-headers.sh AND list path of execution
The '||' path of execution in the 'test' block of the check_2() function
may also be taken if file2 does not exist, in which case the warning
message about the ABI headers being different would still be printed
where it should not be.  See below.

  % file1=file1; file2=file2
  % cmd="echo diff $file1 $file2"
  % test -f $file2 && \
    eval $cmd || echo "Warning: Kernel ABI header at 'tools/$file1'
                       differs from latest version at '$file2'" >&2
                       Warning: Kernel ABI header at 'tools/file1' differs from latest
                       version at 'file2'

The proposed patch converts the code following the '&&' operator into a
compound list to be executed in the current process environment only if file2
does exist. Should the files being compared differ, a diff command to compare
the files concerned is printed on standard output. E.g.

  $ diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S

Committer testing:

Remove a line from that tools/arch/x86/lib/memcpy_64.S file to test
this:

  BUILD:   Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o

Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180811083915.17471-1-alexander.kapshuk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:46:19 -03:00
Benno Evers
3f4417d693 perf tools: Check for null when copying nsinfo.
The argument to nsinfo__copy() was assumed to be valid, but some code paths
exist that will lead to NULL being passed.

In particular, running 'perf script -D' on a perf.data file containing an
PERF_RECORD_MMAP event associating the '[vdso]' dso with pid 0 earlier in
the event stream will lead to a segfault.

Since all calling code is already checking for a non-null return value,
just return NULL for this case as well.

Signed-off-by: Benno Evers <bevers@mesosphere.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180810133614.9925-1-bevers@mesosphere.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:39:09 -03:00
Tzvetomir Stoyanov (VMware)
0ae98637b6 tools lib traceevent: Rename static variables and functions in event-parse.c
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
static variables and functions in event-parse.c: pevent_func_params,
__pevent_parse_format, __pevent_parse_event, pevent_error_str, pevent_search_event

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180703.575392642@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:37:26 -03:00
Tzvetomir Stoyanov (VMware)
c99eeaf549 tools lib traceevent: Rename various pevent APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_reset_function_resolver, pevent_strerror, pevent_list_events,
pevent_event_common_fields, pevent_event_fields, pevent_ref, pevent_unref

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180703.426198047@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:36:43 -03:00
Tzvetomir Stoyanov (VMware)
1634e4604c tools lib traceevent: Rename internal parser related APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_buffer_init, pevent_read_token, pevent_free_token,
pevent_peek_char, pevent_get_input_buf, pevent_get_input_buf_ptr

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180703.275281085@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:35:58 -03:00
Tzvetomir Stoyanov (VMware)
413af01c8d tools lib traceevent: Rename various pevent get/set/is APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_pid_is_registered, pevent_get_cpus, pevent_set_cpus,
pevent_is_file_bigendian, pevent_is_host_bigendian, pevent_is_latency_format,
pevent_set_latency_format

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180703.114110715@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:35:02 -03:00
Tzvetomir Stoyanov (VMware)
610e1e4ff0 tools lib traceevent: Rename pevent_find_* APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_find_function, pevent_find_function_address,
pevent_find_event_by_name, pevent_find_event_by_record

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.966965051@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:31:28 -03:00
Tzvetomir Stoyanov (VMware)
8b3e08722e tools lib traceevent: Rename pevent field APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_free_format, pevent_free_format_field, pevent_get_field_raw,
pevent_get_field_val, pevent_get_common_field_val, pevent_get_any_field_val

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.821244942@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:30:30 -03:00
Tzvetomir Stoyanov (VMware)
dc05ebf373 tools lib traceevent: Rename pevent_data_ APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_data_lat_fmt, pevent_data_type, pevent_data_event_from_type,
pevent_data_pid, pevent_data_preempt_count, pevent_data_flags,
pevent_data_comm_from_pid, pevent_data_pid_from_comm, pevent_cmdline_pid

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.678020020@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:28:36 -03:00
Tzvetomir Stoyanov (VMware)
b843e9c3a2 tools lib traceevent: Rename pevent_register / unregister APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_register_print_function, pevent_unregister_print_function,
pevent_register_event_handler, pevent_unregister_event_handler,
pevent_register_function, pevent_register_trace_clock

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.524813185@goodmis.org
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:27:35 -03:00
Tzvetomir Stoyanov (VMware)
64e2379069 tools lib traceevent: Rename pevent_filter* APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: PEVENT_FILTER_ERROR_BUFSZ, pevent_filter_alloc,
pevent_filter_add_filter_str, pevent_filter_match, pevent_filter_strerror,
pevent_event_filtered, pevent_filter_reset, pevent_filter_clear_trivial,
pevent_filter_free, pevent_filter_make_string, pevent_filter_remove_event,
pevent_filter_event_has_trivial, pevent_filter_copy, pevent_update_trivial,
pevent_filter_compare

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.370659353@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:26:31 -03:00
Tzvetomir Stoyanov (VMware)
ca2921dd90 tools lib traceevent, perf tools: Rename traceevent_plugin_* APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "traceevent_". This changes
APIs: traceevent_plugin_list_options, traceevent_plugin_free_options_list,
traceevent_plugin_add_options, traceevent_plugin_remove_options,
traceevent_print_plugins

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.089951638@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:25:36 -03:00
Tzvetomir Stoyanov (VMware)
3cf477836e tools lib traceevent: Rename pevent_function* APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_function_handler, pevent_func_handler,
pevent_func_arg_type, PEVENT_FUNC_ARG_VOID, PEVENT_FUNC_ARG_INT,
PEVENT_FUNC_ARG_LONG, PEVENT_FUNC_ARG_STRING, PEVENT_FUNC_ARG_PTRS,
PEVENT_FUNC_ARG_MAX_TYPES

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.935881193@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:24:26 -03:00
Tzvetomir Stoyanov (VMware)
d97f4ef177 tools lib traceevent, tools lib lockdep: Rename 'enum pevent_errno' to 'enum tep_errno'
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
'enum pevent_errno' to 'enum tep_errno'.

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.770475059@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:23:07 -03:00
Tzvetomir Stoyanov (VMware)
6fed932e92 tools lib traceevent, perf tools: Rename 'enum pevent_flag' to 'enum tep_flag'
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
pevent_get_page_size API and enum pevent_flag to enum tep_flag

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.623942406@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:22:18 -03:00
Tzvetomir Stoyanov (VMware)
fc9b69710e tools lib traceevent, perf tools: Rename traceevent_* APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "traceevent_". This
changes APIs: traceevent_host_bigendian, traceevent_load_plugins and
traceevent_unload_plugins

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.484691639@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:22:16 -03:00
Tzvetomir Stoyanov (VMware)
ece2a4f483 tools lib traceevent, perf tools: Rename pevent_set_* APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_set_file_bigendian, pevent_set_flag,
pevent_set_function_resolver, pevent_set_host_bigendian,
pevent_set_long_size, pevent_set_page_size and pevent_get_long_size

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.256265951@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:22:10 -03:00
Tzvetomir Stoyanov (VMware)
13a418904e tools lib traceevent, perf tools: Rename pevent_register_* APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_register_comm, pevent_register_print_string

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.948980691@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:22:08 -03:00
Tzvetomir Stoyanov (VMware)
59c1baee25 tools lib traceevent, perf tools: Rename pevent_read_number_* APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_read_number, pevent_read_number_field

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.804271434@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:22:05 -03:00
Tzvetomir Stoyanov (VMware)
6a48dc298e tools lib traceevent, perf tools: Rename pevent print APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_print_field, pevent_print_fields, pevent_print_funcs,
pevent_print_printk

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.654453763@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:22:01 -03:00
Tzvetomir Stoyanov (VMware)
c60167c187 tools lib traceevent, perf tools: Rename pevent parse APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_parse_event, pevent_parse_format, pevent_parse_header_page

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.469749700@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:21:57 -03:00
Tzvetomir Stoyanov (VMware)
af85cd1952 tools lib traceevent, perf tools: Rename pevent find APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_find_any_field, pevent_find_common_field,
pevent_find_event, pevent_find_field

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.316995920@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:21:51 -03:00
Tzvetomir Stoyanov (VMware)
4d5c58b15c tools lib traceevent, perf tools: Rename pevent alloc / free APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_alloc, pevent_free, pevent_event_info and pevent_func_resolver_t

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.152609945@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:21:43 -03:00
Tzvetomir Stoyanov (VMware)
c32d52b464 tools lib traceevent, perf tools: Rename pevent plugin related APIs
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
the pevent plugin related API.

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.005287044@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:21:39 -03:00
Tzvetomir Stoyanov (VMware)
cbc49b25b9 tools lib traceevent, perf tools: Rename 'struct pevent_record' to 'struct tep_record'
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
the 'struct pevent_record' to 'struct tep_record'.

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180659.866021298@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13 15:21:13 -03:00
Linus Torvalds
b99cdfdf0b Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Thomas Gleixner:
 "A large update to RCU:

  Preparatory work for consolidating the RCU flavors:

   - Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt,
     and RCU-sched flavors, replacing the old ->gpnum and ->completed
     pair of fields.

     This change allows lockless code to obtain the complete
     grace-period state with a single READ_ONCE(), which is needed to
     maintain tolerable lock contention during the upcoming
     consolidation of the three RCU flavors.

     Note that grace-period sequence numbers are already used by
     rcu_barrier(), expedited RCU grace periods, and SRCU, and are thus
     already heavily used and well-tested. Joel Fernandes contributed a
     number of excellent fixes and improvements.

   - Clean up some grace-period-reporting loose ends, including
     improving the handling of quiescent states from offline CPUs and
     fixing some false-positive WARN_ON_ONCE() invocations.

     (Strictly speaking, the WARN_ON_ONCE() invocations were quite
     correct, but their invariants were (harmlessly) violated by the
     earlier sloppy handling of quiescent states from offline CPUs.)

     In addition, improve grace-period forward-progress guarantees so as
     to allow removal of fail-safe checks that required otherwise
     needless lock acquisitions. Finally, add more diagnostics to help
     debug the upcoming consolidation of the RCU-bh, RCU-preempt, and
     RCU-sched flavors.

  The rest:

   - SRCU updates

   - Updates to rcutorture and associated scripting.

   - The usual pile of miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
  rcutorture: Fix rcu_barrier successes counter
  rcutorture: Add support to detect if boost kthread prio is too low
  rcutorture: Use monotonic timestamp for stall detection
  rcutorture: Make boost test more robust
  rcutorture: Disable RT throttling for boost tests
  rcutorture: Emphasize testing of single reader protection type
  rcutorture: Handle extended read-side critical sections
  rcutorture: Make rcu_torture_timer() use rcu_torture_one_read()
  rcutorture: Use per-CPU random state for rcu_torture_timer()
  rcutorture: Use atomic increment for n_rcu_torture_timers
  rcutorture: Extract common code from rcu_torture_reader()
  rcuperf: Remove unused torturing_tasks() function
  rcu: Remove rcutorture test version and sequence number
  rcutorture: Change units of onoff_interval to jiffies
  rcu: Assign higher prio to RCU threads if rcutorture is built-in
  rculist: Improve documentation for list_for_each_entry_from_rcu()
  srcu: Add grace-period number to rcutorture statistics printout
  rcu: Print stall-warning NMI dyntick state in hexadecimal
  MAINTAINERS: Update RCU, SRCU, and TORTURE-TEST entries
  rcu: Make rcu_seq_diff() more exact
  ...
2018-08-13 10:49:41 -07:00
David S. Miller
c1617fb4c5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-08-13

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add driver XDP support for veth. This can be used in conjunction with
   redirect of another XDP program e.g. sitting on NIC so the xdp_frame
   can be forwarded to the peer veth directly without modification,
   from Toshiaki.

2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT
   in order to provide more control and visibility on where a SO_REUSEPORT
   sk should be located, and the latter enables to directly select a sk
   from the bpf map. This also enables map-in-map for application migration
   use cases, from Martin.

3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id
   of cgroup v2 that is the ancestor of the cgroup associated with the
   skb at the ancestor_level, from Andrey.

4) Implement BPF fs map pretty-print support based on BTF data for regular
   hash table and LRU map, from Yonghong.

5) Decouple the ability to attach BTF for a map from the key and value
   pretty-printer in BPF fs, and enable further support of BTF for maps for
   percpu and LPM trie, from Daniel.

6) Implement a better BPF sample of using XDP's CPU redirect feature for
   load balancing SKB processing to remote CPU. The sample implements the
   same XDP load balancing as Suricata does which is symmetric hash based
   on IP and L4 protocol, from Jesper.

7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s
   critical path as it is ensured that the allocator is present, from Björn.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13 10:07:23 -07:00
Helge Deller
93cb8e20d5 parisc: Drop architecture-specific ENOTSUP define
parisc is the only Linux architecture which has defined a value for ENOTSUP.
All other architectures #define ENOTSUP as EOPNOTSUPP in their libc headers.

Having an own value for ENOTSUP which is different than EOPNOTSUPP often gives
problems with userspace programs which expect both to be the same.  One such
example is a build error in the libuv package, as can be seen in
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900237.

Since we dropped HP-UX support, there is no real benefit in keeping an own
value for ENOTSUP. This patch drops the parisc value for ENOTSUP from the
kernel sources. glibc needs no patch, it reuses the exported headers.

Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-13 09:30:41 +02:00
Andrey Ignatov
5ecd8c2273 selftests/bpf: Selftest for bpf_skb_ancestor_cgroup_id
Add selftests for bpf_skb_ancestor_cgroup_id helper.

test_skb_cgroup_id.sh prepares testing interface and adds tc qdisc and
filter for it using BPF object compiled from test_skb_cgroup_id_kern.c
program.

BPF program in test_skb_cgroup_id_kern.c gets ancestor cgroup id using
the new helper at different levels of cgroup hierarchy that skb belongs
to, including root level and non-existing level, and saves it to the map
where the key is the level of corresponding cgroup and the value is its
id.

To trigger BPF program, user space program test_skb_cgroup_id_user is
run. It adds itself into testing cgroup and sends UDP datagram to
link-local multicast address of testing interface. Then it reads cgroup
ids saved in kernel for different levels from the BPF map and compares
them with those in user space. They must be equal for every level of
ancestry.

Example of run:
  # ./test_skb_cgroup_id.sh
  Wait for testing link-local IP to become available ... OK
  Note: 8 bytes struct bpf_elf_map fixup performed due to size mismatch!
  [PASS]

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-13 01:02:40 +02:00
Andrey Ignatov
02f6ac7456 selftests/bpf: Add cgroup id helpers to bpf_helpers.h
Add bpf_skb_cgroup_id and bpf_skb_ancestor_cgroup_id helpers to
bpf_helpers.h to use them in tests and samples.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-13 01:02:39 +02:00
Andrey Ignatov
539764d07b bpf: Sync bpf.h to tools/
Sync skb_ancestor_cgroup_id() related bpf UAPI changes to tools/.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-13 01:02:39 +02:00
David S. Miller
6a92ef08a1 Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net 2018-08-11 17:52:00 -07:00
Keara Leibovitz
b70f1f3af4 tc: Update README and add config
Updated README.

Added config file that contains the minimum required features enabled to
run the tests currently present in the kernel.
This must be updated when new unittests are created and require their own
modules.

Signed-off-by: Keara Leibovitz <kleib@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11 12:20:59 -07:00
Martin KaFai Lau
91134d849a bpf: Test BPF_PROG_TYPE_SK_REUSEPORT
This patch add tests for the new BPF_PROG_TYPE_SK_REUSEPORT.

The tests cover:
- IPv4/IPv6 + TCP/UDP
- TCP syncookie
- TCP fastopen
- Cases when the bpf_sk_select_reuseport() returning errors
- Cases when the bpf prog returns SK_DROP
- Values from sk_reuseport_md
- outer_map => reuseport_array

The test depends on
commit 3eee1f75f2 ("bpf: fix bpf_skb_load_bytes_relative pkt length check")

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-11 01:58:46 +02:00
Martin KaFai Lau
6bc8529c41 bpf: test BPF_MAP_TYPE_REUSEPORT_SOCKARRAY
This patch adds tests for the new BPF_MAP_TYPE_REUSEPORT_SOCKARRAY.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-11 01:58:46 +02:00
Martin KaFai Lau
3bd43a8c91 bpf: Sync bpf.h uapi to tools/
This patch sync include/uapi/linux/bpf.h to
tools/include/uapi/linux/

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-11 01:58:46 +02:00
Martin KaFai Lau
aa5f0c96cc bpf: Refactor ARRAY_SIZE macro to bpf_util.h
This patch refactors the ARRAY_SIZE macro to bpf_util.h.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-11 01:58:46 +02:00
Yonghong Song
af2a81dab4 tools/bpf: add bpffs pretty print btf test for hash/lru_hash maps
Pretty print tests for hash/lru_hash maps are added in test_btf.c.
The btf type blob is the same as pretty print array map test.
The test result:
  $ mount -t bpf bpf /sys/fs/bpf
  $ ./test_btf -p
    BTF pretty print array......OK
    BTF pretty print hash......OK
    BTF pretty print lru hash......OK
    PASS:3 SKIP:0 FAIL:0

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-10 20:54:07 +02:00
Tzvetomir Stoyanov (VMware)
096177a8b5 tools lib traceevent, perf tools: Rename struct pevent to struct tep_handle
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
the struct pevent to struct tep_handle.

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180659.706175783@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-10 15:29:35 -03:00
Sandipan Das
354b064b8e perf probe powerpc: Fix trace event post-processing
In some cases, a symbol may have multiple aliases. Attempting to add an
entry probe for such symbols results in a probe being added at an
incorrect location while it fails altogether for return probes. This is
only applicable for binaries with debug information.

During the arch-dependent post-processing, the offset from the start of
the symbol at which the probe is to be attached is determined and added
to the start address of the symbol to get the probe's location.  In case
there are multiple aliases, this offset gets added multiple times for
each alias of the symbol and we end up with an incorrect probe location.

This can be verified on a powerpc64le system as shown below.

  $ nm /lib/modules/$(uname -r)/build/vmlinux | grep "sys_open$"
  ...
  c000000000414290 T __se_sys_open
  c000000000414290 T sys_open

  $ objdump -d /lib/modules/$(uname -r)/build/vmlinux | grep -A 10 "<__se_sys_open>:"

  c000000000414290 <__se_sys_open>:
  c000000000414290:       19 01 4c 3c     addis   r2,r12,281
  c000000000414294:       70 c4 42 38     addi    r2,r2,-15248
  c000000000414298:       a6 02 08 7c     mflr    r0
  c00000000041429c:       e8 ff a1 fb     std     r29,-24(r1)
  c0000000004142a0:       f0 ff c1 fb     std     r30,-16(r1)
  c0000000004142a4:       f8 ff e1 fb     std     r31,-8(r1)
  c0000000004142a8:       10 00 01 f8     std     r0,16(r1)
  c0000000004142ac:       c1 ff 21 f8     stdu    r1,-64(r1)
  c0000000004142b0:       78 23 9f 7c     mr      r31,r4
  c0000000004142b4:       78 1b 7e 7c     mr      r30,r3

  For both the entry probe and the return probe, the probe location
  should be _text+4276888 (0xc000000000414298). Since another alias
  exists for 'sys_open', the post-processing code will end up adding
  the offset (8 for powerpc64le) twice and perf will attempt to add
  the probe at _text+4276896 (0xc0000000004142a0) instead.

Before:

  # perf probe -v -a sys_open

  probe-definition(0): sys_open
  symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
  Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
  Try to find probe point from debuginfo.
  Symbol sys_open address found : c000000000414290
  Matched function: __se_sys_open [2ad03a0]
  Probe point found: __se_sys_open+0
  Found 1 probe_trace_events.
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Writing event: p:probe/sys_open _text+4276896
  Added new event:
    probe:sys_open       (on sys_open)
  ...

  # perf probe -v -a sys_open%return $retval

  probe-definition(0): sys_open%return
  symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
  Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
  Try to find probe point from debuginfo.
  Symbol sys_open address found : c000000000414290
  Matched function: __se_sys_open [2ad03a0]
  Probe point found: __se_sys_open+0
  Found 1 probe_trace_events.
  Opening /sys/kernel/debug/tracing/README write=0
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Parsing probe_events: p:probe/sys_open _text+4276896
  Group:probe Event:sys_open probe:p
  Writing event: r:probe/sys_open__return _text+4276896
  Failed to write event: Invalid argument
    Error: Failed to add events. Reason: Invalid argument (Code: -22)

After:

  # perf probe -v -a sys_open

  probe-definition(0): sys_open
  symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
  Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
  Try to find probe point from debuginfo.
  Symbol sys_open address found : c000000000414290
  Matched function: __se_sys_open [2ad03a0]
  Probe point found: __se_sys_open+0
  Found 1 probe_trace_events.
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Writing event: p:probe/sys_open _text+4276888
  Added new event:
    probe:sys_open       (on sys_open)
  ...

  # perf probe -v -a sys_open%return $retval

  probe-definition(0): sys_open%return
  symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
  Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
  Try to find probe point from debuginfo.
  Symbol sys_open address found : c000000000414290
  Matched function: __se_sys_open [2ad03a0]
  Probe point found: __se_sys_open+0
  Found 1 probe_trace_events.
  Opening /sys/kernel/debug/tracing/README write=0
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Parsing probe_events: p:probe/sys_open _text+4276888
  Group:probe Event:sys_open probe:p
  Writing event: r:probe/sys_open__return _text+4276888
  Added new event:
    probe:sys_open__return (on sys_open%return)
  ...

Reported-by: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 99e608b595 ("perf probe ppc64le: Fix probe location when using DWARF")
Link: http://lkml.kernel.org/r/20180809161929.35058-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-09 14:40:11 -03:00
Ido Schimmel
3dd9157056 selftests: mlxsw: Add TC flower test for Spectrum-2
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09 10:36:10 -07:00
Masami Hiramatsu
01675e9503 selftests/ftrace: Fix kprobe string testcase to not probe notrace function
Fix kprobe string argument testcase to not probe notrace
function. Instead, it probes tracefs function which must
be available with ftrace.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-08-09 11:26:33 -06:00
Anders Roxell
9a29ad52d5 selftests: mount: remove no longer needed config option
Since commit eedf265aa0 ("devpts: Make each mount of devpts an
independent filesystem.") CONFIG_DEVPTS_MULTIPLE_INSTANCES isn't needed
in the defconfig anymore.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-08-09 11:26:07 -06:00
Anders Roxell
a0dde8be2a selftests: cgroup: add gitignore file
Add the executable 'test_memcontrol' to a .gitignore file.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-08-09 11:23:32 -06:00
Claudio
d863cb03fc Add cgroup core selftests
This commit adds tests for some of the core functionalities
of cgroups v2.

The commit adds tests for some core principles of croup V2 API:

- test_cgcore_internal_process_constraint

  Tests internal process constraint.
  You can't add a pid to a domain parent if a controller is enabled.

- test_cgcore_top_down_constraint_enable

   Tests that you can't enable a controller on a child if it's not enabled
   on the parent.

- test_cgcore_top_down_constraint_disable

  Tests that you can't disable a controller on a parent if it's
  enabled in a child.

- test_cgcore_no_internal_process_constraint_on_threads

  Tests that there's no internal process constrain on threaded cgroups.
  You can add threads/processes on a parent with a controller enabled.

- test_cgcore_parent_becomes_threaded

  Tests that when a child becomes threaded the parent type becomes
  domain threaded.

- test_cgcore_invalid_domain

  In a situation like:

  A (domain threaded) - B (threaded) - C (domain)

  it tests that C can't be used until it is turned into a threaded cgroup.
  The "cgroup.type" file will report "domain (invalid)" in these cases.
  Operations which fail due to invalid topology use EOPNOTSUPP as the errno.

- test_cgcore_populated

  In a situation like:

  A(0) - B(0) - C(1)
         \ D(0)

  It tests that A, B and C's "populated" fields would be 1 while D's 0.
  It tests that after the one process in C is moved to root, A,B and C's
  "populated" fields would flip to "0" and file modified events will
  be generated on the "cgroup.events" files of both cgroups.

Signed-off-by: Claudio Zumbo <claudioz@fb.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-08-09 09:12:45 -06:00
David Woodhouse
e24f14b0ff tools headers: Synchronise x86 cpufeatures.h for L1TF additions
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2018-08-09 07:56:32 +01:00
Vasily Gorbik
4c14d1ce17 rseq/selftests: add s390 support
Implement support for s390 in the rseq selftests, in order to sanity
check the recently enabled rseq syscall. The Implementation covers both
64-bit and 31-bit mode.

Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-08-09 07:59:05 +02:00
Daniel Borkmann
3c6ed988fd bpf, sockmap: fix cork timeout for select due to epipe
I ran into the same issue as a009f1f396 ("selftests/bpf:
test_sockmap, timing improvements") where I had a broken
pipe error on the socket due to remote end timing out on
select and then shutting down it's sockets while the other
side was still sending. We may need to do a bigger rework
in general on the test_sockmap.c, but for now increase it
to a more suitable timeout.

Fixes: a18fda1a62 ("bpf: reduce runtime of test_sockmap tests")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-08 12:06:17 -07:00
Konstantin Khlebnikov
6a9405b56c perf map: Optimize maps__fixup_overlappings()
This function splits and removes overlapping areas.

Maps in tree are ordered by start address thus we could find first
overlap and stop if next map does not overlap.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/153365189407.435244.7234821822450484712.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:56:00 -03:00
Konstantin Khlebnikov
e5adfc3e7e perf map: Synthesize maps only for thread group leader
Threads share map_groups, all map events are merged into it.

Thus we could send mmaps only for thread group leader.  Otherwise it
took ages to attach and record something from processes with many vmas
and threads.

Thread group leader could be already dead, but it seems perf cannot
handle this case anyway.

Testing dummy:

  #include <stdio.h>
  #include <stdlib.h>
  #include <sys/mman.h>
  #include <pthread.h>
  #include <unistd.h>

  void *thread(void *arg) {
          pause();
  }

  int main(int argc, char **argv) {
        int threads = 10000;
        int vmas = 50000;
        pthread_t th;
        for (int i = 0; i < threads; i++)
                pthread_create(&th, NULL, thread, NULL);
        for (int i = 0; i < vmas; i++)
                mmap(NULL, 4096, (i & 1) ? PROT_READ : PROT_WRITE,
                     MAP_PRIVATE | MAP_ANONYMOUS | MAP_NORESERVE, -1, 0);
        sleep(60);
        return 0;
  }

Comment by Jiri Olsa:

We actualy synthesize the group leader (if we found one) for the thread
even if it's not present in the thread_map, so the process maps are
always in data.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/153363294102.396323.6277944760215058174.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:59 -03:00
Arnaldo Carvalho de Melo
88cf7084f9 perf trace: Wire up the augmented syscalls with the syscalls:sys_enter_FOO beautifier
We just check that the evsel is the one we associated with the
bpf-output event associated with the "__augmented_syscalls__" eBPF map,
to show that the formatting is done properly:

  # perf trace -e perf/tools/perf/examples/bpf/augmented_syscalls.c,openat cat /etc/passwd > /dev/null
     0.000 (         ): __augmented_syscalls__:dfd: CWD, filename: 0x43e06da8, flags: CLOEXEC
     0.006 (         ): syscalls:sys_enter_openat:dfd: CWD, filename: 0x43e06da8, flags: CLOEXEC
     0.007 ( 0.004 ms): cat/11486 openat(dfd: CWD, filename: 0x43e06da8, flags: CLOEXEC                 ) = 3
     0.029 (         ): __augmented_syscalls__:dfd: CWD, filename: 0x4400ece0, flags: CLOEXEC
     0.030 (         ): syscalls:sys_enter_openat:dfd: CWD, filename: 0x4400ece0, flags: CLOEXEC
     0.031 ( 0.004 ms): cat/11486 openat(dfd: CWD, filename: 0x4400ece0, flags: CLOEXEC                 ) = 3
     0.249 (         ): __augmented_syscalls__:dfd: CWD, filename: 0xc3700d6
     0.250 (         ): syscalls:sys_enter_openat:dfd: CWD, filename: 0xc3700d6
     0.252 ( 0.003 ms): cat/11486 openat(dfd: CWD, filename: 0xc3700d6                                  ) = 3
  #

Now we just need to get the full blown enter/exit handlers to check if the
evsel being processed is the augmented_syscalls one to go pick the pointer
payloads from the end of the payload.

We also need to state somehow what is the layout for multi pointer arg syscalls.

Also handy would be to have a BTF file with the struct definitions used in
syscalls, compact, generated at kernel built time and available for use in eBPF
programs.

Till we get there we can go on doing some manual coupling of the most relevant
syscalls with some hand built beautifiers.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-r6ba5izrml82nwfmwcp7jpkm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:59 -03:00
Arnaldo Carvalho de Melo
d3d1c4bdf5 perf trace: Setup the augmented syscalls bpf-output event fields
The payload that is put in place by the eBPF script attached to
syscalls:sys_enter_openat (and other syscalls with pointers, in the
future) can be consumed by the existing sys_enter beautifiers if
evsel->priv is setup with a struct syscall_tp with struct tp_fields for
the 'syscall_id' and 'args' fields expected by the beautifiers, this
patch does just that.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-xfjyog8oveg2fjys9r1yy1es@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:58 -03:00
Arnaldo Carvalho de Melo
78e890ea86 perf bpf: Make bpf__setup_output_event() return the bpf-output event
We're calling it to setup that event, and we'll need it later to decide
if the bpf-output event we're handling is the one setup for a specific
purpose, return it using ERR_PTR, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zhachv7il2n1lopt9aonwhu7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:58 -03:00
Arnaldo Carvalho de Melo
e0b6d2ef32 perf trace: Handle "bpf-output" events associated with "__augmented_syscalls__" BPF map
Add an example BPF script that writes syscalls:sys_enter_openat raw
tracepoint payloads augmented with the first 64 bytes of the "filename"
syscall pointer arg.

Then catch it and print it just like with things written to the
"__bpf_stdout__" map associated with a PERF_COUNT_SW_BPF_OUTPUT software
event, by just letting the default tracepoint handler in 'perf trace',
trace__event_handler(), to use bpf_output__fprintf(trace, sample), just
like it does with all other PERF_COUNT_SW_BPF_OUTPUT events, i.e. just
do a dump on the payload, so that we can check if what is being printed
has at least the first 64 bytes of the "filename" arg:

The augmented_syscalls.c eBPF script:

  # cat tools/perf/examples/bpf/augmented_syscalls.c
  // SPDX-License-Identifier: GPL-2.0

  #include <stdio.h>

  struct bpf_map SEC("maps") __augmented_syscalls__ = {
       .type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
       .key_size = sizeof(int),
       .value_size = sizeof(u32),
       .max_entries = __NR_CPUS__,
  };

  struct syscall_enter_openat_args {
	unsigned long long common_tp_fields;
	long		   syscall_nr;
	long		   dfd;
	char		   *filename_ptr;
	long		   flags;
	long		   mode;
  };

  struct augmented_enter_openat_args {
	struct syscall_enter_openat_args args;
	char				 filename[64];
  };

  int syscall_enter(openat)(struct syscall_enter_openat_args *args)
  {
	struct augmented_enter_openat_args augmented_args;

	probe_read(&augmented_args.args, sizeof(augmented_args.args), args);
	probe_read_str(&augmented_args.filename, sizeof(augmented_args.filename), args->filename_ptr);
	perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU,
			  &augmented_args, sizeof(augmented_args));
	return 1;
  }

  license(GPL);
  #

So it will just prepare a raw_syscalls:sys_enter payload for the
"openat" syscall.

This will eventually be done for all syscalls with pointer args,
globally or just when the user asks, using some spec, which args of
which syscalls it wants "expanded" this way, we'll probably start with
just all the syscalls that have char * pointers with familiar names, the
ones we already handle with the probe:vfs_getname kprobe if it is in
place hooking the kernel getname_flags() function used to copy from user
the paths.

Running it we get:

  # perf trace -e perf/tools/perf/examples/bpf/augmented_syscalls.c,openat cat /etc/passwd > /dev/null
     0.000 (         ): __augmented_syscalls__:X?.C......................`\..................../etc/ld.so.cache..#......,....ao.k...............k......1.".........
     0.006 (         ): syscalls:sys_enter_openat:dfd: CWD, filename: 0x5c600da8, flags: CLOEXEC
     0.008 ( 0.005 ms): cat/31292 openat(dfd: CWD, filename: 0x5c600da8, flags: CLOEXEC                 ) = 3
     0.036 (         ): __augmented_syscalls__:X?.C.......................\..................../lib64/libc.so.6......... .\....#........?.......=.C..../.".........
     0.037 (         ): syscalls:sys_enter_openat:dfd: CWD, filename: 0x5c808ce0, flags: CLOEXEC
     0.039 ( 0.007 ms): cat/31292 openat(dfd: CWD, filename: 0x5c808ce0, flags: CLOEXEC                 ) = 3
     0.323 (         ): __augmented_syscalls__:X?.C.....................P....................../etc/passwd......>.C....@................>.C.....,....ao.>.C........
     0.325 (         ): syscalls:sys_enter_openat:dfd: CWD, filename: 0xe8be50d6
     0.327 ( 0.004 ms): cat/31292 openat(dfd: CWD, filename: 0xe8be50d6                                 ) = 3
  #

We need to go on optimizing this to avoid seding trash or zeroes in the
pointer content payload, using the return from bpf_probe_read_str(), but
to keep things simple at this stage and make incremental progress, lets
leave it at that for now.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-g360n1zbj6bkbk6q0qo11c28@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:57 -03:00
Arnaldo Carvalho de Melo
8fa25f303a perf bpf: Add wrappers to BPF_FUNC_probe_read(_str) functions
Will be used shortly in the augmented syscalls work together with a
PERF_COUNT_SW_BPF_OUTPUT software event to insert syscalls + pointer
contents in the perf ring buffer, to be consumed by 'perf trace'
beautifiers.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ajlkpz4cd688ulx1u30htkj3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:57 -03:00
Arnaldo Carvalho de Melo
aa31be3a48 perf bpf: Add bpf__setup_output_event() strerror() counterpart
That is just bpf__strerror_setup_stdout() renamed to the more general
"setup_output_event" method, keep the existing stdout() as a wrapper.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-nwnveo428qn0b48axj50vkc7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:56 -03:00
Arnaldo Carvalho de Melo
92bbe8d834 perf bpf: Generalize bpf__setup_stdout()
We will use it to set up other bpf-output events, for instance to
generate augmented syscall entry tracepoints with pointer contents.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4r7kw0nsyi4vyz6xm1tzx6a3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:56 -03:00
Arnaldo Carvalho de Melo
5941d856a9 perf bpf: Make bpf__for_each_stdout_map() generic
By passing a 'name' arg, that will eventually be used to setup more
"bpf-output" events, e.g. to create a event where to create raw_syscalls
like events that in addition to the syscall arguments will also copy the
pointer contents being passed from/to userspace.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-talrnxps9p3qozk3aeh91fgv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:55 -03:00
Arnaldo Carvalho de Melo
53a5d7b800 perf bpf: Add bpf/stdio.h wrapper to bpf_perf_event_output function
That, together with the map __bpf_output__ that is already handled by
'perf trace' to print that event's contents as strings provides a
debugging facility, to show it in use, print a simple string everytime
the syscalls:sys_enter_openat() syscall tracepoint is hit:

  # cat tools/perf/examples/bpf/hello.c
  #include <stdio.h>

  int syscall_enter(openat)(void *args)
  {
	  puts("Hello, world\n");
	  return 0;
  }

  license(GPL);
  #
  # perf trace -e openat,tools/perf/examples/bpf/hello.c cat /etc/passwd > /dev/null
     0.016 (         ): __bpf_stdout__:Hello, world
     0.018 ( 0.010 ms): cat/9079 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC) = 3
     0.057 (         ): __bpf_stdout__:Hello, world
     0.059 ( 0.011 ms): cat/9079 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: CLOEXEC) = 3
     0.417 (         ): __bpf_stdout__:Hello, world
     0.419 ( 0.009 ms): cat/9079 openat(dfd: CWD, filename: /etc/passwd) = 3
  #

This is part of an ongoing experimentation on making eBPF scripts as
consumed by perf to be as concise as possible and using familiar
concepts such as stdio.h functions, that end up just wrapping the
existing BPF functions, trying to hide as much boilerplate as possible
while using just conventions and C preprocessor tricks.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4tiaqlx5crf0fwpe7a6j84x7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:55 -03:00
Arnaldo Carvalho de Melo
7402e543a7 perf bpf: Add struct bpf_map struct
A helper structure used by eBPF C program to describe map attributes to
elf_bpf loader, to be used initially by the special __bpf_stdout__ map
used to print strings into the perf ring buffer in BPF scripts, e.g.:

Using the upcoming stdio.h and puts() macros to use the __bpf_stdout__
map to add strings to the ring buffer:

  # cat tools/perf/examples/bpf/hello.c
  #include <stdio.h>

  int syscall_enter(openat)(void *args)
  {
	  puts("Hello, world\n");
	  return 0;
  }

  license(GPL);
  #
  # cat ~/.perfconfig
  [llvm]
	dump-obj = true
  # perf trace -e openat,tools/perf/examples/bpf/hello.c/call-graph=dwarf/ cat /etc/passwd > /dev/null
  LLVM: dumping tools/perf/examples/bpf/hello.o
     0.016 (         ): __bpf_stdout__:Hello, world
     0.018 ( 0.010 ms): cat/9079 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC           ) = 3
     0.057 (         ): __bpf_stdout__:Hello, world
     0.059 ( 0.011 ms): cat/9079 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: CLOEXEC           ) = 3
     0.417 (         ): __bpf_stdout__:Hello, world
     0.419 ( 0.009 ms): cat/9079 openat(dfd: CWD, filename: /etc/passwd                                ) = 3
  #
  # file tools/perf/examples/bpf/hello.o
  tools/perf/examples/bpf/hello.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped
   # readelf -SW tools/perf/examples/bpf/hello.o
  There are 10 section headers, starting at offset 0x208:

  Section Headers:
    [Nr] Name              Type            Address          Off    Size   ES Flg Lk Inf Al
    [ 0]                   NULL            0000000000000000 000000 000000 00      0   0  0
    [ 1] .strtab           STRTAB          0000000000000000 000188 00007f 00      0   0  1
    [ 2] .text             PROGBITS        0000000000000000 000040 000000 00  AX  0   0  4
    [ 3] syscalls:sys_enter_openat PROGBITS        0000000000000000 000040 000088 00  AX  0   0  8
    [ 4] .relsyscalls:sys_enter_openat REL             0000000000000000 000178 000010 10      9   3  8
    [ 5] maps              PROGBITS        0000000000000000 0000c8 00001c 00  WA  0   0  4
    [ 6] .rodata.str1.1    PROGBITS        0000000000000000 0000e4 00000e 01 AMS  0   0  1
    [ 7] license           PROGBITS        0000000000000000 0000f2 000004 00  WA  0   0  1
    [ 8] version           PROGBITS        0000000000000000 0000f8 000004 00  WA  0   0  4
    [ 9] .symtab           SYMTAB          0000000000000000 000100 000078 18      1   1  8
  Key to Flags:
    W (write), A (alloc), X (execute), M (merge), S (strings), I (info),
    L (link order), O (extra OS processing required), G (group), T (TLS),
    C (compressed), x (unknown), o (OS specific), E (exclude),
    p (processor specific)
    # readelf -s tools/perf/examples/bpf/hello.o

  Symbol table '.symtab' contains 5 entries:
   Num:    Value          Size Type    Bind   Vis      Ndx Name
     0: 0000000000000000     0 NOTYPE  LOCAL  DEFAULT  UND
     1: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT    5 __bpf_stdout__
     2: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT    7 _license
     3: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT    8 _version
     4: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT    3 syscall_enter_openat
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-81fg60om2ifnatsybzwmiga3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:54 -03:00
Jiri Olsa
e6902d1b73 perf report: Add --percent-type option
Set annotation percent type from following choices:

  global-period, local-period, global-hits, local-hits

With following report option setup the percent type will be passed to
annotation browser:

  $ perf report --percent-type period-local

The local/global keywords set if the percentage is computed in the scope
of the function (local) or the whole data (global).  The period/hits
keywords set the base the percentage is computed on - the samples period
or the number of samples (hits).

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:54 -03:00
Jiri Olsa
88c2119077 perf annotate: Add --percent-type option
Add --percent-type option to set annotation percent type from following
choices:

  global-period, local-period, global-hits, local-hits

Examples:

  $ perf annotate --percent-type period-local --stdio | head -1
   Percent         |      Source code ... es, percent: local period)
  $ perf annotate --percent-type hits-local --stdio | head -1
   Percent         |      Source code ... es, percent: local hits)
  $ perf annotate --percent-type hits-global --stdio | head -1
   Percent         |      Source code ... es, percent: global hits)
  $ perf annotate --percent-type period-global --stdio | head -1
   Percent         |      Source code ... es, percent: global period)

The local/global keywords set if the percentage is computed in the scope
of the function (local) or the whole data (global).

The period/hits keywords set the base the percentage is computed on -
the samples period or the number of samples (hits).

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:53 -03:00
Jiri Olsa
4c04868fbe perf annotate: Display percent type in stdio output
In following patches we will allow to switch percent type even for stdio
annotation outputs. Adding the percent type value into the annotation
outputs title.

  $ perf annotate --stdio
   Percent         |      Sou ... instructions:u } (2805 samples, percent: local period)
  --------------------------- ... ------------------------------------------------------
  ...

  $ perf annotate --stdio2
  Samples: 2K of events 'anon ...  count (approx.): 156525487, [percent: local period]
  safe_write.c() /usr/bin/yes
  Percent
  ...

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:53 -03:00
Jiri Olsa
addba8b66f perf annotate: Make local period the default percent type
Currently we display the percentages in annotation output based on
number of samples hits. Switching it to period based percentage by
default, because it corresponds more to the time spent on the line.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:52 -03:00
Jiri Olsa
3e0d795319 perf annotate: Add support to toggle percent type
Add new key bindings to toggle percent type/base in annotation UI browser:

 'p' to switch between local and global percent type
 'b' to switch between hits and perdio percent base

Add the following help messages to the UI browser '?' window:

  ...
  p             Toggle percent type [local/global]
  b             Toggle percent base [period/hits]
  ...

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-17-jolsa@kernel.org
[ Moved percent_type to be the last arg to sym_title(), its an arg to what is being formmated (buf, size) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:52 -03:00
Jiri Olsa
d4265b1a1b perf annotate: Pass browser percent_type in annotate_browser__calc_percent()
Pass browser percent_type in annotate_browser__calc_percent().

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:51 -03:00
Jiri Olsa
4c650ddc2e perf annotate: Pass 'struct annotation_options' to map_symbol__annotation_dump()
Pass 'struct annotation_options' to map_symbol__annotation_dump(), to
carry on and pass the percent_type value.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:51 -03:00
Jiri Olsa
c849c12cf3 perf annotate: Pass struct annotation_options to symbol__calc_lines()
Pass struct annotation_options to symbol__calc_lines(), to carry on and
pass the percent_type value.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:50 -03:00
Jiri Olsa
796ca33d5c perf annotate: Add percent_type to struct annotation_options
It will be used to carry user selection of percent type for annotation
output.

Passing the percent_type to the annotation_line__print function as the
first step and making it default to current percentage type
(PERCENT_HITS_LOCAL) value.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:50 -03:00
Jiri Olsa
e58684df91 perf annotate: Add PERCENT_PERIOD_GLOBAL percent value
Adding and computing global period percent value for annotation line.
Storing it in struct annotation_data percent array under new
PERCENT_PERIOD_GLOBAL index.

At the moment it's not displayed, it's coming in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:49 -03:00
Jiri Olsa
ab371169fb perf annotate: Add PERCENT_PERIOD_LOCAL percent value
Adding and computing local period percent value for annotation line.
Storing it in struct annotation_data percent array under new
PERCENT_PERIOD_LOCAL index.

At the moment it's not displayed, it's coming in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:49 -03:00
Jiri Olsa
75a8c1ff28 perf annotate: Add PERCENT_HITS_GLOBAL percent value
Adding and computing global hits percent value for annotation line.
Storing it in struct annotation_data percent array under new
PERCENT_HITS_GLOBAL index.

At the moment it's not displayed, it's coming in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-08 15:55:48 -03:00